YORKVILLE ES15P Manuel utilisateur

Marque
YORKVILLE
Modèle
ES15P
Catégorie
Équipement musical supplémentaire
Taper
Manuel utilisateur
SERVICE MANUAL
ES15P
SMT Disclaimer
Due to the complex nature of the use of SMT installed components
in Yorkville equipment, we highly caution all service technicians in
attempting to repair or replace SMT factory installed components.
Many of these components may be glued prior to initial soldering.
Replacing SMT components requires expensive
specialized de-soldering equipment and training.
Yorkville Sound will repair and replace defective SMT components
to ensure proper quality assurance and installation is maintained.
U.S.A.
Yorkville Sound Inc.
4625 Witmer Industrial Estate
Niagara Falls, New York
14305, USA
Voice: 716-297-2920
Fax: 716-297-3689
WORLD HEADQUARTERS
CANADA
Yorkville Sound Limited
550 Granite Court
Pickering, Ontario
L1W 3Y8 CANADA
Voice: 905-837-8481
Fax: 905-837-8746
Manual-Service-ES15P-00-1v0 • November 9, 2018
The exclamation point within an equilatereal triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
Le point d’exclamation à l’intérieur d’un triangle équilatéral est prévu pour alerter
l’utilisateur de la présence d’instructions importantes dans la littérature accompagnant
l’appareil en ce qui concerne l’opération et la maintenance de cet appareil.
This lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s enclosure that may be
of sufficient magnitude to constitute a risk of electric shock to persons.
Ce symbole d’éclair avec tête de flèche dans un triangle équilatéral est prévu pour alerter
l’utilisateur de la présence d’un «voltage dangereux» non-isolé à proximité de l’enceinte du
produit qui pourrait être d’ampleur suffisante pour présenter un risque de choque électrique.
DOC-Safety-5v0+UL60065-00-1v2 • May 31, 2018
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
THIS DEVICE IS FOR INDOOR USE ONLY!
Instructions pertaining to a risk of fire, electric shock, or injury to a person
Read Instructions: The Owner’s Manual should be read and understood before operation of your unit. Please, save these
instructions for future reference and heed all warnings.
Clean only with dry cloth.
Packaging: Keep the box and packaging materials, in case the unit needs to be returned for service.
Warning: To reduce the risk or fire or electric shock, do not expose this apparatus to rain or moisture. Do not
use this apparatus near water!
Warning: When using electric products, basic precautions should always be followed, including the following:
Power Sources
Your unit should be connected to a power source only of the voltage specified in the owners manual or as marked on the
unit. This unit has a polarized plug. Do not use with an extension cord or receptacle unless the plug can be fully inserted.
Precautions should be taken so that the grounding scheme on the unit is not defeated. An apparatus with CLASS I
construction shall be connected to a Mains socket outlet with a protective earthing ground. Where the MAINS plug or an
appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
Hazards
Do not place this product on an unstable cart, stand, tripod, bracket or table. The product may fall, causing serious personal
injury and serious damage to the product. Use only with cart, stand, tripod, bracket, or table recommended by the
manufacturer or sold with the product. Follow the manufacturer’s instructions when installing the product and use mounting
accessories recommended by the manufacturer. Only use attachments/accessories specified by the manufacturer
Note: Prolonged use of headphones at a high volume may cause health damage on your ears.
The apparatus should not be exposed to dripping or splashing water; no objects filled with liquids should be
placed on the apparatus.
Terminals marked with the “lightning bolt” are hazardous live; the external wiring connected to these terminals require
installation by an instructed person or the use of ready made leads or cords.
Ensure that proper ventilation is provided around the appliance. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
No naked flame sources, such as lighted candles, should be placed on the apparatus.
Power Cord
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the
other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your
safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. The AC supply
cord should be routed so that it is unlikely that it will be damaged. Protect the power cord from being walked on or pinched particularly
at plugs. If the AC supply cord is damaged DO NOT OPERATE THE UNIT. To completely disconnect this apparatus from the AC
Mains, disconnect the power supply cord plug from the AC receptacle. The mains plug of the power supply cord shall remain readily
operable.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Service
The unit should be serviced only by qualified service personnel. Servicing is required when the apparatus has been damaged in
any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
AVIS: AFIN DE REDUIRE LES RISQUE DE CHOC ELECTRIQUE, N’ENLEVEZ PAS LE COUVERT
(OU LE PANNEAU ARRIERE)
NE CONTIENT AUCUNE PIECE REPARABLE PAR L’UTILISATEUR.
CONSULTEZ UN TECHNICIEN QUALIFIE POUR L’ENTRETIENT
CE PRODUIT EST POUR L’USAGE À L’INTÉREUR SEULEMENT
Instructions relatives au risque de feu, choc électrique, ou blessures aux personnes
Veuillez Lire le Manuel: Il contient des informations qui devraient êtres comprises avant l’opération de votre appareil.
Conservez. Gardez S.V.P. ces instructions pour consultations ultérieures et observez tous les avertissements.
Nettoyez seulement avec le tissu sec.
Emballage: Conservez la boite au cas ou l’appareil devait être retourner pour réparation.
Avertissement: Pour réduire le risque de feu ou la décharge électrique, n'exposez pas cet appareil à la pluie ou à l'humidité.
N’utilisez pas cet appareil près de l’eau!
Attention: Lors de l’utilisation de produits électrique, assurez-vous d’adhérer à des précautions de bases incluant celle qui suivent:
Alimentation
L’appareil ne doit être branché qu’à une source d’alimentation correspondant au voltage spécifié dans le manuel ou tel
qu’indiqué sur l’appareil. Cet appareil est équipé d’une prise d’alimentation polarisée. Ne pas utiliser cet appareil avec un
cordon de raccordement à moins qu’il soit possible d’insérer complètement les trois lames. Des précautions doivent êtres
prises afin d’eviter que le système de mise à la terre de l’appareil ne soit désengagé. Un appareil construit selon les normes
de CLASS I devrait être raccordé à une prise murale d’alimentation avec connexion intacte de mise à la masse. Lorsqu’une
prise de branchement ou un coupleur d'appareils est utilisée comme dispositif de débranchement, ce dispositif de
débranchement devra demeurer pleinement fonctionnel avec raccordement à la masse.
Risque
Ne pas placer cet appareil sur un chariot, un support, un trépied ou une table instables. L’appareil pourrait tomber et blesser
quelqu’un ou subir des dommages importants. Utiliser seulement un chariot, un support, un trépied ou une table
recommandés par le fabricant ou vendus avec le produit. Suivre les instructions du fabricant pour installer l’appareil et utiliser
les accessoires recommandés par le fabricant. Utilisez seulement les attachements/accessoires indiqués par le fabricant
Note: L'utilisation prolongée des écouteurs à un volume élevé peut avoir des conséquences néfastes sur la santé
sur vos oreilles. .
Il convient de ne pas placer sur l’appareil de sources de flammes nues, telles que des bougies allumées.
L’appeil ne doit pas être exposé à des égouttements d’eau ou des éclaboussures et qu’aucun objet rempli de liquide tel
que des vases ne doit être placé sur l’appareil.
Assurez que lappareil est fourni de la propre ventilation. Ne procédez pas à l’installation près de source de chaleur tels
que radiateurs, registre de chaleur, fours ou autres appareils (incluant les amplificateurs) qui produisent de la chaleur.
Les dispositifs marqués d’une symbole “d’éclair” sont des parties dangereuses au toucher et que les câblages
extérieurs connectés à ces dispositifs de connection extérieure doivent être effectivés par un opérateur formé ou en
utilisant des cordons déjà préparés.
Cordon d’Alimentation
Ne pas enlever le dispositif de sécurité sur la prise polarisée ou la prise avec tige de mise à la masse du cordon d’alimentation.
Une prise polarisée dispose de deux lames dont une plus large que l’autre. Une prise avec tige de mise à la masse dispose de
deux lames en plus d’une troisième tige qui connecte à la masse. La lame plus large ou la tige de mise à la masse est prévu
pour votre sécurité. La prise murale est désuète si elle n’est pas conçue pour accepter ce type de prise avec dispositif de
sécurité. Dans ce cas, contactez un électricien pour faire remplacer la prise murale. Évitez d’endommager le cordon
d’alimentation. Protégez le cordon d’alimentation. Assurez-vous qu’on ne marche pas dessus et qu’on ne le pince pas en
particulier aux prises. N’UTILISEZ PAS L’APPAREIL si le cordon d’alimentation est endommagé. Pour débrancher
complètement cet appareil de l’alimentation CA principale, déconnectez le cordon d’alimentation de la prise d’alimentation
murale. Le cordon d’alimentation du bloc d’alimentation de l’appareil doit demeurer pleinement fonctionnel.
Débranchez cet appareil durant les orages ou si inutilisé pendant de longues périodes.
Service
Consultez un technicien qualifié pour l’entretien de votre appareil. L'entretien est nécessaire quand l'appareil a été endommagé de
quelque façon que se soit. Par exemple si le cordon d’alimentation ou la prise du cordon sont endommagés, si il y a eu du liquide
qui a été renversé à l’intérieur ou des objets sont tombés dans l'appareil, si l'appareil a été exposé à la pluie ou à l'humidité, si il ne
fonctionne pas normalement, ou a été échappé.
S2125A
CAUTION: HOT SURFACE
ATTENTION: SURFACE CHAUDE
IEC 60417-5041
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS (UL60065)
FOLLOW ALL INSTRUCTIONS SUIVEZ TOUTES LES INSTRUCTIONS
The Lightning Flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product enclosure that may be of sufficient magnitude to constitute a risk of shock to persons
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the product
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The wide blade or the third prongs are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit
from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
WARNING:
• To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture and objects filled with liquids, such as vases, should not be
placed on this apparatus.
• To completely disconnect this apparatus from the ac mains, disconnect the power supply cord plug from the ac receptacle.
• The mains plug of the power supply cord or appliance coupler shall remain readily accessible.
Le symbole représentant un éclair avec une flèche à l’intérieur d’un triangle équilatéral est utilisé pour prévenir l’utilisateur de la
présence d’une tension électrique dangereuse non isolée à l’intérieur de l’appareil. Cette tension est d’un niveau suffisamment
élevé pour représenter un risque d’électrocution
Le symbole représentant un point d’exclamation à l’intérieur d’un triangle équilatéral, signale à l’utilisateur la présence d’instructions
importantes relatives au fonctionnement et à l’entretien de l’appareil dans cette notice d’installation
1. Lisez ces instructions.
2. Conservez ces instructions.
3. Respecter tous les avertissements.
4. Suivez toutes les instructions.
5. N'utilisez pas l'appareil près de l'eau.
6. Nettoyer uniquement avec chiffon sec.
7. Ne bloquez pas les ouvertures de ventilation. Installer en suivant les instructions du fabricant.
8. Ne pas installer près des sources de chaleur telles que radiateurs, bouches de chaleur, four ou autres appareils (y compris les amplificateurs)
produisant de la chaleur.
9. N'annulez pas l'objectif sécuritaire de la fiche polarisée ou de la tige de mise à la terre. Une fiche polarisée possède deux lames avec une plus
large que l'autre. Une prise avec mise à la terre possède deux lames et une troisième tige. La lame large ou la troisième tige sont fournis pour
votre sécurité. Si la fiche n'entre pas dans votre prise, consultez un électricien pour remplacer la prise obsolète.
10. Protéger le cordon d'alimentation des piétinements ou pincements en particulier près des fiches, des prises de courant et au point de
sortie de l'appareil.
11. Utilisez uniquement les accessoires spécifiés par le fabricant.
12. Utiliser uniquement avec un charriot, stand, trépied ou une table spécifiée par le fabricant, ou vendus avec l'appareil.
13. Débranchez l'appareil durant un orage ou lorsqu'il reste inutilisé pendant de longues périodes de temps.
14. Confiez toute réparation à un technicien qualifié. Une réparation est nécessaire lorsque l'appareil a été endommagé de quelque façon que ce
soit; comme lorsque le cordon d'alimentation ou la fiche est endommagé, lorsque du liquide a été renversé ou des objets sont tombés à l'intérieur,
lorsque l'appareil a été exposé à la pluie ou l'humidité, ne fonctionne pas normalement, ou est tombé.
AVERTISSEMENT:
• Pour réduire les risques d'incendie ou de choc électrique, ne pas exposer cet appareil à la pluie ou à l'humidité et ne placez pas d’objets contenant
des liquides, tels que des vases, sur l’appareil.
• Pour isoler totalement cet appareil de l'alimentation secteur, débranchez totalement son cordon d'alimentation du réceptacle CA.
• La prise du cordon d’alimentation ou du prolongateur, si vous en utilisez un comme dispositif de débranchement, doit rester facilement accessible
CAUTION
TO PREVENT ELECTRIC SHOCK HAZARD,
DO NOT CONNECT TO MAINS POWER SUPPLY
WHILE GRILLE IS REMOVED.
AVIS
POUR PRÉVENIR LES RISQUES D'ÉLECTROCUTION,
NE PAS RACCORDER A L’ALIMENTATION ÉLECTRIQUE ALORS
QUE LA GRILLE EST RETIRÉE.
POWER
ON
PUSH
TO RESET
OFF
DESIGNED & MANUFACTURED BY
YORKVILLE SOUND • TORONTO, CANADA
STEREO ACTIVE SPEAKER CONFIG
*
INPUT Switch set to LINE
MIXER
ES15P
STEREO PASSIVE SPEAKER CONFIG
*
INPUT Switch set to SPKR
PWR AMP
ES15P #1 ES15P #2
*
INPUT Switch set to LINE
MIXER
STEREO ACTIVE SPEAKER CONFIG
ES15P #1 ES15P #2
INPUT OUTPUT
MONO BLEND*
INPUT
1
3
2
1
3
2
2
3
1
SUB
LEVEL
LINE / SPKR
Mode
DSP
HF ROLLOFF
17080
NOTES:
ALL LINK CONNECTIONS FUNCTION AS INPUTS OR OUTPUTS.
MONO BLEND INPUT IS DESIGNED TO PROPERLY SUM TWO LINE SOURCES
SUCH AS TWO CHANNELS FROM A MIXER OR A STEREO SOURCE
*
230V
50Hz
3,0A
120VAC
60Hz 6.0A
ES15P
A-Z1672 / 1v9
BLUETOOTH
CONTROL
Contains Transmitter Module FCC ID: WAP2011
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may
cause undesired operation.
ES15P
Yorkville
1800 WATT ACTIVE SUBWOOFER ENCLOSURE
TEMPX-MAX
ACTIVITY
CLIP
LIMIT
POWER
MONO BLEND INPUT
1
2
3
MODE
HI FREQ.
ROLLOFF
INPUT
MODE
LINE
SPKR
INPUT OUTPUT
SUB
LEVEL
12
dB
1.
2.
3.
Punchy
Smooth
Deep
Hz
WIRELESS
CONTROL
Bluetooth
TM
SMART
150
80
130
90
120
110
LED Flashing:
Ready to Connect
LED On:
Connected
Enable / Disable
Hold 4 sec. to reset
*
Controls may not reflect
the applied settings if Bluetooth
remote function is enabled.
*
*
*
Recommended for
élite speaker cabinets.
Line Level Sources Only!
0
NOTE: THE YORKVILLE APP IS NEEDED TO CONTROL FUNCTIONS
THROUGH BLUETOOTH
TM
AND IS NOT FOR STREAMING AUDIO!
ES12P ES15P ES18P
System Type
Rear Horn Loaded Subwoofer Rear Horn Loaded Subwoofer Rear Horn Loaded Subwoofer
Active or Passive Active Active Active
Program Power (watts)
1200 watts (1600 watts Peak) 1800 watts (3600 watts Peak) 1600 watts (3200 watts Peak)
Max SPL (dB) 135dB Peak (126dB Continuous) 138dB Peak (132dB Continuous) 140dB Peak (134dB Continuous)
Frequency Response (Hz +/- 3dB) 45 - 150 (Hz +/- 3dB) 45 - 150 (Hz +/- 3dB) 43 - 150 (Hz +/- 3dB)
LF Driver(s) 12-inch Cast Frame Woofer w/4-inch Voicecoil 15-inch Cast Frame Woofer w/4-inch Voicecoil 18-inch Cast Frame Woofer w/4-inch Voicecoil
LF Protection Thermal / Overcurrent (X-max) / Clip Thermal / Overcurrent (X-max) / Clip Thermal / Overcurrent (X-max) / Clip
Power Consumption (typ/max) 120V (4.0A / 5.6A), 230V (2.0A / 2.8A) 120V (5.5A / 6.9A), 230V (2.9A / 3.6A) 120V (4A /4.5A), 230V (2A / 2.3A)
In / Out Connections 1 x XLR Input 1 x XLR Input 1 x XLR Input
1 x XLR Mono Blend Input 1 x XLR Mono Blend Input 1 x XLR Mono Blend Input
1 x ¼-inch Link Input 1 x ¼-inch Link Input 1 x ¼-inch Link Input
1 x ¼-inch Link Output 1 x ¼-inch Link Output 1 x ¼-inch Link Output
1 x XLR Link Output 1 x XLR Link Output 1 x XLR Link Output
Level Controls Master - Sub Level Master - Sub Level Master
LED Indicators Power, Activity, Protection (Clip, X-Max, Temp) Power, Activity, Protection (Clip, X-Max, Temp) Power, Activity, Protection (Clip, X-Max, Temp)
Other Controls / Features Active Controls: Mode - 1 Punchy, 2 Smooth, 3 Deep Active Controls: Mode - 1 Punchy, 2 Smooth, 3 Deep Active Controls: Mode - 1 Punchy, 2 Smooth, 3 Deep
High Frequency Roll-off - 80Hz to 150 Hz High Frequency Roll-off - 80Hz to 150 Hz High Frequency Roll-off - 80Hz to 150 Hz
Wheels NONE 2 x Rear tilt-back 2 x Rear tilt-back
Bar Handles 1 x (Left Side ), 1 x (Right side) 1 x (Top Rear Edge ), 1 x (Bo 2 x top, 2 x bottom
Pole Mount Adapter (1 3/8-inch-3.5cm) 1 (Top) (1 3/8-inch-3.5cm) 1 (Top) (1 3/8-inch-3.5cm) 1 (Top) (1 3/8-inch-3.5cm)
Enclosure Materials 15mm (5/8inch) 11-ply Russian Birch 15mm (5/8inch) 11-ply Russian Birch 15mm (5/8inch) 11-ply Russian Birch
Covering / Finish Black Ultrathane Paint Black Ultrathane Paint Black Ultrathane Paint
Dimensions (DWH xbackW, inches) 17.7 x 17 x 27 21 x 18 x 32 24.64 x 22.86 x 34
Dimensions (DWH x backW, cm) 45 x 43 x 69 53.3 x 45.7 x 81.3 62.6 x 58 x 86.36
Weight (lbs/kg) 85/38.5 110 / 50 137 / 62
Specifications subject to change without notice
Specifications
ES12P ES15P ES18P
Type de Système Caisson de Basse à pavillon avec driver monté à l'arrière Caisson de Basse à pavillon avec driver monté à l'arrière Caisson de Basse à pavillon avec driver monté à l'arrière
Actif ou Passif Actif Actif Actif
Puissance Nominale (Watts) 1200 watts (1600 watts crête) 1800 watts (3600 watts crête) 1600 watts (3200 watts crête)
Max SPL (dB) 135dB crête (126dB Continu) 138dB crête (132dB Continu) 140dB crête (134dB Continu)
Réponse en Fréquence (Hz +/- 3dB)
45 - 150 (Hz +/- 3dB) 45 - 150 (Hz +/- 3dB) 43 - 150 (Hz +/- 3dB)
HP Basses Fréquences HP 12 pouces, Saladier en fonte, Bobine Mobile 4 pouces HP 15 pouces, Saladier en fonte, Bobine Mobile 4 pouces HP 18 pouces, Saladier en fonte, Bobine Mobile 4 pouces
Protection Basses Fréquences Thermique / Surintensité (X-max) / Clip Thermique / Surintensité (X-max) / Clip Thermique / Surintensité (X-max) / Clip
Consommation de Puissance (typ/max) 120V (4.0A / 5.6A), 230V (2.0A / 2.8A) 120V (5.5A / 6.9A), 230V (2.9A / 3.6A) 120V (4A /4.5A), 230V (2A / 2.3A)
Connexions Entrée / Sortie 1 x XLR Entrée 1 x XLR Entrée 1 x XLR Entrée
1 x XLR Entrée Mono Blend 1 x XLR Entrée Mono Blend 1 x XLR Entrée Mono Blend
1 x ¼-pouce Entrée Link 1 x ¼-pouce Entrée Link 1 x ¼-pouce Entrée Link
1 x ¼-pouce Sortie Link 1 x ¼-pouce Sortie Link 1 x ¼-pouce Sortie Link
1 x XLR Sortie Link 1 x XLR Sortie Link 1 x XLR Sortie Link
Commandes de Niveau Principale - Niveau du Subwoofer Master - Sub Level Principale
Indicateurs DEL Alimentation, Activité, Protection (Clip, X-Max, Temp) Alimentation, Activité, Protection (Clip, X-Max, Temp) Alimentation, Activité, Protection (Clip, X-Max, Temp)
Autres commandes / Caractéristiques Commandes Actives: Mode - 1 Punchy, 2 Smooth, 3 Deep Commandes Actives: Mode - 1 Punchy, 2 Smooth, 3 Deep Commandes Actives: Mode - 1 Punchy, 2 Smooth, 3 Deep
Pente d'Atténuation de hautes fréquences - 80Hz to 150 Hz Pente d'Atténuation de hautes fréquences - 80Hz to 150 Hz Pente d'Atténuation de hautes fréquences - 80Hz to 150 Hz
Roues Aucune 2 x à inclinaison arrière 2 x à inclinaison arrière
Poignés 1 x (Côté Gauche), 1 x (Côté Droit) 1 x (Dessus, Bord Arrière), 1 x (Dessous) 2 x Dessus, 2 x Dessous
Adaptateur de montage sur poteau (1 3/8-inch-3.5cm) 1 (Dessus) (1 3/8-pouce - 3.5cm) 1 (Dessus) (1 3/8-pouce - 3.5cm) 1 (Dessus) (1 3/8-pouce - 3.5cm)
Matériel de Construction 15mm (5/8 pouce) Bouleau Russe 11-plis 15mm (5/8 pouce) Bouleau Russe 11-plis 15mm (5/8 pouce) Bouleau Russe 11-plis
Finition Peinture noire d'Ultrathane Peinture noire d'Ultrathane Peinture noire d'Ultrathane
Dimensions (PLH x L arrière, pouces) 17.7 x 17 x 27 21 x 18 x 32 24.64 x 22.86 x 34
Dimensions (PLH x L arrière, cm) 45 x 43 x 69 53.3 x 45.7 x 81.3 62.6 x 58 x 86.36
Poids (livres/kg) 85/38.5 110 / 50 137 / 62
Spécifications sujettes à changement sans préavis
Spécifications
Block-Diag-ES_P-00-1v1
Block Diagram for ES Series Powered Subwoofers
ES12P
ES15
ES18P
ES21P
DESIGNED & MANUFACTURED BY YORKVILLE SOUND
MONO BLEND*
INPUT
1
3
2
1
3
2
2
3
1
SUB
LEVEL
LINE / SPKR
Mode
DSP
HF ROLLOFF
17080
NOTES:
ALL LINK CONNECTIONS FUNCTION AS INPUTS OR OUTPUTS.
MONO BLEND INPUT IS DESIGNED TO PROPERLY SUM TWO LINE SOURCES
SUCH AS TWO CHANNELS FROM A MIXER OR A STEREO SOURCE
*
BLUETOOTH
CONTROL
M1693 Parts Reference List 9/12/2018
REF YS # Description REF YS # Description REF YS # Description
AI-SUB
M1693-59 ES15P SUBAMP/SUPPLY PCB
D309
8085 ES1H 500V 1A0 D214 UPGT 8814
R260
4931 470K 5% THERMISTOR NTC 0805 SMT
C200
5979 100N 50V 5%CAP 0805 SMT X7R
F301
7895 FUSE SLOW 7A 125V SMT 6125
R261
7686 W100 274K 1% 0805 SMT RES
C202
5979 100N 50V 5%CAP 0805 SMT X7R
F302
7895 FUSE SLOW 7A 125V SMT 6125
R262
7686 W100 274K 1% 0805 SMT RES
C203
5979 100N 50V 5%CAP 0805 SMT X7R
HS1
4181 TO220 THERMO PAD CERAMIC .080 THK
R263
7627 W100 13K 1% 0805 SMT RES
C204
5979 100N 50V 5%CAP 0805 SMT X7R
HS2
4181 TO220 THERMO PAD CERAMIC .080 THK
R264
9107 W125 1K4 1% 0805 SMT RES
C205
5979 100N 50V 5%CAP 0805 SMT X7R
HS3
Z1611 ES18P/ES15P HEAT SPREADER
R265
8213 W250 330R 5% 1206 SMT RES
C206
5979 100N 50V 5%CAP 0805 SMT X7R
HW1
8871 4-40X5/8 PAN PHILIPS MS BO&W
R266
7611 1W00 100K 5% 2512 SMT RES
C207
5979 100N 50V 5%CAP 0805 SMT X7R
HW2
8902 4-40X3/4 PAN PHILIPS MS TBZ
R267
7611 1W00 100K 5% 2512 SMT RES
C208
5979 100N 50V 5%CAP 0805 SMT X7R
HW4
8485 #6 SPLIT WASHER ZINC
R268
8189 W125 4K02 0.1% 0805 SMT RES
C209
5979
100N 50V 5%CAP 0805 SMT X7R
HW5
3501 #4 B52200F006 COMP WASH SMALL
R301
7902 1W00 1K8 5% 2512 SMT RES
C210
5979 100N 50V 5%CAP 0805 SMT X7R
HW6
8742 4-40X3/8 PAN PH TAPTITE BO&W
R303
6664 10W0 25K 5% BLK RES
C211
5979 100N 50V 5%CAP 0805 SMT X7R
HW7
8761 6-32X1/2 PAN PHIL MS ZINC CLEA
R304
6664 10W0 25K 5% BLK RES
C212
5979 100N 50V 5%CAP 0805 SMT X7R
HW8
8800 6-32 KEPS NUT ZINC
U200
6668 LTV-8141S ACINPUT OPTOCOUPLER SMT
C213
7603 680P 50V 5%CAP 0805 SMT C0G
HW9
8871 4-40X5/8 PAN PHILIPS MS BO&W
U201
7851 LM311 COMPARATOR IC SMT SO-8
C214
7736 470N 50V 5%CAP 1206 SMT X7R
HW10
8902 4-40X3/4 PAN PHILIPS MS TBZ
U202
7851 LM311 COMPARATOR IC SMT SO-8
C215
7769 __1U 50V 20%CAP 4.3X3.9 SMT ELC
HW11
8837 6-32 X 1/2 PAN PHILIP MS TBZ
U203
6686 IRS21844SPBF IC HILO FET DRVR SO14
C216
7878 __1U 25V 20%CAP 1206 SMT X7R
HW12
8800 6-32 KEPS NUT ZINC
U204
7817 33078 DUAL OPAMP SMT SO-8
C217
7871 470P 50V 5%CAP 0603 SMT NPO
HW13
8701 4-40 KEPS NUT ZINC
U205
7817 33078 DUAL OPAMP SMT SO-8
C218
7693 __1N 50V 5%CAP 0805 SMT NPO
HW14
8701 4-40 KEPS NUT ZINC
U206
8163 TL331 COMPARATOR IC SMT SOT235
C219
5972 680N 400V 5%CAP BLK RAD POLY FLM
HW15
8701 4-40 KEPS NUT ZINC
U207
8211 LNK302G OFFLINE SWITCH SMT SMD8B
C220
7601 220N 50V 10%CAP 1206 SMT X7R
HW16
8701 4-40 KEPS NUT ZINC
U302
6856 NJM7815FA TO220 P 15V0 REG IS V1
C221
7875 100N 100V 10%CAP 1206 SMT X7R
HW17
8485 #6 SPLIT WASHER ZINC
U303
6857 NJM7915FA TO220 N 15V0 REG IS V2
C222
5951 __3U3 450DC10%CAP BLK MPOLYP FLM
HW18
3501 #4 B52200F006 COMP WASH SMALL
W201
2328 8 CIR XH-HEADER 0.098IN
C223
5962 __2U2 140AC10%CAP BLK RAD POLYP FLM
L200
6663 _533UH CHOKE 120T19AWG/77908CORE
W301
4147 6 PIN POWER PIN HEADER MALE POLZED
C224
7769 __1U 50V 20%CAP 4.3X3.9 SMT ELC
L202
7974 1000UH 10% COIL 12MM SMT
W302
4162 2 PIN POWER PIN HEADER MALE POLZED
C225
7871 470P 50V 5%CAP 0603 SMT NPO
L300
3817 _1.5MH COIL INPUT COM MODE
W304
4146 3 PIN POWER PIN HEADER MALE POLZED
C226
8176 _47N 100V 10%CAP 1206 SMT X7R
L401
2906 486UH COIL COMMON MODE 8A SMT
W306
4147 6 PIN POWER PIN HEADER MALE POLZED
C227
5979 100N 50V 5%CAP 0805 SMT X7R
M1693
7882 W250 0R 1206 SMT RES
W307
4151 4 PIN POWER PIN HEADER MALE POLZED
C228
5972 680N 400V 5%CAP BLK RAD POLY FLM
Q200
8165 MMBTA92 PNP SOT-23 SMT
W402
4215 _4 PIN POWER VH MALE .156 10A
C229
5221 470P 1000V 5%CAP POLYPROP BULK
Q201
7806 MMBF4391LT1 NCH JFET SOT-23 SMT T&R
ZD200
7832 MM3Z18VT1G 18V0 0W2 5% SMT ZEN
C230
7813 _47P 50V 5%CAP 0805 SMT NPO
Q203
2496 IRGP50B60PD1PBF T0247 NPN IGBT T
C231
5979 100N 50V 5%CAP 0805 SMT X7R
Q204
8165 MMBTA92 PNP SOT-23 SMT
C232
7917 _33U 25V 20%CAP 6.3X5.5 SMT EL
Q205
2496 IRGP50B60PD1PBF T0247 NPN IGBT T
C233
5979 100N 50V 5%CAP 0805 SMT X7R
R200
7821 W125 10R0 1% 0805 SMT RES
C234
5979 100N 50V 5%CAP 0805 SMT X7R
R201
7761 W100 12K1 1% 0603 SMT RES
C235
7969 _10U 10V 20%CAP 0805 SMT Y5V
R202
7821 W125 10R0 1% 0805 SMT RES
C236
5979 100N 50V 5%CAP 0805 SMT X7R
R203
7625 W100 10K0 1% 0805 SMT RES
C237
7878 __1U 25V 20%CAP 1206 SMT X7R
R204
7761 W100 12K1 1% 0603 SMT RES
C238
7735 __4U7 50V 10%CAP 1210 SMT CER
R206
7864 W125 100K 5% 0805 SMT RES
C239
5270 __2U2 250V 20%CAP BLK RAD .1EL
R207
7859 W125 2K2 5% 0805 SMT RES
C241
7735 __4U7 50V 10%CAP 1210 SMT CER
R208
7688 W125 4M7 5% 0805 SMT RES
C242
7738 _10U0 16V 10%CAP 1206 SMT X7R
R209
7864 W125 100K 5% 0805 SMT RES
C301
7875 100N 100V 10%CAP 1206 SMT X7R
R210
7680 W100 6K98 1% 0805 SMT RES
C302
5242 100N 250V 20%CAP BLK 'X2' 15MM AC
R212
7625 W100 10K0 1% 0805 SMT RES
C303
5887 2200U 50V 20%CAP BLK 18X27MM EL
R213
7630 W100 182K 1% 0805 SMT RES
C304
7886 __4U7 25V 20%CAP 4X5.5 SMT ELC
R214
7860 W125 4K7 5% 0805 SMT RES
C305
5266 680N 250V 20%CAP BLK 'X2' 27MM AC
R215
7824 W125 47K5 1% 0805 SMT RES
C306
7875 100N 100V 10%CAP 1206 SMT X7R
R218
8321 W125 8K66 1% 0805 SMT RES
C307
5887 2200U 50V 20%CAP BLK 18X27MM EL
R219
7673 W100 475R 1% 0805 SMT RES
C308
7886 __4U7 25V 20%CAP 4X5.5 SMT ELC
R221
7856 W125 470R 5% 0805 SMT RES
C309
6451 __4N7 250V 20%CAP BLK 'Y' 10MM AC
R222
7625 W100 10K0 1% 0805 SMT RES
C310
7875 100N 100V 10%CAP 1206 SMT X7R
R223
7680 W100 6K98 1% 0805 SMT RES
C311
5934 2700U 250V 20%CAP BLK 40X60MM 4PS
R224
7854 W125 47R 5% 0805 SMT RES
C312
5934 2700U 250V 20%CAP BLK 40X60MM 4PS
R225
7852 W250 10R 5% 1206 SMT RES
C313
5934 2700U 250V 20%CAP BLK 40X60MM 4PS
R226
7628 W100 15K0 1% 0805 SMT RES
C314
5934 2700U 250V 20%CAP BLK 40X60MM 4PS
R227
7622 W100 1M0 1% 0805 SMT RES
C401
5982 150P 1000V 5%CAP 1206 SMT C0G
R228
7852 W250 10R 5% 1206 SMT RES
C402
5982 150P 1000V 5%CAP 1206 SMT C0G
R229
7680 W100 6K98 1% 0805 SMT RES
D200
7750 CDSF4148 75V 0A15 1005 SMT
R230
8189 W125 4K02 0.1% 0805 SMT RES
D201
8164 BZX84C22 22V0 0W3 5% SMT ZEN
R231
7621 W100 1K0 1% 0805 SMT RES
D203
9106 BAT750 SOT-23 SMT SCHTKY
R232
7621 W100 1K0 1% 0805 SMT RES
D204
8085 ES1H 500V 1A0 D214 UPGT 8814
R233
7680 W100 6K98 1% 0805 SMT RES
D205
8085 ES1H 500V 1A0 D214 UPGT 8814
R234
7630 W100 182K 1% 0805 SMT RES
D206
9106 BAT750 SOT-23 SMT SCHTKY
R236
7680 W100 6K98 1% 0805 SMT RES
D207
7750 CDSF4148 75V 0A15 1005 SMT
R237
7802 1W00 1R0 5% 2512 SMT RES
D208
8085 ES1H 500V 1A0 D214 UPGT 8814
R238
7624 W100 100R 1% 0805 SMT RES
D209
7619 BZX84C43 43V0 0W3 5% SMT ZEN
R240
7856 W125 470R 5% 0805 SMT RES
D210
7848 MURA240T3 400V 2A DIO 403D SMT
R241
8183 1W00 2R0 1% 2512 SMT RES
D211
7848 MURA240T3 400V 2A DIO 403D SMT
R242
5079 2W00 0R02 1% OARS SMT RES
D212
8085 ES1H 500V 1A0 D214 UPGT 8814
R247
7860 W125 4K7 5% 0805 SMT RES
D213
7617 BZX84C15LT1 15V0 0W225 ZEN SOT23
R248
8183 1W00 2R0 1% 2512 SMT RES
D214
7750 CDSF4148 75V 0A15 1005 SMT
R249
7852 W250 10R 5% 1206 SMT RES
D300
6852 BRIDGE 45A 600V WIRE LEAD SIP
R250
7852 W250 10R 5% 1206 SMT RES
D301
8085 ES1H 500V 1A0 D214 UPGT 8814
R251
7860 W125 4K7 5% 0805 SMT RES
D302
8130 MURS120T3 200V 1A DIO DO214AA SMT
R252
7622 W100 1M0 1% 0805 SMT RES
D304
8085 ES1H 500V 1A0 D214 UPGT 8814
R255
7703 W125 82K5 1% 0805 SMT RES
D305
8130 MURS120T3 200V 1A DIO DO214AA SMT
R256
7703 W125 82K5 1% 0805 SMT RES
D306
8130 MURS120T3 200V 1A DIO DO214AA SMT
R257
7860 W125 4K7 5% 0805 SMT RES
D307
8130 MURS120T3 200V 1A DIO DO214AA SMT
R258
7634 W100 20K5 1% 0805 SMT RES
D308
8085 ES1H 500V 1A0 D214 UPGT 8814
R259
7630 W100 182K 1% 0805 SMT RES
M1696 Parts Reference List 9/12/2018
REF YS # Description REF YS # Description REF YS # Description
AI-ASS
M1696-59
ES12P/ES15P/ES18P INPUT/DSP PCB
P5
2339 _10K B LIN 12MM DUAL 21DET P34
TP15
8002 TEST POINT MINIATURE SMT
C1
7878 __1U 25V 20%CAP 1206 SMT X7R
R1
7854 W125 47R 5% 0805 SMT RES
U1
6793 PROC4 BLE MODULE 14X19MM SMT
C2
7767 100N 16V 10%CAP 0603 SMT X7R
R2
7638 W100 3K74 1% 0805 SMT RES
U2
7719 MC33063ADR BUCK/BOOST INV IC SO8
C3
7878 __1U 25V 20%CAP 1206 SMT X7R
R3
7675 W125 1K21 1% 0805 SMT RES
U3
6670 AK4558 32BIT CODEC SMT QFN28
C4
7767 100N 16V 10%CAP 0603 SMT X7R
R4
8027 W125 37K4 1% 0805 SMT RES
U4
6667 MK10DN512VLK10 100MHZ MCU IC LQFP80
C5
7878 __1U 25V 20%CAP 1206 SMT X7R
R5
5066 W125 22K1 1% 0805 SMT RES
U5
7012 LP2950-33 LDRP TO92 FIXED 3V3 REG
C6
5669 470U 6V3 20%CAP RAD EL T&R
R6
7928 W125 10K00 0.1% 0805 SMT RES
U6
7012 LP2950-33 LDRP TO92 FIXED 3V3 REG
C7
5945 _10U 63V 20%CAP T&R RAD .2EL
R7
7820 W100 499R 1% 0805 SMT RES
U7
7669 TL072 DUAL OPAMP SMT SO-8
C8
5945 _10U 63V 20%CAP T&R RAD .2EL
R8
7820 W100 499R 1% 0805 SMT RES
U8
7669 TL072 DUAL OPAMP SMT SO-8
C9
5233 330N 63V 5%CAP T&R RAD .2FLM
R9
7820 W100 499R 1% 0805 SMT RES
U9
7669 TL072 DUAL OPAMP SMT SO-8
C10
5233 330N 63V 5%CAP T&R RAD .2FLM
R10
7858 W125 1K5 5% 0805 SMT RES
U10
6694 AT25010B EEPROM 1K SMT IC SO8
C11
5212 100N 63V 5%CAP T&R RAD .2FLM
R11
7856 W125 470R 5% 0805 SMT RES
W1
4183 10 CIR DUAL ROW HDR 0.05 SPC SMT
C12
5979 100N 50V 5%CAP 0805 SMT X7R
R12
7928 W125 10K00 0.1% 0805 SMT RES
W2
2328 8 CIR XH-HEADER 0.098IN
C13
5979 100N 50V 5%CAP 0805 SMT X7R
R13
7708 W100 200R 1% 0805 SMT RES
W3
4183 10 CIR DUAL ROW HDR 0.05 SPC SMT
C14
5979 100N 50V 5%CAP 0805 SMT X7R
R14
7854 W125 47R 5% 0805 SMT RES
X1
6543 48R 265V RESETTABLE THERMISTOR PTC
C15
5979 100N 50V 5%CAP 0805 SMT X7R
R15
7849 W250 0R27 5% 1206 SMT RES
ZD1
7832 MM3Z18VT1G 18V0 0W2 5% SMT ZEN
C16
5212 100N 63V 5%CAP T&R RAD .2FLM
R16
7676 W100 2K0 1% 0805 SMT RES
ZD2
7832 MM3Z18VT1G 18V0 0W2 5% SMT ZEN
C17
7738 _10U0 16V 10%CAP 1206 SMT X7R
R17
7676 W100 2K0 1% 0805 SMT RES
C18
7969 _10U 10V 20%CAP 0805 SMT Y5V
R18
7624 W100 100R 1% 0805 SMT RES
C19
5979 100N 50V 5%CAP 0805 SMT X7R
R19
7781 W063 49R9 1% 0603 SMT RES
C20
5979 100N 50V 5%CAP 0805 SMT X7R
R20
7854 W125 47R 5% 0805 SMT RES
C21
5979 100N 50V 5%CAP 0805 SMT X7R
R21
7899 W125 1K800 0.1% 0805 SMT RES
C22
7878 __1U 25V 20%CAP 1206 SMT X7R
R22
8135 W125 47K 5% 0805 SMT RES
C23
5979 100N 50V 5%CAP 0805 SMT X7R
R23
8135 W125 47K 5% 0805 SMT RES
C24
7878 __1U 25V 20%CAP 1206 SMT X7R
R24
7928 W125 10K00 0.1% 0805 SMT RES
C25
5979 100N 50V 5%CAP 0805 SMT X7R
R25
7928 W125 10K00 0.1% 0805 SMT RES
C26
7878 __1U 25V 20%CAP 1206 SMT X7R
R27
7820 W100 499R 1% 0805 SMT RES
C27
7878
__1U 25V 20%CAP 1206 SMT X7R
R28
7625 W100 10K0 1% 0805 SMT RES
C28
5979 100N 50V 5%CAP 0805 SMT X7R
R30
7632 W100 2K32 1% 0805 SMT RES
C29
5979 100N 50V 5%CAP 0805 SMT X7R
R31
7928 W125 10K00 0.1% 0805 SMT RES
C30
5979 100N 50V 5%CAP 0805 SMT X7R
R32
7928 W125 10K00 0.1% 0805 SMT RES
C32
7871 470P 50V 5%CAP 0603 SMT NPO
R33
7624 W100 100R 1% 0805 SMT RES
C33
8178 470P 250V 5%CAP 0603 SMT NP0
R35
7671 W125 249R0 1% 0805 SMT RES
C34
5979 100N 50V 5%CAP 0805 SMT X7R
R37
7624 W100 100R 1% 0805 SMT RES
C35
7878 __1U 25V 20%CAP 1206 SMT X7R
R38
7624 W100 100R 1% 0805 SMT RES
C36
7878 __1U 25V 20%CAP 1206 SMT X7R
R40
7745 W125 0R 5% 0805 SMT RES
C37
8178 470P 250V 5%CAP 0603 SMT NP0
R42
7899 W125 1K800 0.1% 0805 SMT RES
C38
5979 100N 50V 5%CAP 0805 SMT X7R
R44
7860 W125 4K7 5% 0805 SMT RES
C39
5979 100N 50V 5%CAP 0805 SMT X7R
R45
7854 W125 47R 5% 0805 SMT RES
C41
5212 100N 63V 5%CAP T&R RAD .2FLM
R46
7676 W100 2K0 1% 0805 SMT RES
C42
5212 100N 63V 5%CAP T&R RAD .2FLM
R47
8189 W125 4K02 0.1% 0805 SMT RES
C43
8253 20P 100V 5%CAP 0805 SMT NPO
R48
7951 W125 750R 1% 0805 SMT RES
C44
8253 20P 100V 5%CAP 0805 SMT NPO
R49
7951 W125 750R 1% 0805 SMT RES
C45
8253 20P 100V 5%CAP 0805 SMT NPO
R51
7854 W125 47R 5% 0805 SMT RES
C46
7878 __1U 25V 20%CAP 1206 SMT X7R
R52
7857 W125 560R 5% 0805 SMT RES
C47
5979 100N 50V 5%CAP 0805 SMT X7R
R53
7676 W100 2K0 1% 0805 SMT RES
C48
7738 _10U0 16V 10%CAP 1206 SMT X7R
R54
8189 W125 4K02 0.1% 0805 SMT RES
C55
7811 100U 25V 20%CAP 8X5.4 SMT ELE
R55
7857 W125 560R 5% 0805 SMT RES
C134
5979 100N 50V 5%CAP 0805 SMT X7R
R56
7708 W100 200R 1% 0805 SMT RES
C135
5979 100N 50V 5%CAP 0805 SMT X7R
R57
5068 W125 187K 0.1% 0805 SMT RES
D1
6657 B160-13-F 60V 1A0 SCH DO214AC SMT
R58
5068 W125 187K 0.1% 0805 SMT RES
D2
7750 CDSF4148 75V 0A15 1005 SMT
R59
7820 W100 499R 1% 0805 SMT RES
D3
7750 CDSF4148 75V 0A15 1005 SMT
R107
5066 W125 22K1 1% 0805 SMT RES
D10
7750 CDSF4148 75V 0A15 1005 SMT
R117
5067 W125 31K6 0.1% 0805 SMT RES
D11
7750 CDSF4148 75V 0A15 1005 SMT
R164
7858 W125 1K5 5% 0805 SMT RES
D39
7750 CDSF4148 75V 0A15 1005 SMT
R165
5067 W125 31K6 0.1% 0805 SMT RES
D40
7750 CDSF4148 75V 0A15 1005 SMT
R176
7637 W125 3K32 1% 0805 SMT RES
J1
4140 XLR MALE PCB MT VERT 24MM A-SERIES
R177
7864 W125 100K 5% 0805 SMT RES
J2
4010 XLR FEML PCB MT VERT 24MM AA-SERIES
R180
5067 W125 31K6 0.1% 0805 SMT RES
J3
4063 1/4IN ISO JCK PCMT VT STER RT SWT
R181
5067 W125 31K6 0.1% 0805 SMT RES
J5
4010 XLR FEML PCB MT VERT 24MM AA-SERIES
S1
4202 SP3T NONSHORTING VERT ROT SWT 3POS
J7
4063 1/4IN ISO JCK PCMT VT STER RT SWT
S2
3439 DPDT MINI PC VERT MOMENTARY
L1
8256 FERRITE BEAD 600R @100MHZ 0805 SMT
S3
3522 DPDT MINI PC VERT SNP ALT
L2
7967 _15.0UH COIL 0805 SMT
S4
4221 SP7T NONSHORTING VERT ROT SWT 7POS
L3
8152 220UH COIL 10X10MM SMT
SPC1
4007 .9 LED CUSTOM SPACER
L6
7941 __8.2UH COIL 1210 SMT
SPC2
4007 .9 LED CUSTOM SPACER
L7
7941 __8.2UH COIL 1210 SMT
SPC3
4007 .9 LED CUSTOM SPACER
L10
7967 _15.0UH COIL 0805 SMT
SPC4
4007 .9 LED CUSTOM SPACER
L11
7967 _15.0UH COIL 0805 SMT
SPC5
4007 .9 LED CUSTOM SPACER
L12
7967 _15.0UH COIL 0805 SMT
SPC6
4007 .9 LED CUSTOM SPACER
L25
7967 _15.0UH COIL 0805 SMT
TP1
8002 TEST POINT MINIATURE SMT
LD1
6408 GRN 3MM LED 2V2 20MA DIFFUSD
TP2
8002 TEST POINT MINIATURE SMT
LD2
6400 YEL 3MM LED 2V1 20MA DIFFUSD
TP3
8002 TEST POINT MINIATURE SMT
LD3
6405 RED 3MM LED 2V1 20MA DIFFUSD
TP7
8002 TEST POINT MINIATURE SMT
LD4
6400 YEL 3MM LED 2V1 20MA DIFFUSD
TP8
8002 TEST POINT MINIATURE SMT
LD5
6390 BLUE 3MM LED 2V6 LOW CURRENT 2MA
TP9
8002 TEST POINT MINIATURE SMT
LD6
6408 GRN 3MM LED 2V2 20MA DIFFUSD
TP10
8002 TEST POINT MINIATURE SMT
P1
4526 _10K TRIM POT 6MM TOP ADJ RAD
TP12
8002 TEST POINT MINIATURE SMT
P2
4526 _10K TRIM POT 6MM TOP ADJ RAD
TP13
8002 TEST POINT MINIATURE SMT
P3
4526 _10K TRIM POT 6MM TOP ADJ RAD
TP14
8002 TEST POINT MINIATURE SMT
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
17
K K
J J
I I
H H
G G
F F
E E
D D
C C
B B
A A
Power Supply
Section:
Product(s):
Supply.SCHDOC
X8024 3 4Sheet OfPCB# Rev#
Date Modified:
V01
Filename:3/30/2017
ES15P/ES18P/PSA1S/PSA2S
BOM Rev# 01
ES1H
D304
6
1
W306A
6
4
W306D
6
2
W301B
6
5
W301E
YEL/BLK
150 C
BLU
4
4
W307D
4
1
W307A
1W00
1K8
2512
R301
6
6
W306F
6
5
W306E
6
1
W301A
120V
6
3
W301C
6
4
W301D
6
6
W301F
WHT
BRN
BLK
3
2
W304B
3
3
W304C
3
1
W304A
ES1H
D301
7A
7895
F302
50V2200U
18X27MM
C307
25V4U7
4X4mm
C308
240V
6
2
W306B
6
3
W306C
4
2
W307B
4
3
W307C
7A
7895
F301
50V2200U
18X27MM
C303
100V
100N
1206
C301
25V4U7
4X4mm
C304
CON_HOLE_189
1
EC3
VIO
GRY
RED
YEL
RED
GRY
VIO
100V
100N
1206
C310
250V4N7
Y 10MM
C309
MURS120T3
DO214AA
D306
MURS120T3
DO214AA
D307
MURS120T3
DO214AA
D302
100V
100N
1206
C306
TO POWER AMP PCB
250V100N
X2 18MM
C302
250V680N
X2 30MM
C305
MURS120T3
DO214AA
D305
1
2
3
4
6
5
POWER SUPPLY
SILENT
250V
2700U
5934
C312
250V
2700U
5934
C311
+Hi
-Hi
-15V
+15V
PSGND
IEC_RECT
DPDT S itch
S301
3
2
1
3575
2
3
4
1
4096
Circ it Brea er
10A
S300
BLK BLK
BLK
WHT WHT
10W0
25K
.
R303
2
2
W302B
2
1
W302A
BRIDGE
SIP
600V
45A
D300
6852
PSGND
NJM7915FA
6857
IN
REF
OUT
U303
NJM7815FA
6856
IN
REF
OUT
U302
N1301
N1302
N1304
N1305
N1306
N1307
N1308
N1309
N1310
N1311
N1312
N1313
N1314
N1315
N1316
XFMR-SEC-HI
XFMR-SEC
AC IN
POWER
CON_HOLE_189
1
EC4
CHASSIS GND
AC BOARD
CHASSIS GND
POWER BOARD
2700U
5934
250V
C313
2700U
5934
250V
C314
10W0
.
25K
R304
DO-214AC
ES1H
D308
DO-214AC
ES1H
D309
1500UH
3817
L300
+31V
-31V
CH1422U PSA1S
CH1426U ES15P
CH1423U ES18P
CH1426U PSA2S
M1693-ES15P
+175V PSA1S
+202V ES15P
+205V ES18P
+202V PSA2S
-175V PSA1S
-202V ES15P
-205V ES18P
-202V PSA2S
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
17
K K
J J
I I
H H
G G
F F
E E
D D
C C
B B
A A
Design Information And History
Section:
Product(s):
History.SchDoc
X8024 2 3
Sheet OfPCB#: Rev#:
Modified:
V01
File:3/30/2017
ES15P/ES18P/PSA1S/PSA2S
EML Rev#:
01
Tmp Rev: V028
CHANGE HISTORY POTENTIOMETERS AND KNOBS
PINOUT DIAGRAMS
DESIGN HISTORY AND INFORMATION
THIS SHEET CONTAINS A CHANGE HISTORY LOG, A LIST OF THE POTS & KNOBS AND A LEADS & PINS REFERENCE SECTION.
.V01 .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
27-OCT-2016
13
10
7
4
1
9
11
12
8
#
2
3
5
6
VER#DATE DESCRIPTION OF CHANGE
.
.
.
.
.
.
.
.
.
.
.
.
PC#
.
.
.
.
.
.
.
.
.
.
.
.
.. .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
13
10
7
4
1
9
11
12
8
#
2
3
5
6
VER#DATE DESCRIPTION OF CHANGE
.
.
.
.
.
.
.
.
.
.
.
.
PC#
.
.
.
.
.
.
.
.
.
.
.
.
.. .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
13
10
7
4
1
9
11
12
8
#
2
3
5
6
VER#DATE DESCRIPTION OF CHANGE
.
.
.
.
.
.
.
.
.
.
.
.
PC#
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
..
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
REF POT#FUNCTION KNOB#
POTENTIOMETERS AND KNOBS
.
.
.
.
.
.
.
.
.
.
.
.. .
.
.
.
.
.
.
.
.
.
STYLE
.
.
.
.
.
.
.
.
.
.
.
.
.
I G O
NJM7815
I OG
NJM7915
TO-247AC
D S
IRGP35B60PDPBF
G
CASES AND PINS
6
4
2
DT
7
5
3
1
IN
9
LO NC
11
VS
13
SD VB
10
12
14
NC
NC
8
VSS
COM
VCC
HO
NC
6686
IRS21844S
2385 2307
6856 6857
IRGP50B60PDPBF
-
+
AC AC
C217 R215
U201
R219
C208
R240
C200
C211
Q200
C234
Q201
D305
R252
D203
C228
R228
C219
R263
D308
D309
C203
R227
C242
C226
R206
R221
R234
R264
C301
R260
U205
R214
C215
D213
C213
R268
D200
U200
F301
F302
R243
U206
C307
C229
ZD200
D208
C303
L202
C237
Q205
D210
R255
C204
C218
R204
C212
C202
R203
R200
C225
D214
R212
U202
Q204
C206
C207
R218
C214
R208
R213
R247
C305
R238
L200
L401
R242
D307
D306
D302
R261
R262
C235
R259
R258
R248
R241
R249
D206
C216
R250
C224
R225
C241
D212
C23 8
C236
C306
C222
R304
R303
Q203
R231
R224
R236
R233
R229
R230
C209 C205
C220
R222
C233
D20 9
R232
R209
D207
W304
W402
R256
C313
C312
C309
C210
R226
W301
C302
C227
R257
C310
R267
C223
C231
C221
R210
R251
C230
C308
C304
U207
C239
W302
W201
R223
D201
W306
L300
R202
U204
R207
D204
R301
D300
W307
D301
D304
R266
C311
R237
D205
U203
C232
M1695ES18P
M1692PSA2S
M1693ES15P
U303
U302
R265
D211
C314
M1694PSA1S
6664
6857
4147
4147
5242
5221
6856
4151
6664
5270
6663
6451
4162
6852
4215
5934
5934
5962
5972
5934
5934
2496
5951
5266
4146
5972
2496
5887
2328
5887
3817
1500UH
100 K
15V0
250V
2U2
12K1
50V
10 0K
50V
25V
25V
25V
470P
DNS
IRGP50B60PD1PBF
PABRK200
COBRK2
PABRK300
COBRK3
PABRK400
COBRK4
PABRK500
COBRK5
PABRK600
COBRK6
PAC20001
PAC20002
COC200
PAC20201
PAC20202
COC202
PAC20301
PAC20302
COC203
PAC20401
PAC20402
COC204
PAC20501
PAC20502
COC205
PAC20601 PAC20602
COC206
PAC20701PAC20702
COC207
PAC20801
PAC20802
COC208
PAC20901
PAC20902
COC209
PAC21001
PAC21002
COC210
PAC21101
PAC21102
COC211
PAC21201
PAC21202
COC212
PAC21301 PAC21302
COC213
PAC21401
PAC21402
COC214
PAC21501
PAC21502
COC215
PAC21601PAC21602
COC216
PAC21702
PAC21701
COC217
PAC21801
PAC21802
COC218
PAC21901
PAC21902
COC219
PAC22001
PAC22002
COC220
PAC22101 PAC22102
COC221
PAC22201
PAC22202
COC222
PAC22302 PAC22301
COC223
PAC22401
PAC22402
COC224
PAC22502
PAC22501
COC225
PAC22601
PAC22602
COC226
PAC22701 PAC22702
COC227
PAC22801
PAC22802
COC228
PAC22902
PAC22901
COC229
PAC23001 PAC23002
COC230
PAC23101PAC23102
COC231
PAC23202
PAC23201
COC232
PAC23301
PAC23302
COC233
PAC23401
PAC23402
COC234
PAC23501 PAC23502
COC235
PAC23601
PAC23602
COC236
PAC23702
PAC23701
COC237
PAC23802
PAC23801
COC238
PAC23902
PAC23901
COC239
PAC24101
PAC24102
COC241
PAC24202
PAC24201
COC242
PAC30101
PAC30102
COC301
PAC30201
PAC30202
COC302
PAC30302
PAC30301
COC303
PAC30401
PAC30402
COC304
PAC30501
PAC30502
COC305
PAC30601
PAC30602
COC306
PAC30702
PAC30701
COC307
PAC30801
PAC30802
COC308
PAC30901 PAC30902
COC309
PAC31001 PAC31002
COC310
PAC31103
PAC31104
PAC31101PAC31102
COC311
PAC31203
PAC31204
PAC31201PAC31202
COC312
PAC31303
PAC31304
PAC31301PAC31302
COC313
PAC31403
PAC31404
PAC31401PAC31402
COC314
COCNR1
COCNR2
COCNR3
COCNR4
PACRG100
COCRG1
PAD20002PAD20001
COD200
PAD20102
PAD20101PAD20103
COD201
PAD20303
PAD20301
PAD20302
COD203
PAD20401
PAD20402
COD204
PAD20502
PAD20501
COD205
PAD20602
PAD20601
PAD20603
COD206
PAD20702 PAD20701
COD207
PAD20802
PAD20801
COD208
PAD20902
PAD20901PAD20903
COD209
PAD21002 PAD21001
COD210
PAD21102
PAD21101
COD211
PAD21202
PAD21201
COD212
PAD21302
PAD21301PAD21303
COD213
PAD21401 PAD21402
COD214
PAD30001
PAD30002
PAD30003
PAD30004
PAD30005
COD300
PAD30102PAD30101
COD301
PAD30201
PAD30202
COD302
PAD30402PAD30401
COD304
PAD30501
PAD30502
COD305
PAD30601
PAD30602
COD306
PAD30701
PAD30702
COD307
PAD30801
PAD30802
COD308
PAD30901
PAD30902
COD309
PAEC301
PAEC300
COEC3
PAEC400
PAEC401
COEC4
PAEC701
PAEC700
COEC7
PAEC801
COEC8
COEC9
COESD2
PAF30102
PAF30101
COF301
PAF30202
PAF30201
COF302
COHS1
COHS2
PAL20001
PAL20002
COL200
PAL20202PAL20201
COL202
PAL30001
PAL30003
PAL30002
PAL30004
PAL30000
COL300
PAL40103
PAL40101
PAL40102
PAL40104
COL401
PALink202
PALink201
COLink2
PAM169202 PAM169201
COM1692
PAM169302 PAM169301
COM1693
PAM169402 PAM169401
COM1694
PAM169502 PAM169501
COM1695
PAPF100
COPF1
PAPF200
COPF2
PAPF300
COPF3
PAPF400
COPF4
PAQ20002
PAQ20001 PAQ20003
COQ200
PAQ20102
PAQ20101
PAQ20103
COQ201
PAQ20301
PAQ20303
PAQ20302
PAQ20304
COQ203
PAQ20403PAQ20401
PAQ20402
COQ204
PAQ20501
PAQ20503
PAQ20502
PAQ20504
COQ205
PAR101 PAR102
COR1
PAR20002
PAR20001
COR200
PAR20202 PAR20201
COR202
PAR20302
PAR20301
COR203
PAR20402
PAR20401
COR204
PAR20602
PAR20601
COR206
PAR20702
PAR20701
COR207
PAR20802
PAR20801
COR208
PAR20902
PAR20901
COR209
PAR21002
PAR21001
COR210
PAR21202
PAR21201
COR212
PAR21302
PAR21301
COR213
PAR21402
PAR21401
COR214
PAR21502
PAR21501
COR215
PAR21802
PAR21801
COR218
PAR21902
PAR21901
COR219
PAR22102
PAR22101
COR221
PAR22202
PAR22201
COR222
PAR22302
PAR22301
COR223
PAR22402
PAR22401
COR224
PAR22502PAR22501
COR225
PAR22602 PAR22601
COR226
PAR22702
PAR22701
COR227
PAR22802PAR22801
COR228
PAR22902
PAR22901
COR229
PAR23002
PAR23001
COR230
PAR23102
PAR23101
COR231
PAR23202
PAR23201
COR232
PAR23302
PAR23301
COR233
PAR23402
PAR23401
COR234
PAR23602
PAR23601
COR236
PAR23702 PAR23701
COR237
PAR23802
PAR23801
COR238
PAR24002
PAR24001
COR240
PAR24101
PAR24102
COR241
PAR24201 PAR24202
COR242
PAR24301 PAR24302
COR243
PAR24702 PAR24701
COR247
PAR24801
PAR24802
COR248
PAR24902
PAR24901
COR249
PAR25002
PAR25001
COR250
PAR25102
PAR25101
COR251
PAR25202
PAR25201
COR252
PAR25502
PAR25501
COR255
PAR25602
PAR25601
COR256
PAR25702
PAR25701
COR257
PAR25802
PAR25801
COR258
PAR25902
PAR25901
COR259
PAR26002
PAR26001
COR260
PAR26102
PAR26101
COR261
PAR26202
PAR26201
COR262
PAR26302
PAR26301
COR263
PAR26402
PAR26401
COR264
PAR26501
PAR26502
COR265
PAR26601 PAR26602
COR266
PAR26701PAR26702
COR267
PAR26801
PAR26802
COR268
PAR30102
PAR30101
COR301
PAR30301
PAR30302
COR303
PAR30401
PAR30402
COR304
PARTV100
CORTV1
PARTV200
CORTV2
PARTV300
CORTV3
PARTV400
CORTV4
PARTV500
CORTV5
PARTV600
CORTV6
PARTV700
CORTV7
PARTV800
CORTV8
PARTV900
CORTV9
PARTV1100
PARTV1200
PARTV1300
PARTV1400
CORTV14
PARTV1500
CORTV15
PARTV1600
CORTV16
PARTV1700
CORTV17
PARTV1800
CORTV18
PARTV1900
CORTV19
CORTV22
CORTV29
CORTV30
CORTV31 CORTV32
CORTV33
CORTV34
PATLH301
COTLH3
PATLH401
COTLH4
PATLH501
COTLH5
PAU20003
PAU20002
PAU20004
PAU20001
COU200
PAU20104
PAU20102 PAU20103
PAU20105
PAU20107 PAU20106
PAU20101
PAU20108
COU201
PAU20204
PAU20202
PAU20203
PAU20205
PAU20207
PAU20206
PAU20201
PAU20208
COU202
PAU203012
PAU20303
PAU203013
PAU203014
PAU20309
PAU203010
PAU203011
PAU20308
PAU20302
PAU20301
PAU20306
PAU20305
PAU20304
PAU20307
COU203
PAU20404
PAU20402
PAU20403
PAU20405
PAU20407
PAU20406
PAU20401
PAU20408
COU204
PAU20504PAU20502
PAU20503
PAU20505PAU20507
PAU20506
PAU20501
PAU20508
COU205
PAU20603
PAU20602
PAU20604
PAU20601
PAU20605
COU206
PAU20708
PAU20707
PAU20705
PAU20702
PAU20701
PAU20704
PAU20703
COU207
PAU30203
PAU30202
PAU30201
PAU30204
COU302
PAU30303
PAU30302
PAU30301
PAU30304
COU303
PAW20107 PAW20101PAW20104PAW20108 PAW20106 PAW20105 PAW20103 PAW20102
COW201
PAW30106PAW30102PAW30101 PAW30105PAW30104PAW30103
PAW30100
COW301
PAW30201 PAW30202
PAW30200
COW302
PAW30400
PAW30403
PAW30401
PAW30402
COW304
PAW30606PAW30602PAW30601 PAW30605PAW30604PAW30603
PAW30600
COW306
PAW30701
PAW30702
PAW30703
PAW30700
PAW30704
COW307
PAW40202
PAW40204
PAW40203
PAW40201
COW402
PAXC100
PAXC200
COXC2
PAXC300
COXC3
PAXC400
COXC4
PAXC500
COXC5
PAXC600
COXC6
PAXC700
COXC7
PAXC800
PAXC900
COXC9
PAXC1100
COXC11
PAXC1200
COXC12
PAXC1600
COXC16
PAZD20002 PAZD20001
COZD200
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
17
K K
J J
I I
H H
G G
F F
E E
D D
C C
B B
A A
Assembly Documentation
Section:
Product(s):
Assembly.SchDoc
X8024 3 3
Sheet OfPCB#: Rev#:
Modified:
V01
File:2017-11-10
ES15P/ES18P/PSA1S/PSA2S
EML Rev#:
01
Tmp Date: TemplateRe Date
1. PCBSA: ADD RTV BETWEEN C311, C312, C313 and C314 AS
SHOWN HERE.
2. PCBSA: ASSEMBLY HEATSINK
First install #8829 screw to align heatspreader Z1611
then install all devices.
After that install #8800 and #8761 for grounding. Nut up.
3. PCBSA: Add RTV under R303 and R304 on the heatspreader and
keep the resistors away from the caps.
4. Add goop on both sides of ceramic insulator #4181.
MOUTING HARDWARE FOR U302 AND U303
SPECIAL PRODUCTION NOTES
PCB ASSEMBLY DOCUMENTATION
8871 4-40 X 5/8
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
17
K K
J J
I I
H H
G G
F F
E E
D D
C C
B B
A A
Assembly Documentation
Section:
Product(s):
Re or NotesUpdated.SchDoc
X8024 3 3
Sheet OfPCB#: Rev#:
Modified:
V01
File:2017-11-10
ES15P/ES18P/PSA1S/PSA2S
EML Rev#:
01
Tmp Date: TemplateRe Date
REWORK NOTES (FOR X8024 V01 ONLY)
Department: Test & Repair
Place AND Solder 12K1 0603 resistor (YS#7761) ON PIN 3 AND PIN 4 OF U201 as shown below:
M1692, M1693, M1694, M1695
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
17
K K
J J
I I
H H
G G
F F
E E
D D
C C
B B
A A
Design Information And History
Section:
Product(s):
History.SchDoc
X8024 2 3
Sheet OfPCB#: Rev#:
Modified:
V01
File:2017-11-10
ES15P/ES18P/PSA1S/PSA2S
EML Rev#:
01
Tmp Rev: V028
CHANGE HISTORY POTENTIOMETERS AND KNOBS
PINOUT DIAGRAMS
DESIGN HISTORY AND INFORMATION
THIS SHEET CONTAINS A CHANGE HISTORY LOG, A LIST OF THE POTS & KNOBS AND A LEADS & PINS REFERENCE SECTION.
V01 RELEASED FOR PRODUCTION
REMOVE SIL PADS YS 3797 AND CHANGE SCREW 8741 TO 8871
Changed R225 and R249 rom 22R YS 7930 to 10R YS 7852
Changed D203A and D206A rom BAT54 YS 7944 to BAT750 YS 9106
Change R219 rom 470R YS 7856 to 475R YS 7673
Change R264 rom 1K62 YS 8137 to 1K4 YS 9107
Add 12K1 0603 resistor YS 7761 bet een pin 3 and pin 4 o U201
For M1693 PCB Only:
Change Q203A and Q205A rom IRGP50B60PDPbF YS 2385 to
IRGP50B60PD1PbF YS 2496
For M1692 PCB Only:
Change Q203A and Q205A rom IRGP50B60PDPbF YS 2385 to
IRGP50B60PD1PbF YS 2496
V01
V01
V01
27-OCT-2016
13
10
7
4
1
9
11
12
8
#
2
3
5
6
VER#DATE DESCRIPTION OF CHANGE
07-JUL-2017
2-NOV-2017
10-NOV-2017
PC#
9077
9114
TEMP
.. .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
13
10
7
4
1
9
11
12
8
#
2
3
5
6
VER#DATE DESCRIPTION OF CHANGE
.
.
.
.
.
.
.
.
.
.
.
.
PC#
.
.
.
.
.
.
.
.
.
.
.
.
.. .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
13
10
7
4
1
9
11
12
8
#
2
3
5
6
VER#DATE DESCRIPTION OF CHANGE
.
.
.
.
.
.
.
.
.
.
.
.
PC#
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
..
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
REF POT#FUNCTION KNOB#
POTENTIOMETERS AND KNOBS
.
.
.
.
.
.
.
.
.
.
.
.. .
.
.
.
.
.
.
.
.
.
STYLE
.
.
.
.
.
.
.
.
.
.
.
.
.
I G O
NJM7815
I OG
NJM7915
TO-247AC
D S
IRGP35B60PDPBF
G
CASES AND PINS
6
4
2
DT
7
5
3
1
IN
9
LO NC
11
VS
13
SD VB
10
12
14
NC
NC
8
VSS
COM
VCC
HO
NC
6686
IRS21844S
2385 2307
6856 6857
IRGP50B60PDPBF
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
17
K K
J J
I I
H H
G G
F F
E E
D D
C C
B B
A A
Power Supply
Section:
Product(s):
Supply.SCHDOC
X8024 3 4Sheet OfPCB# Rev#
Date Modified:
V02
Filename:2018-01-31
ES12P/ES15P/ES18P/ES21P/PSA1S/PSA2S
BOM Rev# 01
ES1H
D304
6
1
W306:1
6
4
W306:4
6
2
W301:2
6
5
W301:5
YEL/BLK
150 C
BLU
4
4
W307:4
4
1
W307:1
1W00
1K8
2512
R301
6
6
W306:6
6
5
W306:5
6
1
W301:1
120V
6
3
W301:3
6
4
W301:4
6
6
W301:6
WHT
BRN
BLK
3
2
W304:2
3
3
W304:3
3
1
W304:1
ES1H
D301
7A
7895
F302
50V
2200U
18X27MM
C307
25V4U7
4X4mm
C308
240V
6
2
W306:2
6
3
W306:3
4
2
W307:2
4
3
W307:3
7A
7895
F301
50V
2200U
18X27MM
C303
100V
100N
1206
C301
25V4U7
4X4mm
C304
CON_HOLE_189
1
EC3
VIO
GRY
RED
YEL
RED
GRY
VIO
100V
100N
1206
C310
250V4N7
Y 10MM
C309
MURS120T3
DO214AA
D306
MURS120T3
DO214AA
D307
MURS120T3
DO214AA
D302
100V
100N
1206
C306
TO POWER AMP PCB
250V100N
X2 18MM
C302
250V680N
X2 30MM
C305
MURS120T3
DO214AA
D305
1
2
3
4
6
5
POWER SUPPLY
250V
2700U
5934
C312
250V
2700U
5934
C311
+Hi
-Hi
-15V
+15V
PSGND
IEC_RECT
DPDT S itch
S301
3
2
1
3575
2
3
4
1
4096
Circ it Brea er
10A
S300
BLK BLK
BLK
WHT WHT
10W0
25K
.
R303
2
W302:2
2
1
W302:1
BRIDGE
SIP
600V
45A
D300
6852
PSGND
NJM7915FA
6857
IN
REF
OUT
U303
NJM7815FA
6856
IN
REF
OUT
U302
N1301
N1302
N1304
N1305
N1306
N1307
N1308
N1309
N1310
N1311
N1312
N1313
N1314
N1315
N1316
XFMR-SEC-HI
XFMR-SEC
AC IN
POWER
CON_HOLE_189
1
EC4
2700U
5934
250V
C313
2700U
5934
250V
C314
10W0
.
25K
R304
DO-214AC
ES1H
D308
DO-214AC
ES1H
D309
1500UH
3817
L300
+31V
-31V
CH1422U PSA1S
CH1426U ES15P
CH1423U ES18P
CH1426U PSA2S
M1693-ES15P
+175V PSA1S
+202V ES15P
+205V ES18P
+202V PSA2S
-175V PSA1S
-202V ES15P
-205V ES18P
-202V PSA2S
SILENT
CHASSIS GND
AC BOARD
CHASSIS GND
POWER
BOARD
N3
N4
N6
N7
N8
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
17
K K
J J
I I
H H
G G
F F
E E
D D
C C
B B
A A
Woofer Amp
Section:
Product(s):
Amp.SCHDOC
X8024 2 4Sheet OfPCB# Rev#
Date Modified:
V02
Filename:2018-01-31
ES12P/ES15P/ES18P/ES21P/PSA1S/PSA2S
BOM Rev# 01
CDSF4148
D200
22V0
SOT-23
D201
8
2
W201:2
8
4
W201:4
8
3
W201:3
W125
0805
4M7
R208
ES1H
D205
50V100N
0805
C202
1/8W
0805
6K98
R229
1/8W
0805
6K98
R233
8
8
W201:8
8
6
W201:6
8
5
W201:5
8
7
W201:7
50V100N
0805
C210
50V100N
0805
C209
50V100N
0805
C204
50V100N
0805
C203
1/8W
6K98
0805
R236
50V
470P
0603
C225
W100
475R0
0805
R219
W125
47K5
0805
R215
W125
0805
10R0
R202
50V100N
0805
C207
50V100N
0805
C206
W125
0805
10R0
R200
W100
0805
1K0
R231
100V
47N
1206
C226
W125
4K7
0805
R214
W125
0805
4K02
R230
W125
470R
0805
R221
W125
0805
82K5
R255
W100
0805
1M0
R227
W125
0805
47R
R224
W100
182K
0805
R213
MMBTA92
SOT-23
8165
Q200
25V
1U
1206
C216
W125
0805
100K
R206
BAT750
SOT-23
D206
100V
100N
1206
C221
W250
1206
10R
R225
0W2
18V0
ZD200
IRGP50B60PD1PBF
T0247
2496
Q205
W100
182K
0805
R234
1000V
470P
RAD .3in
C229
340V
3U3
RAD POLY
C222
400V
680N
C228
400V
680N
C219
50V100N
0805
C208
2x12" 4R 600WPGM #7545 PSA1S
2x15" 8R 1000WPGM #7447 PSA2S
15" 4R 2800WPGM #7470 ES15P
18" 6R 1200WPGM #7420 ES18P
LM311
7851
SO8
5
4
1
2
3
6
7
8
+
-
U201
W100
0603
12K1
R204
MC33078D
7817
DUAL OPAMP
+
3
-
2
1
U204:1
W125
0805
8K66
R218
W100
10K0
0805
R212
50V
47P
0805
C230
50V
100N
0805
C231
25V33U
6 6mm
C232
1W00
1R0
2512
R237
BAT750
SOT-23
D203
W100
1M0
0805
R252
W250
1206
10R
R228
1W00
2R0
2512
R248
2W00
0R02
OARS
R242
50V100N
0805
C200
W125
0805
2K2
R207
W100
0805
100R
R238
50V100N
0805
C212
50V100N
0805
C211
50V100N
0805
C205
+/-15V_MOD
W100
0805
1K0
R232
MC33078D
7817
DUAL OPAMP
+
3
-
2
1
U205:1
1/8W
0805
6K98
R223
50V470P
0603
C217
W100
0805
10K0
R203
W125
0805
82K5
R256
MC33078D
7817
DUAL OPAMP
+
5
-
6
7
U205:2
50V1N
0805
C218
50V680P
0805
C213
SOT-23
MMBF4391LT1
7806
S
D
Q201
W125
4K7
0805
R247
W250
1206
10R
R250
W250
1206
10R
R249
50V1U
4X4mm
C224
MMBTA92
SOT-23
8165
Q204
ES1H
DO-214AC
D204
W100
15K0
0805
R226
SOT-23
43V0
D209
140V
2 2
C223
6663
533UH
L200
IRGP50B60PD1PBF
T0247
2496
Q203
+15V_LS
50V
100N
0805
C227
50V
220N
1206
C220
V+
8
V-
4
FROM INPUT PCB
W100
10K0
0805
R222
LM311
7851
SO8
5
4
1
2
3
6
7
8
+
-
U202
MC33078D
7817
DUAL OPAMP
+
5
-
6
7
U204:2
W125
470R
0805
R240
50V
1U
4X4mm
C215
50V
470N
1206
C214
6668
LTV-8141S
4PIN SMT
4
3
U200:2
W125
4K7
0805
R251
1W00
2512
2R0
R241
WOOFER
6668
LTV-8141S
4PIN SMT
2
1
U200:1
IRS21844S
SO14
VSS
3
COM
5
DT
4
VS
11
IN
1
HO
12
VCC
7
LO
6
SD
2
VB
13
6686
U203
SUBWOOFER AMP
SILENT ON/OFF
LVGND2
+15V_MOD
+15V_MOD
+15V_MOD
+15V_MOD+15V_MOD
+15V_MOD
+15V_MOD
+15V_MOD
-15V_MOD
-15V_MOD
-15V_MOD
-15V_MOD
-15V_MOD
-15V_MOD
+15V
+15V
+15V
+15V
-15V
-15V
-15V -15V
+15V_LS
-Hi
-Hi
+Hi
PSGND
PSGND
PSGNDLVGND
LVGND
WOOFGND
WOOFGND
WOOFGND WOOFGND
WOOFGND
WOOFGND
WOOFGND
WOOFGND
WOOFGND
V+
8
V-
4
+15V_MOD
-15V_MOD
100N
0805
50V
C233
100N
0805
50V
C234
D1005
CDSF4148
D207
W125
4K7
0805
R257
-15V_MOD
W100
182K
0805
R259
W100
20K5
0805
R258
W100
274K
0805
R261
0805
470K
R260
10U
0805
10V
C235
W100
274K
0805
R262
SOT23-5
2
43
1
5
TL3318163
+
-
U206
PSGND
8
1
W201:1
LVGND
PSGND WOOFGNDLVGND
Lin 1 Lin 2
CON_HOLE_140
1
EC7
N1201
N1202
N1203
N1204
N1205
N1206
N1207
N1208
N1209
N1210
N1211
N1212
486 H
2906
L401
1
2
3
4
RED
BLK
N1214
N1215
LNK302G
8211
S
8
S
2
S
1
FB
4
BP
3
S
7
D
5
SMD8B
U207
100N
0805
50V
C236
1206
25V1U
C237
4U7
1210
50V
C238
W100
13K
0805
R263
W125
1K4
0805
R264
1000UH
L202
DO-214AC
ES1H
D208
MURA240T3
403D
D210
MURA240T3
403D
D211
W250
330R
1206
R265
2U2
RAD 0.1in
250V
C239
4U7
121050V
C241
PSGND
+15V_LS
DO-214AC
ES1H
D212
W100
6K98
0805
R210
W125
100K
0805
R209
4
1
W402:1
4
2
W402:2
4
3
W402:3
4
4
W402:4
BLK
RED
10U
1206
16V
C242
1W00
100K
2512
R267
1W00
2512
100K
R266
+Hi
+175V PSA1S
+202V ES15P
+205V ES18P
+202V PSA2S
M1693-ES15P
SOT-23
15V0
D213
-175V PSA1S
-202V ES15P
-205V ES18P
-202V PSA2S
D1005
CDSF4148
D214
W125
4K02
0805
R268
2W00
0R05
OARS
R243
YS 3114
-175V PSA1S
-202V ES15P
-205V ES18P
-202V PSA2S
SILENT
W100
12K1
0603
R201
150P
1206
1000V
C401
150P
1206
1000V
C402
N5
N1
N2
PIC20001
PIC20002
COC200
PIC20201
PIC20202
COC202
PIC20301
PIC20302
COC203
PIC20401
PIC20402
COC204
PIC20501
PIC20502
COC205
PIC20601
PIC20602
COC206
PIC20701
PIC20702
COC207
PIC20801
PIC20802
COC208
PIC20901
PIC20902
COC209
PIC21001
PIC21002
COC210
PIC21101
PIC21102
COC211
PIC21201
PIC21202
COC212
PIC21301PIC21302
COC213
PIC21401
PIC21402
COC214
PIC21501
PIC21502
COC215
PIC21601
PIC21602
COC216
PIC21701PIC21702
COC217
PIC21801PIC21802
COC218
PIC21901
PIC21902
COC219
PIC22001
PIC22002
COC220
PIC22101
PIC22102
COC221
PIC22201
PIC22202
COC222
PIC22301
PIC22302
COC223
PIC22401
PIC22402
COC224
PIC22501
PIC22502
COC225
PIC22601
PIC22602
COC226
PIC22701
PIC22702
COC227
PIC22801
PIC22802
COC228
PIC22901
PIC22902
COC229
PIC23001
PIC23002
COC230
PIC23101
PIC23102
COC231
PIC23201
PIC23202
COC232
PIC23301
PIC23302
COC233
PIC23401
PIC23402
COC234
PIC23501
PIC23502
COC235
PIC23601PIC23602
COC236
PIC23701PIC23702
COC237
PIC23801
PIC23802
COC238
PIC23901
PIC23902
COC239
PIC24101
PIC24102
COC241
PIC24201
PIC24202
COC242
PIC40101PIC40102
COC401
PIC40201
PIC40202
COC402
PID20001
PID20002
COD200
PID20101
PID20102
COD201
PID20301PID20302
COD203
PID20401
PID20402
COD204
PID20501PID20502
COD205
PID20601PID20602
COD206
PID20701PID20702
COD207
PID20801PID20802
COD208
PID20901
PID20902
COD209
PID21001
PID21002
COD210
PID21101
PID21102
COD211
PID21201
PID21202
COD212
PID21301
PID21302
COD213
PID21401PID21402
COD214
PIEC701
COEC7
PIL20001PIL20002
COL200
PIL20201
PIL20202
COL202
PIL40101
PIL40102
PIL40103
PIL40104
COL401
PILink101 PILink102
COLink1
PILink201 PILink202
COLink2
PIN101
CON1
PIN201
CON2
PIN501
CON5
PIN120101
CON1201
PIN120201
CON1202
PIN120301
CON1203
PIN120401
CON1204
PIN120501
CON1205
PIN120601
CON1206
PIN120701
CON1207
PIN120801
CON1208
PIN120901
CON1209
PIN121001
CON1210
PIN121101
CON1211
PIN121201
CON1212
PIN121401
CON1214
PIN121501
CON1215
PIQ20001
PIQ20002
PIQ20003
COQ200
PIQ20101
PIQ20102
PIQ20103
COQ201
PIQ20301
PIQ20302
PIQ20303
COQ203
PIQ20401
PIQ20402
PIQ20403
COQ204
PIQ20501
PIQ20502
PIQ20503
COQ205
PIR20001PIR20002
COR200
PIR20101 PIR20102
COR201
PIR20201 PIR20202
COR202
PIR20301
PIR20302
COR203
PIR20401 PIR20402
COR204
PIR20601
PIR20602
COR206
PIR20701 PIR20702
COR207
PIR20801 PIR20802
COR208
PIR20901
PIR20902
COR209
PIR21001
PIR21002
COR210
PIR21201
PIR21202
COR212
PIR21301
PIR21302
COR213
PIR21401
PIR21402
COR214
PIR21501
PIR21502
COR215
PIR21801 PIR21802
COR218
PIR21901
PIR21902
COR219
PIR22101
PIR22102
COR221
PIR22201
PIR22202
COR222
PIR22301 PIR22302
COR223
PIR22401 PIR22402
COR224
PIR22501 PIR22502
COR225
PIR22601
PIR22602
COR226
PIR22701 PIR22702
COR227
PIR22801 PIR22802
COR228
PIR22901
PIR22902
COR229
PIR23001 PIR23002
COR230
PIR23101 PIR23102
COR231
PIR23201 PIR23202
COR232
PIR23301
PIR23302
COR233
PIR23401
PIR23402
COR234
PIR23601
PIR23602
COR236
PIR23701PIR23702
COR237
PIR23801 PIR23802
COR238
PIR24001
PIR24002
COR240
PIR24101
PIR24102
COR241
PIR24201
PIR24202
COR242
PIR24301
PIR24302
COR243
PIR24701
PIR24702
COR247
PIR24801
PIR24802
COR248
PIR24901 PIR24902
COR249
PIR25001 PIR25002
COR250
PIR25101
PIR25102
COR251
PIR25201
PIR25202
COR252
PIR25501 PIR25502
COR255
PIR25601 PIR25602
COR256
PIR25701
PIR25702
COR257
PIR25801
PIR25802
COR258
PIR25901
PIR25902
COR259
PIR26001
PIR26002
COR260
PIR26101
PIR26102
COR261
PIR26201 PIR26202
COR262
PIR26301
PIR26302
COR263
PIR26401 PIR26402
COR264
PIR26501
PIR26502
COR265
PIR26601 PIR26602
COR266
PIR26701 PIR26702
COR267
PIR26801 PIR26802
COR268
PIU20001
PIU20002
COU200:1
PIU20003
PIU20004
COU200:2
PIU20101
PIU20102
PIU20103
PIU20104
PIU20105
PIU20106
PIU20107PIU20108
COU201
PIU20201
PIU20202
PIU20203
PIU20204
PIU20205
PIU20206
PIU20207
PIU20208
COU202
PIU20301
PIU20302
PIU20303
PIU20304
PIU20305
PIU20306
PIU20307
PIU203011
PIU203012
PIU203013
COU203
PIU20401
PIU20402
PIU20403
COU204:1
PIU20405
PIU20406
PIU20407
COU204:2
PIU20404
PIU20408
COU204:3
PIU20501
PIU20502
PIU20503
COU205:1
PIU20505
PIU20506
PIU20507
COU205:2
PIU20504
PIU20508
COU205:3
PIU20601
PIU20602
PIU20603
PIU20604
PIU20605
COU206
PIU20701
PIU20702
PIU20703PIU20704
PIU20705
PIU20707
PIU20708
COU207
PIW20101
COW201:1
PIW20102
COW201:2
PIW20103
COW201:3
PIW20104
COW201:4
PIW20105
COW201:5
PIW20106
COW201:6
PIW20107
COW201:7
PIW20108
COW201:8
PIW40201
COW402:1
PIW40202
COW402:2
PIW40203
COW402:3
PIW40204
COW402:4
PIZD20001
PIZD20002
COZD200
POLVGND2
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
17
K K
J J
I I
H H
G G
F F
E E
D D
C C
B B
A A
Design Information And History
Section:
Product(s):
History.SchDoc
X8024 2 3
Sheet OfPCB#: Rev#:
Modified:
V02
File:2018-01-31
ES12P/ES15P/ES18P/ES21P/PSA1S/PSA2S
EML Rev#:
01
Tmp Rev: V028
CHANGE HISTORY POTENTIOMETERS AND KNOBS
PINOUT DIAGRAMS
DESIGN HISTORY AND INFORMATION
THIS SHEET CONTAINS A CHANGE HISTORY LOG, A LIST OF THE POTS & KNOBS AND A LEADS & PINS REFERENCE SECTION.
V01 RELEASED FOR PRODUCTION
REMOVE SIL PADS YS 3797 AND CHANGE SCREW 8741 TO 8871
Changed R225 and R249 rom 22R YS 7930 to 10R YS 7852
Changed D203A and D206A rom BAT54 YS 7944 to BAT750 YS 9106
Change R219 rom 470R YS 7856 to 475R YS 7673
Change R264 rom 1K62 YS 8137 to 1K4 YS 9107
Add 12K1 0603 resistor YS 7761 bet een pin 3 and pin 4 o U201
For M1693 PCB Only:
Change Q203A and Q205A rom IRGP50B60PDPbF YS 2385 to
IRGP50B60PD1PbF YS 2496
For M1692 PCB Only:
Change Q203A and Q205A rom IRGP50B60PDPbF YS 2385 to
IRGP50B60PD1PbF YS 2496
V01
V01
V01
27-OCT-2016
13
10
7
4
1
9
11
12
8
#
2
3
5
6
VER#DATE DESCRIPTION OF CHANGE
07-JUL-2017
2-NOV-2017
10-NOV-2017
PC#
9077
9114
9134
9114V02 Add t o 150pF 100V capacitors YS 5982 bet een PS_GND and pin 1 and pin 4 o W402
Change C309 connection rom be ore L300 to a ter L300
Added M1690 ES21P and M1691 ES12P to board
Added 5 test points or Test & Repair
V02 Released
.
.
.
.
.
.
.
.
V02
V02
V02
.
.
.
.
.
.
.
.
26-NOV-2017
13
10
7
4
1
9
11
12
8
#
2
3
5
6
VER#DATE DESCRIPTION OF CHANGE
20-DEC-2017
18-DEC-2017
22-DEC-2017
.
.
.
.
.
.
.
.
PC#
.
.
.
.
.
.
.
.
.. .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
13
10
7
4
1
9
11
12
8
#
2
3
5
6
VER#DATE DESCRIPTION OF CHANGE
.
.
.
.
.
.
.
.
.
.
.
.
PC#
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
..
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
REF POT#FUNCTION KNOB#
POTENTIOMETERS AND KNOBS
.
.
.
.
.
.
.
.
.
.
.
.. .
.
.
.
.
.
.
.
.
.
STYLE
.
.
.
.
.
.
.
.
.
.
.
.
.
I G O
NJM7815
I OG
NJM7915
TO-247AC
D S
IRGP35B60PDPBF
G
CASES AND PINS
6
4
2
DT
7
5
3
1
IN
9
LO NC
11
VS
13
SD VB
10
12
14
NC
NC
8
VSS
COM
VCC
HO
NC
6686
IRS21844S
2496 23076856 6857
IRGP50B60PDPBF
Score
Score
Score
222 .25 mm
241.3 mm
-
+
ACAC
C217 R215
U201
C208
R240
C200
C211
C234
Q201
D305
R252
D203
C228
R228
C219
R263
D308
D309
C203
R227
C242
C226
R206
R221
R234
R264
C301
R260
U205
R214
C215
C213
R268
D200
U200
F301
F302
U206
C307
C229
ZD200
D208
C303
L202
C237
Q205
D210
C204
R255
C218
R204
C202
C212
D201
R203
R219
C209
R200
C225
D214
U202
R212
Q204
D209
C206
C207
C214
R218
R208
Q200
R213
R247
C305
D213
R238
L200
C402
R301
ES15P
R242
D306
D307
D302
R261
C235
R262
R258
R259
R241
R248
R249
D206
C216
R250
C224
R225
D212
C241
C238
C236
C306
C222
R303
R304
Q203
R231
R224
R229
R233
R236
R230
C205
R222
C220
C233
R232
R209
D207
W304
W402
C401
R267
R256
C313
C312
M1693
C210
R226
W301
C227
R257
C310
R266
C223
C231
C221
R210
R251
C230
TJH1
C308
C304
C239
U207
C309
W302
W201
R223
R201
TJH2
W306
L300
R202
U204
R207
D204
D300
W307
D301
D304
C311
D205
R237
U203
C232
U303
U302
R265
D211
C302
C314
L401
4 146
4 151
+
+
4 215
6852
58875887
5221
5270
6 451
5962
5951
6664
4147
5242
4162
6857
6856
4181
4181
5972
5266
4147
3817
5934
5934
2328
6663
5934
5934
2496
5972
2496
6664
45A
250V
2700U
2700U
250V
2700U
2700U
IRGP50B60PD1PBF
IRGP50B60PD1PBF
250V 250V
533UH
12K1
100K
15V0
250V
100N
250V
150P
2U2
100K
25V
600V
150P
50V
50V
470P
25V
25V
340V
2200U
1000V
3U3
25K 10W0
NJM7915FA
400V
680N
400V
1500UH
25K
2200U
NJM7815FA
680N
10W0
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
17
K K
J J
I I
H H
G G
F F
E E
D D
C C
B B
A A
Assembly Documentation
Section:
Product(s):
Assembly.SchDoc
X8024 3 3
Sheet OfPCB#: Rev#:
Modified:
V02
File:05-Apr-18
ES12P/ES15P/ES18P/ES21P/PSA1S/PSA2S
EML Rev#:
01
Tmp Date: TemplateRe Date
Add RTV UNDER R303 AND R304 on the
heatspreader
PCB ASSEMBLY DOCUMENTATION
MOUNTING HARDWARE FOR U302/U303 AND Q203/Q205:
YS#: 8871
DESC: 4-40X5/8 PAN
YS#: 3501
DESC: COMP WASHER
U303 U302 Q205 Q203
YS#: 8902
DESC: 4-40X3/4 PAN
YS#: 8485
DESC: #6 ZINC WASHER
YS#: 4181
DESC: CERAMIC INSULATOR
ADD GOOP ON BOTH SIDES OF CERAMIC INSULATORS
YS#: Z1611
DESC: HEAT SPREADER
IMPORTANT!
TOP VIEW: BOTTOM VIEW:
MOUNTING HARDWARE FOR D300:
TOP VIEW:
BOTTOM VIEW:
YS#: 8701
DESC: 4-40 KEPS NUT
D300
YS#: 8800
DESC: 6-32 KEPS NUT
YS#: 8837
DESC: 6-32X1/2 PAN
NO WASHER NEEDED
MOUNTING HARDWARE & INSTRUCTIONS FOR HEAT SPREADER Z1611:
1- First install #8742 screw to align heatspreader Z1611
2- Install all devices on Heat Spreader
3- Install #8800 and #8835 for grounding. Nut up.
YS#: 8742
DESC: 4-40X3/8 PAN
YS#: Z1611
DESC: HEAT SPREADER
YS#: 8800
DESC: 6-32 KEPS NUT
RTV INSTRUCTIONS:
YS#: 8835
DESC: 6-32X1/2 PAN
ADD RTV BETWEEN:
C311, C312, C313 and C314 AFTER WAVE
SOLDER
ADD RTV
IMPORTANT: Keep the resistors away
from the nearby capacitors (C312, C313)
INSERT FROM BOTTOM
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36

YORKVILLE ES15P Manuel utilisateur

Marque
YORKVILLE
Modèle
ES15P
Catégorie
Équipement musical supplémentaire
Taper
Manuel utilisateur
Télécharger le PDF
rapport

Documents connexes

Autres documents