VTech CS6949-2 Manuel utilisateur

BC

Go to

www.vtechphones.com

to register your product for

enhanced warranty support

and latest VTech product news.

User’s manual

CS6948-3

CS6949

CS6949-2

CS6949-3

DECT 6.0 cordless telephone

Congratulations

on purchasing your new VTech product.

Before using this telephone, please read

Important safety instructions.

This manual has all the feature

operations and troubleshooting

necessary to install and operate your

new VTech telephone. Please review

this manual thoroughly to ensure

proper installation and operation of

this innovative and feature rich VTech

product.

For support, shopping, and everything

new at VTech, visit our website at

www.vtechphones.com.

In Canada, please visit

phones.vtechcanada.com.

Telephones identified with

this logo have reduced

noise and interference

when used with most T-coil

equipped hearing aids

and cochlear implants.

The TIA-1083 Compliant

Logo is a trademark of

the Telecommunications

Industry Association. Used

under license.

The ENERGY STAR®

program (www.energystar.

gov) recognizes and

encourages the use of

products that save energy

and help protect our

environment. We are proud

to mark this product with

the ENERGY STAR® label

indicating it meets the

latest energy efficiency

guidelines.

Important safety

instructions

When using your telephone equipment,

basic safety precautions should always

be followed to reduce the risk of fire,

electric shock and injury, including the

following:

1. Read and understand all instructions.

2. Follow all warnings and instructions

marked on the product.

3. Unplug this product from the wall

outlet before cleaning. Do not use

liquid or aerosol cleaners. Use a

damp cloth for cleaning.

4. Do not use this product near water

such as near a bath tub, wash bowl,

kitchen sink, laundry tub or swimming

pool, or in a wet basement or shower.

5. Do not place this product on an

unstable table, shelf, stand or other

unstable surfaces.

6. Avoid placing the telephone system

in places with extreme temperature,

direct sunlight, or other electrical

devices. Protect your phone from

moisture, dust, corrosive liquids and

fumes.

7. Slots and openings in the back or

bottom of the telephone base and

handset are provided for ventilation.

To protect them from overheating,

these openings must not be blocked

by placing the product on a soft

surface such as a bed, sofa or rug.

This product should never be placed

near or over a radiator or heat

register. This product should not be

placed in any area where proper

ventilation is not provided.

8. This product should be operated

only from the type of power source

indicated on the marking label. If

you are not sure of the type of power

supply in your home or office, consult

your dealer or local power company.

T

Compatible with

Hearing Aid T-Coil

TIA-1083

9. Do not allow anything to rest on

the power cord. Do not install this

product where the cord may be

walked on.

10. Never push objects of any kind into

this product through the slots in the

telephone base or handset because

they may touch dangerous voltage

points or create a short circuit. Never

spill liquid of any kind on the product.

11. To reduce the risk of electric shock,

do not disassemble this product,

but take it to an authorized service

facility. Opening or removing parts of

the telephone base or handset other

than specified access doors may

expose you to dangerous voltages or

other risks. Incorrect reassembling

can cause electric shock when the

product is subsequently used.

12. Do not overload wall outlets and

extension cords.

13. Unplug this product from the wall

outlet and refer servicing to an

authorized service facility under the

following conditions:

• When the power supply cord or

plug is damaged or frayed.

• If liquid has been spilled onto the

product.

• If the product has been exposed

to rain or water.

• If the product does not operate

normally by following the

operating instructions. Adjust only

those controls that are covered

by the operation instructions.

Improper adjustment of other

controls may result in damage and

often requires extensive work by

an authorized technician to restore

the product to normal operation.

• If the product has been dropped

and the telephone base and/or

handset has been damaged.

• If the product exhibits a distinct

change in performance.

14. Avoid using a telephone (other than

cordless) during an electrical storm.

There is a remote risk of electric

shock from lightning.

15. Do not use the telephone to report

a gas leak in the vicinity of the leak.

Under certain circumstances, a spark

may be created when the adapter

is plugged into the power outlet,

or when the handset is replaced in

its cradle. This is a common event

associated with the closing of any

electrical circuit. The user should not

plug the phone into a power outlet,

and should not put a charged handset

into the cradle, if the phone is

located in an environment containing

concentrations of flammable or

flame-supporting gases, unless there

is adequate ventilation. A spark in

such an environment could create a

fire or explosion. Such environments

might include: medical use of

oxygen without adequate ventilation;

industrial gases (cleaning solvents;

gasoline vapors; etc.); a leak of

natural gas; etc.

16. Only put the handset of your

telephone next to your ear when it is

in normal talk mode.

17. The power adapters are intended

to be correctly oriented in a vertical

or floor mount position. The prongs

are not designed to hold the plug in

place if it is plugged into a ceiling,

under-the-table or cabinet outlet.

18. For pluggable equipment, the

socket-outlet shall be installed near

the equipment and shall be easily

accessible.

SAVE THESE INSTRUCTIONS

Battery

• CAUTION: Use Only Supplied

Battery.

• Do not dispose of the battery in a fire.

Check with local waste management

codes for special disposal instructions.

• Do not open or mutilate the battery.

Released electrolyte is corrosive and

may cause burns or injury to the eyes

or skin. The electrolyte may be toxic if

swallowed.

• Exercise care in handling batteries in

order not to create a short circuit with

conductive materials.

• Charge the battery provided with this

product only in accordance with the

instructions and limitations specified

in this manual.

Precautions for users of

implanted cardiac pacemakers

Cardiac pacemakers (applies only to

digital cordless telephones):

Wireless Technology Research, LLC

(WTR), an independent research entity,

led a multidisciplinary evaluation of the

interference between portable wireless

telephones and implanted cardiac

pacemakers. Supported by the U.S.

Food and Drug Administration, WTR

recommends to physicians that:

Pacemaker patients

• Should keep wireless telephones at

least six inches from the pacemaker.

• Should NOT place wireless telephones

directly over the pacemaker, such as in

a breast pocket, when it is turned ON.

• Should use the wireless telephone at

the ear opposite the pacemaker.

WTR’s evaluation did not identify any

risk to bystanders with pacemakers

from other persons using wireless

telephones.

About cordless telephones

• Privacy: The same features

that make a cordless telephone

convenient create some limitations.

Telephone calls are transmitted

between the telephone base and the

cordless handset by radio waves,

so there is a possibility that the

cordless telephone conversations

could be intercepted by radio

receiving equipment within range

of the cordless handset. For this

reason, you should not think of

cordless telephone conversations as

being as private as those on corded

telephones.

• Electrical power: The telephone

base of this cordless telephone must

be connected to a working electrical

outlet. The electrical outlet should not

be controlled by a wall switch. Calls

cannot be made from the cordless

handset if the telephone base is

unplugged, switched off or if the

electrical power is interrupted.

• Potential TV interference: Some

cordless telephones operate

at frequencies that may cause

interference to televisions and

VCRs. To minimize or prevent

such interference, do not place

the telephone base of the cordless

telephone near or on top of a TV or

VCR. If interference is experienced,

moving the cordless telephone farther

away from the TV or VCR often

reduces or eliminates the interference.

• Rechargeable batteries: Exercise

care in handling batteries in order

not to create a short circuit with

conducting material such as rings,

bracelets and keys. The battery or

conductor may overheat and cause

harm. Observe proper polarity

between the battery and the battery

charger.

• Nickel-metal hydride rechargeable

batteries: Dispose of these batteries

in a safe manner. Do not burn or

puncture the battery. Like other

batteries of this type, if burned or

punctured, they could release caustic

material which could cause injury.

Table of contents

What’s in the box.........................1

Overview ......................................2

Handset overview ...............................2

Telephone base overview ...................3

Charger overview ...............................5

Display icons overview .......................5

Handset and Telephone base lights

overview ..........................................6

Connect ........................................7

Connect the telephone base ...............7

Connect the charger ...........................7

Mount the telephone base ..................7

Install the battery ................................8

Check the battery level .......................8

Charge the battery ..............................8

Before use ....................................9

Set date and time ...............................9

Set answering system through

voice guide ......................................9

Check for dial tone ............................10

Operating range ................................10

Configure your telephone ........10

Using the phone menu .....................10

Set language ....................................10

Set date and time .............................11

Dial mode .........................................12

Temporary tone dialing .....................12

Telephone Operations ..............12

Make a call .......................................13

Predial a call .....................................13

Answer a call ....................................13

End a call ..........................................13

Speakerphone ..................................13

Volume ..............................................14

Mute ..................................................14

Join a call in progress .......................14

Call waiting .......................................14

Chain dialing .....................................15

Find handset .....................................15

Redial list ..................................16

Review a redial list entry ...................16

Dial a redial list entry ........................16

Delete a redial list entry ....................16

Multiple handset use .................17

Intercom ...........................................17

Answer an incoming call during an

intercom call ..................................18

Call transfer using intercom ..............18

Phonebook .................................20

Add a phonebook entry ....................20

Review the phonebook entries .........20

Alphabetical search ..........................21

Edit a phonebook entry ....................21

Delete a phonebook entry ................21

Dial a phonebook entry ....................21

Caller ID ......................................22

Review the caller ID log ....................22

Memory match ..................................22

Missed call indicator .........................23

View dialing options ..........................23

Dial a caller ID log entry ...................24

Save a caller ID log entry to the

phonebook ....................................24

Delete the caller ID log entries .........24

Call block ...................................25

Block unknown calls .........................25

Add a call block entry .......................25

Review call block list .........................26

Edit a call block list entry ..................26

Save a caller ID log entry to call

block list ........................................26

Delete a call block list entry ..............26

Sound settings .........................27

Key tone ............................................27

Ringer tone .......................................27

Handset ringer volume .....................27

Telephone base ringer volume .........27

Temporary ringer silencing ...............28

Quiet mode .......................................28

About the built-in answering

system and voicemail service ...

29

Set your built-in answering

system .....................................29

Turn the answering system on

or off ..............................................29

Default announcement .....................30

Record your own announcement ......30

Play your announcement ..................30

Options during playback: ..................30

Delete your announcement ..............30

Set number of rings .........................31

Turn the call screening on or off .......31

Turn the message alert tone on

or off ..............................................31

Voice guide .......................................32

Using your built-in answering

system .....................................32

New message indication ...................32

Message playback ............................33

Delete all messages .........................33

Remote access .................................34

Set remote access code ...................34

Call screening ...................................35

Call intercept .....................................35

Record, play, and delete memos ......35

Using your built-in answering

system and voicemail service ...

36

Retrieve voicemail from

telephone service ...................36

Retrieve voicemail ............................36

Set your voicemail number ...............36

Turn off the new voicemail

indicators .......................................37

Expand your telephone system ...

37

Screen messages ......................38

Frequently asked questions .....40

ECO mode ..................................43

General product care ................43

The RBRC® seal .........................44

FCC, ACTA and IC regulations ....

44

California Energy Commission

battery charging testing

instructions .............................46

For C-UL compliance only ........47

Limited Warranty .......................50

Disclaimer and Limitation of

Liability ..................................... 52

Technical Specifications ........... 53

1

What’s in the box

Your telephone package contains the

following items. Save your sales receipt

and original packaging in case it is

necessary to ship your telephone for

warranty service.

NOTE

To purchase replacement batteries or power

adapters, visit our website at

www.vtechphones.com or call

1 (800) 595-9511. In Canada, go to

phones.vtechcanada.com or dial

1 (800) 267-7377.

Abridged user’s

manual

Important Safety

Instructions

1 set for CS6949

2 sets for CS6949-2

3 sets for CS6948-3/CS6949-3

1 set for CS6949

2 sets for CS6949-2

3 sets for CS6948-3/CS6949-3

2

Overview

Handset overview

1 – Handset earpiece

2 – LCD display

3 –

• Show the menu.

• While in a menu, press to select

an item, or save an entry or

setting.

4 –

• Hang up a call.

• Silence the ringer temporarily

while the handset is ringing.

• Press and hold to erase the

missed call indicator while the

phone is not in use.

• Press to return to the previous

menu; or press and hold to return

to idle mode, without making

changes.

5 –

• Press and hold to set and turn on

the quiet mode, or turn it off.

• Press repeatedly to show other

dialing options when reviewing a

caller ID log entry.

6 –

• Press to start an intercom

conversation or transfer a call (for

multi-handset models only).

7 – Microphone

8 –

• Mute the microphone during a

call.

• Delete digits or characters while

using the dialing keys.

• Silence the ringer temporarily

while the handset is ringing.

9 –

• Make or answer a call using the

handset speakerphone.

• During a call, press to switch

between the speakerphone and

the handset earpiece.

10 –

• While you have set the dial mode

to pulse and on a call, press to

switch to tone dialing temporarily.

11 –

• Press to add a space when

entering names.

12 –

• Press repeatedly to add or

remove 1 in front of the caller ID

log entry before dialing or saving

it to the phonebook.

• Press and hold to set or dial your

voicemail number.

h

i

j

n

p

o

k

l

m

a

b

c

d

e

f

g

3

13 –

• Make or answer a call.

• Answer an incoming call when

you hear a call waiting alert.

14 –

• Press repeatedly to review the

redial list.

• Press and hold to insert a dialing

pause while entering a number.

15 –

• Review the phonebook when the

phone is not in use.

• Increase the listening volume

during a call.

• Scroll up while in a menu,

phonebook, caller ID log, or

redial list.

• Move the cursor to the right when

entering numbers or names.

• Review the caller ID log when the

phone is not in use.

• Decrease the listening volume

during a call.

• Scroll down while in a menu,

phonebook, caller ID log, or

redial list.

• Move the cursor to the left when

entering numbers or names.

16 – light

• On when the handset is

charging.

Telephone base overview

1 – LCD display

2 –

• Answer an incoming call when

you receive a call waiting alert.

• Review the phonebook when the

phone is not in use.

• Scroll up while in a menu, or in

the phonebook, caller ID log or

redial list.

• Move the cursor to the right when

entering numbers or names.

• Show a menu.

• While in a menu, press to select

an item, or save an entry or

setting.

• Review the caller ID log when the

telephone is not in use.

• Scroll down while in a menu, or

in the phonebook, caller ID log or

redial list.

• Move the cursor to the left when

entering numbers or names.

k

l

m

j

b

c

d

e

f

a

ghi

4

• Press to return to the previous

menu or idle mode without

making changes.

• Press and hold to erase the

missed call indicator when the

phone is not in use.

• While the phone is ringing,

press to silence the base ringer

temporarily.

3 – light

• On when the phone is in use, or

when the answering system is

answering a call.

• On when a handset is being

registered.

• Flashes when there is an

incoming call.

• Flashes when handsets are being

deregistered.

• Flashes when another telephone

on the same line is in use.

4 –

• Press to start or stop message

playback.

• Flashes when there are new

messages or memos in the

answering system.

X/

• Press to delete the playing

message or playing

announcement.

• While reviewing the redial list,

phonebook or caller ID log, press

to delete an individual entry.

• While entering names or

numbers, press to delete a

character or digit.

• Press once to repeat the playing

message.

• Press twice to play the previous

message.

• Press to skip to the next message.

5 –

• Mute the microphone during a

call.

• Silence the base ringer

temporarily while the phone is

ringing.

• Press to page

all handsets when the phone is

not in use.

• Press to turn the built-in

answering system on or off.

/

• Press to make, answer or end a

call.

• During a call, press to switch

between the corded handset and

the base speakerphone.

6 –

• Press and hold to set and turn on

the quiet mode, or turn it off.

• Press repeatedly to display other

dialing options when reviewing a

caller ID log entry.

7 –

• Press to enter space during text

editing.

8 –

• Switch to tone dialing temporarily

during a call.

9 –

• While reviewing a caller ID log

entry, press repeatedly to add or

remove 1 in front of the telephone

number before dialing or saving it

in the phonebook.

• Press and hold to set or dial your

voicemail number.

5

10 – Microphone

11 –

• Press to initiate or answer an

intercom call, or to transfer a

call.

VOL

• Adjust the listening volume.

• Adjust the telephone base

ringer

volume.

• Review the redial list.

• Press repeatedly to view the

last 10 numbers dialed.

• Press and hold to insert a

dialing pause while dialing or

entering numbers.

12 – Speakerphone

13 – Corded handset

Charger overview

1 – Charging pole

Display icons overview

Handset display icons

The battery icon flashes

when the battery is low

and needs charging.

The battery icon animates

when the battery is charging.

The battery icon becomes

solid when the battery is

fully charged.

The handset ringer is off.

There are new voicemail

received from your

telephone service

provider.

1/13 The message number

currently playing and total

number of new/old

messages recorded.

ANS ON The answering system is

turned on.

ECO The ECO mode activates

automatically to reduce

power consumption when

the handset is within range

from the telephone base.

NEW There are new caller ID

log entries.

a

6

Telephone base display icons

The telephone base

ringer is off.

There are new

voicemail received

from your telephone

service provider.

NEW The entry you are

reviewing is new in

the caller ID log.

13

MSG# • The total number

of messages

recorded when the

telephone base is

not in use.

• The number of the

playing message.

Handset and Telephone base

lights overview

Handset lights

On when the handset

speakerphone is in use.

On when the handset

is charging in the

telephone base or

handset charger.

Telephone base lights

• On when the

telephone line is

in use.

• On when you

are registering a

handset.

• Flashes quickly

when there is an

incoming call.

• Flashes when

another telephone

sharing the same

line is in use.

• Flashes when you

are deregistering

all handsets.

On when the

answering system is

turned on.

On when the base

speakerphone is on.

Flashes when there

are new memos or

messages in the

answering system.

On when mute

function is on.

7

Connect

You can choose to connect the telephone

base for desktop usage or wall mounting.

NOTE

S

• Use only the adapters provided.

• Make sure the electrical outlets are not

controlled by wall switches.

• The adapters are intended to be correctly

oriented in a vertical or floor mount

position. The prongs are not designed to

hold the plug in place if it is plugged into a

ceiling, under-the-table or cabinet outlet.

TIP

• If you subscribe to digital subscriber line

(DSL) high-speed Internet service through

your telephone line, make sure you install

a DSL filter (not included) between the

telephone line cord and telephone wall

jack. Contact your DSL service provider

for more information.

Connect the telephone base

Connect the charger

Mount the telephone base

4

5

2

4

5

2

4

5

2

4

5

2

8

Install the battery

Install the battery as shown below.

NOTE

S

• Use only the battery provided.

• Charge the battery provided with this

product only in accordance with the

instructions and limitations specified in this

manual.

• If the handset will not be used for a long

time, disconnect and remove the battery to

prevent possible leakage.

Check the battery level

After you have installed the battery,

check the battery level on the handset

screen.

• If the battery icon is , or , then go

to Before use section to set the date

and time, and set the answering

system through voice guide.

• If the screen is blank, or flashes,

then the battery needs to be

charged. Go to Charge the battery

section before you do any setting or

operation.

Charge the battery

Place the handset in the handset

charger to charge.

Once you have installed the battery,

the handset LCD display indicates the

battery status (see the table below).

Battery

indicators

Battery

status

Action

The screen

is blank, or

shows Put

in charger

and

flashes.

The battery

has no

charge or

very little

charge. The

handset

cannot be

used.

Charge

without

interruption

(at least 30

minutes).

The screen

shows Low

battery and

flashes.

The battery

has enough

charge to be

used for a

short time.

Charge

without

interruption

(at least 30

minutes).

THIS SIDE UP

9

The screen

shows

HANDSET X.

The battery is

charged.

To keep

the battery

charged,

place it in

the handset

charger when

not in use.

When it is fully charged, you can expect

the following performance:

Operation Operating time

While in handset

use (talking*)

Seven hours

While in

speakerphone

mode (talking*)

Three and a half

hours

While not in use

(standby**)

Five days

* Operating times vary depending on your actual

use and the age of the battery.

** Handset is not charging or in use.

NOTE

S

• Place the handset in the charger will

bypass the set date and time, and voice

guide.

• For best performance, keep the handset in

the charger when not in use.

• The battery is fully charged after 11 hours

of continuous charging.

• If you place the handset in the charger

without plugging in the battery, the screen

displays NO BATTERY.

To manually set the date and time

and the answering system, refer to

Configure your telephone and Set

your built-in answering system

sections.

To manually initiate the voice guide,

refer to Voice guide under Set your

built-in answering system section.

Before use

After you install your telephone or

power returns following a power outage

and battery depletion, the handset will

prompt you to set the date and time,

and the answering system through

voice guide.

Set date and time

NOTE

• Make sure you set the date and time

including the year correctly; otherwise the

answering system does not announce the

correct day of the week for your recorded

messages time stamp.

1. Use the dialing keys (0-9) to enter

the month (MM), date (DD) and year

(YY). Then press SELECT.

2. Use the dialing keys (0-9) to enter the

hour (HH) and minute (MM). Then

press or to choose AM or PM.

3. Press SELECT to save.

After the setting for the date and time, the

screen will display Voice guide to... and

set up Ans sys? alternatively.

Set answering system through

voice guide

This feature assists you to do the basic

setup of the answering system. You can

follow the voice guide to record your own

announcement, set the number of rings

and the message alert tone.

1. Press SELECT to start the voice

guide for the answering system

setup. You hear the voice prompt

“Hello! This voice guide will assist

you with the basic setup of your

answering system.”

2. Setup your answering system by

inputting the designated numbers as

instructed in the voice guide.

10

Check for dial tone

Press . If you hear a dial tone, the

installation is successful.

If you do not hear a dial tone:

• Make sure the installation procedures

described above are properly done.

• It may be a wiring problem. If you

have changed your telephone

service to digital service from a cable

company or a VoIP service provider,

the telephone line may need to be

rewired to allow all existing telephone

jacks to work. Contact your cable/

VoIP service provider for more

information.

Operating range

This cordless telephone operates with

the maximum power allowed by the

Federal Communications Commission

(FCC). Even so, this handset and

telephone base can communicate over

only a certain distance - which can

vary with the locations of the telephone

base and handset, the weather, and the

layout of your home or office.

When the handset is out of range, the

handset displays Out of range or no pwr

at base.

If there is a call while the handset is

out of range, it may not ring, or if it

does ring, the call may not connect well

when you press . Move closer to the

telephone base, and then press

to answer the call. If the handset

moves out of range during a telephone

conversation, there may be interference.

To improve reception, move closer to the

telephone base.

Configure your telephone

Using the phone menu

1. Press MENU when the phone is not

in use.

2. Press or until the screen displays

the desired feature menu.

3. Press SELECT to enter that menu.

• To return to the previous menu, press

CANCEL on the phone.

• To return to idle mode, press and hold

CANCEL on the phone.

Set language

The LCD language is preset to English.

You can select English, French or

Spanish to be used in all screen displays.

1. Press MENU when the phone is not

in use.

2. Press or to choose Settings,

and then press SELECT.

3. Press SELECT to choose LCD

language.

4. Press or to choose English,

Français or Español, and then press

SELECT. Then the screen returns

to the previous menu. You hear a

confirmation tone.

NOTE

If you accidentally change the LCD language

to French or Spanish, you can reset it to

English easily by pressing MENU then

entering 364#.

11

Set date and time

NOTE

• Make sure you set the date and time

including the year correctly; otherwise the

answering system does not announce the

correct day of the week for your recorded

messages time stamp.

1. Press MENU when the phone is not

in use.

2. Press or to choose Set date/time,

and then press SELECT.

3. Use the dialing keys (0-9) to enter

the month (MM), date (DD) and year

(YY). Then press SELECT.

4. Use the dialing keys (0-9) to enter the

hour (HH) and minute (MM). Then

press or to choose AM or PM.

5. Press SELECT to save. Then the

screen returns to the previous menu.

You hear a confirmation tone.

Dial mode

The dial mode is preset to touch-

tone dialing. If you have pulse (rotary)

service, you need to change the dial

mode to pulse dialing before using the

telephone to make a call.

1. Press MENU when the phone is not

in use.

2. Press or to choose Settings,

and then press SELECT.

3. Press or to choose Dial mode,

and then press SELECT.

4. Press or to choose Touch-tone

or Pulse.

5. Press SELECT to save your

selection. Then the screen returns

to the previous menu. You hear a

confirmation tone.

Temporary tone dialing

If you have pulse (rotary) service only,

you can switch from pulse to touch-tone

dialing temporarily during a call. This

is useful if you need to send touch-

tone signals to access your telephone

banking or long distance services.

1. During a call, press .

2. Use the dialing keys to enter the

number. The telephone sends

touch-tone signals. The telephone

automatically returns to pulse dialing

mode after you end the call.

12

Telephone Operations Make a call

Using a cordless handset:

1. Press or on the handset.

2. When you hear a dial tone, dial the

number.

Using the telephone base:

1. Lift the corded handset, or press

/SPEAKER.

2. When you hear a dial tone, dial the

number.

NOTE

S

• The screen shows the elapsed time as

you talk (in hours, minutes and seconds).

• While entering numbers, press and hold

PAUSE to insert a dialing pause

(a p appears).

Predial a call

Using a cordless handset:

1. Enter the telephone number.

• Press DELETE or CANCEL to

make corrections.

2. Press or to dial.

NOTE

S

• The handset displays Unable to call if

the telephone line is in use.

• The handset shows the elapsed time as

you talk (in hours, minutes and seconds).

• Press and hold PAUSE to insert a dialing

pause (a p appears).

Using the telephone base:

1. Enter the telephone number using the

dialing keys (0-9).

• Press X/DELETE to make

corrections.

Telephone base control key panel:

Handset control key panel:

13

2. Lift the corded handset, or press

/SPEAKER to dial.

NOTE

S

• If you make a predial call while the

telephone line is in use, the screen

displays Unable to call.

• Press and hold PAUSE to insert a dialing

pause (a p appears).

Answer a call

Using a cordless handset:

• Press , , or any dialing key (0-9,

, or ) to answer.

Using the telephone base:

• Lift the corded handset, or press

/SPEAKER or any of the dialing

keys.

End a call

Using a cordless handset:

• Press OFF or place the handset in

the handset charger.

Using the telephone base:

1. When you are using the corded

handset, place it on the telephone

base.

2. When you are using the base

speakerphone, press /SPEAKER.

Speakerphone

Handset speakerphone:

When the cordless handset is on a

call, press to switch between the

handset speakerphone and the handset

earpiece.

When the speakerphone is active, the

handset displays Speaker and the

light turns on.

Telephone base speakerphone:

When the corded handset is on a call,

press /SPEAKER to switch between

the telephone base speakerphone and

the corded handset.

When the speakerphone is active, the

telephone base displays Speaker and

the /SPEAKER light turns on.

Volume

To adjust the listening volume on

a cordless handset:

• During a call, press /VOLUME or

/VOLUME.

To adjust the listening volume at

the telephone base:

During a call, press VOL or VOL .

NOTE

S

• The handset and speakerphone volume

settings are independent.

• When the volume reaches the minimum

or maximum setting, you hear two beeps.

Mute

The mute function allows you to hear

the other party but the other party

cannot hear you.

• During a call, press MUTE. The

screen displays Muted until the mute

function is turned off.

• Press MUTE again to resume the

conversation. The screen displays

Microphone on briefly.

14

Join a call in progress

You can use the telephone base and

a cordless handset, or two cordless

handsets at a time on an outside call.

To join a call with a cordless

handset:

• When a handset or the telephone

base is already on a call, press or

on another handset to join the call.

• Press OFF or place the handset in

the handset charger to exit the call.

The call continues until both devices

hang up.

To join a call with the telephone

base:

• Lift the corded handset or press

/SPEAKER.

• Place the corded handset back to the

telephone base or press

/SPEAKER to exit the call. The call

continues until both devices hang up.

Call waiting

When you subscribe to call waiting

service with your telephone service

provider, you hear an alert tone if there

is an incoming call while you are on

another call.

• Press FLASH to put the current call

on hold and take the new call.

• Press FLASH at any time to switch

back and forth between calls.

If you also subscribe to caller ID

service, it will let you see the name and

telephone number of the caller during

call waiting.

It may be necessary to change your

telephone service to use this feature.

Contact your telephone service provider

if:

• You have both caller ID and call

waiting, but as separate service (you

may need to combine these service);

• You have only caller ID service, or

only call waiting service; or

• You do not subscribe to caller ID or

call waiting services.

There are fees for caller ID services. In

addition, services may not be available

in all areas.

Chain dialing

Use this feature to initiate a dialing

sequence from numbers stored in the

phonebook, caller ID log or redial list

while you are on a call.

Chain dialing can be useful if you wish

to access other numbers (such as bank

account numbers or access codes)

from the phonebook, caller ID log or

redial list.

To access a number from the

phonebook while on a call:

1. Press MENU.

2. Press SELECT to select Phonebook.

3. Press or to scroll to the desired

entry.

4. Press SELECT to dial the displayed

number.

To access a number from the

caller ID log while on a call:

1. Press MENU.

2. Press or to choose Caller ID log,

and then press SELECT.

3. Press or to scroll to the desired

entry.

La page charge ...

VTech CS6949-2 Manuel utilisateur

Ce manuel convient également à

VTech CS6949-2 Manuel utilisateur

dans d''autres langues

Documents connexes