Mettler Toledo IND246 Terminal Guide d'installation

Installation Manual

IND246 and IND246 POWERCELL

Weighing Terminal

Service

IND246

and

IND246

POWERCELL Weighing Terminal

METTLER TOLEDO Service

Essential Services for Dependable Performance of Your IND246 and IND246 POWERCELL

Weighing Terminal

Congratulations on choosing the quality and precision of METTLER TOLEDO. Proper use of your

new equipment according to this Manual and regular calibration and maintenance by our factory-

trained service team ensures dependable and accurate operation, protecting your investment.

Contact us about a service agreement tailored to your needs and budget. Further information is

available at www.mt.com/service.

There are several important ways to ensure you maximize the performance of your investment:

1.

Register your product: We invite you to register your product at

www.mt.com/productregistration so we can contact you about enhancements, updates and

important notifications concerning your product.

2.

Contact METTLER TOLEDO for service: The value of a measurement is proportional to its

accuracy – an out of specification scale can diminish quality, reduce profits and increase

liability. Timely service from METTLER TOLEDO will ensure accuracy and optimize uptime and

equipment life.

a.

Installation, Configuration, Integration and Training: Our service representatives are factory-

trained, weighing equipment experts. We make certain that your weighing equipment is

ready for production in a cost effective and timely fashion and that personnel are trained for

success.

b.

Initial Calibration Documentation: The installation environment and application

requirements are unique for every industrial scale so performance must be tested and

certified. Our calibration services and certificates document accuracy to ensure production

quality and provide a quality system record of performance.

c.

Periodic Calibration Maintenance: A Calibration Service Agreement provides on-going

confidence in your weighing process and documentation of compliance with requirements.

We offer a variety of service plans that are scheduled to meet your needs and designed to

fit your budget.

d.

GWP® Verification: A risk-based approach for managing weighing equipment allows for

control and improvement of the entire measuring process, which ensures reproducible

product quality and minimizes process costs. GWP (Good Weighing Practice), the science-

based standard for efficient life-cycle management of weighing equipment, gives clear

answers about how to specify, calibrate and ensure accuracy of weighing equipment,

independent of make or brand.

No part of this manual may be reproduced or transmitted in any form or by any

means, electronic or mechanical, including photocopying and recording, for any

purpose without the express written permission of METTLER TOLEDO.

U.S. Government Restricted Rights: This documentation is furnished with

Restricted Rights.

information of METTLER TOLEDO. It may not be copied in whole or in part

without the express written consent of METTLER TOLEDO.

METTLER TOLEDO reserves the right to make refinements or changes to the

product or manual without notice.

COPYRIGHT

METTLER TOLEDO

®

is a registered trademark of Mettler-Toledo, LLC. All other

brand or product names are trademarks or registered trademarks of their

respective companies.

METTLER TOLEDO RESERVES THE RIGHT TO MAKE REFINEMENTS OR

CHANGES WITHOUT NOTICE.

FCC Notice

This device complies with Part 15 of the FCC Rules and the Radio Interference

Requirements of the Canadian Department of Communications. Operation is

subject to the following conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment

is operated in a commercial environment. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and used in accordance

with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to

cause harmful interference in which case the user will be required to correct the

interference at his or her expense.

Declaration of Conformity is available at

http://glo.mt.com/global/en/home/search/compliance.html/compliance/.

RoHS Compliance Statement.

 The majority of our products fall within categories 8 and 9. Those categories

currently do not fall within the scope of the Directive 2002/95/EG (RoHS) of

January 27, 2003. If our products are intended for use in other products

which themselves fall within the scope of the RoHS Directive, compliance

requirements have to be separately negotiated contractually.

 Those products which fall within categories 1-7 and 10 will be in compliance

with the EU RoHS Directive from no later than July 1, 2006.

 If it is not possible for technical reasons to replace any non-RoHS-compliant

substances in any of the above products as required, we plan to inform our

customers in a timely manner

Statement regarding harmful substances

We do not make direct use of harmful materials such as asbestos, radioactive

substances or arsenic compounds. However, we purchase components from

third party suppliers, which may contain some of these substances in very small

quantities.

Disposal of Electrical and Electronic Equipment

In conformance with the European Directive 2002/96/EC on Waste Electrical and Electronic

Equipment (WEEE) this device may not be disposed of in domestic waste. This also applies

to countries outside the EU, per their specific requirements.

Please dispose of this product in accordance with local regulations at the collecting point

specified for electrical and electronic equipment.

If you have any questions, please contact the responsible authority or the distributor from

which you purchased this device.

Should this device be passed on to other parties (for private or professional use), the

content of this regulation must also be related.

Thank you for your contribution to environmental protection.

Warnings and Cautions

• READ this manual BEFORE operating or servicing this equipment and FOLLOW these

instructions carefully.

• SAVE this manual for future reference.

WARNING

FOR CONTINUED PROTECTION AGAINST SHOCK HAZARD CONNECT THE AC VERSION OF THE

IND246 TERMINAL TO PROPERLY GROUNDED OUTLET ONLY. DO NOT REMOVE THE GROUND

PRONG.

WARNING

DO NOT USE THE IND246 TERMINAL IN AREAS CLASSIFIED AS HAZARDOUS BECAUSE OF

COMBUSTIBLE OR EXPLOSIVE ATMOSPHERES. CONTACT AN AUTHORIZED METTLER TOLEDO

REPRESENTATIVE FOR INFORMATION ABOUT HAZARDOUS AREA APPLICATIONS.

WARNING

WHEN THIS EQUIPMENT IS INCLUDED AS A COMPONENT PART OF A SYSTEM, THE

RESULTING DESIGN MUST BE REVIEWED BY QUALIFIED PERSONNEL WHO ARE FAMILIAR

WITH THE CONSTRUCTION AND OPERATION OF ALL COMPONENTS IN THE SYSTEM AND THE

POTENTIAL HAZARDS INVOLVED. FAILURE TO OBSERVE THIS PRECAUTION COULD RESULT IN

BODILY HARM AND/OR PROPERTY DAMAGE.

CAUTION

THE BATTERY USED IN THIS DEVICE MAY PRESENT A RISK OF FIRE OR CHEMICAL BURN IF

MISTREATED. DO NOT CRUSH, DISASSEMBLE, HEAT ABOVE 60°C OR INCINERATE. REPLACE

BATTERY WITH 72253419 ONLY. USE OF ANOTHER BATTERY MAY PRESENT A RISK OF

BURN, FIRE OR EXPLOSION.

NOTICE

NiMH BATTERIES SLOWLY DISCHARGE WHEN NOT USED (FOR EXAMPLE WHEN STORED FOR FUTURE USE).

BATTERY OPERATED TERMINALS AND SPARE NiMH BATTERY PACKS IN STORAGE MUST BE FULLY CHARGED

EVERY THREE MONTHS TO PREVENT PERMANENT BATTERY DAMAGE.

NOTICE

DO NOT ATTEMPT TO CHARGE THE BATTERY IF THE BATTERY TEMPERATURE IS BELOW 0°C (32°F). CHARGING IS

NOT POSSIBLE AT OR BELOW THIS TEMPERATURE. DO NOT OPERATE THE BATTERY CHARGER OUTSIDE ITS

TEMPERATURE RANGE OF 0°C (32°F) TO 40°C (104°F).

NOTICE

DISPOSE OF USED BATTERY PROMPTLY. KEEP AWAY FROM CHILDREN. DO NOT DISASSEMBLE AND DO NOT

DISPOSE OF IN FIRE.

Warnings and Cautions

NOTICE

OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE DEVICES.

64084463 / Rev. 03 / 12/2017

METTLER TOLEDO IND246 and IND246 POWERCELL Weighing Terminal Installation Manual 1

Contents

1 Introduction ...................................................................... 1-1

1.1. IND246 Overview ............................................................... 1-1

1.1.1. Standard Features .................................................................................. 1-1

1.1.2. IND246 Terminal Versions ...................................................................... 1-2

1.2. Specifications .................................................................... 1-2

1.3. Battery Performance ........................................................... 1-5

1.4. Use in Hazardous Areas ...................................................... 1-6

1.5. Inspection and Contents Checklist ........................................ 1-6

1.6. Model Identification ............................................................ 1-7

1.7. Physical Dimensions .......................................................... 1-8

1.8. Main PCB .......................................................................... 1-9

1.8.1. SD Memory ........................................................................................... 1-9

1.9. Scale Bases ...................................................................... 1-9

1.9.1. Analog .................................................................................................. 1-9

1.9.2. POWERCELL .......................................................................................... 1-9

1.9.3. PowerDeck .......................................................................................... 1-10

1.10. Options ........................................................................... 1-10

1.10.1. COM2 Serial Port .................................................................................. 1-10

1.10.2. Discrete I/O .......................................................................................... 1-11

1.10.3. USB .................................................................................................... 1-11

1.10.4. Ethernet ............................................................................................... 1-11

1.11. Display and Keyboard ...................................................... 1-12

1.11.1. Display Layout ..................................................................................... 1-12

1.11.2. Front Panel Keys .................................................................................. 1-12

2 Installation ....................................................................... 2-1

2.1. Opening the Enclosure ........................................................ 2-1

2.2. Environmental Protection ..................................................... 2-2

2.3. Mounting the Terminal ........................................................ 2-2

2.3.1. Desktop Mounting .................................................................................. 2-2

2.3.2. Wall or Column Mounting with Brackets ................................................... 2-3

2.3.3. Attaching Brackets and Mounting Terminal ................................................ 2-9

2.4. Installing Cables and Connectors ....................................... 2-10

2.4.1. Ferrite Core .......................................................................................... 2-10

2.4.2. Cable Glands ....................................................................................... 2-11

2.4.3. Main Board Wiring Connections ............................................................. 2-13

2.4.4. PDX or GDD POWERCELL Cabling ......................................................... 2-18

2.4.5. PowerDeck Connection ......................................................................... 2-30

2.4.6. Wiring Connections for Options .............................................................. 2-31

2 METTLER TOLEDO IND246 and IND246 POWERCELL Weighing Terminal Installation Manual

64084463 / Rev. 03 / 12/2017

Contents

2.5. PCB Switch Settings .......................................................... 2-37

2.5.1. Main PCB Switches .............................................................................. 2-37

2.5.2. Discrete I/O Switch ............................................................................... 2-38

2.6. PCB Jumper Positions ...................................................... 2-39

2.7. SD Card Installation .......................................................... 2-39

2.8. Capacity Label Instructions ................................................ 2-39

2.9. Closing the Enclosure ....................................................... 2-40

2.10. Securing the Enclosure ...................................................... 2-40

64084463 | 03 | 12/2017

METTLER TOLEDO IND246 and IND246 POWERCELL Installation Manual

1-1

This chapter covers

• Overview

• Specifications

• Use in Hazardous Areas

• Safe Disposal Requirement

• Inspection and Contents

Checklist

• Model Identification

• Physical Dimensions

• Main PCB

• Scale Bases

• Options

• Display and Keyboard

1 Introduction

The IND246 and IND246 POWERCELL industrial scale terminals provide a

compact yet flexible solution to a variety of weighing needs. Available as either AC

powered for stationary applications or battery-powered for portable analog load cell

applications, this terminal is at home in virtually any industrial environment.

Innovative use of Secure Data (SD) Memory technology expands the memory

available for data storage when required.

Unless stated otherwise, IND246 refers to both the analog and POWERCELL

versions.

Both 2mv/V and 3mv/V analog load cells are supported without the need for

any configuration change. The POWERCELL model supports the advanced

capabilities of POWERCELL PDX and GDD load cells, featuring sophisticated self-

diagnostics. The PowerDeck model for POWERCELL supports a connector for quick

home run cable termination, faster calibration and automatic addressing. The

IND246 delivers precision measurement data from grams to tons in a single, cost

effective package.

Standard applications include basic weighing, animal weighing, check weighing, counting, peak

weight measurement and vehicle weighing. Whether communicating weight data to a PC or

providing a serial output of data to a printer, the IND246 terminal offers solutions for a wide range

of applications.

1.1. IND246 Overview

1.1.1. Standard Features

• Rugged stainless steel enclosure

• Supports one analog load cell platform with up to four (battery version), ten (AC version)

350Ω load cells; or one scale platform with up to 12 POWERCELL PDX load cells; or up to 3

PowerDeck scale platforms, each with 4 SLB615D load cells; or up to 12 SLC611D LCWM

load cells

• Large transflective graphic LCD display with backlight for vivid readability in all light

conditions

• One electrically isolated serial port (COM1) for asynchronous, bidirectional communication

• Powered by either 85–264 V AC or internal battery pack (selected by model)

• Support for the following option boards:

 Choice of one serial/DIO option:

1-2

METTLER TOLEDO IND246 and IND246 POWERCELL Installation Manual

64084463 | 03 | 12/2017

Introduction

o COM2 Serial Interface

o COM2 and Discrete I/O interface (analog version only)

o USB Serial Interface

o USB and Discrete I/O interface (analog version only)

 Optional network interface:

o Ethernet TCP/IP

• Front panel key access to basic weighing functions – zero, tare, clear, unit switching and

print

• Alpha numeric keypad for simple, quick entry of tare and identification information

• Selectable primary unit of measure including grams, kilograms, pounds, tons, metric tons

• Selectable second unit of measure including grams, kilograms, pounds, ounces, tons and

metric tons

• Backup and restore of configuration and calibration settings, using SD memory device or

InSite

®

SL PC tool (included)

• PC-based File Transfer Tool (included) exchanges application files and tables with the

IND246 terminal

• Automatic shutoff and backlight timeout features to help conserve energy on the battery

powered version

1.1.2. IND246 Terminal Versions

The terminal is available in the following four versions:

• IND246 Harsh enclosure, AC power

• IND246 Harsh enclosure, Battery power

• IND246 POWERCELL, AC power

• IND246 POWERCELL for SL_61xD, AC power

1.2. Specifications

The IND246 terminal conforms to the specifications listed in Table 1-1.

Table 1-1: Terminal Specifications

IND246 Specifications

Enclosure Type

Stainless steel, configurable as desk top or wall mount enclosure

Dimensions (w ×

h × d)

230 mm x 146 mm x 165 mm (9 in. x 5.75 in. x 6.5 in.)

Shipping Weight

AC Version: 3.4 kg (7.5 lb)

Battery Version: 3.9 kg (8.5 lb)

POWERCELL Version: 3.6 kg (7.9 lb)

64084463 | 03 | 12/2017

METTLER TOLEDO IND246 and IND246 POWERCELL Installation Manual

1-3

IND246 Specifications

Environmental

Protection

IP66 (comparable to Type 4x)

Operating

Environment

The terminal can be operated at temperatures ranging from −10° to 40° C (14° to

104° F) at 10% to 95% relative humidity, non-condensing.

Hazardous Areas

The IND246 terminal cannot be operated in areas classified as Hazardous because of

combustible or explosive atmospheres in those areas. Contact an authorized METTLER

TOLEDO representative for information about hazardous area applications.

Power

AC version: Operates at 85–264 VAC, 49–61 Hz and includes a power cord configured

for the country of use.

Battery version: Operates from internal NiMH battery pack

Power

Consumption

Refer to Table 1-2 for details of the AC version. Values shown are with internal COM2/DIO

option and Ethernet option installed and load cell input loaded with 8 x 350Ω load cells.

Refer to Table 1-3 for Refer to Table 1-4 for details of the battery life for the battery

powered version.

Power

Consumption

Refer to Table 1-2 for the AC version; Table 1-3 for IND246 POWERCELL; and Table 1-4

for the battery version.

Values shown in Table 1-2 are for an IND246 terminal with the internal COM2/DIO and

Ethernet options installed, and input from 8 x 350Ω load cells.

Display

Backlit 240 x 96 dot graphic LCD including weight display, weight units, gross/net

indication and graphic symbols for motion and center of zero, SmartTrac, operator

prompts and data entry display. Update rate of 12 updates per second.

Basic weight mode: 27 mm (1.1 in) high weight display

Application mode: 20 mm (0.8 in) high weight display

Weight Display

Maximum displayed resolution of 50,000 divisions.

Scale Types

Analog load cells (AC or battery models), POWERCELL PDX, GDD, SLC611D or

SLD615D load cells (POWERCELL model),

Number of Cells

AC Version: From one to ten 350-ohm load cells (2 or 3 mV/V)

Battery Version: From one to four 350-ohm load cells (2 or 3 mV/V)

POWERCELL Version: Up to 12 POWERCELL PDX, GDD, SLC611D or SLB615D load cells

Number of Scales

One

Analog

Update Rate

Internal analog: 366 MHz

POWERCELL

Update Rate

Update Rates (Hz)

Update Rate, Type

Vehicle, 12 load cells

Load Cell Network

25

Synchronized Continuous Weight

Output

USB, COM1,

COM2, Ethernet

17 - 25

Load Cell

Excitation Voltage

AC Version: 10 VDC

Battery Version : 5 V DC

1-4

METTLER TOLEDO IND246 and IND246 POWERCELL Installation Manual

64084463 | 03 | 12/2017

Introduction

IND246 Specifications

Minimum

Sensitivity

0.1 microvolt per increment

Keypad

25 keys; polyester overlay (PET) with polycarbonate display lens

Communications

Serial Interfaces

Standard: One isolated serial port (COM1) RS-232 (analog only); RS-232/RS-422-

RS-485 (POWERCELL only), 300 to 115,200 baud

Optional isolated serial port: (COM2) RS-232/485, 300 to 115,200 baud

Optional USB port: serial port bridge, 300 to 115,200 baud

Ethernet Interface

Optional Ethernet port: 10/100 TCP/IP port

Protocol

Serial Inputs: ASCII commands for CTPZ (Clear, Tare, Print, Zero), SICS (most level 0

and level 1 commands)

Serial Outputs: Continuous, Extended continuous, Demand (limited formats), Reports,

SICS (most level 0 and level 1 commands) or Variable Access

Approvals,

Analog Version

Weights and Measures

USA: NTEP Class III/IIIL - 10,000d; Cert. #11-040

Canada: Class III - 10,000d; Class IIIHD - 20,000d; AM-5819

Europe: Class III 6000e, Class IIII 1000e; TC7918, T8030

OIML: Class III 6000e, Class IIII 1000e; R76/2006-NL1-15.49R1

Product Safety

UL, cUL, CE

Approvals,

POWERCELL

Version

Weights and Measures

USA: : NTEP Class III/IIIL - 10,000d; Cert. #11-040

Canada: Class III - 10,000d; Class IIIHD - 20,000d; AM-5819

Europe: Class III 6000e, Class IIII 1000e; TC7918, T8426

OIML: Class III 6000e, Class IIII 1000e; R76/2006-NL1-15.49R1

Product Safety

UL, cUL, CE

Table 1-2: IND246 Power Consumption (AC Source)

Input Voltage I (mA) P (W)

85V/50 Hz 167 7.9

110 V/50 Hz 133 7.7

240 V/50 Hz 64 7.9

264 V/50 Hz 59 7.9

85 V/60 Hz 163 7.9

110 V/60 Hz 128 7.7

240 V/60 Hz 62 7.9

64084463 | 03 | 12/2017

METTLER TOLEDO IND246 and IND246 POWERCELL Installation Manual

1-5

Input Voltage I (mA) P (W)

264 V/60 Hz 58 8.0

Values shown are with internal COM2/DIO option and Ethernet option installed and load cell input

loaded with 8 x 350Ω load cells.

Table 1-3: Power Consumption for POWERCELL Version

Input Voltage I(mA) P(W)

85V/50Hz 112 5.7

110V/50Hz 94 6

240V/50Hz 73 8.4

264V/50Hz 72 8.7

85V/60Hz 108 5.8

110V/60Hz 92 6

240V/60Hz 73 8.3

264V/60Hz 73 8.6

Table 1-4: IND246 Average Battery Life, Analog Version

Continuous Operation Load

Battery Life

w/Backlight

Battery Life w/o

Backlight

1- 350Ω cell, no options 21.5 hrs 49 hrs

1 – 350Ω cell, COM2/DIO option 12.5 hrs 19 hrs

4 – 350Ω cells, no options 17. 5 hrs 32 hrs

4 – 350Ω cells, COM2/DIO option 11 hrs 15.5 hrs

1.3. Battery Performance

NOTICE

NiMH BATTERIES SLOWLY DISCHARGE WHEN NOT USED (FOR EXAMPLE WHEN STORED FOR FUTURE USE).

BATTERY OPERATED TERMINALS AND SPARE NiMH BATTERY PACKS IN STORAGE MUST BE FULLY CHARGED EVERY

THREE MONTHS TO PREVENT PERMANENT BATTERY DAMAGE.

1-6

METTLER TOLEDO IND246 and IND246 POWERCELL Installation Manual

64084463 | 03 | 12/2017

Introduction

1.4. Use in Hazardous Areas

WARNING

DO NOT USE THE IND246 TERMINAL IN AREAS CLASSIFIED AS HAZARDOUS BECAUSE OF

COMBUSTIBLE OR EXPLOSIVE ATMOSPHERES. CONTACT AN AUTHORIZED METTLER TOLEDO

REPRESENTATIVE FOR INFORMATION ABOUT HAZARDOUS AREA APPLICATIONS.

1.5. Inspection and Contents Checklist

Verify the contents and inspect the package immediately upon delivery. If the shipping container is

damaged, check for internal damage and file a freight claim with the carrier if necessary. If the

container is not damaged, remove the terminal from its protective package, noting how it was

packed, and inspect each component for damage.

If shipping the terminal is required, it is best to use the original shipping container. The terminal

must be packed correctly to ensure its safe transportation.

The package should include:

• IND246 Terminal

• Battery Pack (battery version only)

• Mounting brackets (2; analog version only)

• Safety Instructions

• Resource CD (includes all manuals)

• Bag of miscellaneous parts

64084463 | 03 | 12/2017

METTLER TOLEDO IND246 and IND246 POWERCELL Installation Manual

1-7

1.6. Model Identification

The IND246 and IND246 POWERCELL model number, factory number and serial number are

located on the data plate of the terminal. Refer to Figure 1-1 to verify the configuration of the

IND246 terminal when it left the METTLER TOLEDO factory.

Figure 1-1: IND246 Configuration Chart

1-8

METTLER TOLEDO IND246 and IND246 POWERCELL Installation Manual

64084463 | 03 | 12/2017

Introduction

1.7. Physical Dimensions

The physical dimensions of the IND246 enclosure are shown in Figure 1-2 and Figure 1-3 in mm

and [inches].

Figure 1-2: IND246 Enclosure Dimensions

Figure 1-3: IND246 Dimensions with Brackets

64084463 | 03 | 12/2017

METTLER TOLEDO IND246 and IND246 POWERCELL Installation Manual

1-9

1.8. Main PCB

The IND246 terminal’s main printed circuit board (PCB) provides the analog load cell scale

interface, as well as the COM1 RS-232 serial port. The IND246 POWERCELL main board provides

the load cell interface and a standard COM1 RS-232/RS-422/RS-485 isolated serial port.

The main board also contains the power input connection (for either AC supply or battery,

depending on the model), display interface, keypad interface and six-position DIP switch.

An SD memory card socket is mounted to the PCB to support the optional SD memory and bus

connectors are included for the option boards.

1.8.1. SD Memory

An SD Memory card is included as a standard feature of the analog version of the IND246, and is

available as an option for the POWERCELL version. The card provides a medium on which to store

files such as Alibi memory, transaction records in the vehicle application, IDs in the counting

application and target weights in the checkweighing application.

The SD memory can be used to extract and save the configuration and calibration settings of the

terminal. These can then be restored to the terminal or loaded to a different terminal.

1.9. Scale Bases

1.9.1. Analog

The standard IND246 terminal supports analog scale bases and provides either 10 volts (AC

version) or 5 volts (battery version) of excitation to drive analog load cells. Up to four (battery

version) or ten (AC version) 350Ω load cells can be powered by the terminal.

A six wire load cell connection is provided with sense lines to help maintain accuracy as the load

cell cable resistance changes with temperature variations.

1.9.2. POWERCELL

The IND246 POWERCELL terminal supports scale bases that use POWERCELL PDX, GDD,

SLC611D or SLB615D load cells. Up to 12 load cells can be configured in a single scale platform.

The load cell network provides monitoring and logging of a variety of factors that can affect system

integrity, including weighing errors, overloads and network health. The specific characteristics differ

by type of load cell.

1-10

METTLER TOLEDO IND246 and IND246 POWERCELL Installation Manual

64084463 | 03 | 12/2017

Introduction

1.9.3. PowerDeck

The IND246 POWERCELL supports PowerDeck

TM

weighing platforms. These provide calibration

without weights for fast installation and visual guidance for leveling the floor platform.

Figure 1-4: IND246 POWERCELL with PowerDeck Platform

1.10. Options

The following options are available for all versions of the IND246:

• COM2 Serial Port

One RS-232/485 isolated serial COM port

•

COM2 and DIO (relay output)

One RS-232/485 isolated serial COM port

Internal, discrete I/O (2 inputs and 4 outputs; supported in analog version only)

─ Inputs are optically isolated solid state and switch selectable as either active or passive

─ Output relays provide one normally open contact per relay

•

USB Port

One USB 2.0 compliant port, hardware bridge. Acts as virtual (UCP) COM port

•

USB and DIO (relay output)

One USB 2.0 compliant port, hardware bridge. Acts as virtual (UCP) COM port

Internal, discrete I/O (2 inputs and 4 outputs; supported in analog version only)

─ Inputs are optically isolated solid state and switch selectable as either active or passive

─ Output relays provide one normally open contact per relay

•

Ethernet Port

One 10/100 Ethernet port with automatic link polarity detection and correction. Supports TCP/IP socket

connection. Does not support FTP

1.10.1. COM2 Serial Port

This optional port provides RS-232 and RS-485 communication at rates from 300 to 115.2k baud.

The port is bidirectional and can be configured for various functions such as demand output,

continuous output, extended continuous output, SICS host communications or ASCII command

input (C, T, P, Z).

La page est en cours de chargement...

Mettler Toledo IND246 Terminal Guide d'installation

Ce manuel convient également à

Mettler Toledo IND246 Terminal Guide d'installation

dans d''autres langues

Documents connexes

Autres documents