Bauknecht GFG461LV Manuel utilisateur

Marque: Bauknecht

Modèle: GFG461LV

Catégorie: Cuisinières

Taper: Manuel utilisateur

THANK YOU for purchasing this high-quality product. If you should experience a problem not covered in TROUBLESHOOTING,

please visit our website at www.whirlpool.ca for additional information. If you still need assistance, call us at 1-800-807-6777.

You will need your model and serial number located on the oven frame behind the storage drawer panel.

GAS RANGE

USER INSTRUCTIONS

Table of Contents

RANGE SAFETY.......................................................................................2

The Anti-Tip Bracket .............................................................................3

FEATURE GUIDE .....................................................................................4

COOKTOP USE........................................................................................6

Sealed Surface Burners ........................................................................6

OVEN USE ................................................................................................7

Electronic Oven Controls......................................................................7

Sabbath Mode ......................................................................................8

Aluminum Foil........................................................................................8

Positioning Racks and Bakeware.........................................................8

Oven Vent..............................................................................................9

Baking and Roasting.............................................................................9

Broiling ..................................................................................................9

Convection Cooking .............................................................................9

Rapid Preheat .......................................................................................9

Timed Cooking....................................................................................10

Warming Drawer (on some models) ...................................................10

RANGE CARE.........................................................................................11

Self-Cleaning Cycle (on some models) ..............................................11

General Cleaning.................................................................................12

Oven Light...........................................................................................12

TROUBLESHOOTING............................................................................13

ACCESSORIES ......................................................................................14

WARRANTY............................................................................................15

W10196150B

RANGE SAFETY

You can be killed or seriously injured if you don't immediately

You

can be killed or seriously injured if you don't

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

WARNING: If the information in this manual is not followed exactly, a fire or explosion

may result causing property damage, personal injury or death.

– Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this

or any other appliance.

– WHAT TO DO IF YOU SMELL GAS:

•

Do not try to light any appliance.

•

Do not touch any electrical switch.

•

Do not use any phone in your building.

•

Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's

instructions.

•

If you cannot reach your gas supplier, call the fire department.

– Installation and service must be performed by a qualified installer, service agency or

the gas supplier.

WARNING: Gas leaks cannot always be detected by smell.

Gas suppliers recommend that you use a gas detector approved by UL or CSA.

For more information, contact your gas supplier.

If a gas leak is detected, follow the “What to do if you smell gas” instructions.

State of California Proposition 65 Warnings:

WARNING: This product contains a chemical known to the State of California to cause cancer.

WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.

The Anti-Tip Bracket

The range will not tip during normal use. However, the range can tip if you apply too much force or weight to the open door without the anti-

tip bracket fastened down properly.

Tip Over Hazard

A child or adult can tip the range and be killed.

Connect anti-tip bracket to rear range foot.

Reconnect the anti-tip bracket, if the range is moved.

See the installation instructions for details.

Failure to follow these instructions can result in death or serious burns to children and adults.

Anti-Tip Bracket

Making sure the anti-tip bracket is installed:

• Slide range forward.

• Look for the anti-tip bracket securely attached to floor.

• Slide range back so rear range foot is under anti-tip bracket.

Range Foot

WARNING

SAVE THESE INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electrical shock, injury to

persons, or damage when using the range, follow basic

precautions, including the following:

■ WARNING:

TO REDUCE THE RISK OF TIPPING OF THE

RANGE, THE RANGE MUST BE SECURED BY PROPERLY

INSTALLED ANTI-TIP DEVICES. TO CHECK IF THE DEVICES

ARE INSTALLED PROPERLY, SLIDE RANGE FORWARD, LOOK

FOR ANTI-TIP BRACKET SECURELY ATTACHED TO FLOOR,

AND SLIDE RANGE BACK SO REAR RANGE FOOT IS UNDER

ANTI-TIP BRACKET.

■ WARNING:

NEVER use this appliance as a space heater to

heat or warm the room. Doing so may result in carbon monoxide

poisoning and overheating of the oven.

■ WARNING:

NEVER cover any slots, holes or passages in the

oven bottom or cover an entire rack with materials such as

aluminum foil. Doing so blocks air flow through the oven and may

cause carbon monoxide poisoning. Aluminum foil linings may also

trap heat, causing a fire hazard.

■ CAUTION:

Do not store items of interest to children in cabinets

above a range or on the backguard of a range – children climbing

on the range to reach items could be seriously injured.

■

Proper Installation – The range, when installed, must be electrically

grounded in accordance with local codes or, in the absence of

local codes, with the National Electrical Code, ANSI/NFPA 70. In

Canada, the range must be electrically grounded in accordance

with Canadian Electrical Code. Be sure the range is properly

installed and grounded by a qualified technician.

■

This range is equipped with a three-prong grounding

plug for your protection against shock hazard and

should be plugged directly into a properly grounded

receptacle. Do not cut or remove the grounding

prong from this plug.

■

Disconnect power before servicing.

■

Injuries may result from the misuse of appliance

doors or drawers such as stepping, leaning, or

sitting on the doors or drawers.

■

Maintenance – Keep range area clear and free from

combustible materials, gasoline, and other

flammable vapors and liquids.

■

Storage in or on the Range – Flammable materials

should not be stored in an oven or near surface

units.

■

Top burner flame size should be adjusted so it does

not extend beyond the edge of the cooking utensil.

For self-cleaning ranges –

■

Before Self-Cleaning the Oven – Remove broiler pan

and other utensils. Wipe off all excessive spillage

before initiating the cleaning cycle.

FEATURE GUIDE

This manual covers several models. Your model may have some or all of the items listed. Refer to this manual or the Customer Care section

of our website at www.whirlpool.ca for more detailed instructions.

WARNING

Food Poisoning Hazard

Do not let food sit in oven more than one hour before

or after cooking.

Doing so can result in food poisoning or sickness.

KEYPAD FEATURE INSTRUCTIONS

OVEN LIGHT Oven cavity light While the oven door is closed, press the OVEN LIGHT switch to turn the light on and off. The

oven light will come on when the oven door is opened. The oven light will not come on during

the Self-Clean cycle.

PRECISE

CLEAN

Self-clean cycle See the “Range Care” section.

CLOCK Clock This clock can use a 12 or 24-hour cycle. See “Oven Use” section.

1. Check that the oven and Timer are off.

2. Press CLOCK.

3. Press SET TEMP/TIME “+” or “-” arrow pads to set the time of day.

4. Press START.

TIMER

SET/OFF

Oven timer The Timer can be set in hours or minutes up to 9 hours and 59 minutes.

1. Press TIMER SET/OFF.

2. Press SET TEMP/TIME “+” or “-” arrow pads to set the length of time.

3. Press START to begin the countdown. If enabled, end-of-cycle tones will sound at end of

countdown.

4. Press TIMER SET/OFF twice to cancel the Timer. Do not press the CANCEL/OFF keypad

because the oven will turn off.

5. If the Timer is running, but not in the display, press TIMER SET/OFF to display the

countdown for 5 seconds.

WARM

DRAWER

ON/OFF

Warming drawer

(on some models)

Press WARM DRAWER ON/OFF to select the warming drawer function.

Press WARM DRAWER ON/OFF to turn off the heating element. See the “Warming Drawer”

section.

CONTROL

LOCK

hold 3 sec

Oven control

lockout

No keypads will function with the controls locked.

1. Check that the oven and the Timer are off.

2. Press and hold CONTROL LOCK keypad for 3 seconds.

3. If enabled, a tone will sound, and “CONTROL LOCKED” will be displayed.

4. Repeat to unlock.

BAKE Baking and

roasting

1. Press BAKE.

2. Press SET TEMP/TIME “+” or “-” arrow pads to set a temperature other than 350°F (175°C)

in 5° increments between 170°F and 550°F (75°C and 288°C).

3. Press START.

4. To change the temperature repeat steps 1 and 2. Press START or wait 5 seconds for the

change to take effect.

5. Press CANCEL/OFF when finished.

BROIL Broiling 1. Position cookware in oven and close the oven door.

2. Press BROIL.

3. Press SET TEMP/TIME “+” or “-” arrow pads to set a temperature other than 550°F (285°C)

in 5° increments between 170°F and 550°F (75°C and 288°C).

4. Press START.

5. Press CANCEL/OFF when finished.

CONVECT Convection

cooking

See “Convection Cooking” section for preset convection cooking options.

1. Press CONVECT.

2. Press CONVECT again to scroll through options.

3. Press SET TEMP/TIME “+” or “-” arrow pads to set a temperature other than 325°F (162°C)

in 5° increments between 170°F and 550°F (75°C and 288°C).

4. Press START.

5. To change the temperature repeat steps 1 and 3. Press START or wait 5 seconds for the

change to take effect.

6. Press CANCEL/OFF when finished.

RAPID

PREHEAT

Preheat

temperature

If desired, press RAPID PREHEAT when using the Bake or Convect functions for faster

preheating of the oven cavity. See “Rapid Preheat” section.

KEEP WARM Hold warm Food must be at serving temperature before placing it in the warmed oven.

1. Press KEEP WARM.

2. Press SET TEMP/TIME “+” or “-” arrow pads to set a temperature between 145°F (63°C) and

190°F (88°C). The default temperature is 170°F (75°C).

3. Press START.

4. Press CANCEL/OFF when finished.

COOK TIME Timed cooking Timed Cooking allows the oven to be set to turn on at a certain time of day, cook for a set length

of time, and/or shut off automatically. Delay start should not be used for foods such as breads

and cakes because they may not bake properly.

To set a Timed Cook or a Delayed Timed Cook see “Timed Cooking” section.

START TIME Delayed start The Start Time keypad is used to enter the starting time for an oven function with a delayed

start.

SET

TEMP/TIME

Temperature and

time adjust

The “+” or “-” arrow pads are used to adjust time and temperature settings.

START Cooking start The Start pad begins any oven function. If start is not pressed within 30 seconds after pressing

a keypad, the function is canceled and the time of day is displayed.

CANCEL/OFF Range function The Cancel/Off keypad stops any oven function except the Clock, Timer, and Control Lock.

KEYPAD FEATURE INSTRUCTIONS

COOKTOP USE

Electric igniters automatically light the surface burners when

control knobs are turned to IGNITE.

Before setting a control knob, place filled cookware on the grate.

Do not operate a burner using empty cookware or without

cookware on the grate.

To Set:

1. Push in and turn knob counterclockwise to IGNITE.

All 4 surface burners will click. Only the burner with the control

knob turned to IGNITE will produce a flame.

2. Turn knob to anywhere between HIGH and LOW.

Power™ Burner Feature

The right and left front burners are designed to give ultra-power

when fully on. They can be used to rapidly bring liquid to a boil and

to cook large quantities of food.

ACCUSIMMER

Burner Feature

The ACCUSIMMER

feature allows for more precise simmering and

low temperature cooking. It is the right rear burner.

Power Failure

In case of prolonged power failure, the surface burners can be lit

manually. Hold a lit match near a burner and turn knob

counterclockwise to IGNITE. After burner lights, turn knob to

desired setting.

Sealed Surface Burners

IMPORTANT: Do not obstruct the flow of combustion and

ventilation air around the burner grate edges.

Burner cap: Always keep the burner cap in place when using a

surface burner. A clean burner cap will help avoid poor ignition and

uneven flames. Always clean the burner cap after a spillover and

routinely remove and clean the caps according to the “General

Cleaning” section.

Gas tube opening: Gas must flow freely throughout the gas tube

opening for the burner to light properly. Keep this area free of soil

and do not allow spills, food, cleaning agents or any other material

to enter the gas tube opening. Keep spillovers out of the gas tube

by always using a burner cap.

Burner ports: Check burner flames occasionally for proper size

and shape as shown above. A good flame is blue in color, not

yellow. Keep this area free of soil and do not allow spills, food,

cleaning agents or any other material to enter the burner ports.

To Clean:

IMPORTANT: Before cleaning, make sure all controls are off and

the oven and cooktop are cool. Do not use oven cleaners, bleach

or rust removers.

1. Remove the burner cap from the burner base and clean

according to “General Cleaning” section.

2. Clean the gas tube opening with a damp cloth.

3. Clean clogged burner ports with a straight pin as shown. Do

not enlarge or distort the port. Do not use a wooden toothpick.

If the burner needs to be adjusted, contact a trained repair

specialist.

WARNING

Fire Hazard

Do not let the burner flame extend beyond the edge of

the pan.

Turn off all controls when not cooking.

Failure to follow these instructions can result in death

or fire.

REMEMBER: When range is in use or (on some models)

during the Self-Cleaning cycle, the entire cooktop area may

become hot.

A. Burner cap

B. Burner base

C. Alignment pins

D. Igniter

E. Gas tube opening

A. 1-1¹⁄₂" (25-38 mm)

B. Burner ports

4. Replace the burner cap, making sure the alignment pins are

properly aligned with the burner cap.

5. Turn on the burner. If the burner does not light, check cap

alignment. If the burner still does not light, do not service the

sealed burner yourself. Contact a trained repair specialist.

OVEN USE

Odors and smoke are normal when the oven is used the first few

times, or when it is heavily soiled.

IMPORTANT: The health of some birds is extremely sensitive to the

fumes given off. Exposure to the fumes may result in death to

certain birds. Always move birds to another closed and well-

ventilated room.

Electronic Oven Controls

Control Display

The display will flash when powered up or after a power loss. Press

CANCEL/OFF to clear. When oven is not in use, the time of day is

displayed. Indicator lights show functions that are in use.

Tone s

Tones are audible signals, indicating the following:

One tone

■ Valid pad press

■ Oven is preheated (long tone)

■ Function has been entered

■ Reminder (on some models), repeating each minute after the

end-of-cycle tones

Three tones

■ Invalid pad press

Four tones

■ End of cycle

To Change Tone Settings:

Tone Pitch

Sets the pitch of the tone to either high or low.

Press and hold BROIL for 5 seconds. “TONE PITCH HIGH” or

“TONE PITCH LOW” will appear in the display. Press and hold

BROIL again to change setting.

To exit, press CANCEL/OFF.

Key Press Tones

Activates or turns off the tones when a keypad is pressed.

Press and hold KEEP WARM for 5 seconds. “KEY PRESS TONES

ON” or “KEY PRESS TONES OFF” will appear in the display. Press

and hold KEEP WARM again to change setting.

To exit, press CANCEL/OFF.

End of Cycle Tone

Activates or turns off the tones that sound at the end of a cycle.

Press and hold CONVECT for 5 seconds. “CYCLE END TONE ON”

or “CYCLE END TONE OFF” will appear in the display. Press and

hold CONVECT again to change setting.

To exit, press CANCEL/OFF.

Reminder Tones Disable

Turns off the short tones that sound 1 minute after the end of cycle

tones.

Press and hold BAKE for 5 seconds. “REMINDER TONES ON” or

“REMINDER TONES OFF” will appear in the display. Press and

hold BAKE again to change setting.

To exit, press CANCEL/OFF.

Audible Tones Disable

Turns off all tones, including the end of cycle tone and key press

tones. Reminder tones are still active when all tones are disabled.

Press and hold CLOCK for 5 seconds. “ALL SOUNDS ON” or “ALL

SOUNDS OFF” will appear in the display. Press and hold CLOCK

again to change setting.

To exit, press CANCEL/OFF.

Fahrenheit and Celsius

The temperature is preset at Fahrenheit, but can be changed to

Celsius.

To change: Press and hold PRECISE CLEAN for 5 seconds. A tone

will sound, and “°C” or “°F” will appear on the display. Repeat to

change back.

To exit, press CANCEL/OFF.

12-Hour Shutoff

The oven control is set to automatically shut off the oven 12 hours

after the oven initiates a cook or clean function. This will not

interfere with any timed or delay cook functions.

Press and hold START TIME for 5 seconds to toggle to the 12-hour

shutoff function. Scrolling text will display “12 HR SHUT-OFF ON”

or “12 HR SHUT-OFF OFF.” Press and hold to change setting.

To exit, press CANCEL/OFF.

Oven Temperature Control

IMPORTANT: Do not use a thermometer to measure oven

temperature because opening the oven door may cause element

cycling to give incorrect readings.

The oven provides accurate temperatures; however, it may cook

faster or slower than your previous oven, so the temperature

calibration can be adjusted. It can be changed in Fahrenheit or

Celsius.

To Adjust Oven Temperature Calibration:

1. Press and hold OVEN LIGHT for 5 seconds until the oven

display shows the current calibration, for example “0°F.

2. Press the SET TEMP/TIME “+” or “-” arrow pads to increase or

to decrease the temperature in 5°F (3°C) amounts. The

adjustment can be set between 30°F (18°C) and -30°F (-18°C).

3. Press START.

A. Incorrect

B. Correct

12/24 Hour Clock

To change the clock mode, press and hold the “+” key for

5 seconds. Press and hold the “+” key again to change the setting.

Press START to confirm the change.

Scrolling Display Text

Language options are English or French.

Press the “-” key for 5 seconds to access options. Use the “-” key

to scroll through the options. Press the START key to confirm your

selection.

Sabbath Mode

The Sabbath Mode sets the oven to remain on in a bake setting

until turned off.

When the Sabbath Mode is set, all cooking and cleaning cycles are

disabled. Only the Bake cycle will operate in the Sabbath Mode. No

tones will sound, and the displays will not show messages or

temperature changes.

When the oven door is opened or closed, the oven light will not turn

on or off and the heating elements will not turn on or off

immediately.

To Enable Sabbath Mode (one time only):

1. Open oven door.

2. Press CANCEL/OFF.

3. Press and hold the “+” keypad for 5 seconds.

“SABBATH ON” and “PRESS START TO ENTER” will appear in

the display.

4. Press START to confirm your selection.

5. Close oven door.

To Activate Sabbath Mode:

To use the Warm Zone and/or Warm Drawer during Sabbath Mode,

press the WARM ZONE and /or WARM DRAWER keypad before

activating the Sabbath Mode.

1. Press BAKE.

2. Press the “+” or “-” key to set a temperature other than

350°F (177°C).

3. Press START.

For timed cooking in Sabbath Mode, press COOK TIME, then

the “+” or “-” keys to set the desired cook time.

4. Press TIMER SET/OFF for 5 seconds. “SAb” will appear in the

display.

To Adjust Temperature (when Sabbath Mode is running):

1. Press the “+” or “-” keypad. Each press of a keypad will

increase or decrease the temperature by 25°F (14°C). No

temperature will appear in the display.

2. Press START.

To Deactivate Sabbath Mode:

Press and hold TIMER SET/OFF for 5 seconds to return to regular

baking or press CANCEL/OFF to turn off the range.

Aluminum Foil

IMPORTANT: To avoid permanent damage to the oven bottom

finish, do not line the oven bottom with any type of foil, liners or

cookware.

For best cooking results, do not cover entire oven rack with foil

because air must be able to move freely.

Positioning Racks and Bakeware

IMPORTANT: To avoid permanent damage to the porcelain finish,

do not place food or bakeware directly on the oven door or bottom.

Bakeware

To cook food evenly, hot air must be able to circulate. Allow

2" (5 cm) of space around bakeware and oven walls. Make sure

that no bakeware piece is directly over another.

Racks

■ Position racks before turning on the oven.

■ Do not move racks with bakeware on them.

■ Make sure racks are level.

To move a rack, pull it out to the stop position, raise the front edge,

and then lift out. Use the following illustration and charts as a

guide.

Rack Positions

Rack 5: 2-rack baking.

Rack 4: Use for most broiling and toasting.

Rack 3: Most baked goods on a cookie sheet, jelly roll pan or in

muffin pans; layer cakes; casseroles; frozen convenience

foods. Broiling bone-in chicken pieces.

Rack 2: Roasting small cuts of meat and poultry. Large pan cakes,

pies, yeast breads, quick breads, and 2-rack baking.

Rack 1: Roasting large cuts of meat and poultry.

Rack 6: Roasting very large poultry.

Multiple Rack Cooking

3-rack: Use rack positions 1, 3 and 5 or 2, 3 and 5.

2-rack: Use rack positions 2 and 5.

Baking Layer Cakes on 2 Racks

For best results when baking cakes on 2 racks use racks 2 and 5.

Place the cakes on the racks as shown.

Oven Vent

The oven vent releases hot air and moisture from the oven, and

should not be blocked or covered. Blocking or covering the vent

will cause poor air circulation, affecting cooking and cleaning

results. Do not set plastics, paper or other items that could melt or

burn near the oven vent.

Baking and Roasting

ACCUBAKE

Temperature Management System

(on some models)

The ACCUBAKE

system electronically regulates the oven heat

levels during preheat and bake to maintain a precise temperature

range for optimal cooking results. The bake and broil elements or

burners cycle on and off in intervals. This feature is automatically

activated when the oven is in use.

Before baking and roasting, position racks according to

“Positioning Racks and Bakeware” section. When roasting, it is not

necessary to wait for the oven preheat cycle to end before putting

food in unless it is recommended in the recipe.

Preheating

When START is pressed, the oven will begin preheating. Once

170ºF (75ºC) is reached, the display temperature will increase as

the actual temperature of the oven increases. When the preheat

temperature is reached, a tone will sound, and the selected

temperature will appear on the display.

Broiling

Broiling uses direct radiant heat to cook food. Changing the

temperature when broiling allows more precise control when

cooking. The lower the temperature, the slower the cooking.

Thicker cuts and unevenly shaped pieces of meat, fish and poultry

may cook better at lower broiling temperatures.

■ For best results, use a broiler pan and grid. It is designed to

drain juices and help avoid spatter and smoke.

If you would like to purchase a broiler pan, one may be ordered.

Please refer to the cover for contact information. Ask for Part

Number 4396923.

Preheat the oven for 2 minutes before putting food in unless

recommended in the recipe. Position food on grid in a broiler pan,

then place it in the center of the oven rack. Close the door to

ensure proper broiling temperature.

Convection Cooking

During convection cooking, the bake burner cycles on and off in

intervals to maintain the oven temperature, while the fan circulates

the hot air.

If the oven door is opened during convection cooking, the fan will

turn off immediately. It will come back on when the oven door is

closed.

Convection cooking has 6 preset functions that can be selected by

repeatedly pressing the CONVECT keypad.

Convect Cook Functions

Rapid Preheat

Use Rapid Preheat to decrease preheating time when using Bake

or Convect Bake. Use for all foods when baking on 1 rack.

For best results, use rack position 3 when using Rapid Preheat

option.

For best baking and browning results, Rapid Preheat is not

recommended when baking on multiple racks.

To Use:

1. Select BAKE or CONVECT BAKE, and desired temperature.

2. Press START.

3. Press RAPID PREHEAT. Display will show “RAPID.”

When the preheat temperature is reached, a tone will sound, and

the selected temperature will appear on the display.

A. Oven vent (ceramic glass model)

Function Press CONVECT keypad

Convect Bake (default) 1 time

Convect Roast 2 times

Cookies 3 times

Turkey 4 times

Casserole 5 times

Frozen Pizza 6 times

Timed Cooking

To Set a Timed Cook:

1. Press BAKE, CONVECT or CONTROL BAKE (on some models).

2. Press the SET TEMP/TIME “+” or “-” arrow pads to enter a

temperature other than the one displayed.

3. Press COOK TIME. The cook time oven indicator light will light

up.

4. Press the SET TEMP/TIME “+” or “-” arrow pads to enter the

length of time to cook.

5. Press START. The display will count down the time. When the

time ends, the oven will shut off automatically.

6. Press OFF/CANCEL to clear the display.

To Set a Delayed Timed Cook:

Before setting, make sure the clock is set to the correct time of day.

See the “Clock” keypad feature in the “Feature Guide” section.

1. Press BAKE, CONVECT or CONTROL BAKE (on some models).

2. Press the SET TEMP/TIME “+” or “-” arrow pads to enter a

temperature other than the one displayed.

3. Press COOK TIME. The cook time oven indicator light will light

up.

4. Press SET TEMP/TIME “+” or “-” arrow pads to enter the length

of time to cook.

5. Press START TIME. The start time/delay oven indicator light will

light up.

6. Press SET TEMP/TIME “+” or “-” arrow pads to enter the time

of day to start.

7. Press START.

When the start time is reached, the oven will automatically turn on.

The temperature and/or time settings can be changed anytime

after pressing Start by repeating steps 1-7. When the set cook time

ends, the oven will shut off automatically.

8. Press OFF/CANCEL to clear the display.

Warming Drawer

(on some models)

The Warming Drawer is ideal for keeping hot cooked foods at

serving temperature. It may also be used for warming breads and

pastries.

Different types of food may be placed in the warming drawer at the

same time. For best results, do not hold foods longer than 1 hour.

For smaller quantities or heat-sensitive foods, such as eggs, do not

hold longer than 30 minutes.

Food must be at serving temperature before being placed in the

warming drawer. Breads, pastries, and fruit pies may be heated

from room temperature.

Remove food from plastic bags and place in oven-safe container.

Cover foods with a lid or aluminum foil.

Do not cover with plastic wrap.

Empty serving dishes and ovenproof dishes can be heated while

the warming drawer is preheating.

Before using the warming drawer, wash the bottom of the drawer

with soap and water. See “General Cleaning” section.

To Use:

1. Press WARM DRAWER ON/OFF.

“SET TEMP OR PUSH START” will appear on the display.

2. Press SET TEMP/TIME “+” or “-” keys to select a setting

between 1 (lowest) and 10 (highest)

Press START.

3. Allow the warming drawer to preheat for 15 minutes.

4. Place cooked food(s) in warming drawer.

5. Press WARM DRAWER ON/OFF when finished.

The Warming Drawer operates within a temperature range of 140ºF

to 180°F (60ºC to 82°C).

WARNING

Food Poisoning Hazard

Do not let food sit in oven more than one hour before

or after cooking.

Doing so can result in food poisoning or sickness.

WARNING

Food Poisoning Hazard

Do not let food sit for more than one hour before or

after cooking.

Doing so can result in food poisoning or sickness.

RANGE CARE

Self-Cleaning Cycle

(on some models)

IMPORTANT: The health of some birds is extremely sensitive to the

fumes given off during the Self-Cleaning cycle. Exposure to the

fumes may result in death to certain birds. Always move birds to

another closed and well-ventilated room.

Do not block the oven vent(s) during the Self-Cleaning cycle. Air

must be able to move freely. Depending on your model, see “Oven

Vent” section.

Do not clean, rub, damage or move the oven door gasket.

Prepare Range

■ Remove the broiler pan, grid, cookware and bakeware, all

cooking utensils, oven racks and aluminum foil and, on some

models, the temperature probe from the oven.

■ Use a damp cloth to clean inside door edge and the

1½" (3.8 cm) area around the inside oven cavity frame, being

certain not to move or bend the gasket.

■ Remove plastic items from the cooktop because they may

melt.

■ Remove all items from the storage drawer.

How the Cycle Works

IMPORTANT: The heating and cooling of porcelain on steel in the

oven may result in discoloring, loss of gloss, hairline cracks and

popping sounds.

Before self-cleaning, make sure the door is completely closed or

the door will not lock and the self-cleaning cycle will not begin.

Once the oven has completely cooled, remove ash with a damp

cloth. To avoid breaking the glass, do not apply a cool damp cloth

to the inner door glass before it has completely cooled.

To stop the self-cleaning cycle at anytime, press CANCEL/OFF. If

the temperature is too high the oven door will remain locked and

“cool” and “locked” will be displayed.

Once the cleaning temperature has been reached, the electronic

control requires a 12-hour delay before another self-clean cycle

can be started.

The oven light will not function during the self-cleaning cycle.

Electronic Oven Control with Precise Clean™ Feature (on

some models)

The Precise Clean™ self-cleaning cycle is a “one-touch” step that

uses very high temperatures and dissolves soil to a powdery ash.

The Precise Clean™ feature will automatically determine the length

of cleaning time needed based on the number of times the oven

has been used since the last self-cleaning cycle. The maximum

clean time is 4 hours and the minimum clean time is 2 hours.

To Self-Clean:

1. Press PRECISE CLEAN. “PRECISE CLEAN REMOVE RACKS

SET CLEAN TIME OR PUSH START” will scroll in the display.

2. Press START.

The oven door will automatically lock. “LOCKING” and the stop

time will appear in the display. The remaining clean time will

also be displayed.

3. When the self-clean cycle is complete and the oven cools,

“UNLOCKING” will appear in the display. Press any keypad or

open the oven door to clear the display.

4. When the oven is completely cooled, remove ash with a damp

cloth.

WARNING

Burn Hazard

Do not touch the oven during the Self-Cleaning cycle.

Keep children away from oven during

Self-Cleaning cycle.

Failure to follow these instructions can result in burns.

General Cleaning

IMPORTANT: Before cleaning, make sure all controls are off and

the oven and cooktop are cool. Always follow label instructions on

cleaning products. For additional information, you can visit the

Customer Service section of our website at www.whirlpool.ca.

Soap, water and a soft cloth or sponge are suggested first unless

otherwise noted.

EXTERIOR PORCELAIN ENAMEL SURFACES (on some

models)

Food spills containing acids, such as vinegar and tomato, should

be cleaned as soon as the entire range is cool. These spills may

affect the finish.

Cleaning Method:

■ Glass cleaner, mild liquid cleaner or nonabrasive scrubbing

pad:

Gently clean around the model and serial number plate

because scrubbing may remove numbers.

■ All-Purpose Appliance Cleaner Part Number 31682B (not

included):

See cover for contact information.

STAINLESS STEEL (on some models)

NOTE: To avoid damage to stainless steel surfaces, do not use

soap-filled scouring pads, abrasive cleaners, Cooktop Cleaner,

steel-wool pads, gritty washcloths or abrasive paper towels.

Damage may occur to stainless steel surfaces, even with one-time

or limited use.

Cleaning Method:

Rub in direction of grain to avoid damaging.

■ Stainless Steel Cleaner and Polish Part Number 31462B:

See cover for contact information.

Liquid detergent or all-purpose cleaner:

Rinse with clean water and dry with soft, lint-free cloth.

METALLIC PAINT (on some models)

Do not use abrasive cleaners, cleaners with bleach, rust removers,

ammonia or sodium hydroxide (lye) because paint surface may

stain.

PORCELAIN-COATED GRATES AND CAPS

Food spills containing acids, such as vinegar and tomato, should

be cleaned as soon as the cooktop, grates and caps are cool.

These spills may affect the finish.

To avoid chipping, do not bang grates and caps against each other

or hard surfaces such as cast iron cookware.

Do not reassemble caps on burners while wet.

Do not clean in the Self-Cleaning cycle.

Cleaning Method:

■ Nonabrasive plastic scrubbing pad and mildly abrasive

cleanser:

Clean as soon as cooktop, grates and caps are cool.

■ Dishwasher (grates only, not caps):

Use the most aggressive cycle. Cooked-on soils should be

soaked or scrubbed before going into a dishwasher.

■ Gas Grate and Drip Pan Cleaner Part Number 31617B:

See cover for contact information.

SURFACE BURNERS

■ See “Sealed Surface Burners” section.

COOKTOP CONTROLS

To avoid damage to the cooktop controls, do not use steel wool,

abrasive cleansers or oven cleaner.

Do not soak knobs. When replacing knobs, make sure knobs are in

the OFF position.

On some models, do not remove seals under knobs.

Cleaning Method:

■ Soap and water:

Pull knobs straight away from control panel to remove.

CONTROL PANEL AND OVEN DOOR EXTERIOR

To avoid damage to the control panel, do not use abrasive

cleaners, steel-wool pads, gritty washcloths or abrasive paper

towels.

Cleaning Method:

■ Glass cleaner and soft cloth or sponge:

Apply glass cleaner to soft cloth or sponge, not directly on

panel.

■ All-Purpose Appliance Cleaner Part Number 31682B (not

included):

See cover for contact information.

OVEN RACKS

Cleaning Method:

■ Steel-wool pad

■ For racks that have discolored and are harder to slide, a light

coating of vegetable oil applied to the rack guides will help

them slide.

STORAGE DRAWER

Check that storage drawer is cool and empty before cleaning.

Cleaning Method:

■ Mild detergent

Oven Light

The oven light is a standard 40-watt appliance bulb. Before

replacing, make sure the oven and cooktop are cool and the

control knobs are in the off position.

To Replace:

1. Unplug range or disconnect power.

2. Turn the glass bulb cover in the back of the oven

counterclockwise to remove.

3. Turn bulb counterclockwise to remove from socket.

4. Replace bulb, then bulb cover by turning clockwise.

5. Plug in range or reconnect power.

TROUBLESHOOTING

First try the solutions suggested here or visit our website and reference the Customer Service section to possibly avoid the cost

of a service call.

www.whirlpool.ca

Nothing will operate

■ Is the power supply cord unplugged?

Plug into a grounded 3 prong outlet.

■ Household fuse blown or circuit breaker tripped?

Replace the fuse or reset the circuit breaker. If the problem

continues, call an electrician.

■ Is the main or regulator gas shutoff valve in the off

position?

See Installation Instructions.

■ Is the range properly connected to the gas supply?

Contact a trained repair specialist or see Installation

Instructions.

Surface burners will not operate

■ Is the oven in self-clean?

Surface burners will not operate during self-clean cycle.

■ Is the control knob set correctly?

Push in knob before turning to a setting.

■ Is this the first time the surface burners have been used?

Turn on any one of the surface burner knobs to release air from

the gas lines.

■ Are the burner ports clogged?

See “Sealed Surface Burners” section.

Surface burner flames are uneven, yellow and/or noisy

■ Are the burner ports clogged?

See “Sealed Surface Burners” section.

■ On models with caps, are the burner caps positioned

properly?

See “Sealed Surface Burners” section.

■ Is propane gas being used?

The range may have been converted improperly. Contact a

service technician or see cover for contact information.

Surface burner makes popping noises

■ Is the burner wet?

Let it dry.

Gas range noises during Bake and Broil operations

Noises that may be heard during the Bake and Broil operations:

Whooshing, Poof, Clicking, Snaps, Pop

These sounds are normal operational noises that can be heard

each time the Bake or Broil burners ignite during the cycle.

■ A pop can be heard when the gas valve is opening or cycling

on and will make a single pop when it snaps open from the

solenoid. It sounds similar to a suction cup being pulled off of a

piece of glass.

■ The igniters will click several times until the flame is detected.

These are short clicking sounds like tapping a nail onto a piece

of glass.

■ A whooshing or poof sound is heard when the Bake or Broil

burner ignites.

■ On some models, a clicking sound can be heard when the

convection fan relay cycles on and off.

Excessive heat around cookware on cooktop

■ Is the cookware the proper size?

Use cookware about the same size as the surface cooking

area, element or surface burner. Cookware should not extend

more than ½" (1.3 cm) outside the cooking area.

Cooktop cooking results not what expected

■ Is the proper cookware being used?

Ideal cookware should have a flat bottom, straight sides and a

well fitting lid, and the material should be of a medium to heavy

thickness.

■ Is the control knob set to the proper heat level?

See “Cooktop Use” section.

■ Is the range level?

Level the range. See the Installation Instructions.

Oven will not operate

■ Is this the first time the oven has been used?

Turn on any one of the surface burner knobs to release air from

the gas lines.

■ Is the electronic oven control set correctly?

See “Electronic Oven Controls” section.

Oven burner flames are yellow or noisy

■ Is propane gas being used?

The range may have been converted improperly. Contact a

service technician or see cover for contact information.

Oven temperature too high or too low

■ Does the oven temperature calibration need adjustment?

See “Oven Temperature Control” section of the “Electronic

Oven Controls” section.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

WARNING

Display shows messages

■ Is the display showing a flashing time?

There has been a power failure. Clear the display. On some

models, reset the clock, if needed. See “Clock” keypad feature

in the “Feature Guide” section.

■ Is the display showing a letter followed by a number?

Depending on your model, press OFF/CANCEL or CANCEL/

OFF to clear the display. See “Control Display” in the

“Electronic Oven Controls” section. If it reappears, call for

service. See cover for contact information.

■ Is the display showing a flashing “PUSH?” or “PSH”?

See the “Start” keypad feature in the “Feature Guide” section.

Self-Cleaning cycle will not operate

■ Is the oven door open?

Close the oven door all the way.

■ Has the function been entered?

See “Self-Cleaning Cycle” section.

■ Has a delay start been set? (on some models)

See “Timed Cooking” section.

■ Has a self-clean cycle been run in the past 12 hours?

If a self-clean cycle has been run, or canceled after the oven

has reached temperature, you will have to wait 12 hours to

restart.

Oven cooking results not what expected

■ Is the range level?

Level the range. See the Installation Instructions.

■ Is the proper temperature set?

Double-check the recipe in a reliable cookbook.

■ Is the proper oven temperature calibration set?

See “Oven Temperature Control” section of the “Electronic

Oven Controls” section.

■ Was the oven preheated?

See “Baking and Roasting” section.

■ Are the racks positioned properly?

See “Positioning Racks and Bakeware” section.

■ Is there proper air circulation around bakeware?

See “Positioning Racks and Bakeware” section.

■ Is the batter evenly distributed in the pan?

Check that batter is level in the pan.

■ Is the proper length of time being used?

Adjust cooking time.

■ Has the oven door been opened while cooking?

Oven peeking releases oven heat and can result in longer

cooking times.

■ Are baked items too brown on the bottom?

Move rack to higher position in the oven.

■ Are pie crust edges browning early?

Use aluminum foil to cover the edge of the crust and/or reduce

baking temperature.

ACCESSORIES

Stainless Steel Cleaner and Polish

(stainless steel models)

Order Part Number 31462B

All-Purpose Appliance Cleaner

Order Part Number 31682B

Gas Grate and Drip Pan Cleaner

Order Part Number 31617B

Split-Rack with Removable Insert

Order Part Number 4396927

Broiler Pan

Order Part Number 4396923

WHIRLPOOL CORPORATION MAJOR APPLIANCE WARRANTY

LIMITED WARRANTY

For one year from the date of purchase, when this major appliance is operated and maintained according to instructions attached to or

furnished with the product, Whirlpool Corporation or Whirlpool Canada LP (hereafter “Whirlpool”) will pay for Factory Specified Parts and

repair labor to correct defects in materials or workmanship. Service must be provided by a Whirlpool designated service company. This

limited warranty is valid only in the United States or Canada and applies only when the major appliance is used in the country in which it

was purchased. Outside the 50 United States and Canada, this limited warranty does not apply. Proof of original purchase date is required

to obtain service under this limited warranty.

ITEMS EXCLUDED FROM WARRANTY

This limited warranty does not cover:

1. Service calls to correct the installation of your major appliance, to instruct you on how to use your major appliance, to replace or repair

house fuses, or to correct house wiring or plumbing.

2. Service calls to repair or replace appliance light bulbs, air filters or water filters. Consumable parts are excluded from warranty

coverage.

3. Repairs when your major appliance is used for other than normal, single-family household use or when it is used in a manner that is

contrary to published user or operator instructions and/or installation instructions.

4. Damage resulting from accident, alteration, misuse, abuse, fire, flood, acts of God, improper installation, installation not in accordance

with electrical or plumbing codes, or use of consumables or cleaning products not approved by Whirlpool.

5. Cosmetic damage, including scratches, dents, chips or other damage to the finish of your major appliance, unless such damage

results from defects in materials or workmanship and is reported to Whirlpool within 30 days from the date of purchase.

6. Any food loss due to refrigerator or freezer product failures.

7. Costs associated with the removal from your home of your major appliance for repairs. This major appliance is designed to be

repaired in the home and only in-home service is covered by this warranty.

8. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.

9. Expenses for travel and transportation for product service if your major appliance is located in a remote area where service by an

authorized Whirlpool servicer is not available.

10. The removal and reinstallation of your major appliance if it is installed in an inaccessible location or is not installed in accordance with

published installation instructions.

11. Major appliances with original model/serial numbers that have been removed, altered or cannot be easily determined. This warranty is

void if the factory applied serial number has been altered or removed from your major appliance.

The cost of repair or replacement under these excluded circumstances shall be borne by the customer.

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES

CUSTOMER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED

HEREIN. IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,

ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. WHIRLPOOL SHALL NOT BE LIABLE FOR INCIDENTAL

OR CONSEQUENTIAL DAMAGES. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL

OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES OF MERCHANTABILITY OR

FITNESS, SO THESE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL

RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.

If outside the 50 United States and Canada, contact your authorized Whirlpool dealer to determine if another warranty applies. 9/07

For additional product information, visit www.whirlpool.ca

If you do not have access to the Internet and you need assistance using your product or you would like to schedule service, you may

contact Whirlpool at the number below.

Have your complete model number ready. You can find your model number and serial number on the label, located on the oven frame

behind the storage drawer panel.

For assistance or service call 1-800-807-6777.

If you need further assistance, you can write to Whirlpool with any questions or concerns at the address below:

Whirlpool Brand Home Appliances

Customer eXperience Centre

1901 Minnesota Court

Mississauga, Ontario L5N 3A7

Please include a daytime phone number in your correspondence.

Please keep this User Instructions and model number information for future reference.

MERCI d'avoir acheté ce produit de grande qualité. Si vous rencontrez un problème non abordé à la section DÉPANNAGE, veuillez

visiter notre site Web à www.whirlpool.ca pour obtenir des informations supplémentaires. Si vous avez toujours besoin d'aide,

composez le 1-800-807-6777.

Vous devrez connaître les numéros de modèle et de série qui se trouvent sur le châssis du four, derrière le panneau du tiroir de

remisage.

INSTRUCTIONS D'UTILISATION

DE LA CUISINIÈRE À GAZ

Table des matières

SÉCURITÉ DE LA CUISINIÈRE............................................................ 17

La bride antibasculement................................................................... 18

GUIDE DES CARACTÉRISTIQUES ..................................................... 19

UTILISATION DE LA TABLE DE CUISSON ........................................ 21

Brûleurs de surface scellés ................................................................ 21

UTILISATION DU FOUR ....................................................................... 22

Commandes électroniques du four ................................................... 22

Mode Sabbat...................................................................................... 23

Papier d’aluminium............................................................................. 23

Positionnement des grilles et des ustensiles de cuisson.................. 23

Évent du four ...................................................................................... 24

Cuisson au four et rôtissage .............................................................. 24

Cuisson au gril.................................................................................... 24

Cuisson par convection ..................................................................... 25

Préchauffage rapide........................................................................... 25

Cuisson minutée................................................................................. 25

Tiroir-réchaud (sur certains modèles) ................................................ 26

ENTRETIEN DE LA CUISINIÈRE ......................................................... 26

Programme d’autonettoyage (sur certains modèles) ........................ 26

Nettoyage général .............................................................................. 27

Lampe du four .................................................................................... 28

DÉPANNAGE......................................................................................... 28

ACCESSOIRES...................................................................................... 30

GARANTIE ............................................................................................. 30

SÉCURITÉ DE LA CUISINIÈRE

Risque possible de décès ou de blessure grave si vous ne

suivez pas immédiatement les instructions.

Risque possible de décès ou de blessure grave si vous

ne suivez pas les instructions.

Tous les messages de sécurité vous diront quel est le danger potentiel et vous disent comment réduire le risque de blessure et

ce qui peut se produire en cas de non-respect des instructions.

Votre sécurité et celle des autres est très importante.

Nous donnons de nombreux messages de sécurité importants dans ce manuel et sur votre appareil ménager. Assurez-vous de

toujours lire tous les messages de sécurité et de vous y conformer.

AVERTISSEMENT

DANGER

Voici le symbole d’alerte de sécurité.

Ce symbole d’alerte de sécurité vous signale les dangers potentiels de décès et de blessures graves à vous

et à d’autres.

Tous les messages de sécurité suivront le symbole d’alerte de sécurité et le mot “DANGER” ou

“AVERTISSEMENT”. Ces mots signifient :

AVERTISSEMENT : Si les renseignements dans ce manuel ne sont pas exactement

observés, un incendie ou une explosion peut survenir, causant des dommages au

produit, des blessures ou un décès.

– Ne pas entreposer ni utiliser de l’essence ou d’autres vapeurs ou liquides inflammables

à proximité de cet appareil ou de tout autre appareil électroménager.

– QUE FAIRE DANS LE CAS D’UNE ODEUR DE GAZ :

•

Ne pas tenter d’allumer un appareil.

•

Ne pas toucher à un commutateur électrique.

•

Ne pas utiliser le téléphone se trouvant sur les lieux.

•

Appeler immédiatement le fournisseur de gaz à partir du téléphone d'un voisin. Suivre

ses instructions.

•

À défaut de joindre votre fournisseur de gaz, appeler les pompiers.

– L’installation et l’entretien doivent être effectués par un installateur qualifié, une agence

de service ou le fournisseur de gaz.

AVERTISSEMENT : L’odorat ne permet pas toujours la détection d’une fuite de gaz.

Les distributeurs de gaz recommandent l’emploi d’un détecteur de gaz (homologation UL ou CSA).

Pour d’autre information, contacter le fournisseur de gaz local.

En cas de détection d’une fuite de gaz, exécuter les instructions “Que faire dans le cas d’une odeur de gaz”.

Avertissements de la proposition 65 de l'État de Californie :

AVERTISSEMENT : Ce produit contient un produit chimique connu par l’État de Californie pour être à l’origine de cancers.

AVERTISSEMENT : Ce produit contient un produit chimique connu par l’État de Californie pour être à l’origine de malformations

et autres déficiences de naissance.

La bride antibasculement

Dans des conditions de service normales, la cuisinière ne bascule pas. Elle peut cependant basculer si une force ou un poids excessif est

appliqué sur la porte ouverte alors que la bride antibasculement n’est pas convenablement fixée.

Risque de basculement

Un enfant ou une personne adulte peut faire basculer la cuisinière ce qui peut causer un décès.

Joindre la bride antibasculement au pied arrière de la cuisinière.

Joindre de nouveau la bride antibasculement si la cuisinière est déplacée.

Voir détails dans les instructions d'installation.

Le non-respect de ces instructions peut causer un décès ou des brûlures graves aux enfants et

aux adultes.

La bride antibasculement

Assurez-vous qu'une bride antibasculement est installée :

• Glisser la cuisinière vers l'avant.

• Vérifier que la bride antibasculement est bien fixée au plancher.

• Glisser de nouveau la cuisinière vers l'arrière de sorte que le pied est sous la bride

antibasculement.

Le pied de la cuisinière

AVERTISSEMENT

IMPORTANTES INSTRUCTIONS DE SÉCURITÉ

CONSERVEZ CES INSTRUCTIONS

AVERTISSEMENT : Pour réduire le risque d’incendie, de

choc électrique, de blessures ou de dommages lors de

l’utilisation de la cuisinière, il convient d’observer certaines

précautions élémentaires dont les suivantes :

■ AVERTISSEMENT : POUR MINIMISER LE RISQUE DE

BASCULEMENT DE LA CUISINIÈRE, ELLE DOIT ÊTRE

BIEN IMMOBILISÉE PAR DES DISPOSITIFS

ANTIBASCULEMENT CORRECTEMENT INSTALLÉS.

POUR VÉRIFIER SI LES DISPOSITIFS SONT

CORRECTEMENT INSTALLÉS, GLISSER LA CUISINIÈRE

VERS L’AVANT ET VÉRIFIER SI LA BRIDE

ANTIBASCULEMENT EST BIEN FIXÉE AU PLANCHER, ET

GLISSER LA CUISINIÈRE VERS L’ARRIÈRE POUR QUE LE

PIED ARRIÈRE DE LA CUISINIÈRE SOIT SOUS LA BRIDE

ANTIBASCULEMENT.

■ AVERTISSEMENT : NE JAMAIS utiliser cet appareil

comme dispositif de chauffage de la pièce. Le non-respect

de cette instruction peut entraîner une intoxication au

monoxyde de carbone et une surchauffe du four.

■ AVERTISSEMENT : NE JAMAIS couvrir les fentes,

trous ou passages d'air au fond du four ou couvrir

entièrement une grille avec des matériaux tels que du

papier d'aluminium. Le non-respect de cette instruction

empêche la circulation de l'air dans le four et peut entraîner

une intoxication au monoxyde de carbone. Les feuilles de

papier d'aluminium peuvent également retenir la chaleur et

créer un risque d'incendie.

■ MISE EN GARDE : Ne pas remiser dans des armoires

au-dessus de la cuisinière ou sur le dosseret d’une

cuisinière, des objets que des enfants pourraient vouloir

atteindre. Les enfants pourraient se brûler ou se blesser en

grimpant sur la cuisinière.

■ Installation appropriée – La cuisinière, lorsqu’elle est

correctement installée, doit être reliée à la terre

conformément aux codes électriques locaux ou en

l’absence de codes locaux, selon le Code électrique national

(US) ANSI/NFPA 70 ou le Code canadien des installations,

Partie 1. S’assurer que la cuisinière est correctement

installée et reliée à la terre par un technicien qualifié.

■ Cette cuisinière est munie d’une fiche de liaison à la terre à

trois broches pour votre protection contre les risques de

choc électrique et doit être branchée directement dans une

prise de courant bien reliée à la terre. Ne pas couper ni

enlever la broche de liaison à la terre de cette fiche.

■ Déconnecter la source de courant électrique avant

l'entretien.

■ Des blessures peuvent survenir d’un mauvais usage des

portes ou des tiroirs de l’appareil tel que se tenir debout sur

la surface, se pencher ou s’asseoir sur les portes ou tiroirs.

■ Entretien – Garder l’espace autour de la cuisinière dégagé

et libre de matériaux combustibles, d’essence et d’autres

vapeurs et liquides inflammables.

■ Remisage dans ou sur la cuisinière – Des produits

inflammables ne devraient pas être remisés dans un four ou

près des éléments de surface.

■ La taille de la flamme des brûleurs de surface devrait être

ajustée de sorte qu’elle ne dépasse pas le bord de

l’ustensile de cuisson.

Cuisinière autonettoyante –

■ Avant l’autonettoyage du four – Ôter la lèchefrite et son plat

et les autres ustensiles. Essuyer tous les renversements

excessifs avant de mettre en marche le programme

d’autonettoyage.

GUIDE DES CARACTÉRISTIQUES

Ce manuel couvre différents modèles. Le modèle que vous avez peut comporter toutes les caractéristiques énumérées ou seulement

certaines d'entre elles. Se reporter à ce manuel ou à la section Service à clientèle de notre site Web à www.whirlpool.ca pour des

instructions plus détaillées.

AVERTISSEMENT

Risque d'empoisonnement alimentaire

Ne pas laisser des aliments dans un four plus d'une

heure avant ou après la cuisson.

Le non-respect de cette instruction peut causer un

empoisonnement alimentaire ou une maladie.

CLAVIER CARACTÉRISTIQUE INSTRUCTIONS

OVEN LIGHT

(lampe du four)

Lampe de la cavité

du four

Alors que la porte du four est fermée, appuyer sur l'interrupteur de la lampe du four pour

allumer ou éteindre la lampe. La lampe du four s'allume à l'ouverture de la porte. La lampe du

four ne s’allume pas durant le programme d’autonettoyage.

PRECISE

CLEAN

(nettoyage de

précision)

Programme

d'autonettoyage

Voir la section “Entretien de la cuisinière”.

CLOCK

(horloge)

Horloge Cette horloge peut utiliser un programme de 12 ou 24 heures. Voir la section “Utilisation du

four”.

1. Vérifier que le four et la minuterie sont éteints.

2. Appuyer sur CLOCK (horloge).

3. Appuyer sur les touches à flèche SET TEMP/TIME “+” ou “-” (réglage température/heure)

pour régler l'heure.

4. Appuyer sur START (mise en marche).

TIMER

SET/OFF

(minuterie

réglage/arrêt)

Minuterie du four La minuterie peut être réglée en heures ou en minutes jusqu’à concurrence de 9 heures et

59 minutes.

1. Appuyer sur TIMER SET/OFF (réglage/arrêt de la minuterie).

2. Appuyer sur les touches à flèche SET TEMP/TIME “+” ou “-” (réglage température/heure)

pour régler la durée de cuisson.

3. Appuyer sur START (mise en marche) pour démarrer le compte à rebours. Si activés, les

signaux sonores de fin de programme retentissent à la fin du compte à rebours.

4. Appuyer sur TIMER SET/OFF (réglage/arrêt de la minuterie) deux fois pour annuler la

minuterie. Ne pas appuyer sur la touche CANCEL/OFF (annulation/arrêt) sinon le four

s’éteindra.

5. Si la minuterie est activée mais n'apparaît pas sur l’affichage, appuyer sur TIMER SET/

OFF (réglage/arrêt de la minuterie) pour faire apparaître le compte à rebours pendant

5 secondes.

WARM

DRAWER

(tiroir

rêchauffe-plat)

ON/OFF (activé/

désactivé)

Tiroir-réchaud

(sur certains

modèles)

Appuyer sur WARM DRAWER ON/OFF (tiroir-réchaud activé/désactivé) pour sélectionner la

fonction de tiroir-réchaud.

Appuyer sur WARM DRAWER ON/OFF (tiroir-réchaud activé/désactivé) pour éteindre

l'élément chauffant. Voir la section “Tiroir-réchaud”.

CONTROL

LOCK HOLD

3 SEC.

(verrouillage

des

commandes

appuyer

pendant 3 sec)

Verrouillage des

commandes du four

Aucune touche du clavier ne fonctionne lorsque les commandes sont verrouillées.

1. Vérifier que le four et la minuterie sont éteints.

2. Appuyer sur la touche CONTROL LOCK pendant 3 secondes.

3. Si elle est activée, un signal sonore se fait entendre et “CONTROL LOCKED” s'affiche.

4. Répéter pour déverrouiller.

BAKE

(cuisson au

four)

Cuisson au four et

rôtissage

1. Appuyer sur BAKE (cuisson au four).

2. Appuyer sur les touches à flèche SET TEMP/TIME “+” ou “-” pour régler une température

autre que 350°F (175°C) par tranches de 5°, entre 170°F et 550°F (75°C et 288°C).

3. Appuyer sur START (mise en marche).

4. Pour modifier la température, répéter les étapes 1 et 2. Appuyer sur START (mise en

marche) ou attendre pendant 5 secondes pour que le changement puisse s’effectuer.

5. Appuyer sur CANCEL/OFF (annulation/arrêt) après avoir terminé.

BROIL

(cuisson au gril)

Cuisson au gril 1. Positionner l'ustensile à l'intérieur du four et fermer la porte du four.

2. Appuyer sur BROIL (cuisson au gril).

3. Appuyer sur les touches à flèche SET TEMP/TIME “+” ou “-” pour régler une température

autre que 550°F (285°C) par tranches de 5°, entre 170°F et 550°F (75°C et 288°C).

4. Appuyer sur START (mise en marche).

5. Appuyer sur CANCEL/OFF (annulation/arrêt) après avoir terminé.

CONVECT

(cuisson par

convection)

Cuisson par

convection

Voir la section “Cuisson par convection” pour les préréglages des options de cuisson par

convection.

1. Appuyer sur CONVECT (cuisson par convection).

2. Appuyer de nouveau sur CONVECT (cuisson par convection) pour accéder aux options.

3. Appuyer sur les touches à flèche SET TEMP/TIME “+” ou “-” pour régler une température

autre que 325°F (162°C) par tranches de 5°, entre 170°F et 550°F (75°C et 288°C).

4. Appuyer sur START (mise en marche).

5. Pour modifier la température, répéter les étapes 1 et 2. Appuyer sur START (mise en

marche) ou attendre pendant 5 secondes pour que le changement puisse s’effectuer.

6. Appuyer sur CANCEL/OFF (annulation/arrêt) après avoir terminé.

RAPID

PREHEAT

(préchauffage

rapide)

Température de

préchauffage

Si désiré, appuyer sur RAPID PREHEAT (préchauffage rapide) lorsque l'on utilise les

fonctions Bake ou Convect (cuisson au four, cuisson au four contrôlée ou cuisson par

convection) pour un préchauffage plus rapide de la cavité du four. Voir la section

“Préchauffage rapide”.

KEEP WARM

(garder au

chaud)

Maintien au chaud Les aliments doivent être à la température de service avant d'être placés dans le four chauffé.

1. Appuyer sur KEEP WARM (maintien au chaud).

2. Appuyer sur les touches à flèche SET TEMP/TIME “+” ou “-” pour régler la température

entre 145°F (63°C) et 190°F (88°C). La température par défaut est de 170°F (75°C).

3. Appuyer sur START (mise en marche).

4. Appuyer sur CANCEL/OFF (annulation/arrêt) après avoir terminé.

COOK TIME

(durée de

cuisson)

Cuisson minutée La cuisson minutée permet d’allumer le four à une certaine heure de la journée, d'effectuer

une cuisson pendant une durée réglée et/ou d’éteindre le four automatiquement. La mise en

marche différée ne doit pas être utilisée pour les aliments tels que pains et gâteaux car ils

risquent de ne pas bien cuire.

Pour régler une cuisson minutée ou une cuisson minutée différée, voir la section “Cuisson

minutée”.

START TIME

(heure de mise

en marche)

Mise en marche

différée

La touche de l'heure de mise en marche sert à entrer l'heure de mise en marche pour un four

équipé de mise en marche différée.

SET

TEMP/TIME

(réglage

température/

durée)

Réglage de

température et durée

Les touches à flèche “+” ou “-” servent à régler la durée et la température.

START (mise en

marche)

Mise en marche de

la cuisson

La touche Start active toutes les fonctions du four. Si, après avoir appuyé sur une touche, on

n'appuie pas sur Start dans 30 secondes qui suit, la fonction est annulée et l'heure s'affiche.

CANCEL/OFF

(annulation/

arrêt)

Fonction de la

cuisinière

La touche Cancel/Off (annulation/arrêt) désactive toutes les fonctions à l'exception de

l'horloge, de la minuterie et du verrouillage des commandes du four.

CLAVIER CARACTÉRISTIQUE INSTRUCTIONS

La page est en cours de chargement...

Bauknecht GFG461LV Manuel utilisateur

Marque: Bauknecht

Modèle: GFG461LV

Catégorie: Cuisinières

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: Bauknecht GFG461LV User manual

Bauknecht GFG461LV Manuel utilisateur

Bauknecht GFG461LV Manuel utilisateur

dans d''autres langues

Autres documents