6
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed
including the following:
1. Read all instructions carefully.
2. Avoid electrical shock: do not immerse cord plug, base, or motor in water or other liquid;
never put a wet plug into a socket, or handle with wet hands; to clean the motor base, wipe
with a damp cloth and dry promptly.
3. Close supervision is necessary when any appliance is used by or near children.
4. Unplug from outlet when not in use.
5. Avoid contact with moving parts.
6. Do not operate any appliance with a damaged cord or plug.
hot surfaces.
9. A rubber spatula is recommended to avoid scratching the Blending Cups.
10. Blades are sharp; handle carefully.
11. To avoid injury, properly attach the blades to the Blade Base.
12. Do not blend liquids over 104°F in the Blending Cups.
14. Do not use outdoors.
15. Always use on a sturdy, level surface.
16. Wash cups and blade assemblies immediately after each use.
17. In continuous operation mode, always allow the machine to rest for at least one
minute between consecutive blending cycles of 30 seconds.
con secutive cycles.
19. Product is intended for household use only, not for commercial use.
20. Store cups with either the cup lid or the blade base assembled. Make sure the parts are
thoroughly dry.
21. This appliance has a polarized plug. To reduce the risk of electric shock, this plug will fit in
a polarized outlet only one way. If the plug does not fit properly in the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.
SAVE THESE INSTRUCTIONS
WARNING
1. To prevent electric shock, unplug before cleaning.
2. To ensure continued protection against risk of electric shock, connect to properly earthed
outlets only.
3. Do not immerse in water.