Telit Wireless Solutions xE910 Manuel utilisateur

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

Notice

While reasonable efforts have been made to assure the accuracy of this document, Telit assumes

no liability resulting from any inaccuracies or omissions in this document, or from use of the

information obtained herein. The information in this document has been carefully checked and is

believed to be entirely reliable. However, no responsibility is assumed for inaccuracies or

omissions. Telit reserves the right to make changes to any products described herein and

reserves the right to revise this document and to make changes from time to time in content

hereof with no obligation to notify any person of revisions or changes. Telit does not assume

any liability arising out of the application or use of any product, software, or circuit described

herein; neither does it convey license under its patent rights or the rights of others.

It is possible that this publication may contain references to, or information about Telit products

(machines and programs), programming, or services that are not announced in your country.

Such references or information must not be construed to mean that Telit intends to announce

such Telit products, programming, or services in your country.

Copyrights

This instruction manual and the Telit products described in this instruction manual may be,

include or describe copyrighted Telit material, such as computer programs stored in

semiconductor memories or other media. Laws in the Italy and other countries preserve for Telit

and its licensors certain exclusive rights for copyrighted material, including the exclusive right

to copy, reproduce in any form, distribute and make derivative works of the copyrighted

material. Accordingly, any copyrighted material of Telit and its licensors contained herein or in

the Telit products described in this instruction manual may not be copied, reproduced,

distributed, merged or modified in any manner without the express written permission of Telit.

Furthermore, the purchase of Telit products shall not be deemed to grant either directly or by

implication, estoppel, or otherwise, any license under the copyrights, patents or patent

applications of Telit, as arises by operation of law in the sale of a product.

Computer Software Copyrights

The Telit and 3rd Party supplied Software (SW) products described in this instruction manual

may include copyrighted Telit and other 3rd Party supplied computer programs stored in

semiconductor memories or other media. Laws in the Italy and other countries preserve for Telit

and other 3rd Party supplied SW certain exclusive rights for copyrighted computer programs,

including the exclusive right to copy or reproduce in any form the copyrighted computer

program. Accordingly, any copyrighted Telit or other 3rd Party supplied SW computer programs

contained in the Telit products described in this instruction manual may not be copied (reverse

engineered) or reproduced in any manner without the express written permission of Telit or the

3rd Party SW supplier. Furthermore, the purchase of Telit products shall not be deemed to grant

either directly or by implication, estoppel, or otherwise, any license under the copyrights,

patents or patent applications of Telit or other 3rd Party supplied SW, except for the normal

non-exclusive, royalty free license to use that arises by operation of law in the sale of a product.

Usage and Disclosure Restrictions

License Agreements

The software described in this document is the property of Telit and its licensors. It is furnished

by express license agreement only and may be used only in accordance with the terms of such

an agreement.

Copyrighted Materials

Software and documentation are copyrighted materials. Making unauthorized copies is

prohibited by law. No part of the software or documentation may be reproduced, transmitted,

transcribed, stored in a retrieval system, or translated into any language or computer language,

in any form or by any means, without prior written permission of Telit

High Risk Materials

Components, units, or third-party products used in the product described herein are NOT fault-

tolerant and are NOT designed, manufactured, or intended for use as on-line control equipment

in the following hazardous environments requiring fail-safe controls: the operation of Nuclear

Facilities, Aircraft Navigation or Aircraft Communication Systems, Air Traffic Control, Life

Support, or Weapons Systems (High Risk Activities"). Telit and its supplier(s) specifically

disclaim any expressed or implied warranty of fitness for such High Risk Activities.

Trademarks

TELIT and the Stylized T Logo are registered in Trademark Office. All other product or service

names are the property of their respective owners.

1. INTRODUCTION ........................................................................................................................................................... 7

1.1. SCOPE ....................................................................................................................................................................... 7

1.2. AUDIENCE ................................................................................................................................................................. 7

1.3. CONTACT INFORMATION, SUPPORT ........................................................................................................................... 7

1.4. TEXT CONVENTIONS ................................................................................................................................................. 8

1.5. RELATED DOCUMENTS ............................................................................................................................................. 8

2. OVERVIEW .................................................................................................................................................................... 9

3. XE910 MINI PCI EXPRESS CARD CONNECTIONS............................................................................................. 10

3.1. PIN-OUT ................................................................................................................................................................ 10

3.2. ANTENNA CONNECTORS ......................................................................................................................................... 12

4. POWER SUPPLY ......................................................................................................................................................... 13

4.1. POWER SUPPLY REQUIREMENTS ............................................................................................................................. 13

4.2. POWER CONSUMPTION ............................................................................................................................................ 14

5. GSM/WCDMA/LTE /CDMA RADIO SECTION ..................................................................................................... 15

5.1. XE910 MINI PCI PRODUCT VARIANTS .................................................................................................................... 15

5.2. TX AND RX CHARACTERISTICS ............................................................................................................................... 15

5.3. GSM/WCDMA/LTE/CDMA ANTENNA REQUIREMENTS ...................................................................................... 16

5.3.1. GSM/WCDMA/LTE/CDMA Antenna - Installation Guidelines ..................................................................... 18

5.4. ANTENNA DIVERSITY REQUIREMENTS .................................................................................................................... 19

5.5. GNSS RECEIVER ..................................................................................................................................................... 21

5.5.1. GNSS Performances ...................................................................................................................................... 21

5.5.2. GNSS RF Front End Design .......................................................................................................................... 21

6. LOGIC LEVEL SPECIFICATIONS .......................................................................................................................... 22

7. USB PORT ..................................................................................................................................................................... 22

7.1. USB 2.0 HS ............................................................................................................................................................ 22

8. SIM INTERFACE ........................................................................................................................................................ 23

9. CONTROL SIGNALS .................................................................................................................................................. 24

9.1. WAKE# .................................................................................................................................................................. 24

9.2. W_DISABLE# ....................................................................................................................................................... 26

9.3. LED_WWAN# ....................................................................................................................................................... 26

9.4. PERST# .................................................................................................................................................................. 27

10. AUDIO SECTION OVERVIEW ............................................................................................................................ 27

10.1. ELECTRICAL CHARACTERISTICS ............................................................................................................................. 28

10.2. CODEC EXAMPLE .................................................................................................................................................. 28

11. MECHANICAL SPECIFICATIONS ..................................................................................................................... 29

11.1. WEIGHT ................................................................................................................................................................ 30

11.2. ENVIRONMENTAL REQUIREMENTS .............................................................................................................. 30

12. PACKING SYSTEM ................................................................................................................................................ 31

13. SAFETY RECOMMANDATIONS ......................................................................................................................... 32

14. CONFORMITY ASSESSMENT ISSUES .............................................................................................................. 33

1.1 1999/5/EC DIRECTIVE (HE910) ..................................................................................................................................... 33

14.1. FCC/IC REGULATORY NOTICES (HE910) ............................................................................................................... 36

1.2 1999/5/EC DIRECTIVE (LE910) ..................................................................................................................................... 38

14.2. FCC/IC REGULATORY NOTICES (LE910) ................................................................................................................ 41

14.3. CONFORMITY ASSESSMENT ISSUES / PROBLÈMES D'ÉVALUATION DE CONFORMITÉ (DE910) ................................. 44

14.4. SAFETY RECOMMENDATIONS (DE910) ................................................................................................................... 46

15. DOCUMENT HISTORY ......................................................................................................................................... 47

The aim of this document is the description of some hardware solutions useful for developing a

product with the Telit xE910 Mini PCIe Adapter.

This document is intended for Telit customers, who are integrators, about to implement their

applications using our xE910 Mini PCIe Adapter.

For general contact, technical support, to report documentation errors and to order manuals,

contact Telit’s Technical Support Center (TTSC) at:

TS-[email protected]

TS-NORTHAMERI[email protected]

TS-LATINAMERI[email protected]

TS-[email protected]

Alternatively, use:

http://www.telit.com/en/products/technical-support-center/contact.php

For detailed information about where you can buy the Telit modules or for recommendations on

accessories and components visit:

http://www.telit.com

To register for product news and announcements or for product questions contact Telit’s

Technical Support Center (TTSC).

Our aim is to make this guide as helpful as possible. Keep us informed of your comments and

suggestions for improvements.

Telit appreciates feedback from the users of our information.

Danger – This information MUST be followed or catastrophic equipment failure or bodily

injury may occur.

Caution or Warning – Alerts the user to important points about integrating the module, if

these points are not followed, the module and end user equipment may fail or malfunction.

Tip or Information – Provides advice and suggestions that may be useful when integrating

the module.

All dates are in ISO 8601 format, i.e. YYYY-MM-DD.

 HE910/UE910 AT Commands Reference Guide 80378ST10091a

 HE910 Hardware User Guide 1vv03700925

 Event Monitor Application Note 80000nt10043a

 Digital Voice Interface Application Note 80000NT10004a

 LE910 AT Commands Reference Guide 80378ST10585a

 LE910 Hardware User Guide 1vv03701089

 LE910 Digital Voice Interface Application Note 80000NT11246a

 DE910 Hardware User Guide 1vv03700951

The aim of this document is the description of some hardware solutions useful for developing a

product that will host the Telit XE910 Mini PCIe Adapter.

In this document all the basic functions of a mobile phone will be taken into account; for each

one of them a proper hardware solution will be suggested and eventually the wrong solutions

and common errors to be avoided will be evidenced. Obviously this document cannot embrace

the whole hardware solutions and products that may be designed. The wrong solutions to be

avoided shall be considered as mandatory, while the suggested hardware configurations shall not

be considered mandatory, instead the information given shall be used as a guide and a starting

point for properly developing your product with the Telit Mini PCIe module.

NOTICE:

(EN) The integration of the GSM/GPRS/WCDMA XE910 Mini PCIe cellular module within user

application shall be done according to the design rules described in this manual.

(IT) L’integrazione del modulo cellulare GSM/GPRS/WCDMA XE910 Mini PCIe all’interno

dell’applicazione dell’utente dovrà rispettare le indicazioni progettuali descritte in questo manuale.

(DE) Die Integration des XE910 Mini PCIe GSM/GPRS/WCDMA Mobilfunk-Moduls in ein Gerät muß

gemäß der in diesem Dokument beschriebenen Kunstruktionsregeln erfolgen.

(SL) Integracija GSM/GPRS/WCDMA XE910 Mini PCIe modula v uporabniški aplikaciji bo morala

upoštevati projektna navodila, opisana v tem priročniku.

(SP) La utilización del modulo GSM/GPRS/WCDMA XE910 Mini PCIe debe ser conforme a los usos

para los cuales ha sido deseñado descritos en este manual del usuario.

(FR) L’intégration du module cellulaire GSM/GPRS/WCDMA XE910 Mini PCIe dans l’application de

l’utilisateur sera faite selon les règles de conception décrites dans ce manuel.

(HE)

The information presented in this document is believed to be accurate and reliable. However, no

responsibility is assumed by Telit Communications S.p.A. for its use, nor any infringement of patents or

other rights of third parties which may result from its use. No license is granted by implication or

otherwise under any patent rights of Telit Communications S.p.A. other than for circuitry embodied in

Telit products. This document is subject to change without notice.

XE910 Mini PCIe

This product has a standard Mini PCI express connector, excepting the (4) audio signals which

use normally reserved connectors.

Signal

I/O

Function

Type

Power Supply

2

3V3_AUX

O

3.3V supply

Power

24

3V3

O

3.3V supply

Power

39

3V3_AUX

O

3.3V supply

Power

41

3V3_AUX

O

3.3V supply

Power

52

3V3_AUX

O

3.3V supply

Power

4

GND

-

Ground

Power

9

GND

-

Ground

Power

15

GND

-

Ground

Power

18

GND

-

Ground

Power

21

GND

-

Ground

Power

26

GND

-

Ground

Power

27

GND

-

Ground

Power

29

GND

-

Ground

Power

34

GND

-

Ground

Power

35

GND

-

Ground

Power

37

GND

-

Ground

Power

40

GND

-

Ground

Power

43

GND

-

Ground

Power

50

GND

-

Ground

Power

SIM Card Interface

8

SIMVCC

O

External SIM signal – Power supply for the SIM

1.8 / 3V

10

SIMIO

I/O

External SIM signal - Data I/O

1.8 / 3V

12

SIMCLK

O

External SIM signal – Clock

1.8 / 3V

14

SIMRST

O

External SIM signal – Reset

1.8 / 3V

USB

36

USB D-

I/O

USB differential Data (-)

0.3…2.8V

38

USB D+

I/O

USB differential Data (+)

0.3…2.8V

Signal

I/O

Function

Type

Miscellaneous Functions

1

WAKE#

O

Active low signal used to wake up the system from stand-by

3.3V

20

WDISABLE#

I

Active low signal for wireless disabling (Flight mode)

3.3V

22

PERST#

I

Active low functional reset to the card

3.3V

42

LED_WWAN#

O

Active low, open drain signal for WWAN LED driving, used to provide

module’s status indication

3.3V…5V

Digital Voice Interface (DVI)

45

PCM_CLK

I/O

Digital Audio Interface (CLK)

CMOS 1.8V

47

PCM_RX

I

Digital Audio Interface (RX)

CMOS 1.8V

49

PCM_TX

O

Digital Audio Interface (TX)

CMOS 1.8V

51

PCM_SYNC

I/O

Digital Audio Interface (SYNC)

CMOS 1.8V

N.C.

3

-

5

-

6

-

7

-

11

-

13

-

16

-

17

-

19

-

23

-

25

-

28

-

30

-

31

-

32

-

33

-

44

-

46

-

48

-

The xE910 Mini PCIe adapter is equipped with a set of 50 Ω RF U.FL. connectors from Hirose

U.FL-R-SMT-1(10).

The available connectors are:

 Main RF antenna (ANT)

 RX Diversity Antenna (DIV)

 GNSS Antenna (GPS)

See the picture on the right for their position on the

interface.

The presence of all the connectors is depending on the

product characteristics and supported functionalities.

For more information about mating connectors, visit the website

http://www.hirose-connectors.com/

The power supply circuitry and board layout are a very important part in the full product design

and they strongly reflect on the product overall performances, hence read the requirements

carefully and the guidelines that will follow for a proper design.

The external power supply must be connected to the pins 2, 39, 41, 52 and must fulfill the

following requirements:

POWER SUPPLY

Nominal Supply Voltage

3.3 V

Normal Operating Voltage Range

3.00 V÷ 3.60 V

NOTE:

The Operating Voltage Range MUST never be exceeded; care must be taken when designing the

application’s power supply section to avoid having an excessive voltage drop.

If the voltage drop is exceeding the limits it could cause a Power Off of the module.

NOTE:

Overshoot voltage (regarding MAX Operating Voltage) and drop in voltage (regarding MIN

Operating Voltage) MUST never be exceeded;

Please refer to the Module’s Hardware User guide for the details

The GSM system is made in a way that the RF transmission is not continuous, else it is packed

into bursts at a base frequency of about 216 Hz, and the relative current peaks can be as high as

about 2.4A. Therefore the power supply has to be designed in order to withstand with these

current peaks without big voltage drops; this means that both the electrical design and the board

layout must be designed for this current flow. If the voltage drop during the peak current

absorption is too much, then the device may even shutdown as a consequence of the supply

voltage drop.

NOTE:

The electrical design for the Power supply should be made ensuring it will be capable of a peak

current output of at least 2.4 A.

The following table is listing the main differences between the xE910 variants:

Product

2G Bands

3G Bands

LTE Bands

CDMA Bands

GNSS

LE910-EUG

GSM 900,

DCS1800

B5(850), B8

(900), B1 (2100)

B20 (800), B3

(1800), B7 (2600)

NO

YES

LE910-NAG

GSM 850, PCS

1900

B5(850),

B2(1900)

B17(700), B5(850),

B4(1700), B2(1900)

NO

YES

LE910-NVG

Not supported

B5(850),

B2(1900)

B13(700), B4(1700)

NO

YES

LE910-SVG

Not supported

B13(700), B4(1700)

NO

YES

HE910

GSM 850, GSM

900, DCS1800,

PCS 1900

FDD B1, B2, B4,

B5, B8

Not supported

NO

YES

HE910-D

GSM 850, GSM

900, DCS1800,

PCS 1900

FDD B1, B2, B4,

B5, B8

Not supported

NO

DE910-

DUAL

Not supported

BC0, BC1

YES

Please refer to the Module’s Hardware User guide for the details

The antenna connection is one of the most important aspect in the full product design as it

strongly affects the product overall performances, hence read carefully and follow the

requirements and the guidelines for a proper design.

The xE910 Mini PCIe adapter is provided with three RF connectors.

The available connectors are:

 Main RF antenna (ANT)

 RX Diversity Antenna (DIV)

 GNSS Antenna (GPS)

Connecting cables between the module and the antenna must have 50 Ω impedance.

If the impedance of the module is mismatched, RF performance is reduced significantly.

If the host device is not designed to use the module’s diversity or GPS antenna, terminate the

interface with a 50Ω load.

MAIN ANTENNA REQUIREMENTS for LE910-EUG

Frequency range

Depending by frequency band(s) provided by the network operator, the

customer shall use the most suitable antenna for that/those band(s)

Bandwidth (GSM/EDGE)

GSM900 : 80 MHz

GSM1800(DCS) : 170 MHz

Bandwidth

(WCDMA)

WCDMA band I(2100) : 250 MHz

WCDMA band V(850) : 70 MHz

WCDMA band VIII(900) : 80 MHz

Bandwidth

(LTE)

LTE band III(1800) : 170 MHz

LTE Band VII(2600) : 190 MHz

LTE Band XX(800) : 71 MHz

Impedance

50 ohm

Input power

> 33dBm(2 W) peak power in GSM

> 24dBm Average power in WCDMA & LTE

VSWR absolute max

≤ 10:1 (limit to avoid permanent damage)

VSWR recommended

≤ 2:1 (limit to fulfil all regulatory requirements)

MAIN ANTENNA REQUIREMENTS for LE910-NAG

Frequency range

Depending by frequency band(s) provided by the network operator, the

customer shall use the most suitable antenna for that/those band(s)

Bandwidth (GSM/EDGE)

GSM850 : 70 MHz

GSM1900(PCS) : 140 MHz

Bandwidth

(WCDMA)

WCDMA band II(1900) : 140 MHz

WCDMA band V(850) : 70 MHz

Bandwidth

(LTE)

LTE Band II(1900) : 140 MHz

LTE Band IV(1700) : 445 MHz

LTE Band V (850) : 70 MHz

LTE Band XVII(700) : 42 MHz

Impedance

50 ohm

Input power

> 33dBm(2 W) peak power in GSM

> 24dBm Average power in WCDMA & LTE

VSWR absolute max

≤ 10:1 (limit to avoid permanent damage)

VSWR recommended

≤ 2:1 (limit to fulfil all regulatory requirements)

MAIN ANTENNA REQUIREMENTS for LE910-NVG

Frequency range

Depending by frequency band(s) provided by the network operator, the

customer shall use the most suitable antenna for that/those band(s)

Bandwidth

(WCDMA)

WCDMA band II(1900) : 140 MHz

WCDMA band V(850) : 70 MHz

Bandwidth

(LTE)

LTE Band IV(1700) : 445 MHz

LTE Band XIII(700) : 41 MHz

Impedance

50 ohm

Input power

> 24dBm Average power in WCDMA & LTE

VSWR absolute max

≤ 10:1 (limit to avoid permanent damage)

VSWR recommended

≤ 2:1 (limit to fulfil all regulatory requirements)

MAIN ANTENNA REQUIREMENTS for LE910-SVG

Frequency range

Depending by frequency band(s) provided by the network operator, the

customer shall use the most suitable antenna for that/those band(s)

Bandwidth

(LTE)

LTE Band IV(1700) : 445 MHz

LTE Band XIII(700) : 41 MHz

Impedance

50 ohm

Input power

> 24dBm Average power

VSWR absolute max

≤ 10:1 (limit to avoid permanent damage)

VSWR recommended

≤ 2:1 (limit to fulfil all regulatory requirements)

MAIN ANTENNA REQUIREMENTS for HE910

Frequency range

Depending by frequency band(s) provided by the network operator, the

customer shall use the most suitable antenna for that/those band(s)

Bandwidth (GSM/EDGE)

70 MHz in GSM850, 80 MHz in GSM900, 170 MHz in DCS & 140 MHz

PCS band

Bandwidth

(WCDMA)

70 MHz in WCDMA Band V

80 MHz in WCDMA Band VIII

460 MHz in WCDMA Band IV

140 MHz in WCDMA Band II

250 MHz in WCDMA Band I

Impedance

50 ohm

Input power

> 33dBm(2 W) peak power in GSM

> 24dBm Average power in WCDMA

VSWR absolute max

≤ 10:1 (limit to avoid permanent damage)

VSWR recommended

≤ 2:1 (limit to fulfil all regulatory requirements)

MAIN ANTENNA REQUIREMENTS for DE910-DUAL

Frequency range

Depending by frequency band(s) provided by the network operator, the

customer shall use the most suitable antenna for that/those band(s)

Bandwidth

70 MHz in CDMA BC0

140 MHz in CDMA BC1

Gain

Gain < 5.12dBi in CDMA BC0

Gain < 6.12dBi in CDMA BC1

Impedance

50 ohm

Input power

> 24.4dBm Average Power in CDMA

VSWR absolute max

≤ 5:1 (Limit to avoid permanent damage)

VSWR recommended

≤ 2:1 (limit to fulfil all regulatory requirements)

Please refer to the Module’s Hardware User guide for the details

 Install the antenna in a place covered by the GSM/WCDMA/LTE/CDMA signal.

 If the device antenna is located greater then 20cm from the human body and there are no co-

located transmitters then the Telit FCC/IC approvals can be re-used by the end product

 If the device antenna is located less than 20cm from the human body or there are no co-

located transmitters then the additional FCC/IC testing may be required for the end product

(Telit FCC/IC approvals cannot be reused)

 Antenna shall not be installed inside metal cases

 Antenna shall be installed also according antenna manufacturer instructions.

This product includes an input for a second RX antenna to improve the radio sensitivity.

The function is called Antenna Diversity.

DIVERSITY ANTENNA REQUIREMENTS for LE910-EUG

Frequency range

Depending by frequency band(s) provided by the network operator, the

customer shall use the most suitable antenna for that/those band(s)

Bandwidth

(WCDMA)

WCDMA band I(2100) : 250 MHz

WCDMA band V(850) : 70 MHz

WCDMA band VIII(900) : 80 MHz

Bandwidth

(LTE)

LTE band III(1800) : 170 MHz

LTE Band VII(2600) : 190 MHz

LTE Band XX(800) : 71 MHz

Impedance

50 ohm

VSWR recommended

≤ 2:1 (limit to fulfil all regulatory requirements)

DIVERSITY ANTENNA REQUIREMENTS for LE910-NAG

Frequency range

Depending by frequency band(s) provided by the network operator, the

customer shall use the most suitable antenna for that/those band(s)

Bandwidth

(WCDMA)

WCDMA band II(1900) : 140 MHz

WCDMA band V(850) : 70 MHz

Bandwidth

(LTE)

LTE Band II(1900) : 140 MHz

LTE Band IV(1700) : 445 MHz

LTE Band V (850) : 70 MHz

LTE Band XVII(700) : 42 MHz

Impedance

50 ohm

VSWR recommended

≤ 2:1 (limit to fulfil all regulatory requirements)

DIVERSITY ANTENNA REQUIREMENTS for LE910-NVG

Frequency range

Depending by frequency band(s) provided by the network operator, the

customer shall use the most suitable antenna for that/those band(s)

Bandwidth

(WCDMA)

WCDMA band II(1900) : 140 MHz

WCDMA band V(850) : 70 MHz

Bandwidth

(LTE)

LTE Band IV(1700) : 445 MHz

LTE Band XIII(700) : 41 MHz

Impedance

50 ohm

VSWR recommended

≤ 2:1 (limit to fulfil all regulatory requirements)

DIVERSITY ANTENNA REQUIREMENTS for LE910-SVG

Frequency range

Depending by frequency band(s) provided by the network operator, the

customer shall use the most suitable antenna for that/those band(s)

Bandwidth

(LTE)

LTE Band IV(1700) : 445 MHz

LTE Band XIII(700) : 41 MHz

Impedance

50 ohm

VSWR recommended

≤ 2:1 (limit to fulfil all regulatory requirements)

DIVERSITY ANTENNA REQUIREMENTS for HE910

Frequency range

Depending by frequency band(s) provided by the network operator, the

customer shall use the most suitable antenna for that/those band(s)

Bandwidth (GSM/EDGE)

70 MHz in GSM850, 80 MHz in GSM900 & 140 MHz PCS band

Bandwidth

(WCDMA)

70 MHz in WCDMA Band V

80 MHz in WCDMA Band VIII

140 MHz in WCDMA Band II

250 MHz in WCDMA Band I

Impedance

50 ohm

VSWR recommended

≤ 2:1 (limit to fulfil all regulatory requirements)

DIVERSITY ANTENNA REQUIREMENTS for DE910-DUAL

Frequency range

Depending by frequency band(s) provided by the network operator, the

customer shall use the most suitable antenna for that/those band(s)

Bandwidth

70 MHz in CDMA BC0

140 MHz in CDMA BC1

Impedance

50 ohm

VSWR recommended

≤ 2:1 (limit to fulfil all regulatory requirements)

The second Rx antenna should not be located in the close vicinity of main antenna. In order to

improve Diversity Gain, Isolation and reduce mutual interaction, the two antennas should be

located at the maximum reciprocal distance possible, taking into consideration the available

space in the application.

NOTE1:

On HE910 the diversity is not supported on the FDD BAND IV and DCS band.

NOTE2:

In case of HE910, if the RX Diversity is not used/connected, disable the Diversity functionality

using the AT#RXDIV command (ref to the At User guide for the proper syntax).

La page est en cours de chargement...

Telit Wireless Solutions xE910 Manuel utilisateur

Ce manuel convient également à

Telit Wireless Solutions xE910 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents