Extron DA HD 4K Series Manuel utilisateur

Catégorie
Commutateurs vidéo
Taper
Manuel utilisateur
68-2636-01 Rev. D
01 19
DA HD 4K Series
User Guide
Distribution Amplifiers
4K HDMI Distribution Amplifier
Safety Instructions
Safety Instructions • English
WARNING: This symbol, , when used on the product, is intended to
alert the user of the presence of uninsulated dangerous voltage within
the product’s enclosure that may present a risk of electric shock.
ATTENTION: This symbol, , when used on the product, is intended
to alert the user of important operating and maintenance (servicing)
instructions in the literature provided with the equipment.
For information on safety guidelines, regulatory compliances, EMI/EMF
compatibility, accessibility, and related topics, see the Extron Safety and
Regulatory Compliance Guide, part number 68-290-01, on the Extron
website,
www.extron.com.
Sicherheitsanweisungen • Deutsch
WARNUNG: Dieses Symbol auf dem Produkt soll den Benutzer
darauf aufmerksam machen, dass im Inneren des Gehäuses dieses
Produktes gefährliche Spannungen herrschen, die nicht isoliert sind und
die einen elektrischen Schlag verursachen können.
VORSICHT: Dieses Symbol auf dem Produkt soll dem Benutzer in
der im Lieferumfang enthaltenen Dokumentation besonders wichtige
Hinweise zur Bedienung und Wartung (Instandhaltung) geben.
Weitere Informationen über die Sicherheitsrichtlinien, Produkthandhabung,
EMI/EMF-Kompatibilität, Zugänglichkeit und verwandte Themen finden Sie in
den Extron-Richtlinien für Sicherheit und Handhabung (Artikelnummer
68-290-01) auf der Extron-Website, www.extron.com.
Instrucciones de seguridad • Español
ADVERTENCIA: Este símbolo, , cuando se utiliza en el producto,
avisa al usuario de la presencia de voltaje peligroso sin aislar dentro del
producto, lo que puede representar un riesgo de descarga eléctrica.
ATENCIÓN: Este símbolo, , cuando se utiliza en el producto, avisa
al usuario de la presencia de importantes instrucciones de uso y
mantenimiento recogidas en la documentación proporcionada con el
equipo.
Para obtener información sobre directrices de seguridad, cumplimiento
de normativas, compatibilidad electromagnética, accesibilidad y temas
relacionados, consulte la Guía de cumplimiento de normativas y seguridad
de Extron, referencia 68-290-01, en el sitio Web de Extron, www.extron.com.
Instructions de sécurité • Français
AVERTISSEMENT : Ce pictogramme, , lorsqu’il est utilisé sur le
produit, signale à l’utilisateur la présence à l’intérieur du boîtier du
produit d’une tension électrique dangereuse susceptible de provoquer
un choc électrique.
ATTENTION : Ce pictogramme, , lorsqu’il est utilisé sur le produit,
signale à l’utilisateur des instructions d’utilisation ou de maintenance
importantes qui se trouvent dans la documentation fournie avec le
matériel.
Pour en savoir plus sur les règles de sécurité, la conformité à la
réglementation, la compatibilité EMI/EMF, l’accessibilité, et autres sujets
connexes, lisez les informations de sécurité et de conformité Extron, réf.
68-290-01, sur le site Extron, www.extron.com.
Istruzioni di sicurezza • Italiano
AVVERTENZA: Il simbolo, , se usato sul prodotto, serve ad
avvertire l’utente della presenza di tensione non isolata pericolosa
all’interno del contenitore del prodotto che può costituire un rischio di
scosse elettriche.
ATTENTZIONE: Il simbolo, , se usato sul prodotto, serve ad
avvertire l’utente della presenza di importanti istruzioni di funzionamento
e manutenzione nella documentazione fornita con l’apparecchio.
Per informazioni su parametri di sicurezza, conformità alle normative,
compatibilità EMI/EMF, accessibilità e argomenti simili, fare riferimento
alla Guida alla conformità normativa e di sicurezza di Extron, cod. articolo
68-290-01, sul sito web di Extron, www.extron.com.
Instrukcje bezpieczeństwa • Polska
OSTRZEŻENIE: Ten symbol, , gdy używany na produkt, ma na celu
poinformować użytkownika o obecności izolowanego i niebezpiecznego
napięcia wewnątrz obudowy produktu, który może stanowić zagrenie
porażenia prądem elektrycznym.
UWAGI: Ten symbol, , gdy używany na produkt, jest przeznaczony do
ostrzegania użytkownika ważne operacyjne oraz instrukcje konserwacji
(obsługi) w literaturze, wyposażone w sprzęt.
Informacji na temat wytycznych w sprawie bezpieczeństwa, regulacji
wzajemnej zgodności, zgodność EMI/EMF, dostępności i Tematy pokrewne,
zobacz Extron bezpieczeństwa i regulacyjnego zgodności przewodnik, część
numer 68-290-01, na stronie internetowej Extron,
www.extron.com.
Инструкция по технике безопасности Русский
ПРЕДУПРЕЖДЕНИЕ: Данный символ, , если указан
на продукте, предупреждает пользователя о наличии
неизолированного опасного напряжения внутри корпуса
продукта, которое может привести к поражению
электрическим током.
ВНИМАНИЕ: Данный символ, , если указан на продукте,
предупреждает пользователя о наличии важных инструкций
по эксплуатации и обслуживанию в руководстве,
прилагаемом к данному оборудованию.
Для получения информации о правилах техники безопасности,
соблюдении нормативных требований, электромагнитной
совместимости (ЭМП/ЭДС), возможности доступа и других
вопросах см. руководство по безопасности и соблюдению
нормативных требований Extron на сайте Extron: ,
www.extron.com, номер по каталогу - 68-290-01.
安全说明 简体中文
警告 产品上的这个标志意在警告用户该产品机壳内有暴露的危险 电压,
险。
注意 产品上的这个标志意在提示用户设备随附的用户手册中有
重要的操作和维护(维修说明。
关于我们产品的安全指南、遵循的规范、EMI/EMF 的兼容性、无障碍
使用的特性等相关内容,敬请访问 Extron 网站 , www.extron.com,参见
Extron 安全规范指南,产品编号 68-290-01
Copyright
© 2017
-2019 Extron Electronics. All rights reserved.
Trademarks
All trademarks mentioned in this guide are the properties of their respective owners.
The following registered trademarks(
®
), registered service marks(
SM
), and trademarks(
TM
) are the property of RGBSystems, Inc. or
ExtronElectronics (see the current list of trademarks on the Terms of Use page at www.extron.com):
Registered Trademarks
(
®
)
Extron, Cable Cubby, ControlScript, CrossPoint, DTP, eBUS, EDID Manager, EDID Minder, Flat Field, FlexOS, Global Configurator,
GlobalScripter, GlobalViewer, Hideaway, HyperLane, IPIntercom, IPLink, KeyMinder, LinkLicense, LockIt, MediaLink, MediaPort, NetPA,
PlenumVault, PoleVault, PowerCage, PURE3, Quantum, SoundField, SpeedMount, SpeedSwitch, SystemINTEGRATOR, TeamWork,
TouchLink, V-Lock, VideoLounge, VN-Matrix, VoiceLift, WallVault, WindoWall, XTP, XTPSystems, and ZipClip
Registered Service Mark
(SM)
: S3 Service Support Solutions
Trademarks
(
)
AAP, AFL (Accu-RateFrameLock), ADSP(Advanced Digital Sync Processing), Auto-Image, CableCover, CDRS(ClassD Ripple
Suppression), Codec Connect, DDSP(Digital Display Sync Processing), DMI (DynamicMotionInterpolation), DriverConfigurator,
DSPConfigurator, DSVP(Digital Sync Validation Processing), eLink, EQIP, Everlast, FastBite, FOX, FOXBOX, IP Intercom HelpDesk,
MAAP, MicroDigital, Opti-Torque, ProDSP, QS-FPC(QuickSwitch Front Panel Controller), Room Agent, Scope-Trigger, ShareLink,
Show Me, SIS, SimpleInstructionSet, Skew-Free, SpeedNav, StudioStation, Triple-Action Switching, True4K, Vector™ 4K , WebShare,
XTRA, and ZipCaddy
안전 지침 • 한국어
경고: 이 기호 가 제품에 사용될 경우, 제품의 인클로저 내에 있는
접지되지 않은 위험한 전류로 인해 사용자가 감전될 위험이 있음을
경고합니다.
주의: 이 기호 가 제품에 사용될 경우, 장비와 함께 제공된 책자에 나와
있는 주요 운영 및 유지보수(정비) 지침을 경고합
니다.
안전 가이드라인, 규제 준수, EMI/EMF 호환성, 접근성, 그리고 관련 항목에
대한 자세한 내용은 Extron 웹 사이트(www.extron.com)의 Extron 안전 및
규제 준수 안내서, 68-290-01 조항을 참조하십시오.
安全記事 • 繁體中文
警告: 若產品上使用此符是為了提醒使用者產品機殼內存
可能會導致觸電之風險的未絕緣危險電壓
注意 品上使用此符號,是為提醒使用設備隨附的用戶手冊中
重要的操作和維(維修説明
有關安全性指導方針法規遵EMI/EMF 相容存取範圍和關主題的詳細
訊,請瀏覽 Extron 網站:www.extron.com然後《Extron 安全性與法規
守手冊準則編號 68-290-01
安全上の注意 日本語
警告: この が製品上に表示されている場合は筐体内に絶縁され
いない高電圧が流れ、感電の危険があるを示ています
意:この が製上に表示されている場合は、本機の取書に
されている重作と保()のについてユーザー
を喚起するものです
安全上の注意、法規厳守、EMI/EMF適合性、その他の関連項
スト イト www.extron.com よ り Extron Safety
and Regulatory Compliance Guide』 ( P/N 68-290-01) をご覧ださい。
FCC Class A Notice
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part15 of the FCC rules. The ClassA limits provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause interference. This interference must be corrected at the expense of the user.
ATTENTION: The Twisted Pair Extension technology works with unshielded twisted
pair (UTP) or shielded twisted pair (STP) cables; but to ensure FCC Class A and CE
compliance, STP cables and STP Connectors are required.
For more information on safety guidelines, regulatory compliances, EMI/EMF
compatibility, accessibility, and related topics, see the “Extron Safety and
Regulatory Compliance Guideon the Extron website.
Conventions Used in this Guide
Notifications
The following notifications are used in this guide:
WARNING: Potential risk of severe injury or death.
AVERTISSEMENT : Risque potentiel de blessure grave ou de mort.
CAUTION: Risk of minor personal injury.
ATTENTION : Risque de blessuremineure.
ATTENTION:
Risk of property damage.
Risque de dommages matériels.
NOTE: A note draws attention to important information.
TIP: A tip provides a suggestion to make working with the application easier.
Software Commands
Commands are written in the fonts shown here:
^AR Merge Scene,,Op1 scene 1,1 ^B 51 ^W^C
[01] R 0004 00300 00400 00800 00600 [02] 35 [17] [03]
E X! *X1&* X2)* X2#* X2! CE}
NOTE: For commands and examples of computer or device responses
mentioned in this guide, the character 0is used for the number zero and “O”
is the capital letter “o.”
Computer responses and directory paths that do not have variables are written in the font
shown here:
Reply from 208.132.180.48: bytes=32 times=2ms TTL=32
C:\Program Files\Extron
Variables are written in slanted form as shown here:
ping xxx.xxx.xxx.xxx —t
SOH R Data STX Command ETB ETX
Selectable items, such as menu names, menu options, buttons, tabs, and field names are
written in the font shown here:
From the File menu, select New.
Click the OK button.
Specifications Availability
Product specifications are available on the Extron website, www.extron.com.
Extron Glossary of Terms
A glossary of terms is available at http://www.extron.com/technology/glossary.aspx.
Contents
Introduction............................................................ 1
About the DA2 HD 4K,DA4 HD 4K,
and DA6 HD 4K .................................................. 1
Features ............................................................. 1
Application Diagram ........................................... 3
Installation .............................................................. 4
Installation Overview ........................................... 4
Rear Panel Connectors ....................................... 5
Connecting Power .......................................... 6
Connecting the Input Source .......................... 8
Securing the HDMI Connector ........................ 8
Connecting Output Displays ........................... 9
Wiring for RS-232 Control (Optional) ............. 10
Front Panel Features ......................................... 13
Configuration ....................................................... 15
EDID Minder ..................................................... 15
HDCP ............................................................... 16
Output Compatibility Correction ........................ 17
SIS Commands ................................................... 18
Introduction to SIS ........................................... 18
Symbols Used in this Guide .............................. 19
Error Messages ............................................ 20
Command and Response Table
for SIS Commands ........................................... 21
Configuration Software ..................................... 25
Downloading PCS from the Extron Website ...... 25
Using PCS Software ......................................... 26
Overview ...................................................... 26
Input/Output Configuration ........................... 27
EDID Minder ................................................. 28
Device Menu................................................. 28
PCS Help File ............................................... 28
Updating Firmware ........................................... 29
Downloading Firmware to a PC .................... 29
Uploading Firmware to a
DA HD 4K Device ......................................... 29
Mounting ............................................................... 31
Desktop Placement .......................................... 31
Rack Mounting ................................................. 31
UL Guidelines for Rack Mounting .................. 31
Rack Mounting Procedure ............................ 31
Under-desk Mounting ....................................... 31
Extron Warranty .................................................. 32
DA HD 4K Series • Contents vii
DA HD 4K Series • Contents viii
Introduction
This guide describes the function, installation, and operation of the DA2 HD 4K, DA4 HD 4K,
and DA6 HD 4K. Unless otherwise stated, the terms “distribution amplifier” or “DA” refer to any
of these distribution amplifiers.
This section provides the following information:
About the DA2 HD4K,DA4 HD4K, and DA6 HD4K
Features
Application Diagram
About the DA2 HD 4K,DA4 HD 4K, and DA6 HD 4K
The Extron DA HD 4K Series are one input, multiple output HDMI distribution amplifiers for 4K
signals. They distribute one 4K input signal to two (DA2 HD 4K), four (DA4 HD 4K), or six
(DA6 HD 4K) simultaneous outputs. They support data rates up to 10.2 Gbps, including
computer and video resolutions up to 4096x2160 @ 30 Hz and 1080p @ 60 Hz with Deep
Color, 3D, Lip Sync, and HD lossless audio formats.
NOTE: Extron strongly recommends compatibility testing while designing, and before installing
any 3D system. There are several unique 3D formats in use by source devices and display
manufacturers. The level of 3D product support is governed by pixel clock, signal format, and
communication between source and sink devices. For more information, call the Extron S3
Sales and Technical Support Hotline (see contact numbers on the last page).
All three models feature EDID Minder, which maintains continuous EDID communication
between connected devices, and Key Minder, which continuously authenticates HDCP
encryption between all devices, ensuring the simultaneous distribution of source content to all
displays.
The DA HD 4K Series provides automatic input cable equalization (up to 25 feet, 7.62 meters,
for 4K signals), automatic color bit depth adjustment, and allows outputs to be independently
muted.
Front panel LEDs provide immediate confirmation of HDCP authentication and signal presence.
Features
4K signal distribution — Distributes 4K HDMI video and embedded multi-channel digital
audio signals. These distribution amplifiers accept one UHD 4K input through a female
HDMI type-A connector and provide two (DA2 HD 4K), four (DA4 HD 4K), or six
(DA6 HD 4K) simultaneous outputs.
Supports HDMI 1.4 specifications, including:
Data rates up to 10.2 Gbps
Deep Color up to 12-bit
3D
Lip Sync
HD lossless audio formats
Supports computer and video resolutions up to 4K, including 1080p @ 60 Hz Deep
Color.
DA HD 4K Series • Introduction 1
EDID Minder automatically manages EDID communication between connected
devices ensuring that the source powers up properly and reliably outputs content for
display.
HDCP compliant
Key Minder continuously verifies HDCP compliance — Key Minder authenticates and
maintains continuous HDCP encryption between all input and output devices to enable
simultaneous distribution of a single source signal to two, four, or six displays.
HDCP Visual Confirmation — A full-screen green signal is sent when HDCP-encrypted
content is transmitted to a non-HDCP compliant display, providing immediate visual
confirmation that protected content cannot be viewed on the display.
Automatic input cable equalization — Up to 25 feet (7.62 meters) when used with
Extron HDMI Pro Series cable. Actively conditions incoming HDMI signals to compensate
for signal loss when using long cables, low quality cables, or source devices with poor
signal output.
Automatic color bit depth management — The DA HD 4K Series automatically adjusts
color bit depth based on the display EDID, preventing color compatibility conflicts between
source and displays.
HDMI to DVI Interface Format Correction — Automatically reformats HDMI source
signals for output to a connected DVI display.
Output muting via RS‑232 or USB port — Provides the capability to mute one or all
outputs at any time. This allows content to be viewed on a local monitor prior to appearing
on the main presentation display.
HDCP authentication and signal presence LED indicators — Front-panel LED
indicators for signal presence and HDCP authentication provide real-time feedback and
monitoring of key performance parameters.
Easy setup and commissioning with Extron Product Configuration Software (PCS)
— Conveniently configure multiple products using a single software application.
Easy mounting options — The DA2 HD 4K features a 1 inch(2.5cm) high, quarterrack
width enclosure. The DA4 HD 4K and DA6 HD 4K feature a 1U high, halfrack width
enclosure. All three products can be conveniently mounted in standard racks or under
furniture.
Includes LockIt HDMI cable lacing bracketsLockIt lacing brackets are used to
secure HDMI cables connected to the HDMI input and output connectors, preventing
accidental disconnection of the cables.
Provides +5 VDC, 250 mA power on each output for external peripheral devices.
Worldwide power compatibility — The DA2 HD 4K includes an energy-efficient external
universal power supply. The DA4 HD 4K and DA6 HD 4K are equipped with an
100-240 VAC, 50/60 Hz, internal universal power supply.
DA HD 4K Series • Introduction 2
Application Diagram
Figure 1 shows a typical application for the DA4 HD 4K. The DA2 HD 4K and DA6 HD 4K can
be used in similar applications.
50/60 Hz
100-240V ~ 0.3A MAX
DA4 HD 4K
RS-232
4321
Tx Rx G
REMOTEOUTPUTSINPUT
1
31
42
31
42
31
42
2
3
100
LINK
ACT
COM
IR
INPUT
RELAY
TX RX
R
IPL 250
®
ON
OFF
DISPLAY
MUTE
SCREEN
UP
SCREEN
DOWN
VCR
DVD
DOC
CAM
LAPTOP
PC
POWER
SD CARD USB
PLAY STATUS
MODEL 80
MODEL 80
MODEL 80
MODEL 80
Extron
DA4 HD 4K
Distribution
Amplier
HDMI
Cables
RS-232
TCP/IP
TouchLink
Control
System
4K Displays
4K Video Player
Figure 1. DA4 HD 4K Application Diagram
DA HD 4K Series • Introduction 3
Installation
This section provides an overview of the installation of the DA HD 4K series distribution
amplifiers, including the front panel and rear panel connections. Follow the links for more
detailed information elsewhere in the guide.
This section provides the following information:
Installation Overview
Rear Panel Connectors
Front Panel Features
Installation Overview
To install and set up the DA HD 4K series distribution amplifiers, follow these instructions:
1. Mount the unit in a suitable location (see Mounting on page 31).
2. Connect power to the unit:
DA2 HD 4K — connect the provided 12 VDC power supply to the power connector
(see Connecting Power on page 6).
ATTENTION:
Do not connect any external power supplies until you have read the
Attention notifications on page 7.
Ne branchez pas de sources d’alimentation externes avant d’avoir lu les
mises en garde sur la page 7.
DA4 HD 4K and DA6 HD 4K — connect to a 100-240 VAC (50 or 60 Hz) power
source using the provided IEC power cord (see page 7).
3. Connect the display devices and power them on (see Connecting Output Displays on
page9).
The distribution amplifier automatically reads and stored EDID from the selected display
device. By default, this is the device connected to output 1. For other EDID options, see
EDID Minder on page 15.
4. If configuration using SIS commands is required (see SIS Commands starting on page
18), connect a control PC to the rear panel RS-232, 3-pole captive screw connector (see
Rear panel RS‑232 connector on page10) or the front panel USB port (see Front
panel USB port on page11).
5. Connect and power on the input device (see Connecting the Input Source on page 8).
DA HD 4K Series • Installation 4
Rear Panel Connectors
This section provides information about the rear panel connectors:
RS-232
Tx Rx G
1 2
INPUT
REMOTE
OUTPUTS
POWER
12V
0.4A MAX
RS-232
Tx Rx G
1 2
INPUT
REMOTE
OUTPUTS
POWER
12V
0.4A MAX
50/60 Hz
100-240V ~ 0.3A MAX
DA4 HD 4K
RS-232
4321
Tx Rx G
REMOTEOUTPUTSINPUT
50/60 Hz
100-240V ~ 0.3A MAX
DA4 HD 4K
RS-232
4321
Tx Rx G
REMOTEOUTPUTSINPUT
50/60 Hz
100-240V ~ 0.3A MAX
DA6 HD 4K
RS-232
43 6521
Tx Rx G
OUTPUTS REMOTEINPUT
50/60 Hz
100-240V ~ 0.3A MAX
DA6 HD 4K
RS-232
43 6521
Tx Rx G
OUTPUTS REMOTEINPUT
AA
CC DD EE
D
D EECCBB
Figure 2. Rear Panel Connectors
A
Power supply connector (DA2 HD 4K only)
B
IEC cable connector (DA4 HD 4K and DA6 HD 4K
)
C
HDMI input connector
D
HDMI output connectors
E
RS‑232 connector
DA HD 4K Series • Installation 5
SECTION A–A
Ridges
Smooth
AA
3/16"
(5 mm) Max.
POWER
12V
0.3A MAX
Connecting Power
DA2 HD 4K
A
Power supply connector — connect the provided 12 VDC,
1.0 A power supply to the rear panel power supply socket
(see figure 2 on the previous page).
WARNING: The two power cord wires must be kept
separate while the power supply is plugged in. Remove
power before wiring.
AVERTISSEMENT: Les deux cordons d’alimentation
doivent être tenus à l’écart l’un de l’autre quand
l’alimentation est branchée. Couper l’alimentation avant
de faire l’installation électrique.
ATTENTION:
Do not connect any external power supplies until you
have read the Attention notifications on page 7.
Ne branchez pas de sources d’alimentation externes
avant d’avoir lu les mises en garde sur la page 7.
1. Cut the DC output cord to the length needed.
2. Strip the jacket to expose 3/16 inch (5 mm) of the
conductor wire.
ATTENTION:
The length of the exposed wires in the stripping process is critical. The ideal
length is 3/16 inches (5 mm). Any longer and the exposed wires may touch,
causing a short circuit between them. Any shorter and the wires can be
easily pulled out even if tightly fastened by the captive screws.
La longueur des câbles exposés est primordiale lorsque l’on entreprend de
les dénuder. La longueur idéale est de 5mm (3/16inches). S’ils sont un peu
plus longs, les câbles exposés pourraient se toucher et provoquer un court
circuit. S’ils sont un peu plus courts, ils pourraient sortir, même s’ils sont
attachés par les vis captives.
3. Ensure the connections have the correct polarity as shown in the figure above.
4. Slide the exposed end of the wire into the captive screw connector and secure by
tightening the screw.
5. Use the supplied tie wrap to strap the power cord to the extended tail of the
connector.
DA HD 4K Series • Installation 6
ATTENTION:
Always use a power supply provided by or specified by Extron. Use of an
unauthorized power supply voids all regulatory compliance certification and may
cause damage to the supply and the end product.
Utilisez toujours une source d’alimentation fournie ou recommandée par Extron.
L’utilisation d’une source d’alimentation non autorisée annule toute conformité
réglementaire et peut endommager la source d’alimentation ainsi que le produit final.
These products are intended for use with a UL Listed power source marked “Class 2”
or “LPS” and rated 12VDC, minimum 0.5 A.
Ces produits sont destiné à une utilisation avec une source d’alimentation listéeUL
avec l’appellation «Classe2» ou «LPS» et normée 12Vcc, 0.5A minimum.
Extron power supplies are certified to UL/CSA 60950-1 and are classified as LPS
(Limited Power Source). Use of a non-LPS or unlisted power supply will void all
regulatory compliance certification.
Les sources d’alimentation Extron sont qualifiées UL/CSA60950-1 et sont
classéesLPS(LimitedPowerSource). L’utilisation d’une source d’alimentation non-
listée ou non-listéeLPS annulera toute certification de conformité réglementaire.
Unless otherwise stated, the AC/DC adapters are not suitable for use in air handling
spaces or in wall cavities. The power supply is to be located within the same vicinity
as the Extron AV processing equipment in an ordinary location, Pollution Degree 2,
secured to the equipment rack within the dedicated closet, podium, or desk.
Sauf mention contraire, les adaptateurs AC/DC ne sont pas appropriés pour une
utilisation dans les espaces d’aération ou dans les cavités murales. La source
d’alimentation doit être située à proximité de l’équipement de traitement audiovisuel
dans un endroit ordinaire, avec un degré2 de pollution, fixé à un équipement de rack
à l’intérieur d’un placard, d’une estrade, ou d’un bureau.
The installation must always be in accordance with the applicable provisions of
National Electrical Code ANSI/NFPA 70, article 725 and the Canadian Electrical Code
part 1, section 16.
Cette installation doit toujours être en accord avec les mesures qui s’applique au
National Electrical Code ANSI/NFPA70, article725, et au Canadian Electrical Code,
partie1, section16.
The power supply shall not be permanently fixed to building structure or similar
structure.
La source d’alimentation ne devra pas être fixée de façon permanente à une structure
de bâtiment ou à une structure similaire.
Do not tin the wire leads before installing into the connector. Tinned wires are not as
secure in the connector and could be pulled out. They may also break after being
bent several times.
Ne pas étamer les conducteurs avant de les insérer dans le connecteur. Les câbles
étamés ne sont pas aussi bien fixés dans le connecteur et pourraient être retirés. Ils
peuvent aussi se casser après avoir été pliés plusieurs fois.
DA4 HD 4K and DA6 HD 4K
B
IEC cable connector — use the provided female IEC cable to connect the female
IECconnector to a 100-240VAC (50or 60 Hz) power source (see figure 2 on page 5).
DA HD 4K Series • Installation 7
Connecting the Input Source
C
HDMI input connector — use HDMI cable to connect the input source to the rear panel
female HDMI connector (see figure 2,
C
on page 5).
The input follows HDMI 1.4 specifications, supporting data rates up to 3.4 Gbps per color
and is fully HDCP compliant.
The input can equalize up to 100 feet (30.48 m) of HDMI Pro cable with a 1.65 Gbps per
color signal or 25 feet (7.52 m) with a 3.4 Gbps per color signal.
EDID is stored on an EEPROM, and Hot-Plug Detect (HPD) is actively controlled by EDID
Minder (see page 15).
Securing the HDMI Connector
Follow these instructions to secure the input and output connectors to the distribution
amplifier with the LockIt HDMI lacing bracket provided:
1. Plug the HDMI cable into the panel
connection (
1
).
2. Loosen the HDMI connection mounting
screw from the panel enough to allow the
LockIt lacing bracket to be placed over
it (
2
). The screw does not have to be
removed.
3. Place the LockIt lacing bracket on the screw
and against the HDMI connector, then tighten
the screw to secure the bracket (
3
).
ATTENTION:
Do not overtighten the connector
mounting screw. The shield it fastens
to is very thin and can easily be
stripped.
Ne serrez pas trop la vis de montage
du connecteur. Le blindage auquel
elle est attachée est très fin et peut
facilement être dénudé.
4. Loosely place the included tie wrap around the HDMI connector and the LockIt lacing
bracket as shown (
4
).
5. While holding the connector securely against the lacing bracket, tighten the tie wrap,
then remove any excess length.
3
11
2
2
3
3
4
4
DA HD 4K Series • Installation 8
Connecting Output Displays
D
HDMI output connectors — use a UHD 4K cable to connect up to six output displays
to the female HDMI sockets on the rear panel (see figure 2,
D
on page 5).
NOTE: Secure the input and output connectors to the distribution amplifier with the
provided LockIt HDMI lacing bracket (see Securing the HDMI Connector, on the
previous page).
By default, the EDID is set to 720p @ 60 Hz with 2-channel audio. However, EDID can be
changed by using SIS commands (see the EDID Minder command on page 23) or by
using PCS software (see page 28).
In addition to 12 factory-loaded EDIDs, there are six slots that are automatically populated
by EDID from connected sink devices and two slots that can be manually populated by
the user. For more information, see the EDID Minder table on page 15.
The distribution amplifier monitors the EDID of each connected display to ensure it is
compatible with the current input signal. The following adjustments are made for each
output independently:
Interface format — If the connected display is DVI and the input signal is HDMI, the
signal is reformatted to DVI. If the output is HDMI and the input is DVI, no reformatting
is needed because HDMI is backwards compatible with DVI.
Video color bit depth — If the connected output device does not support the color
bit depth of the input signal, it is truncated down to the next level that is supported
(12-bit>10-bit > 8-bit). The signal can be forced to always truncate to 8-bit via SIS
commands, disabling deep color.
Audio — If the connected output device does not support the audio format of the
input signal, audio is muted.
If the source requires HDCP encryption and the display is not HDCP compliant, that
output channel outputs a green screen.
Both outputs carry +5 VDC and up to 250 mA on pin 18, regulated by a current limiting
circuit.
DA HD 4K Series • Installation 9
Wiring for RS-232 Control (Optional)
Rear panel RS-232 connector
E
RS‑232 connector — use RS-232 communication between the distribution amplifier and
a host PC to update firmware or configure the unit using SIS commands (see Command
and Response Table for SIS Commands starting on page 21).
Extron recommends Extron universal control cable (see www.extron.com).
NOTES:
You can connect the computer to either the rear panel 3-pole RS-232 port (see
figure 2,
E
on page 5) or the front panel USB port (see figure 7,
B
on
page 13) of the distribution amplifier.
Neither port has precedence and commands from either port are handled in the
order they are received.
Extron recommends that the USB port is used for temporary connections. If a
permanent connection is required, the RS-232 port should be used.
RS-232
Tx Rx G
REMOTE
TransmitReceive
ReceiveTransmit
GroundGround
DB9 Pin Locations
Female
51
96
Pin 2 = Rx
Pin 3 = Tx
Pin 5 = G
Computer DA2 HD 4K
Figure 3. Wiring for Rear Panel RS‑232 Control
NOTES:
The wiring in the RS-232 cables crosses over so that the Tx on the distribution
amplifier connects to the Rx of the control device and vice versa. Ground always
connects to ground.
If you use cable that has a drain wire, tie the drain wire to the ground at both
ends.
To connect the distribution amplifier to a computer, follow these instructions:
1. Connect an RS-232 cable with a female 9-pin D connector to the computer (see
figure 3 above):
Data received by the computer = pin 2
Data transmitted by the computer = pin 3
Ground = pin 5
2. Wire the opposite end of the cable to the provided 3-pole captive screw plug (see
figure3 above):
Data transmitted by the DA plugs into the Tx (transmit) port
Data received by the DA plugs into the Rx (receive) port
Ground plugs into the G (ground) port
DA HD 4K Series • Installation 10
Front panel USB port
Use the mini Type B USB port on the front panel (see figure 4 below) to connect the
distribution amplifier to a host computer for updating firmware or to configure the unit with SIS
commands.
1. Connect a USB A to mini B cable between the front panel USB Config port and a USB
port of the PC.
DA6 HD 4K
DA6 HD 4K
DISTRIBUTION AMPLIFIER
CONFIG
HDCP
1234
SIGNAL
INPUT OUTPUTS
EDID
56
WiFi
1234
USB
Ports
PC
USB Cable
Type A
USB
Mini Type B
USB
Figure 4. Connecting a PC to the DA6 HD 4K Front Panel USB Port
2. If this is the first time the distribution amplifier has been connected to the PC, the
Found New Hardware Wizard window opens. The first screen offers to connect to
Windows Update to search the web for the appropriate driver needed for the USB port
to communicate with the distribution amplifier. This is not necessary if the USB driver is
already on your PC.
Figure 5. Found New Hardware Wizard Welcome Screen
DA HD 4K Series • Installation 11
Select Yes, this time only to connect the PC to Windows Update only this
time (see figure 5 on the previous page).
Select Yes, now, and every time I connect a device to automatically
connect to Windows Update every time the DA HD 4K device connects to this USB
port.
Select No, not this time if you do not want to connect to Windows Update (for
example, if the driver is already on the PC).
3. Click Next. The next screen of the Wizard opens (see figure 6):
Figure 6. Installing the Software Automatically
4. Select Install the software automatically (Recommended) and click Next
(see figure 6).
NOTE: You do not need to insert an installation disc.
The PC locates the driver needed and installs it in the correct location on the hard drive.
5. When the Completed screen appears, click Finish to close the wizard.
NOTE: The wizard opens only on the first occasion you connect the distribution
amplifier to that USB port. The wizard reappears if you connect the unit to a
different USB port or if you connect a different piece of equipment, requiring a
different driver, to the same USB port.
6. Configure the distribution amplifier as required (see Configuration Software, starting on
page 25).
DA HD 4K Series • Installation 12
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40

Extron DA HD 4K Series Manuel utilisateur

Catégorie
Commutateurs vidéo
Taper
Manuel utilisateur

dans d''autres langues