LG Tone Free Bluetooth Stereo Headset Manuel utilisateur

HBS-FN7

USER MANUAL

Bluetooth® LG Stereo Headset

English

Čeština

Français

Deutsch

Slovensky

Español

Italiano

Magyar

Nederlands

Polski

Google Play App Store

Rev 2.0 EU

www.lg.com

Contact ofce for compliance of this product :

LG Electronics Inc.

EU Representative, Krijgsman 1, 1186 DM Amstelveen, The Netherlands

Using LG TONE Free™

Použití LG TONE Free™

Utilisation du LG TONE Free™

LG TONE Free™ verwenden

Az LG TONE Free™ használata

Utilizzo di LG TONE Free™

LG TONE Free™ gebruiken

Używanie LG TONE Free™

Uso de LG TONE Free™

Používanie slúchadiel LG TONE Free™

ENGLISH

Using LG TONE Free™

1

NOTE: For the best performance and to prevent any damage to, or misuse of the headset,

please read all of the information carefully prior to using the headset.

Any modications or changes to this manual due to typographical errors or inaccuracies of

stated information shall only be made by LG Electronics Inc.

The LG TONE Free (HBS-FN7) is a lightweight wireless headset that uses Bluetooth technology.

This product can be used as an audio accessory for devices supporting either the A2DP or

Hands-Free Bluetooth Prole.

Safety Precautions

The following safety precautions are provided to prevent any unexpected accident or

damage. Please familiarize yourself with the safety precautions.

The safety precautions are classied into “WARNING” and “CAUTION”.

!

WARNING: Failing to comply with the instructions may result in serious injury or death.

!

CAUTION: Failing to comply with the instructions may result in minor injury or product

damage.

!

WARNING

Do not drop the product from a high place.

Make sure there is no water, alcohol, or benzene in contact with the product.

Do not store the product in a wet or dusty place.

Do not place heavy objects on the product.

This product is waterproof to the IPX4 level (daily life waterproof).

(The IPX4 waterproof rating applies to the earbud product only.)

Do not put the product under the water or use it in a humid location such as a bathroom.

2

!

CAUTION

Do not disassemble, adjust, or repair the product arbitrarily.

Do not place the product near excessive heat or ammable material.

The product may be damaged if an incompatible charger is used.

Make sure that an infant or child does not swallow a magnet or a small component of

the product.

Make sure that foreign objects do not enter the charger’s connectors (charging port

and power plug). Failure to do so may result in re or electric shock.

If you have a medical device implanted, contact your doctor before using this device.

This product has a built-in battery, and the battery cannot be removed or replaced

arbitrarily.

For your safety, do not remove the battery incorporated in the product.

If you arbitrarily replace the battery or don’t replace it correctly, it may explode.

The lithium-ion battery is a hazardous component that can cause injury.

Battery replacement by an unqualied professional can cause damage to your device.

Do not replace the battery by yourself. The battery can be damaged, which can cause

overheat and injury. The battery must be replaced by authorized service provider. The

battery should be recycled or disposed separately from household wastes.

Do not discard the battery arbitrarily. Follow the local procedure for discarding

batteries.

In order to prevent unnecessary energy consumption, disconnect the device when fully

charged. Always use an easily accessible power outlet for charging your device.

Risk of re or explosion if the battery is replaced by an incorrect type.

Do not store or transport at pressures lower than 11.6 kPa and at above 15000 m

altitude.

3

Replacement of a battery with an incorrect type that can defeat a safeguard (for

example, in the case of some lithium battery types).

Disposal of a battery into re or a hot oven, or mechanically crushing or cutting of a

battery, that can result in an explosion.

Leaving a battery in an extremely high temperature surrounding environment that can

result in an explosion or the leakage of ammable liquid or gas.

A battery subjected to extremely low air pressure that may result in an explosion or

the leakage of ammable liquid or gas.

Do not carelessly throw away old batteries. It can cause an explosion or re. The

disposal method may vary by country and region. Dispose of it in an appropriate

manner.

NOTE

If the product is exposed to excessive sweat, clean the product.

Keep the earbuds clean.

HD Speaker

If the communication network of the device you are connecting to supports HD Voice

Calling, you can enjoy making voice calls and listening to music in high denition.

4

Product Components

LG TONE Free™

Earbuds (medium eargels

installed)

UV Charging Case

Extra Ear Gels

(small & large)

USB Type C™ Charging Cable

Reference guide User Manual WEEE Card (Europe Only)

NOTE: Actual product design may differ from images shown in manual.

Make sure authentic LG Electronics components are used. Using a non-authentic

component may damage the product and thus void the warranty.

Use the USB Type C™ cable provided with the product.

!

CAUTION

5

Overview

Charging Case

Earbuds

*The appearance and specications of the actual product may differ depending on the model.

Pairing / Battery check button

Charging port

Charging terminals

UVnano LED

Battery Status Indicator

UVnano Indicator

Mood light

(When you open the

charging case, the mood

light turns on and off.)

Microphone

TouchpadTouchpad

Charging terminalsCharging terminals

Speaker mesh

6

Pairing and Connecting

Fast Pair

-(

#MVFUPPUI

0/

~39 inch, ~1m

1 Turn on the Bluetooth function on the mobile phone or the device to be connected.

2 Open the cover of the charging case with the earbuds mounted on the case. Press the

pairing button for 3 to 5 seconds until the blue battery status lamp blinks.

-(

-()#4'/

-(

-()#4'/

#MVFUPPUI

3 When the Fast Pair connection pop-up appears on the top area of the mobile phone

screen, tap it to connect. (It only supports Android™ 6.0 or higher, and requires

conguring Bluetooth and location information settings of the mobile device.)

4 If the pop-up does not appear, select [LG HBS-FN7] from the Bluetooth menu on the

mobile phone and connect it (for users of iOS or Android 5.0 or lower versions).

NOTE: To connect with another device, perform the above procedure again.

!

CAUTION: In the list of Bluetooth connected devices, LG HBS-FN7_LE is not the

correct model name for connection. Check the model name in use and

connect with the model name without “LE”.

7

Automatic Reconnection

The earbuds are connected automatically when you open the cover of the charging case. If

you close the cover of the charging case with both earbuds mounted in the charging case,

the earbuds are disconnected.

Wearing Earbuds

1 Separate the earbuds from the charging case and adjust them so that they t

comfortably in your ears.

NOTE: You can easily separate the earbuds from the charging case by turning the part

with dotted line in the image below to left or right and lifting the earbuds.

2 When you wear the earbuds, you will hear a wearing detection alarm.

8

Playing Music

-(

Function Description

Play / Pause

: Touch the left or right earbud once.

Adjusting the

Volume

: Touch the left(Decrease volume) or right(Increase

volume) earbud twice.

Play Next

: Touch the left or right earbud three times.

NOTE: You can change the operation method of the function in the touchpad settings of

the LG TONE Free app.

9

Mobile Calling Functions

Function Status Description

Answering Calls Ringing Touch the left or right earbud once.

Ending Calls Talking Touch the left or right earbud twice.

Making Calls Idle

If you make a call using a mobile phone, the call is

automatically connected to the headset.

Receiving Calls

while on the

Phone

Talking

If you touch the left or right earbud once, the

current call will go on hold, and you will be able to

answer an incoming call.

If the previous call is on hold, you can nish the

current call on the mobile phone.

(It works differently depending on the mobile phone

settings.)

Rejecting Calls Ringing Touch and hold the left or right earbud.

10

Listen to the Ambient Sound (LAS) / Active Noise Cancellation (ANC)

Listen to the Ambient Sound (LAS)

Touch and hold the left or right

earbud to switch between the ANC

mode and the LAS mode.

You can set the LAS and ANC

functions in the LG TONE Free app.

If you use the LAS or ANC function,

the battery consumes faster, reducing

the time you can use the product.

You can use the LAS and ANC

functions while being idle, listening to

music, or being on the phone.

NOTE: ANC is an acronym for Active

Noise Cancellation.

!

CAUTION: When the LAS mode is

enabled, you may hear the ambient

sound become loud suddenly.

When using the ANC function

outdoors, pay attention to the

surrounding environment for

safety.

The Listen to the Ambient Sound (LAS)

function allows you to listen to the ambient

sound so that you can recognize the

surrounding situation and any potential risks.

Active Noise Cancellation (ANC)

The Active Noise Cancellation (ANC)

function blocks any ambient sound. So, you

can use the function to listen to the music or

watch a video without interference.

11

UVnano

The charging case has a built-in UVnano LED,

which allows you to use your earbuds cleanly.

If you charge the earbuds wired after

mounting them on the charging case and

closing the cover, the UVnano LED operates

for 10 minutes.

*UVnano is a compound word derived from the

words UV and its unit, nanometer.

NOTE: The UVnano indicator turns on blue while the UVnano LED is on.

The UVnano LED in the charging case eliminates up to 99.9% of Staphylococcus

aureus and Escherichia coli inside the earbud hole.

In the case of a white product, discoloring may occur in the contact area of the

UVnano LED, but it does not affect the product function.

The UVnano LED does not turn on while charging wirelessly.

!

CAUTION: Be aware that the temperature of the earbuds may rise while the UVnano

LED is on.

12

Charging

Wired Charging

When the charging cable is connected, the charging status is displayed in the charging case.

NOTE: The earbuds and the charging case are charged at the same time.

The charging port on the charging case cannot be used to supply power to mobile

phones, etc.

Wireless Charging

Align the bottom center of the charging case with the center of the wireless charger.

NOTE: The wireless charger is not provided. The wireless charging function may not work in

some wireless chargers. Wireless charging feature charges at a slower rate due to

less power being transmitted to the charging case.

13

Checking the Battery Status

If earbuds are mounted in the charging case, the earbuds’ battery status is displayed.

Otherwise, the charging case’s battery status is displayed.

If the earbuds are mounted in the charging case while plugged in, the UVnano process will

commence for ten minutes.

Once this process is complete, the charging case's battery status will be displayed.

Battery

Status

Indicator

Remaining Battery

(charger not

connected)

Charging

State (charger

connected)

Red 20% or lower Charging

Yellow 20% - 80% -

Green 80% or higher Fully charged

NOTE: When the charging case lid is closed, charging case

battery status is displayed. If the charging case has no

remaining charge, there will be no display and it cannot

function. We recommend you keep the charging case

charged at all times as the earbuds are not able to be

turned on and turned off independently.

14

Battery Status Indicator

Status Description

Bluetooth Search Mode The battery status indicator ashes in blue.

Battery below 20% The battery status indicator turns on and off in red.

Battery 20% - 80% The battery status indicator turns on and off in yellow.

Battery 80% or more The battery status indicator turns on and off in green.

When there is a problem

while charging

The battery status indicator ashes in red.

Charging

(charger connected)

The battery status indicator turns on in red.

Charging complete

(charger connected)

The battery status indicator turns on in green.

Out of Range

If the device connected to the product is out of effective communication range, the

communication signal becomes weak and the communication is lost. The effective

communication range may vary depending on surrounding and other conditions.

If the device comes back within effective communication range, the product automatically

reconnects to the device. If the device is not automatically reconnected, touch the left or

right earbud once to connect them.

15

LG TONE Free

If you install the “LG TONE Free” app, you can use Check Earbud Battery, Voice Alert,

Change Equalizer Mode, Check Last Connected Location Information, and Find My Earbuds

functions. Check out the app for more details.

To install the “LG TONE Free” app, search LG TONE Free in the Google Play Store or

App Store or scan the QR code below.

It supports Android 5.0 or higher and iOS 11 or higher.

Google Play App Store

16

Troubleshooting

If you see any of the following symptoms while using the product, make sure to recheck it.

It may not be a malfunction.

Symptom Cause and Solution

The power does not

turn on

Check the battery level and charge it.

If unable to make a call

with earbuds

If the mobile phone does not support headset and hands-

free functions, you cannot use the calling features.

Check the battery level and charge it.

If unable to register

earbuds to mobile

phone

Check whether earbuds are turned on.

Check if the charging case of earbuds are in search mode.

- Press the pairing button on the charging case to switch

to search mode.

If you replaced the

earbuds or there is

a problem with the

operation

Put the earbuds in the charging case and, with the case open,

press the pairing button for 10 seconds or more.

- The factory reset proceeds while the battery status

indicator on the charging case ashes red.

Please reconnect the device after factory reset.

17

Specications and Features

Item Comments

Bluetooth Specications V 5.0 (Headset/Hands-Free/A2DP/AVRCP)

Battery

Earbud : 3.7 V / 55 mAh, Lithium-ion

Charging case : 3.7 V / 390 mAh, Lithium-ion

Music Play Time Earbuds

& With Charging case

(ANC ON)

Up to 7 & Up to 21 hours (Up to 5 / Up to 15 hours)*

Charging Time

Earbud : within an hour / Charging case : within 2 hours

Fast Charging : 5 min charge for up to 60 min playtime

※ When charging wired at room temperature

Rated Input Voltage

Earbud : DC 5 V, 110 mA

Charging case : DC 5 V, 500 mA

Operating Temperature 0 °C (+32 °F) ~ +40 °C (+104 °F)

Dimensions (mm) /

Weight (g)

Earbud : 16.2 mm (W) X 32.7 mm (L) X 26.8 mm (H) /

5.6 g (One earbud)

Charging case : 54.5 mm (W) X 54.5 mm (L) X 27.6 mm (H) /

39 g

Frequency range 2402 MHz to 2480 MHz

Output power (Max.) 10 dBm

18

*Duration of use may vary depending on the connected mobile device, features being used,

settings, signal strength, operating temperature, frequency band, and other methods of use.

Fast charging feature does not apply when charging case is placed on wireless charging

device such as a pad.

Wireless charging feature charges at a slower rate due to less power being transmitted to

the charging case.

La page charge ...

LG Tone Free Bluetooth Stereo Headset Manuel utilisateur

Ce manuel convient également à

LG Tone Free Bluetooth Stereo Headset Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents