Extron DA HD 4K Series Manuel utilisateur

Marque: Extron

Modèle: DA HD 4K Series

Catégorie: Commutateurs vidéo

Taper: Manuel utilisateur

68-2636-01 Rev. D

01 19

DA HD 4K Series

User Guide

Distribution Ampliﬁers

4K HDMI Distribution Ampliﬁer

Safety Instructions

Safety Instructions • English

WARNING: This symbol, , when used on the product, is intended to

alert the user of the presence of uninsulated dangerous voltage within

the product’s enclosure that may present a risk of electric shock.

ATTENTION: This symbol, , when used on the product, is intended

to alert the user of important operating and maintenance (servicing)

instructions in the literature provided with the equipment.

For information on safety guidelines, regulatory compliances, EMI/EMF

compatibility, accessibility, and related topics, see the Extron Safety and

Regulatory Compliance Guide, part number 68-290-01, on the Extron

website,

www.extron.com.

Sicherheitsanweisungen • Deutsch

WARNUNG: Dieses Symbol auf dem Produkt soll den Benutzer

darauf aufmerksam machen, dass im Inneren des Gehäuses dieses

Produktes gefährliche Spannungen herrschen, die nicht isoliert sind und

die einen elektrischen Schlag verursachen können.

VORSICHT: Dieses Symbol auf dem Produkt soll dem Benutzer in

der im Lieferumfang enthaltenen Dokumentation besonders wichtige

Hinweise zur Bedienung und Wartung (Instandhaltung) geben.

Weitere Informationen über die Sicherheitsrichtlinien, Produkthandhabung,

EMI/EMF-Kompatibilität, Zugänglichkeit und verwandte Themen finden Sie in

den Extron-Richtlinien für Sicherheit und Handhabung (Artikelnummer

68-290-01) auf der Extron-Website, www.extron.com.

Instrucciones de seguridad • Español

ADVERTENCIA: Este símbolo, , cuando se utiliza en el producto,

avisa al usuario de la presencia de voltaje peligroso sin aislar dentro del

producto, lo que puede representar un riesgo de descarga eléctrica.

ATENCIÓN: Este símbolo, , cuando se utiliza en el producto, avisa

al usuario de la presencia de importantes instrucciones de uso y

mantenimiento recogidas en la documentación proporcionada con el

equipo.

Para obtener información sobre directrices de seguridad, cumplimiento

de normativas, compatibilidad electromagnética, accesibilidad y temas

relacionados, consulte la Guía de cumplimiento de normativas y seguridad

de Extron, referencia 68-290-01, en el sitio Web de Extron, www.extron.com.

Instructions de sécurité • Français

AVERTISSEMENT : Ce pictogramme, , lorsqu’il est utilisé sur le

produit, signale à l’utilisateur la présence à l’intérieur du boîtier du

produit d’une tension électrique dangereuse susceptible de provoquer

un choc électrique.

ATTENTION : Ce pictogramme, , lorsqu’il est utilisé sur le produit,

signale à l’utilisateur des instructions d’utilisation ou de maintenance

importantes qui se trouvent dans la documentation fournie avec le

matériel.

Pour en savoir plus sur les règles de sécurité, la conformité à la

réglementation, la compatibilité EMI/EMF, l’accessibilité, et autres sujets

connexes, lisez les informations de sécurité et de conformité Extron, réf.

68-290-01, sur le site Extron, www.extron.com.

Istruzioni di sicurezza • Italiano

AVVERTENZA: Il simbolo, , se usato sul prodotto, serve ad

avvertire l’utente della presenza di tensione non isolata pericolosa

all’interno del contenitore del prodotto che può costituire un rischio di

scosse elettriche.

ATTENTZIONE: Il simbolo, , se usato sul prodotto, serve ad

avvertire l’utente della presenza di importanti istruzioni di funzionamento

e manutenzione nella documentazione fornita con l’apparecchio.

Per informazioni su parametri di sicurezza, conformità alle normative,

compatibilità EMI/EMF, accessibilità e argomenti simili, fare riferimento

alla Guida alla conformità normativa e di sicurezza di Extron, cod. articolo

68-290-01, sul sito web di Extron, www.extron.com.

Instrukcje bezpieczeństwa • Polska

OSTRZEŻENIE: Ten symbol, , gdy używany na produkt, ma na celu

poinformować użytkownika o obecności izolowanego i niebezpiecznego

napięcia wewnątrz obudowy produktu, który może stanowić zagrożenie

porażenia prądem elektrycznym.

UWAGI: Ten symbol, , gdy używany na produkt, jest przeznaczony do

ostrzegania użytkownika ważne operacyjne oraz instrukcje konserwacji

(obsługi) w literaturze, wyposażone w sprzęt.

Informacji na temat wytycznych w sprawie bezpieczeństwa, regulacji

wzajemnej zgodności, zgodność EMI/EMF, dostępności i Tematy pokrewne,

zobacz Extron bezpieczeństwa i regulacyjnego zgodności przewodnik, część

numer 68-290-01, na stronie internetowej Extron,

www.extron.com.

Инструкция по технике безопасности • Русский

ПРЕДУПРЕЖДЕНИЕ: Данный символ, , если указан

на продукте, предупреждает пользователя о наличии

неизолированного опасного напряжения внутри корпуса

продукта, которое может привести к поражению

электрическим током.

ВНИМАНИЕ: Данный символ, , если указан на продукте,

предупреждает пользователя о наличии важных инструкций

по эксплуатации и обслуживанию в руководстве,

прилагаемом к данному оборудованию.

Для получения информации о правилах техники безопасности,

соблюдении нормативных требований, электромагнитной

совместимости (ЭМП/ЭДС), возможности доступа и других

вопросах см. руководство по безопасности и соблюдению

нормативных требований Extron на сайте Extron: ,

www.extron.com, номер по каталогу - 68-290-01.

安全说明 • 简体中文

警告：产品上的这个标志意在警告用户该产品机壳内有暴露的危险电压，

有触电危险。

注意：产品上的这个标志意在提示用户设备随附的用户手册中有

重要的操作和维护(维修）说明。

关于我们产品的安全指南、遵循的规范、EMI/EMF 的兼容性、无障碍

使用的特性等相关内容，敬请访问 Extron 网站 , www.extron.com，参见

Extron 安全规范指南，产品编号 68-290-01

。

Trademarks

All trademarks mentioned in this guide are the properties of their respective owners.

The following registered trademarks(

), registered service marks(

), and trademarks(

) are the property of RGBSystems, Inc. or

ExtronElectronics (see the current list of trademarks on the Terms of Use page at www.extron.com):

Registered Trademarks

(

)

Extron, Cable Cubby, ControlScript, CrossPoint, DTP, eBUS, EDID Manager, EDID Minder, Flat Field, FlexOS, Global Configurator,

GlobalScripter, GlobalViewer, Hideaway, HyperLane, IPIntercom, IPLink, KeyMinder, LinkLicense, LockIt, MediaLink, MediaPort, NetPA,

PlenumVault, PoleVault, PowerCage, PURE3, Quantum, SoundField, SpeedMount, SpeedSwitch, SystemINTEGRATOR, TeamWork,

TouchLink, V-Lock, VideoLounge, VN-Matrix, VoiceLift, WallVault, WindoWall, XTP, XTPSystems, and ZipClip

Registered Service Mark

(SM)

: S3 Service Support Solutions

Trademarks

(

™

)

AAP, AFL (Accu-RateFrameLock), ADSP(Advanced Digital Sync Processing), Auto-Image, CableCover, CDRS(ClassD Ripple

Suppression), Codec Connect, DDSP(Digital Display Sync Processing), DMI (DynamicMotionInterpolation), DriverConfigurator,

DSPConfigurator, DSVP(Digital Sync Validation Processing), eLink, EQIP, Everlast, FastBite, FOX, FOXBOX, IP Intercom HelpDesk,

MAAP, MicroDigital, Opti-Torque, ProDSP, QS-FPC(QuickSwitch Front Panel Controller), Room Agent, Scope-Trigger, ShareLink,

Show Me, SIS, SimpleInstructionSet, Skew-Free, SpeedNav, StudioStation, Triple-Action Switching, True4K, Vector™ 4K , WebShare,

XTRA, and ZipCaddy

안전 지침 • 한국어

경고: 이 기호 가 제품에 사용될 경우, 제품의 인클로저 내에 있는

접지되지 않은 위험한 전류로 인해 사용자가 감전될 위험이 있음을

경고합니다.

주의: 이 기호 가 제품에 사용될 경우, 장비와 함께 제공된 책자에 나와

있는 주요 운영 및 유지보수(정비) 지침을 경고합

니다.

안전 가이드라인, 규제 준수, EMI/EMF 호환성, 접근성, 그리고 관련 항목에

대한 자세한 내용은 Extron 웹 사이트(www.extron.com)의 Extron 안전 및

규제 준수 안내서, 68-290-01 조항을 참조하십시오.

安全記事 • 繁體中文

警告: 若產品上使用此符號，是為了提醒使用者，產品機殼內存在著

可能會導致觸電之風險的未絕緣危險電壓。

注意若產品上使用此符號，是為了提醒使用者，設備隨附的用戶手冊中有

重要的操作和維護（維修）説明。

有關安全性指導方針、法規遵守、EMI/EMF 相容性、存取範圍和相關主題的詳細資

訊，請瀏覽 Extron 網站：www.extron.com，然後參閱《Extron 安全性與法規

遵守手冊》，準則編號 68-290-01。

安全上のご注意 • 日本語

警告: この記号が製品上に表示されている場合は、筐体内に絶縁されて

いない高電圧が流れ、感電の危険があることを示しています。

注意:この記号が製品上に表示されている場合は、本機の取扱説明書に

記載されている重要な操作と保守(整備)の指示についてユーザーの注意

を喚起するものです。

安全上のご注意、法規厳守、EMI/EMF適合性、その他の関連項目に

ついては、エクストロンのウェブサイト www.extron.com より『 Extron Safety

and Regulatory Compliance Guide』 ( P/N 68-290-01) をご覧ください。

FCC Class A Notice

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to part15 of the FCC rules. The ClassA limits provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and,

if not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is

likely to cause interference. This interference must be corrected at the expense of the user.

ATTENTION: The Twisted Pair Extension technology works with unshielded twisted

pair (UTP) or shielded twisted pair (STP) cables; but to ensure FCC Class A and CE

compliance, STP cables and STP Connectors are required.

For more information on safety guidelines, regulatory compliances, EMI/EMF

compatibility, accessibility, and related topics, see the “Extron Safety and

Regulatory Compliance Guide” on the Extron website.

Conventions Used in this Guide

Notifications

The following notifications are used in this guide:

WARNING: Potential risk of severe injury or death.

AVERTISSEMENT : Risque potentiel de blessure grave ou de mort.

CAUTION: Risk of minor personal injury.

ATTENTION : Risque de blessuremineure.

ATTENTION:

• Risk of property damage.

• Risque de dommages matériels.

NOTE: A note draws attention to important information.

TIP: A tip provides a suggestion to make working with the application easier.

Software Commands

Commands are written in the fonts shown here:

^AR Merge Scene,,Op1 scene 1,1 ^B 51 ^W^C

[01] R 0004 00300 00400 00800 00600 [02] 35 [17] [03]

E X! *X1&* X2)* X2#* X2! CE}

NOTE: For commands and examples of computer or device responses

mentioned in this guide, the character “0” is used for the number zero and “O”

is the capital letter “o.”

Computer responses and directory paths that do not have variables are written in the font

shown here:

Reply from 208.132.180.48: bytes=32 times=2ms TTL=32

C:\Program Files\Extron

Variables are written in slanted form as shown here:

ping xxx.xxx.xxx.xxx —t

SOH R Data STX Command ETB ETX

Selectable items, such as menu names, menu options, buttons, tabs, and field names are

written in the font shown here:

From the File menu, select New.

Click the OK button.

Specifications Availability

Product specifications are available on the Extron website, www.extron.com.

Extron Glossary of Terms

A glossary of terms is available at http://www.extron.com/technology/glossary.aspx.

Contents

Introduction............................................................ 1

About the DA2 HD 4K,DA4 HD 4K,

and DA6 HD 4K .................................................. 1

Features ............................................................. 1

Application Diagram ........................................... 3

Installation .............................................................. 4

Installation Overview ........................................... 4

Rear Panel Connectors ....................................... 5

Connecting Power .......................................... 6

Connecting the Input Source .......................... 8

Securing the HDMI Connector ........................ 8

Connecting Output Displays ........................... 9

Wiring for RS-232 Control (Optional) ............. 10

Front Panel Features ......................................... 13

Conﬁguration ....................................................... 15

EDID Minder ..................................................... 15

HDCP ............................................................... 16

Output Compatibility Correction ........................ 17

SIS Commands ................................................... 18

Introduction to SIS ........................................... 18

Symbols Used in this Guide .............................. 19

Error Messages ............................................ 20

Command and Response Table

for SIS Commands ........................................... 21

Conﬁguration Software ..................................... 25

Downloading PCS from the Extron Website ...... 25

Using PCS Software ......................................... 26

Overview ...................................................... 26

Input/Output Configuration ........................... 27

EDID Minder ................................................. 28

Device Menu................................................. 28

PCS Help File ............................................... 28

Updating Firmware ........................................... 29

Downloading Firmware to a PC .................... 29

Uploading Firmware to a

DA HD 4K Device ......................................... 29

Mounting ............................................................... 31

Desktop Placement .......................................... 31

Rack Mounting ................................................. 31

UL Guidelines for Rack Mounting .................. 31

Rack Mounting Procedure ............................ 31

Under-desk Mounting ....................................... 31

Extron Warranty .................................................. 32

DA HD 4K Series • Contents vii

DA HD 4K Series • Contents viii

Introduction

This guide describes the function, installation, and operation of the DA2 HD 4K, DA4 HD 4K,

and DA6 HD 4K. Unless otherwise stated, the terms “distribution amplifier” or “DA” refer to any

of these distribution amplifiers.

This section provides the following information:

• About the DA2 HD4K,DA4 HD4K, and DA6 HD4K

• Features

• Application Diagram

About the DA2 HD 4K,DA4 HD 4K, and DA6 HD 4K

The Extron DA HD 4K Series are one input, multiple output HDMI distribution amplifiers for 4K

signals. They distribute one 4K input signal to two (DA2 HD 4K), four (DA4 HD 4K), or six

(DA6 HD 4K) simultaneous outputs. They support data rates up to 10.2 Gbps, including

computer and video resolutions up to 4096x2160 @ 30 Hz and 1080p @ 60 Hz with Deep

Color, 3D, Lip Sync, and HD lossless audio formats.

NOTE: Extron strongly recommends compatibility testing while designing, and before installing

any 3D system. There are several unique 3D formats in use by source devices and display

manufacturers. The level of 3D product support is governed by pixel clock, signal format, and

communication between source and sink devices. For more information, call the Extron S3

Sales and Technical Support Hotline (see contact numbers on the last page).

All three models feature EDID Minder, which maintains continuous EDID communication

between connected devices, and Key Minder, which continuously authenticates HDCP

encryption between all devices, ensuring the simultaneous distribution of source content to all

displays.

The DA HD 4K Series provides automatic input cable equalization (up to 25 feet, 7.62 meters,

for 4K signals), automatic color bit depth adjustment, and allows outputs to be independently

muted.

Front panel LEDs provide immediate confirmation of HDCP authentication and signal presence.

Features

• 4K signal distribution — Distributes 4K HDMI video and embedded multi-channel digital

audio signals. These distribution amplifiers accept one UHD 4K input through a female

HDMI type-A connector and provide two (DA2 HD 4K), four (DA4 HD 4K), or six

(DA6 HD 4K) simultaneous outputs.

• Supports HDMI 1.4 specifications, including:

• Data rates up to 10.2 Gbps

• Deep Color up to 12-bit

• 3D

• Lip Sync

• HD lossless audio formats

• Supports computer and video resolutions up to 4K, including 1080p @ 60 Hz Deep

Color.

DA HD 4K Series • Introduction 1

• EDID Minder — automatically manages EDID communication between connected

devices ensuring that the source powers up properly and reliably outputs content for

display.

• HDCP compliant

• Key Minder continuously verifies HDCP compliance — Key Minder authenticates and

maintains continuous HDCP encryption between all input and output devices to enable

simultaneous distribution of a single source signal to two, four, or six displays.

• HDCP Visual Confirmation — A full-screen green signal is sent when HDCP-encrypted

content is transmitted to a non-HDCP compliant display, providing immediate visual

confirmation that protected content cannot be viewed on the display.

• Automatic input cable equalization — Up to 25 feet (7.62 meters) when used with

Extron HDMI Pro Series cable. Actively conditions incoming HDMI signals to compensate

for signal loss when using long cables, low quality cables, or source devices with poor

signal output.

• Automatic color bit depth management — The DA HD 4K Series automatically adjusts

color bit depth based on the display EDID, preventing color compatibility conflicts between

source and displays.

• HDMI to DVI Interface Format Correction — Automatically reformats HDMI source

signals for output to a connected DVI display.

• Output muting via RS‑232 or USB port — Provides the capability to mute one or all

outputs at any time. This allows content to be viewed on a local monitor prior to appearing

on the main presentation display.

• HDCP authentication and signal presence LED indicators — Front-panel LED

indicators for signal presence and HDCP authentication provide real-time feedback and

monitoring of key performance parameters.

• Easy setup and commissioning with Extron Product Configuration Software (PCS)

— Conveniently configure multiple products using a single software application.

• Easy mounting options — The DA2 HD 4K features a 1 inch(2.5cm) high, quarterrack

width enclosure. The DA4 HD 4K and DA6 HD 4K feature a 1U high, halfrack width

enclosure. All three products can be conveniently mounted in standard racks or under

furniture.

• Includes LockIt HDMI cable lacing brackets — LockIt lacing brackets are used to

secure HDMI cables connected to the HDMI input and output connectors, preventing

accidental disconnection of the cables.

• Provides +5 VDC, 250 mA power on each output for external peripheral devices.

• Worldwide power compatibility — The DA2 HD 4K includes an energy-efficient external

universal power supply. The DA4 HD 4K and DA6 HD 4K are equipped with an

100-240 VAC, 50/60 Hz, internal universal power supply.

DA HD 4K Series • Introduction 2

Application Diagram

Figure 1 shows a typical application for the DA4 HD 4K. The DA2 HD 4K and DA6 HD 4K can

be used in similar applications.

50/60 Hz

100-240V ~ 0.3A MAX

DA4 HD 4K

RS-232

4321

Tx Rx G

REMOTEOUTPUTSINPUT

100

LINK

ACT

COM

INPUT

RELAY

TX RX

IPL 250

OFF

DISPLAY

MUTE

SCREEN

DOWN

VCR

DVD

DOC

CAM

LAPTOP

POWER

SD CARD USB

PLAY STATUS

MODEL 80

Extron

DA4 HD 4K

Distribution

Amplier

HDMI

Cables

RS-232

TCP/IP

TouchLink

Control

System

4K Displays

4K Video Player

Figure 1. DA4 HD 4K Application Diagram

DA HD 4K Series • Introduction 3

Installation

This section provides an overview of the installation of the DA HD 4K series distribution

amplifiers, including the front panel and rear panel connections. Follow the links for more

detailed information elsewhere in the guide.

This section provides the following information:

• Installation Overview

• Rear Panel Connectors

• Front Panel Features

Installation Overview

To install and set up the DA HD 4K series distribution amplifiers, follow these instructions:

1. Mount the unit in a suitable location (see Mounting on page 31).

2. Connect power to the unit:

• DA2 HD 4K — connect the provided 12 VDC power supply to the power connector

(see Connecting Power on page 6).

ATTENTION:

• Do not connect any external power supplies until you have read the

Attention notifications on page 7.

• Ne branchez pas de sources d’alimentation externes avant d’avoir lu les

mises en garde sur la page 7.

• DA4 HD 4K and DA6 HD 4K — connect to a 100-240 VAC (50 or 60 Hz) power

source using the provided IEC power cord (see page 7).

3. Connect the display devices and power them on (see Connecting Output Displays on

page9).

The distribution amplifier automatically reads and stored EDID from the selected display

device. By default, this is the device connected to output 1. For other EDID options, see

EDID Minder on page 15.

4. If configuration using SIS commands is required (see SIS Commands starting on page

18), connect a control PC to the rear panel RS-232, 3-pole captive screw connector (see

Rear panel RS‑232 connector on page10) or the front panel USB port (see Front

panel USB port on page11).

5. Connect and power on the input device (see Connecting the Input Source on page 8).

DA HD 4K Series • Installation 4

Rear Panel Connectors

This section provides information about the rear panel connectors:

RS-232

Tx Rx G

1 2

INPUT

REMOTE

OUTPUTS

POWER

12V

0.4A MAX

RS-232

Tx Rx G

1 2

INPUT

REMOTE

OUTPUTS

POWER

12V

0.4A MAX

50/60 Hz

100-240V ~ 0.3A MAX

DA4 HD 4K

RS-232

4321

Tx Rx G

REMOTEOUTPUTSINPUT

50/60 Hz

100-240V ~ 0.3A MAX

DA4 HD 4K

RS-232

4321

Tx Rx G

REMOTEOUTPUTSINPUT

50/60 Hz

100-240V ~ 0.3A MAX

DA6 HD 4K

RS-232

43 6521

Tx Rx G

OUTPUTS REMOTEINPUT

50/60 Hz

100-240V ~ 0.3A MAX

DA6 HD 4K

RS-232

43 6521

Tx Rx G

OUTPUTS REMOTEINPUT

CC DD EE

D EECCBB

Figure 2. Rear Panel Connectors

Power supply connector (DA2 HD 4K only)

IEC cable connector (DA4 HD 4K and DA6 HD 4K

)

HDMI input connector

HDMI output connectors

RS‑232 connector

DA HD 4K Series • Installation 5

SECTION A–A

Ridges

Smooth

3/16"

(5 mm) Max.

POWER

12V

0.3A MAX

Connecting Power

DA2 HD 4K

Power supply connector — connect the provided 12 VDC,

1.0 A power supply to the rear panel power supply socket

(see figure 2 on the previous page).

WARNING: The two power cord wires must be kept

separate while the power supply is plugged in. Remove

power before wiring.

AVERTISSEMENT: Les deux cordons d’alimentation

doivent être tenus à l’écart l’un de l’autre quand

l’alimentation est branchée. Couper l’alimentation avant

de faire l’installation électrique.

ATTENTION:

• Do not connect any external power supplies until you

have read the Attention notifications on page 7.

• Ne branchez pas de sources d’alimentation externes

avant d’avoir lu les mises en garde sur la page 7.

1. Cut the DC output cord to the length needed.

2. Strip the jacket to expose 3/16 inch (5 mm) of the

conductor wire.

ATTENTION:

• The length of the exposed wires in the stripping process is critical. The ideal

length is 3/16 inches (5 mm). Any longer and the exposed wires may touch,

causing a short circuit between them. Any shorter and the wires can be

easily pulled out even if tightly fastened by the captive screws.

• La longueur des câbles exposés est primordiale lorsque l’on entreprend de

les dénuder. La longueur idéale est de 5mm (3/16inches). S’ils sont un peu

plus longs, les câbles exposés pourraient se toucher et provoquer un court

circuit. S’ils sont un peu plus courts, ils pourraient sortir, même s’ils sont

attachés par les vis captives.

3. Ensure the connections have the correct polarity as shown in the figure above.

4. Slide the exposed end of the wire into the captive screw connector and secure by

tightening the screw.

5. Use the supplied tie wrap to strap the power cord to the extended tail of the

connector.

DA HD 4K Series • Installation 6

ATTENTION:

• Always use a power supply provided by or speciﬁed by Extron. Use of an

unauthorized power supply voids all regulatory compliance certiﬁcation and may

cause damage to the supply and the end product.

• Utilisez toujours une source d’alimentation fournie ou recommandée par Extron.

L’utilisation d’une source d’alimentation non autorisée annule toute conformité

réglementaire et peut endommager la source d’alimentation ainsi que le produit ﬁnal.

• These products are intended for use with a UL Listed power source marked “Class 2”

or “LPS” and rated 12VDC, minimum 0.5 A.

• Ces produits sont destiné à une utilisation avec une source d’alimentation listéeUL

avec l’appellation «Classe2» ou «LPS» et normée 12Vcc, 0.5A minimum.

• Extron power supplies are certiﬁed to UL/CSA 60950-1 and are classiﬁed as LPS

(Limited Power Source). Use of a non-LPS or unlisted power supply will void all

regulatory compliance certiﬁcation.

• Les sources d’alimentation Extron sont qualiﬁées UL/CSA60950-1 et sont

classéesLPS(LimitedPowerSource). L’utilisation d’une source d’alimentation non-

listée ou non-listéeLPS annulera toute certiﬁcation de conformité réglementaire.

• Unless otherwise stated, the AC/DC adapters are not suitable for use in air handling

spaces or in wall cavities. The power supply is to be located within the same vicinity

as the Extron AV processing equipment in an ordinary location, Pollution Degree 2,

secured to the equipment rack within the dedicated closet, podium, or desk.

• Sauf mention contraire, les adaptateurs AC/DC ne sont pas appropriés pour une

utilisation dans les espaces d’aération ou dans les cavités murales. La source

d’alimentation doit être située à proximité de l’équipement de traitement audiovisuel

dans un endroit ordinaire, avec un degré2 de pollution, ﬁxé à un équipement de rack

à l’intérieur d’un placard, d’une estrade, ou d’un bureau.

• The installation must always be in accordance with the applicable provisions of

National Electrical Code ANSI/NFPA 70, article 725 and the Canadian Electrical Code

part 1, section 16.

• Cette installation doit toujours être en accord avec les mesures qui s’applique au

National Electrical Code ANSI/NFPA70, article725, et au Canadian Electrical Code,

partie1, section16.

• The power supply shall not be permanently ﬁxed to building structure or similar

structure.

• La source d’alimentation ne devra pas être ﬁxée de façon permanente à une structure

de bâtiment ou à une structure similaire.

• Do not tin the wire leads before installing into the connector. Tinned wires are not as

secure in the connector and could be pulled out. They may also break after being

bent several times.

• Ne pas étamer les conducteurs avant de les insérer dans le connecteur. Les câbles

étamés ne sont pas aussi bien ﬁxés dans le connecteur et pourraient être retirés. Ils

peuvent aussi se casser après avoir été pliés plusieurs fois.

DA4 HD 4K and DA6 HD 4K

IEC cable connector — use the provided female IEC cable to connect the female

IECconnector to a 100-240VAC (50or 60 Hz) power source (see figure 2 on page 5).

DA HD 4K Series • Installation 7

Connecting the Input Source

HDMI input connector — use HDMI cable to connect the input source to the rear panel

female HDMI connector (see figure 2,

on page 5).

The input follows HDMI 1.4 specifications, supporting data rates up to 3.4 Gbps per color

and is fully HDCP compliant.

The input can equalize up to 100 feet (30.48 m) of HDMI Pro cable with a 1.65 Gbps per

color signal or 25 feet (7.52 m) with a 3.4 Gbps per color signal.

EDID is stored on an EEPROM, and Hot-Plug Detect (HPD) is actively controlled by EDID

Minder (see page 15).

Securing the HDMI Connector

Follow these instructions to secure the input and output connectors to the distribution

amplifier with the LockIt HDMI lacing bracket provided:

1. Plug the HDMI cable into the panel

connection (

2. Loosen the HDMI connection mounting

screw from the panel enough to allow the

LockIt lacing bracket to be placed over

it (

). The screw does not have to be

removed.

3. Place the LockIt lacing bracket on the screw

and against the HDMI connector, then tighten

the screw to secure the bracket (

ATTENTION:

• Do not overtighten the connector

mounting screw. The shield it fastens

to is very thin and can easily be

stripped.

• Ne serrez pas trop la vis de montage

du connecteur. Le blindage auquel

elle est attachée est très ﬁn et peut

facilement être dénudé.

4. Loosely place the included tie wrap around the HDMI connector and the LockIt lacing

bracket as shown (

5. While holding the connector securely against the lacing bracket, tighten the tie wrap,

then remove any excess length.

DA HD 4K Series • Installation 8

Connecting Output Displays

HDMI output connectors — use a UHD 4K cable to connect up to six output displays

to the female HDMI sockets on the rear panel (see figure 2,

on page 5).

NOTE: Secure the input and output connectors to the distribution amplifier with the

provided LockIt HDMI lacing bracket (see Securing the HDMI Connector, on the

previous page).

By default, the EDID is set to 720p @ 60 Hz with 2-channel audio. However, EDID can be

changed by using SIS commands (see the EDID Minder command on page 23) or by

using PCS software (see page 28).

In addition to 12 factory-loaded EDIDs, there are six slots that are automatically populated

by EDID from connected sink devices and two slots that can be manually populated by

the user. For more information, see the EDID Minder table on page 15.

The distribution amplifier monitors the EDID of each connected display to ensure it is

compatible with the current input signal. The following adjustments are made for each

output independently:

• Interface format — If the connected display is DVI and the input signal is HDMI, the

signal is reformatted to DVI. If the output is HDMI and the input is DVI, no reformatting

is needed because HDMI is backwards compatible with DVI.

• Video color bit depth — If the connected output device does not support the color

bit depth of the input signal, it is truncated down to the next level that is supported

(12-bit>10-bit > 8-bit). The signal can be forced to always truncate to 8-bit via SIS

commands, disabling deep color.

• Audio — If the connected output device does not support the audio format of the

input signal, audio is muted.

If the source requires HDCP encryption and the display is not HDCP compliant, that

output channel outputs a green screen.

Both outputs carry +5 VDC and up to 250 mA on pin 18, regulated by a current limiting

circuit.

DA HD 4K Series • Installation 9

Wiring for RS-232 Control (Optional)

Rear panel RS-232 connector

RS‑232 connector — use RS-232 communication between the distribution amplifier and

a host PC to update firmware or configure the unit using SIS commands (see Command

and Response Table for SIS Commands starting on page 21).

Extron recommends Extron universal control cable (see www.extron.com).

NOTES:

• You can connect the computer to either the rear panel 3-pole RS-232 port (see

figure 2,

on page 5) or the front panel USB port (see figure 7,

page 13) of the distribution ampliﬁer.

• Neither port has precedence and commands from either port are handled in the

order they are received.

• Extron recommends that the USB port is used for temporary connections. If a

permanent connection is required, the RS-232 port should be used.

RS-232

Tx Rx G

REMOTE

TransmitReceive

ReceiveTransmit

GroundGround

DB9 Pin Locations

Female

Pin 2 = Rx

Pin 3 = Tx

Pin 5 = G

Computer DA2 HD 4K

Figure 3. Wiring for Rear Panel RS‑232 Control

NOTES:

• The wiring in the RS-232 cables crosses over so that the Tx on the distribution

ampliﬁer connects to the Rx of the control device and vice versa. Ground always

connects to ground.

• If you use cable that has a drain wire, tie the drain wire to the ground at both

ends.

To connect the distribution amplifier to a computer, follow these instructions:

1. Connect an RS-232 cable with a female 9-pin D connector to the computer (see

figure 3 above):

• Data received by the computer = pin 2

• Data transmitted by the computer = pin 3

• Ground = pin 5

2. Wire the opposite end of the cable to the provided 3-pole captive screw plug (see

figure3 above):

• Data transmitted by the DA plugs into the Tx (transmit) port

• Data received by the DA plugs into the Rx (receive) port

• Ground plugs into the G (ground) port

DA HD 4K Series • Installation 10

Front panel USB port

Use the mini Type B USB port on the front panel (see figure 4 below) to connect the

distribution amplifier to a host computer for updating firmware or to configure the unit with SIS

commands.

1. Connect a USB A to mini B cable between the front panel USB Config port and a USB

port of the PC.

DA6 HD 4K

DISTRIBUTION AMPLIFIER

CONFIG

HDCP

1234

SIGNAL

INPUT OUTPUTS

EDID

WiFi

1234

USB

Ports

USB Cable

Type A

USB

Mini Type B

USB

Figure 4. Connecting a PC to the DA6 HD 4K Front Panel USB Port

2. If this is the first time the distribution amplifier has been connected to the PC, the

Found New Hardware Wizard window opens. The first screen offers to connect to

Windows Update to search the web for the appropriate driver needed for the USB port

to communicate with the distribution amplifier. This is not necessary if the USB driver is

already on your PC.

Figure 5. Found New Hardware Wizard Welcome Screen

DA HD 4K Series • Installation 11

• Select Yes, this time only to connect the PC to Windows Update only this

time (see figure 5 on the previous page).

• Select Yes, now, and every time I connect a device to automatically

connect to Windows Update every time the DA HD 4K device connects to this USB

port.

• Select No, not this time if you do not want to connect to Windows Update (for

example, if the driver is already on the PC).

3. Click Next. The next screen of the Wizard opens (see figure 6):

Figure 6. Installing the Software Automatically

4. Select Install the software automatically (Recommended) and click Next

(see figure 6).

NOTE: You do not need to insert an installation disc.

The PC locates the driver needed and installs it in the correct location on the hard drive.

5. When the Completed screen appears, click Finish to close the wizard.

NOTE: The wizard opens only on the first occasion you connect the distribution

amplifier to that USB port. The wizard reappears if you connect the unit to a

different USB port or if you connect a different piece of equipment, requiring a

different driver, to the same USB port.

6. Configure the distribution amplifier as required (see Configuration Software, starting on

page 25).

DA HD 4K Series • Installation 12

La page charge ...

Extron DA HD 4K Series Manuel utilisateur

Marque: Extron

Modèle: DA HD 4K Series

Catégorie: Commutateurs vidéo

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: Extron DA HD 4K Series User manual

Extron DA HD 4K Series Manuel utilisateur

Extron DA HD 4K Series Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents