Haier GWT560BW Manuel utilisateur

Top-Load Clothes Washer

Laveuse à chargement par le haut

Lavadora de ropa con carga superior

User Manual

Guide de l’utilisateur

Manual del usuario

GWT560BW

Designed for

!"#$%&'!()'*+,

use HE detergent.

Conçue pour

#-./(,(&'-'!/0+,

utiliser un

10/(2"()/, %3

Diseñada para un

-4/-,(5'!()'!-+,.6(,

detergente HE

784/-,(5'!()'!-93

1

TABLE OF CONTENTS

IMPORTANT SAFETY INSTRUCTIONS .................................................................2

Installation Safety Precautions ..................................................................................... 2

General Safety Precautions .......................................................................................... 3

PARTS AND FEATURES .......................................................................................4

INSTALLATION INSTRUCTIONS ..........................................................................5

Tools Needed ................................................................................................................. 5

Parts Supplied ................................................................................................................ 5

Location Requirements ................................................................................................. 5

Drain System Requirements ......................................................................................... 6

Electrical Requirements ................................................................................................7

STEP BY STEP INSTRUCTIONS ............................................................................ 8

Step 1 - Unpack the Washer .......................................................................................... 8

Step 2 - Connect and Secure the Drain Hose .............................................................. 9

Step 3 - Connect the Water Hoses ............................................................................... 9

Step 4 - Level the Washer ...........................................................................................11

Step 5 - Complete Installation ....................................................................................11

CONTROL PANEL AND FEATURES .................................................................... 12

OPERATING INSTRUCTIONS ............................................................................. 17

Step 1 - Prepare and Sort Laundry ..............................................................................17

Step 2 - Add Fabric Care Products ..............................................................................17

Step 3 - Load the Washer ............................................................................................18

Step 4 - Start the Washer ............................................................................................18

CARE AND CLEANING GUIDE ............................................................................ 19

Cleaning and Maintenance ..........................................................................................19

Cleaning the Wash Tub ................................................................................................19

Vacationing Precautions .............................................................................................20

Moving or Storage Preparation ...................................................................................20

TROUBLESHOOTING ........................................................................................ 21

LIMITED WARRANTY ........................................................................................ 24

RECORD KEEPING

Thank you for purchasing this Haier

product. This user manual will help you

get the best performance from your

new washer.

For future reference, record the model

and serial number located on back of

the washer, and the date of purchase.

Staple your proof of purchase to this

manual to aid in obtaining warranty

service if needed.

___________________________________

Model number

___________________________________

Serial number

___________________________________

Date of purchase

2

IMPORTANT SAFETY INSTRUCTIONS

WARNING

To reduce the risk of ﬁre, electric shock, or injury to persons when using

your appliance, follow the basic precautions, including the following:

:

Read all of the instructions before using this appliance.

:

Use this appliance only for its intended purpose as described in this user

manual.

:

Do not use the washer for commercial clothes washing.

:

Under certain conditions, hydrogen gas may be produced in a hot-water

system that has not been used for 2 weeks or more. HYDROGEN GAS

IS EXPLOSIVE. If the hot water system has not been used for such a

period, before using a washing machine, turn on all hot-water faucets

!"#$%&#&'%#( &%)#*+(#,)+-#% .'#,+)#/%0%) $#-1!2&%/3#4'1/#(1$$#)%$% /%#

!5# ..2-2$ &%"#'5")+6%!#6 /3#7/#&'%#6 /#1/#* -- 8$%9#"+#!+&#/-+:%#

+)#2/%# !#+;%!#* -%#"2)1!6#&'1/#&1-%3

INSTALLATION SAFETY PRECAUTIONS

DANGER

Before you throw away your old appliance, remove the door or lid so

that children cannot hide or get trapped inside your old appliance.

:

This appliance must be properly installed and located in accordance with

the installation instructions before it is used.

:

Do not store or install this appliance where it will be exposed to

temperatures below freezing or exposed to weather, which can cause

damage to the appliance.

:

The appliance must be properly grounded to conform with all electrical

codes and ordinances. See “Electrical Requirements” section.

3

GENERAL SAFETY PRECAUTIONS

:

Keep the area around your appliance free from combustible materials

such as lint, paper, rags or chemicals.

:

Close supervision is necessary if this appliance is used by or near

children. Do not allow children to play on, with, or inside this appliance.

:

Do not place articles that have been previously cleaned in, washed in,

soaked in, or spotted with gasoline, dry-cleaning solvents or other

* -- 8$%#+)#%<;$+/10%#/28/& !.%/#1!#&'%#( /'#( &%)3#4'%/%#/28/& !.%/#

610%#+=#0 ;+)/#&' &#.+2$"#16!1&%#+)#%<;$+"%3

:

# #>+#!+&# ""#6 /+$1!%9#")5?.$% !1!6#/+$0%!&/9#+)#+&'%)#* -- 8$%#+)#

%<;$+/10%#/28/& !.%/#&+#&'%#( /'#( &%)3#4'%/%#/28/& !.%/#610%#+=#

vapors that could ignite or explode.

:

Do not reach into the appliance if the wash basket, tub or agitator is

moving.

:

Do not tamper with the controls.

:

Never unplug your washer by pulling on the power cord. Always grasp

&'%#;$26#@)-$5# !"#;2$$#/&) 16'&#+2&#,)+-#&'%#+2&$%&3

:

To minimize the possibility of electric shock, unplug this appliance from

the power supply before attempting any maintenance or cleaning.

NOTE: A(1&.'1!6#+=#;+(%)#(1&'#&'%#B+(%)#82&&+!#"+%/#CD4#"1/.+!!%.&#

the appliance from the power supply.

:

Do not attempt to service, repair or replace any part of the appliance

2!$%//#/;%.1@. $$5#)%.+--%!"%"#1!#&'1/#2/%)#- !2 $#+)#1!#;28$1/'%"#

repair instructions that you understand and have the skills to carry out.

:

Before discarding or removing from service, remove the washer door or

lid.

SAVE THESE INSTRUCTIONS

HOUSEHOLD USE ONLY

4

PARTS AND FEATURES

C

D

E

G

Q

P

O

N

H

M

F

B

A

J

K

L

I

Top Lid

Control Panel

Cabinet

Fabric Softener Dispenser

Leveling Feet (4)

Lid Safety Switch

Liquid Bleach Dispenser

Access Panel

Pulsator

Outer Tub Cover

Balance Ring

Wash Basket

Drain Port

Power Cord (120 Volt/ 60 Hz)

Cold Water Inlet Value

Hot Water Inlet Valve

Q

Back Cover

5

INSTALLATION INSTRUCTIONS

TOOLS NEEDED

:

Pliers

:

Wrench

:

Flat-blade Screwdriver

:

Measuring Tape

:

Carpenter’s Level

PARTS SUPPLIED

:

Drain Hose Clamp

:

Drain Hose Hook

:

Drain Hose

:

Water Hoses (2)

E* &#( /'%)/#;)%?1!/& $$%"F

:

User Manual

LOCATION REQUIREMENTS

:

# #4'%#( /'%)#-2/&#8%#1!/& $$%"#+!# #/+$1"#*++)#&+#-1!1-1G%#018) &1+!#"2)1!6#&'%#

/;1!#.5.$%3#7#.+!.)%&%#*++)#1/#&'%#8%/&3

:

# #4'%#*++)#/'+2$"#8%#$%0%$#(1&'#- <1-2-#/$+;%#+,#HI#EJK#--F#2!"%)#%!&1)%#( /'%)3

:

A suitable location is protected from direct sunlight and heat sources such as

radiators, baseboard heaters, or cooking appliances.

:

Do not install on carpeting.

:

The location must have a grounded electrical outlet located within 4 ft. (1.2 m) of

power cord on the back of the washer.

:

Hot and cold water faucets must be present within 3 ft. (0.9 m) of the hot and

cold connections on the washer.

:

A water heater must supply hot water with a temperature of at least 120°F

(49°C).

:

The water pressure should be between 20 and 100 psi (138 and 690 kPa).

WARNING

Do not install or operate the washer where it will be exposed to

temperatures below 32°F (0°C). Water remaining in the washer will

freeze and cause damage to the washer.

6

WASHER DIMENSIONS

27"

(68.6 cm)

27

"

(68.6 cm)

42½

"

(108.0 cm)

DRAIN SYSTEM REQUIREMENTS

WALL OR FLOOR STANDPIPE

The height of the standpipe must be between 39” (99 cm) and 60” (153 cm) from the

bottom of the washer. The minimum diameter of the standpipe must be 2” ( 5 cm).

Wall Floor

39" – 60"

(99 cm – 153!cm)

7

LAUNDRY TUB

The laundry tub must have a minimum

capacity of 20 gal. (76 L). The height of the

laundry tub must be at least 39” (99 cm)

and no more than 48” (122 cm).

39" – 48"

(99 cm – 122!cm)

ELECTRICAL REQUIREMENTS

WARNING

The washer must be connected to a properly grounded 120 volt, 60 Hz.,

AC only, 15- or 20-amp, fused electrical supply. A time-delay fuse or

circuit breaker is recommended.

:

If the electric supply provided does not meet the above requirements, contact a

licensed electrician.

WARNING

Improper connection of the equipment-grounding conductor can result

in a risk of electric shock. Check with a qualiﬁed electrician or

serviceman if you are in doubt as to whether the appliance is properly

grounded.

:

This appliance must be grounded. In the event of malfunction or breakdown,

grounding will reduce the risk of electric shock by providing a path of least

resistance for electric current.

:

This appliance is equipped with a cord having an equipment-grounding

conductor and a grounding plug. The plug must be plugged into an appropriate

outlet that is properly installed and grounded in accordance with all local codes

and ordinances.

:

Do not use a 3 prong plug adapter.

:

Do not use an extension cord.

8

STEP BY STEP INSTRUCTIONS

INSTALLING YOUR WASHER

L%#)%.+--%!"#&' &#5+2)#!%(#( /'%)#8%#1!/& $$%"#85# #M2 $1@%"# ;;$1 !.%#

technician. If you feel that you have the skills to install the washer, please read the

installation instructions carefully before installing.

CAUTION: If, after completing these steps, you are unsure that the washer is

;)+;%)$5#1!/& $$%"9#.+!& .&# #M2 $1@%"# ;;$1 !.%#&%.'!1.1 !3

WARNING

If your washer was just delivered and the outside temperature was

below freezing, do not operate until the washer warms up to room

temperature.

STEP 1 - UNPACK THE WASHER

1. Remove all packing materials. This includes the foam base and all adhesive tape

holding the washer accessories inside and outside.

2. Open the top lid to remove the wash basket brace. Pull to remove.

NOTE: Save the wash basket brace to use when moving the washer in the future.

3. Inspect and remove any remains of packing, tape or printed materials before

using the washer.

WARNING

To avoid danger of suﬀocation, keep plastic bag and other packing

material away from babies and children. Do not use this bag in cribs,

carriages and playpens. The plastic bag could block nose and mouth

and prevent breathing. This bag is not a toy.

9

STEP 2 - CONNECT AND SECURE THE DRAIN HOSE

1.# #N++/%!#&'%#") 1!#'+/%#.$ -;#(1&'# #* &?

blade screwdriver. Slide the clamp up the

") 1!#'+/%9#+=#&'%#'+/%#)288%)#%!"3

2. Fit the drain hose rubber end over the

plastic drain port on the washer.

3. Slide the drain hose clamp over the drain

hose rubber end and drain port.

4. Tighten the drain hose clamp to secure the

connection.

5. Put the drain hose hook end in a drain pipe

or laundry tub.

6. Secure the drain hose in place by fastening it to a water hose, the standpipe, or a

leg on the laundry tub. See “Drain System Requirements” for illustrations.

STEP 3 - CONNECT THE WATER HOSES

IMPORTANT: Only use new hoses when installing the washer.

NOTE: Periodically inspect hoses for cracks, cuts, leaks or wear. Replace with new

hoses every 5 years.

NOTE: Hot water needs to be set at a temperature of at least 120ºF - 140ºF. (49ºC-

60ºC) for the soap to dissolve and to avoid soap residue remaining on clothes.

1. O'%.:#&' &# #* &#( /'%)#1/#;)%/%!&# !"#@)-$5#1!#;$ .%#1!#% .'#%!"#+,#&'%#( &%)#

inlet hoses. Flat washers are pre-installed at the factory.

A

Washer

10

2. The hose couplers are color coded to assist you in making the proper

connections. You may want to use gray for cold and red for hot. Thread the inlet

hoses onto the water faucets by hand until snug. Then using pliers, tighten an

additional two-thirds turn.

IMPORTANT: To avoid damage to the hose couplings, do not overtighten.

NOTE: To avoid damage to the faucets do not use plumber’s tape or sealants on

the valve threads.

3. Thread the other end of the inlet hoses by hand onto the inlet valves marked

“H” (hot) and “C” (cold) on the back of the washer until snug. Then using pliers,

tighten an additional two-thirds turn.

IMPORTANT: To avoid damage to the hose couplings, do not overtighten.

NOTE: To avoid damage to the washer inlet valves, do not use plumber’s tape or

sealants on the valve threads.

4. Turn on the hot and cold water faucets and check for leaks. If there is any leaking,

check steps 1 through 3 again.

11

STEP 4 - LEVEL THE WASHER

IMPORTANT: Proper leveling of the washer will help reduce noise and vibration.

1. B$ .%#( /'%)#1!#1&/#@! $#$+. &1+!3#O'%.:#&' &#&'%#( &%)# !"#") 1!#$1!%/# )%#!+&#

/&) 1!%"#+)#;1!.'%"3#P :%#/2)%#&' &# $$#,+2)#,%%&# )%#@)-$5#1!#.+!& .&#(1&'#&'%#

*++)# !"#&' &#&'%#( /'%)#)%/&/#/+$1"$5#1!#;+/1&1+!3

2. Using a carpenter’s level, check to make sure the washer is level from side to

side and from front to back.

3. If the washer is not level, adjust the leveling feet. Turn clockwise to extend (raise

the washer) or counterclockwise to retract (lower the washer).

Raise Lower

STEP 5 - COMPLETE INSTALLATION

1. Plug the washer into a grounded 3 prong outlet.

2. Check that water faucets are turned on.

3. Dispose of/recycle all packaging materials.

4. Run a normal wash cycle using detergent to test and

clean the washer. See the ”Operating Instructions”

section.

12

CONTROL PANEL AND FEATURES

CONTROL PANEL

A

B

E H JIDC

F G K LM

CYCLE STATUS INDICATORS

:

# ##L'%!#&'%#( /'%)#1/#@)/&#;+(%)%"#+!9#&'%#O5.$%#A& &2/#$16'&/#1!"1. &%#&'%#

stages of the selected cycle.

:

As the washer is operating, the active stage blinks. As a stage is completed,

&'%#$16'&#(1$$#&2)!#+=# !"#&'%#!%<&#/& 6%#(1$$#8%61!#&+#8$1!:3

:

# #4'%#%!&1)%#( /'#.5.$%#1/#.+-;$%&%#('%!# $$#+,#&'%#$16'&/#&2)!#+=3

NOTE: For the Normal and Eco Wash cycles, the Soak and Wash lights

may blink at the same time. This is to indicate a short soak that has been

designed into the wash cycle.

POWER BUTTON

:

# Q/%#&'1/#82&&+!#&+#&2)!#&'%#( /'%)#+!# !"#&+#&2)!#&'%#;+(%)#+=3

NOTE: If the washer is powered on and is not started, it will automatically

&2)!#+=# ,&%)# 8+2&#K#-1!2&%/3

SPIN SPEED BUTTON

:

A spin speed setting will automatically be selected with the wash cycle. Use

this button to change the default setting.

:

Not all selections are available for all cycles.

CYCLE SELECTION KNOB

:

There are 8 wash cycles to choose from:

Whites - Use this cycle for heavily soiled durable white fabrics.

, , (-;*,<./* - Use this cycle for heavily soiled durable garments. This cycle

can also be used for towels, sports gear, children’s clothes, etc.

13

, ,=.4>* - Use this cycle to wash large items such as comforters, sleeping bags,

and blankets.

Normal - Use this cycle for normally soiled cottons and mixed fabric loads.

Eco Wash - Use this cycle for normally soiled mixed fabric loads and to save

energy with cooler wash water. Pre-soak is added by default and agitation is

longer to compensate for lower temperature settings.

Perm Press - Use this cycle for wrinkle-free clothing, cotton/poly blend

fabrics, and dress shirts and pants.

Delicate - Use this cycle to wash lightly soiled garments and delicate clothes

that need gentle washing.

Quick Wash - Use this cycle to wash small, lightly soiled loads that are

needed in a hurry.

:

There are also 4 specialty cycles to choose from:

Rinse & Spin - Use this cycle to relax wrinkles, remove excess detergent, and

refresh clean garments.

, ,?@!),A)4*,$ Use this cycle to remove water from clean clothes. For certain

delicate and cotton clothes that you do not wish to put into the dryer, this is

an ideal cycle.

Soak - Use this cycle to loosen heavy soils and to help remove stubborn

stains. At the end of the cycle, the wash water will drain, but the wash basket

will not spin. The load is ready for additional detergent and to be reset to

start a regular wash cycle.

Clean Washer - Use this cycle once a month to keep the inside of the washer

clean. See the Care and Cleaning Guide section for step by step instructions

to Clean the Wash Tub.

IMPORTANT: Do not put clothing in the washer with this cycle.

START/PAUSE BUTTON

:

Press this button to start a selected cycle or to pause an operating cycle.

NOTE: After starting a wash cycle, you must pause the operating cycle to

change options or settings.

WASH TEMP BUTTON

:

Use this button to select a wash temperature; all rinses use cold water. For

best results, follow your garment label instructions and use the warmest

water temperature that is safe for your fabric.

:

Not all selections are available for all cycles.

:

Hot and Warm may be cooler than what an older generation washer

provides.

:

Cold water is mixed with some hot water for both Cool and Cold.

:

Tap Cold only uses water from the cold tap.

SOIL LEVEL BUTTON

:

# #Q/%#&'1/#82&&+!#&+#@!%#&2!%#5+2)#( /'#.5.$%#8 /%"#+!#&'%#/+1$#$%0%$#+,#5+2)#

laundry. Adjusting this setting will result in longer or shorter wash times.

14

ESTIMATED TIME REMAINING DISPLAY

:

This display shows the estimated total time for a wash cycle in minutes.

As the washer operates, the minutes will count down to show the time

remaining. The original estimated time may be recalculated as the washer

adjusts for load size and other variables.

:

When using the Delay Wash feature, this display will show the number of

hours selected for a delay start of the washer.

:

If the washer senses a malfunction, an error code will be shown in the

display. Please refer to the “Troubleshooting” section for a list of error codes

and their possible causes and solutions.

FABRIC SOFTENER BUTTON

:

Turn this feature on when using the fabric softener dispenser. This will

ensure that the selected wash cycle is optimized for a rinse additive. At the

/& )&#+,#&'%#@! $#)1!/%9#, 8)1.#/+,&%!%)#(1$$#8%#)%$% /%"#1!&+#&'%#( /'#$+ "# /#

&'%#"1/;%!/%)#1/#*2/'%"#(1&'#( &%)3

DELAY WASH BUTTON

:

Use this button to select a delayed start of the washer. The number of hours

will be shown in the Estimated Time Remaining Display. Each press of the

Delay Wash Button will increase the time by 1 hour.

:

One button press after 24 will cancel the delay wash feature. You can also

. !.%$#&'%#>%$ 5#L /'#,% &2)%#85#&2)!1!6#+=#;+(%)#&+#&'%#( /'%)#(1&'#&'%#

Power Button.

:

The LED above the button indicates that the Delay Wash feature has been

selected. The Start/Pause Button must be selected to begin the countdown.

The LED indicator will blink signaling that the delay function is operating.

NOTE: The washer lid must be closed to begin the delay countdown. Opening

the lid will pause an active countdown. To resume the countdown, close the lid

and press the Start/Pause Button.

CYCLE SIGNAL BUTTON

:, ,

Use this button to adjust the volume of control panel beeps and the end-of-

.5.$%#/16! $3#7,&%)#&'%#( /'%)#1/#;+(%)%"#+=9#&'%#/16! $#)%&2)!/#&+#&'%#R16'#

setting.

EXTRA RINSE BUTTON

:, ,

Use this button to select or deselect the Extra Rinse option.

NOTE: The Whites cycle automatically selects the Extra Rinse option.

PRE-SOAK OPTION

:, ,

Press and hold the Extra Rinse Button for 3 seconds to select and deselect

this option. The Soak indicator in the Cycle Status group will light when Pre-

soak is selected.

NOTE: The Whites, Heavy Duty, and Eco Wash cycles automatically select

the Pre-Soak option.

15

CYCLE GUIDE

NOTE: To protect your wash load, all options and settings are not available for all

cycles. The shaded boxes indicate the default settings for each cycle.

CYCLE FABRIC TYPE

WASH

PROCESS

EST

TIME

WASH

TEMP

SPIN

SPEED

SOIL

LEVEL

PRE

SOAK

EXTRA

RINSE

Whites

White garments

28 Min Wash

Rinse

Spin

92

Hot High Heavy

: :

Warm

Cool

Cold

Tap Cold

Low

No Spin

Ex Heavy

Normal

Light

(-;*,

<./*

Heavily soiled,

durable colorfast

fabrics

28 Min Wash

Rinse

Spin

79

Warm High Heavy

: :

Hot

Cool

Cold

Tap Cold

Low

No Spin

Ex Heavy

Normal

Light

=.4>*

Sheets, sleeping

bags, small

comforters, and

jackets

14 Min Wash

Rinse

Spin

48

Warm High Normal

: :

Hot

Cool

Cold

Tap Cold

Low

No Spin

Ex Heavy

Heavy

Light

Normal

Cottons, linens

and mixed

garments

5 Min Soak

14 Min Wash

Spray Rinse

Spin

44

Warm High Normal

: :

Hot

Cool

Cold

Tap Cold

Ex Heavy

Heavy

Light

Eco

Wash

Cottons, linens

and mixed

garments

5 Min Soak

18 Min Wash

Spray Rinse

Spin

62

Warm High Normal

: :

Hot

Cool

Cold

Tap Cold

No Spin

Ex Heavy

Heavy

Light

Perm

Press

Wrinkle-free and

synthetic fabrics

14 Min Wash

Rinse

Spin

44

Warm Low Normal

: :

Cool

Cold

Tap Cold

No Spin

Ex Heavy

Heavy

Light

Delicate

Lingerie, sheer

fabrics with lace

trim

6 Min Wash

Rinse

Spin

33

Warm Low Light

: :

Cool

Cold

Tap Cold

No Spin

Heavy

Normal

Quick

Wash

Cottons, linens

and mixed

garments

7 Min Wash

Spray Rinse

Spin

28

Warm High Light

: :

Hot

Cool

Cold

Tap Cold

Low

No Spin

Heavy

Normal

Rinse &

Spin

Unsoiled

garments

Rinse

Spin

22

Tap Cold High

n/a

:

Low

No Spin

Spin

A)4*

Clean, soaking wet

garments

Spin 13 n/a

High

n/a

Low

Soak

Heavily soiled

fabrics

Short

Agitation

Soak

57

Warm No Spin Normal

Hot

Cool

Cold

Tap Cold

Ex Heavy

Heavy

Light

Clean

Washer

Do not put clothes

in the washer with

this cycle

Agitate &

Spin

62

Hot

n/a n/a

:

Estimated Time is based on an average wash load size. Actual time will vary based on the

amount of clothes being washed and other variables such as supply line water pressure.

:

Pre-Soak will add from 8 to 20 minutes depending on the soil level selection.

:

Extra Rinse will add about 12 minutes.

16

FEATURES

HIGH-EFFICIENCY

:

This washer utilizes a pulsator wash system to gently clean clothes using less

water and energy than a traditional agitator washer.

:

Less water produces a concentrated water and detergent solution that

aggressively works to loosen soils.

:

# #Q/%#+!$5#R16'?ST.1%!.5#"%&%)6%!&3#4'%#;)+;%)#"%&%)6%!&#$ 8%$#/'+2$"#

1!.$2"%# !#UR?SI#$+6+#+)#&'%#(+)"/#UR16'?ST.1%!.5I3#V%62$ )#"%&%)6%!&/#(1$$#

create excessive suds that can damage washer components, reduce rinse

;%),+)- !.%9# !"#$% "#&+#/+ ;#@$-#821$"?2;#&' &#.)% &%/#-+$"# !"#-1$"%(3#

Follow the detergent manufacturer’s instructions for the amount of H-E

detergent to use.

IMPORTANT:#4'%#( /'#8 /:%&#(1$$#!+&#@$$#(1&'#( &%)#$1:%# #&) "1&1+! $# 61& &+)#

washer. It is normal for some of the clothes to be above the water level. As the

washer dampens the load and begins to move garments, they will settle to the

8+&&+-#8 /:%&3#>+#!+&# ""#6 )-%!&/#&+#@$$#&'%#8 /:%&3

AUTOMATIC LOAD SIZE SENSING

:

The control panel does not have a water level button because the washer is

equipped with sensors and intelligence to automatically measure the load size

!"#;)+;%)$5#"%&%)-1!%#&'%# -+2!&#+,#( &%)#!%.%// )5#,+)# #'16'?%T.1%!.5#

wash.

IMPORTANT: As the washer dampens the load and begins to move garments,

&'%5#(1$$#/%&&$%#&+#&'%#8+&&+-#8 /:%&3#>+#!+&# ""#6 )-%!&/#&+#@$$#&'%#8 /:%&3

17

OPERATING INSTRUCTIONS

STEP 1 - PREPARE AND SORT LAUNDRY

PREPARE LAUNDRY

:

Check garment labels for manufacturer’s washing instructions.

:

Empty pockets and turn them inside out.

:

# 42)!#"+(!#.2=/# !"#)%-+0%# !5#$1!&#+)#"1)&3

:

Tie strings and sashes so they don’t tangle.

:

Close zippers, snaps and hooks to avoid snagging.

:

Remove pins or other sharp objects from clothes to prevent scratching of the

wash basket.

:

Pretreat all stains and heavily soiled areas.

:

Turn synthetic and wool knits inside out to avoid pilling.

SORT LAUNDRY

:

Sort laundry by the type of wash cycle required (water temperature and wash

action).

:

Separate light colors from dark colors and colorfast items from non-colorfast

items.

:

Separate heavy duty fabrics from light weight fabrics.

:

# A%; ) &%#, 8)1./#&' &# &&) .&#$1!&#,)+-#, 8)1./#&' &#610%#+=#$1!&3

STEP 2 - ADD FABRIC CARE PRODUCTS

ADD DETERGENT

:

# #Q/%#+!$5#R16'#ST.1%!.5#"%&%)6%!&3#RS#"%&%)6%!&/# )%#/;%.1@. $$5#

formulated with ingredients to avoid problems caused by too

many soap suds. Excess suds will prevent the complete rinsing of

detergent residue from clothes.

:

Pour liquid or powder detergent and color safe bleach directly into the wash

basket before loading clothes.

NOTE: The proper amount of detergent depends on the size of the load, the soil

level of the clothes, and the softness of the water being supplied to the washer.

18

8<<,=B%8C ,7DE,<%?DF%<9

:

Pour measured liquid chlorine bleach into the

liquid bleach dispenser.

NOTE: Use only liquid bleach in this dispenser.

IMPORTANT: Be careful not to spill undiluted

bleach onto the washer cabinet or your

clothes. Since it is a strong chemical, it may

" - 6%#.$+&'%/#+)#&'%#@!1/'#+,#&'%#( /'%)3

:

Follow manufacturer’s directions on garment

label for recommended use of liquid or powder

bleach.

8<<,E8=FDC,?AEG%H%F,7DE,<%?DF%<9

:

Pour measured liquid fabric softener into the

fabric softener dispenser.

:

Use the amount recommended by the fabric

/+,&%!%)#- !2, .&2)%)9#82&#"+#!+&#@$$# 8+0%#

the “Max Fill” line.

:

# #W 8)1.#A+,&%!%)#1/#"1/;%!/%"#"2)1!6#&'%#@! $#

rinse.

IMPORTANT: The Fabric Softener option must

be selected when using this dispenser. Do

not pour fabric softener directly on clothes

because it could create spots or stains.

Max

Fi

ll

STEP 3 - LOAD THE WASHER

1. Load garments loosely and evenly around the wash basket.

2. Do not place clothes directly over the center of the pulsator.

3. Close the washer lid.

NOTES:

:

# #>+#!+&#+0%)$+ "#+)#/&2=#1&%-/#1!&+#&'%#( /'#8 /:%&3

:

The washer will not pulsate or spin with the lid open.

STEP 4 - START THE WASHER

1. Turn the washer on by pressing the POWER BUTTON.

2. Select a wash cycle by turning the CYCLE SELECTION KNOB.

3. Modify the default settings and options if desired.

4. Press the START/PAUSE BUTTON on the face of the knob to start the wash

cycle.

La page charge ...

Haier GWT560BW Manuel utilisateur

Haier GWT560BW Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents