AEG ITE42600KB Manuel utilisateur

USER

MANUAL

EN User Manual 2

Teppan yaki grill plate

FR Notice d'utilisation 20

Grill Teppan yaki

DE Benutzerinformation 40

Teppan Yaki Grillplatte

ITE42600KB

CONTENTS

1. SAFETY INFORMATION.............................................................................................2

2. SAFETY INSTRUCTIONS.............................................................................................4

3. INSTALLATION............................................................................................................7

4. PRODUCT DESCRIPTION.........................................................................................10

5. DAILY USE..................................................................................................................11

6. HINTS AND TIPS........................................................................................................13

7. CARE AND CLEANING.............................................................................................16

8. TROUBLESHOOTING............................................................................................... 17

9. TECHNICAL DATA.................................................................................................... 18

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have created it to give you

impeccable performance for many years, with innovative technologies that help

make life simpler - features you might not find on ordinary appliances. Please

spend a few minutes reading to get the very best from it.

Visit our website for:

Get usage advice, brochures, trouble shooter, service information:

www.aeg.com/webselfservice

Register your product for better service:

www.registeraeg.com

Buy Accessories, Consumables and Original spare parts for your appliance:

www.aeg.com/shop

CUSTOMER CARE AND SERVICE

Always use original spare parts.

When contacting our Authorised Service Centre, ensure that you have the

following data available: Model, PNC, Serial Number.

The information can be found on the rating plate.

Warning / Caution-Safety information

General information and tips

Environmental information

Subject to change without notice.

1.

SAFETY INFORMATION

Before the installation and use of the appliance,

carefully read the supplied instructions. The

manufacturer is not responsible for any injuries or

damage that are the result of incorrect installation or

usage. Always keep the instructions in a safe and

accessible location for future reference.

www.aeg.com

2

1.1 Children and vulnerable people safety

• This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or

instruction concerning the use of the appliance in a

safe way and understand the hazards involved.

• Children between 3 and 8 years of age and persons

with very extensive and complex disabilities shall be

kept away from the appliance unless continuously

supervised.

• Children of less than 3 years of age should be kept

away from the appliance unless continuously

supervised.

• Do not let children play with the appliance.

• Keep all packaging away from children and dispose of

it appropriately.

• Keep children and pets away from the appliance when

it operates or when it cools down. Accessible parts

may become hot during use.

• If the appliance has a child safety device, it should be

activated.

• Children shall not carry out cleaning and user

maintenance of the appliance without supervision.

1.2

General Safety

•

WARNING: The appliance and its accessible parts

become hot during use. Care should be taken to

avoid touching heating elements.

• WARNING: Unattended cooking on a hob with fat or

oil can be dangerous and may result in fire.

• NEVER try to extinguish a fire with water, but switch

off the appliance and then cover flame e.g. with a lid

or a fire blanket.

• CAUTION: The appliance must not be supplied

through an external switching device, such as a timer,

ENGLISH

3

or connected to a circuit that is regularly switched on

and off by a utility.

• CAUTION: The cooking process has to be supervised.

A short term cooking process has to be supervised

continuously.

• WARNING: Danger of fire: Do not store items on the

cooking surfaces.

• Metallic objects such as knives, forks, spoons and lids

should not be placed on the hob surface since they

can get hot.

• Do not use the appliance before installing it in the

built-in structure.

• Do not use a steam cleaner to clean the appliance.

• After use, switch off the hob element by its control

and do not rely on the pan detector.

• If the glass ceramic surface / glass surface is cracked,

switch off the appliance and unplug it from the mains.

In case the appliance is connected to the mains

directly using junction box, remove the fuse to

disconnect the appliance from power supply. In either

case contact the Authorised Service Centre.

• If the supply cord is damaged, it must be replaced by

the manufacturer, an authorized Service or similarly

qualified persons in order to avoid a hazard.

• WARNING: Use only hob guards designed by the

manufacturer of the cooking appliance or indicated by

the manufacturer of the appliance in the instructions

for use as suitable or hob guards incorporated in the

appliance. The use of inappropriate guards can cause

accidents.

2.

SAFETY INSTRUCTIONS

2.1 Installation

WARNING!

Only a qualified person must

install this appliance.

WARNING!

Risk of injury or damage to

the appliance.

• Remove all the packaging.

• Do not install or use a damaged

appliance.

www.aeg.com4

• Follow the installation instructions

supplied with the appliance.

• Keep the minimum distance from

other appliances and units.

• Always take care when moving the

appliance as it is heavy. Always use

safety gloves and enclosed footwear.

• Seal the cut surfaces with a sealant to

prevent moisture to cause swelling.

• Protect the bottom of the appliance

from steam and moisture.

• Do not install the appliance adjacent

to a door or under a window. This

prevents hot cookware falling from

the appliance when the door or the

window is opened.

• If the appliance is installed above

drawers make sure that the space,

between the bottom of the appliance

and the upper drawer, is sufficient for

air circulation.

• The bottom of the appliance can get

hot. Make sure to install a separation

panel made from plywood, kitchen

carcass material or other non-

flammable materials under the

appliance to prevent access to the

bottom.

• The separation panel has to cover the

area under the hob completely.

• Make sure that the ventilation space

of 2 mm, between the worktop and

the front of the below unit, is free.

The warranty does not cover damages

caused by the lack of an adequate

ventilation space.

2.2 Electrical Connection

WARNING!

Risk of fire and electric

shock.

• All electrical connections should be

made by a qualified electrician.

• The appliance must be earthed.

• Before carrying out any operation

make sure that the appliance is

disconnected from the power supply.

• Make sure that the parameters on the

rating plate are compatible with the

electrical ratings of the mains power

supply.

• Make sure the appliance is installed

correctly. Loose and incorrect

electricity mains cable or plug (if

applicable) can make the terminal

become too hot.

• Use the correct electricity mains

cable.

• Do not let the electricity mains cable

tangle.

• Make sure that a shock protection is

installed.

• Use the strain relief clamp on the

cable.

• Make sure the mains cable or plug (if

applicable) does not touch the hot

appliance or hot cookware, when you

connect the appliance to the near

sockets.

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to

the mains plug (if applicable) or to the

mains cable. Contact our Authorised

Service Centre or an electrician to

change a damaged mains cable.

• The shock protection of live and

insulated parts must be fastened in

such a way that it cannot be removed

without tools.

• Connect the mains plug to the mains

socket only at the end of the

installation. Make sure that there is

access to the mains plug after the

installation.

• If the mains socket is loose, do not

connect the mains plug.

• Do not pull the mains cable to

disconnect the appliance. Always pull

the mains plug.

• Use only correct isolation devices: line

protecting cut-outs, fuses (screw type

fuses removed from the holder), earth

leakage trips and contactors.

• The electrical installation must have

an isolation device which lets you

disconnect the appliance from the

mains at all poles. The isolation

device must have a contact opening

width of minimum 3 mm.

2.3 Use

WARNING!

Risk of injury, burns and

electric shock.

• Remove all the packaging, labelling

and protective film (if applicable)

before first use.

ENGLISH

5

• This appliance is for household use

only.

• Do not change the specification of

this appliance.

• Make sure that the ventilation

openings are not blocked.

• Do not let the appliance stay

unattended during operation.

• Set the cooking zone to “off” after

each use.

• Do not rely on the pan detector.

• Do not put cutlery or saucepan lids on

the cooking zones. They can become

hot.

• Do not operate the appliance with

wet hands or when it has contact with

water.

• Do not use the appliance as a work

surface or as a storage surface.

• If the surface of the appliance is

cracked, disconnect immediately the

appliance from the power supply. This

to prevent an electrical shock.

• Users with a pacemaker must keep a

distance of minimum 30 cm from the

induction cooking zones when the

appliance is in operation.

• When you place food into hot oil, it

may splash.

WARNING!

Risk of fire and explosion

• Fats and oil when heated can release

flammable vapours. Keep flames or

heated objects away from fats and oils

when you cook with them.

• The vapours that very hot oil releases

can cause spontaneous combustion.

• Used oil, that can contain food

remnants, can cause fire at a lower

temperature than oil used for the first

time.

• Do not put flammable products or

items that are wet with flammable

products in, near or on the appliance.

WARNING!

Risk of damage to the

appliance.

• Do not keep hot cookware on the

control panel.

• Do not put a hot pan cover on the

glass surface of the hob.

• Do not let cookware boil dry.

• Be careful not to let objects or

cookware fall on the appliance. The

surface can be damaged.

• Do not activate the cooking zones

with empty cookware or without

cookware.

• Do not put aluminium foil on the

appliance.

• Cookware made of cast iron,

aluminium or with a damaged bottom

can cause scratches on the glass /

glass ceramic. Always lift these

objects up when you have to move

them on the cooking surface.

• This appliance is for cooking

purposes only. It must not be used for

other purposes, for example room

heating.

2.4 Care and cleaning

• Clean the appliance regularly to

prevent the deterioration of the

surface material.

• Deactivate the appliance and let it

cool down before you clean it.

• Disconnect the appliance from the

electrical supply before maintenance.

• Do not use water spray and steam to

clean the appliance.

• Clean the appliance with a moist soft

cloth. Use only neutral detergents. Do

not use abrasive products, abrasive

cleaning pads, solvents or metal

objects.

2.5 Service

• To repair the appliance contact the

Authorised Service Centre.

• Use original spare parts only.

2.6 Disposal

WARNING!

Risk of injury or suffocation.

• Contact your municipal authority for

information on how to discard the

appliance correctly.

• Disconnect the appliance from the

mains supply.

• Cut off the mains electrical cable

close to the appliance and dispose of

it.

www.aeg.com

6

3. INSTALLATION

WARNING!

Refer to Safety chapters.

3.1 Before the installation

Before you install the appliance, write

down the information bellow from the

rating plate. The rating plate is on the

bottom of the appliance.

Serial number ...........................

3.2 Built-in appliance

Only use the built-in appliances after you

assemble the appliance into correct

built-in units and work surfaces that align

to the standards.

3.3 Connection cable

• The appliance is supplied with a

connection cable.

• To replace the damaged mains cable

use the following (or higher) mains

cable type: H05V2V2-F T min 90°C.

Speak to your local Service Centre.

3.4 Attaching the seal - On-top

installation

1. Clean the worktop around the cut

out area.

2. Attach the supplied 2x6mm seal

stripe to the lower edge of the

appliance, along the outer edge of

the glass ceramic. Do not stretch it.

Make sure that the ends of the seal

stripe are located in the middle of

one side of the appliance.

3. Add some millimetres to the length

when you cut the seal stripe.

4. Join the two ends of the seal stripe

together.

3.5 Assembly

min.

50mm

min.

500mm

min.

2mm

360

520

ENGLISH 7

min. 2 mm

A

B

A

12 mm

28 mm

38 mm

B

57 mm

41 mm

31 mm

min

30 mm

min. 500 mm

< 20 mm

> 20 mm

min. 2 mm

A

B

A

12 mm

28 mm

38 mm

B

57 mm

41 mm

31 mm

min. 500 mm

min.

12 mm

min.

2 mm

3.6 Installation of more than

one hob

Supplied accessories: connection bar,

heat-resistant silicone, rubber shape,

sealing stripe.

www.aeg.com

8

Use only a special heat-

resistant silicone.

The worktop cutout

Distance

from the

wall

minimum 50 mm

Length 490 mm

Width the sum of all widths of appli-

ances that you install minus

20 mm

Example:

360 mm

520 mm

490 mm

360 mm

+ - =

20 mm 700 mm

Assembly

• Calculate correct cutout dimensions.

• Prepare the worktop cutout.

• Place the appliances on a soft surface

(e.g. a blanket) with the bottom side

up.

• In the case of the Teppan Yaki, attach

the supplied seal stripe to its lower

edge, along the outer edge of the

glass ceramic. Loosely screw the

fixing plates into the correct holes in

the protection casing.

• Insert the first appliance into the

worktop cutout. Mount the

connection bar under the appliance

so that a half of its width is still visible

- it will support the next appliance.

• For the Teppan Yaki, loosely screw in

the fixing plates to the worktop from

below (at the front and the rear of the

appliance).

• Insert the next appliance into the

worktop cutout. Make sure that the

front edges of the appliances are on

the same level.

• Fix appliances other than Teppan Yaki

with the use of snap-in springs.

• At the end, tighten the screws of the

Teppan Yaki.

• Use silicone to seal the gaps between

the appliances and those between the

appliances and the worktop.

• Press the rubber shape firmly against

the glass ceramic and move it slowly

along the edges to squeeze out

excess silicone.

• Put some soapy water on the silicone

and smoothen out the edges with

your finger.

• Do not touch the silicone until it

hardens, it can last for about a day.

• Carefully remove the silicone

squeeze-out with a shaving razor.

• Clean the glass surface.

ENGLISH

9

4. PRODUCT DESCRIPTION

4.1 The most important

features of your appliance

• The roasting surface is comprised of

two zones, front and rear. For more

information, refer to "Technical data".

• The roasting surface consists of 2

layers of stainless steel with a layer of

aluminium between them. It has a

high thermal capacity, which prevents

temperatures from quickly decreasing

(e.g. when you prepare meat directly

from the refrigerator).

• Each TeppanYaki roasting surface is

unique because it is handmade by

grinding specialists. Differences in the

grinding patterns are normal and do

not affect the operation of the

appliance.

• The groove around the edge:

– Decreases the temperature

around the appliance, which

enables you to install it in

different types of kitchen

worktops.

– Absorbs the heat and prevents

the expansion of the heated

roasting surface.

– Collects small food remains and

liquids which you can easily

remove after cooking.

• The display shows the temperature

setting. The thermostat keeps the

necessary temperature constant, to

prevent food from overheating. This

allows for low-fat cooking that keeps

the nutritional values of the food.

• The food is heated directly on the

roasting surface, with or without oil.

You can also use cookware.

• The roasting surface heats up to the

temperature of 180 °C in

approximately 4 minutes. The

temperature of the roasting surface

decreases from 180 °C to 100 °C in

approximately 25 minutes, and to 60

°C in approximately 60 minutes.

4.2 Cooking surface layout

2

1

Roasting zone

2

Control panel

www.aeg.com10

4.3 Control panel layout

1 2 4 5 63 97

10

8

1

To activate and deactivate the

appliance.

2

To activate and deactivate Lock or

Child Safety Device.

3

To show the active zone.

4

CountUp Timer indicator.

5

Count Down Timer indicator.

6

To show the temperature and time.

7

To select Timer functions.

8

/ To increase or decrease the

time.

9

To activate and deactivate

Cleaning.

10

To set a temperature 0 - 220.

4.4 OptiHeat Control (3 step

Residual heat indicator)

WARNING!

/ / There is a risk of

burns from residual heat.

The indicators show the level of the

residual heat for the cooking zones you

are currently using. When the hob is

deactivated, the indicators are still

visible. When the hob is cold enough,

they disappear. The indicators may also

come on for the neighbouring cooking

zones even if you are not using them.

The induction cooking zones produce

the heat necessary for the cooking

process directly in the bottom of the

cookware. The glass ceramic is heated by

the heat of the cookware.

5. DAILY USE

WARNING!

Refer to Safety chapters.

5.1 Activating and

deactivating

Touch for 1 second to activate or

deactivate the appliance.

The control bars come on after you

activate the appliance and go off after

you deactivate the appliance.

5.2 Setting temperature

Always preheat the roasting

surface before cooking.

Each roasting zone has it own control

bar.

To set or change the temperature:

Touch the control bar at the correct

value or move your finger along the

control bar until you reach the correct

temperature.

ENGLISH 11

The display blinks until the roasting zone

reaches the set temperature. Then a

signal sounds and the display shows the

temperature.

5.3 Timer

Count Down Timer

Use this function to specify how long a

roasting zone should operate during a

single cooking session.

Set the temperature for the appropriate

roasting zone and then set the function.

1. Touch to activate the function or

change the time.

The timer digits and the indicators

and come on the display. turns

red, and turns white.

If the timer is not set, all indicators

disappear after 4 seconds.

2. Touch

or to set the time (00 -

99 minutes).

After 3 seconds, the timer starts to count

down automatically. The indicators ,

, and disappear. stays red.

When the time comes to an end, a signal

sounds and blinks. To stop the

signal, touch

.

To deactivate the function: touch . The

indicators

and come on. Use or

to set on the display.

Alternatively, set the heat level to 0. As a

result, a signal sounds and the timer is

cancelled.

CountUp Timer (The count

up timer)

You can use this function to monitor how

long a roasting zone operates.

Touch twice to activate the function.

The indicator turns red, the timer

starts to count up automatically.

To deactivate the function: touch .

When the indicators light up, touch .

Minute Minder

You can use this function when the

appliance is activated but the roasting

zones do not operate.

To see the control panel, place a pot on

a roasting zone.

1.

Touch

, until the indicator turns

red, to activate the function.

2. Touch or to set the time.

The function starts automatically after 4

seconds. The indicators , , and

disappear. stays red.

When you set the function, you can

remove the pot.

When the time comes to an end, a signal

sounds and flashes. Touch to

stop the signal.

To deactivate the function: touch . The

indicators and light up. Use or

to set on the display.

The function has no effect

on the operation of the

roasting zone.

5.4 Lock

You can lock the control panel while the

appliance operates. It prevents an

accidental change of the temperature.

You need to activate the

function for each appliance

separately.

Set the temperature first.

Touch to activate the function.

www.aeg.com

12

The symbol turns red and blinks.

To deactivate the function, touch . The

symbol turns white.

When you deactivate the

appliance, you also

deactivate this function.

5.5 Child Safety Device

This function prevents an accidental

operation of the appliance.

You need to activate the

function for each appliance

separately.

Activate the appliance first and do not

set any temperature.

Touch until it turns red to activate the

function.

The control bars disappear. Deactivate

the appliance.

When you deactivate the

appliance, the function is still

active.

To deactivate the function for only one

cooking time: Activate the appliance

with . comes on. Touch until it

turns white. The control bars appear. Set

the temperature within 50 seconds. You

can operate the appliance. When you

deactivate the appliance with the

function is still active.

To deactivate the function

permanently: Activate the appliance and

do not set any temperature. Touch

until it turns white. The control bars

appear. Deactivate the appliance.

5.6 OffSound Control

(Deactivating and activating

the sounds)

Deactivate the appliance. Touch for 3

seconds. The display comes on and goes

out. Touch for 3 seconds. or

comes on. Touch of the timer to

choose one of the following:

• - the sounds are off

• - the sounds are on

To confirm your selection wait until the

appliance deactivates automatically.

When the function is set to

you can

hear the sounds only when:

• you touch

• Minute Minder comes down

• Count Down Timer comes down

• you put something on the control

panel.

6.

HINTS AND TIPS

WARNING!

Refer to Safety chapters.

6.1 Energy saving

• If it is possible, always put the lids on

the cookware.

• Put cookware on a cooking zone

before you start it.

• Use the residual heat to keep the

food warm or to melt it.

6.2 Öko Timer (Eco Timer)

To save energy, the heater of the

roasting zone deactivates before the

count down timer sounds. The difference

in the operation time depends on the

temperature setting and the length of

the roasting.

6.3 Preparing food with the

TeppanYaki

You prepare the food directly on the

roasting surface, with or without oil / fat.

You can also use pots or pans, but the

cookware does not heat up as quickly as

it does on a glass-ceramic appliance or a

gas appliance.

You can cook or keep side dishes or

sauces warm in pots or pans. Put the

cookware directly on the roasting

surface.

ENGLISH

13

The manufacturer does not recommend

boiling large quantities of water on the

roasting surface (e.g. for spaghetti).

The noises are normal and

do not indicate any

malfunction.

Do not put cookware in the middle of

the roasting surface, to avoid uneven

heating. Frying at the conjunction of the

zones can cause uneven browning (e.g.

with pancakes).

6.4 Examples of cooking applications

Using fats and oils

Fat / Oil Max. temperature

(°C)

Fat / oil smoke point (°C)

Butter 130 175

Pork fat 170 185 - 205

Beef fat 180 205

Olive oil - extra virgin 180 210

Sunflower oil 200 225 - 245

Peanut oil - refined oil 200 225 - 230

Coconut oil 200 175

When the temperature is too high, the

fat begins to produce smoke. This

temperature is called the smoke point.

The table below shows examples of food

types and provides you with the optimal

temperatures and suggested cooking

times. The parameters may vary

depending on the temperature, quality,

consistency, and quantity of food.

Always preheat the

appliance.

Food to be cooked Temperature (°C) Time / Tips

Fish and shellfish 140 – 160

Salmon fillets 160 8 minutes, turn after 4 minutes.

King prawns (without shell) 140 6 minutes, turn after 3 minutes.

Shark steaks, approximately

2.5 cm thick

160 10 minutes, turn after 5 minutes.

Sole, Müllerin Art (fried in

butter)

140 8 minutes, turn after 4 minutes, light

side first.

Plaice filets 140 6 minutes, turn after 3 minutes.

Veal 140 – 180

Veal chop 180 10 minutes, turn after 5 minutes.

Veal medallions, 4 cm thick 160 10 minutes, turn after 5 minutes.

www.aeg.com14

Food to be cooked Temperature (°C) Time / Tips

Veal steaks, 3 - 4 cm thick 160 6 minutes, turn after 3 minutes.

Veal escalopes, natural 180 5 minutes, turn after 2,5 minutes.

Veal fricasee in cream sauce 180 6 minutes, turn after 3 minutes. The

meat strips must not be stuck to

each other.

Beef 160 – 180

Beef steak bleu - very raw 180 2 minutes, turn after 1 minute.

Beef steak raw 180 6 minutes, turn after 3 minutes.

Beef steak medium 180 8 minutes, turn after 2 minutes.

Beef steak - well done 180 8 minutes, turn after 4 minutes. With-

out fatty substances, the roasting

time increases by approximately

20%.

Hamburger 160 6 - 8 minutes, turn after 3 - 4 minutes.

Châteaubriand 160 then 100 Sauté the meat in oil on all sides

(turn only when the meat does not

stick to the pan). Finish off on one

side for 10 minutes (100 °C).

Pork 160 – 180

Pork medallions 160 8 minutes, turn after 4 minutes (de-

pending on the thickness).

Pork steaks 180 8 minutes, turn after 4 minutes.

Pork escalopes 160 6 minutes, turn after 3 minutes.

Spare ribs

1)

160 8 - 10 minutes, turn several times.

Pork skewer 160 6 - 8 minutes, sauté well on all sides.

Lamb 160 – 180

Lamb chops 180 10 minutes, turn after 5 minutes.

Filet of lamb 160 10 minutes, turn after 5 minutes. The

filet must be fried on both sides.

Lamb steaks 160 6 - 8 minutes, turn after 3 - 4 minutes.

Poultry 140 – 160

Chicken supreme 140 8 - 10 minutes, turn after 4 - 5 mi-

nutes, under a cooking lid.

Turkey breast strips 160 6 minutes, turn several times.

ENGLISH 15

Food to be cooked Temperature (°C) Time / Tips

Sausages 160 Turn as needed.

Fried egg 140 Turn as needed.

Crepes / Omelettes 140 - 160 Turn as needed.

Fruits 140 - 160 Turn as needed.

Vegetables 140 - 160 10 - 20 minutes, turn several times.

Vegetables 140 - 160 10 - 15 minutes, under a cooking lid

(turn halfway through).

Frying precooked rice 140 - 160 10 - 15 minutes, turn several times.

Frying precooked noodles 140 - 160 15 - 20 minutes, turn halfway

through.

1)

Precook them first.

7. CARE AND CLEANING

WARNING!

Refer to Safety chapters.

7.1 General information

Clean the appliance after each use.

Always use cookware with a clean base.

WARNING!

Sharp objects and abrasive

cleaning agents will damage

the appliance.

Wooden utensils, e.g. spatulas, are

perfectly safe to work with. Small

scratches or stains on the surface have

no effect on how the appliance operates.

7.2 Cleaning function

WARNING!

Always use protective gloves

while cleaning the

appliance, to protect your

hands against the heat.

1. Touch . Each roasting zone is set

to 80°C. The display blinks until the

temperature reaches 80°C. The

function locks the control panel, but

not

.

2. When the temperature reaches 80°C,

an acoustic signal sounds, and the

control panel becomes unlocked.

3. Put ice cubes one by one on the

roasting zones (you can also use cold

water). Use a spatula to remove food

remains. Remember to clean the

groove around the appliance too.

Remove limestone or white protein

residue using citric acid.

4. Dry the appliance with a clean cloth.

7.3 Cleaning when the

appliance is cold

1. Apply a cleaning agent to the

roasting surface and let it set for 5

minutes.

2. Remove the roasting residue with a

spatula.

3. Clean the appliance with a moist

cloth.

4. Dry the appliance with a clean cloth.

5. When the appliance is dry, rub the

roasting surface with some cooking

oil.

www.aeg.com

16

8. TROUBLESHOOTING

WARNING!

Refer to Safety chapters.

8.1 What to do if...

Problem Possible cause Remedy

You cannot activate or oper-

ate the appliance.

The appliance is not connec-

ted to an electrical supply or

it is connected incorrectly.

Check if the appliance is cor-

rectly connected to the elec-

trical supply. Refer to the

connection diagram.

The fuse is blown. Make sure that the fuse is

the cause of the malfunction.

If the fuse is blown again

and again, contact a quali-

fied electrician.

You touched 2 or more sen-

sor fields at the same time.

Touch only one sensor field.

There is water or fat stains

on the control panel.

Clean the control panel.

An acoustic signal sounds

and the appliance deacti-

vates. An acoustic signal

sounds when the appliance

is deactivated.

You put something on one

or more sensor fields.

Remove the object from the

sensor fields.

The appliance deactivates. You put something on the

sensor field .

Remove the object from the

sensor field.

Residual heat indicator does

not come on.

A zone is not hot because it

operated only for a short

time

If the zone operated suffi-

ciently long to be hot, speak

to an Authorised Service

Centre.

The sensor fields become

hot.

The cookware is too large or

you put it too near to the

controls.

Put large cookware on the

rear zones, if possible.

There is no sound when you

touch the panel sensor

fields.

The sounds are deactivated. Activate the sounds.

Refer to "Daily use".

comes on.

Child Safety Device or Lock

operate.

Refer to "Daily use".

The control bar blinks. There is no cookware on the

zone or the zone is not fully

covered.

Put cookware on the zone so

that it fully covers the roast-

ing zone.

ENGLISH 17

Problem Possible cause Remedy

The cookware is unsuitable. Use suitable cookware. Refer

to "Hints and tips".

The diameter of the bottom

of the cookware is too small

for the zone.

Use cookware with correct

dimensions. Refer to "Tech-

nical data".

and a number come on.

There is an error in the appli-

ance.

Deactivate the appliance

and activate it again after 30

seconds. If comes on again,

disconnect the appliance

from the electrical supply.

After 30 seconds, connect

the appliance again. If the

problem continues, speak to

an Authorised Service Cen-

tre

You can hear a constant

beep noise.

The electrical connection is

incorrect.

Disconnect the appliance

from the electrical supply.

Ask a qualified electrician to

check the installation.

8.2 If you cannot find a

solution...

If you cannot find a solution to the

problem yourself, contact your dealer or

an Authorised Service Centre. Give the

data from the rating plate. Make sure,

you operated the hob correctly. If not the

servicing by a service technician or

dealer will not be free of charge, also

during the warranty period. The

instructions about the Service Centre and

conditions of guarantee are in the

guarantee booklet.

9. TECHNICAL DATA

9.1 Rating plate

Model ITE42600KB PNC 949 597 551 00

Typ 61 A2A 80 AD 220 - 240 V 50 - 60 Hz

Induction 2.8 kW Made in Germany

Ser.Nr. ................. 2.8 kW

AEG

9.2 Roasting zones specification

Roasting zone Nominal power [W]

Front 1400

Rear 1400

www.aeg.com18

The power of the roasting zones can be

different in some small range from the

data in the table. It changes with the

material and dimensions of the

cookware.

10. ENVIRONMENTAL CONCERNS

Recycle materials with the symbol .

Put the packaging in relevant containers

to recycle it. Help protect the

environment and human health by

recycling waste of electrical and

electronic appliances. Do not dispose of

appliances marked with the symbol

with the household waste. Return the

product to your local recycling facility or

contact your municipal office.

ENGLISH 19

TABLE DES MATIÈRES

1. INFORMATIONS DE SÉCURITÉ...............................................................................20

2. CONSIGNES DE SÉCURITÉ......................................................................................23

3. INSTALLATION..........................................................................................................25

4. DESCRIPTION DE L'APPAREIL.................................................................................29

5. UTILISATION QUOTIDIENNE.................................................................................. 30

6. CONSEILS.................................................................................................................. 33

7. ENTRETIEN ET NETTOYAGE...................................................................................36

8. DÉPANNAGE.............................................................................................................37

9. CARACTÉRISTIQUES TECHNIQUES....................................................................... 39

POUR DES RÉSULTATS PARFAITS

Merci d'avoir choisi ce produit AEG. Nous l'avons conçu pour qu'il vous offre des

performances irréprochables pour longtemps, en intégrant des technologies

innovantes qui vous simplifient la vie grâce à des caractéristiques que vous ne

trouverez pas forcément sur des appareils ordinaires. Veuillez prendre quelques

instants pour lire cette notice afin d'utiliser au mieux votre appareil.

Visitez notre site Internet pour :

Obtenir des conseils d'utilisation, des brochures, de l'aide, des informations :

www.aeg.com/webselfservice

Enregistrez votre produit pour obtenir un meilleur service :

www.registeraeg.com

Acheter des accessoires, consommables et pièces de rechange d'origine pour

votre appareil :

www.aeg.com/shop

SERVICE APRÈS-VENTE

Utilisez toujours des pièces d'origine.

Avant de contacter le service après-vente, assurez-vous de disposer des

informations suivantes : Modèle, PNC, numéro de série.

Vous trouverez ces informations sur la plaque signalétique.

Avertissement/Consignes de sécurité

Informations générales et conseils

Informations en matière de protection de l'environnement

Sous réserve de modifications.

1.

INFORMATIONS DE SÉCURITÉ

Avant d'installer et d'utiliser cet appareil, lisez

soigneusement les instructions fournies. Le fabricant ne

pourra être tenu pour responsable des blessures et

dégâts résultant d'une mauvaise installation ou

www.aeg.com

20

La page charge ...

AEG ITE42600KB Manuel utilisateur

AEG ITE42600KB Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents