Yale Smart Cabinet Lock Manuel utilisateur

Smart Cabinet Lock
Yale
Marque
Yale
Modèle
Smart Cabinet Lock
Taper
Manuel utilisateur
Smart Cabinet Lock
Installation Instructions
Glow in the Dark
Emergency Release
YRCB490-MNL-0014 Rev D
Trusted every day Part of ASSA ABLOY
Smart Lock
x2
M4x12 Screw
x2
Lock Post
Battery
Lock Post
Guide
Template
x5
Mounting Tape
x4
M3x10 Screw
1 4
Double Door
Plate
Mounting Bracket
Long Lock Post
YRCB490-MNL-0014 Rev D
Trusted every day Part of ASSA ABLOY
24/7 1-855-213-5841 support@yalelock.com
YRCB490-MNL-0014 Rev D
Trusted every day Part of ASSA ABLOY
2
Download the Yale Access App
1
Install Included Battery
2
Lock will automatically unlock if
battery dies. The App will alert
you when battery is low.
NOTE TO APPLE CUSTOMERS
To control this HomeKit-enabled accessory, the latest
version of iOS or iPadOS is recommended. Controlling
this HomeKit-enabled accessory automatically and
away from home requires a HomePod, Apple TV, or
iPad set up as a home hub. It is recommended that you
update to the latest software and operating system.
Create an account if you don’t already have one.
If you already use the August App, use the same login.
Select “Set up a Device” from the menu.
Scan the QR code located on the battery door or on
packaging. If you run into issues, tap "Can't Scan the
Code?" and enter the serial number located on your
packaging (starts with Q1).
YRCB490-MNL-0014 Rev D
Trusted every day Part of ASSA ABLOY
3
Attach 3M Tape to Mounting
Bracket and Lock Post
3
Slide Mounting Bracket onto
Bottom of Smart Lock
4
Clean surface before applying tape.
After placement, wait 24 hours for
adhesive to bond to max strength.
If cabinet has a face frame or lip
(max 1” high x max 1-1/4” deep),
use long lock post.
YRCB490-MNL-0014 Rev D
Trusted every day Part of ASSA ABLOY
4
Slide Lock Post Guide onto
Lock Post
5
Attach Lock Post to Smart Lock
6
YRCB490-MNL-0014 Rev D
Trusted every day Part of ASSA ABLOY
Remove 3M film
from mounting bracket.
Install Smart Cabinet Lock
7
Mounting template cannot be
used to position lock when
using long lock post.
5
Place template in desired mounting location -
as far from door hinges as possible.
YRCB490-MNL-0014 Rev D
Trusted every day Part of ASSA ABLOY
Attach Lock Post to Door
8
6
The lock has been tested to resist
pulling forces up to 80 lbs.
YRCB490-MNL-0014 Rev D
Trusted every day Part of ASSA ABLOY
7
Remove Lock Post Guide
9
Test Operation
YRCB490-MNL-0014 Rev D
Trusted every day Part of ASSA ABLOY
8
If your lock came with a Yale Connect Wi-Fi Bridge (select models),
the Yale Access App will walk you through set up.
This must be plugged in within 10 feet of your Smart Cabinet Lock.
Congratulations!
You've completed the installation of your Yale® Smart Cabinet Lock.
NOTE TO INSTALLER AND CONSUMER
A second lock post is provided as a spare in the
event the cabinet door must be forced open and
installed lock post is broken.
Set Up Yale Connect Wi-Fi Bridge
O
optional
YRCB490-MNL-0014 Rev D
Trusted every day Part of ASSA ABLOY
9
x2
x2
Screw Mounting
Remove lock from mounting bracket
to access screw holes.
Make sure screws are no
longer than thickness of
your cabinet door.
O
optional
Top Of Cabinet Installation
O
optional
YRCB490-MNL-0014 Rev D
Trusted every day Part of ASSA ABLOY
10
Double Door Plate
O
optional
x2
or
Use screws OR double sided tape to
adhere the double door plate when
installing the Smart Cabinet Lock on the
adjacent door of a double door cabinet.
YRCB490-MNL-0014 Rev D
Trusted every day Part of ASSA ABLOY
11
Long Lock Post
O
optional
The Long Lock Post is used on cabinets
with a face frame or lip no taller than
1” and no deeper than 1-1/4”.
Mounting template
cannot be used to
position lock when
using long lock post.
YRCB490-MNL-0014 Rev D
Trusted every day Part of ASSA ABLOY
Warning: Changes or modifications to this device, not expressly approved by
Yale Home could void the user's authority to operate the equipment.
Yale® is a registered trademark of Yale Home. Use of the Works with Apple badge means that an
accessory has been designed to work specifically with the technology identified in the badge and has
been certified by the developer to meet Apple performance standards. Apple is not responsible for the
operation of this device or its compliance with safety and regulatory standards. Other products' brand
names may be trademarks or registered trademarks of their respective owners and are mentioned for
reference purposes only. © Copyright 2021. All rights reserved. Reproduction in whole or in part
without the express written permission of Yale Home is prohibited.
24/7 Support : 1-855-213-5841 • US.YaleHome.com
Yale Home
FCC:
Contain FCC ID: 2ABFGYRIZW2USTS1
Model: YRCB490BLEWSP
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS.
(1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE
RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE
UNDESIRED OPERATION.
Industry Canada:
Contain 11626AYRIZW2USTS1
Model: YRCB490BLEWSP
Section 7.1.2 of RSSGEN Under Industry Canada regulations,
this radio transmitter may only operate using an antenna of a
type and maximum (or lesser) gain approved for the
transmitter by Industry Canada. To reduce potential radio
interference to other users, the antenna type and its gain
should be so chosen that the equivalent isotropically radiated
power (e.i.r.p.) is not more than that necessary for successful
communication.
En vertu des règlements d’Industrie Canada, cet émetteur
radio ne peut fonctionner avec une antenne d’un type et un
maximum (ou moins) approuves pour gagner de l’émetteur par
Industrie Canada. Pour réduire le risque d’interférence aux
autres utilisateurs, le type d’antenne et son gain doivent être
choisies de façon que la puissance isotrope rayonnée
équivalente (PIRE) ne dépasse pas ce qui est nécessaire pour
une communication réussie.
Section 7.1.3 or RSSGEN This Device complies with Industry
Canada License-exempt RSS standard(s). Operation is subject
to the following two conditions: 1) this device may not cause
interference, and 2) this device must accept any interference,
including interference that may cause undesired operation of
the device.
Cet appareil est conforme avec Industrie Canada RSS standard
exemptes de licence(s). Son fonctionnement est soumis aux
deux conditions suivantes: 1) ce dispositif ne peut causer des
interférences, et 2) cet appareil doit accepter toute
interférence, y compris les interférences qui peuvent causer un
mauvais fonctionnement du dispositif.
This radio transmitter 6982AYRHCPZW0FM has been
approved by Industry Canada to operate with the antenna
types listed below with the maximum permissible gain
indicated. Antenna types not included in this list, having a gain
greater than the maximum gain indicated for that type, are
strictly prohibited for use with this device.
Le présent émetteur radio 6982AYRHCPXW0FM a été
approuve par Industrie Canada pour fonctionner avec les types
d’antenne énumérés ci-dessous et ayant un gain admissible
maximal. Les types d’antenne non inclus dans cette liste, et
dont le gain est supérieur au gain maximal indique, sont
strictement interdits pour l’exploitation de l’émetteur.
CAN ICES3B/NMB3B
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Yale Smart Cabinet Lock Manuel utilisateur

Smart Cabinet Lock
Yale
Marque
Yale
Modèle
Smart Cabinet Lock
Taper
Manuel utilisateur
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes

Autres documents