Wyze Light Strip Pro 10M Mode d'emploi

Marque: Wyze

Modèle: Light Strip Pro 10M

Catégorie: Accessoires de console de jeux

Taper: Mode d'emploi

WELCOME TO WYZE

IN THE BOX

Well, hello there! If this is your ﬁrst Wyze product, welcome to the

Wyze family! Whether you bought Wyze Light Strip Pro to add

accent lighting behind your TV, step up your TikTok game, or have a

full on rave in your living room, you have made a great choice. Now

let’s get started!

Wyze Light Strip Pro × 2

Adhesive Clips × 20

Power Adapter × 1

Alcohol Wipe × 4

Quick Start Guide × 1

SETUP

Download the Wyze app and sign in or create an account.

FCC WARNING

CAUTION

Any changes or modiﬁcations not expressly approved by the party responsible

for compliance could void the user’ s authority to operate the equipment. This

device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference,

and (2) This device must accept any interference received, including interfer-

ence that may cause undesired operation. This equipment has been tested and

found to comply with the limits for a Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment

generates uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment o and on, the user is encouraged to try to correct the

interference by one of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated

with minimum distance of 20 cm between the radiator and your body.

RF RADIATION EXPOSURE STATEMENT

This device complies with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions: (1) this device may not

cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation. The

manufacturer is not responsible for any radio or TV interference caused by

unauthorized modiﬁcations or change to this equipment. Such modiﬁcations or

change could void the user's authority to operate the equipment. This radio

transmitter (identify the device by certiﬁcation number or model number if

Category II) has been approved by Industry Canada to operate with the

antenna types listed below with the maximum permissible gain indicated.

Antenna types not included in this list, having a gain greater than the maximum

gain indicated for that type, are strictly prohibited for use with this device.

Cet appareil est conforme à la aux normes RSS de l'Industrie du Canada. Son

fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne

doit pas causer des interférences nuisibles, et (2) cet appareil doit accepter

toute interférence reçue, y compris les interférences qui peuvent provoquer un

fonctionnement indésirable. Le fabricant n'est pas responsable des toutes

interférences radio ou télévision causées par des modiﬁcations non autorisées

apportées à cet appareil. De telles modiﬁcations peuvent empêcher

ISEDC RSS WARNING

l'utilisateur d'utiliser l'appareil. Le présent émetteur radio (identiﬁer le dispositif

par son numéro de certiﬁcation ou son numéro de modèle s'il fait partie du

matériel de catégorieII) a été approuvé par Industrie Canada pour fonctionner

avec les types d'antenne énumérés cidessous et ayant un gain admissible

maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est

supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation

de l'émetteur.

This equipment complies with ISED RF radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated

with minimum distance of 20 cm between the radiator and your body.

Cet équipement est conforme aux limites de radiations déﬁnies par IC dans le

cadre d'un environnement non contrôlé. Cet équipement doit être installé et

fonctionner à une distance minimum de 20 cm de votre corps.

ISEDC RADIATION EXPOSURE STATEMENT

Alexa

To control your device with your voice, connect your Wyze account to

Alexa or Google Assistant.

Open up the Wyze app, go into your Account settings, then tap on

Smart Integrations to link Alexa to your Wyze account.

You can also link your Wyze account by asking Alexa to “Enable

Wyze skill.” If you have not downloaded the Alexa app you can

download it from the App Store or Google Play store or go to

alexa.amazon.com to search for and enable the Wyze skill.

Google Assistant

Download and conﬁgure the Home app by Google.

Launch the Home app.

Tap Add.

Tap Set up device.

Tap Works with Google.

Find the Wyze Home listing and log in with your Wyze

account.

Google Assistant will automatically sync and populate a

list of the devices from your Wyze account.

CONNECTING TO YOUR VOICE ASSISTANT

Open the Wyze app and tap the + sign on the top left corner of

the Home tab. Tap Add Device and then select Wyze Light Strip Pro.

2 Clean the desired strip mounting location with the included alcohol

wipe and allow to dry.

Connect the strips to the controller and begin mounting them

one at a time by exposing the adhesive back and pressing the strip

into place. Repeat for the second strip.

NEED HELP?

Scan the QR code

to learn more

Contact our Support Team at:

https://support.wyze.com

Join our Community:

https://wyze.com/community

Select and clean the controller’s mounting location using an

included alcohol wipe. Make sure the controller can reach both an

outlet and the desired location of the strips. Note: the controller will

go in the middle and connect to each of the two strips. Do not try to

connect the two strips together with the controller at one end, it

must be in the middle.

Uncover the controller’s adhesive backing and ﬁrmly press the

controller into place. Make sure the front and side buttons are

accessible after mounting.

Corner Installation: If installing at a 90° angle (e.g, around the back of

a TV) make a loop with the strip and reinforce each side with the

included clips. Try to avoid bending the strip where the LED is located.

Trimming the Strip: The strip can be cut to a desired length at the

designated marks. Make sure the power adapter is unplugged before

cutting.

Use the included clips to reinforce the strip. Use extras around

corners or where the strip bends.

Follow the instructions in the Wyze app to ﬁnish pairing the

device to your Wyze account.

Plug the power adapter into the wall and conﬁrm the strip is

pulsing blue. If it is not, press and hold the side button for 7 seconds

until the LED on the controller begins ﬂashing blue and yellow. If the

strip doesn’t turn on, make sure all the connections are secure.

BASIC OPERATIONS

SINGLE PRESS

Front Button

Side Button

Change Color

Toggle Mode

Power On/O

Enter Pairing Mode

LONG PRESS

• Do not leave the device on while coiled as it may overheat.

• Avoid bending the strip where an LED is located as it may damage

the product.

• Do not cut the device while it is plugged into power.

• Only mount the device onto dry, clean, and smooth surfaces.

• For indoor use only.

• Do not use if the power cord is damaged.

CONTROLLER STATUS LIGHT GUIDE

Indicator Light

Front Button

Side Button

Flashing blue & yellow

In pairing mode

Solid blue

Light strip is on

O

Light strip is o

Flashing blue

Connect to Wyze cloud or oine

Once enabled, follow the on-screen instructions to link your Wyze

account to Alexa. You will be prompted to enter your Wyze username and

password to authorize Alexa to access your camera.

Select Add Device so that Alexa can ﬁnd your device. You can also

say, “Discover my devices.” After Alexa ﬁnds your device, it’s listed under

Devices in the Smart Home section of the Alexa app.

Wyze Light Strip Pro 10M

Light strip

Controller

Power

adapter

12V

Dout

GND

12V

Din

GND