Pfaff powerquilter 1600 Mode d'emploi

User’s Guide

Stationary Machine

The informaon contained in this document is subject to change without noce. If you nd any problems

in the manual, please report them to us in wring. This document is not warranted to be error-free.

Singer Sourcing Limited LLC assumes no responsibility or liability for any errors or inaccuracies that may

appear in the informaonal content contained in this manual.

powerquilter™ 1600

User’s Guide

How to Use This Manual

Special Informaon

 NOTE: A NOTE indicates important informaon that helps you make beer use of your

powerquilter™ 1600 quilng machine.

Â IMPORTANT: An IMPORTANT note provides informaon that is essenal to properly using your

powerquilter™ 1600 quilng machine.

U CAUTION: A CAUTION indicates a potenal for causing harm to your quilng machine, the quilt,

or to yourself.

Congratulaons on Your Purchase!

Welcome to the PFAFF

®

family!

PFAFF

®

is commied to your quilng success through excellence in customer service and educaon. With

that in mind, we invite you to visit our website at www.pfa.com to learn more about the art of quilng.

Plus, you will nd ps, tricks and inspiraon on a variety of quilng topics including the basics of seng up

your machine and loading a quilt.

We invite you to share your projects with us by tagging us in your Facebook and Instagram posts - we

may even feature your post. Your new quilng friends are already there and they can’t wait to see your

creaons!

Remember, if you ever have quesons, your local retailer can help you or you can contact us by calling

(385) 777-5255.

Thank you and happy quilng!

Â IMPORTANT: These packaging materials are designed to prevent the machine from being damaged.

Keep them in case you need to bring this machine to the dealer or send it for repair.

Register Your powerquilter

™

1600 Quilng Machine

For product and warranty registraon, go to the PFAFF® web site at www.pfa.com.

Table of Contents

Congratulaons on Your Purchase! � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �1

What’s Included with Your Machine � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �4

Important Safety and Machine Informaon � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �4

Important Safety Instrucons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

To Use the Machine Safely . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

To Increase the Life of Your Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

To Repair or Adjust the Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

About your Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

General Specicaons � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �9

powerquilter™ 1600 Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Installaon and Setup � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �13

Seng up the Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Placing the Machine in the Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Installing the Foot Pedal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Installing the Thread Mast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Installing the Color Touch-Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Using Your Machine� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �16

Needle/Thread Selecon Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Changing the Hopping Foot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Threading the Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Inserng (or Changing) the Needle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Bobbin Case and Bobbin Thread Tension Adjustments � � � � � � � � � � � � � � � � � � � � � � � � � � �20

Inserng the Bobbin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Drawing the Bobbin Thread to the Top of the Quilt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Checking and Adjusng Bobbin Case Tension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Tighten Bobbin Case Tension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Easy to Set Tension Adjustment � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �22

Tighten Top Thread Tension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Loosen Top Thread Tension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Maintenance � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �23

Cleaning and Lubricang the Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Cleaning the Touch-Screen Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Using The Touch-Screen Display � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �24

Main Screen Manual Mode Buon Funcons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

(A) Pause/Play Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

(B) My Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

(C) Limit Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

(D) Presets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

(E) Basng Mode In Manual Operaon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

(F) Easy to Set Tension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

(G) Bobbin Thread Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

(H) Needle Stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

(I) Up/Down/TieO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Main Screen Regulated Mode Buon Funcons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Stches Per Inch (SPI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Basng Stches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Precision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Cruise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Tools Menu � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �29

Low Bobbin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Timer And Stch Count . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Lighng . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Calculator Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Diagnoscs Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Diagnoscs Tests � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �33

Motor Sensor Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Speed Sensor Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Moon Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Needle Sensor Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Tension Calibraon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Foot Pedal Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Language � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �36

Update � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �36

System Informaon Screen � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �37

Geng Started Quilng � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �38

Thread Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Needle Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

To Prepare for Quilng . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Troubleshoong � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �39

Appendix 1 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �45

4 | powerquilter™ 1600 Quilng Machine User’s Guide

What’s Included With Your Machine

• Bobbins (5) • 3/32 wrench

• Bobbin case • 2 mm hex wrench

• INSPIRA needles size 100/16 (pack of 10) • 2.5 mm hex wrench

• Thread tray and thread mast • 3 mm hex wrench

• Lint brush • Open-toe foot (ruler foot installed)

• Pen oiler • Bobbin Winder

• Power cord • powerquilter™ 1600 Quilng Machine

• Screwdriver

Important Safety and Machine Informaon

This device complies with Part 15 of the FCC Rules. Operaon is subject to the following two condions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operaon. See the full Declaraon of Conformity

in the Appendix.

Â IMPORTANT: Do not operate your powerquilter™ 1600 quilng machine unl you have completely

read the informaon contained in this manual. Please keep all packaging and order informaon for

warranty purposes.

IMPORTANT SAFETY INSTRUCTIONS

Read all instrucons before using this machine.

When using this machine, basic safety precauons should always be followed, including the following:

DANGER — To reduce the risk of electric shock:

• A quilng machine should never be le unaended when plugged in. Always unplug the machine from

the electrical outlet immediately aer using and before cleaning.

DANGER — Pour réduire le risque de choc électrique :

• Une machine à quilter ne doit jamais être laissée sans surveillance lorsqu'elle est branchée. Débranchez

toujours la machine de la prise électrique immédiatement après usage et avant de la nettoyer.

powerquilter™ 1600 Quilng Machine User’s Guide | 5

WARNING — To reduce the risk of burns, re, electric shock, or injury to persons:

• The powerquilter™ 1600 is heavy. Never aempt to li it alone. Always use two people when liing.

Always li from the throat of the machine.

• Always unplug the powerquilter™ 1600 from the electrical outlet when performing any maintenance,

changing the needle, removing thread locks, or when le unaended.

• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

• Keep ngers away from all moving parts. Use cauon around the needle or sharp

external components.

• Change the needle oen. Do not use bent or dull needles. “Every quilt deserves a new needle”.

• Switch the machine to the symbol o, or 0, posion to turn it o when making any adjustments in the

needle area, such as threading needle, changing needle, threading bobbin, changing hopping foot, and

so forth.

• Never drop or insert foreign objects into any opening.

• The powerquilter™ 1600 should only be used indoors away from moisture.

• The powerquilter™ 1600 should not be stored or used in extreme temperatures.

• Use the powerquilter™ 1600 only for its intended use as described in this manual.

• To disconnect from the wall outlet, push the switch to the o posion, then remove the plug from

outlet pulling from the plug, not the cord. Never operate the powerquilter™ 1600 if the cord is

damaged or not working correctly. If a mechanical or electrical problem is encountered, return the

powerquilter™ 1600 to the nearest authorized service center or the manufacturer for examinaon,

repair, electrical, or mechanical adjustment.

• It is not recommended that the powerquilter™ 1600 quilng machine be used with any machine

quilng frame other than those recommended by PFAFF®.

• Use this quilng machine only for its intended use as described in this manual. Use only aachments

recommended by the manufacturer as contained in this manual.

• Never operate the machine with any air openings blocked. Keep venlaon openings of the machine

free from the accumulaon of lint, dust, and loose cloth.

• Do not operate where aerosol (spray) products are being used or where oxygen is being administered.

• Do not pull or push the machine across the fabric excessively while stching. It may deect the needle

enough to cause it to break.

• Use only needles designed for free moon quilng and recommended by PFAFF® for this machine.

Other types of needles may break during normal quilng.

• Children shall not play with the machine. Close aenon is necessary when this machine is used by or

near children.

• This sewing machine may be used by children age 8 years and above and persons with reduced

physical, sensory, or mental capabilies or lack of experience and knowledge if they have been

given supervision or instrucon concerning use of the machine in a safe way and understand the

hazards involved.

• Cleaning and user maintenance shall not be made by children without supervision.

6 | powerquilter™ 1600 Quilng Machine User’s Guide

AVERTISSEMENT — pour réduire le risque de brûlures, d'incendie, de choc électrique ou

de blessures

• La powerquilter™ 1600 est lourde. Ne tentez jamais de la soulever seule. Utilisez toujours deux

personnes pour la soulever. Soulevez toujours la machine à partir de la gorge, non pas à partir des

poignées.

• Débranchez toujours la powerquilter™ 1600 de la prise électrique lors des travaux d'entretien, du

changement d'aiguille, de la suppression des blocages de fil, ou lorsqu'elle est laissée sans surveillance.

• Ne pas débrancher en tirant sur le cordon. Pour débrancher, saisir la fiche, non le cordon.

• N'approchez pas les doigts des parties mobiles. Faites preuve de prudence lorsque vous vous

approchez de l'aiguille ou de composants externes tranchants.

• Changez souvent d'aiguille. N'utilisez pas d'aiguilles tordues ou émoussées. « Chaque quilt mérite une

nouvelle aiguille ».

• Mettez la machine sur la position 0 ou de symbole d'arrêt pour l'éteindre lorsque vous effectuez des

réglages dans la zone de l'aiguille : enfilage de l'aiguille, changement d'aiguille, bobinage de la canette,

changement de pied, etc.

• Ne faites jamais tomber et n'insérez jamais d'objets étrangers dans une ouverture.

• La powerquilter™ 1600 doit uniquement être utilisée à l'intérieur dans un endroit non humide.

• La powerquilter™ 1600 ne doit pas être rangée ou utilisée à des températures extrêmes.

• Utilisez la powerquilter™ 1600 uniquement pour l'usage prévu indiqué dans ce manuel.

• Pour débrancher la machine de la prise murale, mettez l'interrupteur sur arrêt, puis retirez la fiche

de la prise en tirant à partir de la fiche et non du cordon. N'utilisez jamais la powerquilter™ 1600 si

le cordon est endommagé ou ne fonctionne pas correctement. En cas de problème mécanique ou

électrique, renvoyez la powerquilter™ 1600 au centre de service agréé le plus proche ou au fabricant

pour inspection, réparation ou réglage électrique ou mécanique.

• Il est déconseillé d'utiliser la machine à quilter powerquilter™ 1600 avec un autre cadre de machine à

quilter que ceux recommandés par PFAFF®.

• Utilisez cette machine à quilter uniquement pour l'usage prévu décrit dans ce manuel. Utilisez

uniquement les accessoires recommandés par le fabricant décrits dans ce manuel.

• Ne jamais utiliser la machine si des ouvertures d'air sont bloquées. Gardez les ouvertures de

ventilation de la machine exemptes d'accumulation de peluches, poussières et morceaux de tissu.

• Ne pas utiliser là où des aérosols (vaporisateurs) sont utilisés ou de l'oxygène est administré.

• Ne pas tirer ni pousser trop fort la machine sur le tissu lors de l'exécution des points. Cela pourrait

provoquer une déviation de l'aiguille et en entraîner la fracture.

• N'utilisez que les aiguilles conçues pour le quilting en piqué libre et recommandées par PFAFF® pour

cette machine. D'autres types d'aiguilles risqueraient de se fracturer au cours d'un quilting normal.

• Ne pas laisser les enfants jouer avec la machine. Une attention particulière est nécessaire lorsque cette

machine est utilisée par ou à proximité d'enfants.

• Cette machine peut être utilisée par des enfants de 8 ans et plus, ainsi que par des personnes atteintes

d'un déficit physique, sensoriel ou mental, peu expérimentées ou ayant peu de connaissances, à

condition que ces personnes reçoivent les instructions de sécurité et la supervision nécessaires à

l'utilisation de la machine et qu'elles comprennent les risques encourus.

• Les travaux de maintenance et de nettoyage ne peuvent pas être effectués par des enfants sans supervision.

powerquilter™ 1600 Quilng Machine User’s Guide | 7

Save These Instrucons

This machine is intended for household or commercial use.

Disclaimer

PFAFF® and its Retailers are in no way legally responsible or liable for damage to the powerquilter™ 1600

when used improperly or not in accordance with the guidelines stated in this manual or when used on

machine quilng frames not recommended by PFAFF®.

Oponal U.S. Grounding for Customers with 120 VAC Connecons

GROUNDED OUTLET BOXES

METAL

SCREW

ADAPTER

(B)

(C)

TAB FOR

GROUNDING

SCREW

(A)

GROUNDING PIN

This product is for use on a nominal 120 V or nominal 220 V circuit, and has a grounding plug that looks

like the plug illustrated in sketch A above. A temporary adapter, which looks like the adapter illustrated in

sketches B and C, may be used to connect this plug to a 2-pole receptacle as shown in sketch B if a properly

grounded outlet is not available. The temporary adapter should be used only unl a properly grounded

outlet can be installed by a qualied electrician. The green colored rigid ear, lug, and the like, extending

from the adapter, must be connected to a permanent ground such as a properly grounded outlet box cover.

Whenever the adapter is used, it must be held in place by the metal screw.

Â IMPORTANT: In Canada, the use of a temporary adapter is not permied by the

Canadian Electric Code.

8 | powerquilter™ 1600 Quilng Machine User’s Guide

To Use the Machine Safely

1. Carefully watch the needle when sewing. Do not touch the hand wheel, take up lever, needle,

or other moving parts.

2. Turn the machine o and unplug the cord in the following cases:

• when you have stopped using the machine

• when you replace or remove the needle or any other part

• when you check or clean the machine

• when you leave the machine unaended

3. Connect the machine directly to the wall outlet or to a surge protector that connects directly

to the wall outlet. Do not use extension cords.

To Increase the Life of Your Machine

1. Do not store this machine in areas exposed to direct sunlight or high humidity. Never use or store

the machine near a heater, an iron, a halogen lamp or other hot things.

2. Use only neutral soaps or detergents to clean the machine. Benzene, solvents and scouring powders

can damage the case and the machine and therefore should never be used.

3. Do not drop or bump the machine.

4. Always consult the manual to replace or x the hopping foot, needle or any other part of the

machine. If necessary contact an authorized PFAFF® retailer or PFAFF®

technical support.

To Repair or Adjust the Machine

If the machine breaks down or needs adjustment, rst check the troubleshoong chart at the end of this

manual to inspect and adjust the machine yourself.

For more product informaon and updates, visit our website at www.pfa.com.

The contents of this manual and product specicaons are subject to change without prior noce.

Check for updated manuals at www.pfa.com.

powerquilter™ 1600 Quilng Machine User’s Guide | 9

About Your Machine

General Specicaons

The powerquilter™ 1600 ulizes high-tech electronics and an innovave touch-pad user interface to oer

greater funconality and ease of operaon to home quilters than ever before conceived in the quilng

industry. The powerquilter™ 1600 quilng machine is a high quality machine that incorporates very robust

design features and is very easy to service.

Sewing Opening Dimensions 8.25” X 18” (210 mm X 457 mm)

Sewing Speed Maximum: 2200 SPM

Needle System 134 (135 X 7)

Hook System Rotary, Horizontal axis, M-class bobbin

Bobbin Type Aluminum, Class M

Bobbin Case Type MF

Motor Type Brushless DC

Needle Posioning Up and down, e-o stch

Electrical Power

US/Canada: 105 – 120 VAC, 47-63Hz, 300W peak

Rest of the world: 100 – 250 VAC, 47-63Hz, 300W peak

This machine conforms to UL and internaonal safety standards

for sewing machines and US and internaonal laws for

electromagnec compliance.

Outlet Power 120 was maximum

Sew Foot Stroke/Li 5 mm

Needle Bar Stroke 35.3 mm

Take-Up Stroke 73 mm

Lubricaon, main components Kluber Lube, permanent

Lubricaon of hook Velocite 10, Texaco 22

Disclaimer

PFAFF® and its Retailers are in no way legally responsible or liable for damage to the powerquilter™ 1600

when used improperly or not in accordance with the guidelines stated in this manual or when used

on machine-quilng tables not recommended by PFAFF®.

10 | powerquilter™ 1600 Quilng Machine User’s Guide

powerquilter™ 1600 Components

Front Side View

Components Not Idened

Because the powerquilter™ 1600 is upgradeable to a stand-up frame quilng system, there are components found on

the machine that are not used for staonary machine quilng (such as threaded holes for handlebars).

4

8

6

3

7

2

10

1

5

1. Thread Mast 6. Srrup Thread Guide D

2. Thread Guide A 7. Take-Up Lever

3. Three-Hole Thread Guide B 8. Thread Guide E

4. Thread Guide C 9. Front Casing/Frame

5. Top Thread Tension Assembly 10. Hand Wheel

9

powerquilter™ 1600 Quilng Machine User’s Guide | 11

Back Side View

12

19

18

17

16

15

14

22

13

21

20

12. Needle Bar 18. Presser Bar

13. Needle Bar Thread Guide 19. Front Threaded Display Mounng Holes

14. Needle 20. Back Casing/Frame

15. Ruler Foot 21. Color Touch-Screen Display Connector

16. Needle Plate 22. Threaded Horizontal Spool Pin Mounng Hole

17. Feet mount

12 | powerquilter™ 1600 Quilng Machine User’s Guide

Rear and Front Views

Rear

Front

23

24

26

27

28

25

23. On/O Switch 26. Thread Mast

24. Power Cord Connector 27. Bobbin Assembly

25. Foot Pedal Connector 28. LED Light Ring

powerquilter™ 1600 Quilng Machine User’s Guide | 13

Installaon and Setup

Seng Up the Staonary Longarm Table

The Staonary Longarm Table is designed to accommodate the powerquilter™ 1600 machine. It has legs

that are height-adjustable and is heavy enough to provide stabilizaon for quilng at high speeds.

See the instrucons provided with the Staonary Longarm Table for table assembly.

Placing the Machine in the Table

1. We recommend having someone help li and place the machine.

2. Li the machine by pung one arm through the throat space.

3. Remove the insert if in place and set the machine into the machine tray. Center the machine le to right

in the opening.

4. Slide the insert into place and move the machine unl it is aligned with the insert.

5. If necessary, adjust the machine plate to align the top of the insert with the table top. See Staonary

Longarm Table Assembly Instrucons for more informaon.

14 | powerquilter™ 1600 Quilng Machine User’s Guide

Installing the Power Cord

Check that the On/O switch is turned o

(the 0 seng). Plug the power cord into the top power

outlet on the back of the machine. Do not plug the

power cord into a power source at this me.

Installing the Foot Pedal

1. Plug in the foot pedal cord end into the foot pedal connector that is aached to the Staonary

Longarm Table.

2. Place the foot pedal under the table where operator can reach it from the front of the machine.

Installing the Thread Mast

1. Locate the two threaded holes on the le side of the

machine, near the top and towards the middle.

2. Remove the 2 screws with the 3mm hex wrench. Line

up the holes of the thread stand with the holes on the

machine and reinsert the screws.

3. Turn the thread stand unl the eyelets are posioned

over the spool pins.

 NOTE: The eyelets of the thread mast MUST be

centered over the spool pins. This ensures that the

cone of thread will not pull, turn or lt, which will

cause thread tension problems.

powerquilter™ 1600 Quilng Machine User’s Guide | 15

Installing the Color Touch-Screen

The color touch-screen comes pre-installed on its

mounng bracket.

 NOTE: Conrm that the power is turned o

before installing the color touch-screen.

1. Remove the two bolts from the bag in which they

are packed.

2. There are two holes on front of the machine

head.

3. Align the holes in the color touch-screen bracket

with the two holes on the front of the machine.

4. Use a 3mm hex wrench to insert the two bolts

through the holes of the bracket and into the

machine. Tighten in place.

5. Plug the remaining cable end into the display

connector located on the side of the machine.

6. Remove the protecve plasc from the touch-

screen before using.

16 | powerquilter™ 1600 Quilng Machine User’s Guide

Using your Machine

Needle/Thread Selecon Guide

Needle Size Threads

12 (80) Monolament, 100 wt. Silk, 60 wt. poly, mylar

14 (90) Silk (100 wt) 60 wt., monolament, glier, some metallics

16 (100) 60 wt., 50 wt., 40 wt., monolament, glier, metallics

18 (110) 50 wt., 40 wt., 30 wt., metallic

21 (125) 30 wt., 20 wt., 12 wt.

Changing the Hopping Foot

Your machine comes with two hopping feet: a ruler foot and an open-toe foot. Use the ruler foot

for ruler work and everyday quilng, and the open-toe foot when you need greater stch visibility

(such as micro quilng).

1. Remove the foot that is on the mount by using the 2.5mm hex

wrench to loosen the mounng screw far enough that you can

slide the foot o of the mount.

2. Slide the desired foot onto the mount. Note that the opening on the

side of the foot is lined up with the screw hole. Push the foot

up as far as it will go.

3. Tighten the foot rmly with the 2.5mm hex wrench.

4. Ensure the middle of the foot opening is centered with the needle

when the foot is fully ghtened with the 2.5mm hex wrench. If it isn’t

properly centered, loosen the lock nut on the foot adaptor with an

8mm wrench, center the foot with the needle; hold the foot rmly in

posion; and ghten the lock nut.

powerquilter™ 1600 Quilng Machine User’s Guide | 17

Threading the Machine

1. Place a cone or spool of thread on the spool pin. If using a spool, make sure that any slits on the spool

are against the base of the spool pin holder. Pass the thread through the thread-mast eyelet from back

to front, connuing to thread guide A.

2. Connue to the three-hole thread guide B. Beginning at the top, wrap all three holes from back to

front, hand wheel side to needle side.

 NOTE: The purpose of the three-hole thread guide B is to prevent loops of thread coming o the

thread cone from going into the top tension as a knot, causing thread breakage and bad tension.

For most threads on a cone, it is important to thread all three holes for consistent results and to

make adjustments at the top tension assembly. An excepon to this rule is when working with

very delicate threads, such as holographic or threads that are prone to breakage. You may try

skipping one or two holes on thread guide B when using these threads.

Page 12

HQ

18

Avanté User Manual

1. Place a cone or spool of thread on the spool pin.

Pass the thread through the thread-mast eyelet from

back to front, continuing to thread guide A.

(Figure 11)

2. Continue to the three-hole thread guide B. Wrap

all three holes from back to front, hand wheel side to

needle side (see Figure 12).

Note: The purpose of the three-hole thread guide B

is to prevent loops of thread coming off the thread

cone from going into the top tension as a knot caus-

ing thread breakage and bad tension. For most

threads on a cone, it is important to thread all three

holes for consistent results and to make adjust-

ments at the top tension assembly. An exception to

this rule is when working with very delicate threads,

such as holographic or threads that are prone to

breakage, in which case you may try skipping one or

two holes on thread guide B.

Threading the Machine

B

C

D

E

A

BACKFRONT

2

TENSION ASSEMBLY

TAKE UP SPRING

1

E

C

D

DETAIL 2

B

DETAIL 1

Figure 11

Figure 12

Note: See “HQ Quilting Machines Getting Started”

DVD (included with your machine) for videos show-

ing threading and other tips. These videos are also

available on www.HandiQuilter.com.

B

E

C

D

DETAIL 2

F

A

La page est en cours de chargement...

Pfaff powerquilter 1600 Mode d'emploi

Pfaff powerquilter 1600 Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents