Extron MPA 152 Plus Manuel utilisateur
- Catégorie
- Amplificateurs audio
- Taper
- Manuel utilisateur
68-1320-03 Rev. C
12 20
ENERGY STAR
®
Qualified Stereo Mini Power Amplifier
MPA 152 Plus
User Guide
Audio
Safety Instructions • English
WARNING: This symbol, , when used on the product, is intended to
alert the user of the presence of uninsulated dangerous voltage within the
product’s enclosure that may present a risk of electric shock.
ATTENTION: This symbol, , when used on the product, is intended
to alert the user of important operating and maintenance (servicing)
instructions in the literature provided with the equipment.
For information on safety guidelines, regulatory compliances, EMI/EMF
compatibility, accessibility, and related topics, see the Extron Safety and
Regulatory Compliance Guide, part number 68-290-01, on the Extron
website, www.extron.com.
Sicherheitsanweisungen • Deutsch
WARNUNG: Dieses Symbol auf dem Produkt soll den Benutzer darauf
aufmerksam machen, dass im Inneren des Gehäuses dieses Produktes
gefährliche Spannungen herrschen, die nicht isoliert sind und die einen
elektrischen Schlag verursachen können.
VORSICHT: Dieses Symbol auf dem Produkt soll dem Benutzer
in der im Lieferumfang enthaltenen Dokumentation besonders wichtige
Hinweise zur Bedienung und Wartung (Instandhaltung) geben.
Weitere Informationen über die Sicherheitsrichtlinien, Produkthandhabung,
EMI/EMF-Kompatibilität, Zugänglichkeit und verwandte Themen finden Sie
in den Extron-Richtlinien für Sicherheit und Handhabung (Artikelnummer
68-290-01) auf der Extron-Website, www.extron.com.
Instrucciones de seguridad • Español
ADVERTENCIA: Este símbolo, , cuando se utiliza en el producto,
avisa al usuario de la presencia de voltaje peligroso sin aislar dentro del
producto, lo que puede representar un riesgo de descarga eléctrica.
ATENCIÓN: Este símbolo, , cuando se utiliza en el producto,
avisa al usuario de la presencia de importantes instrucciones de uso y
mantenimiento recogidas en la documentación proporcionada con el
equipo.
Para obtener información sobre directrices de seguridad, cumplimiento
de normativas, compatibilidad electromagnética, accesibilidad y
temas relacionados, consulte la Guía de cumplimiento de normativas
y seguridad de Extron, referencia 68-290-01, en el sitio Web de Extron,
www.extron.com.
Instructions de sécurité • Français
AVERTISSEMENT : Ce pictogramme, , lorsqu’il est utilisé sur le
produit, signale à l’utilisateur la présence à l’intérieur du boîtier du
produit d’une tension électrique dangereuse susceptible de provoquer
un choc électrique.
ATTENTION : Ce pictogramme, , lorsqu’il est utilisé sur le produit,
signale à l’utilisateur des instructions d’utilisation ou de maintenance
importantes qui se trouvent dans la documentation fournie avec le matériel.
Pour en savoir plus sur les règles de sécurité, la conformité à la
réglementation, la compatibilité EMI/EMF, l’accessibilité, et autres sujets
connexes, lisez les informations de sécurité et de conformité Extron, réf.
68-290-01, sur le site Extron, www.extron.com.
Istruzioni di sicurezza • Italiano
AVVERTENZA: Il simbolo, , se usato sul prodotto, serve ad
avvertire l’utente della presenza di tensione non isolata pericolosa
all’interno del contenitore del prodotto che può costituire un rischio di
scosse elettriche.
ATTENTZIONE: Il simbolo, , se usato sul prodotto, serve ad
avvertire l’utente della presenza di importanti istruzioni di funzionamento e
manutenzione nella documentazione fornita con l’apparecchio.
Per informazioni su parametri di sicurezza, conformità alle normative,
compatibilità EMI/EMF, accessibilità e argomenti simili, fare riferimento
alla Guida alla conformità normativa e di sicurezza di Extron, cod. articolo
68-290-01, sul sito web di Extron, www.extron.com.
Instrukcje bezpieczeństwa • Polska
OSTRZEŻENIE: Ten symbol, , gdy używany na produkt, ma na celu
poinformować użytkownika o obecności izolowanego i niebezpiecznego
napięcia wewnątrz obudowy produktu, który może stanowić zagrożenie
porażenia prądem elektrycznym.
UWAGI: Ten symbol, , gdy używany na produkt, jest przeznaczony do
ostrzegania użytkownika ważne operacyjne oraz instrukcje konserwacji
(obsługi) w literaturze, wyposażone w sprzęt.
Informacji na temat wytycznych w sprawie bezpieczeństwa, regulacji wzajemnej
zgodności, zgodność EMI/EMF, dostępności i Tematy pokrewne, zobacz Extron
bezpieczeństwa i regulacyjnego zgodności przewodnik, część numer 68-290-01,
na stronie internetowej Extron, www.extron.com.
Инструкция по технике безопасности • Русский
ПРЕДУПРЕЖДЕНИЕ: Данный символ, , если указан на
продукте, предупреждает пользователя о наличии неизолированного
опасного напряжения внутри корпуса продукта, которое может
привести к поражению электрическим током.
ВНИМАНИЕ: Данный символ, , если указан на продукте,
предупреждает пользователя о наличии важных инструкций по
эксплуатации и обслуживанию в руководстве, прилагаемом к
данному оборудованию.
Для получения информации о правилах техники безопасности, соблюдении
нормативных требований, электромагнитной совместимости (ЭМП/ЭДС),
возможности доступа и других вопросах см. руководство по безопасности и
соблюдению нормативных требований Extron на сайте Extron: ,
www.extron.com, номер по каталогу - 68-290-01.
安全说明 • 简体中文
警告： 产品上的这个标志意在警告用户该产品机壳内有暴露的危险 电压，
有触电危险。
注意： 产品上的这个标志意在提示用户设备随附的用户手册中有
重要的操作和维护(维修）说明。
关于我们产品的安全指南、遵循的规范、EMI/EMF 的兼容性、无障碍
使用的特性等相关内容，敬请访问 Extron 网站 , www.extron.com，参见 Extron
安全规范指南，产品编号 68-290-01
。
Safety Instructions
安全記事 • 繁體中文
警告: 若產品上使用此符號，是為了提醒使用者，產品機殼內存在著
可能會導致觸電之風險的未絕緣危險電壓。
注意 若產品上使用此符號，是為了提醒使用者，設備隨附的用戶手冊中有
重 要 的 操 作 和 維 護（ 維 修 ）説 明 。
有關安全性指導方針、法規遵守、EMI/EMF 相容性、存取範圍和相關主題的詳細
資訊，請瀏覽 Extron 網站：www.extron.com，然後參閱《Extron 安全性與
法規遵守手冊》，準則編號 68-290-01。
安全上のご注意
• 日本語
警告: この記号 が製品上に表示されている場合は、筐体内に絶縁されて
いない高電圧が流れ、感電の危険があることを示しています。
注意:この記号 が製品上に表示されている場合は、本機の取扱説明書に
記載されている重要な操作と保守(整備)の指示についてユーザーの注意
を喚起するものです。
安全上のご注意、法規厳守、EMI/EMF適合性、その他の関連項目に
つ い て は 、エ ク スト ロ ン の ウェ ブ サ イト www.extron.com よ り 『 Extron Safety
and Regulatory Compliance Guide』 ( P/N 68-290-01) をご覧ください。
안전 지침 • 한국어
경고: 이 기호 가 제품에 사용될 경우, 제품의 인클로저 내에 있는
접지되지 않은 위험한 전류로 인해 사용자가 감전될 위험이 있음을
경고합니다.
주의: 이 기호 가 제품에 사용될 경우, 장비와 함께 제공된 책자에 나와
있는 주요 운영 및 유지보수(정비) 지침을 경고합
니다.
안전 가이드라인, 규제 준수, EMI/EMF 호환성, 접근성, 그리고 관련 항목에 대한
자세한 내용은 Extron 웹 사이트(www.extron.com)의 Extron 안전 및 규제 준수
안내서, 68-290-01 조항을 참조하십시오.
Copyright
© 2013 - 2020 Extron. All rights reserved.
Trademarks
All trademarks mentioned in this guide are the properties of their respective owners.
The following registered trademarks®, registered service marks(SM), and trademarks(TM) are the property of RGBSystems, Inc. or Extron (see the
current list of trademarks on the Terms of Use page at www.extron.com):
Registered Trademarks
(
®
)
Extron, Cable Cubby, ControlScript, CrossPoint, DTP, eBUS, EDID Manager, EDID Minder, eLink, Flat Field, FlexOS, Glitch Free,
Global Configurator, Global Scripter, GlobalViewer, Hideaway, HyperLane, IPIntercom, IPLink, Key Minder, LinkLicense, LockIt, MediaLink,
MediaPort, NAV, NetPA, PlenumVault, PoleVault, PowerCage, PURE3, Quantum, ShareLink, Show Me, SoundField, SpeedMount, SpeedSwitch,
StudioStation, SystemINTEGRATOR, TeamWork, TouchLink, V-Lock, VideoLounge, VN-Matrix, VoiceLift, WallVault, WindoWall, XPA, XTP,
XTP Systems, and ZipClip.
Registered Service Mark
(SM)
: S3 Service Support Solutions
Trademarks
(
™
)
AAP, AFL (Accu-Rate Frame Lock), ADSP (Advanced Digital Sync Processing), AVEdge, CableCover, CDRS (Class D Ripple Suppression),
Codec Connect, DDSP (Digital Display Sync Processing), DMI (Dynamic Motion Interpolation), DriverConfigurator, DSPConfigurator, DSVP
(Digital Sync Validation Processing), EQIP, Everlast, FastBite, Flex55, FOX, FOXBOX, IP Intercom HelpDesk, MAAP, MicroDigital, Opti-Torque,
PendantConnect, ProDSP, QS-FPC (QuickSwitch Front Panel Controller), Room Agent, Scope-Trigger, SIS, Simple Instruction Set, Skew-Free,
SpeedNav, Triple-Action Switching, True4K, True8K, Vector™ 4K, WebShare, XTRA, and ZipCaddy
FCC Class B Notice
NOTE: This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) This
device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part15 of the FCC rules. These limits provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. There is no guarantee that interference will not
occur. If this equipment does cause interference to radio or television reception, which can
be determined by turning the equipment off and on, you are encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
In order to maintain compliance with FCC regulations, shielded cables must be used with this
equipment. Operation with non-approved equipment or unshielded cables is likely to result in
interference to radio and TV reception. The user is cautioned that changes and modifications
made to the equipment without the approval of the manufacturer could void the user’s authority
to operate this equipment.
NOTE: For more information on safety guidelines, regulatory compliances, EMI/EMF
compatibility, accessibility, and related topics see the Extron Safety and Regulatory
Compliance Guide on the Extron website.
Battery Notice
This product contains a battery. Do not open the unit to replace the battery. If the
battery needs replacing, return the entire unit to Extron (for the correct address, see the Extron
Warranty section on the last page of this guide).
CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used
batteries according to the instructions.
ATTENTION : Risque d’explosion. Ne pas remplacer la pile par le mauvais type de pile.
Débarrassez-vous des piles utilisées selon le mode d’emploi.
Conventions Used in this Guide
Notifications
In this user guide, the following are used:
WARNING: Potential risk of severe injury or death.
AVERTISSEMENT : Risque potentiel de blessure grave ou de mort.
CAUTION: Risk of minor personal injury.
ATTENTION : Risque de blessuremineure.
ATTENTION:
•
Risk of property damage.
• Risque de dommages matériels.
NOTE: A note draws attention to important information.
Specifications Availability
Product specifications are available on the Extron website, www.extron.com.
Extron Glossary of Terms
A glossary of terms is available at www.extron.com/technology/glossary.aspx.
Contents
Introduction............................................................ 1
Important Safety Instructions ...................................1
About the MPA 152 Plus .........................................2
MPA 152 Plus Features ........................................... 2
Panels and Cabling .............................................. 4
MPA 152 Plus Rear Panel Features .........................4
Power Connector ................................................4
Audio Inputs ........................................................6
Remote Control ...................................................7
Audio Output ......................................................9
Setup and Operation .......................................... 10
Front Panel Features and Operation ......................10
Setting Input Level ............................................11
Setting Bass and Treble ....................................11
Remote Control Options........................................12
Defeating the Auto Power-down Timer ..................13
Troubleshooting ....................................................14
Amplifier Fails to Exit Standby Mode Promptly ...14
Amplifier Enters Standby Mode Too Early ..........14
Mounting ............................................................... 15
Rack Mounting ......................................................15
UL Guidelines for Rack Mounting ......................15
Rack Mounting Procedure .................................16
Back of the Rack Mounting ............................... 16
Other Mounting Options ........................................ 17
MPA 152 Plus • Contents vii
MPA 152 Plus • Contents viii
Introduction
This manual contains information about the Extron MPA 152 Plus mini power amplifier with
instructions for experienced installers on how to install, configure, and operate the equipment.
Unless otherwise specified, in this manual “amplifier” or “MPA” refer to the MPA152 Plus.
This section provides the following information:
• Important Safety Instructions
• About the MPA 152 Plus
• MPA 152 Plus Features
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the instructions of the
manufacturer.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two blades
and a third grounding prong. The wide blade or the third prong are provided for safety. If
the provided plug does not fit into the outlet, consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11. Only use attachments or accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as if the power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally, or has been dropped.
MPA 152 Plus • Introduction 1
About the MPA 152 Plus
The MPA 152 Plus is an ENERGY STAR qualified amplifier with an Extron exclusive, highly
efficient, advanced Class D amplifier design. It also features patented CDRS (Class D Ripple
Suppression) technology that provides a smooth, clean audio waveform and an improvement
in signal fidelity over conventional Class D amplifiers. The high efficiency design generates very
little heat and allows the amplifier to be fanless and operated in environments with little or no
ventilation.
This stereo integrated mini power amplifier delivers up to 15watts(rms) per channel stereo or
dual mono into a 4 ohm sound system, or 8watts(rms)per channel into an 8ohm system. This
model features a 90 dB signal-to-noise ratio with 0.1% THD+N, offering exceptional performance
for speaker systems requiring compact, economical, audio amplification.
Front panel controls allow easy adjustment of bass and treble volume and input level.
The quarter rack size allows a variety of mounting options. The unit complies with UL 2043 for
smoke and heat release for in-the-ceiling installations. It can be installed in the plenum space of
the ceiling. Alternatively, the units can be mounted on a tabletop, in a rack, under a desk, or in a
projector mounting kit.
Extron
C
ONFIG
DISPLAY
VOLUME
1
2
3
4
ON
O
FF
MLC 104 IP PLUS
VID
EO
AU
X
VID
EO
PC
IMAGE
MU
TE
POWER
12V
0.7A MAX
4
Ω
8
Ω
CLASS 2
WIRING
L
R
L
R
V C G
10V
50mA
L
MPA 152 Plus
R
/
INPUTS
OUTPUT REMOTE
Extron
MPA 152 Plus
Mini Power
Amplier
RGBHV
S-Video
Audio
Audio
Audio
Audio
Video
DVD/VCR
Combo
Laptop
Projector
RS-232 or
IR Projector
control
Extron
MLC 104 IP Plus
MediaLink
Controller
with IP Link
Extron
SM 3
Full-range
Speakers
Figure 1. Typical Application for the MPA 152 Plus
MPA 152 Plus Features
30 watts (rms) output power — Delivers up to 15watts(rms) per channel, stereo or dual
mono, into a 4 ohm speaker system or up to 8watts(rms) per channel into an 8ohm system.
Provides significant audio output for small integration projects with moderate sound system
needs.
Improved signal-to-noise ratio — The 90 dB unweighted signal-to-noise ratio allows very
low-noise operation, ensures quiet, hiss-free amplification, and maintains audio signal integrity.
ENERGY STAR qualified amplifier — The MPA 152 Plus conserves energy and reduces
operating costs.
Defeatable auto power-down timer for 24/7 applications — Ensures that the amplifier is
always active for 24/7 operation in critical applications, while still retaining the ENERGYSTAR
qualification.
MPA 152 Plus • Introduction 2
Extron patented CDRS - Class D Ripple Suppression — CDRS is an Extron patented
technology that provides a smooth, clean audio waveform and an improvement in signal fidelity
over conventional Class D amplifier designs. CDRS eliminates the high frequency switching ripple
characteristic of Class D amplifiers, a source of RF emissions which can interfere with sensitive
AV equipment such as wireless microphones.
Front panel bass, treble, and input level controls — These are flush mounted and detented.
They allow quick attenuation of input signal and ±10 dB bass and treble shelving controls.
Stereo or Dual Mono toggle switch — Allows the user to choose between stereo output or to
sum the left and right inputs and produce dual mono outputs (see figure 7 on page 9). This
eliminates the need for external summing products in monoaural installations.
UL 2043 plenum rated — The MPA 152 Plus complies with UL 2043 for smoke and heat
release for installation within a plenum airspace above a drop ceiling (power supply excluded).
Above-the-ceiling placement conceals the amplifier to prevent theft, and is convenient for
installing equipment when space inside the room is limited.
Three audio inputs — Accept balanced or unbalanced stereo line-level signals on a captive
screw connector and unbalanced stereo line-level signals on an RCA stereo pair, and a 3.5 mm
stereo mini jack. This ensures the amplifier can be easily integrated with a wide variety of sources
and projectors.
The three stereo inputs are individually buffered and can be connected to three separate sources
at the same time without altering performance.
Auto power-down with fast power-up — The MPA 152 Plus meets ENERGY STAR
qualification requirements with an auto power-down feature that automatically places the
amplifier into standby after 25 minutes of inactivity, dramatically reducing power consumption. It
quickly returns to full power status in less than one second upon signal detection. This feature
can be defeated to allow for 24/7 operation.
Quick-plug speaker outputs — Speaker output is on a screw-lock captive screw connector
for quick installation.
Volume and mute remote control — A rear panel, three-pin captive screw remote input
connector allows remote adjustment of volume and muting.
Always-on clip limiting — Reduces gain automatically to prevent amplifier clipping.
Compact size — The amplifiers are housed in a 1U high, 3 inch deep, quarter rack wide metal
enclosure, which offers flexible mounting options.
MPA 152 Plus • Introduction 3
Panels and
Cabling
This section discusses the MPA 152 Plus rear panel features and cabling.
MPA 152 Plus Rear Panel Features
The rear panel of the MPA 152 Plus (shown in figure 2 below) allows the user to connect power
(see below), Audio Inputs (see page 6), Remote Control (see page 7), and Audio
Output (see page 9).
POWER
12V
0.7A MAX
LR
L
8Ω / 4Ω
CLASS 2
WIRING
R
10V
VCG
50mA
L
MPA 152 Plus
R
INPUTS
OUTPUTS
REMOTE
A
A
AB
B
BC
C
CD
D
DE
EEFF
F
Figure 2. MPA 152 Plus Rear Panel Features
A
Power Connector
D
Captive screw input (see page 6)
B
RCA connectors (see page 6)
E
Remote control connectors (see page 7)
C
Stereo jack input (see page 6)
F
Speaker connectors (see page 9)
Power Connector
A
Power connector — The MPA152 Plus ships with an Extron 24 W desktop power supply.
The power cord connectors are correctly wired when shipped. Connect the pre-wired
captive screw connector to the power receptacle on the amplifier (see figure 3 on
page 6).
MPA 152 Plus • Panels and Cabling 4
ATTENTION:
•
Always use a power supply supplied by or specified by Extron. Use of an unauthorized
power supply voids all regulatory compliance certification and may cause damage to the
supply and the end product.
• Utilisez toujours une source d’alimentation fournie ou recommandée par Extron.
L’utilisation d’une source d’alimentation non autorisée annule toute certification de
conformité réglementaire, et peut endommager la source d’alimentation et l’unité.
• Suitable for use in environmental air space in accordance with Section300.22.C of the
National Electrical Code, and Sections 2-128, 12-010(3) and 12-100 of the Canadian
Electrical Code, Part 1, C22.1.
• Convient à une utilisation dans les conduits d’aération, en accord avec la section
300.22.C du code national d’électricité américain, et avec les sections 2-128, 12-010(3)
et 12-100 du code d’électricité canadien, partie 1, C22.1.
• Unless otherwise stated, the AC/DC adapters are not suitable for use in air handling
spaces or in wall cavities. The power supply is to be located within the same vicinity as
the Extron AV processing equipment in an ordinary location, Pollution Degree 2, secured
to the equipment rack within the dedicated closet, podium, or desk.
• Sauf mention contraire, les adaptateurs CA/CC ne conviennent pas à une utilisation
dans les espaces d’aération ou dans les cavités murales. La source d’alimentation doit
être placée à proximité de l’équipement Extron dans un emplacement ordinaire soumis
à un degré de pollution de catégorie II, solidement fixé au rack d’équipement d’une baie
technique, d’un pupitre, ou d’un bureau.
• Although the amplifier is plenum rated, the power supply provided with it is not. The
power supply must not be placed in the plenum space. Cables to and from the amplifier
must also be plenum rated. The DC power cord provided with the unit is not plenum
rated.
• Bien que l’amplificateur soit conforme à la norme relative aux faux plafonds, la source
d’alimentation fournie avec ne l’est pas. La source d’alimentation ne doit pas être
placée dans l’espace plenum. Les câbles depuis et vers l’amplificateur doivent aussi
être classés plenum. Le cordon d’alimentation CC fourni avec l’unité n’est pas classé
plenum.
• The installation must always be in accordance with the applicable provisions of National
Electrical Code ANSI/NFPA 70, article 725 and the Canadian Electrical Code part1,
section 16.
• Cette installation doit toujours être conforme aux dispositions applicables du Code
américain de l’électricité (National Electrical Code) ANSI/NFPA 70, article 725, et du
Code canadien de l’électricité, partie1, section16.
• The power supply shall not be permanently fixed to building structure or similar
structure.
• La source d’alimentation ne devra pas être fixée de façon permanente à la structure de
bâtiment ou à d’autres structures similaires.
• The length of the exposed wires in the stripping process is critical. The ideal length is
3/16 inches (5 mm). Any longer and the exposed wires may touch, causing a short
circuit between them. Any shorter and the wires can be easily pulled out even if tightly
fastened by the captive screws.
• La longueur des câbles exposés est primordiale lorsque l’on entreprend de les dénuder.
La longueur idéale est de 5mm (3/16inches). S’ils sont trop longs, les câbles exposés
pourraient se toucher et provoquer un court-circuit. S’ils sont trop courts, ils peuvent
être tirés facilement, même s’ils sont correctement serrés par les borniers à vis.
NOTE: Do not tin the wires. Tinned wire does not hold its shape and can become loose
over time.
MPA 152 Plus • Panels and Cabling 5
AC Power Cord
POWER
12V
0.7A MAX
Power
Receptacle
DC Power Cord
Captive Screw
Connector
MPA 152 Plus
Amplifier
Tie
Wrap
External Power Supply
(12 VDC, 2.0 A)
Ground all
Devices
Ground
+12 VDC input
G
3/16"
(5 mm) Max.
Ridges
Smooth
AA
SECTION A–A
POWER
12V
0.7A MAX
Power Supply
Output Cord
Figure 3. Power Connector
Audio Inputs
Use the rear panel receptacles (see figure 4) to connect audio sources to the amplifier. Wire the
connectors as shown below.
BBBC
CCDDD
L
R
L
R
INPUTS
Figure 4. Audio Inputs
B
RCA unbalanced stereo input connectors — These receptacles accept unbalanced, line
level audio signals. The input can be stereo, using two RCA connectors, or mono, using a
single RCAconnector plugged into the left receptacle.
If unused, the receptacles automatically terminate to lower the noise floor.
figure 3
RCA connectors
C
3.5 mm unbalanced stereo input jack — This input also
accepts unbalanced, line level audio signals through a 3.5 mm
tip-ring-sleeve (TRS) stereo connector. If unused, the receptacle
automatically terminates to lower the noise floor.
D
Captive screw balanced or unbalanced audio input connector
— This 5-pole 3.5 mm captive screw receptacle accepts line level,
balanced or unbalanced, mono or stereo audio inputs.
Stereo jack input
Captive screw input
Tip (+)
Sleeve ( )
RCA Connector
Sleeve ( )
Ring (R)
Tip (L)
3.5 mm TRS Connector
Balanced Mono Input
Tip
Ring
Sleeve
LR
Balanced Stereo Input
Tip
Ring
Tip
Ring
Sleeves
LR
Unbalanced Stereo Input
Tip
Slee
ve
Slee
ve
Tip
LR
Unbalanced Mono Input
Tip
Sleeve
LR
See the attention and note on the following page for important information about connecting
wires to captive screw connectors.
MPA 152 Plus • Panels and Cabling 6
ATTENTION:
•
The length of the exposed wires in the stripping process is critical. The ideal length is
3/16 inches (5 mm). Any longer and the exposed wires may touch, causing a short
circuit between them. Any shorter and the wires can be easily pulled out even if tightly
fastened by the captive screws.
• La longueur des câbles exposés est primordiale lorsque l’on entreprend de les dénuder.
La longueur idéale est de 5mm (3/16inches). S’ils sont trop longs, les câbles exposés
pourraient se toucher et provoquer un court-circuit. S’ils sont trop courts, ils peuvent
être tirés facilement, même s’ils sont correctement serrés par les borniers à vis.
NOTE: Do not tin the wires. Tinned wire does not hold its shape and can become loose
over time.
Depending on the position of the front panel toggle switch (figure 8,
B
, on page 10), the
right and left channels may be output as a stereo signal or as a dual mono signal. See Audio
Output on page 9 for more information.
Remote Control
E
Remote Control Input — This 3-pin, captive screw port allows an
audio controller to control volume and mute levels remotely. See Remote
Control Options on page 12 if using a MediaLink controller.
Remote control connectors
Wiring for remote control
Options for remote control include the Extron VC50, VCM100AAP, VCM100MAAP, VCM200
series, and MLAVC10 Plus. Third party 10k potentiometer volume controllers can also be
connected to this port.
Figure 5 and the instructions below show the wiring for the VCM 100 MAAP. Wiring other remote
control connectors is similar.
VCG
10V 50mA
REMOTE
Ground (Pin 3)
V
olume Pot
1
0k ohms
2k ohms
Vol/Mute
(Pin 2)
10 V (Pin 1)
Mute
Switch
Figure 5. Remote Control Wiring
• Pin 1 is for 10 VDC reference voltage output.
• Pin 2 (C) has two functions:
• Volume control: it can be used as a variable voltage input between 0 and 10 VDC,
with 0 V giving full attenuation and 10 V giving maximum volume.
• Mute: it can be used for remote control muting. Sound is muted while this pin is shorted
to ground.
• Pin 3 is for the ground connection.
NOTE: All nominal levels are at ±10%.
VCG
10V50mA
REMOTE
MPA 152 Plus • Panels and Cabling 7
Controlling multiple amplifiers with one volume controller
Several MPA 152 Plus units can be daisy-chained so that one volume controller can
simultaneously regulate the volume of all the amplifiers.
NOTES:
• As additional amplifiers are added to the daisy chain, the sensitivity of the volume
potentiometer changes. The maximum volume level (fully clockwise) is not affected.
However, the effectiveness of the minimum volume level (fully counterclockwise) in
reducing the volume to inaudible levels decreases as more amplifiers are added to the
daisy chain.
• When more than two amplifiers are attached to the chain, sound may begin to be heard
even if the levels have been set to their lowest. The muting of the output however can be
remedied with a contact closure button attached between the C (volume or mute) and G
(ground) pins of the first amplifier in the chain.
To regulate multiple amplifiers with a single volume controller, follow these instructions:
1. Attach all three pins of the volume controller to the corresponding pins on the first
MPA152Plus unit only:
• Ground ( ) to ground (G)
• Vol/Mute to C
• 10 V to V.
2. Use jumper wires to connect the C (Volume and Mute) pins of the first amplifier and each
successive amplifier.
3. Use jumper wires to connect the G (ground) pins of the first amplifier and each successive
amplifier.
VCG
10V 50mA
VCG
10V 50mA
VCG
10V 50mA
10V
VOL/MUTE
Extron
VCM 100 AAP
Ext
ron
MP
A 152 Plus
Daisy Chain
Figure 6. Regulating Multiple Amplifiers with a Single Volume Controller
NOTE: The 10V pin of the volume controller connects to the first MPA 152 Plus only.
There are no jumper wires linking it to subsequent amplifiers.
MPA 152 Plus • Panels and Cabling 8
Audio Output
F
Speaker Connectors — This 4-pole, 5 mm screw lock captive screw receptacle is used to
connect the amplifier to the speakers.
With an 8 ohm load, the amplifier produces up to 8watts per channel. With a 4 ohm load, the
amplifier produces up to 15watts per channel.
ATTENTION:
• The length of the exposed wires in the stripping process is critical. The ideal length is
3/16 inches (5 mm). Any longer and the exposed wires may touch, causing a short circuit
between them. Any shorter and the wires can be easily pulled out even if tightly fastened
by the captive screws.
• La longueur des câbles exposés est primordiale lorsque l’on entreprend de les dénuder.
La longueur idéale est de 5mm (3/16inches). S’ils sont trop longs, les câbles exposés
pourraient se toucher et provoquer un court-circuit. S’ils sont trop courts, ils peuvent être
tirés facilement, même s’ils sont correctement serrés par les borniers à vis.
• Do not ground or short the speaker outputs as this will damage the amplifier.
• Ne pas mettre à la terre ni créer de court-circuit dans les sorties de l’enceinte, afin
d’éviter tout risque de détérioration de l’amplificateur.
NOTE: Do not tin the wires. Tinned wire does not hold its shape and can become loose
over time.
RCA
Captive
Screw
TRS
+
-
Left
+
+
Right
RCA
Captive
Screw
TRS
+
-
+
+
+
+
+
+
+
+
Amp Stage
Stereo/Dual Mono Switch
Stereo
Stereo
Dual
Mono
Figure 7. MPA 152 Plus Summing Diagram
Signal flow is as follows:
1. The MPA 152 Plus sums and weights the left unbalanced signals from the TRS and RCA
inputs. This summed, unbalanced signal is then summed with the left balanced signal from
the captive screw input.
2. The right channel is handled in the same way.
3. The left and right channels are then sent to the output amplifiers in one of two ways,
depending on how the front panel switch (see figure 8,
B
, on the next page) is set.
• Stereo: The left and right channels are sent to the left and right output amplifiers
respectively.
• Dual Mono: The left and right channels are summed and then the resulting mono is fed
to both of the output amplifiers.
The captive screw, RCA, and TRS inputs are buffered.
Speaker connectors
figure 7
MPA 152 Plus • Panels and Cabling 9
Setup and
Operation
This section discusses:
• Front Panel Features and Operation
• Remote Control Options
• Defeating the Auto Power-down Timer
• Troubleshooting
Front Panel Features and Operation
This section describes how configure the MPA 152 Plus, using the front panel controls and how
to set up the remote control options.
BASSLEVEL TREBLE
MINI POWER AMPLIFIER
MPA 152 Plus
STEREO
DUAL
MONO
B
BBCC
C
A
A
A
Figure 8. MPA 152 Plus Front Panel
A
Power LED — The LED lights green when the MPA 152 Plus unit is receiving power and
active. It lights amber when the unit is powered down (after 25 minutes of inactivity).
B
STEREO or DUAL MONO toggle switch — Allows the user to choose between stereo
output for stereo applications (default) or dual mono output for mono applications.
C
LEVEL, BASS, and TREBLE potentiometers — Three front panel potentiometers are
used to optimize input level, bass, and treble settings.
figure 8
MPA 152 Plus • Setup and Operation 10
Do not use excessive torque when adjusting the LEVEL, BASS, or TREBLE potentiometers. Read
the following notification before adjusting the potentiometers:
ATTENTION:
• The default position of the LEVEL potentiometer when shipped is turned fully counter-
clockwise (fully attenuated). The default position of the BASS and TREBLE potentiometers
is 12 o’clock (flat response).
• La position par défaut du potentiomètre de niveau lors de son expédition est orientée
vers le sens antihoraire (atténuation complète). La position par défaut des potentiomètres
de graves et d’aigus est 12 h (réponse linéaire).
• Do not use a screwdriver to adjust the potentiometers. The potentiometers should only
be adjusted as needed using the included Extron tweeker (small screwdriver).
• Ne pas utiliser de tournevis pour ajuster les potentiomètres. Les potentiomètres doivent
uniquement être ajustés selon les besoins avec le petit tournevis Extron fourni.
• While potentiometer tuning knobs may look like screws, they do not function in the same
manner. Use a light touch when adjusting to avoid applying excessive torque to the
potentiometers.
• Bien que les boutons de réglage du potentiomètre ressemblent à des vis, ils n’ont pas
la même fonction. Exercez une pression légère lors du réglage afin d’éviter un serrage
excessif des potentiomètres.
• Applying excessive torque can cause mechanical damage to the potentiometer,
rendering it inoperable.
• Un serrage excessif peut endommager le potentiomètre, le rendant inutilisable.
Setting Input Level
Adjust the MPA 152 Plus input level as follows:
1. Unplug the Remote plug from the unit.
2. Set the volume of the audio source to its minimum level by turning the LEVEL potentiometer
fully counterclockwise to its minimum setting without using excessive torque.
3. Set the volume of the audio source to its maximum level. No sound should come out.
4. Slowly increase the MPA 152 Plus level by rotating the LEVEL potentiometer clockwise
without using excessive torque until sound distortion starts.
5. Lower the level slightly until the distortion disappears. At this setting, whatever the volume
setting of the audio source, no clipping will occur.
Setting Bass and Treble
NOTES:
• Do not use excessive torque when adjusting the BASS or TREBLE potentiometers.
• Turning the BASS or TREBLE potentiometers counterclockwise will decrease the output at
the specified frequencies. Turning the potentiometers clockwise will increase the output.
When the potentiometer is in the center, flat response is achieved.
Adjust the MPA 152 Plus bass and treble as follows:
1. Use the BASS potentiometer to increase or decrease the bass shelving ±10 dB at 80 Hz and
below.
2. Use the TREBLE potentiometer to increase or decrease the treble shelving ±10 dB at 10kHz
and above.
MPA 152 Plus • Setup and Operation 11
Remote Control Options
POWER
12V
0.7A MAX
4
Ω
8
Ω
CLASS 2
WIRING
L
R
L
R
V C G
10V 50mA
L
MPA 152 Plus
R
/
INPUTS
OUTPUT REMOTE
PC
VGA w/
Audio Cable
Projector
8 ohm Ceiling
Speakers
in Parallel
VCR
Composite
Audio RCA
Variable
Audio
Output
ComLink
IR Remote
Extron
MLC 104 IP
Controller
Extron
VCM 100 AAP
Volume/Mute Controlle
r
Extron
MPA 152 Plus
Mini Power Amplifier
CONFIG
PROJECTOR
VOLUME
MLC 104 IP
1
2
3
4
ON
OFF
MUTE
VOLUME
VCM 100 AAP
DVD
S-video
Audio RCA
1
1
1
2
2
2
3
3
3
Figure 9. Typical Application for the MPA 152 Plus, Using Remote Control
1
Using the IR remote for the projector — When using a projector with variable audio
outputs, connect the projector audio output to the MPA 152 Plus audio input. Use the IR
remote for the projector to control the volume of the projector, which effectively controls the
volume of the MPA 152 Plus.
2
Extron volume controllers — Extron provides a range of volume and mute controllers
for use with a projector that lacks variable audio outputs. These options control the
MPA 152 Plus volume directly (see Wiring for remote control on page 7).
3
Using a MediaLink Controller — For a projector with variable audio output, connect the
projector audio output to the MPA 152 Plus audio input. Use a MediaLink controller to adjust
the volume of the projector via RS-232. MediaLink controllers can also use the IR remote to
adjust the volume of the projector and, thus, the input to the amplifier.
MPA 152 Plus • Setup and Operation 12
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
Extron MPA 152 Plus Manuel utilisateur
- Catégorie
- Amplificateurs audio
- Taper
- Manuel utilisateur
dans d''autres langues
- English: Extron MPA 152 Plus User manual
Documents connexes
-
Extron MPA 152 Plus Manuel utilisateur
-
Extron MPA 601 Manuel utilisateur
-
-
-
Extron PS 125 Manuel utilisateur
-
-
-
-
Extron electronic PS Series Desktop Power Supply Manuel utilisateur
-
Extron TLP Pro 720C Manuel utilisateur