Dream On Me 632 Manuel utilisateur

Marque: Dream On Me

Modèle: 632

Catégorie: Meubles de bébé

Taper: Manuel utilisateur

Ci-dessous, vous trouverez de brèves informations pour lit de bébé 632. Ce document fournit des instructions étape par étape pour l'assemblage du lit de bébé, y compris une liste des outils nécessaires et des avertissements de sécurité importants. Il souligne également l'importance d'utiliser le matelas fourni par Dream On Me et donne des informations sur la conversion du lit de bébé en lit jumeau. De plus, il contient des directives pour l'entretien et le nettoyage du produit.

Adult assembly required.

Small parts may present choking hazard prior to assembly.

Enclosed please find simple step-by-step instructions to help you

quickly assemble your products. Before you begin we recommend

that you following the steps below:

1. Please read the instructions thoroughly.

2. Identify all parts and hardware.

3. You will need the following tools:

Philips head screw driver

Flat head screw driver

Hammer

Do Not Use Power Drills or Drivers

To protect your parts during assembly please place them on a soft

surface.

To clean surface use only water on a damp cloth. Do not use

window cleaners or cleaning abrasives as it will scratch the surface

and could damage the protective coating.

ASSEMBLY INSTRUCTIONS

ITEM NO: 632

Please note that the warning sticker is placed on the cribs to keep parents and

caregivers informed it is a requirement by law under CPSC And ASTM.

We do apologize for any inconvenience this may cause you.

Dream On Me Inc.

Read all instructions BEFORE assembly and USE of product.

KEEP INSTRUCTIONS FOR FUTURE USE.

1532 S WASHINGTON AVE

PISCATAWAY TWP NJ 08854

Email: [email protected]

www.dreamonme.com

632

Comes with a mattress.

Scan the QR code to register your product

https://dreamonme.com/customercare/registration/

WARNING !

MADE IN CHINA

· FAILURE TO FOLLOW THESE WARNINGS AND THE ASSEMBLY INSTRUCTIONS

COULD RESULT IN SERIOUS INJURY OR DEATH.

· READ ALL INSTRUCTIONS BEFORE ASSEMBLING CRIB. KEEP INSTRUCTIONS

FOR FUTURE USE.

USE ONLY MATTRESS/PAD PROVIDED BY DREAM ON ME WHICH MUST BE AT

LEAST 37-3/4 IN.LONG BY 23-3/4 WIDE AND NOT MORE THAN 2 IN.THICK.

· CHECK THIS PRODUCT FOR DAMAGED HARDWARE, LOOSE JOINTS, MISSING

PARTS OR SHARP EDGES BEFORE AND AFTER ASSEMBLY.A FREQUENT CHECK

DAMAGED OR BROKEN.CONTACT DREAM ON ME INC.1532 S WASHINGTON AVE

PISCATAWAY TWP NJ 08854

FOR REPLACEMENT PARTS AND INSTRUCTIONAL

LITERATURE IF NEEDED.DO NOT SUBSTITUTE PARTS.

· TO REDUCE THE RISK OF SIDS, PEDIATRICIANS RECOMMEND HEALTHY INFANTS

BE PLACED ON THEIR BACKS TO SLEEP, OTHERWISE ADVISED BY YOUR

PHYSICIAN.

· STRINGS CAN CAUSE STRANGULATION! DO NOT PLACE ITEMS WITH A STRING

AROUND A CHILD’S

NECK,SUCH AS HOOD STRINGS OR PACIFIER CORDS.

DO NOT SUSPEND STRINGS OVER A CRIB OR ATTACH A

STRINGS TO TOYS.

· TO HELP PREVENT STRANGULATION TIGHTEN ALL FASTENERS. A CHILD CAN

TRAP PARTS OF THE BODY OR CLOTHING ON LOOSE FASTENERS.

· DO NOT PLACE CRIB NEAR WINDOWS WHERE CORDS FROM BLINDS OR DRAPS

MAY STRANGLE A CHILD.

· WHEN CHILD IS ABLE TO PULL TO A STANDING POSITION, SET MATTRESS TO THE

LOWEST POSITION AND REMOVE BUMPER PADS, LARGE TOYS AND OTHER

OBJECTS THAT COULD SERVE AS STEPS FOR CLIMBING OUT.

· WHEN CHILD IS ABLE TO CLIMB OUT OR REACH THE HEIGHT OF 35 IN.(89CM),

THE CRIB SHALL NO LONGER BE USED.

· DO NOT USE A WATER MATTRESS WITH THIS CRIB.

· IF REFINISHING, USE A NON-TOXIC FINISH SPECIFIED FOR CHILDREN'S

PRODUCTS.

· NEVER USE PLASTIC SHIPPING BAGS OR OTHER PLASTIC FILM AS MATTRESS

COVERS BECAUSE THEY CAN CAUSE SUFFOCATION.

· INFANTS CAN SUFFOCATE IN GAPS BETWEEN A MATTRESS TOO SMALL OR TOO

THICK AND PRODUCT SIDES.ON SOFT BEDDING NEVER ADD A MATTRESS,

PILLOW,COMFORTER,OR PADDING.

THE PRODUCT,INCLUDING SIDE RAILS,MUST BE FULLY ERECTED PRIOR TO USE.

ALWAYS PROVIDE THE SUPERVISION NECESSARY FOR THE CONTINUED SAFETY

OF YOUR CHILD.WHEN USED FOR PLAYING,NEVER LEAVE CHILD UNATTENDED.

· FOLLOW WARNINGS ON ALL PRODUCTS IN A CRIB. SEE HEAD PANNEL AND

MATTRESS SUPPORT FOR WARNINGS AND INSTRUCTIONS.

SHOULD BE MADE DURING USE.DO NOT USE CRIB IF ANY PARTS ARE MISSING,

e.5/8” Allen head Bolt 16 pcs

Nut x 4 pcs

Écrou x 4 pcs

16 pcs

a. 1-5/8” Allen head Bolt 8 pcs

B. Front Rail (1PC)

A. Back Rail (1PC)

A. B.

CONNECTION HARDWARE

QUINCAILLERIE DE CONNEXION

d. Allen Wrench 1 pcs

CRIB COMPONENTS

C. Left side pannel (1PC)

b. 1” Allen head Bolt 8 pcs

b. Vis à six pans 1” 8 pcs

5/8”

No drills necessary.

Do not use power

screwdriver

Phillips Screwdriver

(not supplied)

(1PC) (1PC)

D. Right side pannel (1PC)

J. Wooden mattress base (1PC)

Left support brackets (2PCS)

Crochet du support de

matelas gauche(2PCS)

s. v.

Right support brackets (2PCS)

Crochet du support de

matelas droit (2PCS)

K. Mattress (1PC)

K. Matelas (1PC)

E. Foot (4PCS)

E. Pied (4PCS)

1-5/8” 8 pcs

Foot Bracket (4PCS)

Pièce de fixation du pied (4PCS)

f.Wrench 1pc

f.Cle 1pc

STEP 1

Attach the back rail (A) and front rail (B) to the left side panel (C)

and right side panel (D) by using allen head

bolts(a).

(A)

(E) (F)

X 8

STEP 2

STEP 3

Attach the

Left support brackets

(r) and

Right support brackets

(s) to the

Wooden mattress base(J)

by using allen head bolts(b)

and Nut(c) with wrench (f).

Fixez les supports

gauche (r) et droit (s)

à la base du matelas

en bois (J) à l’aide des

vis à tête à six pans

creux (b) et

de l’écrou (c).

Attach the wooden mattress base(J) to the

back rail (A) and the front rail (B) by using

allen head bolts (e).

X 4

eAD

X 4

STEP 4

Attach the foot brackets (v) to the

foots (E) by using allen head bolts (b).

TIGHTEN ALL SCREWS.

X 4

1.Remove the Wooden mattress

base(J) and remove the right

side pannel(I) and the left side

pannel (H).

2.Use the front rail as footboard

of the bed,the back rail as headboard

3.Connect the headboard and footboard

by a standard hollywood frame

which is sold separately.

(FRAME RAIL NOT INCLUDED TO CONVERT TO A TWIN BED I)

Converting crib to a twin bed I

STEP 5

Put the mattress(K) into the bed.

Converting crib to a twin bed II

You have the option to convert crib to a twin bed II.

1:Use the back rail as the headboard of twin bed II.

3:Connect the assembled parts and headboard of twin bed to the kits ( legs, long rails,and

hardware ) which are not included and sold separately.

2:Connect the left foot platform and the right foot platform to the rail which are not included and

sold separately.

Conversion kit is sold separately

LIMITED WARRANTY

workmanship and agrees to remedy any such defect.

This is solely limited to the repair or replacement of defective furniture

components and no assembly labor is included.

assembled, subjected to misuse or abuse or which has been altered or

repaired in any way.

rights which vary from State to State.

WARNING: Should this product become damaged, and/or components

are broken or missing, DO NOT USE

Enter our monthly giveaway!

Simply scan the QRcode to register.

Chat with us!

For any questions or concerns or feedback.

1532, S. Washington Avenue

Piscataway, NJ 08854

E-mail: [email protected]

www.dreamonme.com

to get your nursery featured on our social media.

@dreamonmeinc @dreamonmeinc

Dream On Me 632 Manuel utilisateur

Marque: Dream On Me

Modèle: 632

Catégorie: Meubles de bébé

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: Dream On Me 632 User manual

Dream On Me 632 Manuel utilisateur

Dream On Me 632 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents