Iomega Buz Installation and User Manual

multimedia

producer

™

For Pentium

®

Based PCs Running Windows

®

95

Für Pentium

®

-PCs mit Windows

®

95

Pour PC équipés d’un processeur Pentium

®

et fonctionnant sous Windows

®

95

Installation and

User’s Guide

Installations- und

Benutzerhandbuch

Guide d’installation

et de l’utilisateur

TABLE OF CONTENTS

Installation and User’s Guide 1

Installations- und Benutzerhandbuch 19

Guide d’installation et de l’utilisateur 39

Welcome to Buz

™

Multimedia Producer!

The Buz package includes:

The Buz Card:

The Buz Adapter card is a PCI video capture card to input and digitize video.

It is also an intelligent, high-performance PCI* Ultra-SCSI** host adapter designed for

Pentium-based PCs using Windows

®

95, ideally suited for connection to Iomega’s Jaz

®

and

Zip

®

SCSI drives.

*PCI–Peripheral Component Interconnect–is a local bus interface that enables high speed data

transfer.

**SCSI (pronounced SKUH-zee) is an acronym for the Small Computer System Interface - an

industry standard for connecting peripherals to personal computers.

Check the Buz box Connections section of this guide for additional technical information.

The Buz Box:

Connect video devices such as a VCR, laserdisk, DVD, television or a Camcorder to your

computer through the Buz box.

The Audio/Video Cable:

The A/V cable connects audio and video from your input devices, such as a Camcorder, to the

output devices, such as a VCR or television.

The CD Jewel Case:

CD #1: The integrated installer for:

• MGI video Wave SE Plus Software for Buz™

• PictureWorks Hotshots™ Software (With NetCard™ Trial)

• Iomega RecordIt™ Software

• Buz drivers and utilities

Multimedia Tutorial

• Guide to Making Better Movies

CD #2: HotShots CD for Photo Page printing

Tutorials and other Stuff

• MGI VIdeoWave Tutorial (retail version)

• MGI Video Wave SE Plus Software for Buz™ EasyGuide

• Sample video and audio files

The Installation Guide will lead you through the installation process including how to

connect your Buz box to the back of your computer and to video and audio devices.

MGI Video Wave SE Plus Software for Buz™ EasyGuide steps you through the software

basic functions such as capturing video and audio, producing, still capturing and saving your

productions.

The Welcome Packet:

The Welcome Packet contains registration information and important information about

accessories and other Iomega products.

Buz Performance Characteristics

Video Specifications

Compression Hardware Motion JPEG (MJPEG)

Resolution Up to 720x480 at 30 frames per second (60 fields) NTSC

Up to 768x576 at 25 frames per second (50 fields) PAL/SECAM

Up to 24 bit (16 million) colors

Video Data Rate Up to 6MB/sec sustained

Capture Format AVI

Production Format AVI, MOV, MPEG output format

Video Playback Playback of MJPEG AVIs via onboard hardware

Playback of MJPEG AVIs via software on non-Buz equipped computers (uses BuzPlay.exe)

Still Images Capture up to 720x480 at 24 bit color from video

Video In/Out Composite (RCA) and S-Video (Mini DIN)

Audio In/Out Stereo RCA pass-through to existing industry standard sound card Audio synchronization

and

capture at up to 16 bit stereo, 44.1 kHz

SCSI Specifications

Technology Ultra SCSI

Interface 32 bit PCI bus mastering, PCI 2.1 compliant, Plug and Play onboard BIOS for bootable

operation

Transfer Rates Up to 20MB/sec sustained

Connectors HD50 external and 50 pin internal ribbon

Index

Buz Card Installation (see note below) .................................................................. 3

Buz Box Connections ........................................................................................... 6

Audio Settings ...................................................................................................... 8

Video/Audio Connections .................................................................................. 10

SCSI Guidelines ................................................................................................. 11

Software Features ................................................................................................ 11

Software Electronic Documentation Information ............................................... 12

Troubleshooting ................................................................................................. 13

How To Get Help .............................................................................................. 16

Regulatory Agency Statements ............................................................................ 18

Legal Basics ......................................................................................................... 18

왎 NOTE: Buz Multimedia Producer

TM

is a technologically sophisticated package. Ensure your system

has the latest video and audio drivers installed. It is recommended that you optimize your hard drive

using Windows 95 system tools such as Scan Disk and Disk Defragmenter and, before installation,

disable all system crash recovery, anti-virus software, or other background-running software. For more

troubleshooting information see Iomega’s web site: www.iomega.com.

왎

2

Buz Card Installation

1. Locate the software CD marked

‘Start Here Disk #1’

Buz Box

Buz Card

A/V-Cable

Buz CDs

Buz Installation Guide

and the MGI EasyGuide

2. Don’t get Stung! Install your software first.

Buz will not function correctly if you do not load your software first.

Start your computer. When your system has completely booted into the Windows 95 Desktop,

put the CD marked Start Here (Disk 1) into your CD-ROM drive and follow the instructions

on the screen. If the install program does not automatically start, double-click on the CD-

ROM drive icon then double click on the Start icon.

The default install settings will automatically install the software and drivers. When the software

is installed and you have watched the Buz Multimedia Producer Installation Tutorial, proceed

to the next step.

3. Shut down and turn off your computer. Disconnect the

power cord, then remove the computer cover.

Disconnect power from

the computer

왎 NOTE: Most computers have three or four rear-panel screws holding the cover. See your

computer manual if the cover removal is unclear. 왎

3

4. Locate any vacant PCI expansion slot and remove the

expansion slot cover. (Save the slot cover screw for use

in the next step.)

Computers have either

VERTICAL or HORIZONTAL

expansion slots.

Use any PCI slot

Expansion slot cover

(remove and save)

Slot cover screw

(remove and save)

ISA slots

Tower

Desktop

PCI Slot

ISA Slot

왎 NOTE: If your computer is a tower type, it is safer to lay it on it’s side for installing the

Buz card to avoid pushing it over as you insert the card. 왎

5. Unpack the Buz card.

CAUTION Touch a grounded metal object to discharge any build-up of static electricity

before handling the Buz card. 왎

Handle the card by its edges. If you lay it down, place it on the static-proof bag it is shipped in.

4

6. Push the Buz card FIRMLY into the PCI slot, then replace

the PCI slot cover screw.

Bracket

flush to chassis

Connector fits evenly

PCI slot

Ensure the bracket fits flush against the chassis. If you currently have an Iomega Jaz

®

Jet

®

SCSI

adapter card on your system, we recommend replacing it with the Buz card now. See caution

below. The connector should seat evenly on both ends of the PCI slot to ensure a good

connection.

CAUTION Do not connect a SCSI boot drive or SCSI CD-ROM drive to the Buz card until

after you have installed the Buz software. 왎

왎 Internal drive installation: If you are connecting an internal SCSI drive to the SCSI

connector on your Buz card, you may want to install or connect it at this time. Install your

software first or your computer may not recognize the Buz card or any other drives you

connect to it. 왎

7. Replace the computer cover. Do not plug your

computer in or start your computer yet! Proceed to the

Buz box connections on the next page.

5

Buz Box Connections

1. Connect the Buz cable to the back of your computer.

The longer connector on the back of the Buz card is the connector for external SCSI devices

(such as Jaz® and Zip® SCSI drives). The Buz card connects to a variety of SCSI devices. See

your SCSI device documentation for proper connection. Also see the SCSI Guidelines section in

this booklet.

SCSI Connector

Fifteen-Pin Connector

Buz Card Connectors

왎 NOTE: If your external SCSI device does not match the connector on the

back of the Buz card, purchase a quality cable converter. 왎

Buz Box

Connector

External SCSI Connector

Buz Box Speaker Out (Pass-through)

Connector

Your Existing

Speaker's Connector

Buz Box Audio In

Connector

6

Buz box connector: The fifteen-pin connector of the Buz box goes to the matching

connector of the Buz card. Look at this plug carefully. Check orientation before connecting.

After connecting, tighten thumb screws. Avoid bending any pins.

Audio In: The smaller of the two Buz box connectors is the Audio In connector. The

computer may have an Audio In symbol, or it may say ‘Audio In’ or ‘Input’, depending upon

your system. The Microphone connection can also be used as ‘Audio In’ but it is not the

prefered connection.

Audio In

Microphone

Plug the 'Audio In' connector into either

'Audio In' or 'Microphone' on the back of your computer

'Audio in' Connector

from Buz Box

Universal Symbols

왎 NOTE: Universal symbols for Audio In and Audio Out may be stamped on the back of

your computer. The same symbols are stamped on the Buz box audio plugs. 왎

Audio Out: The larger of the two Buz audio connectors is the Audio Out Pass-through

connector and goes on the back of your computer. The connection on the back of your

computer may have an Audio Out or Speaker Out symbol on it or it may say ‘Speaker Out’,

depending upon your system. If you have external speakers, disconnect and reconnect into the

back of the audio out Pass-through connector so your speakers will work.

Plug the Buz Audio Output "Passthrough" connector

into the back of your computer

Audio Out

Audio Output

'Passthrough'

Connector

Unplug your existing

External 'Speaker Out'

connector and reconnect it

into the back of the 'Passthrough'

Speaker Out

(Some systems Have

this connection only for

sound output)

Headphones

Best connection

Universal Symbols

7

왎 NOTE: Most sound cards will use the standard ‘mini’ stereo jack. If your system does not

have a ‘mini’ jack, purchase an adapter. 왎

2. After the Buz box has been connected, reconnect the

power to the back of your computer and start your

system.

a. After you start your computer, Windows 95 will display the message: ‘Found New Hardware:

PCI SCSI adapter’, and then will identify it as Iomega Buz: PCI Ultra SCSI Host Adapter and will

automatically load the drivers.

b. It will then identify a PCI Multimedia Video Device and identify it as Iomega Buz Multimedia

Producer and will automatically load drivers for this also. You will then be prompted to restart

the computer. Click Yes.

3. Change your Audio Out settings from the Windows 95

screen.

When your system has restarted, double-click on the small speaker icon in the lower right-hand

corner of the Windows 95 main window. The Master Volume screen will appear. Ensure that the

Mute All and Mute boxes are NOT selected.

왎 NOTE: If the speaker icon is not present,

refer to your system’s User’s Manual. 왎

a. Go to Options and select Properties.

왎 NOTE: Some systems have their own audio controls and will look different. Ensure

muting is turned off and the check box that matches your Audio In connections is

selected in the recording control. 왎

b. Choose Recording option from the Properties

window then click OK.

8

4. Plug your audio and video input and output devices into

the Buz box.

S-Video Output

Composite Video

Output

Left Channel

Right Channel

Buz Box Connections

Audio input

S-Video Input

Composite Video

Input

Video Input

Video Output

Audio Output

Left Channel

CAUTION If you are using S-Video, ensure that your are connecting a four-pin S-Video

plug into the Buz box S-Video connector. 왎

CAUTION Do not connect your audio equipment to the composite video input or output

jack. You could damage your equipment or your Buz card. 왎

c. From the Recording Control window check

the select box that matches your Audio In

connections(s).

Close the Window

9

Audio Input/Output: The Buz box uses universal color codes for video and audio

connectors. The left-channel is WHITE and the right-channel is RED. Simply match the

colors for proper connection.

(See illustration on previous page)

If your electronic device has a single audio connector for sound, connect it to the Left or WHITE

channel. If it is a single connector, you will not use the right channel, or RED connector.

Composite Video Input/Output: The RCA connector for composite video uses the

universal yellow color code. Composite video connectors are the same type as the RCA audio

connectors; do not connect audio to this jack.

S-Video Input/Output: This cable is not included in the Buz package. The four-pin S-

Video input is used with some video equipment such as VCRs, video cameras or televisions.

This plug has a small ‘key’ on the connector that directs you to plug it in correctly. Look closely

at your S-Video connector and plug for correct orientation.

(See the illustration on the previous page)

CAUTION Do not connect Composite and S-Video inputs at the same time. Use one or

the other. 왎

Video/Audio Connections

Video: If your Camcorder or VCR has an S-Video connector, use it for better video quality.

To select S-Video, launch MGI VideoWave. Go to the Capture Screen, set Video Format and

choose S-Video.

Audio: If your system has only one audio connector, use the left (white) channel for the single

sound connection.

Input Devices: Connect the ‘OUT’ connectors of your camcorder, VCR, DVD, etc., into

the ‘IN’ side of the Buz box.

Output Devices: Connect the ‘OUT’ connectors from the Buz box to the ‘IN’ connectors

on your VCR. If your television is hooked to your VCR you’ll be able to monitor output.

(Output devices are not necessary for Buz to function properly.)

"OUT"

Side

"IN"

Side

VCR or TV

Typical Camcorder, Buz, VCR/TV Hookup

Input

Audio

Output

Video

Output

10

S-Video Connector

Key

SCSI Guidelines

The Small Computer System Interface (SCSI) is an industry standard for connecting peripherals

to personal computers. SCSI rules define how to connect more than one SCSI device to the

same SCSI connection (either built-in or from a SCSI host adapter).

A SCSI chain is a series of SCSI devices cabled one to another on a single SCSI connection.

When using Ultra SCSI performance, it is important to use only shorter, premium quality data

cables for any drives connected to the Buz card.

For a SCSI chain using Ultra SCSI, ensure that the combined chain length does not exceed l.5

meters (about 5 feet.)

The Buz card is factory set at SCSI ID 7 with automatic termination. For detailed installation

information, consult your SCSI device’s installation manual.

Congratulations!

You have finished installing and hooking up your new Buz Multimedia Producer

Hardware and Sofware. Familiarize yourself with the software by viewing the

tutorials in the following order: ‘MGI VideoWaveTutorial’ (retail version) (CD

#2). Using the MGI EasyGuide for Buz (CD#2), work through the ‘MGI video

Wave SE Plus Software for Buz™ EasyGuide‘ manual. As you become more

proficient at video editing, view ‘How to Make Better Videos’ (CD#1). To begin

the tutorials, insert the CD#1 or #2 in your CD-ROM drive and follow the

instructions on the screen. If it doesn’t start automatically, click on the CD icon,

then click start.

HAVE FUN!

Software Features

Creating productions can be easy and fun using the software included in the Buz Multimedia

Producer.

To open any Buz application software, double-click on the Iomega Buz icon on the Windows

95 Desktop. Double-click the Buz Audio, Video or Photo icons, now launch the desired

application.

RecordIt

TM

is audio recording software for your computer! This new multimedia package from

Iomega records music, conversations, even lectures and meetings to your Jaz® and Zip® disks.

• Record from a microphone right onto your hard drive or onto a Jaz® or Zip® disk.

• Record audio files from a compact disc directly onto a Jaz® or Zip® disk, then take those

recordings anywhere there is a Jaz® or Zip® drive.

• Compile your favorite audio tracks from multiple sources onto a single Jaz® or Zip® disk.

• Play recorded files directly from Jaz® or Zip® disks or your hard drive.

• Integrate your RecordIt files with your video productions in a snap, using

MGI VideoWave SE Plus Software for Buz.

(See MGI Video Wave SE Plus Software for Buz™ EasyGuide.)

11

12

왎 NOTE: If you have a previous version of RecordIt™ installed on your system, uninstall it

and use the new version that comes with Buz. Buz cannot use files created by a version of

RecordIt lower than1.1. 왎

MGI VideoWave SE Plus Software for Buz™ spices up your home movies by adding

text, transitions and sound.

The tutorial on CD #2 guides you through the basic functions of the software. The EasyGuide

inside the CD jewel case will lead you through a brief production to get you started creating

your own productions.

PictureWorks HotShots

gives you everything you need to get still images imported from

MGI VideoWave SE Plus, your digital camera, DVD, scanner, network, disks, CD or the

Internet onto your computer.

• Organize, enhance and share your pictures

• Use HotShots to put great looking images into your work

PictureWorks NetCard

(trial version) can send your pictures as “digital postcards” via e-

mail. NetCards are interactive multimedia postcards. Now you can E-mail pictures to friends,

family, colleagues, etc., over the Internet.

• Send pictures and movies via standard e-mail

• Send self-playing NetCards, no special software required to view

• NetCards attach to any e-mail

• At less than 350KB, NetCards are small and easy to send

Electronic Documentation for RecordIt, MGI VideoWave SE Plus, and

PictureWorks HotShots software and NetCard (Trial version)

are available on CD #2

Possible SolutionsResource Conflicts

1. During install Windows 95 device

manager appears on the screen and says

there is a system resource conflict.

Other resource conflicts:

• Buz does not function but shows no error

message.

• SCSI device not detected.

• Video capture does not work.

• Sound card not functioning.

• Other devices not functioning.

2. Buz is not functioning properly.

Either the ‘Iomega: Buz PCI Ultra SCSI

Host Adapter’ or the ‘Iomega Buz

Multimedia Producer’ portion of the Buz

card is NOT seen in Device Manager.

3. System does not support multifunction

card.

• Drive letter not assigned to SCSI devices

connected to Buz. During reboot, blue

and yellow Iomega Jaz® Jet PCI BIOS

screen does not appear.

and

• MGI software locks up.

and

• Windows 95 Device Manager SCSI

controllers section displays the Buz SCSI

controller with the problem icon (!).

• If a red “X” is present, continue with install.

• See Windows 95 System Information for resolving

conflicts, or see Iomega’s web site for more information.

(See Help/If you have a Hardware Conflict/Start the

Hardware Conflict Troubleshooter.)

• See other solutions below.

• Check all cable connections.

• Ensure the Buz card is correctly installed and seated

properly in the PCI slot.

• Look for system conflicts by double-clicking on My

Computer icon, then the Control Panel icon, then the

System icon, then the Device Manager. In the Device

Manager tab, scroll down and check for devices with yellow

exclamation markers. See Windows 95 System Information

for resolving conflicts.

• Move the Buz card to another PCI slot.

• Remove conflicting drivers.

• Try turning off System ‘Plug and Play’ options in system

BIOS.

• Check all cable connections.

• Ensure the board is correctly installed and seated properly

in the PCI slot.

• Try moving the Buz card to a different PCI slot.

• Your system may not support multifunction adapters.

Specifically, PCI to PCI bridge chips and specification for

PCI 2.1. Contact your computer system manufacturer for

possible upgrades and/or support information.

13

Troubleshooting

왎 NOTE: Buz Multimedia Producer is a technologically sophisticated package. Ensure your

system has the latest video and audio drivers installed. It is recommended that you optimize

your hard drive using Windows 95 system tools such as Scan Disk and Disk Defragmenter and

before installation, disable all system crash recovery, anti-virus software, or other background-

running software. For more troubleshooting information see Iomega’s web site:

www.iomega.com. 왎

Problem Possible Solutions

• The Audio Compression and Video Compression of

Windows 95 are not installed on the computer. Select Add/

Remove Programs from Windows 95 Control Panel, select

Windows Setup tab, select Multimedia. Follow the screen

instructions. (You may need Windows 95 install disks or

CD.)

• Click the ‘Don’t ask this question again’, check box. Click

No.

• Ensure the Buz card is correctly installed and seated

properly in the PCI slot.

• Check all connections.

• Reset your screen settings: From the Windows 95 Control

Panel, select the Display icon. Select Settings. Change the

font from large to small or small to large, then reboot your

system.

• Ensure the board is correctly installed and seated properly

in the PCI slot.

• Check all connections.

• Check for “PCI SCSI Bus Controller” or “PCI Multimedia

Video Device” under “Other Devices” in Device Manager.

If one of the above is showing, remove and reboot your

system.

• Obtain a display driver upgrade from your system

manufacturer.

• You may want to upgrade your system’s display card. The

minimum suggested specifications are: 800x600

resolution, 16 bit color and 2MB video memory.

NOTE: Even if you have tried all of the following solutions

and the preview is still choppy, the display on an output

device, such as a TV or VCR, will look good.

• If you are using S-Video, see page 10 of this guide.

• In the MGI software: Click the Start button, then Options,

then General Options, then click Buz Overlay.

• Change the Capture setting to a lower rate.

(See MGI EasyGuide for more information.)

• Close all other applications.

• Capture to a faster drive such as Iomega Jaz® 1GB or Jaz®

2GB.

4. MMSYSTEM:006 error message.

5. ActiveMovie error:

“Some of the file types usually associated with

ActiveMovie are currently associated with

other programs. Because of this, you may

be unable to play certain types of

multimedia files.”

“Do you want to fix this (by restoring the

file types to ActiveMovie) ?”

6. Error: “PCI board not found”.

7. Corrupt fonts in MGI Library.

8. Capture View Screen in MGI software is

not working.

9. Poor or choppy video in MGI’s view

screen.

• No picture, sound only

14

Possible SolutionsProblem

• Reset your screen settings: From the Windows 95 Control

Panel, select the Display icon. Select Settings. The Color

Palette must be: High Color (16 bit). Reboot your system.

• Advanced graphic settings are available on some systems.

To change your advanced graphic settings: In the Windows

95 Control Panel, select System, then click on the

Performance tab. From the Performance window, click on

the Graphics option. In the Advanced Graphics window,

move the slider to a lower setting or ‘none’. Reboot your

system. Try various settings.

• Move the Buz card to another PCI slot. Refer to the Buz

card install section of this booklet.

• Reset your screen settings: From the Windows 95 Control

Panel, select the Display icon. Select Settings. The Color

Palette must be High Color (16 bit). Reboot your system.

• Reboot your system.

• Change audio frequency from within MGI by selecting

the Options window, click Capture Driver tab, change the

audio to 22.05 kHz stereo, 16 bit or another lower setting.

• Ensure the board is correctly installed and seated properly

in the PCI slot.

• Check all connections.

• See the Audio Settings in this Booklet (Page 8).

• Lower your video quality setting.

9. Poor or choppy video in MGI’s view

screen.

• No picture, sound only

10. Message says: ‘Current display settings

are not suitable for video overlay.

Preview mode will be enabled.’

11. “Out of Wave Buffer” message when

capturing video.

12. Audio is not captured with video or

audio is not heard during capture.

13. Error: “Audio data was lost during

capture, reduce capture rate”.

15

왎 NOTE: Some computer systems have hardware that does not meet industry standard

specifications. You may choose to replace, remove or disable those components. You may

want to check with your system’s manufacturer for standard compliance to PCI specification

2.1 and for support for PCI to PCI bridge chips, to gain full Buz functionality. 왎

How to Get Help

Iomega is committed to providing a first class technical support service. To meet this goal, we offer a variety of

support options designed to meet the needs of a wide range of users including a 24-hour Technical Support Service.

Automated Technical Support 24 hours a day

By

phone via the Automated Customer Support System (ACSS) +353-1-8075-050

This interactive troubleshooting system works just like a “live” technical support agent. By answering a series of

questions via the keypad of your touch tone telephone, this system will help you perform a diagnosis of the

problem and provide you with a solution over the phone or by fax 24 hours a day, 7 days a week. Dial +353-1-

8075-050 directly or call Technical Support and choose to transfer to this system from the menu.

By

fax via the FaxBack service +353-1-8075-060

FaxBack is a simple to use automated fax help system that contains a wealth of technical information on all

Iomega products. To solve your problem immediately, simply dial the above number with your touch tone

telephone and order a catalogue listing the FaxBack documents available for your Iomega product e.g. the Zip®

or Jaz® catalogue or a document listed in these catalogues. This service is available 24 hours a day, 7 days a

week.

By e-mail via the Automated E-mail Response System

Like the FaxBack, our 24 hour automated e-mail response system will

e-mail you our wealth of technical

documentation on all Iomega products. Just send an e-mail to

[email protected] with the word

“introduction” in the subject header.

Note: This is an automated reply, there is no human interaction.

By

internet via the Iomega Website http://www.iomega.com

From our new localised European Websites you can now:

Download Technical Support documents from our HTML document library in your language

View and print Iomega manuals and installation guides from our PDF library. All you need to view and print

these files is the Acrobat Reader which is availabe from Adobe’s Website : http://www.adobe.com.

Download latest drivers and software in various languages from our FTP site.

Drivers/Software Download Services

Bulletin Board System +353-1-8075-080 (IRL) or +49-2957-792990 (D)

To dial into the Iomega BBS simply set your modems’ communication parameters to 8 bits, no parity, and one

stop bit and dial either of our 2 Bulletin Board numbers +353-1-8075-080 (Ireland) or +49-02957-792990

(Germany) with your modem software or your operating systems’ communication software such as

HyperTerminal in Windows 95.

Latest drivers and upgrades - download the latest software upgrades and drivers from our BBS. At the Main

Menu choose “F” for file menu and then “L” for list all files.

Technical Information – choose “T” at the Main Menu to go to our library of technical information on all

Iomega products.

16

Iomega Website http://www.iomega.com

Download the latest drivers and software in your language from our Website

European Technical Support

When contacting Iomega Technical Support, please have the serial number of your drive ready.

Turboline Technical Support Numbers

(These calls do incur a toll but receive priority in our call queuing system)

Austria +353-1-8075-132 Portugal +353-1-8075-142

Belgium +353-1-8075-137 Spain +353-1-8075-141

Denmark +353-1-8075-145 Switzerland +353-1-8075-131 (German)

France +353-1-8075-136 Switzerland +353-1-8075-138 (French)

Finland +353-1-8075-148 Switzerland +353-1-8075-144 (Italian)

Germany +353-1-8075-130 Sweden +353-1-8075-147

Greece +353-1-8075-149 South Africa +353-1-8075-134

Ireland +353-1-8075-135 UK +353-1-8075-133

Italy +353-1-8075-143 Poland +353-1-8075-182

Luxembourg +353-1-8075-139 Russia +353-1-8075-190

Netherlands +353-1-8075-140 International +353-1-8075-170

Norway +353-1-8075-146

Freephone Technical Support Numbers

Austria 0660-5541 Norway 800-11677

Belgium 08007-1219 Poland 00800-353-1201

Denmark 8001-8860 Portugal 05055-3003

France 0800-916051 Spain 900-99-3538

Finland 08001-13501 Switzerland 0800-558091 (German)

Germany 0130-829446 Switzerland 0800-552447 (French)

Greece 00800-353-12001 Switzerland 0800-552446 (Italian)

Ireland 1800-688-500 Sweden 020-793128

Italy 1678-77476 South Africa 0800-99-42-18

Luxembourg 0800-2009 U.K. 0800-973194

Netherlands 0800-022-2861

Product Repair or Return

Please call Iomega Technical Support for information on returning your Iomega product for repair.

17

Regulatory Agency Statements

United States FCC Information

The computer equipment described in this installation guide generates and uses radio frequency (RF)

energy. If the equipment is not installed and operated in strict accordance with the manufacturer’s

instructions, interference to radio and television reception may result.

왎 Interferene This equipment complies with Part 15 of the FCC Rules and its operation is subject to the

following conditions: (1) the equipment may not cause harmful interference, and (2) the equipment must

accept any interference received, including interference that may cause undesired operation. 왎

Part 15, Class B, of the FCC Rules, is designed to provide reasonable protection against radio and

television interference in a residential installation. Although the equipment has been tested and found to

comply with allowed RF emission limits, as specified in the above cited Rules, there is no guarantee that

interference will not occur in a particular situation. Interference can be determined by turning the

equipment off and on while monitoring radio or television reception. The user may be able to eliminate

any interference by implementing one or more of the following measures:

• Reorient the affected device and/or its receiving antenna.

• Increase the distance between the affected device and the computer equipment.

• Plug the computer and its peripherals into a different branch circuit from that used by the

affected device.

WARNING Only the manufacturer’s cable or an equivalent double shielded, host interface cable should be

used with external subsystems. Other types of cables may violate FCC rules and regulations. Also, changes or

modifications to the electronics or enclosure of this product must be expressly approved by Iomega; otherwise,

the user’s authority to operate the equipment may be voided by the FCC.

왎

FCC Declaration of Conformity

The Buz Multimedia Producer PCI card has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC rules. Model: Buz. Manufacturer’s Name: Iomega

Corporation. Manufacturer’s Address: 1821 West Iomega Way, Roy, Utah, USA 84067. Manufacturer’s

Telephone Number: (801) 778-1000. Responsible Party: John Glavin.

Canadian DOC Information

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital devices as set

out in the Radio Interference Regulations of the Canadian Department of Communications.

Declaration of Conformity

The Buz Multimedia Producer is CE certified and conforms to the following Directive(s) and Standard(s):

Application of Council Directive(s): 89/336/EEC. Standard(s) to which Conformity is Declared: EN

55022, EN 50082-1. Manufacturer’s Name: Iomega Corporation. Manufacturer’s Address: 1821 West

Iomega Way, Roy, Utah, USA 84067. Importer’s Name: Iomega Netherlands branch of Iomega

International S.A. Type of Equipment: Multimedia Producer. Model No.: BUZ. Netherlands branch of

Iomega International S.A

Legal Basics

Photographs, artwork, recordings and videos created by others, including material from the Internet,

television/radio broadcasts, and any other media, are generally covered by copyright and other laws.

Whenever you use content which you did not create, or any recording of a person other than yourself, get

permission from the copyright owner of the material or the person you have recorded. Failure to get

permission could put you at risk of copyright infringement or other liability.

18

La page est en cours de chargement...

Iomega Buz Installation and User Manual

Iomega Buz Installation and User Manual

dans d''autres langues

Documents connexes

Autres documents