Mediatek MT7922A12L Mode d'emploi

Marque: Mediatek

Modèle: MT7922A12L

Taper: Mode d'emploi

This document contains information that is proprietary to MediaTek Inc.

Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited.

Specifications are subject to change without notice.

Version: V0.2

Release Date: 2021-03-10

MT7922A12L

Test-Mode Software Application Note

Part-1: QA-Tool User Guideline

MT7922A22M

SW Tool AN: Part-I

Confidential B

This document contains information that is proprietary to MediaTek Inc.

Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited.

Document Revision History

Version Date Author Change List

V0.1 20210303 Yi-Yan Initial draft release.

V0.2 20210310 Yi-Yan Add section 2.6

MT7922A22M

SW Tool AN: Part-I

Confidential B

This document contains information that is proprietary to MediaTek Inc.

Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited.

Table of Contents

Document Revision History ........................................................................................................................ 2

Table of Contents ...................................................................................................................................... 3

System overview ............................................................................................................................. 4

1.1

General Description ................................................................................................................ 4

QA-Tool .......................................................................................................................................... 5

2.1

How to install QA-tool ............................................................................................................ 5

2.1.1

Install WinPcap ...................................................................................................... 6

2.1.2

Windows 10 install note ......................................................................................... 7

2.1.3

QA-Tool Windows driver ........................................................................................ 8

General Information & Integration Instructions ..................................................................... 11

3.1

General Description of MT7921K ...................................................................................... 11

3.2

Antenna information .......................................................................................................... 12

3.3

Host Integration instructions .............................................................................................. 13

3.4

Host product testing guidance ........................................................................................... 13

MT7922A22M

SW Tool AN: Part-I

Confidential B

This document contains information that is proprietary to MediaTek Inc.

Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited.

1 System overview

1.1

General Description

MT7922A12L chip is highly integrated single chip which have built in 2x2 dual-band wireless LAN and Bluetooth

combo radio. It can be configured in test-mode for performance validation, production testing and regulatory

certification. There are two software tools, QA-Tool and Combo-Tool responsible for evaluating WIFI and

Bluetooth signal and performance testing. This document is introducing how to install and use QA-Tool.

MT7922A22M

SW Tool AN: Part-I

Confidential B

This document contains information that is proprietary to MediaTek Inc.

Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited.

2 QA-Tool

Users have to install 3 major software before using QA-Tool.

 WinPcap

 Windows7 X64 security package

 QA-Tool Windows driver

MTK strongly recommends install QA-Tool on Windows 7-64bit operating system.

2.1 How to install QA-tool

Please follow the procedure listed in below to install QA-Tool

 1

: Install WinPcap

 2

: Update Windows7 security package to register x64 signature mechanism

 3

: Instal QA-Tool Windows driver.

MT7922A22M

SW Tool AN: Part-I

Confidential B

This document contains information that is proprietary to MediaTek Inc.

Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited.

2.1.1 Install WinPcap

If users are the 1

time operating this tool, users should install WinpCap at first. Please follow below link and

steps to install this software.

https://www.winpcap.org/install/

WinPcap version: 4.1.2 or later.

1 2 3

MT7922A22M

SW Tool AN: Part-I

Confidential B

This document contains information that is proprietary to MediaTek Inc.

Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited.

2.1.2 Windows 10 install note

If users can’t install the driver in Windows 10 due to driver integrity check. Try to disable the integrity check to

allow installation.

• Disable Driver Integrity Check

1. Open cmd as Administrator.

2. Execute ‘bcdedit /set nointegritychecks on’

3. Reboot

4. Then install again. If still fail, try do ‘Disable Secure Boot’ below.

NOTE: Re-enable the driver integrity check by executing ‘bcdedit /set nointegritychecks off’ and then

rebooting.

• Disable Secure Boot

Please refer to:

https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/disabling-secure-boot

MT7922A22M

SW Tool AN: Part-I

Confidential B

This document contains information that is proprietary to MediaTek Inc.

Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited.

2.1.3 QA-Tool Windows driver

MT7922A12L supports USB, SDIO and PCIE interface. According to interface type of MT7922A12L on users’ hand,

please refer to steps shown below to install QA-Tool Windows driver:

USB interface:

1. Connect DUT to PC/NB and check Windows Device Manager.

2. Window Device Manager would discover DUT shows “Generic Bluetooth Adapter”(BT device) and

“WiFi_If”(WiFi device).

3. Right click the “Generic Bluetooth Adapter” BT device and select disable as follows.

MT7922A22M

SW Tool AN: Part-I

Confidential B

This document contains information that is proprietary to MediaTek Inc.

Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited.

4. Right-click on “WiFi_If” Wifi device and Update Driver Software.

5. According user’s Windows’ OS to select and install test tool driver.

MT7922A22M

SW Tool AN: Part-I

Confidential B

This document contains information that is proprietary to MediaTek Inc.

Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited.

MT7922A22M

SW Tool AN: Part-I

Confidential B

This document contains information that is proprietary to MediaTek Inc.

Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited.

3 General Information & Integration Instructions

3.1 General Description of MT7922A12L

Product

2TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card

Brand

MediaTek

Model

MT7922A12L

Power Supply

ating

3.3Vdc from host equipment

Modulation Type

GFSK, π/4-DQPSK, 8DPSK for FHSS

CCK, DQPSK, DBPSK for DSSS

256QAM, 64QAM, 16QAM, BPSK, QPSK for OFDM

1024QAM, 256QAM, 64QAM, 16QAM, QPSK, BPSK for OFDM

Modulation Technology

BT EDR:

FHSS

BT LE: GFSK

WLAN: DSSS, OFDM, OFDMA

Transfer Rate

BT EDR:

up to 3 Mbps

BT LE: up to 2 Mbps

802.11b: up to 11 Mbps

802.11g: up to 54 Mbps

802.11n: up to 300 Mbps

VHT20/40: up to 400 Mbps

802.11ax: up to 573.5 Mbps

802.11a: up to 54/48/36/24/18/12/9/6 Mbps

802.11n: up to 300 Mbps

802.11ac: up to 1733.3 Mbps

802.11ax: up to 2401.9 Mbps

Operating Frequency

BT EDR:

2402MHz ~ 2480MHz

BT LE: 2402MHz ~ 2480MHz

2.4GHz: 2.412 ~ 2.472GHz

5GHz: 5.18~5.32GHz, 5.50~5.72GHz, 5.745 ~ 5.825GHz

6GHz: 5.955~6.415GHz, 6.435~6.525GHz, 6.525~6.875GHz, 6.875~7.115GHz

Number of Channel

BT EDR:

BT LE: 40

2.4GHz:

802.11b, 802.11g, 802.11n (HT20), VHT20, 802.11ax (HE20): 13

802.11n (HT40), VHT40, 802.11ax (HE40): 9

5GHz:

5180~5320MHz

802.11a, 802.11n (HT20), 802.11ac (VHT20), 802.11ax (HE20): 8

802.11n (HT40), 802.11ac (VHT40), 802.11ax (HE40): 4

802.11ac (VHT80), 802.11ax (HE80): 2

802.11ac (VHT160), 802.11ax (HE160): 1

5500~5720MHz

802.11a, 802.11n (HT20), 802.11ac (VHT20), 802.11ax (HE20): 12

802.11n (HT40), 802.11ac (VHT40), 802.11ax (HE40): 6

802.11ac (VHT80), 802.11ax (HE80): 3

802.11ac (VHT160), 802.11ax (HE160): 1

5745~5825MHz

802.11a, 802.11n (HT20), 802.11ac (VHT20), 802.11ax (HE20): 5

802.11n (HT40), 802.11ac (VHT40), 802.11ax (HE40): 2

802.11ac (VHT80), 802.11ax (HE80): 1

6GHz :

802.11a/ax (HE20) : 59

802.11ax (HE40) : 29

MT7922A22M

SW Tool AN: Part-I

Confidential B

This document contains information that is proprietary to MediaTek Inc.

Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited.

802.11ax (HE80) : 14

802.11ax (HE160) : 7

3.2 Antenna information

The antennas mentioned below are covered in the certification scope and the HOST can only be used with

the following antennas:

Ant.

Set

RF Chain No.

Brand

Model Ant. Net Gain

(dBi) Freq. Range (GHz)

Ant. Type Connector

Type

Chain0 PSA RFMTA340718EMLB302 3.18

4.92

2.4~2.4835

5.15~5.85 PIFA i-pex(MHF)

Chain1 PSA RFMTA340718EMLB302 3.18

4.92

2.4~2.4835

5.15~5.85 PIFA i-pex(MHF)

Chain0 PSA RFMTA311020EMMB301

1.71

4.82

4.76

4.29

4.61

4.09

2.4~2.4835

5.15~5.85

5.925~6.425

6.425~6.525

6.525~6.875

6.875~7.125

PIFA i-pex(MHF)

Chain1 PSA RFMTA311020EMMB301

1.71

4.82

4.76

4.29

4.61

4.09

2.4~2.4835

5.15~5.85

5.925~6.425

6.425~6.525

6.525~6.875

6.875~7.125

PIFA i-pex(MHF)

Please note that the above antennas are custom made for MediaTek MT7922A12L module and are not listed

in Walsin Technology Corp standard catalogs. For the purchase of these antennas, please contact Walsin

Technology as listed below directly. Only the above antennas are tested for compliance with the FCC rules,

and all other antennas (even same type with lower gain) will require a re-assessment to be used with this

module.

Contact info for above certified antennas:

Company/Dept.: Walsin Technology Corp./ Antenna Business Dept.

Contact window: Andrew Lin

Tel: +886-3-475-8711 # 8172

Cell phone: +886-938-286-596

Email address: andrewlin@passivecomponent.com

URL link: http://www.passivecomponent.com/zh-hant/products/antenna/

MT7922A22M

SW Tool AN: Part-I

Confidential B

This document contains information that is proprietary to MediaTek Inc.

Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited.

3.3 Host Integration instructions

The product is designed to be used with “NGFF (Next Generation Form Factor) M.2 2230” PCIE Bus, please

install module into a M.2 2230 PCIE slot.

3.4 Host product testing guidance

HOST must follow the specific restrictions listed in “3.5 Regulatory notes” section below and section 3 of

KDB996369 D04 V02 Module Integration Guide v01, to verify that the host product meets all the applicable

rules.

MT7922A22M

SW Tool AN: Part-I

Confidential B

This document contains information that is proprietary to MediaTek Inc.

Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited.

Federal Communication Commission Interference Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

- Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible

for compliance could void the user's authority to operate this equipment.

This transmitter must not be co-located or operating in conjunction with any other antenna or

transmitter.

This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC

Rules.

Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with minimum distance 20cm

between the radiator & your body.

MT7922A22M

SW Tool AN: Part-I

Confidential B

This document contains information that is proprietary to MediaTek Inc.

Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited.

This module is intended for OEM integrators only. Per FCC KDB 996369 D03 OEM

Manual v01 guidance, the following conditions must be strictly followed when using this

certified module:

KDB 996369 D03 OEM Manual v01 rule sections:

2.2 List of applicable FCC rules

This module has been tested for compliance to FCC Part 15 Subpart C (15.247) and Subpart

E (15.407). Device is tested for compliance as a low power indoor client device within 5.925–

7.125 GHz band.

2.3 Summarize the specific operational use conditions

The module is tested for standalone mobile RF exposure use condition. Any other usage

conditions such as co-location with other transmitter(s) will need a separate reassessment

through a class II permissive change application or new certification.

This module is authorized for Low Power Indoor Client applications only; final host product

must be for indoor operations only.

Further operation restrictions on the host product include:

*Prohibited for control of or communications with unmanned aircraft systems, including

drones.*

2.4 Limited module procedures

Not applicable.

2.5 Trace antenna designs

Not applicable.

2.6 RF exposure considerations

This equipment complies with FCC mobile radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated with a minimum

distance of 20cm between the radiator & your body. A separate SAR/Power Density evaluation

is required to confirm compliance with relevant FCC portable RF exposure rules.

MT7922A22M

SW Tool AN: Part-I

Confidential B

This document contains information that is proprietary to MediaTek Inc.

Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited.

2.7 Antennas

The following antennas have been certified for use with this module; antennas of the

same type with equal or lower gain may also be used with this module except for

operations within the 5.925~7.125GHz band. Use of any other antenna with a lower or

higher gain in this band will require a separate reassessment through a Class II

Permissive Change application or new certification.

Ant.

Set RF Chain No.

Brand Model Ant. Net Gain

(dBi) Freq. Range (GHz) Ant. Type Connector

Type

Chain0 PSA RFMTA340718EMLB302 3.18

4.92

2.4~2.4835

5.15~5.85 PIFA i-pex(MHF)

Chain1 PSA RFMTA340718EMLB302 3.18

4.92

2.4~2.4835

5.15~5.85 PIFA i-pex(MHF)

Chain0 PSA RFMTA311020EMMB301

1.71

4.82

4.76

4.29

4.61

4.09

2.4~2.4835

5.15~5.85

5.925~6.425

6.425~6.525

6.525~6.875

6.875~7.125

PIFA i-pex(MHF)

Chain1 PSA RFMTA311020EMMB301

1.71

4.82

4.76

4.29

4.61

4.09

2.4~2.4835

5.15~5.85

5.925~6.425

6.425~6.525

6.525~6.875

6.875~7.125

PIFA i-pex(MHF)

IMPORTANT: The final host product must have an integral antenna which is not removable by

the end-user.

2.8 Label and compliance information

The final end product must be labeled in a visible area with the following: “Contains FCC ID:

RAS-MT7922A12L”. The grantee's FCC ID can be used only when all FCC compliance

requirements are met.

2.9 Information on test modes and additional testing requirements

This transmitter is tested in a standalone mobile RF exposure condition and any co-located or

simultaneous transmission with other transmitter(s) class II permissive change re-evaluation or

new certification.

2.10 Additional testing, Part 15 Subpart B disclaimer

This transmitter module is tested as a subsystem and its certification does not cover the FCC

Part 15 Subpart B (unintentional radiator) rule requirement applicable to the final host. The

final host will still need to be reassessed for compliance to this portion of rule requirements if

applicable.

MT7922A22M

SW Tool AN: Part-I

Confidential B

This document contains information that is proprietary to MediaTek Inc.

Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited.

As long as all conditions above are met, further transmitter test will not be required. However,

the OEM integrator is still responsible for testing their end-product for any additional

compliance requirements required with this module installed.

IMPORTANT NOTE: In the event that these conditions can not be met (for example certain

laptop configurations or co-location with another transmitter), then the FCC authorization is no

longer considered valid and the FCC ID can not be used on the final product. In these

circumstances, the OEM integrator will be responsible for re-evaluating the end product

(including the transmitter) and obtaining a separate FCC authorization.

Manual Information To the End User

The OEM integrator has to be aware not to provide information to the end user regarding how

to install or remove this RF module in the user’s manual of the end product which integrates

this module.

The end user manual shall include all required regulatory information/warning as show in this

manual.

OEM/Host manufacturer responsibilities

OEM/Host manufacturers are ultimately responsible for the compliance of the Host and

Module. The final product must be reassessed against all the essential requirements of the

FCC rule such as FCC Part 15 Subpart B before it can be placed on the US market. This

includes reassessing the transmitter module for compliance with the Radio and EMF essential

requirements of the FCC rules. This module must not be incorporated into any other device or

system without retesting for compliance as multi-radio and combined equipment.

MT7922A22M

SW Tool AN: Part-I

Confidential B

This document contains information that is proprietary to MediaTek Inc.

Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited.

Industry Canada statement:

This device complies with ISED’s licence-exempt RSSs. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

Le présent appareil est conforme aux CNR d’ ISED applicables aux appareils radio exempts de

licence. L’exploitation est autorisée aux deux conditions suivantes : (1) le dispositif ne doit pas

produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un

brouillage susceptible de provoquer un fonctionnement indésirable.

Radiation Exposure Statement:

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with greater than 20cm between the

radiator & your body.

Déclaration d'exposition aux radiations:

Cet équipement est conforme aux limites d'exposition aux rayonnements ISED établies pour un

environnement non contrôlé. Cet équipement doit être installé et utilisé à plus de 20 cm entre le

radiateur et votre corps.

This device is intended only for OEM integrators under the following conditions: (For module

device use)

1) The antenna must be installed and operated with greater than 20cm between the antenna and

users, and

2) The transmitter module may not be co-located with any other transmitter or antenna.

As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM

integrator is still responsible for testing their end-product for any additional compliance requirements

required with this module installed.

Cet appareil est conçu uniquement pour les intégrateurs OEM dans les conditions suivantes:

(Pour utilisation de dispositif module)

1) L'antenne doit être installé et exploité avec plus de 20 cm entre l'antenne et les utilisateurs, et

2) Le module émetteur peut ne pas être coïmplanté avec un autre émetteur ou antenne.

MT7922A22M

SW Tool AN: Part-I

Confidential B

This document contains information that is proprietary to MediaTek Inc.

Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited.

Tant que les 2 conditions ci-dessus sont remplies, des essais supplémentaires sur l'émetteur ne

seront pas nécessaires. Toutefois, l'intégrateur OEM est toujours responsable des essais sur son

produit final pour toutes exigences de conformité supplémentaires requis pour ce module installé.

IMPORTANT NOTE:

In the event that these conditions can not be met (for example certain laptop configurations or co-

location with another transmitter), then the Canada authorization is no longer considered valid and the

IC ID can not be used on the final product. In these circumstances, the OEM integrator will be

responsible for re-evaluating the end product (including the transmitter) and obtaining a separate

Canada authorization.

IMPORTANTENOTE

Dans le cas où ces conditions ne peuvent être satisfaites (par exemple pour certaines configurations

d'ordinateur portable ou de certaines co-localisation avec un autre émetteur), l'autorisation du Canada

n'est plus considéré comme valide et l'ID IC ne peut pas être utilisé sur le produit final. Dans ces

circonstances, l'intégrateur OEM sera chargé de réévaluer le produit final (y compris l'émetteur) et

l'obtention d'une autorisation distincte au Canada.

End Product Labeling

This transmitter module is authorized only for use in device where the antenna may be installed and

operated with greater than 20cm between the antenna and users. The final end product must be

labeled in a visible area with the following: “Contains IC:7542A-MT7922A12L”.

Plaque signalétique du produit final

Ce module émetteur est autorisé uniquement pour une utilisation dans un appareil où l’antenne peut

être installée et utilisée à plus de 20 cm entre l’antenne et les utilisateurs. Le produit final doit être

étiqueté dans un endroit visible avec l'inscription suivante: "Contient des IC: 7542A-MT7922A12L

Manual Information To the End User

The OEM integrator has to be aware not to provide information to the end user regarding how to

install or remove this RF module in the user’s manual of the end product which integrates this module.

The end user manual shall include all required regulatory information/warning as show in this manual.

Manuel d'information à l'utilisateur final

L'intégrateur OEM doit être conscient de ne pas fournir des informations à l'utilisateur final quant à la

façon d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui

intègre ce module.

Le manuel de l'utilisateur final doit inclure toutes les informations réglementaires requises et

avertissements comme indiqué dans ce manuel.

MT7922A22M

SW Tool AN: Part-I

Confidential B

This document contains information that is proprietary to MediaTek Inc.

Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited.

Caution :

(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential

for harmful interference to co-channel mobile satellite systems;

(ii) for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the

bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the

e.i.r.p. limit;

(iii) for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the

band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits as

appropriate;

(iv) where applicable, antenna type(s), antenna models(s), and worst-case tilt angle(s) necessary to

remain compliant with the e.i.r.p. elevation mask requirement set forth in section 6.2.2.3 shall be

clearly indicated.

Avertissement:

Le guide d’utilisation des dispositifs pour réseaux locaux doit inclure des instructions précises sur les

restrictions susmentionnées, notamment :

(i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une

utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites

mobiles utilisant les mêmes canaux;

(ii) pour les dispositifs munis d’antennes amovibles, le gain maximal d’antenne permis pour les

dispositifs utilisant les bandes de 5 250 à 5 350 MHz et de 5 470 à 5 725 MHz doit être conforme à la

limite de la p.i.r.e;

(iii) pour les dispositifs munis d’antennes amovibles, le gain maximal d’antenne permis (pour les

dispositifs utilisant la bande de 5 725 à 5 850 MHz) doit être conforme à la limite de la p.i.r.e.

spécifiée, selon le cas;

(iv) lorsqu’il y a lieu, les types d’antennes (s’il y en a plusieurs), les numéros de modèle de l’antenne

et les pires angles d’inclinaison nécessaires pour rester conforme à l’exigence de la p.i.r.e. applicable

au masque d’élévation, énoncée à la section 6.2.2.3, doivent être clairement indiqués

La page charge ...

Mediatek MT7922A12L Mode d'emploi

Marque: Mediatek

Modèle: MT7922A12L

Taper: Mode d'emploi

Télécharger le PDF

rapport

dans d''autres langues

English: Mediatek MT7922A12L User guide

Mediatek MT7922A12L Mode d'emploi

Mediatek MT7922A12L Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents