RocketFish RF-NBKPD Manuel utilisateur

RocketFish
Marque
RocketFish
Modèle
RF-NBKPD
Taper
Manuel utilisateur
Wireless Notebook Keypad
Pavé numérique sans fil pour ordinateur portatif
Teclado numérico inalámbrico para PC portátil
User Guide Guide de l’utilisateur Guía del Usuario
RF-NBKPD
1
RF-NBKPD
Rocketfish RF-NBKPD
Wireless Keypad
Contents
Introduction...........................................................2
Features...................................................................3
Using the keypad.................................................6
Troubleshooting...................................................8
Specifications........................................................9
Legal notices.......................................................10
Français....................................13
Español.....................................26
RF-NBKPD.fm Page 1 Monday, August 7, 2006 1:08 PM
2
Introduction
Congratulations on your purchase of the
Rocketfish wireless notebook keypad. This
device can be used as either a wireless
computer keypad or as a standalone
calculator.
This guide explains how to correctly operate
and get the best performance from your
wireless keypad. Read this user guide
carefully before using your wireless keypad,
then keep it with your wireless keypad for
quick reference.
Before you begin, verify that the package
contains:
• Wireless notebook keypad
•USB receiver
• 1 AAA battery
•Carrying case
•User guide
If any item is missing or damaged, contact
Rocketfish at (800) 305-2204.
RF-NBKPD.fm Page 2 Monday, August 7, 2006 1:08 PM
3
RF-NBKPD
Features
• Interference-free operation with a
27 MHz wireless connection
• 4,096 security codes
•On/off switch
• Automatic power saving management
• Receiver storage compartment on the
bottom of the keypad to make travel
easy
System Requirements
Hardware
• Intel Pentium processor or equivalent
• USB 1.1 or 2.0 interface
Operating System
• Windows 98, Windows NT, Windows ME,
Windows 2000, or Windows XP
RF-NBKPD.fm Page 3 Monday, August 7, 2006 1:08 PM
4
Identifying features
Top
Component Description
LCD panel View entries when using the device as a standalone
calculator.
Send button Press to send numbers that appear on the LCD panel
directly to your computer.
Mode mode Press to change from standalone calculator mode to
keypad mode.
Send
Mode
LCD panel
RF-NBKPD.fm Page 4 Monday, August 7, 2006 1:08 PM
5
RF-NBKPD
Bottom
Component Description
Power switch Slide to turn the keypad on and off.
Battery
compartment
Insert an AAA battery in this compartment.
Connect button Press to synch the keypad with the USB receiver.
Receiver
compartment
Carry the USB receiver in this compartment when
traveling.
Power
switch
Battery
compartment
Connect button
Receiver
compartment
RF-NBKPD.fm Page 5 Monday, August 7, 2006 1:08 PM
6
Using the keypad
Setting up the keypad
To Install the batteries:
1 Open the battery cover located on the
bottom of the keypad.
2 Insert the battery to match the correct
positive (+) and negative (-) polarity.
3 Close the battery cover until it clicks
firmly into position.
Note: When replacing the battery, use an
alkaline or other heavy-duty NiMH
battery.
To connect the receiver to your computer:
1 Remove the USB receiver from the back
of the keypad.
2 Plug the receiver into an available USB
port on your computer.
The indicator LED light flashes once
when the receiver is initially plugged
into your computer.
RF-NBKPD.fm Page 6 Monday, August 7, 2006 1:08 PM
7
RF-NBKPD
The message Rocketfish Wireless NB Keypad
appears on your computer screen
indicating your receiver is ready to synch
with your keypad.
To synch the keypad to the receiver:
1 Slide the power switch on bottom of the
keypad to the ON position.
2 Press the connect button on the
receiver. The LED turns on indicating the
receiver is ready to synch.
3 Press the connect button on the bottom
of keypad. The LED turns off indicating
the computer has detected the reciver,
the receiver and keypad are synched,
and the keypad is ready for use.
Note: You must press the connect button
on the receiver and keypad within 8 to
10 seconds of each other. If you do not,
the receiver automatically turns off.
RF-NBKPD.fm Page 7 Monday, August 7, 2006 1:08 PM
8
Troubleshooting
Problem Solution
The keypad does not work. • Make sure that the battery is inserted
correctly. The positive (+) and negative
(-) ends of the battery must match the
positive (+) and negative (-)
connections in the battery
compartment.
• Make sure that the receiver's USB
connector is firmly inserted into the USB
port on your computer.
• Make sure that you have synched the
keypad and receiver and established a
communication link.
When you use the keypad,
other wireless devices work
more slowly or fail
temporarily.
• The keypad may cause interference with
cordless, radio-based devices that
operate at 27 MHz, such as a telephone,
baby monitor, or toy. To reduce
interference, move the affected device
away from the keypad and receiver.
• Reset the keypad's security code by
resynching the receiver and keypad.
RF-NBKPD.fm Page 8 Monday, August 7, 2006 1:08 PM
9
RF-NBKPD
Specifications
Keys................................................................... 19 standard keys
Keystroke lifetime.............................................10,000,000 cycles
Security code ...................................4096 different security codes
RF transmission mode .................. 1 channel FSK RF transmission
......................................27.045 MHz channel bandwidth: 25 KHZ
Tx emission level............. 60dBuV/m ≤ E3m ≤ 80dBuV/m at 3 m
The keypad’s response time
is slow or the keypad
intermittently stops
working.
• Increase the distance between the
receiver and the rest of your computer
equipment.
• Increase the distance between the
receiver and keypad from other wireless
devices.
• Turn off any wireless devices that are
near the keypad and receiver.
• If you are using the keypad on a metallic
surface, move it and the receiver to a
non-metallic surface. Metals, such as
iron, aluminum, or copper, shield the
radio frequency transmission and may
slow down the keypad's response time
or cause the keypad to fail temporarily.
• Replace the battery.
Problem Solution
RF-NBKPD.fm Page 9 Monday, August 7, 2006 1:08 PM
10
Batteries.................................................................... 1 x AAA Size
Power consumption ............................ Keyboard ≥15mA (Active)
..................................................... ≤ 100 uA (Suspend)
Battery life ............60 hours at active mode with alkaline battery
Operating distance................................................... 4.9 ft (1.5m)
Storage temperature.........................-40°F~131°F (-40°C~55°C)
Working temperature.............................32°F~104°F (0°C~40°C)
Operating humidity.....................................................40%~90%
Keypad dimensions ................................. 5.5 × 3.8 × 1.32 inches
........................................................... (139.6 × 96.6 × 33.5 mm)
Receiver dimensions............................ 2.13 × 0.65 × 0.39 inches
................................................................ (54.2 × 16.5 × 10 mm)
Legal notices
FCC compliance
This device complies with Part 15 of the FCC
Rules. Operation of this product is subject to
the following two conditions: (1) this device
may not cause harmful interference, and (2)
this device must accept any interference
received, including interference that may
cause undesired operation.
RF-NBKPD.fm Page 10 Monday, August 7, 2006 1:08 PM
11
RF-NBKPD
This equipment has been tested and found to
comply within the limits for a class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in
a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be
determined by turning the equipment off
and on, the user is encouraged to try to
correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
RF-NBKPD.fm Page 11 Monday, August 7, 2006 1:08 PM
12
• Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced
technician for help.
RSS-310 Statement
To reduce potential radio interference to
other users, the antenna type and its gain
should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not
more than that permitted for successful
communication.
Canadian ICES-003
This Class B digital apparatus complies with
Canadian ICES-003 Statement.
© 2006 Rocketfish. Rocketfish and the
Rocketfish logo are trademarks of Best Buy
Enterprise Services, Inc. Other brands and
product names are trademarks or registered
trademarks of their respective holders.
Specifications and features are subject to
change without notice or obligation.
For service and support call (800) 305-2204.
RF-NBKPD.fm Page 12 Monday, August 7, 2006 1:08 PM
13
RF-NBKPD
Pavé numérique sans
fil Rocketfish RF-
NBKPD
Table des matières
Introduction........................................................14
Fonctionnalités..................................................15
Fonctionnement du pavé numérique.......18
Problèmes et solutions ...................................20
Spécifications.....................................................22
Avis juridiques....................................................23
RF-NBKPD.fm Page 13 Monday, August 7, 2006 1:08 PM
14
Introduction
Félicitations d’avoir acheté ce pavé
numérique sans fil avec calculatrice de
Rocketfish. Ce périphérique peut être utilisé
comme pavé numérique sans fil pour
ordinateur ou comme calculatrice autonome.
Ce manuel explique le fonctionnement et la
façon d’obtenir les meilleures performances
du pavé numérique sans fil. Lire ce guide de
l’utilisateur avec attention avant d’utiliser ce
pavé numérique sans fil et le conserver à
proximité de ce dernier pour pouvoir s’y
référer rapidement.
Avant de commencer, vérifier que
l’emballage contient les articles suivants :
• Pavé numérique sans fil pour ordinateur
portatif
• Récepteur USB
• 1 pile AAA
•Étui de transport
• Guide de l’utilisateur
Si un article manque ou est endommagé,
contacter Rocketfish au (800) 305-2204.
RF-NBKPD.fm Page 14 Monday, August 7, 2006 1:08 PM
15
RF-NBKPD
Fonctionnalités
• Fonctionnement sans interférences avec
une connexion sans fil de 27 MHz
• 4 096 codes de sécurité
•Touche Marche/Arrêt
• Gestion d’économie d’énergie
automatique
• Compartiment de rangement pour le
récepteur sous le pavé numérique pour
faciliter le transport
Configuration nécessaire
Matériel
• Processeur Pentium Intel ou équivalent
• Interface USB 1.1 ou 2.0
Système d'exploitation
• Windows 98, Windows NT, Windows ME,
Windows 2000 ou Windows XP
RF-NBKPD.fm Page 15 Monday, August 7, 2006 1:08 PM
16
Fonctionnalités
Dessus
Éléments Description
Affichage ACL Affichage des entrées quand le pavé numérique est
utilisé comme calculatrice autonome.
Touche envoi Permet d’envoyer les chiffres affichés sur l’écran ACL
directement à l’ordinateur.
Touche mode Permet de passer du mode calculatrice autonome au
mode pavé numérique.
Envoi
Mode
Affichage
ACL
RF-NBKPD.fm Page 16 Monday, August 7, 2006 1:08 PM
17
RF-NBKPD
Dessous
Éléments Description
Touche Marche/Arrêt Permet de mettre le pavé numérique sous et
hors tension.
Compartiment des piles Insérer une pile AAA dans ce compartiment.
Touche de connexion Permet de synchroniser le pavé numérique
avec le récepteur USB.
Compartiment pour le
récepteur
Permet de transporter le récepteur USB
pendant les déplacements.
Touche
Marche/
Arrêt
Compartiment
des piles
Touche de
connexion
Compartiment
pour le
récepteur
RF-NBKPD.fm Page 17 Monday, August 7, 2006 1:08 PM
18
Fonctionnement du pavé
numérique
Installation du pavé numérique
Pour installer les piles :
1 Ouvrir le compartiment des piles situé
au dos du pavé numérique.
2 Insérer la pile en faisant correspondre les
pôles positifs (+) et négatifs (-) de
polarité.
3 Refermer le compartiment des piles
jusqu’à enclenchement.
Remarque : N’utiliser que des piles
alcalines ou du type longue durée
NiMh.
Connexion du récepteur à l’ordinateur :
1 Retirer le récepteur USB situé au dos du
pavé numérique.
2 Brancher le récepteur USB sur un port
USB de l’ordinateur.
Le témoin à DEL clignote une fois lors du
premier branchement du récepteur sur
l’ordinateur.
RF-NBKPD.fm Page 18 Monday, August 7, 2006 1:08 PM
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41

RocketFish RF-NBKPD Manuel utilisateur

RocketFish
Marque
RocketFish
Modèle
RF-NBKPD
Taper
Manuel utilisateur
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes

Autres documents