Haier HLPW028AXW Le manuel du propriétaire

Catégorie
Machines à laver
Taper
Le manuel du propriétaire
Top-Load Clothes Washer
Laveuse à chargement par le haut
Lavadora de ropa con carga superior
Installation and User Manual
Instructions d’installation et
Guide de l’utilisateur
Instrucciones de instalación y
Manual del usuario
HLPW028AXW
Designed for
High-Eciency;
use HE detergent.
Conçue pour
haute ecacité;
utiliser un
détergent HE.
Diseñada para un
alta eciencia; use
detergente HE
(Alta eciencia).
Part # 0030811644
1
TABLE OF CONTENTS
WASHER SAFETY ................................................................................................2
PARTS AND FEATURES .......................................................................................5
INSTALLATION REQUIREMENTS ......................................................................... 6
Tools Needed ................................................................................................................. 6
Parts Supplied ................................................................................................................ 6
Location Requirements ................................................................................................. 6
Drain System Requirements .........................................................................................7
Electrical Requirements ................................................................................................8
Grounding instructions .................................................................................................9
INSTALLATION INSTRUCTIONS ........................................................................ 10
Step 1 - Unpack the Washer ........................................................................................10
Step 2 - Install Bottom Cover ......................................................................................11
Step 3 - Connect and Secure the Drain Hose ............................................................13
Step 4 - Connect the Water Hoses ............................................................................. 14
Step 5 - Level the Washer ...........................................................................................15
Step 6 - Complete Installation ....................................................................................16
CONTROL PANEL AND FEATURES .................................................................... 17
WASHER USE ....................................................................................................20
Step 1 - Prepare and Sort Laundry ..............................................................................20
Step 2 - Add Fabric Care Products ..............................................................................20
Step 3 - Load the Washer ............................................................................................21
Step 4 - Start the Washer ............................................................................................ 21
WASHER CARE ..................................................................................................22
Cleaning .......................................................................................................................22
Vacationing Precautions .............................................................................................23
Moving or Storage Preparation ...................................................................................23
Reinstalling/Using Washer Again ................................................................................ 24
TROUBLESHOOTING ........................................................................................ 25
LIMITED WARRANTY ........................................................................................28
RECORD KEEPING
Thank you for purchasing this Haier
product. This user manual will help you
get the best performance from your
new washer.
For future reference, record the model
and serial number located on back of
the washer, and the date of purchase.
Staple your proof of purchase to this
manual to aid in obtaining warranty
service if needed.
___________________________________
Model number
___________________________________
Serial number
___________________________________
Date of purchase
2
WASHER SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and
on your appliance. Always read and obey all safety messages.
DANGER
WARNING
CAUTION
This is the safety alert symbol.
This symbol alerts you to potential hazards that can
kill or hurt you and others. All safety messages will
follow the safety alert symbol and either the word
“DANGER,” “WARNING” or “CAUTION.”
These words mean:
An imminently hazardous situation. You
could be killed or seriously injured if you
don’t immediately follow instructions.
A potentially hazardous situation
which, if not avoided, could result in
death or serious bodily injury.
A potentially hazardous situation
which, if not avoided, may result in
moderate or minor injury.
All safety messages will tell you what the potential hazard is, tell you
how to reduce the chance of injury, and tell you what can happen if the
instructions are not followed.
3
IMPORTANT SAFETY
INSTRUCTIONS
WARNING: To reduce the risk of re, electrical shock, injury to persons,
or damage when using the washer, follow basic precautions, including
the following:
Keep the area around
your appliance free from
combustible materials such as
lint, paper, rags or chemicals.
Close supervision is
necessary if this appliance is
used by or near children. Do
not allow children to play on,
with, or inside this appliance.
Do not place articles that
have been previously cleaned
in, washed in, soaked in, or
spotted with gasoline, dry-
cleaning solvents or other
ammable or explosive
substances in the wash water.
These substances give o
vapors that could ignite or
explode.
Do not add gasoline, dry-
cleaning solvents, or other
ammable or explosive
substances to the wash
water. These substances give
o vapors that could ignite or
explode.
Do not reach into the
appliance if the wash basket,
tub or agitator is moving.
Do not tamper with the
controls.
To minimize the possibility
of electric shock, unplug this
appliance from the power
supply before attempting any
maintenance or cleaning.
NOTE: Turning power o does
NOT disconnect the appliance
from the power supply.
Do not attempt to service,
repair or replace any part
of the appliance unless
specically recommended
in this user manual or in
published repair instructions
that you understand and have
the skills to carry out.
Before discarding or removing
from service, remove the
washer door or lid.
Read all of the instructions
before using this appliance.
Use this appliance only for
its intended purpose as
described in this user manual.
Do not use the washer for
commercial clothes washing.
4
IMPORTANT SAFETY
INSTRUCTIONS
Under certain conditions,
hydrogen gas may be
produced in a hot-water
system that has not
been used for 2 weeks or
more. HYDROGEN GAS IS
EXPLOSIVE. If the hot water
system has not been used for
such a period, before using
a washing machine, turn on
all hot-water faucets and
let the water ow from each
for several minutes. This will
release any accumulated
hydrogen gas. As the gas is
ammable, do not smoke or
use an open ame during this
time.
This appliance must be
properly installed and
located in accordance with
the installation instructions
before it is used.
Do not store or install this
appliance where it will be
exposed to temperatures
below freezing or exposed
to weather, which can cause
damage to the appliance.
The appliance must be
properly grounded to conform
with all electrical codes and
ordinances. See “Electrical
Requirements” section.
READ AND SAVE THESE
INSTRUCTIONS
WARNING
Suffocation Hazard
Before you throw away your old appliance, remove the door or lid so
that children cannot hide or get trapped inside your old appliance.
Failure to follow these instructions can result in death or brain damage.
State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals known to the
State of California to cause cancer.
WARNING: This product contains one or more chemicals known to the
State of California to cause birth defects or other reproductive harm.
5
PARTS AND FEATURES
A
B
C
D
E
F
G
M
N
O
P
I
J
H
K
L
a Top Lid
b Control Panel
c Cabinet
d Cabinet Handle
e Leveling Feet (2)
f Liquid Bleach Dispenser
g Drain Port
h Power Cord (120 Volt/ 60 Hz)
i Access Panel
j Cold Water Inlet Valve
k Hot Water Inlet Valve
l Wash Basket
m Powdered Detergent Dispenser
n Outer Tub Cover
o Balance Ring
p Lint Filter
6
INSTALLATION REQUIREMENTS
TOOLS NEEDED
Pliers
Wrench
Flat-blade Screwdriver
Measuring Tape
Carpenter’s Level
Phillips Screwdriver
PARTS SUPPLIED
Drain Hose Clamp
Drain Hose Hook
Drain Hose
Water Hoses (2)
(at washers pre-installed)
User Manual
Bottom Cover
(with screw)
LOCATION REQUIREMENTS
The washer must be installed on a solid oor to minimize vibration during the
spin cycle. A concrete oor is best.
The oor should be level with maximum slope of 1" (25 mm) under entire washer.
A suitable location is protected from direct sunlight and heat sources such as
radiators, baseboard heaters, or cooking appliances.
Do not install on carpeting.
The location must have a grounded electrical outlet located within 4 ft. (1.2 m) of
power cord on the back of the washer.
Hot and cold water faucets must be present within 3 ft. (0.9 m) of the hot and
cold connections on the washer.
A water heater must supply hot water with a temperature of at least 120°F
(49°C).
The water pressure should be between 20 and 100 psi (138 and 690 kPa).
IMPORTANT: Do not install or operate the washer where it will be exposed to
temperatures below 32°F (0°C). Water remaining in the washer will freeze and cause
damage to the washer.
7
WASHER DIMENSIONS
21²⅓₂"
(55.0 cm)
22¹⁄₁₆"
(56.0 cm)
37⅝
"
(95.6 cm)
DRAIN SYSTEM REQUIREMENTS
WALL OR FLOOR STANDPIPE
The height of the standpipe must be between 39" (99 cm) and 60" (153 cm) from the
bottom of the washer. The minimum diameter of the standpipe must be 2" (5 cm).
Wall Floor
39" – 60"
(99 cm – 153cm
)
LAUNDRY TUB
The laundry tub must have a minimum
capacity of 20 gal. (76 L). The height of the
laundry tub must be at least 39" (99 cm)
and no more than 48" (122 cm).
39" – 48"
(99 cm – 122cm)
8
ELECTRICAL REQUIREMENTS
WARNING
Electrical Shock Hazard
The washer must be connected to a properly grounded 120 volt, 60 Hz.,
AC only, 15- or 20-amp, fused electrical supply. A time-delay fuse or
circuit breaker is recommended.
Failure to do so could result in death, fire or electric shock.
If you are in doubt the electric supply provided meets the above requirements,
contact a licensed electrician.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the power cord plug.
Do not use an adapter.
Do not use an extension cord.
Failure to do so can result in death, fire or electrical shock.
A 120 volt, 60 Hz., AC only, 15- or 20-amp, fused electrical supply is required.
A time-delay fuse or circuit breaker is recommended. It is recommended that a
separate circuit breaker serving only this appliance be provided.
This washer is equipped with a power supply cord having a 3 prong grounding
plug.
To minimize possible shock hazard, the cord must be plugged into a mating,
3prong, grounding-type outlet, grounded in accordance with local codes and
ordinances. If a mating outlet is not available, it is the personal responsibility and
obligation of the customer to have the properly grounded outlet installed by a
qualied electrician.
9
If codes permit and a separate ground wire is used, it is recommended that a
qualied electrician determine that the ground path is adequate.
Do not ground to a gas pipe.
Check with a qualied electrician if you are not sure the washer is properly
grounded.
Do not have a fuse in the neutral or ground circuit.
GROUNDING INSTRUCTIONS
For a grounded, cord-connected
washer:
The washer must be grounded.
In the event of a malfunction
or breakdown, grounding will
reduce the risk of electric shock
by providing a path of least
resistance for electric current.
The washer is equipped with
a cord having an equipment-
grounding conductor and a
grounding plug. The plug must
be plugged into an appropriate
outlet that is properly installed
and grounded in accordance with
all local codes and ordinances.
WARNING: Improper connection
of the equipment-grounding
conductor can result in a risk of
electric shock.
Check with a qualied electrician
or serviceman if you are in doubt
whether the washer is properly
grounded.
Do not modify the plug provided
with the washer; if it will not t
the outlet, have a proper outlet
installed by a qualied electrician.
For a permanently connected
washer:
The washer must be connected
to a grounded metal, permanent
wiring system, or an equipment-
grounding conductor must be run
with the circuit conductors and
connected to the equipment-
grounding terminal or lead on the
washer.
10
INSTALLATION INSTRUCTIONS
We recommend that your new washer be installed by a qualied appliance
technician. If you feel that you have the skills to install the washer, please read the
installation instructions carefully before installing.
IMPORTANT:
If, after completing these steps, you are unsure that the washer is properly
installed, contact a qualied appliance technician.
If your washer was just delivered and the outside temperature was below
freezing, do not operate until the washer warms up to room temperature.
STEP 1 - UNPACK THE WASHER
WARNING
Suffocation Hazard
To avoid danger of suffocation, keep plastic bag and other packing
material away from babies and children. Do not use this bag in cribs,
carriages and playpens. The plastic bag could block nose and mouth
and prevent breathing. This bag is not a toy.
Failure to follow these instructions can result in death or brain damage.
WARNING
Excessive Weight Hazard
Use two or more people to move and install washer.
Failure to do so can result in back or other injury.
1. Remove all packing materials. This includes the foam base, molded plastic
support and all adhesive tape holding the washer accessories inside and outside.
IMPORTANT: Failure to remove the packing base will cause the washer to not
operate properly and will void your warranty.
Open the lid to access the wash basket brace. Pull up on the basket brace to
remove.
NOTE: Save the wash basket brace to use when moving the washer in the
future.
11
a
a Wash Basket Brace
Using two or more people, lift the washer o of the packing base and the
molded plastic support.
NOTE: It is possible for the plastic support, under the U bracket, to remain
attached to the bottom of the washer. Make sure it is removed with the foam
base.
b
a
a Plastic
Support
b Foam
Base
2. Inspect the washer, and remove any remnants of packaging, tape or printed
materials before using the washer.
3. Properly dispose of /recycle all packing material.
STEP 2 - INSTALL BOTTOM COVER
WARNING
Electrical Shock Hazard
Install bottom cover.
Lock all four casters prior to operating washer.
Failure to do so can result in death, electric shock or personal injury.
12
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
1. Lay folded blankets or towels on the oor to create an incline.
2. Using two or more people, lay the washer onto its side so that the top of the
washer is higher than the base, and the drain outlet is facing upward.
a
b
a Drain Outlet
b Top of Washer
3. With the side of the bottom cover that is marked FRONT/UP toward the interior
and front of the washer, align the edges of the cover with the track in the bottom
of the washer.
4. From the front of the washer, slide the bottom cover fully into the track making
sure the edges of the cover are behind the tabs.
NOTE: When the cover is completely inserted into the track behind the tabs, the
hole for the screw will be ush and aligned with the hole in the cabinet bottom.
13
a
c
b
c
a Bottom Cover
b Screw Hole
c Tabs
5. Using the screw (provided), fasten the bottom cover to the cabinet base.
6. Using two or more people, stand the washer upright.
STEP 3 - CONNECT AND SECURE THE DRAIN HOSE
1. Enlarge the opening by squeezing the
ends of the drain hose clamp together.
Slide the clamp over the end of the drain
hose, and onto the exible section of the
hose.
2. Fit the end of the drain hose over the
plastic drain port extending from the
washer.
3. Squeeze the ends of the clamp to enlarge
the opening and slide the clamp over the
connection of the drain hose and drain
port. Release the clamp to tighten.
4. Put the drain hose hook end in a drain pipe or laundry tub.
5. Secure the drain hose in place by fastening it to a water hose, the standpipe, or a
leg on the laundry tub. See “Drain System Requirements” for illustrations.
14
STEP 4 - CONNECT THE WATER HOSES
Depending on your model, the water hoses provided will be either Style 1 or Style 2.
Follow the instructions specic to the style of water hoses provided.
IMPORTANT: Only use new hoses when installing the washer. The water hoses must
have a coarse thread connectors on one end (to connect to the household water
supply), and ne thread connectors on the other end (to connect to the washing
machine).
NOTE: Periodically inspect hoses for cracks, cuts, leaks or wear. Replace with new
hoses every 5 years.
1. Check that a at washer is present and rmly in place in each end of the water
inlet hoses. Flat washers are pre-installed at the factory.
Style 1 Style 2
A
a
a Washer
2. Thread the inlet hoses onto the water faucets by hand until rmly hand
tightened.
IMPORTANT: To avoid damage to the hose couplings, do not overtighten.
NOTE: To avoid damage to the faucets do not use plumber’s tape or sealants on
the valve threads.
a Gray End Only
3. Thread the white end of the inlet hoses by hand onto the inlet valves marked “H”
(hot) and “C” (cold) on the back of the washer until snug.
IMPORTANT:
Do not connect the gray end of the inlet hose to the washer. You will damage
the threads and it will leak.
To avoid damage to the hose couplings, do not over tighten.
15
Style 1 - Using pliers, tighten the connection an additional two-thirds turn.
Style 2 - Do not use pliers to tighten the connection.
NOTE: To avoid damage to the washer inlet valves, do not use plumber’s tape or
sealants on the valve threads.
Style 1 Style 2
a a
a White End Only
4. Turn on the hot and cold water faucets and check for leaks. If there is any leaking,
check steps 1 through 3 again.
STEP 5 - LEVEL THE WASHER
IMPORTANT: Proper leveling of the washer will help reduce noise and vibration.
1. Place washer in its nal location. Check that the water and drain lines are not
strained or pinched. Make sure that all four feet are rmly in contact with the
oor and that the washer rests solidly in position.
2. Using a carpenter’s level, check to make sure the washer is level from side to
side and from front to back.
3. If the washer is not level, adjust the leveling feet. Turn clockwise to extend (raise
the washer) or counterclockwise to retract (lower the washer).
Raise Lower
16
STEP 6 - COMPLETE INSTALLATION
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the power cord plug.
Do not use an adapter.
Do not use an extension cord.
Failure to do so can result in death, fire or electrical shock.
1. Plug the washer into a grounded 3 prong outlet.
2. Check that water faucets are turned on.
3. Dispose of/recycle all packaging materials.
4. Run a normal wash cycle using detergent to test and
clean the washer. See the ”Operating Instructions”
section.
17
CONTROL PANEL AND FEATURES
CONTROL PANEL
A B C D G H
E F
WASH CYCLE BUTTON
Use this button to select the desired cycle for your wash load.
The standard default settings of each cycle will be displayed; the default
settings can be changed by using the Setting buttons - Wash Temp, Soil
Level, and Water Level.
There are 8 cycles to choose from:
Heavy Duty - Use this cycle for heavily soiled durable garments. This cycle
can also be used for towels, sports gear, children’s clothes, etc.
Whites - Use this hot water cycle for white and light colored clothing that is
susceptible to transfer of dye.
Perm Press - Use this cycle for light to normally soiled garments.
Normal - Use this cycle for normally soiled cottons and mixed fabric loads.
Delicate - Use this cycle to wash lightly soiled garments and delicate clothes
that need gentle washing.
Quick - Use this cycle to wash small, lightly soiled loads that are needed in a
hurry.
Rinse & Spin - Use this cycle for removing excess detergent and refreshing
clean garments.
Spin Only - Use this cycle to extract water from sink washed or clean wet
garments.
SETTING BUTTONS
Wash Temp Button
Use this button to select a wash temperature; all rinses use cold water. For
best results follow your garment label instructions and use the warmest
water temperature that is safe for your fabric.
Not all selections are available for all cycles.
18
Soil Level Button
Use this button to select the soil level that is most appropriate for your load.
Based on the soil level, the wash time will increase or decrease by 4-8 minute
increments in the Estimated Time Remaining Display.
There are 3 soil levels to choose from - Heavy, Normal, Light
Water Level Button
Use this button to select an appropriate water level for your load. Small is the
lowest water level and Super is the highest.
DELAY START BUTTON
Press this button to delay the start of your wash cycle between 1 - 24 hours
in one hour increments.
Use this button to select a delayed start of the washer. The number of hours
will be shown in the Estimated Time Remaining Display. Each press of the
Delay Start Button will increase the time by 1 hour.
One button press after 24 will cancel the Delay Start feature. You can also
cancel the Delay Start feature by turning o power to the washer with the
Power Button.
The Start/Pause Button must be selected to begin the countdown.
EXTRA RINSE BUTTON
Press to add an extra rinse to your wash cycle.
NOTE: Some cycles have this option as a default. See the Cycle Guide for
details.
ESTIMATED TIME REMAINING DISPLAY
The Estimated Time Remaining Display shows the estimated cycle time in
minutes.
When the Delay Start option is being used, the Estimated Time Remaining
Display will show the delay time in hours.
CYCLE STATUS INDICATORS
The Cycle Status lights indicate the stages of the selected cycle.
START/PAUSE BUTTON
Press this button to start a selected cycle or to pause an operating cycle.
NOTE: After starting the wash cycle, you must pause the operating cycle to
change the Wash Temp, Soil Level and Water Level settings.
POWER BUTTON
IMPORTANT: Switching o power with the power button does not disconnect
the appliance from the electrical supply.
Press the power button to turn on the washer.
NOTE: If the washer is turned on, but START is not pressed, the power will
automatically turn o after 5 minutes.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92

Haier HLPW028AXW Le manuel du propriétaire

Catégorie
Machines à laver
Taper
Le manuel du propriétaire