Bloomfield Decanter Style 8540D2F Le manuel du propriétaire

Marque: Bloomfield

Modèle: Decanter Style 8540D2F

Catégorie: Cafetières

Taper: Le manuel du propriétaire

Ce manuel convient également à

2060 Cessna Dr, Suite 100

Vacaville, CA 95688

telephone: 707-448-5151

fax: 707-448-1521

www.bloomfieldworldwide.com

p/n 2M-75804 Rev. M

M611 200303

OWNERS MANUAL

For

MODULAR

BREWING SYSTEMS

MODELS

POUR OVER AUTOMATIC AUTOMATIC

UNITS UNITS UNITS

WITH FAUCET

8542 8573 8540

27583458

8571

Includes:

Installation

Use & Care

Servicing Instructions

Model 8572 Brewer

with optional

8900-Series Glass Decanters

611

NOTE: For your protection, please note that equipment in

this shipment was carefully inspected and packaged by skilled

personnel before leaving the factory.

Upon acceptance of this shipment, the transportation

company assumes full responsibility for its safe delivery.

IF SHIPMENT ARRIVES DAMAGED:

1. VISIBLE LOSS OR DAMAGE: Be certain that any

visible loss or damage is noted on the freight bill

or express receipt, and that the note of loss or damage

is signed by the delivery person.

2. FILE CLAIM FOR DAMAGE IMMEDIATELY:

Regardless of the extent of the damage.

3. CONCEALED LOSS OR DAMAGE: if damage is

unnoticed until the merchandise is unpacked, notify the

transportation company or carrier immediately, and

¿OH³&21&($/(''$0$*(´FODLPZLWKWKHP This

PXVWEHGRQHZLWKLQ¿IWHHQGD\VIURPWKHGDWH

the delivery was made to you. Be sure to retain the

container for inspection.

%ORRP¿HOGFDQQRWDVVXPHOLDELOLW\IRUGDPDJHRUORVV

incurred in transit. We will, however, at your request, supply

you with the necessary documents to support your claim.

WARRANTY STATEMENT

SERVICE POLICY AND PROCEDURE GUIDE

ADDITIONAL WARRANTY EXCLUSIONS

yp ,p qp

TE: For

our

rotection

lease note that e

ment in

EALED L

OSS

R DAMA

E: i

dama

e is

SHIPPING DAMAGE CLAIMS PROCEDURE

1. Resetting of safety thermostats, circuit breakers,

overload protectors, or fuse replacements.

2. All problems due to operation at voltages other than

VSHFL¿HGRQHTXLSPHQWQDPHSODWHVFRQYHUVLRQWR

correct voltage must be the customer’s responsibility.

3. All problems due to electrical connections not made in

accordance with electrical code requirements and

wiring diagrams supplied with the equipment.

4. Replacement of items subject to normal wear, to

include such items as knobs and light bulbs. Normal

maintenance functions including adjustment of

thermostats, microswitches, and replacement of fuses

and indicating lights are not covered under warranty.

 All problems due to inadequate water supply, such as

ÀXFWXDWLQJRUKLJKRUORZZDWHUSUHVVXUH

6. All problems due to mineral/calcium deposits, or

FRQWDPLQDWLRQIURPFKORULGHVFKORULQHV'HOLPLQJLV

considered a preventative maintenance function and is

not covered by warranty.

All electrical equipment manufactured by BLOOMFIELD is

warranted against defects in materials and workmanship

for a period of (1 year labor, two year parts) from the date

RIRULJLQDOLQVWDOODWLRQDQGLVIRUWKHEHQH¿WRIWKHRULJLQDO

purchaser, except that:

a. airpots carry a 30 day parts warranty only.

b. dispensers; i.e., tea and coffee carry a 90 days parts

warranty only, excludes decanters.

c. decanters are not covered by this warranty

THE FOREGOING OBLIGATION IS EXPRESSLY GIVEN

IN LIEU OF ANY OTHER WARRANTIES, EXPRESSED

OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE, WHICH ARE HEREBY EXCLUDED.

BLOOMFIELD, LLC SHALL NOT BE LIABLE FOR

INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES

OR LOSSES FROM ANY CAUSE WHATSOEVER.

This warranty is void if it is determined that upon inspection

by an authorized service agency that the equipment has

EHHQPRGL¿HGPLVXVHGPLVDSSOLHGLPSURSHUO\LQVWDOOHGRU

GDPDJHGLQWUDQVLWRUE\¿UHÀRRGRUDFWRI*RG

It also does not apply if the serial nameplate has been

removed or unauthorized service personnel perform service.

7KHSULFHVFKDUJHGE\%ORRP¿HOGIRULWVSURGXFWVDUHEDVHG

upon the limitations in this warranty. Seller’s obligation under

this warranty is limited to the repair of defects without charge

E\D%ORRP¿HOG Authorized Service Agency or one of its

VXEDJHQFLHV This service will be provided on customer’s

SUHPLVHVIRUQRQSRUWDEOHPRGHOV3RUWDEOHPRGHOVDGHYLFH

ZLWKDFRUGDQGSOXJRWDGLVSHQVHUPXVWEHWDNHQRUVKLSSHG

to the closest authorized service agency, transportation

charges prepaid, for services.

In addition to restrictions contained in this warrantyVSHFL¿F

OLPLWDWLRQVDUHVKRZQEHORZ$GGLWLRQDOWDUUDQW\([FOXVLRQV

%ORRP¿HOG Authorized Service Agencies are located in

principal cities.

This warranty is valid in the United States, Canada and void

HOVHZKHUH3OHDVHFRQVXOW\RXUFODVVL¿HGWHOHSKRQHGLUHFWRU\

or your food service equipment dealer; or, for information and

other details concerning warranty, write to:

PARTS TOWN

1200 Greenbriar Dr,

Addison, IL 60101

Phone: (800) 438-8898 Fax: (888) 513-0259

FXVWRPHUVHUYLFH#SDUWVWRZQFRPZZZEORRP¿HOGZRUOGZLGHFRP

7. Full use, care and manuals may or may not be sent with

each unit, only a condensed version. Please visit our

web site to download the full version.

8. TUDYHOPLOHDJHLVOLPLWHGWR¿IW\PLOHVIURPDQ

DXWKRUL]HGVHUYLFHDJHQF\RURQHRILWVVXEVHUYLFH

agencies.

9. All labor shall be performed during normal working hours.

Overtime premium shall be charged to the customer.

10. $OOJHQXLQH%ORRP¿HOGUHSODFHPHQWSDUWVDUHZDUUDQWHG

IRUQLQHW\GD\VIURPGDWHRISXUFKDVHRQQRQ

warranted equipment. Any use of non-genuine

%ORRP¿HOGSDUWVFRPSOHWHO\YRLGVDQ\ZDUUDQWy.

11. Installation, labor and job checkouts are not considered

warranty.

12. Charges incurred by delays, waiting time or operating

restrictions that hinder the service technicians ability

to perform services are not covered by warranty.

This includes institutional and correctional facilities.

2M-75804-611 Koffee-King 8900 Series Brewer

TABLE OF CONTENTS

Thank You for purchasing this

WARRANTY STATEMENT xi

SPECIFICATIONS 1

FEATURES & OPERATING CONTROLS 2

PRECAUTIONS & GENERAL INFORMATION 3

AGENCY APPROVAL INFORMATION 3

INSTALLATION INSTRUCTIONS 4

OPERATION 6

BREWING COFFEE 8

CLEANING INSTRUCTIONS 9

TROUBLESHOOTING SUGGESTIONS 10

SERVICING INSTRUCTIONS 11

EXPLODED VIEWS & PARTS LISTS 18

WIRING DIAGRAMS 22

SPECIFICATIONS

2M-75804-611 Koffee-King 8900 Series Brewer

FEATURES AND OPERATING CONTROLS

Fig. 1 Features & Operating Controls

IL1695

2M-75804-611 Koffee-King 8900 Series Brewer

PRECAUTIONS AND GENERAL INFORMATION

WARNING: ELECTRIC SHOCK HAZARD

$OOVHUYLFLQJUHTXLULQJDFFHVVWRQRQLQVXODWHGFRPSRQHQWVPXVWEHSHUIRUPHGE\TXDOL¿HG

service personnel. Do not open any access panels which require the use of tools. Failure

to heed this warning can result in electrical shock.

WARNING: INJURY HAZARD

$OOLQVWDOODWLRQSURFHGXUHVPXVWEHSHUIRUPHGE\TXDOL¿HGSHUVRQQHOZLWKIXOONQRZOHGJHRI

all applicable electrical and plumbing codes. Failure could result in property damage and

personal injury.

WARNING: ELECTRIC SHOCK HAZARD

Brewer must be properly grounded to prevent possible shock hazard. DO NOT assume a

plumbing line will provide such a ground. Electrical shock will cause death or serious Injury.

WARNING: BURN HAZARD

This appliance dispenses very hot liquid. Serious bodily injury from scalding can occur from

contact with dispensed liquids.

This appliance is intended for commercial use only.

This appliance is intended for use to brew beverage products for

human consumption. No other use is recommended or

authorized by the manufacturer or its agents.

This appliance is intended for use in commercial establishments,

where all operators are familiar with the appliance use,

limitations and associated hazards. Operating instructions and

warnings must be read and understood by all operators and

users.

Except as noted, this piece of equipment is made in the USA

and has American sizes on hardware. All metric conversions are

approximate and can vary in size.

The following trouble shooting, component views and parts lists

are included for general reference, and are intended for use by

TXDOL¿HGVHUYLFHSHUVRQQHO

This manual should be considered a permanent part of this

appliance. The manual must remain with the appliance if it is

sold or moved to another location.

CAUTION:

EQUIPMENT DAMAGE

DO NOT plug in or energize this

appliance until all Installation

Instructions are read and followed.

Damage to the Brewer will occur if

these instructions are not followed.

CAUTION:

BURN HAZARD

Exposed surfaces of the

appliance, brew chamber and

decanter may be HOT to the

touch, and can cause serious

burns.

AGENCY APPROVAL INFORMATION

DO NO

WARNING

2M-75804-611 Koffee-King 8900 Series Brewer

These brewers are listed under ETL 3016449.

This brewer meets

Standard 4 only when installed,

operated and maintained in accordance with

the

enclosed

instructions.

STD 4

INSTALLATION INSTRUCTIONS

READ THIS CAREFULLY BEFORE STARTING THE INSTALLATION

REFER TO EXPLODED VIEWS PAGES 18 thru 22 FOR

COMPONENT NAMES/NUMBERS

Unpack the unit. Inspect all components for completeness and

condition. Ensure that all packing materials have been removed

from the unit.

Verify that the Spray Head Gasket (#33) and Spray Disk (#34)

are properly installed.

LEVELING THE UNIT

Verify that an adjustable leg is installed at each corner of the

brewer.

Set Brewer in its operating location. Level the Brewer. A spirit

level should be placed on the top of the unit, at the edge, as a

guide when making level adjustments.

Level the unit from left to right and front to back by turning the

adjustable feet. Be sure all four feet touch the counter to prevent

tipping.

PLUMBER’S INSTALLATION INSTRUCTIONS

Brewer should be connected to a POTABLE WATER, COLD

WATER line. Flush water line before connecting to Brewer.

DO NOT use a saddle valve with a self-piercing tap for the water

line connection. Such a tap can become restricted by waterline

debris. For systems that must use a saddle tap, shut off the

main water supply and drill a 3/16” (minimum) tap for the saddle

connection, in order to insure an ample water supply. Remember

WRÀXVKWKHOLQHSULRUWRLQVWDOOLQJWKHVDGGOH

The brewer must be installed on a water line with average

pressure between 20 PSI and 90 PSI. If your water pressure

exceeds 90 PSI at anytime, a pressure regulator must be

installed in the water supply line to limit the pressure to not more

than 90 PSI in order to avoid damage to lines and solenoid.

A water shut-off valve should be installed on the incoming water

line in a convenient location (Use a low restriction type valve,

VXFKDVDWXUQEDOOYDOYHWRDYRLGORVVRIZDWHUÀRZWKUXWKH

valve.

The provided water line strainer must be installed in the supply

line, between the shutofIYDOYHDQGLQOHW¿WWLQJ1RWH)/2:

arrow marking on strainer body.

IMPORTANT:

To enable the installer to make

a quality installation and to

minimize installation time, the

following suggestions and tests

should be done before the

actual unit installation is started:

CAUTION:

EQUIPMENT DAMAGE

DO NOT plug in or energize this

appliance until all Installation

Instructions are read and

followed. Damage to the

Brewer will occur if these

instructions are not followed.

CAUTION:

UNSTABLE

EQUIPMENT HAZARD

It is very important for safety

and for proper operation that the

brewer is level and stable when

VWDQGLQJLQLWV¿QDORSHUDWLQJ

position. Provided adjustable,

non-skid legs must be installed

at each corner of the unit.

Failure to do so will result in

movement of the brewer which

can cause personal Injury and/

or damage to brewer.

NOTE: Water supply inlet line

must meet certain minimum

criteria to insure successful

operation of the brewer.

%ORRP¿HOGUHFRPPHQGV´

copper tubing for installation of

less than 25 feet and 3/8” for

more than 25 feet from a 1/2”

water supply line.

DO NO

2M-75804-611 Koffee-King 8900 Series Brewer

INSTALLATION INSTRUCTIONS (continued)

NOTE: This equipment must

be installed to comply with

applicable federal, state and

local plumbing codes and

ordinances.

WARNING:

SHOCK HAZARD

Brewer must be properly

grounded to prevent possible

shock hazard. DO NOT

assume a plumbing line will

provide such a ground.

Electrical shock will cause death

or serious injury.

IMPORTANT: Do not connect

brewer to electrical power until

WKHWDQNLV¿OOHGZLWKZDWHr.

Pour water into the pour-over

RSHQLQJXQWLOZDWHUÀRZVIURP

the brew head.

IMPORTANT:

Supply power must match

nameplate for voltage and

phase. Connecting to the

wrong voltage will damage the

brewer or result in decreased

performance. Such damage is

not covered by warranty.

NSF requires that the brewer be able to be moved for cleaning

underneath. AÀH[OLQHRUORRSVRIFRSSHUWXELQJZLOOVDWLVI\WKLV

requirement. See Figure 2 below.

,QVRPHDUHDVORFDOFRGHVUHTXLUHDEDFNÀRZSUHYHQWHU

FKHFNYDOYHWREHLQVWDOOHGRQWKHLQOHWZDWHUOLQH,IDEDFNÀRZ

preventer is used, you must install a water hammer arrester

LQWKHLQFRPLQJOLQHEHWZHHQWKHEDFNÀRZSUHYHQWHUDQGWKH

brewer inlet, as far away from the brewer as space will allow.

7KLVZLOOUHOLHYHWKHH[FHVVLYHEDFNSUHVVXUHVWKDWFDQFDXVH

faucet leaks and solenoid malfunctions.

ELECTRICIAN’S INSTALLATION INSTRUCTIONS

REFER TO ELECTRICAL SPECIFICATIONS - Page 1

Check the nameplate to determine correct electrical service

required for the Brewer to be installed.

IMPORTANT: Before connecting to electricity, make sure

automatic brewers are connected to the water supply.

All models are equipped with a cord and plug.

They require a 115 - 125 volt 20 amp circuit (50/60 Hz, 2 wire

plus ground, with NEMA 5-15R or 5-20R Receptacle).

IMPORTANT: The ground prong of the plug is part of a system

designed to protect you from electrical shock in the event of

internal damage. Never cut off the ground prong nor twist a

EODGHWR¿WDQH[LVWLQJUHFHSWDFOH&RQWDFWDOLFHQVHGHOHFWULFLDQ

to install the proper circuit and receptacle.

Fig. 2 Water Supply Installation

New-style shown

IL1652

COPPER LOOPS OR

FLEX LINES

(PROVIDED BY

PLUMBER)

SOLENOID

WATER INLET

FITTING

WATER

SUPPLY

SHUT-OFF VALVE

(PROVIDED BY

PLUMBER)

FLOW

STRAINER

WASHER

Brewer mu

WARNING

2M-75804-611 Koffee-King 8900 Series Brewer

OPERATION

Fig. 4 Brewer Operation Diagram

START-UP

For initial start-up, or if the brewer has not been used for an

extended period of time:

• Be sure spray disk and brew gasket are properly installed in the

brew head.

• Be sure the water supply is properly connected and the water

supply valve is turned ON.

• Be sure the WATER TANK IS FILLED

BEFORE plugging the brewer into a receptacle, or otherwise

connecting brewer to electrical power THE WATER TANK MUST

BE FILLED. Place an empty decanter under the brew head. Lift

the pour-over cover then pour warm tap water into the pour-over

RSHQLQJXQWLOZDWHUÀRZVIURPWKHEUHZKHDG:KHQZDWHUVWRSV

dripping from the brew head, empty the container.

Once the tank is full of water, connect the brewer to electrical

power. The heating elements will begin heating the water in the

tank. When the water has reached the proper temperature, the

“READY To BREW” light will glow.

A.IMPORTANT:

Tank must be full of

water before connecting

brewer to electrical power.

Heating elements will be

damaged if allowed to

operate without being fully

submerged in water.

Damage caused by

operating the brewer

without water in the tank

is NOT COVERED BY

WARRANTY.

IL1697

IL1618

2M-75804-611 Koffee-King 8900 Series Brewer

OPERATION (continued)

WATER HEATER

Water temperature is sensed by a

thermobulb inserted into the water tank. This

temperature signal is fed to the thermostat,

which controls line power to the heating

element.

The setpoint temperature is adjustable at the

thermostat.

The element is protected from over-

temperature by a hi-limit thermostat.

WATER FLOW

POUR-OVER FEATURE

Pouring any amount of cold water into the

pour-over opening and into the basin pan

forces an identical amount of hot water out

of the tank and through the spray head into

the brew chamber.

AUTOMATIC OPERATION

Pressing BREW button energizes the

solenoid valve, allowing water from an

H[WHUQDOZDWHUVXSSO\WRÀRZLQWRWKHEDVLQ

pan and then into the hot water tank. This

forces an identical amount of hot water out

of the tank and through the spray head into

the brew chamber

7KHVROHQRLGXVHVDÀRZFRQWUROGHYLFHVR

WKDWÀRZLVFRQVLVWHQWEHWZHHQSVLDQG

SVL

Length of time the solenoid is open is

controlled by the timer.

HOT WATER FAUCET

The faucet water coil is submerged in the

hot water tank and draws heat from the brew

water. Water going to the water coil is not

controlled by the solenoid valve.

The faucet is at supply water pressure any

time the faucet shut-off valve is OPEN.

Fig. 6 Water Flow Diagram

Fig. 5 Heat Control Diagram

IL1654

HI-LIMIT

THERMOSTAT

THERMOBULB

HEATER

ELEMENT

MANUAL

POUR-OVER

MANUAL

POUR-OVER

BASIN

PAN

BASIN

PAN

FAUCET

SHUT-OFF

VALVE

FAUCET

BYPASS

FAUCET

BYPASS

SOLENOID

FAUCET

TANK

WATER

COIL

HOT

WATER

BREW

TANK

THERMOSTAT

2M-75804-611 Koffee-King 8900 Series Brewer

BREWING COFFEE

CAUTION:

BURN HAZARD

Exposed surfaces of the

brewer, brew chamber and

decanter may be HOT to

the touch, and can cause

serious burns.

CAUTION:

BURN HAZARD

To avoid splashing or

RYHUÀRZLQJKRWOLTXLGV

ALWAYS place an empty

decanter under the brew

chamber before starting

the brew cycle. Failure to

comply can cause serious

burns.

CAUTION:

BURN HAZARD

After a brew cycle, brew

chamber contents are

HOT. Remove the brew

chamber and dispose of

used grounds with care.

Failure to comply can

cause serious burns.

NOTE: Water for the hot

water faucet is heated in

a coil inside of the water

tank. Use of the faucet will

not affect the volume of

water delivered for a brew.

However, overuse of the

faucet during a brew may

lower the temperature of

the brew water.

PREPARATION

3ODFHRQHJHQXLQH%ORRP¿HOG

SDSHU¿OWHULQWKHEUHZFKDPEHU.

Add a pre-measured amount of

fresh coffee grounds.

Gently shake the brew chamber to

level the bed of grounds. Slide the

brew chamber into place under the

brew head.

B. POUR-OVER OPERATION

NOTE: Any Integrity™ brewer can be used in the pour-over mode.

BE sure “READY TO BREW” light is lit.

Place the appropriate EMPTY decanter in place under the brew

chamber.

Fill a decanter with tap water. Lift the pour-over cover and pour the

entire contents of the decanter into the pour-over opening, which

ZLOO¿OOWKHEDVLQ

Water from the basin will displace a like amount of heated water

from the tank. The hot water will be forced into the brew head

where it will spray over the bed of grounds. Freshly brewed coffee

ZLOOEHJLQWR¿OOWKHFRQWDLQHUXQGHUWKHEUHZFKDPEHr. When the

ÀRZDQGDOOGULSSLQJVWRSVWKHFRffee is ready to serve.

Discard the contents of the brew chamber. Rinse the brew

chamber in a sink. When the ”READY TO BREW” light glows, the

brewer is ready for another brew cycle.

C. AUTOMATIC OPERATION

BE sure “READY TO BREW” light is lit.

Place an EMPTY decanter in place under the brew chamber.

Press the “BREW” switch. The solenoid will open for an amount of

WLPHGHWHUPLQHGE\WKHWLPHUVHWWLQJDGPLWWLQJDPHDVXUHGTXDQWLW\

of water into the basin.

Water from the basin will displace a like amount of heated water

from the tank. The hot water will be forced into the brew head

where it will spray over the bed of grounds. Freshly brewed coffee

ZLOOEHJLQWR¿OOWKHGHFDQWHUXQGHUWKHEUHZFKDPEHr. When the

cofIHHÀRZDQGDOOGULSSLQJVWRSVWKHFRffee is ready to serve.

Discard the contents of the brew chamber and rinse it in a sink.

When the ”READY TO BREW” light glows, the brewer is ready

for another brew cycle.

IL1605

PAPER

FILTER

BREW

CHAMBER

Fig. 7 Brew Chamber

posed s

Exposed s

o avoid s

After a bre

2M-75804-611 Koffee-King 8900 Series Brewer

CLEANING INSTRUCTIONS

PROCEDURE: Clean Coffee Brewer

PRECAUTIONS: Disconnect brewer from electric power.

Allow brewer to cool.

FREQUENCY: Daily

TOOLS: Mild Detergent, Clean Soft Cloth or Sponge

Bristle Brush.

1. Disconnect brewer from electric power.

Allow brewer to cool before cleaning.

2. Remove and empty decanters.

3. Remove and empty brew chamber.

4. 5HPRYHWKHVSUD\GLVNIURPWKHEUHZKHDG6HH¿JXUH

Press up on the spray disk ears, and then turn the disk to

the left to unlatch. Remove the gasket from inside the brew

head.

5. Wipe inside of brew head and area around the brew head

with a soft clean cloth or sponge moistened with clean water.

6. Wash the spray disk in a sink using warm water and a mild

detergent. A bristle brush may be used to clear clogged

spray holes. Rinse the spray disk with clean water and allow

to air dry.

7. Wash the brew chamber in a sink using warm water and a

mild detergent. A bristle brush may be used to clean the

inside. Rinse with clean water and allow to air dry. For

stainless steel brew chambers, be sure the wire rack is

properly reinstalled.

 Wipe the exterior of the brewer with a soft clean cloth or

sponge moistened with clean water.

10. Reinstall the gasket INSIDE the brew head, and then reinstall

the spray disk.

11. Reinstall the brew chamber.

12. Decanters may be washed in a dishwasher or sink.

Procedure is complete

CAUTION:

BURN HAZARD

Brewing and serving

temperatures of coffee are

extremely hot.

Hot coffee will cause

serious skin burns.

CAUTION:

SHOCK HAZARD

Do not submerge or immerse

brewer in water.

IMPORTANT:

DO NOT use steel wool, sharp

objects, or caustic, abrasive or

chlorinated cleansers to clean

the brewer.

Fig. 8 Cleaning

IL1599

GASKET

SPRAY

DISK

LIFT EARS UP

TURN LEFT TO

REMOVE

Do not sub

Brewing an

2M-75804-611 Koffee-King 8900 Series Brewer

TROUBLESHOOTING SUGGESTIONS

SYMPTOM POSSIBLE CAUSE SUGGESTED REMEDY

Water won’t heat

Brewer unplugged or circuit breaker

tripped

Check power supply cord

Check / reset circuit breaker

Thermostat set too low Set for desired temperature

Hi-Limit thermostat tripped

Allow to cool

Reset hi-limit (8786, 8788)

Damaged internal component or wiring

Examine wiring & connectors, thermostat

and heating element, Repair/replace as

needed

Pourover - no water or too little water

added at startup

%HVXUHWRDGGVXI¿FLHQWZDWHU

Coffee level low (pour-over)

Not enough water poured in Increase water amount

Too much coffee grounds Adjust amount of grounds

Coffee level too high or low

(automatic)

Timer out of adjustment Adjust timer

%UHZFKDPEHURYHUÀRZV

TRRPDQ\¿OWHUSDSHUVRUZURQJ¿OWHU

paper

8VHRQHJHQXLQH%ORRP¿HOG¿OWHUSHU

brew

Brew chamber dispense hole plugged Thoroughly clean brew chamber

Too much cofIHHRUWRR¿QHDJULQG Adjust coffee amount and grind

Sprays water from brew head

Spray gasket improperly installed

Check/reinstall gasket on INSIDE of brew

head

Spray disk plugged Clean spray disk

No brew (automatic)

Water supply OFF Turn water supply ON

Water line strainer plugged Clean strainer (see pg. 14)

WDWHU¿OWHULIXVHGSOXJJHG 5HSODFH¿OWHUHOHPHQW

Bad BREW switch Replace switch

Damaged internal component or wiring

Examine wiring & connectors, brew switch

and solenoid, Repair/replace as needed

1RÀRZIURPKRWZDWHUIDXFHW

Faucet valve turned OFF Turn faucet valve ON

Faucet plugged Disassemble faucet, clean

Poor coffee quality

Water not hot enough Adjust water temp 195-205ºF

Keep brewerDQGGHFDQWHUVFOHDQ,QVWDOODWDVWHDQGRGRU¿OWHULQZDWHUVXSSOy, and

replace cartridges regularly. Use a quality coffee with a consistent roast. Use proper

grind and amount of coffee per brew.

2M-75804-611 Koffee-King 8900 Series Brewer

SERVICING INSTRUCTIONS

ACCESS PANELS

Each warmer plate has a center stud which screws into a

bracket. Warmer plates on Canadian brewers are secured with

a nut. Remove button plug on bottom of brewer to access nut

on warmer plate. Remove warmer plates by turning counter-

clockwise.

Solenoid door is held by two screws and a retaining lip.

Front Panel (In-Line Models) and Top / Rear Panel (3-Station

Models):

a. Remove warmer plate by turning counter-clockwise

until it unscrews.

b. Remove screws from two retaining clips under warmer plate.

c. Lift off panel.

Front Panel (3-Station Models):

a. Remove warmer plates by turning counter-clockwise

until they unscrew.

b. Remove screws from two retaining clips under each

warmer plate.

c. Remove three screws from bottom-side of front lip.

d. Pull bottom of panel forward until it clears

Top Panel (All Models):

a. Remove two screws from rear of top panel.

b. Lift rear of panel, remove to rear.

CAUTION:

SHOCK HAZARD

Opening access panels or

removing warmer plates on this

brew may expose uninsulated

electrical components.

Disconnect brewer from

electrical power before

removing any panel or warmer

plate.

Fig. 9 Access Panels

WARMER

PLATE

TOP / REAR

PANEL

TIMER

ACCESS

BUTTON

PLUG

FRONT

PANEL

SOLENOID

DOOR

WARMER PLATE RETAINER NUT

BUTTON PLUG

TOP PANEL

Opening a

2M-75804-611 Koffee-King 8900 Series Brewer

SERVICING INSTRUCTIONS (continued)

TEMPERATURE ADJUSTMENT

Unplug power cord or turn circuit breaker OFF.

Remove top panel.

Pull vent tube out of tank lid and insert a thermometer of known

accuracy in vent hole. Reconnect brewer to electrical power.

Place an empty decanter under brew chamber. Energize brewer

and pour one decanter (64 oz.) of cold water into

pour-over opening. When READY TO BREW light comes on,

read temperature displayed on thermometer.

Adjust thermostat by turning shaft; clockwise increases

temperature. 1/8 turn = approximately 10ºF.

Refer to Table 1 below for proper brewing temperature based on

altitude.

Upon completion, remove thermometer and reinstall vent tube.

Fig. 10 Checking and Adjusting Brew Temperature

CAUTION:

SHOCK HAZARD

These procedures involve

exposed electrical circuits.

These procedures are to

EHSHUIRUPHGE\TXDOL¿HG

technical personnel only.

NOTE:

Optimum brewing temperature

range is 195ºF to 205ºF (90ºC

to 96ºC).

IMPORTANT:

A mechanical thermostat will

maintain temperature within

±5ºF. To prevent boiling water

in the brewer, thermostat should

be adjusted to a maximum

temperature equal to the local

boiling temperature minus 5ºF.

NOTE: 1/8 turn = approximately

10ºF (5.6ºC).

Table 1 Boiling Temperature by Altitude

Fig. 11 Adjust Thermostat

These pro

IL1601

BOILING

POINT OF

WATER

ELEVATION (feet above sea level)

210

205

200

195

190

MAXIMUM

TEMPERATUR

SETTING

IDEAL

BREWING

TEMPERATUR

TEMP ( F)

IL1602

ELEVATION

(

meters above sea level

)

100

150

300

450

600

750

900

1,050

1,200

1,500

1,650

1,800

1,950

1,350

BOILING

POINT OF

WATER

MAXIMUM

TEMPERATURE

SETTING

IDEAL

BREWING

TEMPERATURE

TEMP ( C)

IL1606

IL1607

DIAL-TYPE

THERMOMETER

IN VENT HOLE

THERMOSTAT

ADJUSTING

SHAFT

TANK LID

ASSEMBLY

2M-75804-611 Koffee-King 8900 Series Brewer

SERVICING INSTRUCTIONS (continued)

IMPORTANT: Water pressure

must be between 20 p.s.i and

SVLÀRZLQJSUHVVXUH,I

water pressure exceeds this

YDOXHRULIZDWHUSUHVVXUH

YDULHVJUHDWOy, a pressure

UHJXODWRUPXVWEHLQVWDOOHGLQ

the water supply line.

IMPORTANT: %HIRUHVHW

WLQJDVVHPEO\LQWRWDQNPDNH

VXUHWDQNOLGJDVNHWLVSURSHUO\

VHDWHGRQÀDQJHRIOLG

DO NOT OVER-TIGHTEN.

IMPORTANT:

,IPRXQWLQJWKHUPRVWDW

SQEHVXUHWRSODFH

DQHZVHDOZDVKHUEHORZWKH

¿WWLQJRQWKHFDSLOODU\OLQH

,IUHSODFLQJJUD\ERGLHGWKHUPR

ZLWKSQEHVXUHWR

UHPRYHWXEHIURPWKHUPRZHOO

TIMER ADJUSTMENT

7KHDPRXQWRIZDWHUGLVSHQVHGDXWRPDWLFDOO\GXULQJDEUHZF\FOH

LVFRQWUROOHGE\WKHWLPHr.

Place empty decanter under brew chamber. Press BREW

EXWWRQ%UHZHUVKRXOGGLVSHQVHRQHGHFDQWHURIZDWHr. TR

DGMXVWDPRXQW

5HPRYHEUHZFKDPEHUDQGEXWWRQSOXJ $GMXVWNQRERQWLPHU

FORFNZLVHLQFUHDVHVWLPH5XQVHYHUDOF\FOHVWRFKHFNDPRXQW

RIZDWHUGHOLYHUHG5HSODFHEXWWRQSOXJ

REMOVE TANK LID ASSEMBLY

8QSOXJEUHZHURUWXUQFLUFXLWEUHDNHUOFF. Turn OFF water

supply5HPRYHWRSSDQHO3XOOYHQWWXEHDQGLQOHWHOERZRXWRI

basin pan.

3XOOZDWHULQOHWWXEHRXWRIEDVLQSDQ5HPRYHEDVLQSDQ

2QPRGHOVZLWKIDXFHWGLVFRQQHFWLQOHWSLSHDWIDXFHWVKXWRII

YDOYHDQGRXWOHWSLSHDWIDXFHW

'LVFRQQHFWDOOZLULQJIURPWKHUPRVWDWKLOLPLWDQGKHDWLQJ

element.

/RRVHQFHQWHUVFUHZRQWDQNKROGGRZQEUDFNHW5HPRYH

KROGGRZQEUDFNHWE\VOLGLQJVKRUWVORWWHGHQGRIIRIORFNLQJVWXG

DQGOLIWLQJLWRII 5HPRYHFRYHUDVVHPEO\E\OLIWLQJLWVWUDLJKWXS

5HDVVHPEOHLQUHYHUVHRUGHr.

REPLACE THERMOSTAT

8QSOXJEUHZHURUWXUQFLUFXLWEUHDNHUOFF. Turn OFF water

supply5HPRYHWRSSDQHO

'LVFRQQHFWDOOZLULQJIURPWKHUPRVWDWRQOy/RRVHQDQGIUHH

MDPQXWIURPSDVVWKUX¿WWLQJVHFXULQJWHPSHUDWXUHVHQVLQJEXOE

5HPRYHWZRVFUHZVKROGLQJWKHUPRVWDWWREUDFNHW

/LIWRXWWKHUPRVWDWVHQVLQJEXOEDQGWKHUPRVWDWJDVNHW

3XVKVHQVLQJEXOELQWRWDQNOLGWKHUPRZHOOXQWLO¿WWLQJVHDWV

TLJKWHQFDSLOODU\ORFNQXWRQO\HQRXJKWRHQVXUHQRZDWHU

OHDNDJH([FHVVLYHWLJKWHQLQJLVQRWQHFHVVDUy.

5HDVVHPEOHLQUHYHUVHRUGHr.

2M-75804-611 Koffee-King 8900 Series Brewer

SERVICING INSTRUCTIONS (continued)

REPLACE HEATING ELEMENT

Remove tank lid assembly as described on page 13.

Remove two hex nuts holding element to cover. Pull element

from mounting holes.

Reassemble in reverse order.

REPLACE SOLENOID

Symptom: $XWRPDWLFEUHZHUZLOOQRWÀRZZDWHURr,

automatic brewer drips continuously from brew head.

NOTE: Wrench p/n 86660 is designed to allow easy removal of

the hoses from the plastic solenoid valve.

IMPORTANT: Shut-off water and electric supply to brewer

before removing hoses or wiring.

5HPRYHZDWHUVXSSO\ÀDUH¿WWLQJ

a. 6OLGHWKH´HQGRIWKHZUHQFKRYHUWKHÀDWVRQWKH

LQOHW¿WWLQJRIWKHYDOYH

b. +ROGWKHZUHQFKWRSUHYHQWWKHLQOHW¿WWLQJIURPWXUQLQJ

ZKLOHLQVWDOOLQJRUUHPRYLQJWKHLQOHWZDWHUVXSSO\ÀDUHQXW

Remove braided hose:

a. Slide the 7/16” end of the wrench between the valve

body and the white ring on the extreme end of the metal

KRVH¿WWLQJ

b. Pressure on the white ring toward the metal ferrule

releases the clinch ring, allowing the hose to be easily

slid off of the solenoid bypass outlet.

c. Install hose on new valve by pressing end of hose onto

bypass outlet until it is fully seated.

Disconnect wiring.

Remove two screws holding solenoid to access door.

Reassemble in reverse order.

CLEAN SOLENOID SCREEN

Symptom: $XWRPDWLFEUHZHUZLOOQRWÀRZZDWHr.

Unplug power cord or turn circuit breaker OFF. Turn OFF and

GLVFRQQHFWZDWHUVXSSO\IURPEUHZHULQOHW¿WWLQJ

8QVFUHZZDWHULQOHW¿WWLQJIURPVROHQRLG

Using needle-nose pliers, withdraw strainer screen from solenoid.

Clean screen under faucet. A stiff bristle brush may be used if

necessary.

Reinsert screen in solenoid. Be careful to maintain correct

orientation. (The OPEN END of the screen goes in FIRST.)

Reassemble in reverse order.

Fig. 12 Clean Strainer Screen

Fig. 11 Remove Faucet

Supply from Solenoid

IMPORTANT: When replacing

heating element, also replace

seal gaskets.

STRAINER

SCREEN

WASHER

WATER INLET

FITTING

IL1608

BYPASS

OUTLET

WHITE

CLINCH

RING

METAL FITTING

SLIDE WRENCH BETWEEN

VALVE AND HOSE FITTING

PRESS CLINCH RING TOWARD

METAL FITTING TO RELEASE

#86660 WRENCH

WRENCH

METAL FITTING

CLINCH RING

IL1699

2M-75804-611 Koffee-King 8900 Series Brewer

SERVICING INSTRUCTIONS (continued)

IMPORTANT: When replacing

water faucet coil, also replace

seal gaskets.

NOTE: Any abrasion or

URXJKQHVVRQWKHÀDWHQGRIWKH

seat cup will require replacing

the seat cup:

Work the seat cup out of the

ERQQHWDQGRfIRIWKHHQGRIWKH

stem.

Install a new seat cup, making

sure the knob on the stem is

IXOO\LQVHUWHGLQWRWKHSRFNHWRI

WKHVHDWFXSDQGWKHVNLUWRIWKH

VHDWFXSLVIXOO\LQVHUWHGLQWRWKH

bonnet.

REPLACE TIMER ASSEMBLY

8QSOXJSRZHUFRUGRUWXUQFLUFXLWEUHDNHU2)).

5HPRYHIURQWSDQHO5HPRYHNQREDQGWKUHHVFUHZVKROGLQJ

timer to bracket. Disconnect wiring to timer.

5HDVVHPEOHLQUHYHUVHRUGHr.

$GMXVWWLPHUDVGHVFULEHGRQSDJH

REPLACE HOT WATER FAUCET COIL

6\PSWRP%UHZHUGULSVFRQWLQXRXVO\IURPEUHZKHDGH[FHSW

ZKHQIDXFHWYDOYHLVWXUQHG2)).

5HPRYHWDQNOLGDVVHPEO\SHUDERYH

5HPRYHWZRKH[QXWVKRWZDWHUFRLOWRFRYHr. Pull coil from

mounting holes.

5HDVVHPEOHLQUHYHUVHRUGHr.

REPAIR HOT WATER FAUCET

5HPRYHWRSSDQHODQGWXUQIDXFHWYDOYH2)).

8QVFUHZDHUDWRUFDSIURPIDXFHWDQGUHPRYHKDQGOHUHWDLQLQJ

FOLS'RQRWOHWIDXFHWERG\WXUQ

3XOOERQQHWDVVHPEO\IURPIDXFHWERGy.

([DPLQHWKHLQWHULRURIWKHIDXFHWERG\DQGWKHVXUIDFHRIWKH

VHDWFXS&OHDQRXWDQ\GHEULVLQWKHIDXFHWERGy, using a stiff

bristle brush if necessary.

([DPLQHWKHDHUDWRr&OHDQDQ\GHEULVIURPWKHVFUHHQRUÀRZ

straightener, using a stiff bristle brush if necessary.

5HDVVHPEOHLQUHYHUVHRUGHr.

REPLACE BREW READY LIGHT or BREW BUTTON

8QSOXJSRZHUFRUGRUWXUQFLUFXLWEUHDNHU2)).

Using Switch Removal TRROSQRUDWKLQVFUHZGULYHr, pry

OLJKWRUVZLWFKIURPPRXQWLQJKROH'LVFRQQHFWOHDGV

5HDVVHPEOHLQUHYHUVHRUGHr.



2M-75804-611 Koffee-King 8900 Series Brewer

CAUTION:

CHEMICAL BURN

HAZARD

Deliming chemicals are caustic.

Wear appropriate protective

gloves and goggles during this

procedure.

Never siphon deliming

chemicals or solutions by

mouth.

This operation should only be

SHUIRUPHGE\TXDOL¿HGDQG

experienced service personnel.

IMPORTANT: DO NOT spill,

splash or pour water or deliming

solution into or over any internal

component other than the inside

of the water tank.

IMPORTANT: DO NOT allow

any internal components to

come into contact with the

deliming solution. Take care to

keep all internal components

dry.

NOTE: Repeat steps 4 thru 5

as required to remove all scale

and lime build-up.

NOTE: Normally, silicone

hoses do not need to be

delimed. Should deliming hoses

become necessary%ORRP¿HOG

recommends replacing the

hoses.

PROCEDURE: Delime the Water Tank

PRECAUTIONS: Disconnect brewer from electric power.

Allow brewer to cool.

FREQUENCY: As required (Brewer slow to heat)

TOOLS: Deliming Solution

Protective Gloves, Goggles & Apron

Mild Detergent, Clean Soft Cloth or Sponge

Bristle Brush, Bottle Brush

Large Sink (or other appropriate work area)

1. Disconnect brewer from the electrical supply. Turn off the water

shut-off valve and disconnect the water supply line from the brewer

LQOHW¿WWLQJ

2. Remove the tank lid assembly as described on page 13.

3. Remove the water tank from the brewer body by lifting straight up.

Empty all water from the tank. Set the tank back into the brewer.

4. Mix 2 quarts of deliming solution according to the manufacturer’s

directions. Carefully pour the deliming solution into the water

tank. Lower the lid assembly back onto the tank. Allow to sit for 30

minutes, or as directed by the manufacturer.

5. At end of soaking period, remove lid assembly from tank.

Thoroughly rinse internal components of lid assembly with clear

water. Using a stiff bristle brush, scrub the heating element (and

faucet water coil on automatic brewers) to remove lime and calcium

build-up. Rinse with clean water. Store lid assembly in a safe

location.

6. Remove the tank from the brewer and empty. Using a stiff bristle

brush, scrub the interior of the water tank to remove lime and

calcium build-up. Rinse with clean water.

7. Set the tank back into the brewer. Reassemble the tank lid to the

water tank. Make sure the gasket is properly in place, and then

reinstall the hold-down strap.

8. Reinstall wiring to heating element and thermostat. Reinstall the

hi-limit thermostat (if removed). For brewers with hot water faucet,

reassemble faucet piping. Verify that all internal components are

dry, then reinstall the top panel.

9. Reconnect brewer to electrical supply and, for automatic brewers,

reconnect water supply.

10. ,QVWDOOWKHEUHZFKDPEHUZLWKRXW¿OWHUSDSHURUJURXQGV5XQDW

least three full brew cycles and discard all water generated.

11. Brewer is ready to use.

CAUTION

PROCEDURE: Delime the

ater

ank

SERVICING INSTRUCTIONS (continued)

Deliming c

Delimin

2M-75804-611 Koffee-King 8900 Series Brewer

Koffee-King™ EXPLODED VIEW & PARTS LIST

CABINET & RELATED COMPONENTS

IL1700

2M-75804-611 Koffee-King 8900 Series Brewer

Koffee-King™ EXPLODED VIEW & PARTS LIST (continued)

2M-75804-611 Koffee-King 8900 Series Brewer

ITEM PART NO. DESCRIPTION USED ON

2D-70090 COVER PLATE, WARMER, BLACK, 1/4-28 STUD ALL, MADE IN USA

2D-Z15630 PLATE COVER WARMER, 1/4-20 STUD ALL, MADE IN CHINA

4 2C-70098 CLIP, PANEL RETAINING ALL

20 2C-70132 NUT, #8SMS, TINNERMAN (not shown) ALL

23 2K-70229 BUSHING, HEYCO ALL

33 2I-70139 GASKET, SPRAY HEAD ALL

34 A6-72727 SPRAY DISK, EMBOSSED ALL

34a A6-70163 RETAINER, SPRAY HEAD (REQUIRES DRILL/RIVETS TO INSTALL) ALL

35 2Q-75089 DOOR, SOLENOID ACCESS, PLASTIC 8540, -72, -73

40 2P-70953 BUTTON PLUG, 1-1/8” DIA, METAL (WARMER PLATE RETAINER) ALL (Canadian)

41 18-50 NUT, WARMER PLATE RETAINING, 1/4-28 ALL (Canadian)

47 2P-70272 BUTTON PLUG, 1/2” DIA, PLASTIC (NON FAUCET MODELS) 8542, -43, -71, -73

48 2A-71732 ASSEMBLY, ADJUSTABLE LEG ALL

70 2P-70053 BUTTON PLUG, 2” DIA, METAL (TIMER) 8540, -71, -72, -73

101 A6-70231 ASSEMBLY, BASIN TOP ALL

102

WS-8512-56 BASIN COVER W/WARMER MOUNT 8540, 8543

WS-8542-6 BASIN COVER, W/O WARMER MOUNT 8542, -71, -72, -73

103 2F-76666 ASSEMBLY, POUR-OVER PLASTIC ALL

108

2D-70095 BASIN PAN (AUTOMATIC) 8540, -72, -73

2D-70226 BASIN PAN (POUR-OVER) 8542, 8543, 8571

110

2M-71135 LABEL, CONTROL PANEL DECAL (IN-LINE POUR-OVER 1W) 8542

2M-70252 LABEL, CONTROL PANEL DECAL (IN-LINE POUR-OVER 2W) 8543

2M-70289 LABEL, CONTROL PANEL DECAL (IN-LINE AUTOMATIC 2W) 8540

2M-70279 LABEL, CONTROL PANEL DECAL (STEP-UP AUTOMATIC 3W) 8572, 8573

2M-70264 LABEL, CONTROL PANEL DECAL (STEP-UP POUR-OVER 3W) 8571

111

B7-70249 ASSEMBLY, BREWER BASE (IN-LINE POUR-OVER) 8542, 8543

DD-8540-25 ASSEMBLY, BREWER BASE (IN-LINE AUTOMATIC) 8540

67-70263 ASSEMBLY, BREWER BASE (STEP-UP POUR-OVER) 8571

DD-8572-33 ASSEMBLY, BREWER BASE (STEP-UP AUTOMATIC) 8572, 8573

NONE ASSEMBLY, BREWER BASE (STEP-UP AUTOMATIC)

112

A6-70288 PANEL, FRONT (IN-LINE AUTOMATIC) 8540

A6-70227 PANEL, FRONT (IN-LINE POUR-OVER) 8542, 8543

B7-70265 PANEL, FRONT (STEP-UP POUR-OVER) 8571

A6-8572-10 PANEL, FRONT (STEP-UP AUTOMATIC) 8572, 8573

114

A6-70256 PLATE BOT 1-2 WRMR S/SA

8430, 8540, 8718, 8730, 8738,

8783

A6-71550 PLATE BOT SUB ASSY AIRPOT 8773, 8774

A6-70269 PLATE BOT 3-WRMR SUB ASSY 8571, 8572, 8573

115 A6-70267 PANEL, COVER W/WARMER MOUNT 8571, 8572, 8573

200

2D-70234 BREW CHAMBER, BLACK PLASTIC

ALLWS-8942-6 BREW CHAMBER, BROWN PLASTIC (OPTIONAL limited to stock on hand)

2D-70114 BREW CHAMBER, STAINLESS W/ WIRE BASKET (OPTIONAL)

201 WS-POF FILTER PAPER, COFFEE (CASE OF 1000) ALL

La page charge ...

Bloomfield Decanter Style 8540D2F Le manuel du propriétaire

Marque: Bloomfield

Modèle: Decanter Style 8540D2F

Catégorie: Cafetières

Taper: Le manuel du propriétaire

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: Bloomfield Decanter Style 8540D2F Owner's manual

Bloomfield Decanter Style 8540D2F Le manuel du propriétaire

Ce manuel convient également à

Bloomfield Decanter Style 8540D2F Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents