LG 24LH4830-PU Le manuel du propriétaire

Catégorie
Téléviseurs LED
Taper
Le manuel du propriétaire
P/No: MBM65369302 (1704-REV02)
LED TV
TÉLÉVISEUR DEL
TV MONITOR LED
24LH4830
24LJ4840
*MBM65369302*
www.lg.com
AAA
ENGLISH
Easy Setup Guide
Please read this manual carefully before operating your set and retain it for future reference.
FRANÇAIS
Guide de confi guration rapide
Avant d’utiliser l’appareil, veuillez lire attentivement ce manuel et le conserver pour pouvoir vous y reporter
ultérieurement.
ESPAÑOL
Guía Rápida de Confi guración
Lea atentamente este manual antes de poner en marcha el equipo y consérvelo para futuras consultas.
ENGLISH Read Safety and Reference.
FRANÇAIS Lire le document Sécurité et références.
ESPAÑOL Leer Seguridad y Consultas.
X 4
(M4 X L10)
Depending on model
Selon le modèle
Según el modelo
1 2
L
R
R
ANTENNA
/CABLE IN
HDMI IN
COMPONENT IN
DC-I
N
(19 V )
VIDEOAUDIO
AV IN
(MONO)
COMPONENT IN
AV IN
COMPONENT IN
VIDEO
AUDIO
VIDEO
AUDIO
(MONO)
(MONO)
Y
P
B
P
R
L
R
Y
P
B
P
R
L
R
1(ARC)
2
LAN
OPTICAL
DIGITAL
AUDIO OUT
S
ERVI
C
E
O
NLY
HDMI OUT
AUDIO OUT
DVI OUT
AV IN
YP
B
P
R
L
R
VIDEOAUDIO
VIDEOAUDIO
USB IN 2
5 V 0.5 A
USB IN 1
5 V 0.5 A
USB IN
5 V 0.5 A
C
N
(19 V )
VIDEO
VID
V
1
2
4
3
DC-IN
(19 V )
DC-IN
(19V )
2
1
ENGLISH
MODELS
24LH4830
24LJ4840
Dimensions
(W x H x D)
With stand
556 x 387.3 x 146.3 (mm)
21.8 x 15.2 x 5.7 (inches)
Without stand
556 x 345.2 x 53.1 (mm)
21.8 x 13.5 x 2.0 (inches)
Weight
With stand
3.4 kg (7.4 lbs)
Without stand
3.2 kg (7.0 lbs)
FRANÇAIS
MODÈLES
24LH4830
24LJ4840
Dimensions
(L x H x P)
Avec support
556 x 387,3 x 146,3 (mm)
21,8 x 15,2 x 5,7 (po)
Sans support
556 x 345,2 x 53,1 (mm)
21,8 x 13,5 x 2,0 (po)
Poids
Avec support
3,4 kg (7,4 lb)
Sans support
3,2 kg (7,0 lb)
ESPAÑOL
MODELOS
24LH4830
24LJ4840
Dimensiones
(Ancho x Altura x
Profundidad)
Con base
556 x 387,3 x 146,3 (mm)
Sin base
556 x 345,2 x 53,1 (mm)
Peso
Con base 3,4 (kg)
Sin base 3,2 (kg)
Consumo de energía
(Condición predeterminada)
24 W
Consumo de energía
19 V
2,0 A
Adaptador de CA-CC
Entrada AC 100 240 V ~ 50/60 Hz
Salida 19 V
2,1 A
1
2
0
OWNER’S MANUAL
Safety and Reference
LED TV*
* LG LED TVs are LCD TVs with LED backlighting.
Printed in Korea
P/No : MFL69376202 (1812-REV07)
Copyright © 2018 LG Electronics Inc. All Rights Reserved.
www.lg.com
*MFL69376202*
Please read this manual carefully before operating your TV and
retain it for future reference.
24LH4830
24LJ4840
ENGLISH
2
Table of contents
3 Important safety instructions
7 Licenses
7 Open source software notice
information
7 Preparing
8 Lifting and moving the TV
8 Setting up the TV
8 Using the joystick button
8 Basic functions
9 Adjusting the menu
9 Mounting on a table
9 Using the kensington security
system (optional)
10 Mounting on a wall
11 Connections (Notifications)
11 Connecting to an antenna or cable
11 Other Connections
12 Remote control
13 Troubleshooting
14 Specifications
15 Regulatory
ENGLISH
3
Important safety instructions
Always comply with the following precautions
to avoid dangerous situations and ensure peak
performance of your product.
WARNING/CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead
symbol, within an equilateral triangle, is
intended to alert the user to the presence of
uninsulated dangerous voltage within the
product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock
to persons.
The exclamation point within an
equilateral triangle is intended to alert the
user to the presence of important operating
and maintenance (servicing) instructions in the
literature accompanying the device.
WARNING/CAUTION
- TO REDUCE THE RISK OF FIRE AND ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
WARNING
If you ignore the warning message, you may
be seriously injured or there is a possibility of
accident or death.
CAUTION
If you ignore the caution message, you may
be slightly injured or the product may be
damaged.
NOTE
The note helps you understand and use the
product safely. Please read the note carefully
before using the product.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade or
the third prong are provided for your safety. If
the provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
ENGLISH
4
Only use attachments/accessories specified by
the manufacturer.
Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms
or when unused for long periods of time.
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or
moisture, does not operate normally, or has
been dropped.
Do not press strongly upon the panel with a
hand or a sharp object such as a nail, pencil, or
pen, or make a scratch on it.
Do not stick metal objects or any other
conductive material into the power cord. Do
not touch the end of the power cord while it is
plugged in.
Keep the packing anti-moisture material or
vinyl packing out of the reach of children.
Anti-moisture material is harmful if swallowed.
If swallowed, induce vomiting and go to the
nearest hospital. Additionally, vinyl packing can
cause suffocation. Keep it out of the reach of
children.
CAUTION concerning the Power Cord
(Can differ by country):
Check the specification page of this owner’s
manual to be certain concerning current
requirements. Do not connect too many
devices to the same AC power outlet as this
could result in fire or electric shock. Do not
overload wall outlets. Overloaded wall outlets,
loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked
wire insulation are dangerous. Any of these
conditions could result in electric shock or fire.
Periodically examine the cord of your device,
and if its appearance indicates damage or
deterioration, unplug it, discontinue use of
the device, and have the cord replaced with
an exact replacement part by an authorized
servicer. Protect the power cord from physical
or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall
outlets, and the point where the cord exits the
device. Do not move the TV with the power
cord plugged in. Do not use a damaged or loose
power cord. Be sure do grasp the plug when
unplugging the power cord. Do not pull on the
power cord to unplug the TV.
Warning - To reduce the risk of fire or electrical
shock, do not expose this product to rain,
moisture or other liquids. Do not touch the TV
with wet hands. Do not install this product near
flammable objects such as gasoline or candles,
or expose the TV to direct air conditioning.
Do not expose to dripping or splashing and
do not place objects filled with liquids, such as
vases, cups, etc. on or over the apparatus (e.g.,
on shelves above the unit).
ENGLISH
5
Grounding
- (Except for devices which are not grounded)
Ensure that you connect the earth ground wire
to prevent possible electric shock (i.e., a TV
with a three-prong grounded AC plug must
be connected to a three-prong grounded AC
outlet).
If grounding methods are not possible, have
a qualified electrician install a separate circuit
breaker. Do not try to ground the unit by
connecting it to telephone wires, lightning
rods, or gas pipes.
Circuit
Breaker
Power
Supply
As long as this unit is connected to the AC wall
outlet, it is not disconnected from the AC power
source even if the unit is turned off.
Do not attempt to modify this product in any
way without written authorization from LG
Electronics. Unauthorized modification could
void the user’s authority to operate this product.
Outdoor Antenna Grounding
- (Can differ by country):
If an outdoor antenna is installed, follow
the precautions below. An outdoor antenna
system should not be located in the vicinity
of overhead power lines or other electric light
or power circuits, or where it can come in
contact with such power lines or circuits as
death or serious injury can occur. Be sure the
antenna system is grounded to provide some
protection against voltage surges and built-up
static charges. Section 810 of the National
Electrical Code (NEC) in the U.S.A. provides
information with respect to proper grounding
of the mast and supporting structure,
grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors,
location of antenna discharge unit, connection
to grounding electrodes, and requirements for
the grounding electrode.
Antenna grounding according to the
National Electrical Code, ANSI/NFPA 70
Ground Clamp
Grounding Conductor
(NEC Section 810-21)
Antenna Lead in Wire
Electric Service
Equipment
Antenna Discharge Unit
(NEC Section 810-20)
Ground Clamp
Power Service Grounding
Electrode System
(NEC Art 250, Part H)
NEC: National Electrical Code
Cleaning
- When cleaning, unplug the power cord and
wipe gently with a soft cloth to prevent
scratching. Do not spray water or other liquids
directly on the TV as electric shock may occur.
Do not clean with chemicals such as alcohol,
thinners, or benzene.
Moving
- Make sure the product is turned off,
unplugged, and all cables have been removed.
It may take 2 or more people to carry larger
TVs. Do not press or put stress on the front
panel of the TV.
Ventilation
- Install your TV where there is proper
ventilation. Do not install in a confined space
such as a bookcase. Do not cover the product
with cloth or other materials while plugged in.
Do not install in excessively dusty places.
If you smell smoke or other odors coming from
the TV, unplug the power cord and contact an
authorized service center.
If water or another substance enters the
product (like an AC adapter, power cord, or TV),
disconnect the power cord and contact the
service center immediately. Otherwise, this may
result in fire or electric shock.
Use only an authorized AC adapter and power
cord approved by LG Electronics.
Otherwise, this may result in fire, electric shock,
malfunction, or product deformation.
Never disassemble the AC adapter or power
cord. This may result in fire or electric shock.
ENGLISH
6
Handle the adapter carefully to avoid dropping
or striking it. An impact could damage the
adapter.
Keep the product away from direct sunlight.
Never touch this apparatus or antenna during a
lightning storm.
When mounting a TV on the wall, make sure
not to install the TV by hanging the power and
signal cables on the back of the TV.
Do not allow an impact shock or any objects to
fall into the product, and do not drop anything
onto the screen.
DISCONNECTING THE DEVICE FROM THE
MAIN POWER
The power plug is the disconnecting device.
In case of an emergency, the power plug must
remain readily accessible.
Make sure the power cord is connected securely
to the power plug on the TV.
Batteries
Store the accessories (battery, etc.) in a safe
location out of the reach of children.
This apparatus uses batteries. In your
community there might be regulations that
require you to dispose of these batteries
properly due to environmental considerations.
Please contact your local authorities for disposal
or recycling information.
Do not dispose of batteries in a fire.
Do not short circuit, disassemble, or allow the
batteries to overheat.
Do not use high voltage electrical equipment
near the TV, (e.g., a bug zapper).
This may result in product malfunction.
Dot Defect
- The panel is a high technology product with
resolution of two million to six million pixels.
In a very few cases, you could see fine dots on
the screen while you’re viewing the TV. Those
dots are deactivated pixels and do not affect
the performance and reliability of the TV.
Generated Sound
- Cracking noise A cracking noise that occurs
when watching or turning off the TV is
generated by plastic thermal contraction
due to temperature and humidity. This noise
is common for products where thermal
deformation is required.
- Electrical circuit humming/panel buzzing
A low level noise is generated from a high-
speed switching circuit, which supplies a
large amount of current to operate a product.
It varies depending upon the product.
This generated sound does not affect the
performance and reliability of the product.
Take care not to touch the ventilation openings.
When watching the TV for a long period, the
ventilation openings may become hot. This
does not affect the performance of the product
or cause defects in the product.
Do not install this product on a wall if it could
be exposed to oil or oil mist. This may damage
the product and cause it to fall.
If the TV feels cold to the touch, there may
be a small flicker when it is turned on. This is
normal; there is nothing wrong with TV. Some
minute dot defects may be visible on the
screen, appearing as tiny red, green, or blue
spots. However, they have no adverse effect on
the TVs performance. Avoid touching the LCD
screen or holding your finger(s) against it for
long periods of time. Doing so may produce
some temporary distortion effects on the
screen.
Displaying a still image for a prolonged period
of time may cause an image sticking. Avoid
displaying a fixed image on the TV screen for a
extended length of time.
ENGLISH
7
Licenses
Supported licenses may differ by model.
For more information about licenses,
visit www.lg.com
.
Open source software notice
information
To obtain the source code under GPL, LGPL, MPL,
and other open source licenses, that is contained in
this product, please visit
http://opensource.lge.com
.
In addition to the source code, all referred license
terms, warranty disclaimers and copyright notices
are available for download.
LG Electronics will also provide open source code
to you on CD-ROM for a charge covering the cost
of performing such distribution (such as the cost of
media, shipping, and handling) upon email request
to
. This offer is valid for three
(3) years from the date on which you purchased
the product.
Preparing
NOTE
If the TV is turned on for the first time after it was
shipped from the factory, initialization of the TV
may take a few minutes.
Image shown may differ from your TV.
Your TVs OSD (On Screen Display) may differ
slightly from that shown in this manual.
The available menus and options may differ from
the input source or product model that you are
using.
New features may be added to this TV in the
future.
The items supplied with your product may vary
depending upon the model.
Product specifications or contents of this manual
may be changed without prior notice due to
upgrade of product functions.
For an optimal connection, HDMI cables and
USB devices should have bezels less than 10 mm
(0.39 inches) thick and 18 mm (0.7 inches) width.
Use an extension cable that supports USB 2.0 if
the USB cable or USB flash drive does not fit into
your TVs USB port.
Use a certified cable with the HDMI logo
attached. If you do not use a certified HDMI
cable, the screen may not display or a
connection error may occur.
Recommended HDMI cable types
- High-Speed HDMI®/™ cable
- High-Speed HDMI®/™ cable with Ethernet
#
"
"
#
*A 10 mm (0.3 inches)
*B
18 mm (0.7 inches)
This Smart TV is for VOD (Video On Demand)
service, some smart functions may not be
supported including web browser.
CAUTION
Do not use any unapproved items to ensure the
safety and product’s lifespan.
Any damages or injuries by using unapproved
items are not covered by the warranty.
Some models appear to have a thin film on the
screen. It is actually part of the screen; do not
remove it.
When attaching the stand to the TV set, place
the screen facing down on a cushioned table or
flat surface to protect the screen from scratches.
ENGLISH
8
Lifting and moving the TV
When moving or lifting the TV, read the following
to prevent the TV from being scratched or
damaged and for safe transportation regardless of
its type and size.
It is recommended to move the TV in the box or
packing material that the TV originally came in.
Before moving or lifting the TV, disconnect the
power cord and all cables.
When holding the TV, the screen
should face away from you to
avoid damage.
Hold the top and bottom of the TV frame firmly.
Make sure not to hold the transparent part,
speaker, or speaker grille area.
When transporting the TV, do not expose the TV
to jolts or excessive vibration.
When transporting the TV, keep the TV upright;
never turn the TV on its side or tilt towards the
left or right.
When handling the TV, be careful not to
damage the protruding buttons.
CAUTION
Avoid touching the screen at all times, as this
may result in damage to the screen.
Do not place the product on the floor with its
front facing down without padding. Failure to
do so may result in damage to the screen.
Setting up the TV
CAUTION
Do not carry the TV upside-down as this may
cause it to fall off its stand, resulting in damage
or injury.
When attaching the stand to the TV set, place
the screen facing down on a cushioned table or
flat surface to protect the screen from scratches.
NOTE
Lift up the latch at the bottom of the stand base
and detach the stand base from the TV.
Using the joystick button
(Image shown may differ from your TV.)
You can operate the TV by pressing the button or
moving the joystick left, right, up, or down.
Joystick Button
Basic functions
Power On (Press)
Power Off (Press and Hold)
1
Volume Control
Channels Control
1 If the menu button is on the screen, pressing
and holding the joystick button will let you exit
the menu.
ENGLISH
9
Adjusting the menu
When the TV is turned on, press the joystick
button one time. You can adjust the menu items
moving the joystick button up, down, left, or right.
Turns the power off.
Accesses the main menu.
Clears on-screen displays and returns to TV
viewing.
Changes the input source.
NOTE
If you press the joystick button first, you can not
adjust the volume level and saved channels.
CAUTION
When your finger over the joystick button and
push it to the up, down, left or right, be careful
not to press the joystick button.
Mounting on a table
1 Lift and tilt the TV into its upright position on
a table.
- Leave a 100 mm (3.9 inches) (minimum) space
from the wall for proper ventilation.
100 mm
100 mm
(3.9 inches)
100 mm
100 mm
2 Connect the power cord to a wall outlet.
CAUTION
Do not place the TV near or on sources of heat,
as this may result in fire or other damage.
Using the kensington security
system (optional)
(Depending upon model)
The Kensington security system connector is
located at the rear of the TV. For more information
of installation and using, refer to the manual
provided with the Kensington security system or
visit
http://www.kensington.com
.
Connect the
Kensington security system cable between the TV
and a table.
NOTE
The Kensington security system is optional. You
can obtain additional accessories from your
local dealer.
ENGLISH
10
Mounting on a wall
An optional wall mount can be used with your LG
Television. Consult with your local dealer for a wall
mount that supports the VESA standard used by
your TV model. Carefully attach the wall mount
bracket at the rear of the TV. Install the wall mount
bracket on a solid wall perpendicular to the floor.
If you are attaching the TV to other building
materials, please contact qualified personnel to
install the wall mount. Detailed instructions will
be included with the wall mount. We recommend
that you use an LG brand wall mount. The LG wall
mount is easy to adjust or to connect the cables.
When you do not use LG’s wall mount bracket,
use a wall mount bracket where the device is
adequately secured to the wall with enough
space to allow connectivity to external devices.
If you are using a non-adjustable mount, attach
the mount to the wall. Attach the cables to the TV
first, then attach the TV to the mount.
100 mm
(3.9 inches)
100 mm
100 mm
100 mm
100 mm
Make sure to use screws and wall mounts that
meet the VESA standard. Standard dimensions for
the wall mount kits are described in the following
table.
Model
24LH4830
24LJ4840
VESA (A x B)
A
B
75 x 75
Standard screw M4
Number of screws 4
Wall mount bracket
(optional)
RW120
CAUTION
Must use the enclosed screw in the box.
(Depending on model)
Disconnect the power before moving or
installing the TV. Otherwise electric shock may
occur.
Remove the stand before installing the TV
on a wall mount by performing the stand
attachment in reverse.
If you install the TV on a ceiling or slanted wall,
it may fall and result in severe injury. Use an
authorized LG wall mount and contact the local
dealer or qualified personnel. When using a
third-party wall mount, it is not covered by the
warranty.
Do not overtighten the screws as this may cause
damage to the TV and void your warranty.
Use the screws and wall mounts that meet the
VESA standard. Any damages or injuries by
misuse or using an improper accessory are not
covered by the warranty.
Screw length from outer surface of back cover
should be under 8 mm (0.3 inches).
Wall mount Pad
Back Cover
Standard
screw
: M4 x L10
Wall mount Pad
Back Cover
Max.8 mm
(0.3 inches)
NOTE
Use the screws that are listed on the VESA
standard screw specifications.
The wall mount kit includes an installation
manual and necessary parts.
The wall mount bracket is optional. You can
obtain additional accessories from your local
dealer.
The length of screws may differ depending upon
the wall mount. Make sure to use the proper
length.
For more information, refer to the manual
supplied with the wall mount.
ENGLISH
11
Connections (Notifications)
You can connect various external devices to the
TV. Supported external devices are: HD receivers,
DVD players, VCRs, audio systems, USB storage
devices, PC, gaming devices, and other external
devices. For more information on an external
device’s connection, refer to the manual provided
with each device.
NOTE
If you record a TV program on a DVD recorder or
VCR, make sure to connect the TV signal input
cable to the TV through a DVD recorder or VCR.
For more information about recording, refer
to the manual provided with the connected
device.
The external device connections shown may
differ slightly from illustrations in a manual.
Connect external devices to the TV regardless
about the order of the TV port.
If you connect a gaming device to the TV, use
the cable supplied with the gaming device.
Refer to the external equipment’s manual for
operating instructions.
In PC mode, there may be noise associated
with the resolution, vertical pattern, contrast,
or brightness. If noise is present, change the
PC output to another resolution, change the
refresh rate to another rate, or adjust the
brightness and contrast on the PICTURE menu
until the picture is clear.
Depending upon the graphics card, some
resolution settings may not allow the image to
be positioned on the screen properly.
Connecting to an antenna or cable
Connect an antenna, cable, or cable box to watch
TV. The illustrations may differ from the actual
items and an RF cable is optional.
CAUTION
Make sure not to bend the copper wire of the
RF cable.
Copper wire
Complete all connections between devices,
and then connect the power cord to the power
outlet to prevent damage to your TV.
NOTE
Use a signal splitter to use 2 TVs or more.
DTV Audio Supported Codec: MPEG,
Dolby Digital.
Other Connections
Connect your TV to external devices. For the
best picture and audio quality, connect the
external device and the TV with the HDMI cable.
Depending upon the model, a cable may not be
provided.
ENGLISH
12
Remote control
The descriptions in this manual are based on
the buttons on the remote control. Please read
this manual carefully and use the TV correctly. To
install batteries, open the battery cover, replace
batteries (1.5 V AAA) matching the and ends
to the label inside the compartment, and close
the battery cover. Failure to match the correct
polarities of the battery may cause the battery
to burst or leak, resulting in fire, personal injury,
or ambient pollution. To remove the batteries,
perform the installation actions in reverse. This
remote uses infrared light. When in use, it should
be pointed in the direction of the TVs remote
sensor.
A
A
(Power) Turns the TV on or o.
Returns to the last TV channel.
Activates or deactivates the subtitles.
Shows information on the current
program.
Resizes an image.
(Input) Changes the input source.
Number buttons Enters numbers.
(Dash) Inserts a dash between numbers such
as 2-1 and 2-2.
Accesses the saved channel list.
Alternates between the two last
channels selected (pressing repeatedly).
Adjusts the volume level.
Accesses your favorite channel list.
Displays the program event according to
time scheduler.
(Mute) Mutes all sounds.
Scrolls through the saved channels.
Moves to the previous or next
screen.
B
B
Changes the picture mode.
(Home) Accesses the Home menu.
Changes the sound mode.
(Settings) Accesses the settings.
Accesses the quick menu.
Navigation buttons (up, down, left, right)
Scrolls through menus or options.
Selects menus or options and conrms your
input.
Returns to the previous screen.
Clears all on-screen displays and returns to
TV viewing.
Enables SAP (Secondary Audio Program)
feature. (Depending upon model)
Sets the length of time until the TV to turns
o.
, , , , Control buttons for media contents
Color buttons (
Red, Green, Yellow,
Blue) These access special functions in some
menus.
ENGLISH
13
Troubleshooting
Cannot control the TV with the remote control.
- Check if anything such as tape has been
placed over the receiver.
- Check if there is any obstacle between the
product and the remote control.
- Replace the batteries with new ones.
No image display and no sound is produced.
- Check if the product is turned on.
- Check if the power cord is connected to a wall
outlet.
- Check if there is a problem in the wall outlet by
connecting other products.
The TV turns off suddenly.
- Check the power control settings. The power
supply may be interrupted.
- Check if the Sleep Timer/Timer Power Off
feature is activated in the Timers settings.
- If there is no signal while the TV is on, the TV
will turn off automatically after 15 minutes of
inactivity.
ENGLISH
14
Specifications
Product specifications may be changed without prior notice due to upgrade of product functions. Estimated
yearly energy consumption indicated on the FTC label is measured in accordance with the Test Procedures for
Television Sets (USA only). The actual energy consumption depends on the usage environment (The content
watched, TV settings, etc.).
Models
Dimensions (W x H x D) Weight
Power
consumption
(Outgoing
condition)
Power
requirement
With stand Without stand
With
stand
Without
stand
24LH4830
24LJ4840
556 x 387.3 x 146.3 (mm) 556 x 345.2 x 53.1 (mm) 3.4 (kg) 3.2 (kg)
24 W 19 V
2.0 A
21.8 x 15.2 x 5.7 (inches) 21.8 x 13.5 x 2.0 (inches) 7.4 (lbs) 7.0 (lbs)
AC/DC Adapter
Manufacturer : Lien Chang
Model : LCAP16B-A
Manufacturer : Honor
Model : ADS-45FSN-19 19040GPCU
In : AC 100 – 240 V ~ 50/60 Hz
Out : DC 19 V
2.1 A
Environment condition
Operating Temperature 0 °C to 40 °C (32 °F to 104 °F)
Operating Humidity Less than 80 %
Storage Temperature -20 °C to 60 °C (-4 °F to 140 °F)
Storage Humidity Less than 85 %
Television System
ATSC, NTSC-M, 64 & 256 QAM
Program Coverage
VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135
External Antenna Impedance 75 Ω
Wireless LAN module (WN8122E1) Specifications
Standard
IEEE 802.11a/b/g/n
Frequency Range
2400 to 2483.5 MHz
5150 to 5250 MHz
5725 to 5850 MHz
Output Power (Max.)
802.11a: 16.5 dBm
802.11b: 16 dBm
802.11g: 15.5 dBm
802.11n - 2.4 GHz: 15.5 dBm
802.11n - 5 GHz: 16.5 dBm
As band channels can vary per country, the user cannot change or adjust the operating frequency.
This product is configured for the regional frequency table.
For consideration of the user, this device should be installed and operated with a minimum distance of
20 cm (7.8 inches) between the device and the body.
Contains FCC ID: BEJWN8122E1/Contains IC: 2703H-WN8122E1
ENGLISH
15
Regulatory
FCC Notice
(For USA)
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses
and can radiate radio frequency energy and, if
not installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning
the equipment o and on, the user is encouraged
to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the
equipment and the receiver.
- Connect the equipment to an outlet on a
circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced radio/TV
technician for help.
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference and (2) this device must accept any
interference received, including interference that
may cause undesired operation. Any changes
or modications in construction of this device
which are not expressly approved by the party
responsible for compliance could void the users
authority to operate the equipment.
FCC Radio Frequency Interference
Requirements (for UNII devices)
High power radars are allocated as primary users
of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz
bands. These radar stations can cause interference
with and/or damage this device. This device
cannot be co-located with any other transmitter.
FCC RF Radiation Exposure Statement
[For having wireless function (WLAN,
Bluetooth,...)]
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment. This transmitter must not be
colocated or operating in conjunction with any
other antenna or transmitter. This equipment
should be installed and operated with minimum
distance 20 cm (7.8 inches) between the radiator
and your body. Users must follow the specic
operating instructions for satisfying RF exposure
compliance.
Industry Canada Statement
(For Canada)
[For having wireless function (WLAN,
Bluetooth,...)]
This device contains licence-exempt
transmitter(s)/receiver(s) that comply with
Innovation, Science and Economic Development
Canadas licence-exempt RSS(s). Operation is
subject to the following two conditions:
1) This device may not cause interference.
2) This device must accept any interference,
including interference that may cause undesired
operation of the device.
IC Radiation Exposure Statement
(For Canada)
[For having wireless function (WLAN,
Bluetooth,...)]
This equipment complies with IC radiation
exposure limits set forth for an uncontrolled
environment. This equipment should be installed
and operated with minimum distance 20 cm (7.8
inches) between the antenna & your body.
NOTE : THE MANUFACTURER IS NOT RESPONSIBLE
FOR ANY RADIO OR TV INTERFERENCE CAUSED
BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD
VOID THE USER’S AUTHORITY TO OPERATE THE
EQUIPMENT.
ENGLISH
16
RSS-247 Requirement
(For Canada)
[For product having the wireless function using 5
GHz frequency bands]
i. the device for operation in the band 5150–5250
MHz is only for indoor use to reduce the potential
for harmful interference to co-channel mobile
satellite systems;
ii. for devices with detachable antenna(s), the
maximum antenna gain permitted for devices in
the bands 5250-5350 MHz and 5470-5725 MHz
shall be such that the equipment still complies
with the e.i.r.p. limit;
iii. for devices with detachable antenna(s), the
maximum antenna gain permitted for devices in
the band 5725-5850 MHz shall be such that the
equipment still complies with the e.i.r.p. limits as
appropriate; and
iv. [for devices operating in the band 5250-5350
MHz having an e.i.r.p. greater than 200 mW]
antenna type(s), antenna models(s), and worst-
case tilt angle(s) necessary to remain compliant
with the e.i.r.p. elevation mask requirement set
forth in section 6.2.2.3 of RSS-247 shall be clearly
indicated.
Users should also be advised that high-power
radars are allocated as primary users (i.e. priority
users) of the bands 5250-5350 MHz and 5650-
5850 MHz and that these radars could cause
interference and/or damage to LE-LAN devices.
Note to cable/TV installer
(For USA and Canada)
This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the
National Electric Code (U.S.A.). The code provides
guidelines for proper grounding and, in particular,
species that the cable ground shall be connected
to the grounding system of the building, as close
to the point of the cable entry as practical.
WARNING!
Never place a television set in an unstable
location. A television set may fall, causing
serious personal injury or death. Many injuries,
particularly to children, can be avoided by taking
simple precautions such as:
Using cabinets or stands recommended by the
manufacturer of the television set.
Only using furniture that can safely support the
television set.
Ensuring the television set is not overhanging
the edge of the supporting furniture.
Not placing the television set on tall furniture
(for example, cupboards or bookcases) without
anchoring both the furniture and the television
set to a suitable support.
Not placing the television set on cloth or other
materials that may be located between the
television set and supporting furniture.
Educating children about the dangers of
climbing on furniture to reach the television set
or its controls.
If your existing television set is being retained
and relocated, the same considerations as above
should be applied.
Symbols
Refers to alternating current(AC).
Refers to direct current(DC).
Refers to class II equipment.
Refers to stand-by.
Refers to “ON” (power).
Refers to dangerous voltage.
LG Recycling Policy
(For USA)
LG Electronics oers a customized e-waste
takeback and recycling service that meets
local needs and requirements in the countries
where e-waste regulations are in place, and also
provides product and packaging take-back and
recycling service voluntarily in some countries.
LG Electronics evaluates products’ recyclability at
the design step using LG’s recyclability evaluation
tool, with the goal of improving recyclability
where practicable. Through these activities,
LG seeks to contribute to conserving natural
resources and protecting the environment.
For more information about the LG Recycling
Policy, please visit our global site at
http://www.lg.com/global/sustainability/
environment/take-back-recycling
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40

LG 24LH4830-PU Le manuel du propriétaire

Catégorie
Téléviseurs LED
Taper
Le manuel du propriétaire

dans d''autres langues