3com 3CRSHEW696 Manuel utilisateur

Taper
Manuel utilisateur
Wireless LAN USB Adapter
User Guide
3CRSHEW696
Wireless LAN USB
http://www.3com.com/
http://www.support.3com.com/registration/frontpg.pl
Published July 2002
User Guide version 1.0.0
3Com Corporation
5400 Bayfront Plaza
Santa Clara, California
95052-8145
Copyright © 2002 3Com Corporation. All rights reserved. No part of this documentation may be reproduced in any form or by any means or used to
make any derivative work (such as translation, transformation, or adaptation) without written permission from 3Com Corporation.
3Com Corporation reserves the right to revise this documentation and to make changes in content from time to time without obligation on the part
of 3Com Corporation to provide notification of such revision or change.
3Com Corporation provides this documentation without warranty, term, or condition of any kind, either implied or expressed, including, but not
limited to, the implied warranties, terms or conditions of merchantability, satisfactory quality, and fitness for a particular purpose. 3Com may make
improvements or changes in the product(s) and/or the program(s) described in this documentation at any time.
3Com is a registered trademark and the 3Com logo is a trademark of 3Com Corporation. Microsoft and Windows are registered trademarks of
Microsoft Corporation. All other company and product names may be trademarks of the respective companies with which they are associated.
Unless otherwise indicated, 3Com registered trademarks are registered in the United States and may or may not be registered in other countries.
If there is any software on removable media described in this documentation, it is furnished under a license agreement included with the product as
a separate document or in the hard copy documentation. If you are unable to locate a copy, please contact 3Com and a copy will be provided to you.
UNITED STATES GOVERNMENT LEGEND
If you are a United States government agency, then this documentation and the software described herein are provided to you subject to the
following:
All technical data and computer software are commercial in nature and developed solely at private expense. Software is delivered as “Commercial
Computer Software” as defined in DFARS 252.227-7014 (June 1995) or as a “commercial item” as defined in FAR 2.101(a) and as such is provided
with only such rights as are provided in 3Com’s standard commercial license for the software. Technical data is provided with limited rights only as
provided in DFAR 252.227-7015 (Nov 1995) or FAR 52.227-14 (June 1987), whichever is applicable. You agree not to remove or deface any portion
of any legend provided on any licensed program or documentation contained in, or delivered to you in conjunction with, this user guide.
Contents
1
Installing Your Wireless LAN USB Adapter and Wireless LAN Manager
Installation CD 1
Windows XP, 2000, Me, and 98 SE 1
Connecting Your Wireless LAN USB Adapter 2
Confirming Device Installation 2
Installing 3Com Wireless LAN Manager 3
Using Wireless LAN Manager 3
3Com Connection Assistant 3
2
Troubleshooting
5
Diagnosing Problems 5
Uninstalling the USB Adapter 6
Uninstalling Wireless LAN Manager 7
Updating the Wireless LAN USB Adapter Driver 7
A
Technical Support
9
Online Technical Services 9
Support from Your Network Supplier 10
Support from 3Com 10
Returning Products for Repair 10
Regulatory
Compliance Information
11
FCC Part 15 Notice (Applicable to use within the USA) 11
Unintentional Radiator 11
FCC Declaration of Conformity 12
Industry Canada Notice (Applicable for use within Canada) 12
Avis de conformité à la réglementation d’Industrie Canada 12
Industry Canada (IC) Emissions Compliance Statement 12
Avis de conformité à la réglementation d’Industrie Canada 12
Safety Notice 12
European Community Declaration of Conformity 13
Contents
1
1
Installing Your Wireless LAN USB
Adapter and Wireless LAN Manager
Installation CD
The
Installation CD
contains:
Setup programs and drivers for Windows XP, 2000, Millennium Edition (Windows
Me), and 98 Second Edition (SE).
3Com Wireless LAN Manager
README.TXT file with updated information about your Wireless LAN USB Adapter
This
Wireless LAN USB Adapter User Guide
3Com Connection Assistant
Adobe Acrobat Reader
Windows XP, 2000, Me, and 98 SE
If you are accessing this guide as part of your USB Adapter installation, skip to step 3
below.
1
With the computer on and Windows running, insert the
Installation CD
into the
CD-ROM drive. The auto-start feature starts the installation. If nothing happens
within five seconds, click
Start>Run
and type
d:\setup.exe
(where d: is your
CD-ROM drive).
2
From the 3Com Wireless Installer main menu, select
Step 1: Read to Install Hardware.
3
Insert the USB Adapter (see the illustrations in the next section, “Connecting Your
Wireless LAN USB Adapter”).
4
Respond to the prompts as they appear.
If you are prompted for the drivers, enter
d:\
where d: is the location of the CD-ROM
drive where the
Installation CD
is inserted.
5
During the installation process, you may receive prompts for the Windows installation
CD. Insert the CD for your Windows operating system and indicate the correct path.
Your computer goes through a brief installation process during which it displays
several windows indicating what is currently installing.
6
Restart the computer whenever you are prompted.
1
Installing Your Wireless LAN USB Adapter and Wireless LAN Manager
2
Connecting Your Wireless LAN USB Adapter
Connect your Wireless USB Adapter into the USB port on your computer like this:
Antennas
The antenna sits at the side of the Wireless LAN USB Adapter. Extend it, as shown
in the illustration above, for best wireless communications.
Confirming Device Installation
1
With your USB Adapter installed, double-click the
My Computer
icon.
If you are running Windows XP, click
Start
>
Control Panel
and go to step 3.
2
Double-click the
Control Panel
icon.
3
Double-click the
System
icon. The System Properties window appears, detailing your
system setup.
4
Click the
Device Manager
tab. A list of devices appears, arranged by type.
If you are using Windows XP or 2000, click the
Hardware
tab and click
Device Manager
.
5
Double-click
Network Adapters
. One entry appears:
3Com 3CRSHEW696 Wireless
LAN USB Adapter
.
6
Double-click the entry to display a description of the current status.
The device status should indicate “This device is working properly.”
7
Close the windows you have opened until you return to the desktop.
Installing 3Com Wireless LAN Manager
3
Installing 3Com Wireless LAN Manager
1
If you restarted your computer after installing the Wireless LAN USB Adapter and the
install program did not start automatically, click
Start>Run
and type
d:\setup.exe
(where d: is your CD-ROM drive).
2
From the
Installation CD
, select
Step 2: Install Software
and follow the prompts,
removing the
Installation CD
and restarting your computer whenever you
are prompted.
If the 3Com icon was not placed in the system tray when you installed the Wireless LAN
USB Adapter, start the 3Com Launcher by selecting
Start > Programs > 3Com Mobile >
3Com Launcher
.
Using Wireless LAN Manager
Refer to the “Help” instructions for the 3Com Wireless LAN Manager for detailed
information about how to use Wireless LAN Manager.
3Com Connection Assistant
The 3Com Connection Assistant is included on the
Install CD
and is interactive software
that gives you an easy to use diagnostic and repair tool. Using this tool makes
troubleshooting easier and helps you quickly resolve problems. Go to
D:\Install\Connection Assistant\Install.exe (where D: is your CD-ROM drive) to find this
utility.
Using the Connection Assitant you can:
Automatically check your computer and repair problems
Search for solutions for specific hardware or software problems
Find answers to your questions about business processes. tasks, and applications
Connect, via the Internet, to technical support when you need assistance with your
computer hardware and software
Get assistance even if you are not connected to the Internet
Connection Assitant Toolbar
The toolbar at the top of the Connection Assistant Home Page includes these options:
Connection Assistant Home
--Clicking this link will always return you to the Connection
Assistant Home Page.
Assisted Service
--Click this link to send a request for assistance to a technical support
engineer if you need help fixing a Network Interface Card problem.
Options
--Set different security, message, and display options for your Connection
Assistant pages.
Help
--Browse Help information for a variety of topics, links and features related to the
3Com Connection Assistant.
NOTE:
Wireless LAN Manager defaults to automatically connect to any wireless
network and no security. This default allows a basic connection to an access point.
After installation, consult with your network administrator and refer to 3Com’s
Wireless LAN Manager’s online help to change the service set identifier (SSID) and
security settings.
1
Installing Your Wireless LAN USB Adapter and Wireless LAN Manager
4
Connection Assistant Options
The Connection Assistant may also contain the following options:
Diagnose My Network Interface Card--Click this link to get information about your
system, network and network interface card. In addition to providing detailed
information, it also supplies solutions if a problem is detected with your 3Com network
interface card.
List Solutions
--Contains a list of relevant topics for you reference.
Network Settings
--Provides detailed information about your network.
Search
--Locate topics and solutions.
5
2
Troubleshooting
Diagnosing Problems
If you have difficulty using the Wireless LAN USB Adapter, try the solutions in the
following table. If you continue to experience difficulty, see the next two
sections,“Uninstalling the USB Adapter” and “Uninstalling Wireless LAN Manager.”
Wireless LAN USB Adapter LED Indicators
Problem Solutions
Wireless LAN
USB Adapter LED is off Make sure the USB connections are seated firmly on both the computer connection and the
connection to the 3Com USB Wireless Adapter device.
Check the Wireless LAN Adapter icon in the Windows control panel and make sure the adapter
type can be recognized.
Wireless LAN
USB Adapter installs as
an unknown device
Remove the unknown device and repeat the installation procedure. Make sure you insert the
3Com CD when the installation calls for it and that you wait for it to come up to speed in
the drive.
The Windows Add Hardware Wizard was unable to locate the Wireless LAN USB Adapter
drivers. You may have had no CD or the wrong CD inserted in the drive, or the 3Com CD may
not have been ready when the wizard looked for the drivers.
Installation program does not finish
or the driver fails to load
Use the Device Manager to resolve resource conflicts that may exist. Select System from the
Control Panel, and then click the Device Manager tab.
Network association is intermittent Make sure the antenna is extended. Try reorienting the antenna. For best use of the antenna:
Keep the area around the antenna clear from materials that could block radio transmission,
such as metal objects, electronic devices, and cordless telephones.
If the signal is weak, change the direction of the antenna slightly.
If necessary, move the 3Com USB Adapter device to find a better signal.
No network association exists when
the computer becomes active again
after being in sleep mode or after the
Wireless LAN PC Card is removed and
reinserted
Log out and log in again, or restart the computer to restore the connections.
Condition Description
PWR Indicates the Wireless LAN USB Adapter is receiving power.
LNK Indicates data transfer is taking place.
2 Troubleshooting
6
Uninstalling the USB Adapter
Previous installations or interrupted installation attempts sometimes leave problems that
affect operation. Possible problems include:
Wireless LAN USB Adapter fails to function.
Operating system does not detect the Wireless LAN USB Adapter.
System issues a warning tone at start-up.
If the installation is unsuccessful, your best course may be to completely uninstall the
adapter and repeat the installation procedure.
1 Make sure you have exited any networking applications.
2 Make sure the Wireless LAN USB Adapter is attached to your computer.
3 Use the standard operating system procedure to remove the adapter driver.
The procedure for Windows XP, 2000, Windows Me, and Windows 98 SE, is
shown below.
a If you are using Windows 2000, Me, or 98 SE, click Start > Settings >
Control Panel.
If you are using Windows XP, click Start > Control Panel.
b Double-click the System icon.
If you are using Windows XP or 2000, click the Hardware tab.
The System Properties window appears, detailing your system setup.
c Click Device Manager.
A list of devices appears, arranged by type.
d Double-click Network Adapters.
One entry appears: 3Com 3CRSHEW696 Wireless LAN USB Adapter.
e From the Action menu, select Remove.
If you are using Windows XP or 2000, select Uninstall... .
f Click OK.
g Close the open windows until you return to the desktop.
4 Detach the Wireless LAN USB Adapter from your computer.
5 Restart the computer.
CAUTION: Exit any networking applications before uninstalling the adapter.
Uninstalling Wireless LAN Manager
7
Uninstalling Wireless LAN Manager
Normally, you would not uninstall the Wireless LAN Manager software; however, in case a
problem arises, you may want to uninstall and reinstall it.
You can uninstall Wireless LAN Manager any time following the installation. The uninstall
removes desktop icons, registry entry files, and files used by the adapter.
1 If you are using Windows 2000, Me, or 98 SE, click Start > Settings > Control Panel.
If you are using Windows XP, click Start > Control Panel.
2 Click Add/Remove Programs.
3 Select 3Com Wireless LAN Manager.
4 Click Change/Remove.
5 Click Remove.
6 When the uninstall is complete, remove the adapter and restart your computer.
Updating the Wireless LAN USB Adapter Driver
To update your Wireless LAN USB Adapter driver software, find your operating system
below, then follow the procedure.
Windows XP and 2000
1 Insert your Wireless LAN USB Adapter.
2 In Windows 2000, select Start > Settings > Control Panel, then double-click the
System icon.
In Windows XP, from your desktop or start menu, right-click My Computer and
select Properties.
3 Select the Hardware tab and click Device Manager.
4 If necessary, click the plus sign (+) to expand the Network Adapters tree.
5 In Windows 2000, double-click the appropriate entry: 3Com 3CRSHEW696 Wireless
LAN USB Adpater, select the Driver tab, and click Update Driver.
In Windows XP, right-click 3Com Wireless LAN Adapter and select Update Driver.
6 Insert the Installation CD. The Hardware Update Wizard window appears.
7 In Windows 2000, click Display list of known drivers so that I can choose a specific
driver and click Next.
In Windows XP, select Install from a list or specific location (Advanced) and click Next.
8 In Windows XP, select Don’t search. I will choose the driver to install and click Next.
9 When you are prompted to select an adapter, click Have Disk… and enter the drive
letter for the Installation CD or enter the directory on your hard drive where the
updated driver is located. Click Continue.
10 Select 3Com 3CRSHEW696 Wireless LAN USB Adpater, and click Next. Follow the
prompts through the remainder of the driver update.
11 When the installation has completed, click Finish.
2 Troubleshooting
8
Windows Me and 98 SE
1 Insert your Wireless LAN USB Adapter.
2 From the Windows Start menu, select Settings, then select Control Panel.
3 Double-click the System icon, then select Device Manager.
4 In the Device Manager window, expand the Network Adapters list.
5 Select 3Com 3CRSHEW696 Wireless LAN USB Adpater, and click Properties.
6 Select Driver and click Update Driver.
7 In the Update Device Driver Wizard, follow the prompts to install the upgrade.
8 When prompted, click Restart for the changes to take effect.
9
A Technical Support
3Com provides easy access to technical support information through a variety of services.
This appendix describes these services.
Information contained in this appendix is correct at time of publication. For the most
recent information, 3Com recommends that you access the 3Com Corporation World
Wide Web site.
Online Technical Services
3Com offers worldwide product support 24 hours a day, 7 days a week, through the
following online systems:
World Wide Web site
3Com Knowledgebase Web Services
3Com FTP site
World Wide Web Site
To access the latest networking information on the 3Com Corporation World Wide Web
site, enter this URL into your Internet browser:
http://www.3com.com/
This service provides access to online support information, such as technical
documentation and a software library, as well as support options that range from
technical education to maintenance and professional services.
3Com Knowledgebase Web Services
The 3Com Knowledgebase is a database of technical information to help you install,
upgrade, configure, or support 3Com products. The Knowledgebase is updated daily with
technical information discovered by 3Com technical support engineers. This
complimentary service, which is available 24 hours a day, 7 days a week to 3Com
customers and partners, is located on the 3Com Corporation World Wide Web site at:
http://knowledgebase.3com.com
3Com FTP Site
Download drivers, patches, software, and MIBs across the Internet from the 3Com public
FTP site. This service is available 24 hours a day, 7 days a week.
To connect to the 3Com FTP site, enter the following information into your FTP client:
Hostname: ftp.3com.com
Username: anonymous
Password: <your Internet e-mail address>
NOTE: With Web browser software, such as Netscape Navigator and
Internet Explorer, you do not need a user name and password.
A Technical Support
10
Support from Your Network Supplier
If you require additional assistance, consult your network supplier. Many suppliers are
authorized 3Com service partners who are qualified to provide a variety of services,
including network planning, installation, hardware maintenance, application training, and
support services.
When you consult your network supplier, have the following information ready:
Product model name, part number, and serial number
A list of system hardware and software, including revision levels
Diagnostic error messages
Details about recent configuration changes, if applicable
If you are unable to consult your network supplier, see the following section on how to
contact 3Com.
Support from 3Com
If you are unable to obtain assistance from the 3Com online technical resources or from
your network supplier, 3Com offers technical telephone support services. To find out
more about your support options, go to the Web site associated with your region of the
world shown below.
When you contact 3Com for assistance, have the following information ready:
Product model name, part number, and serial number
A list of system hardware and software, including revision levels
Diagnostic error messages
Details about recent configuration changes, if applicable
Returning Products for Repair
Before you send a product directly to 3Com for repair, you must first obtain an
authorization number. Products sent to 3Com without authorization numbers will be
returned to the sender unopened, at the sender’s expense. To obtain an authorization
number, go to the Web site listed above for your region.
Region URL for Regional Web Site
Asia and the Pacific Rim ap.3com.com/contacts/support-contacts.html
Africa, Europe, and the
Middle East
emea.3com.com/support/supportnumbers.html
Latin America lat.3com.com/lat/support/index.html
North America csoweb4.3com.com/contactus/
11
Regulatory
Compliance Information
NOTE: This product contains encryption. It is unlawful to export out of the U.S. without obtaining a U.S.
Export License.
FCC Part 15 Notice (Applicable to use within the USA)
CAUTION: FCC Radio-Frequency Exposure Notice
This device generates and radiates radio-frequency energy. In order to comply with FCC radio-frequency
radiation exposure compliance requirements, a separation distance of at least 2.5 cm (1.0 inch) must be
maintained between the antenna of the device and all persons.
This product does not contain any user serviceable components. Any unauthorized product changes or
modifications will invalidate 3Com’s warranty and all applicable regulatory certifications and approvals.
Unintentional Radiator
WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device as
applicable, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
n Reorient or relocate the receiving antenna.
n Increase the separation between the equipment and receiver.
n Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
n Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1 This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undersired operation.
2 The user may find the following booklet prepared by the Federal Communications Commission helpful:The
Interference Handbook
This booklet is available from the U.S. Government Printing Office, Washington, D.C. 20402. Stock No. 004-
000-00345-4.
Regulatory Compliance Information
12
FCC Declaration of Conformity
3Com Corporation, 3930 W. Parkway Blvd., PO Box 704010, West Valley City, UT 84119, (800) 527-8677
Declares that the Product:
Date: April 11, 2002
Brand Name: 3Com Corporation
Model Number: 3CRSHEW696
Equipment Type: 802.11b Wireless USB Adapter
Complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
1 this device may not cause harmful interference, and
2 this device must accept any interference received, including interference that may cause undesired
operation.
Industry Canada Notice (Applicable for use within Canada)
This device complies with Canadian RSS-210.
To prevent radio interference to the licensed service, this device is intended to be operated indoors and away
from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is
subject to licensing.
The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not
emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable
from Health Canada’s website www.hc-sc.gc.ca/rpb.
Avis de conformité à la réglementation d’Industrie Canada
Cet appareil est conform à la norme CNR-210 du Canada.
Pour empêcher que cet appareil cause du brouillage au service faisant l’objet d’une licence, cet appareil doit être
utilisé à l’intérieur seulement et devrait êtra placé loin des fenêtres afin de fournir un écran de blindage maximal.
L’installateur du présent matériel radio doit s’assurer que l’antenne est située ou pointée de manière à ce que
cette derniére n’émette pas de champs radioélectriques supérieurs aux limites spécifiées par Santé Canada pour
le grand public; condulter le Code de sécurité 6, disponible sur le site Web de Santé Canada, à l’adresse
suivante: www.hc-sc.gc.ca/rpb.
Industry Canada (IC) Emissions Compliance Statement
This Class B digital apparatus complies with Canadian ICES-003.
Avis de conformité à la réglementation d’Industrie Canada
Cet appareil numérique de la classe B est conform à la norme NMB-003 du Canada.
Safety Notice
This device has been tested and certified according to the following safety standards and is intended for use only
in Information Technology Equipment which has been tested to these or other equivalent standards:
UL Standard 60950 (3rd Edition)/ CSA C22.2 No. 60950
IEC 60950
EN 60950
3Com Corporation 3CRSHEW696
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
European Community Declaration of Conformity
13
European Community Declaration of Conformity
Hereby, 3Com Corporation, declares that this Wireless LAN product is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
Due to frequency restrictions, it is necessary to select your country before using this radio device. Refer to your
3Com Wireless LAN Manager online help for details.
3Com Wireless LAN PC Card User Guide version 1.0.0
Published July, 2002
Regulatory Compliance Information
14
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18

3com 3CRSHEW696 Manuel utilisateur

Taper
Manuel utilisateur

dans d''autres langues