LG FN4 Le manuel du propriétaire

Marque: LG

Modèle: FN4

Catégorie: Casques mobiles

Taper: Le manuel du propriétaire

English

Français

Rev 2.0 CA

LG Electronics Inc., 2014

Note: Please read all information carefully prior to

using HBS-800 in order to prevent damages to the

product and to enjoy the best performance.

Any modications or changes to this manual

due to typographical errors or inaccuracies of

stated information shall only be made by LG

Electronics Inc.

HBS-800 User Manual

BLUETOOTH

Stereo Headset

ENG

Introduction 3

- Included in the package 3

Description of Parts 3

How to Use 4

- Power On / Power Off 4

- Charging 4

- Low Battery 4

- Battery Status Alert 4

- Pairing 5

- ANC - Ambient Noise Cancelling 6

- Multi-connection 7

- Auto Reconnect 8

- Calling 8

• Answering a Call 8

• Transferring a Call 8

• Voice Dialing 8

• Last Number Redial 8

• Ending a Call 9

• Call Waiting 9

• Rejecting a Call 9

• Mic Mute 9

- Volume Control 9

- Audio Streaming Controls 9

- Equalizer 10

- aptX

- SMS Reader 10

Summary of Button Functions 11

LED Indicator 12

Troubleshooting 12

Specifications 13

Precautions 13

Declaration of Confirmation 14

Additional Information 14

Limited Warranty 17

Important Safety Information 17

Table of Contents

ENG

Included in the Package

Headset

The LG TONE ULTRA

(HBS-800) is a lightweight wireless headset that uses

Bluetooth technology.

This product can be used as an audio accessory for devices supporting either the

A2DP or Hands-Free Bluetooth

Prole.

Ear Gels

(2 Sets)

*Charger

User Manual

Introduction

Description of Parts

HBS-800

VOLUME UP Button

REWIND Button

ANC Switch

FAST FORWARD Button

PLAY / PAUSE / STOP Button

Earbud (R)

Charging Port

LED Indicator

Power Switch

VOLUME DOWN Button

CALL Button

Microphone

Earbud (L)

Memory Flex Neck Strap

* Actual product design may differ from images shown on manual.

ENG

Charging

- When the charger is connected (with the power on or off) the headset will turn

off.

- While charging, the LED indicator will show a solid red light.

- When charging is complete, the LED indicator will turn off.

- When ANC is ON, the LED remains lit in violet and charging is not completed.

Please turn off the ANC.

Note: When Charging with other than the designated voltage range, the product

may be damaged and/or could cause charging failure.

Low Battery

- A low battery alert will play once every 2 minutes.

- If the battery is not charged, the headset will turn off.

Power On / Power Off

- Slide the power switch to the ON or OFF position.

How to Use

Battery Status Alert

- Press and hold the VOLUME DOWN button for 1 second to check the battery

status of the HBS-800. The audible battery status alert will inform you of the

battery level. There are 3 levels of battery power:

1. Battery High

2. Battery Medium

3. Battery Low

- The HBS-800 battery status indicator will appear on the iPhone screen.

ENG

Pairing

- Before using the headset for the rst time, you must pair it with a Bluetooth-enabled

device.

- There are 2 pairing mode methods with the HBS-800.

1) Easy Pairing

a) Slide the power switch to the ON position.

b) If it is your rst time pairing the device it will automatically enter pairing mode.

If it has been paired but no paired device is in range it will enter pairing mode

after 10 seconds.

• The LED indicator will be solid blue.

c) On the device you wish to pair, nd the Bluetooth menu and search for new

devices.

d) Select LG HBS800 from the list of devices.

e) If asked for a Password/Pin Code enter 0000 (4 Zeros).

f) Once the devices are paired, you will hear “Your headset paired”.

• The HBS-800 will automatically turn off if not paired within 3 minutes.

2) Manual Pairing (pairing with another phone or re-pairing)

a) With the power off, press the CALL button and slide the power switch to the ON

position. Hold the CALL button for about 2 seconds.

b) When the headset enters Pairing Mode, the LED indicator will show a solid blue

light. After the procedure repeat Easy Pairing steps c though f.

How to Use

ENG

How to Use

ANC - Ambient Noise Cancelling

Ambient Noise Cancelling is new technology that reduces ambient noise in a

noisy environment. It provides a better listening experience to you.

1) Performance

Ambient Noise Cancelling actively reduces more background noise than any other

noise cancellation technology.

2) Activating / Deactivating

a) Slide the ANC switch to the ON position.

b) The LED indicator will show a solid violet light and you will hear “ ANC On”.

c) Slide the ANC switch to the OFF position to deactivate the Ambient Noise

Cancelling feature. You will hear “ANC off”.

d) The Ambient Noise Cancelling feature is also available when the HBS-800

is set to OFF. The solid violet light will be displayed but the voice prompt will

not be played to indicate on and off.

Status

ANC On ANC Off

LED Indicator Voice Prompt LED Indicator Voice Prompt

Power on

Violet “ANC On” Blue “ANC Off”

Power off Violet X X

3) Precautions when using Ambient Noise Cancelling

a) The Ambient Noise Cancelling feature optimizes noisy environments, such

as buses, trains, and airplanes. There is no need to use this feature in a

quiet environment.

b) Be extra cautious while walking, bicycling, or driving. You may not hear

warning signals or alarms.

c) The ANC performance might vary depending on how the headset is placed

into the ear.

ENG

Multi-connection

Advanced Multipoint

The HBS-800 is capable of having two devices connected to the headset at the

same time. This will give you the freedom of using call waiting between calls on

both of your connected phones.

Connection

1. Pair the headset with one of your Bluetooth-enabled phones (see the pairing

instructions on page 4).

2. Turn the headset off and use the Manual Pairing method as described on page

5 to enter Pairing Mode.

3. Pair and connect the headset with your other Bluetooth-enabled phone. (this

will be your primary phone).

4. Once this phone is paired and connected, go back and connect the originally

paired phone to the headset. This will now be your secondary phone.

Note: When the HBS-800 is connected to two phones at the same time

(Multipoint), the headset calling functions will work with the primary phone.

Note: In case of failure to connect to the primary phone through Easy Pairing, the

HBS-800 will enter pairing mode.

Calling Function

- Voice Dialing and Last Number Redial features work with the primary phone (or

phone which made the last outgoing call).

Call Waiting

- While speaking on an active call, press and hold the CALL button for 1 second to

switch to an incoming call.

- To switch between 2 active calls, press and hold the CALL button for 1 second.

- To end both calls briey press the CALL button.

- If both phones are receiving an incoming call, the headset will default to the

primary device.

How to Use

ENG

How to Use

Calling

Answering a Call

- When there is an incoming call, the headset will ring and vibrate.

- Briey press the VOLUME DOWN button to stop vibration.

- Briey press the CALL button to answer the incoming call.

Transferring a Call

- If you make a call from the phone, the call will (depending on the phone settings)

automatically transfer to the headset. If the call is not automatically transferred, you can

manually transfer the call to or from the headset by pressing and holding VOLUME UP

button for 3 seconds on the HBS-800 (phone and headset must be paired).

Voice Dialing

- Briey press the CALL button to activate Voice Command. For best results, record

the voice dialing tag through your headset.

Note: If your phone does not support voice dialing, this action may activate Last

Number Redial.

Last Number Redial

- Press and hold the CALL button for 1 second to activate Last Number Redial.

The headset will beep and then call the last number dialed.

Auto Reconnect

- If the HBS-800 is turned off (either accidentally or intentionally) while connected

to a phone, the headset and phone will disconnect. The headset and phone will

automatically reconnect when the HBS-800 is turned back on while in range.

- The secondary phone will need to be connected manually. Select LG HBS800

from the list of devices in the Bluetooth menu and pair.

Out of Range

- If the paired devices are separated by a range of 30 feet (10 meters) or more,

the headset and phone will disconnect and the HBS-800 will vibrate to alert you.

- If the headset and phone do not automatically reconnect when they are back within

the required range, briey press the CALL button on the HBS-800 to reconnect

manually.

- While in multi-connection and streaming, the inactive paired device, which is out

of range, will be disconnected. The HBS-800 will alert you once with no attempt to

reconnect.

ENG

Volume Control

- Press the VOLUME UP or VOLUME DOWN button to adjust the speaker volume.

- There are 8 levels of speaker volume in Hands-Free mode.

- There are 8 levels of speaker volume in Audio Streaming mode.

Audio Streaming Controls

Play

- Briey press the PLAY/PAUSE/STOP Button.

Pause

- While playing music, briey press the PLAY/PAUSE/STOP button.

Stop

- While playing music, press and hold the PLAY/PAUSE/STOP button for 1

second.

Next song

- Briey press the FAST FORWARD button.

Previous song

- Briey press the REWIND button.

Ending a Call

- Briey press the CALL button.

Call Waiting

- Answer a second call without hanging up the rst call by pressing and holding the

CALL button for 1 second. Press and hold the CALL button for 1 second to return

to the original call.

- Briey press the CALL button to terminate both calls at once.

Rejecting a Call

- Activate call reject by pressing and holding the CALL button for 1 second when

the phone rings.

* These functions may only be used if your phone supports them. For further

information about using these features, please consult your phone’s user manual.

Mic Mute

- Press and hold the VOLUME UP and VOLUME DOWN buttons at the same time

for 1 second to mute/unmute the mic during conversation.

How to Use

ENG

SMS Reader

The HBS-800 Bluetooth headset supports SMS reading on Android

based devices.

In Google Play™ search for the LG BT Reader Plus application and install it on your

device to use this function.

* The QR code shown here helps you download the LG BT Reader Plus application

from Google Play. Google Play is a trademark of Google, Inc.

How to Use

aptX

- The HBS-800 features aptX

technology that ensures audio content transmitted

over Bluetooth is instant and crystal-clear.

- aptX

is automatically enabled as long as the source device supports it.

Fast Forward

- Press and hold the FAST FORWARD button.

Rewind

- Press and hold the REWIND button.

Equalizer

- While playing music, press and hold the VOLUME UP and VOLUME DOWN

buttons at the same time for 1 second to switch between Bass Boost (default),

Normal, and Treble Boost.

- The bass coming from the speakers can vary as a result of the size of the earbud

that is being used.

ENG

Function

HBS-800 Status

Action

Power on Power off Slide the power switch to the ON position.

Power off Power on Slide the power switch to the OFF position.

ANC on

ANC off

Power on/off

Slide the ANC switch to the ON position.

Slide the ANC Switch to the OFF position.

Volume up Talking/Playing music Briey press the VOLUME UP button.

Volume down Talking/Playing music Briey press the VOLUME DOWN button.

Transferring a call Talking Press and hold VOLUME UP button for 3 seconds.

Answering a call Ringing Briey press the CALL button.

Stop incoming call

vibration alerting

Ringing Briey press the VOLUME DOWN button.

Ending a call Talking Briey press the CALL button.

Call waiting Talking Press and hold CALL button for 1 second.

Last number redial Idle Press and hold CALL button for 1 second.

Voice dialing

(phone must support)

Idle Briey press the CALL button.

Call reject Ringing Press and hold the CALL button for 1 second.

Mic mute on/off Talking

Press and hold the VOLUME UP and VOLUME DOWN

buttons at the same time for 1 second.

Pairing mode (Manual) Power off

Press the CALL button and slide the power switch to the

ON position. Hold the CALL button for about 2 seconds.

Battery status check Idle

Press and hold the VOLUME DOWN button for

1 second.

Play Power on Briey press the PLAY/PAUSE/STOP button.

Pause Playing music Briey press the PLAY/PAUSE/STOP button.

Stop Playing music

Press and hold the PLAY/PAUSE/STOP button for

1 second.

Next song Playing music Briey press the FAST FORWARD button.

Previous song Playing music Briey press the REWIND button.

Fast forward Playing music Press and hold the FAST FORWARD button.

Rewind Playing music Press and hold the REWIND button.

Equalizer settings Playing music

Press and hold the VOLUME UP and VOLUME DOWN

buttons at the same time for 1 second.

Summary of Button Functions

Function HBS-800 Status Action

Operating

Power on The blue LED light ickers 5 times.

Power off

The blue LED light ickers 5 times and then

turns off.

ANC on

The solid violet LED light stays on.

Pairing mode The solid blue LED light stays on.

Headset / hands-free

prole connected

The blue LED light ickers 2 times every 5

seconds.

Call connected

The blue LED light ickers 2 times every 5

seconds.

Charging

Charging The red LED light stays on.

Charging complete

LED turnes off. If ANC is turned on, the solid violet

lighting stays on.

Issue Possible problem Resolution

Does not turn on

Check whether the battery of the

HBS-800 is fully charged.

Charge the battery.

Unable to communicate

with the LG Bluetooth

Headset HBS-800

Check whether the phone

supports the headset or hands-

free Bluetooth proles.

Determine whether your phone supports the

headset or hands-free Bluetooth proles.

Check whether the battery of the

HBS-800 is low.

Charge the battery.

Unable to pair the HBS-

800 with the Bluetooth

device

Check and make sure the

headset is on.

Slide the power switch to the ‘ON’ position to

turn on the headset.

Check and make sure the

headset is placed in pairing mode.

With the power off, press the CALL button and

slide the power switch to the ‘ON’ position.

Hold the CALL button for about 2 seconds to

manually place the headset in pairing mode.

Low sound (speaker) Check the speaker volume. lncrease the volume level.

ENG

LED Indicator

Troubleshooting

ENG

Item Description

Bluetooth

specication

3.0 (Headset / Hands-Free / A2DP Proles)

Battery

Battery 3.7 V / 195 mAh Li-Polymer

Talk Time Up to 10 hours

Music play time Up to 10 hours

Standby time Up to 500 hours

ANC time(with power off or Standby) Up to 18 hours

ANC time(with playing or talking) Up to 6 hours

Charging time Less than 2 hours

Charging voltage range DC 4.75 V ~ 5.6 V, 400mA

Operation temperature 14°F ~ 140°F (-10°C ~ 60°C)

Dimension / weight 135.6mm(W) X 160mm(L) X 14mm(T) / 33.7g

Do not drop the device.

Do not modify, repair, or disassemble.

Do not expose directly to water, alcohol, benzene, etc., for cleaning.

Do not expose directly to ammables.

Do not place or keep the device near ammables.

Keep the device away from excessive humidity and dust.

Do not place heavy objects on the device.

Only charge the headset with an original LG charger, otherwise it may be damaged.

• Changes or modications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

• There is a risk of explosion if the battery is replaced by an incorrect type.

• Dispose of used batteries according to the instructions.

• The neck strap is made of a shape memory alloy. However, bending the neck

strap repeatedly is not recommended.

Specications

Precautions

1. Radio frequency exposure

This Bluetooth

Stereo Headset HBS-800 is a radio transmitter and receiver.

When in operation it communicates with a Bluetooth

equipped mobile device

by receiving and transmitting radio frequency (RF) electromagnetic elds

(microwaves) in the frequency range 2.4 to 2.4835 GHz. Your Bluetooth

Headset is designed to operate in compliance with the RF exposure guidelines

and limits set by national authorities and international health agencies when used

with any compatible LG Electronics mobile phone.

FCC NOTICE TO USERS:

This device complies with part 15 of the FCC rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference and

(2) This device must accept any interference received, including interference that

may cause undesired operation.

IMPORTANT NOTE:

To comply with the FCC RF exposure compliance requirements, no change to

the antenna or the device is permitted. Any change to the antenna or the device

could result in the device exceeding the RF exposure requirements and void

user’s authority to operate the device.

CE NOTICE TO USERS:

Hereby, LG Electronics Inc. declares that this HBS-800 is in compliance with the

essential requirements and other relevant provisions of Directive 1999/5/EC.

IC NOTICE TO USER:

This device complies with Industry Canada license-exempt RSS standard(s).

Operation is subject to the following two conditions: (1) this device may not

cause interference, and (2) this device must accept any interference, including

interference that may cause undesired operation of the device.

FCC ID : BEJHBS800 IC : 2703C-HBS800

1177

ENG

Declaration of Conrmation

Additional Information

ENG

2. Potentially explosive atmosphere

Turn off your electronic device when in any area with a potentially explosive

atmosphere. Although this is uncommon, your electronic device could generate

sparks. Sparks in such areas could cause an explosion or re resulting in bodily

injury or even death. Areas with a potentially explosive atmosphere are often, but

not always, clearly marked.

3. Emergency calls

IMPORTANT!

This Bluetooth

headset and the electronic device connected to the headset

operate using radio signals, mobile and landline networks as well as

user - programmed functions, which cannot guarantee connection under all

conditions. Therefore you should never rely solely upon any electronic device

for essential communications (e.g. medical emergencies). Remember, in order

to make or receive calls, the headset and the electronic device connected to the

headset must be switched on and in a service area with adequate mobile signal

strength. Emergency calls may not be possible on all mobile phone networks or

when certain network services and/or phone features are in use. Check with your

local service provider.

4. Battery information

A rechargeable battery has a long service life if treated properly. A new battery

or one that has not been used for a long period of time could have reduced

capacity the rst few times it is used. Do not expose the battery to extreme

temperatures, never above +60°C (+140°F) or below -20°C (-4°F). For maximum

battery capacity, use the battery at room temperature. If the battery is used in

low temperatures, the battery capacity will be reduced. The battery can only be

charged in temperatures between +10°C (+50°F) and +45°C (+113°F). For your

safety, do not remove the battery incorporated with the product. If you need to

replace the battery, take it to the nearest authorised LG Electronics service point

or dealer for assistance.

5. Recycling the battery in your Bluetooth

headset

The battery in your Bluetooth

Headset must be disposed of properly and should

never be placed in municipal waste. The LG Electronics service partner who

removes the battery will dispose of it according to local regulations.

Additional Information

6. Conditions

- The warranty is valid only if the original receipt issued to the original

purchaser by the dealer, specifying the date of purchase and serial number,

is presented with the product to be repaired or replaced. LG Electronics

reserves the right to refuse warranty service if this information has been

removed or changed after the original purchase of the product from the dealer.

- If LG Electronics repairs or replaces the product, the repaired or replaced

product shall be warranted for the remaining time of the original warranty

period or for ninety (90) days from the date of repair, whichever is longer.

Repair or replacement may involve the use of functionally equivalent

reconditioned units. Replaced parts or components will become the property

of LG Electronics.

- This Warranty does not cover any failure of the product due to normal wear

and tear, or due to misuse, including but not limited to use in other than the

normal and customary manner, in accordance with instructions for use and

maintenance of the product. Nor does this warranty cover any failure of the

product due to accident, modication or adjustment, acts of God or damage

resulting from liquid.

- This warranty does not cover product failures due to improper repair

installations, modications or service performed by a non- LG Electronics

authorized person. Tampering with any of the seals on the product will void

the warranty.

- THERE ARE NO EXPRESS WARRANTIES, WHETHER WRITTEN OR

ORAL, OTHER THAN THIS PRINTED INCLUDING WITHOUT LIMITATION

THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR

A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS

LIMITED WARRANTY. IN NO EVENT SHALL LG ELECTRONICS OR ITS

VENDORS BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES

OF ANY NATURE WHATSOEVER, INCLUDING BUT NOT LIMITED TO

LOST PROFITS OR COMMERCIAL LOSS, TO THE FULL EXTENT THOSE

DAMAGES CAN BE DISCLAIMED BY LAW.

• Some countries/states do not allow the exclusion or limitation of incidental or

consequential damages, or limitation of the duration of implied warranties, so

the preceding limitations or exclusions may not apply to you. The warranty

provided does not affect the consumer’s statutory rights under applicable

national legislation in force, nor the consumer’s rights against the dealer

arising from their sales/purchase contract.

Additional Information

ENG

Subject to the conditions of this Limited Warranty, LG Electronics warrants this

product to be free from defects in design, material and workmanship at the time

of its original purchase by a consumer, and for a subsequent period of one (1)

year. Should your product need warranty service, please return it to the dealer

from whom it was purchased or contact your local LG Electronics contact center

to get further information.

Avoiding hearing damage

Permanent hearing loss may occur if you use your headset at a high volume.

Set the volume to a safe level. Over time you can become accustomed to a

higher volume that may sound normal but can be damaging to your hearing.

If you experience ringing in your ears or mufed speech, stop listening and have

your hearing checked. The louder the volume, the less time is required before

your hearing could be affected.

Hearing experts suggest that to protect your hearing:

• Limit the amount of time you use the headset at high volume.

• Avoid turning up the volume to block out noisy surroundings.

• Turn the volume down if you can’t hear people speaking near you.

Using headsets safely

Use of headsets to listen to music while operating a vehicle is not recommended

and is illegal in some areas. Be careful and attentive while driving. Stop using

this device if you nd it disruptive or distracting while operating any type of

vehicle or performing any other activity that requires your full attention.

ENG

Limited Warranty

Important Safety Information

MEMO

English

Français

Rév. 2.0 CA

LG Electronics Inc., 2014

Remarque : An de proter de performances

optimales du casque HBS-800 et d’éviter de

l’endommager, lisez attentivement toute cette

documentation avant de l’utiliser.

Toute modication apportée à ce manuel pour

corriger une erreur typographique ou une

inexactitude technique ne peut être effectuée que

par LG Electronics Inc.

HBS-800 Manuel d’utilisation

Casque stéréo Bluetooth

FRA

Introduction 3

- Contenu de l’emballage 3

Description des pièces 3

Utilisation 4

- Mise sous tension/hors tension 4

- Charge 4

- Batterie faible 4

- Alerte d'état de la batterie 4

- Couplage 5

- ANC - Annulation du bruit ambiant 6

- Connexions multiples 7

- Reconnexion automatique 8

- Appel 8

• Répondre à un appel 8

• Transfert d’un appel 8

• Composition vocale 8

• Recomposition du dernier numéro 9

• Conclusion d'un appel 9

• Appel en attente 9

• Rejet d'un appel 9

• Mise en sourdine du micro 9

- Réglage du volume 9

- Commandes de diffusion audio 9

- Égaliseur 10

- aptX

- Lecture de SMS 10

Récapitulatif des fonctions des boutons 11

Voyant DEL 12

Dépannage 12

Spécifications 13

Précautions 13

Attestation de conformité 14

Informations supplémentaires 14

Garantie limitée 17

Consignes de sécurité importantes 17

Table des matières

La page charge ...

LG FN4 Le manuel du propriétaire

Marque: LG

Modèle: FN4

Catégorie: Casques mobiles

Taper: Le manuel du propriétaire

Télécharger le PDF

rapport

dans d''autres langues

English: LG FN4 Owner's manual

LG FN4 Le manuel du propriétaire

LG FN4 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents