3M RelyX™ Luting Plus Cement Mode d'emploi

Taper
Mode d'emploi

Ce manuel convient également à

RelyX
Luting Plus Automix
Resin Modified Glass Ionomer Cement
Indications
• Porcelain fused to metal (PFM) crowns and bridges
• Metal crowns, bridges, inlays, onlays
Crowns made with all-alumina or all-zirconia cores such as
3M
ESPE
Lava
or Procera
®
AllCeram
• Prefabricated or cast endodontic posts
• Orthodontic bands and appliances
Porcelain fused to metal (PFM), metal, all-alumina or all-zirconia
core restorations on implant abutments
1
Tooth Preparation
1. Remove provisional restoration and all
temporary cement.
1 of 4
2
2. Clean tooth with oil-free pumice paste.
RelyX
Luting Plus Automix
Resin Modified Glass Ionomer Cement
2 of 4
4
4. Do not over dry the tooth. Over drying can
lead to post operative sensitivity.
5a
Working time of mixed cement is 1.5 minutes
5a. Squeeze out and discard a peppercorn-size
quantity of mixed paste.
5b
5b. Apply a thin layer of cement to the inside
surface of the restoration.
3
Tooth Preparation (cont.)
3. Rinse and lightly dry. Leave tooth surface moist.
3 of 4
RelyX
Luting Plus Automix
Resin Modified Glass Ionomer Cement
7. Excess cement can be removed after
2 minutes in the mouth or tack light
curing 5 seconds per surface.
7
6
Placement of Restoration
6. Seat restoration with firm pressure.
8
8. Set time is 5 minutes after placement
in the mouth.
RelyX
Luting Plus Automix
Resin Modified Glass Ionomer Cement
3M ESPE
Dental Products, St. Paul, MN 55144-1000 USA • www.3MESPE.com
3M ESPE Customer Care/MSDS Information:
U.S.A. 1-800-634-2249 and Canada 1-888-363-3685
3M, ESPE, Lava and RelyX are trademarks of 3M or 3M ESPE AG, used
under license in Canada. © 3M 2011. All rights reserved. Procera is a
trademark of Nobel Biocare.
3M, ESPE, Lava et RelyX sont des marques de commerce de 3M ou de
3M ESPE AG, utilisées sous licence au Canada. © 3M 2011. Tous droits
réservés. Procera est une marque de commerce de Nobel Biocare.
9
For best results, please keep the syringe tip clean. For storage, discard the used
mixing tip and replace original sealing cap onto the the syringe. Or, leave the
used mixing tip on the syringe as a cap until the next application. NOTE: Do not
store syringe with a new, unused mixing tip attached onto syringe. An unused
mixing tip does not properly seal the syringe and may affect product shelf life.
4 of 4
44-0007-4987-7-A
Placement of Restoration (cont.)
9. Finish restoration and adjust occlusion.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

3M RelyX™ Luting Plus Cement Mode d'emploi

Taper
Mode d'emploi
Ce manuel convient également à

dans d''autres langues