Nuvo NVP5200NA Mode d'emploi

Taper
Mode d'emploi

Ce manuel convient également à

Player P5050, P5100, and P5200
Product Manual
P5200
P5100
P5050
2
Player Portfolio Audio System | Product Manual
TABLE OF CONTENTS
Quick Links . . . . . . . . . . . . . . . . . . . . 3
Overview . . . . . . . . . . . . . . . . . . . . . 4
The Nuvo Player Portfolio Audio System . . . . . . . . 4
Product Features. . . . . . . . . . . . . . . . .5
NV-P5050-xx 3-Zone Player (Ethernet) . . . . . . . . . 5
NV-P5100-xx 3-Zone Player (Ethernet) . . . . . . . . . 6
NV-P5200-xx 3-Zone Player (Ethernet) . . . . . . . . . 7
Setup and Installation . . . . . . . . . . . . . . 8
Network Requirements . . . . . . . . . . . . . . . . . 8
Installing the NV-P5050-xx, NV-P5100-xx,
andNV-P5200-xxPlayers . . . . . . . . . . . . . . . . 8
Connecting Speakers to the NV-P5050-xx,
NV-P5100-xx, and NV-P5200-xxPlayers . . . . . . . . 8
Setting Up Your System Using the App. . . . .9
New System Setup . . . . . . . . . . . . . . . . . . . .9
Using the Nuvo Player App . . . . . . . . . . 11
The Dashboard . . . . . . . . . . . . . . . . . . . . . 11
Music Selection . . . . . . . . . . . . . . . . . . . . . 11
Direct Stream . . . . . . . . . . . . . . . . . . . . . . 12
Line In . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Media Servers. . . . . . . . . . . . . . . . . . . . . . 13
The Settings Menu . . . . . . . . . . . . . . . 14
Add a Nuvo Component . . . . . . . . . . . . . . . . 14
Zones . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Keypads . . . . . . . . . . . . . . . . . . . . . . . . . 15
This App . . . . . . . . . . . . . . . . . . . . . . . . . 16
Music Library . . . . . . . . . . . . . . . . . . . . . . 16
Music Services . . . . . . . . . . . . . . . . . . . . . 17
General . . . . . . . . . . . . . . . . . . . . . . . . . 17
International . . . . . . . . . . . . . . . . . . . . . . 18
Help . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
The Music Share Software . . . . . . . . . . 19
Troubleshooting . . . . . . . . . . . . . . . . 21
Front Panel LEDs . . . . . . . . . . . . . . . . . . . . 21
Not Connected . . . . . . . . . . . . . . . . . . . . . 21
Amazon Alexa Voice Control Integration. . . 23
Prerequisites . . . . . . . . . . . . . . . . . . . . . . 23
Connecting Alexa to Your Legrand Nuvo Player . . . 23
Setup Additional Music Service Providers. . . . . . . 26
Supported Alexa Commands . . . . . . . . . . . . . 26
Specifications. . . . . . . . . . . . . . . . . . 27
iOS and Android Requirements . . . . . . . . . . . . 27
NV-P5050-xx Amplifier . . . . . . . . . . . . . . . . . 27
NV-P5100-xx Amplifier . . . . . . . . . . . . . . . . . 28
NV-P5200-xx Amplifier . . . . . . . . . . . . . . . . . 29
Regulatory Compliance . . . . . . . . . . . . 30
3
Player Portfolio Audio System | Product Manual
QUICK LINKS
GENERAL
What is the Nuvo Player Portfolio System?
Where can I can I find more information on my Nuvo
Player?
The LED on my Player is flashing. What does that
mean?
Does my Player have international options?
NUVO P5050, P5100, AND
P5200 WIRED PLAYERS
What is the difference between the P5050, P5100,
and P5200 players?
Are there specific network requirements?
How do I set up my Nuvo Player?
Can I connect speakers to my Nuvo Player?
Where do I find the specifications for my Nuvo
Player?
NUVO PLAYER APP
How do I download the Nuvo Player app?
How do I use my Nuvo Player app?
What play options does my app offer?
SETTINGS MENU
What do all of the options on the settings menu do?
What is a zone?
How do I add a component to my system?
I didn’t register my Player during setup. How can I
register now?
STREAMED MUSIC
Can I stream music from a shared network library?
What music services can I stream?
Are there special requirements for direct
streaming?
VOICE INTEGRATION
Can I connect my Alexa device?
Are there special requirements for voice integration
with my Alexa device?
Can I set up multiple music service providers?
What commands will Alexa Support?
4
Player Portfolio Audio System | Product Manual
OVERVIEW
Welcome to the Nuvo Player Portfolio Audio System!
This system offers you the opportunity to enjoy your favorite music from any room of your home, at any time, with
simplicity of operation. Imagine playing music from your personal library or easily streaming true, high-fidelity music
from the Internet by touching a button on your Apple or Android Wi-Fi-enabled portable device. Use this guide to set
up your audio system and begin filling your home with beautiful music.
THE NUVO PLAYER PORTFOLIO AUDIO SYSTEM
(Example shows a wireless set-up method.)
Home Network
Control
Wired/Wireless
Single-Zone Players
Professional Multi-Zone
Rack-Mount Players
Tabletop Speakers
Home Theater
Internet
5
Player Portfolio Audio System | Product Manual
PRODUCT FEATURES
NVP5050XX 3ZONE PLAYER ETHERNET
FRONT PANEL
21 5 643
Item Name Description
1 Standby LED Indicator Indicates if the player is powered on.
2 Power Toggles the power on and off.
3 Zone 1 LED Indicator Indicates the status of Zone 1.
4 Zone 2 LED Indicator Indicates the status of Zone 2.
5 Zone 3 LED Indicator Indicates the status of Zone 3.
6 Zone 3 USB connection port for adding digital music files to the system music library.
ScansUSB hard drive content and automatically adds it to the library.
BACK PANEL
3 4 51 2
Item Name Description
1 Speaker Outputs* Speaker connection ports. Each zone represents an independent output.
2 Line In/Line Out* 3.5mm stereo analog line-level input/output ports. Each zone represents an
independent input.
3 USB** USB connection ports for sharing music content from a storage device. Each zone
represents an independent input.
4 Ethernet RJ45 port for a wired connection to a network router.
5 AC Universal AC power supply connection port.
* If using a video device as the source for audio output, no perceptible delay in audio occurs when a single player zone is selected. If two or more
player zones are playing the audio from the video source, an audio buffer engages that adds a delay between the audio and video source.
** Not all USB drives are supported natively by the USB port. USB drives should meet USB 2.0 requirements.
6
Player Portfolio Audio System | Product Manual
NVP5100XX 3ZONE PLAYER ETHERNET
FRONT PANEL
1 2 3 4
Item Name Description
1 Standby LED Indicator Indicates if the player is powered on.
2 Power Toggles the power on and off.
3 TFT Back-Lit Display Displays zone names, status, meta data, and networking information. Touch-capable for setup.
4 Zone 3 USB connection port for adding digital music files to the system music library. Scans USB hard
drive content and automatically adds it to the library.
BACK PANEL
4 5 6
1 2 3
Item Name Description
1 Speaker Outputs* Speaker connection ports. Each zone represents an independent output.
2 Line In/Line Out* Combination 3.5mm stereo line level and mini TOSLINK optical input/output ports. Each zone
represents an independent input/output.
3 Trigger Out 3.5mm output voltage (5 V, 20 mA) trigger for external equipment. Turns on external amp when
audio is present on zone.
4 USB** USB connection ports for sharing music content from a storage device. Each zone represents an
independent input.
5 Ethernet RJ45 port for a wired connection to a network router.
6 AC Universal AC power supply connection port.
* If using a video device as the source for audio output, no perceptible delay in audio occurs when a single player zone is selected. If two or more
player zones are playing the audio from the video source, an audio buffer engages that adds a delay between the audio and video source.
** Not all USB drives are supported natively by the USB port. USB drives should meet USB 2.0 requirements.
7
Player Portfolio Audio System | Product Manual
NVP5200XX 3ZONE PLAYER ETHERNET
FRONT PANEL
1 2 3 4
Item Name Description
1 Standby LED Indicator Indicates if the player is powered on.
2 Power Toggles the power on and off.
3 TFT Back-Lit Display Displays zone names, status, meta data, and networking information.
Touch-capable for setup.
4 Zone 3 USB connection port for adding digital music files to the system music library.
Scans USB hard drive content and automatically adds to the library.
BACK PANEL
4 5 6
1 2 3
Item Name Description
1 Speaker Outputs* Speaker connection ports. Each zone represents an independent output.
2 Line In/Line Out* Combination 3.5mm stereo line level and mini TOSLINK optical input/output ports.
Each zone represents an independent input/output.
3 Trigger Out 3.5mm output voltage (5 V, 20 mA) trigger for external equipment. Turns on external
amp when audio is present on zone.
4 USB** USB connection ports for sharing music content from a storage device. Each zone
represents an independent input.
5 Ethernet RJ45 port for a wired connection to a network router.
6 AC Universal AC power supply connection port.
* If using a video device as the source for audio output, no perceptible delay in audio occurs when a single player zone is selected. If two or more
player zones are playing the audio from the video source, an audio buffer engages that adds a delay between the audio and video source.
** Not all USB drives are supported natively by the USB port. USB drives should meet USB 2.0 requirements.
NOTE: Using multiple P5200 units in a single installation will require dedicated power. Please use one dedicated 15 amp circuit for every two P5200’s installed. The P5200
is capable of creating large amounts of output power. When the P5200 is used at high levels of output, it can generate a substantial amount of heat. The P5200 must be
installed in a manner that allows for adequate dissipation of heat. That may include allowing at least one blank space above and below the unit in a rack configuration as
well as forced-air thermal management such as rack-mounted fans. For further guidance on proper thermal management, please see https://www.middleatlantic.com/
thermal-management-white-paper.aspx.
8
Player Portfolio Audio System | Product Manual
SETUP AND INSTALLATION
NETWORK REQUIREMENTS
A live Internet connection is necessary for initial setup of your Nuvo Player Portfolio System. For wired Ethernet
connectivity, a minimum 100 MB wired network is necessary for proper communication. Wireless-compatible devices
use dual band 802.11n wireless communication. To ensure that all components are compatible and communicating
correctly, it is strongly suggested that network routers using the older 802.11g protocol be upgraded to support
Multicast and UPnP and be Wi-Fi
®
Certified before you proceed with the setup.
When using an Ethernet connection to the system router, or for initial setup, make a connection from your home
network to one Ethernet port ( ) on the device, using a standard Ethernet cable.
INSTALLING THE NVP5050XX, NVP5100XX, ANDNVP5200XXPLAYERS
Connect your rack-mount player to your network by inserting one end of a standard Ethernet cable into an Ethernet
port on the player and use the other end to connect directly to your home network.
IMPORTANT: The NV-P5050-XX, NV-P5100-XX, andNV-P5200-XX are not wireless devices and do not use Wi-Fi for communication.
CONNECTING SPEAKERS TO THE NVP5050XX, NVP5100XX, AND NVP5200XXPLAYERS
NOTE: Speakers can be bookshelf, floor-standing, or installed in the wall or ceiling. 16-gauge speaker wire is recommended. Up to 12-gauge speaker wire can be used, if desired.
The rack-mount players have three separate zone “euro” style speaker connectors that use a modular plug. To
connect the speakers, perform the following steps:
1. Strip approximately 1/4 inch of insulation from the inner conductor wire.
2. Terminate the speaker wire into the modular plug.
3. Insert the plug into the appropriate zone output on the back panel (See Figure 1).
IMPORTANT: Be careful not to let the exposed speaker wires touch. This will short the connection and could damage the amplifier.
IMPEDANCE:
POWER:
8
2x50W
4
2x100W
(per zone)
1/4 in.
(6.4 mm)
Figure 1
9
Player Portfolio Audio System | Product Manual
SETTING UP YOUR SYSTEM USING THE APP
Once you have connected your system to the local network, you are ready to begin adding components in their desired
locations, naming those locations for local control, and creating your multi-zone music system. The process is easily
done from a compatible mobile device using the Nuvo Player app.
NEW SYSTEM SETUP
The Nuvo Player system is multi-lingual. Upon setting up a new system, the app automatically uses the default
language of your device. Once the system is setup up, if another language is desired, go to settings > international >
language and select another language.
Perform the following steps to set up your system:
Figure 2 Figure 3 Figure 4 Figure 5 Figure 6
1. Confirm that the component is powered on and has an Ethernet connection to the same network as the mobile
device that will be running the Nuvo Player app.
2. Download the Nuvo Player app to a mobile device connected to your home network. The app is available on the
App Store or on Google Play.
NOTE: Google Play and the Google Play logo are trademarks of Google LLC. App Store is a service mark of Apple Inc., registered in the U.S. and other countries.
3. Select Set up my new system (See Figure 2).
NOTE: Control my system is used to connect a new mobile device to an existing system.
4. Select your location and press Next (See Figure 3).
5. Select Player as the component (See Figure 4).
6. Select the Multi-Zone Player option (See Figure 5).
7. Confirm that the component is powered on and has an Ethernet connection to the same network as the mobile
device running the Nuvo Player app (See Figure 6).
NOTE: The status LED on the Player is solid green. For the NV-P5100-XX and NV-P5200-XX, the display shows a “not configured” message.
10
Player Portfolio Audio System | Product Manual
Figure 7 Figure 8 Figure 9 Figure 10
8. Add a zone (See Figure 7).
For the NV-P5050-XX players: Press the Setup button for the zone.
For NV-P5100-XX and NV-P5200-XX players: Tap the display, then choose a zone. Select Connect.
0. The component shows as connected. Press Next to continue (See Figure 8). The status LED on the component
illuminates a solid white.
a. Choose a name and icon for the zone, then press Next (See Figure 9).
NOTE: A name can be later edited by selecting Edit Name from the bottom of the app screen.
b. Select Add Another Zone and follow the instructions, or choose Finish Setup (See Figure 10).
IMPORTANT: Do not select Finish Setup until all of the zones have been added.
Figure 11 Figure 12
c. Finish Setup brings up the REGISTRATION screen (See Figure 11). Choose one of the following options:
Complete the product registration form and select Register.
Select Later to register the product at a later date (See ”General” on page 17 for more detail).
d. Once a registration option is chosen, the screen displays Setup Complete! (See Figure 12). Select Finish and the
app jumps to the HOME screen.
NOTE: A software update may be necessary for any Nuvo components. If prompted with an update, select Continue to update the firmware.
11
Player Portfolio Audio System | Product Manual
USING THE NUVO PLAYER APP
The Nuvo Player app offers wireless system control from any Wi-Fi-enabled mobile device. The Nuvo Player app is
available on the App Store or on Google Play. Both versions offer the same look and control options. When used with
tablets, the display is optimized for a view of the complete system’s operation on one screen.
THE DASHBOARD
System control begins with the Dashboard. Each available zone is represented by an icon. To make a music selection,
drag and drop a zone into a zone group, or simply tap an inactive zone to activate the zone. Once your music selection
is made, the related album art and Now Playing information appears in the zone group. Play music on an individual
zone or share music across zones by dragging and dropping multiple zones into a single group. To deactivate a zone
and stop the music playback in that zone, drag the icon into the open dashboard area below the zone groups (See
Figure 13 & Figure 14).
Figure 13 Figure 14
MUSIC SELECTION
When a zone group is activated (See Figure 14), the app jumps to the music navigation pane (See Figure 15). From
there, any of the available streaming services (See Figure 16), personal music libraries (See Figure 17), Bluetooth
®
(See Figure 18), Direct Stream, local Line-in sources (See Figure 19), or media servers can be selected for playback.
The available music choices are visible in a music selection ribbon at the bottom of the screen (See Figure 15). As you
scroll across the selections using your finger, the current service highlights and the display changes accordingly.
Figure 15 Figure 16 Figure 17 Figure 18 Figure 19
12
Player Portfolio Audio System | Product Manual
DIRECT STREAM
If audio files such as MP3, AAC, FLAC, or other audio files are on the mobile device running the app, they can be
streamed directly to a zone by selecting the This <Device> icon. When This <Device> has been selected, all music
playable by the device is cataloged and listed in categories such as Artists, Albums, Tracks, Playlists, etc., similar
to what is presented when using the Library Source (See Figure 15). Select the desired function from the app music
selection ribbon. Once you initiate a source, the Grouping, Volume, Transport, Mute, and More options function as
when listening to other sources.
DIRECT STREAMING REQUIREMENTS:
A device with the Nuvo Player app 1.8 or greater loaded.
Firmware version 1.8 or greater on the Nuvo component.
A device connected to the same network as the Nuvo component.
OPERATION NOTES:
Once a device is direct streaming to a zone, other zones can join the same zone for listening but content cannot be
selected.
Additional zones have transport control.
Local joined zones have volume and mute control, as well as the ability to leave the group.
The number of devices used in a system can’t exceed the number of zones available. A four-zone system can have
a maximum of four devices connected and streaming simultaneously. A sixteen-zone system can support up to
sixteen devices.
Direct stream supports most device file formats.
LINE IN
Each component has a 3.5 mm stereo audio line in on the back panel. This input allows any compatible analog music
device to be plugged-in and added to the system as an additional source input. To do this, connect a 3.5 mm stereo
audio cable from the audio output on the compatible analog music device into the line in port on the back of the Nuvo
component “Product Features” on page 5 for the port location.
When a line-in music device is connected, select Line In from the app music selection ribbon. The device appears
on the LINE IN menu and is available for selection from any zone (See Figure 20). Once connected, the app switches
to the music menu and music content is controlled from the app on the connected mobile device (See Figure 21). A
“Rename” utility is available by touching the ... option next to the Line Input, which allows a specific name to be given
to the music device in the app.
Figure 20 Figure 21
13
Player Portfolio Audio System | Product Manual
MEDIA SERVERS
This music streaming service is for DLNA/UPnP media servers on a local network. It is an alternative option to a
Windows share when users have a local library to share. Devices include NAS drives, Windows machines, Mac OS
machines with additional software, etc. This option provides a faster browsing and refresh experience for larger
libraries.
There are a variety of potential router/computer/device-specific needs, so be sure to choose a compatible device. Open
your app, select Media Servers, and choose your content sorting option. (See Figure 22).
Figure 22
14
Player Portfolio Audio System | Product Manual
THE SETTINGS MENU
The SETTINGS menu has several selections important to the control and operation of your system. Press the (gear
icon) located at the bottom of the DASHBOARD (See Figure 23) to access the SETTINGS menu (See Figure 24). On
smaller format devices, if you are on the Now Playing screen or browsing musical selections (See Figure 25), the
(home icon) at the top of the screen returns the app to the DASHBOARD. From there, touch to access the SETTINGS
menu.
Figure 23 Figure 24 Figure 25
ADD A NUVO COMPONENT
When adding a component to an existing system, navigate to the SETTINGS menu, then select Add a Nuvo Component
(See Figure 26). Choose your component (See Figure 27), then follow the steps in “New System Setup” on page 9.
Figure 26 Figure 27
ZONES
Selecting Zones in the SETTINGS menu provides several controls for audio playback and functionality. When the
Zones button is touched (See Figure 28), the app displays the available zones within the system (See Figure 29). When
a zone is selected, individual settings and controls are available (See Figure 30).
15
Player Portfolio Audio System | Product Manual
Figure 28 Figure 29 Figure 30 Figure 31
The ZONE SETTINGS screen contains simple slider adjustments or on/off choices that control the sound for the
selected zone.
Bass, Treble, and Balance: These three sliders offer individual control of each sound setting.
Loudness: This toggle switch provides bass boost designed for low-volume listening.
Fixed Volume Line Out: Each of the components has an individual audio line out. This feature allows the audio
output of the zone to supply to an additional amplifier, sub-woofer, or even headphones. By default, this feature is
set to off and the volume level of the output adjusts according to the volume setting set from the app. For some
uses, a fixed output volume level is required. For those instances, turn the feature on.
Mono: When this feature is turned on, it sums the individual left and right stereo outputs into a single identical
audio output for each of the speaker terminals. This is useful when a single mono speaker provides all stereo
audio content to a zone, or if you have a large area in which both of the speakers need to be heard well at a
common listening position.
If you touch the Zone icon and name at the top of the ZONES SETTINGS screen (See Figure 30), the ZONE ICON page
appears. From there, select Edit Name to change a zone’s icon and name (See Figure 31).
KEYPADS
Selecting Keypads from the SETTINGS menu (See Figure 32) allows you to manage the keypads on your system (See
Figure 33).
Figure 32 Figure 33
16
Player Portfolio Audio System | Product Manual
THIS APP
When This App is selected, a page appears with the app’s current software version information, a Reset button that
disassociates the app from the system, and scanning options (See Figure 34 – Figure 38).
Figure 34 Figure 35 Figure 36 Figure 37 Figure 38
MUSIC LIBRARY
Existing personal music is easily shared with the entire system by plugging a USB storage device into the
USBport( ) on the back panel of any of the components. The component automatically scans the drives content
and adds it, with associated album art, to the music library.
IMPORTANT: Not all USB drives are supported natively by the USB port. USB drives should meet USB 2.0 requirements.
NOTE: Another way to add music is to use the Music Share software (See “The Music Share Software” on page 19).
Once music is added, select Music Library (See Figure 39). The MUSIC LIBRARY screen displays the number of
songs and file size of the accumulated library. It also shows the individual sources for music content (See Figure 40).
Choosing Add Share (See Figure 41) allows you to type in the network path to a directory or shared drive with music
content (See Figure 42). When a new library is added, it may take time for the content to be refreshed. The length of
time depends on the amount of content. The screen displays “Refreshing” while the files of the library are scanned.
Once the refresh is completed, the content is available for browsing and playback.
Figure 39 Figure 40 Figure 41 Figure 42
17
Player Portfolio Audio System | Product Manual
MUSIC SERVICES
When Music Services is selected (See Figure 43), the active streaming music services on the system display (See
Figure 44) along with a button for adding new services (See Figure 45). Most services require an online subscription
account. The associated user name and password for the music service account must be added under this menu
selection for the service to be active on the system.
Figure 43 Figure 44 Figure 45
NOTE: Music service availability is based on your region. The cost, functionality, and terms of subscription vary by service and are a function of the service provider.
GENERAL
When the General option is selected (See Figure 46), the screen displays four important choices for information about
the components of the system (See Figure 47).
About gives specific component information for each zone (See Figure 48).
Software Update shows any software updates available. Typically, updates automatically pop up on the app
screen and are already downloaded in the background. Select Install to update all of the zones in the system
automatically (See Figure 49).
Registration opens the product warranty registration page (See Figure 50). The opportunity to register the
product is offered at the initial setup of the sys tem. If the registration is completed at that time, this system
selection is not necessary (See Figure 50 & Figure 51).
Advanced opens the Reset System feature and the Auto Disband Inactive Groups feature (See Figure 52).
Figure 46 Figure 47 Figure 48 Figure 49
18
Player Portfolio Audio System | Product Manual
Figure 50 Figure 51 Figure 52
INTERNATIONAL
The International selection (See Figure 53), offers a Location setting (See Figure 54). When a country location is set
(See Figure 55), the legal wireless broadcast channel is set for the selected region. This is an important selection.
Language and Time Zone options are available for further customization (See Figure 56).
Figure 53 Figure 54 Figure 55 Figure 56
HELP
The Help option (See Figure 57), displays links to contact Nuvo directly, to reference information on various system
components, or to report a problem (See Figure 58–Figure 61).
Figure 57 Figure 58 Figure 59 Figure 60 Figure 61
19
Player Portfolio Audio System | Product Manual
THE MUSIC SHARE SOFTWARE
The Music Share Software allows music content from shared network locations and libraries, to be streamed from
any zone in the sys tem.
1. From your computer, go to http://www.legrand.us/resources-and-downloads/software-downloads to download
the music share software.
2. Follow the prompts for installing the software (See Figure 62).
Figure 62
3. The software connects to the network and displays a blank music share page. Choose the Add new option. The
music share choices open (See Figure 63).
Figure 63
4. The My Music folder is the default location for Windows Media Player libraries (See Figure 64). If your music is
stored on a Mac computer, or your preferred music library software is in iTunes, then select a different folder. A
progress window appears (See Figure 65).
Figure 64 Figure 65
20
Player Portfolio Audio System | Product Manual
5. You can also choose to share a specific folder or drive on the network. The A specific folder... choice opens a
browsing window (See Figure 66). From there you can choose a shared folder with music content or a drive that is
shared with the network.
Figure 66
All shared folders and drives display in the software (See Figure 67). Access the software at any time to add or remove
content.
NOTE: If you are sharing a personal library located on a personal computer hard drive, the software must be downloaded to that computer before the share is created.
Once a share directory is created, it is not necessary to keep the Music Share Software open. For the music content to
be available for music playback, the computer hosting the music content must be active on the same network as the
system.
Figure 67
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38

Nuvo NVP5200NA Mode d'emploi

Taper
Mode d'emploi
Ce manuel convient également à

dans d''autres langues