Haier HLP28E Manuel utilisateur

Top-Load Compact Clothes Washer

Laveuse à chargement par le haut

Lavadora de ropa con carga superior

User Manual

Guide de l’utilisateur

Manual del usuario

HLP28E

Designed for



use HE detergent.

Conçue pour



utiliser un



Diseñada para un



detergente HE



1

TABLE OF CONTENTS

IMPORTANT SAFETY INSTRUCTIONS ................................................................. 2

Installation Safety Precautions ..................................................................................... 2

General Safety Precautions ..........................................................................................3

PARTS AND FEATURES .......................................................................................4

INSTALLATION INSTRUCTIONS .......................................................................... 5

Tools Needed ................................................................................................................. 5

Parts Supplied ................................................................................................................ 5

Location Requirements ................................................................................................. 5

Drain System Requirements ......................................................................................... 6

Electrical Requirements ................................................................................................7

STEP BY STEP INSTRUCTIONS ............................................................................8

Step 1 - Unpack the Washer .......................................................................................... 8

Step 2 - Connect and Secure the Drain Hose ..............................................................9

Step 3 - Connect the Water Hoses ...............................................................................9

Step 4 - Level the Washer ...........................................................................................11

Step 5 - Complete Installation ....................................................................................11

CONTROL PANEL AND FEATURES .................................................................... 12

OPERATING INSTRUCTIONS ............................................................................. 15

Step 1 - Prepare and Sort Laundry ..............................................................................15

Step 2 - Add Fabric Care Products ..............................................................................16

Step 3 - Load the Washer ............................................................................................17

Step 4 - Start the Washer ............................................................................................17

CARE AND CLEANING GUIDE ............................................................................ 18

Cleaning and Maintenance .......................................................................................... 18

Vacationing Precautions .............................................................................................19

Moving or Storage Preparation ...................................................................................19

TROUBLESHOOTING ........................................................................................20

LIMITED WARRANTY ........................................................................................22

RECORD KEEPING

Thank you for purchasing this Haier

product. This user manual will help you

get the best performance from your

new washer.

For future reference, record the model

and serial number located on back of

the washer, and the date of purchase.

Staple your proof of purchase to this

manual to aid in obtaining warranty

service if needed.

___________________________________

Model number

___________________________________

Serial number

___________________________________

Date of purchase

2

IMPORTANT SAFETY INSTRUCTIONS

WARNING

To reduce the risk of ﬁre, electric shock, or injury to persons when using

your appliance, follow the basic precautions, including the following:



Read all of the instructions before using this appliance.



Use this appliance only for its intended purpose as described in this user

manual.



Do not use the washer for commercial clothes washing.



Under certain conditions, hydrogen gas may be produced in a hot-water

system that has not been used for 2 weeks or more. HYDROGEN GAS

IS EXPLOSIVE. If the hot water system has not been used for such a

period, before using a washing machine, turn on all hot-water faucets

and let the water ow from each for several minutes. This will release

any accumulated hydrogen gas. As the gas is ammable, do not smoke

or use an open ame during this time.

INSTALLATION SAFETY PRECAUTIONS

DANGER

Before you throw away your old appliance, remove the door or lid so

that children cannot hide or get trapped inside your old appliance.



This appliance must be properly installed and located in accordance with

the installation instructions before it is used.



Do not store or install this appliance where it will be exposed to

temperatures below freezing or exposed to weather, which can cause

damage to the appliance.



The appliance must be properly grounded to conform with all electrical

codes and ordinances. See “Electrical Requirements” section.

3

GENERAL SAFETY PRECAUTIONS



Keep the area around your appliance free from combustible materials

such as lint, paper, rags or chemicals.



Close supervision is necessary if this appliance is used by or near

children. Do not allow children to play on, with, or inside this appliance.



Do not place articles that have been previously cleaned in, washed in,

soaked in, or spotted with gasoline, dry-cleaning solvents or other

ammable or explosive substances in the wash water. These substances

give o vapors that could ignite or explode.



Do not add gasoline, dry-cleaning solvents, or other ammable or

explosive substances to the wash water. These substances give o

vapors that could ignite or explode.



Do not reach into the appliance if the wash basket, tub or agitator is

moving.



Do not tamper with the controls.



Never unplug your washer by pulling on the power cord. Always grasp

the plug rmly and pull straight out from the outlet.



To minimize the possibility of electric shock, unplug this appliance from

the power supply before attempting any maintenance or cleaning.

NOTE: Turning the cycle selector knob to the “O” position does NOT

disconnect the appliance from the power supply.



Do not attempt to service, repair or replace any part of the appliance

unless specically recommended in this user manual or in published

repair instructions that you understand and have the skills to carry out.



Before discarding or removing from service, remove the washer door or

lid.

SAVE THESE INSTRUCTIONS

HOUSEHOLD USE ONLY

4

PARTS AND FEATURES

A

B

C

D

E

F

G

M

N

O

P

I

J

H

K

L

Top Lid

Control Panel

Cabinet

Cabinet Handle

Leveling Feet (2)

Liquid Beach Dispenser

Drain Port

Power Cord (120 Volt/ 60 Hz)

Access Panel

Cold Water Inlet Value

Hot Water Inlet Value

Wash Basket

Powdered Detergent Dispenser

Outer Tub Cover

Balance Ring

Lint Filter

5

INSTALLATION INSTRUCTIONS

TOOLS NEEDED



Pliers



Wrench



Flat-blade Screwdriver



Measuring Tape



Carpenter’s Level

PARTS SUPPLIED



Drain Hose Clamp



Drain Hose Hook



Drain Hose



Water Hoses (2)

(at washers pre-installed)



User Manual

LOCATION REQUIREMENTS



The washer must be installed on a solid oor to minimize vibration during the

spin cycle. A concrete oor is best.



The oor should be level with maximum slope of 1" (25 mm) under entire washer.



A suitable location is protected from direct sunlight and heat sources such as

radiators, baseboard heaters, or cooking appliances.



Do not install on carpeting.



The location must have a grounded electrical outlet located within 4 ft. (1.2 m) of

power cord on the back of the washer.



Hot and cold water faucets must be present within 3 ft. (0.9 m) of the hot and

cold connections on the washer.



A water heater must supply hot water with a temperature of at least 120°F

(49°C).



The water pressure should be between 20 and 100 psi (138 and 690 kPa).

WARNING

Do not install or operate the washer where it will be exposed to

temperatures below 32°F (0°C). Water remaining in the washer will

freeze and cause damage to the washer.

6

WASHER DIMENSIONS

21²⅓₂"

(55.0 cm)

22¹⁄₁₆

"

(56.0 cm)

37⅝

"

(95.6 cm)

DRAIN SYSTEM REQUIREMENTS

WALL OR FLOOR STANDPIPE

The height of the standpipe must be between 39" (99 cm) and 60" (153 cm) from the

bottom of the washer. The minimum diameter of the standpipe must be 2" (5 cm).

Wall Floor

39" – 60"

(99 cm – 153cm)

7

LAUNDRY TUB

The laundry tub must have a minimum

capacity of 20 gal. (76 L). The height of the

laundry tub must be at least 39" (99 cm)

and no more than 48" (122 cm).

39" – 48"

(99 cm – 122cm)

ELECTRICAL REQUIREMENTS

WARNING

The washer must be connected to a properly grounded 120 volt, 60 Hz.,

AC only, 15- or 20-amp, fused electrical supply. A time-delay fuse or

circuit breaker is recommended.



If the electric supply provided does not meet the above requirements, contact a

licensed electrician.

WARNING

Improper connection of the equipment-grounding conductor can result

in a risk of electric shock. Check with a qualiﬁed electrician or

serviceman if you are in doubt as to whether the appliance is properly

grounded.



This appliance must be grounded. In the event of malfunction or breakdown,

grounding will reduce the risk of electric shock by providing a path of least

resistance for electric current.



This appliance is equipped with a cord having an equipment-grounding

conductor and a grounding plug. The plug must be plugged into an appropriate

outlet that is properly installed and grounded in accordance with all local codes

and ordinances.



Do not use a 3 prong plug adapter.



Do not use an extension cord.

8

STEP BY STEP INSTRUCTIONS

INSTALLING YOUR WASHER

We recommend that your new washer be installed by a qualied appliance

technician. If you feel that you have the skills to install the washer, please read the

installation instructions carefully before installing.

CAUTION: If, after completing these steps, you are unsure that the washer is

properly installed, contact a qualied appliance technician.

WARNING

If your washer was just delivered and the outside temperature was

below freezing, do not operate until the washer warms up to room

temperature.

STEP 1 - UNPACK THE WASHER

1. Remove all packing materials. This includes the foam base and all adhesive tape

holding the washer accessories inside and outside.

2. Open the top lid to remove the wash basket brace. Pull to remove.

NOTE: Save the wash basket brace to use when moving the washer in the future.

3. Inspect and remove any remains of packing, tape or printed materials before

using the washer.

WARNING

To avoid danger of suﬀocation, keep plastic bag and other packing

material away from babies and children. Do not use this bag in cribs,

carriages and playpens. The plastic bag could block nose and mouth

and prevent breathing. This bag is not a toy.

9

STEP 2 - CONNECT AND SECURE THE DRAIN HOSE

1. Enlarge the opening by squeezing the

ends of the drain hose clamp together.

Slide the clamp over the end of the drain

hose, and onto the exible section of the

hose.

2. Fit the end of the drain hose over the

plastic drain port extending from the

washer.

3. Squeeze the ends of the clamp to enlarge

the opening and slide the clamp over the

connection of the drain hose and drain

port. Release the clamp to tighten.

4. Put the drain hose hook end in a drain pipe or laundry tub.

5. Secure the drain hose in place by fastening it to a water hose, the standpipe, or a

leg on the laundry tub. See “Drain System Requirements” for illustrations.

STEP 3 - CONNECT THE WATER HOSES

IMPORTANT: Only use new hoses when installing the washer.

NOTE: Periodically inspect hoses for cracks, cuts, leaks or wear. Replace with new

hoses every 5 years.

NOTE: Hot water needs to be set at a temperature of at least 120ºF - 140ºF. (49ºC-

60ºC) for the soap to dissolve and to avoid soap residue remaining on clothes.

1. Check that a at washer is present and rmly in place in each end of the water

inlet hoses. Flat washers are pre-installed at the factory.

A

Washer

10

2. The hose couplers are color coded to assist you in making the proper

connections. You may want to use gray for cold and red for hot. Thread the inlet

hoses onto the water faucets by hand until snug. Then using pliers, tighten an

additional two-thirds turn.

IMPORTANT: To avoid damage to the hose couplings, do not overtighten.

NOTE: To avoid damage to the faucets do not use plumber’s tape or sealants on

the valve threads.

3. Thread the other end of the inlet hoses by hand onto the inlet valves marked

“H” (hot) and “C” (cold) on the back of the washer until snug. Then using pliers,

tighten an additional two-thirds turn.

IMPORTANT: To avoid damage to the hose couplings, do not overtighten.

NOTE: To avoid damage to the washer inlet valves, do not use plumber’s tape or

sealants on the valve threads.

4. Turn on the hot and cold water faucets and check for leaks. If there is any leaking,

check steps 1 through 3 again.

11

STEP 4 - LEVEL THE WASHER

IMPORTANT: Proper leveling of the washer will help reduce noise and vibration.

1. Place washer in its nal location. Check that the water and drain lines are not

strained or pinched. Make sure that all four feet are rmly in contact with the

oor and that the washer rests solidly in position.

2. Using a carpenter’s level, check to make sure the washer is level from side to

side and from front to back.

3. If the washer is not level, adjust the leveling feet. Turn clockwise to extend (raise

the washer) or counterclockwise to retract (lower the washer).

Raise Lower

STEP 5 - COMPLETE INSTALLATION

1. Plug the washer into a grounded 3 prong outlet.

2. Check that water faucets are turned on.

3. Dispose of/recycle all packaging materials.

4. Run a normal wash cycle using detergent to test and

clean the washer. See the ”Operating Instructions”

section.

12

CONTROL PANEL AND FEATURES

CONTROL PANEL

A B C D G H

E F

WASH CYCLE BUTTON



Use this button to select the desired cycle for your wash load.



The standard default settings of each cycle will be displayed; the default

settings can be changed by using the Setting buttons - Wash Temp, Soil

Level, and Water Level.



There are 8 cycles to choose from:

 Use this cycle for heavily soiled durable garments. This cycle

can also be used for towels, sports gear, children’s clothes, etc.

Whites - Use this hot water cycle for white and light colored clothing that is

susceptible to transfer of dye.

Perm Press - Use this cycle for light to normally soiled garments.

Normal - Use this cycle for normally soiled cottons and mixed fabric loads.

Delicate - Use this cycle to wash lightly soiled garments and delicate clothes

that need gentle washing.

Quick - Use this cycle to wash small, lightly soiled loads that are needed in a

hurry.

Rinse & Spin - Use this cycle for removing excess detergent and refreshing

clean garments.

 Use this cycle to extract water from sink washed or clean wet

garments.

SETTING BUTTONS

Wash Temp Button



Use this button to select a wash temperature; all rinses use cold water. For

best results follow your garment label instructions and use the warmest

water temperature that is safe for your fabric.



Not all selections are available for all cycles.

13

Soil Level Button



Use this button to select the soil level that is most appropriate for your

load. Based on the soil level, the wash time will increase or decrease by 4-8

minute increments in the Estimated Time Remaining Display.



There are 3 soil levels to choose from - Heavy, Normal, Light

Water Level Button



Use this button to select an appropriate water level for your load. Small is

the lowest water level and Super is the highest.

DELAY START BUTTON



Press this button to delay the start of your wash cycle between 1 - 24 hours

in one hour increments.



Use this button to select a delayed start of the washer. The number of hours

will be shown in the Estimated Time Remaining Display. Each press of the

Delay Start Button will increase the time by 1 hour.



One button press after 24 will cancel the Delay Start feature. You can also

cancel the Delay Start feature by turning o power to the washer with the

Power Button.



The Start/Pause Button must be selected to begin the countdown.

EXTRA RINSE BUTTON



Press to add an extra rinse to your wash cycle.

NOTE: Some cycles have this option as a default. See the Cycle Guide for

details.

ESTIMATED TIME REMAINING DISPLAY



The Estimated Time Remaining Display shows the estimated cycle time in

minutes.



When the Delay Start option is being used, the Estimated Time Remaining

Display will show the delay time in hours.

CYCLE STATUS INDICATORS



The Cycle Status lights indicate the stages of the selected cycle.

START/PAUSE BUTTON



Press this button to start a selected cycle or to pause an operating cycle.

NOTE: After starting the wash cycle, you must pause the operating cycle to

change the Wash Temp, Soil Level and Water Level settings.

POWER BUTTON



Press the power button to turn on the washer.

NOTE: If the washer is turned on, but START is not pressed, the power will

automatically turn o after 5 minutes.

14

CYCLE GUIDE

NOTE: To protect your wash load, all options and settings are not available for all

cycles. The shaded boxes indicate the default settings for each cycle.

CYCLE

FABRIC

TYPE

WASH

PROCESS

EST

TIME

WASH

TEMP

SOIL

LEVEL

WATER

LEVEL

EXTRA

RINSE





Heavily

soiled,

durable

colorfast

fabrics

12 Min Soak

25 Min Wash

Rinse

Spin

1:08

Warm Normal Medium



Hot

Cold

Heavy

Light

Super

Large

Small

Whites

White

garments

12 Min Soak

25 Min Wash

Rinse

Spin

1:15

Hot Normal Medium



Warm

Cold

Heavy

Light

Super

Large

Small

Perm

Press

Wrinkle-

free and

synthetics

16 Min Wash

Rinse

Spin

:43

Warm Normal Medium



Cold

Heavy

Light

Super

Large

Small

Normal

Cottons,

linens and

mixed

garments

16 Min Wash

Spray Rinse

Spin

:40

Warm Normal Medium



Hot

Cold

Heavy

Light

Super

Large

Small

Delicate

Lingerie,

sheer

fabrics

with lace

trim

10 Min Wash

Rinse

Spin

:37

Warm Normal Medium



Cold

Heavy

Light

Super

Large

Small

Quick

Cottons,

linens and

mixed

garments

9 Min Wash

Rinse

Spin

:31

Warm Normal Medium



Hot

Cold

Heavy

Light

Super

Large

Small

Rinse &

Spin

Unsoiled

garments

Rinse

Spin

:29

Cold

only

n/a

Medium



Super

Large

Small

Spin



Clean

soaking

wet

garments

Spin :06 n/a n/a n/a



Extra Rinse will add about 7 minutes.

15

OPERATING INSTRUCTIONS

STEP 1 - PREPARE AND SORT LAUNDRY

PREPARE LAUNDRY



Check garment labels for manufacturer’s washing instructions.



Empty pockets and turn them inside out.



Turn down cus and remove any lint or dirt.



Tie strings and sashes so they don’t tangle.



Close zippers, snaps and hooks to avoid snagging.



Remove pins or other sharp objects from clothes to prevent scratching of the

wash basket.



Pretreat all stains and heavily soiled areas.



Turn synthetic and wool knits inside out to avoid pilling.

SORT LAUNDRY



Sort laundry by the type of wash cycle required (water temperature and wash

action).



Separate light colors from dark colors and colorfast items from non-colorfast

items.



Separate heavy duty fabrics from light weight fabrics.



Separate fabrics that attract lint from fabrics that give o lint.



Separate bulky items such as blankets or pillows.

16

STEP 2 - ADD FABRIC CARE PRODUCTS

ADD DETERGENT



Use only High Eciency detergent. HE detergents are specically

formulated with ingredients to avoid problems caused by too

many soap suds. Excess suds will prevent the complete rinsing of

detergent residue from clothes.



If you select the Quick cycle, it is recommended that you use a liquid laundry

detergent to achieve optimum results. Powdered detergent may not dissolve

fast enough to clean well in this cycle.



Determine the amount of detergent. Follow the detergent use instructions on

the container.

NOTE: The proper amount of detergent depends on the size of the load, the soil

level of the clothes, and the softness of the water being supplied to the washer.

Liquid Detergent

1. Fill washer with a small amount of water and add liquid detergent.

NOTE: For best results, add the detergent to the wash basket before loading

with laundry.

2. Run washer for 30 seconds to dissolve detergent completely.

Powdered Detergent

1. Pour measured powdered detergent

directly into the detergent dispenser.





Pour measured liquid chlorine bleach into the

liquid chlorine bleach dispenser.

NOTE: Use only liquid bleach in this dispenser.

IMPORTANT: Be careful not to spill undiluted

bleach onto the washer cabinet or your

clothes. Since it is a strong chemical, it may

damage clothes or the nish of the washer.



Follow manufacturer’s directions on garment

label for recommended use of liquid or

powder bleach.

17

STEP 3 - LOAD THE WASHER

1. Load garments loosely and evenly around the wash basket.

2. Do not place clothes directly over the center of the pulsator.

3. Close the washer lid.

NOTES:



Do not overload or stu items into the wash basket. Overloading may reduce

wash eciency, cause excess wear and possibly cause creasing or wrinkling of

the load.



The washer will not pulsate or spin with the lid open.

STEP 4 - START THE WASHER

1. Press the POWER button to turn the washer on.

2. Select a wash cycle.

3. Modify the default settings and options if desired.

4. Press the START/PAUSE button to start the wash cycle.

18

CARE AND CLEANING GUIDE

WARNING

Always unplug your washer to avoid electric shock before cleaning.

Ignoring this warning may result in death or injury.

Before using cleaning products, always read and follow manufacturer’s

instructions and warnings to avoid personal injury or product damage.

CLEANING AND MAINTENANCE

GENERAL CARE



Only use a damp or sudsy cloth for cleaning the control panel.



If you spill liquid/powdered softener, bleach or detergent on the cabinet, wipe

the cabinet immediately to avoid damage to the nish.



Do not use abrasive cleansers, harsh chemicals, ammonia, chlorine bleach,

concentrated detergent, or solvents to clean the washer. These chemicals may

dissolve, damage, or discolor the washer.



After washing clothes, leave the lid open so that moisture inside the machine

can evaporate and to prevent the growth of mold or mildew.

DETERGENT DISPENSER

1. Pull the dispenser drawer out to the stop and lift up slightly to remove.

2. Rinse the dispenser with warm water and dry it thoroughly with a soft cloth.

3. Insert the drawer at a slightly downward angle and push it back into place.

LINT FILTER

1. Push down on the tab at the top of the lter to release

the lter from the wash basket.

2. Turn the lter over so the back side of the lter is facing

upward.

3. While holding the lter rmly with one hand, lift up on

the bottom of the lter to separate the front of the lter

from the back, so you can access the lter screen.

4. Clean the lter screen and replace the back of the lter.

5. Slide the lter into the wash basket and rmly press it into place.

IMPORTANT: Both lint lters must be in place during the wash cycles. Clean the lint

screens after each wash load.

La page est en cours de chargement...

Haier HLP28E Manuel utilisateur

Haier HLP28E Manuel utilisateur

dans d''autres langues

Documents connexes