Sony cdx l550x Le manuel du propriétaire

Catégorie
Récepteurs multimédia de voiture
Taper
Le manuel du propriétaire
Operating Instructions
Bedienungsanleitung
Mode d’emploi
Istruzioni per l’uso
Gebruiksaanwijzing
Wichtig!
Bitte nehmen Sie sich etwas Zeit, um den Geräte-Pass vollständig
auszufüllen. Wo sich dieser befindet, entnehmen Sie bitte dem in der
hinteren Umshlagseite dieser Bedienungsanleitung.
Si dichiara che l’apparecchio è stato fabbricato in conformità all’art. 2, Comma 1 del D.M. 28.08.
1995 n. 548.
FM/MW/LW Compact Disc Player
GB
CDX-L550X CDX-L550V
CDX-L550
For installation and connections, see the supplied installation/connections manual.
Zur Installation und zum Anschluß siehe die mitgelieferte Installations-/Anschlußanleitung.
En ce qui concerne l’installation et les connexions, consulter le manuel d’installation/
raccordement fourni.
Per l’installazione e i collegamenti, fare riferimento al manuale di istruzioni per
l’installazione e i collegamenti in dotazione.
Zie voor het monteren en aansluiten van het apparaat de bijgeleverde handleiding “Installatie
en aansluitingen”.
© 2001 Sony Corporation
3-227-661-12 (1)
DE
FR
IT
NL
FM
/
MW
/
LW
Compact Disc Player
2
Welcome!
Thank you for purchasing this Sony Compact
Disc Player. You can enjoy its various features
even more with:
CD TEXT information (displayed when a CD
TEXT disc*
is played).
Optional controller accessories
Rotary commander RM-X4S
* A CD TEXT disc is an audio CD that includes
information such as the disc name, artist name, and
track names. This information is recorded on the
disc.
3
Table of Contents
Location of controls . . . . . . . . . . . . . . . . . . . 4
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Notes on discs . . . . . . . . . . . . . . . . . . . . . . . . 6
Getting Started
Resetting the unit. . . . . . . . . . . . . . . . . . . . . . 7
Detaching the front panel . . . . . . . . . . . . . . . 7
Setting the clock . . . . . . . . . . . . . . . . . . . . . . 8
CD Player
Playing a disc. . . . . . . . . . . . . . . . . . . . . . . . . 9
Display items. . . . . . . . . . . . . . . . . . . . . . . . . 9
Playing tracks repeatedly
Repeat Play . . . . . . . . . . . . . . . . . . . . 10
Playing tracks in random order
Shuffle Play . . . . . . . . . . . . . . . . . . . . 10
Radio
Storing stations automatically
Best Tuning Memory (BTM). . . . . . . 10
Receiving the stored stations. . . . . . . . . . . . 11
Storing only the desired stations . . . . . . . . . 11
RDS
Overview of RDS . . . . . . . . . . . . . . . . . . . . 12
Automatic retuning for best reception results
AF function . . . . . . . . . . . . . . . . . . . . 13
Receiving traffic announcements
TA/TP . . . . . . . . . . . . . . . . . . . . . . . . 14
Presetting RDS stations with AF and TA
setting. . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Tuning in stations by programme type
PTY . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Setting the clock automatically
CT . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Other Functions
Using the rotary commander. . . . . . . . . . . . 16
Adjusting the sound characteristics . . . . . . 18
Quickly attenuating the sound . . . . . . . . . . 18
Changing the sound and display settings
Menu . . . . . . . . . . . . . . . . . . . . . . . . . 18
Selecting the sound position
My Best sound Position (MBP) . . . . 19
Setting the equalizer . . . . . . . . . . . . . . . . . . 20
Additional Information
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . 21
Removing the unit. . . . . . . . . . . . . . . . . . . . 21
Specifications . . . . . . . . . . . . . . . . . . . . . . . 22
Troubleshooting . . . . . . . . . . . . . . . . . . . . . 23
Error displays/Messages. . . . . . . . . . . . . . . 24
4
Location of controls
Refer to the pages listed for details.
: During Playback : During radio reception : During menu mode
a Volume control dial 14
b MBP button 19
c Z (eject) button (located on the front side
of the unit, behind the front panel) 9
d SOURCE (Power on/Radio/CD) button
8, 9, 10, 11, 14, 20
e Display window
f MENU button 8, 10, 14, 16, 19, 20
g S (SCROLL) button 9
h OPEN button 7, 9
i PTY (DSPL) (programme type/display
mode change) button
9
12, 15
j EQ7 button 20
k RESET button (located on the front side of
the unit, behind the front panel) 7
l Number buttons
(3) REP 10
(6) SHUF 10
10, 11, 13, 14
m MODE button
10, 11, 14
n SOUND button 18, 19
o AF button 13, 14
p TA button 14
q OFF (Stop/Power off) button* 7, 9
r ENTER button
12
8, 10, 14, 15, 16, 19, 20
* Warning when installing in a car without
an ACC (accessory) position on the
ignition switch
After turning off the ignition, be sure to press
(OFF) on the unit for 2 seconds to turn off the
clock display.
Otherwise, the clock display does not turn off
and this causes battery drain.
CD
RADIO MENU
CDX-L550X/L550V/L550
1
2
3
4
5
6
AF
TA
O
F
F
MENU
PTY
SOUND
ENTER
MBP
SOURCE
REP
SHUF
MODE
EQ 7
P
R
E
S
E
T
SEEK
DSPL
SEEK
O
P
E
N
S
SCROLL
CD
RADIO
CD
RADIO
RADIO
RADIO
MENU
5
s PRESET buttons (+/)
11, 12, 15
8, 10, 14, 16, 19, 20
t SEEK buttons (/+)
9
11, 13
8, 16, 18, 19, 20
Precautions
If your car was parked in direct sunlight, allow
the unit to cool off before operating it.
Power aerials will extend automatically while
the unit is operating.
If you have any questions or problems
concerning your unit that are not covered in this
manual, please consult your nearest Sony dealer.
Moisture condensation
On a rainy day or in a very damp area, moisture
condensation may occur inside the lenses and
display of the unit. Should this occur, the unit
will not operate properly. In such a case, remove
the disc and wait for about an hour until the
moisture has evaporated.
To maintain high sound quality
Be careful not to splash juice or other soft drinks
onto the unit or discs.
AF
TA
O
FF
S
MENU
PTY
SOUND
ENTER
P
R
E
S
E
T
SEEKSEEK
O
P
E
N
DSPL
SCROLL
(SEEK)
(): to select
leftwards/
.
(SEEK)
(+): to select
rightwards/
>
(PRESET)
(+): to select upwards
In menu mode, the currently selectable button (s)
of these four are indicated with aM” in the display.
(PRESET)
(): to select downwards
RADIO
MENU
CD
RADIO
MENU
6
Notes on discs
To keep the disc clean, do not touch the surface.
Handle the disc by its edge.
Keep your discs in their cases or disc
magazines when not in use.
Do not subject the discs to heat/high
temperature. Avoid leaving them in parked cars
or on dashboards/rear trays.
Do not attach labels, or use discs with sticky
ink/residue. Such discs may stop spinning
when used, causing a malfunction, or may ruin
the disc.
Discs with non-standard shapes (e.g., heart,
square, star) cannot be played on this unit.
Attempting to do so may damage the unit. Do
not use such discs.
You cannot play 8cm CDs.
Before playing, clean the discs with a
commercially available cleaning cloth. Wipe
each disc from the centre out. Do not use
solvents such as benzine, thinner, commercially
available cleaners, or antistatic spray intended
for analog discs.
Notes on CD-R/CD-RW discs
You can play CD-Rs (recordable CDs)
designed for audio use on this unit.
Look for this mark to distinguish CD-Rs for
audio use.
This mark denotes that a disc is not for audio
use.
Some CD-Rs (depending on the equipment
used for its recording or the condition of the
disc) may not play on this unit.
You cannot play a CD-R that is not finalized*.
* A process necessary for a recorded CD-R disc to
be played on the audio CD player.
You cannot play CD-RWs (rewritable CDs) on
this unit.
7
Getting Started
Resetting the unit
Before operating the unit for the first time or
after replacing the car battery, you must reset the
unit.
Remove the front panel and press the RESET
button with a pointed object, such as a ballpoint
pen.
Note
Pressing the RESET button will erase the clock setting
and some stored contents.
Detaching the front panel
You can detach the front panel of this unit to
protect the unit from being stolen.
Caution alarm
If you turn the ignition switch to the OFF
position without removing the front panel, the
caution alarm will beep for a few seconds.
If you connect an optional amplifier and do not
use the built-in amplifier, the beep sound will be
deactivated.
1 Press (OFF)*.
CD playback or radio reception stops (the key
illumination and display remain on).
* If your car has no ACC position on the ignition
switch, be sure to turn the unit off by pressing
(OFF) for 2 seconds to avoid car battery drain.
2 Press (OPEN), then slide the front panel
to the right, and gently pull out the left
end of the front panel.
Notes
If you detach the panel while the unit is still turned
on, the power will turn off automatically to prevent
the speakers from being damaged.
Do not drop or put excessive pressure on the front
panel and its display window.
Do not subject the front panel to heat/high
temperature or moisture. Avoid leaving it in parked
cars or on dashboards/rear trays.
Tip
When carrying the front panel with you, use the
supplied front panel case.
continue to next page t
RESET button
1
2
8
Attaching the front panel
Place hole A of the front panel onto the spindle
B on the unit, then lightly push the left side in.
Press (SOURCE) (or insert a CD) to operate the
unit.
Note
Do not put anything on the inner surface of the front
panel.
Setting the clock
The clock uses a 24-hour digital indication.
Example: To set the clock to 10:08
1 Press (MENU), then press either side of
(PRESET) repeatedly until CLOCK
appears.
1 Press (ENTER).
The hour indication flashes.
2 Press either side of (PRESET) to set
the hour.
3 Press the (+) side of (SEEK).
The minute indication flashes.
4 Press either side of (PRESET) to set
the minute.
2 Press (ENTER).
The clock starts. After the clock setting is
completed, the display returns to normal play
mode.
Tips
You can set the clock automatically with the RDS
feature (page 16).
When D.INFO mode is set to ON, the time is always
displayed (page 18).
A
B
x
9
CD Player
Playing a disc
1 Press (OPEN) and insert the disc
(labelled side up).
2 Close the front panel.
Playback starts automatically.
If a disc is already inserted, press (SOURCE)
repeatedly until CD appears to start playback.
Note
When the last track on the disc is over, playback
restarts from the first track of the disc.
Display items
When the disc/track changes, any prerecorded
title* of the new disc/track is automatically
displayed (if the Auto Scroll function is set to
ON, names exceeding 8 characters will be
scrolled (page 18)).
* Only for CD TEXT discs with the artist name.
Notes
Some characters cannot be displayed.
For some CD TEXT discs with very many
characters, information may not scroll.
This unit cannot display the artist name for each
track of a CD TEXT disc.
Tip
When Auto scroll is set to OFF and the disc/track
name is changed, the disc/track name does not scroll.
To Press
Stop playback (OFF)
Eject the disc (OPEN) then Z
Skip tracks
Automatic
Music Sensor
(SEEK) (./>)
[once for each track]
Fast-forward/
reverse
Manual Search
(SEEK) (m/M)
[hold to desired point]
To Press
Switch display
item
(PTY/DSPL)
Scroll display item (SCROLL)
Displayable items
Music source
Clock
Function
Displayable items
Elapsed playback time
Disc name/artist name*
Track title*
10
Playing tracks repeatedly
— Repeat Play
The current track will repeat itself when it
reaches the end.
During playback, press (3) (REP) until
REP-ON appears in the display.
Repeat Play starts.
To return to normal play mode, select REP-
OFF.
Playing tracks in random
order
— Shuffle Play
You can select to play the tracks on the current
disc in random order.
During playback, press (6) (SHUF)
repeatedly until SHUF-ON appears in
the display.
Shuffle Play starts.
To return to normal play mode, select SHUF-
OFF.
Radio
The unit can store up to 6 stations per band
(FM1, FM2, FM3, MW, and LW).
Caution
When tuning in stations while driving, use Best
Tuning Memory to prevent accidents.
Storing stations
automatically
— Best Tuning Memory (BTM)
The unit selects the stations with the strongest
signals within the selected band, and stores them
in the order of their frequency.
1 Press (SOURCE) repeatedly to select the
radio.
2 Press (MODE) repeatedly to select the
band.
3 Press (MENU), then press either side of
(PRESET) repeatedly until BTM
appears.
4 Press (ENTER).
A beep sounds when the setting is stored.
Notes
If only a few stations can be received due to weak
signals, some number buttons will retain their former
settings.
When a number is indicated in the display, the unit
starts storing stations from the one currently
displayed.
11
Receiving the stored stations
1 Press (SOURCE) repeatedly to select the
radio.
2 Press (MODE) repeatedly to select the
band.
3 Press the number button ((1) to (6)) on
which the desired station is stored.
Tip
Press either side of (PRESET) to receive the stations
in the order they are stored in the memory (Preset
Search function).
If preset tuning does not work
Press either side of (SEEK) to search for
the station (automatic tuning).
Scanning stops when the unit receives a
station. Repeat until the desired station is
received.
Tips
If automatic tuning stops too frequently, turn on the
Local Seek to limit seek to stations with stronger
signals (page 19).
If you know the frequency of the station you want to
listen to, press and hold either side of (SEEK) to
locate the approximate frequency, then press
(SEEK) repeatedly to fine adjust to the desired
frequency (manual tuning).
If FM stereo reception is poor
Select monaural reception mode (page
19).
The sound improves, but becomes monaural
(ST disappears).
Storing only the desired
stations
You can manually preset the desired stations on
any chosen number button.
1 Press (SOURCE) repeatedly to select the
radio.
2 Press (MODE) repeatedly to select the
band.
3 Press either side of (SEEK) to tune in the
station that you want to store.
4 Press the desired number button ((1) to
(6)) for 2 seconds until MEM appears.
The number button indication appears in the
display.
Note
If you try to store another station on the same number
button, the previously stored station will be erased.
12
RDS
Overview of RDS
FM stations with Radio Data System (RDS)
service send inaudible digital information along
with the regular radio programme signal. For
example, one of the following will be displayed
upon receiving a station with RDS capability.
RDS services
RDS data offers you other conveniences, such as:
Automatic retuning of a programme, helpful
during long-distance drives. AF t page 13
Receiving traffic announcements, even
when enjoying another programme/source.
TA t page 14
Selecting stations by the type of programme
it broadcasts. PTY t page 15
Automatic clock time setting. CT t page
16
Notes
Depending on the country or region, not all of the
RDS functions are available.
RDS may not work properly if the signal strength is
weak or if the station you are tuned to is not
transmitting RDS data.
To Press
Switch display
item
(PTY/DSPL)
Displayable items
Music source
Clock
Function
Displayable items
Station name (frequency)
Programme type
13
Automatic retuning for best
reception results
AF function
The alternative frequencies (AF) function allows
the radio to always tune into the areas strongest
signal for the station you are listening to.
1 Select an FM station (page 11).
2 Press (AF) repeatedly until AF-ON
appears.
The unit starts searching for an alternative
frequency with a stronger signal in the same
network.
If NO AF flashes, the currently tuned into
station does not have an alternative frequency.
Note
When there is no alternative frequency in the area or
when you do not need to search for one, turn the AF
function off by selecting AF-OFF.
For stations without alternative
frequencies
Press either side of (SEEK) while the
station name is flashing (within 8
seconds).
The unit starts searching for another
frequency with the same PI (Programme
Identification) data (PI SEEK appears).
If the unit cannot find the same PI, the unit
returns to the previously selected frequency.
Staying with one regional programme
When AF function is on: this units factory-set
setting restricts reception to a specific region, so
you wont be switched to another regional station
with a stronger frequency.
If you leave this regional programmes reception
area or would like to take advantage of the whole
AF function, select REG-OFF from the MENU
(page 19).
Note
This function does not work in the United Kingdom
and in some other areas.
Local Link function
(United Kingdom only)
This function enables you to select other local
stations in the area, even if they are not stored on
your number buttons.
1 Press a number button ((1) to (6)) that
has a local station stored on it.
2 Within 5 seconds, press the number
button of the local station again.
3 Repeat this procedure until the desired
local station is received.
Frequencies change automatically.
98.5 MHz
Station
102.5 MHz
96.0 MHz
14
Receiving traffic
announcements
TA/TP
By activating the Traffic Announcement (TA)
and Traffic Programme (TP), you can
automatically tune in an FM station broadcasting
traffic announcements. These settings function
regardless of the current FM programme/source,
CD; the unit switches back to the original source
when the bulletin is over.
Press (TA) repeatedly until TA-ON
appears.
The unit starts searching for traffic
information stations.
TP indicates reception of such stations, and
TA flashes during an actual traffic
announcement. The unit will continue
searching for stations available with TP if
NO TP is indicated.
To cancel all traffic announcements, select TA -
OFF.
Tip
You can also cancel the current announcement by
pressing (SOURCE) or (MODE).
Presetting the volume of traffic
announcements
You can preset the volume level of the traffic
announcements so you wont miss hearing them.
1 Turn the volume control dial to adjust
the desired volume level.
2 Press (TA) for 2 seconds.
TA appears and the setting is stored.
Receiving emergency announcements
If either AF or TA is on, the unit will switch to
emergency announcements, if one comes in
while listening to an FM station or CD.
Presetting RDS stations with
AF and TA setting
When you preset RDS stations, the unit stores
each stations AF/TA setting (on/off) as well as
its frequency. You can select a different setting
(for AF, TA, or both) for individual preset
stations, or the same setting for all preset
stations. If you preset stations with AF-ON the
unit automatically stores stations with the
strongest radio signal.
Presetting the same setting for all preset
stations
1 Select an FM band (page 10).
2 Press (AF) and/or (TA) to select AF-
ON and/or TA-ON.
Note that selecting AF-OFF or TA -OFF
stores not only RDS stations, but also non-
RDS stations.
3 Press (MENU), then press either side of
(PRESET) repeatedly until BTM
appears.
4 Press (ENTER) until BTM flashes.
Presetting different settings for each
preset station
1 Select an FM band, and tune in the
desired station (page 11).
2 Press (AF) and/or (TA) to select AF-
ON and/or TA-ON.
3 Press the desired number button ((1) to
(6)) until MEM appears.
Repeat from step 1 to preset other stations.
To Press
Cancel current
announcement
(TA)
15
Tuning in stations by
programme type
PTY
You can tune in a station by selecting the type of
programme you would like to listen to.
Note
You cannot use this function in some countries where
no PTY (Programme Type selection) data is available.
1 Press (PTY/DSPL) during FM reception
until PTY appears.
The current programme type name appears if
the station is transmitting the PTY data.
-------- appears if the received station is not
an RDS station, or if the RDS data is not
received.
2 Press (PRESET) repeatedly until the
desired programme type appears.
The programme types appear in the order
shown in the table.
-------- appears if the programme type is not
specified in the RDS data.
3 Press (ENTER).
The unit starts searching for a station
broadcasting the selected programme type.
Programme types Display
News NEWS
Current Affairs AFFAIRS
Information INFO
Sports SPORT
Education EDUCATE
Drama DRAMA
Culture CULTURE
Science SCIENCE
Va ri ed VAR IE D
Popular Music POP M
Rock Music ROCK M
Easy Listening EASY M
Light Classical LIGHT M
Classical CLASSICS
Other Music Type OTHER M
Weather WEATHER
Finance FINANCE
Childrens Programmes CHILDREN
Social Affairs SOCIAL A
Religion RELIGION
Phone In PHONE IN
Travel TRAVEL
Leisure LEISURE
Jazz Music JAZZ
Country Music COUNTRY
National Music NATION M
Oldies Music OLDIES
Folk Music FOLK M
Documentary DOCUMENT
16
Setting the clock
automatically
CT
The CT (Clock Time) data from the RDS
transmission sets the clock automatically.
1 During radio reception, press (MENU),
then press either side of (PRESET)
repeatedly until CT-OFF appears.
2 Press the (+) side of (SEEK) repeatedly
until CT-ON appears.
The clock is set.
3 Press (ENTER) to return to the normal
display.
To cancel the CT function, select CT-OFF in
step 2.
Notes
The CT function may not work even though an RDS
station is being received.
There might be a difference between the time set by
the CT function and the actual time.
Other Functions
You can also control the unit with a rotary
commander (optional).
Using the rotary commander
First, attach the appropriate label depending on
how you want to mount the rotary commander.
The rotary commander works by pressing
buttons and/or rotating controls.
By pressing buttons
* If your car has no ACC (accessory) position on the
ignition key switch, be sure to press (OFF) for 2
seconds to turn off the clock indication after turning
off the ignition.
Press To
(SOURCE)
Change source
(radio/CD)
(MODE)
Change
(radio band)
(ATT) Attenuate sound
(OFF)*
Stop playback or radio
reception
(SOUND) Adjust the sound menu
(DSPL) Change the display item
SOUND
DSPL
MODE
SOUND
DSPL
MODE
OFF
Rotate the VOL control
to adjust the volume.
(SOURCE)
(SOUND)
(ATT)
(DSPL)
(OFF)
(MODE)
17
By rotating the control
Rotate and release to:
Skip tracks.
Tune in stations automatically.
Rotate, hold, and release to:
Fast-forward/reverse a track.
Find a station manually.
By pushing in and rotating the control
Push in and rotate the control to:
Receive preset stations.
Changing the operative direction
The operative direction of controls is factory-set
as shown below.
If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.
Press (SOUND) for 2 seconds while
pushing the VOL control.
Tip
You can also change the operative direction of these
controls with the unit (page 18).
SEEK/AMS
control
PRESET
To increase
To decrease
18
Adjusting the sound
characteristics
You can adjust the bass, treble, balance, and
fader.
The bass and treble levels can be stored
independently for each source.
1 Select the item you want to adjust by
pressing (SOUND) repeatedly.
Each time you press (SOUND), the item
changes as follows:
BAS (bass) t TRE (treble) t BAL (left-
right)
t FAD (front-rear)
2 Adjust the selected item by pressing
either side of (SEEK).
When adjusting with the rotary commander,
press (SOUND) and rotate the VOL control.
Note
Adjust within 3 seconds after selecting the item.
Quickly attenuating the
sound
(With the rotary commander)
Press (ATT) on the rotary commander.
After AT T- ON momentarily appears, the
ATT appears in the display.
To restore the previous volume level, press
(ATT) again.
Tip
When the interface cable of a car telephone is
connected to the ATT lead, the unit decreases the
volume automatically when a telephone call comes in
(Telephone ATT function).
Changing the sound and
display settings
Menu
The following items can be set:
SET (Set Up)
CLOCK (page 8)
CT (Clock Time) (page 16)
BEEP to turn the beeps on or off.
RM (Rotary Commander) to change the
operative direction of the controls of the rotary
commander.
Select NORM to use the rotary commander
as the factory-set position.
Select REV when you mount the rotary
commander on the right side of the steering
column.
DSPL (Display)
D.INFO (Dual Information) to display the
clock and the play mode at the same time (on).
AMBER/GREEN to change the
illumination colour to amber or green (CDX-
L550 only)
DIM (Dimmer) to change the brightness of
the display (CDX-L550V only).
Select ON to dim the display.
Select OFF to deactivate the Dimmer.
M.DSPL (Motion Display) to select the
Motion Display mode from 1, 2, and
OFF.
Select 1 to show decoration lines in the
display and activate Demo display.
Select 2 to show decoration lines in the
display and deactivate Demo display.
Select OFF to deactivate the Motion
Display.
A.SCRL (Auto Scroll)
Select ON to scroll all automatically
displayed names exceeding 8 characters.
When Auto scroll is set to off and the disc/
track name is changed, the disc/track name
does not scroll.
SND (Sound)
LOUD (Loudness) to enjoy bass and treble
even at low volumes. The bass and treble will
be reinforced.
19
P/M (Play Mode)
LOCAL-ON/OFF (Local seek mode) (page 11)
Select ON to only tune into stations with
stronger signals.
MONO-ON/OFF (Monaural mode) (page 11)
Select ON to hear FM stereo broadcast in
monaural. Select OFF to return to normal
mode.
REG-ON/OFF (Regional) (page 13)
1 Press (MENU).
To set A.SCRL, press (MENU) during CD
Playback.
2 Press either side of (PRESET)
repeatedly until the desired item
appears.
3 Press the (+) side of (SEEK) to select
the desired setting (Example: ON or
OFF).
4 Press (ENTER).
After the mode setting is completed, the
display returns to normal play mode.
Note
The displayed item will differ depending on the source.
Tip
You can easily switch among categories (SET,
DSPL, SND, and P/M) by pressing either side of
(PRESET) for 2 seconds.
Selecting the sound position
My Best sound Position (MBP)
When you drive without passengers, you can
enjoy the most comfortable sound environment
with My Best sound Position.
My Best sound Position has two presets, which
adjust the sound level of balance and fader. You
can select one very easily with the MBP button.
Press (M BP) repeatedly for the desired
listening position.
The mode of My Best sound Position is
shown in the display in order of the table.
After one second, the display goes back to the
normal playback mode.
If you want to adjust the sound level of
balance and fader more precisely, you can do
it using the (SOUND) button (page 18).
Notes
When the BAL (balance) or FAD (fader) in Adjusting
the sound characteristics (page 18) is adjusted, the
MBP setting returns OFF.
When MBP in set to OFF, the BAL and FAD setting
is activated.
Display
window
Balance Level Fader Level
Right Left Front Rear
MBP-A
4 dB 0 0 4 dB
MBP-B 0 4 dB 0 4 dB
MBP-OFF
0000
20
Setting the equalizer
You can select an equalizer curve for seven
music types (VOCAL, CLUB, JAZZ, NEW
AGE, ROCK, CUSTOM, and XPLOD).
You can store and adjust the equalizer settings
for frequency and level.
Selecting the equalizer curve
1 Press (SOURCE) to select a source
(radio or CD).
2 Press (EQ7) repeatedly until the
desired equalizer curve.
Each time you press (EQ7), the item
changes.
To cancel the equalizing effect, select OFF.
After three seconds, the display returns to the
normal playback mode.
Adjusting the equalizer curve
1 Press (MENU).
2 Press either side of (PRESET)
repeatedly until EQ7 TUNE appears,
then press (ENTER).
3 Press either side of (SEEK) to select
the desired equalizer curve, then
press (ENTER).
Each time you press (SEEK), the item
changes.
4 Select the desired frequency and level.
1 Press either side of (SEEK) to select
the desired frequency.
Each time you press (SEEK), the
frequency changes.
62 (Hz) y 157 (Hz) y 396 (Hz) y
1k (Hz) y 2.5k (Hz) y 6.3k (Hz) y
16k (Hz)
2Press either side of (PRESET) to
adjust the desired volume level.
The volume level is adjustable by 1 dB
steps from 10 dB to +10 dB.
To restore the factory-set equalizer curve,
press (ENTER) for 2 seconds.
5 Press (MENU) twice.
When the effect setting is complete, the
normal playback mode appears.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122

Sony cdx l550x Le manuel du propriétaire

Catégorie
Récepteurs multimédia de voiture
Taper
Le manuel du propriétaire