Dream On Me 632 Manuel utilisateur

Marque
Dream On Me
Modèle
632
Catégorie
Meubles de bébé
Taper
Manuel utilisateur
1
Adult assembly required.
Small parts may present choking hazard prior to assembly.
Enclosed please find simple step-by-step instructions to help you
quickly assemble your products. Before you begin we recommend
that you following the steps below:
1. Please read the instructions thoroughly.
2. Identify all parts and hardware.
3. You will need the following tools:
Philips head screw driver
Flat head screw driver
Hammer
Do Not Use Power Drills or Drivers
To protect your parts during assembly please place them on a soft
surface.
To clean surface use only water on a damp cloth. Do not use
window cleaners or cleaning abrasives as it will scratch the surface
and could damage the protective coating.
ASSEMBLY INSTRUCTIONS
ITEM NO: 632
s
Please note that the warning sticker is placed on the cribs to keep parents and
caregivers informed it is a requirement by law under CPSC And ASTM.
We do apologize for any inconvenience this may cause you.
Dream On Me Inc.
Read all instructions BEFORE assembly and USE of product.
KEEP INSTRUCTIONS FOR FUTURE USE.
1532 S WASHINGTON AVE
PISCATAWAY TWP NJ 08854
Email: [email protected]
www.dreamonme.com
632
Comes with a mattress.
Scan the QR code to register your product
https://dreamonme.com/customercare/registration/
2
3
WARNING !
MADE IN CHINA
· FAILURE TO FOLLOW THESE WARNINGS AND THE ASSEMBLY INSTRUCTIONS
COULD RESULT IN SERIOUS INJURY OR DEATH.
· READ ALL INSTRUCTIONS BEFORE ASSEMBLING CRIB. KEEP INSTRUCTIONS
FOR FUTURE USE.
USE ONLY MATTRESS/PAD PROVIDED BY DREAM ON ME WHICH MUST BE AT
LEAST 37-3/4 IN.LONG BY 23-3/4 WIDE AND NOT MORE THAN 2 IN.THICK.
· CHECK THIS PRODUCT FOR DAMAGED HARDWARE, LOOSE JOINTS, MISSING
PARTS OR SHARP EDGES BEFORE AND AFTER ASSEMBLY.A FREQUENT CHECK
DAMAGED OR BROKEN.CONTACT DREAM ON ME INC.1532 S WASHINGTON AVE
PISCATAWAY TWP NJ 08854
FOR REPLACEMENT PARTS AND INSTRUCTIONAL
LITERATURE IF NEEDED.DO NOT SUBSTITUTE PARTS.
· TO REDUCE THE RISK OF SIDS, PEDIATRICIANS RECOMMEND HEALTHY INFANTS
BE PLACED ON THEIR BACKS TO SLEEP, OTHERWISE ADVISED BY YOUR
PHYSICIAN.
· STRINGS CAN CAUSE STRANGULATION! DO NOT PLACE ITEMS WITH A STRING
AROUND A CHILD’S
NECK,SUCH AS HOOD STRINGS OR PACIFIER CORDS.
DO NOT SUSPEND STRINGS OVER A CRIB OR ATTACH A
STRINGS TO TOYS.
· TO HELP PREVENT STRANGULATION TIGHTEN ALL FASTENERS. A CHILD CAN
TRAP PARTS OF THE BODY OR CLOTHING ON LOOSE FASTENERS.
· DO NOT PLACE CRIB NEAR WINDOWS WHERE CORDS FROM BLINDS OR DRAPS
MAY STRANGLE A CHILD.
· WHEN CHILD IS ABLE TO PULL TO A STANDING POSITION, SET MATTRESS TO THE
LOWEST POSITION AND REMOVE BUMPER PADS, LARGE TOYS AND OTHER
OBJECTS THAT COULD SERVE AS STEPS FOR CLIMBING OUT.
· WHEN CHILD IS ABLE TO CLIMB OUT OR REACH THE HEIGHT OF 35 IN.(89CM),
THE CRIB SHALL NO LONGER BE USED.
· DO NOT USE A WATER MATTRESS WITH THIS CRIB.
· IF REFINISHING, USE A NON-TOXIC FINISH SPECIFIED FOR CHILDREN'S
PRODUCTS.
· NEVER USE PLASTIC SHIPPING BAGS OR OTHER PLASTIC FILM AS MATTRESS
COVERS BECAUSE THEY CAN CAUSE SUFFOCATION.
· INFANTS CAN SUFFOCATE IN GAPS BETWEEN A MATTRESS TOO SMALL OR TOO
THICK AND PRODUCT SIDES.ON SOFT BEDDING NEVER ADD A MATTRESS,
PILLOW,COMFORTER,OR PADDING.
THE PRODUCT,INCLUDING SIDE RAILS,MUST BE FULLY ERECTED PRIOR TO USE.
ALWAYS PROVIDE THE SUPERVISION NECESSARY FOR THE CONTINUED SAFETY
OF YOUR CHILD.WHEN USED FOR PLAYING,NEVER LEAVE CHILD UNATTENDED.
· FOLLOW WARNINGS ON ALL PRODUCTS IN A CRIB. SEE HEAD PANNEL AND
MATTRESS SUPPORT FOR WARNINGS AND INSTRUCTIONS.
SHOULD BE MADE DURING USE.DO NOT USE CRIB IF ANY PARTS ARE MISSING,
=
4
5
e.5/8” Allen head Bolt 16 pcs
c.
Nut x 4 pcs
c.
Écrou x 4 pcs
16 pcs
a. 1-5/8” Allen head Bolt 8 pcs
B. Front Rail (1PC)
A. Back Rail (1PC)
A. B.
CONNECTION HARDWARE
QUINCAILLERIE DE CONNEXION
d. Allen Wrench 1 pcs
CRIB COMPONENTS
C. Left side pannel (1PC)
C.
b. 1” Allen head Bolt 8 pcs
b. Vis à six pans 1” 8 pcs
5/8”
No drills necessary.
Do not use power
screwdriver
Phillips Screwdriver
(not supplied)
(1PC) (1PC)
D. Right side pannel (1PC)
D.
J. Wooden mattress base (1PC)
r.
Left support brackets (2PCS)
Crochet du support de
matelas gauche(2PCS)
s. v.
Right support brackets (2PCS)
Crochet du support de
matelas droit (2PCS)
K. Mattress (1PC)
K. Matelas (1PC)
E. Foot (4PCS)
E. Pied (4PCS)
1-5/8” 8 pcs
Foot Bracket (4PCS)
Pièce de fixation du pied (4PCS)
f.Wrench 1pc
f.Cle 1pc
STEP 1
Attach the back rail (A) and front rail (B) to the left side panel (C)
and right side panel (D) by using allen head
bolts(a).
6
(A)
(E) (F)
C
a
B
A
D
a
a
a
a
a
a
X 8
B
D
a
1
7
STEP 2
2
STEP 3
3
Attach the
Left support brackets
(r) and
Right support brackets
(s) to the
Wooden mattress base(J)
by using allen head bolts(b)
and Nut(c) with wrench (f).
Fixez les supports
gauche (r) et droit (s)
à la base du matelas
en bois (J) à l’aide des
vis à tête à six pans
creux (b) et
de l’écrou (c).
J
r
r
s
s
c
c
b
b
Attach the wooden mattress base(J) to the
back rail (A) and the front rail (B) by using
allen head bolts (e).
c
b
c
b
X 4
c
b
X 4
J
J
B
C
J
CB
J
AD
eAD
X 4
f
8
STEP 4
4
Attach the foot brackets (v) to the
foots (E) by using allen head bolts (b).
TIGHTEN ALL SCREWS.
E
b
v
E
e
e
v
v
v
v
v
C
B
C
J
B
J
E
E
E
E
X 4
9
1.Remove the Wooden mattress
base(J) and remove the right
side pannel(I) and the left side
pannel (H).
2.Use the front rail as footboard
of the bed,the back rail as headboard
3.Connect the headboard and footboard
by a standard hollywood frame
which is sold separately.
(FRAME RAIL NOT INCLUDED TO CONVERT TO A TWIN BED I)
Converting crib to a twin bed I
STEP 5
5
Put the mattress(K) into the bed.
K
10
Converting crib to a twin bed II
You have the option to convert crib to a twin bed II.
1:Use the back rail as the headboard of twin bed II.
3:Connect the assembled parts and headboard of twin bed to the kits ( legs, long rails,and
hardware ) which are not included and sold separately.
2:Connect the left foot platform and the right foot platform to the rail which are not included and
sold separately.
Conversion kit is sold separately
11
LIMITED WARRANTY
workmanship and agrees to remedy any such defect.
This is solely limited to the repair or replacement of defective furniture
components and no assembly labor is included.
assembled, subjected to misuse or abuse or which has been altered or
repaired in any way.
rights which vary from State to State.
WARNING: Should this product become damaged, and/or components
are broken or missing, DO NOT USE
Enter our monthly giveaway!
Simply scan the QRcode to register.
Chat with us!
For any questions or concerns or feedback.
1532, S. Washington Avenue
Piscataway, NJ 08854
E-mail: [email protected]
www.dreamonme.com
Follow us on
to get your nursery featured on our social media.
@dreamonmeinc @dreamonmeinc
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Dream On Me 632 Manuel utilisateur

Marque
Dream On Me
Modèle
632
Catégorie
Meubles de bébé
Taper
Manuel utilisateur
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes

Autres documents