Extron XPA Ultra Series Manuel utilisateur

Marque: Extron

Modèle: XPA Ultra Series

Catégorie: Amplificateurs audio

Taper: Manuel utilisateur

User Guide

XPA Ultra Series:

Audio Products

Half-Rack Audio Power Ampliﬁers

68-3149-01 Rev. C

02 20

XPA U 758, XPA U 358, XPA U 358-70V, XPA U 358-100V, XPA U 358C-70V, XPA U 358C-100V

XPA U 1004, XPA U 1004-70V, XPA U 1004-100V, XPA U 1004C-70V, XPA U 1004C-100V,

XPA U 1002, XPA U 1002-70V, XPA U 1002-100V

Safety Instructions

Safety Instructions • English

WARNING: This symbol, , when used on the product, is intended to

alert the user of the presence of uninsulated dangerous voltage within the

product’s enclosure that may present a risk of electric shock.

ATTENTION: This symbol, , when used on the product, is intended

to alert the user of important operating and maintenance (servicing)

instructions in the literature provided with the equipment.

For information on safety guidelines, regulatory compliances, EMI/EMF

compatibility, accessibility, and related topics, see the Extron Safety and

Regulatory Compliance Guide, part number 68-290-01, on the Extron

website, www.extron.com.

Sicherheitsanweisungen • Deutsch

WARNUNG: Dieses Symbol auf dem Produkt soll den Benutzer darauf

aufmerksam machen, dass im Inneren des Gehäuses dieses Produktes

gefährliche Spannungen herrschen, die nicht isoliert sind und die einen

elektrischen Schlag verursachen können.

VORSICHT: Dieses Symbol auf dem Produkt soll dem Benutzer in

der im Lieferumfang enthaltenen Dokumentation besonders wichtige

Hinweise zur Bedienung und Wartung (Instandhaltung) geben.

Weitere Informationen über die Sicherheitsrichtlinien, Produkthandhabung,

EMI/EMF-Kompatibilität, Zugänglichkeit und verwandte Themen finden Sie in

den Extron-Richtlinien für Sicherheit und Handhabung (Artikelnummer

68-290-01) auf der Extron-Website, www.extron.com.

Instrucciones de seguridad • Español

ADVERTENCIA: Este símbolo, , cuando se utiliza en el producto,

avisa al usuario de la presencia de voltaje peligroso sin aislar dentro del

producto, lo que puede representar un riesgo de descarga eléctrica.

ATENCIÓN: Este símbolo, , cuando se utiliza en el producto, avisa

al usuario de la presencia de importantes instrucciones de uso y

mantenimiento recogidas en la documentación proporcionada con el

equipo.

Para obtener información sobre directrices de seguridad, cumplimiento

de normativas, compatibilidad electromagnética, accesibilidad y temas

relacionados, consulte la Guía de cumplimiento de normativas y seguridad

de Extron, referencia 68-290-01, en el sitio Web de Extron, www.extron.com.

Instructions de sécurité • Français

AVERTISSEMENT : Ce pictogramme, , lorsqu’il est utilisé sur le

produit, signale à l’utilisateur la présence à l’intérieur du boîtier du

produit d’une tension électrique dangereuse susceptible de provoquer

un choc électrique.

ATTENTION : Ce pictogramme, , lorsqu’il est utilisé sur le produit,

signale à l’utilisateur des instructions d’utilisation ou de maintenance

importantes qui se trouvent dans la documentation fournie avec le

matériel.

Pour en savoir plus sur les règles de sécurité, la conformité à la

réglementation, la compatibilité EMI/EMF, l’accessibilité, et autres sujets

connexes, lisez les informations de sécurité et de conformité Extron, réf.

68-290-01, sur le site Extron, www.extron.com.

Istruzioni di sicurezza • Italiano

AVVERTENZA: Il simbolo, , se usato sul prodotto, serve ad

avvertire l’utente della presenza di tensione non isolata pericolosa

all’interno del contenitore del prodotto che può costituire un rischio di

scosse elettriche.

ATTENTZIONE: Il simbolo, , se usato sul prodotto, serve ad avvertire

l’utente della presenza di importanti istruzioni di funzionamento e

manutenzione nella documentazione fornita con l’apparecchio.

Per informazioni su parametri di sicurezza, conformità alle normative,

compatibilità EMI/EMF, accessibilità e argomenti simili, fare riferimento

alla Guida alla conformità normativa e di sicurezza di Extron, cod. articolo

68-290-01, sul sito web di Extron, www.extron.com.

Instrukcje bezpieczeństwa • Polska

OSTRZEŻENIE: Ten symbol, , gdy używany na produkt, ma na celu

poinformować użytkownika o obecności izolowanego i niebezpiecznego

napięcia wewnątrz obudowy produktu, który może stanowić zagrożenie

porażenia prądem elektrycznym.

UWAGI: Ten symbol, , gdy używany na produkt, jest przeznaczony do

ostrzegania użytkownika ważne operacyjne oraz instrukcje konserwacji

(obsługi) w literaturze, wyposażone w sprzęt.

Informacji na temat wytycznych w sprawie bezpieczeństwa, regulacji

wzajemnej zgodności, zgodność EMI/EMF, dostępności i Tematy pokrewne,

zobacz Extron bezpieczeństwa i regulacyjnego zgodności przewodnik, część

numer 68-290-01, na stronie internetowej Extron, www.extron.com.

Инструкция по технике безопасности • Русский

ПРЕДУПРЕЖДЕНИЕ: Данный символ, , если указан

на продукте, предупреждает пользователя о наличии

неизолированного опасного напряжения внутри корпуса

продукта, которое может привести к поражению

электрическим током.

ВНИМАНИЕ: Данный символ, , если указан на продукте,

предупреждает пользователя о наличии важных инструкций

по эксплуатации и обслуживанию в руководстве,

прилагаемом к данному оборудованию.

Для получения информации о правилах техники безопасности,

соблюдении нормативных требований, электромагнитной

совместимости (ЭМП/ЭДС), возможности доступа и других

вопросах см. руководство по безопасности и соблюдению

нормативных требований Extron на сайте Extron: ,

www.extron.com, номер по каталогу - 68-290-01.

安全说明 • 简体中文

警告：产品上的这个标志意在警告用户该产品机壳内有暴露的危险电压，

有触电危险。

注意：产品上的这个标志意在提示用户设备随附的用户手册中有

重要的操作和维护(维修）说明。

关于我们产品的安全指南、遵循的规范、EMI/EMF 的兼容性、无障碍

使用的特性等相关内容，敬请访问 Extron 网站 , www.extron.com，参见

Extron 安全规范指南，产品编号 68-290-01。

안전 지침 • 한국어

경고: 이 기호 가 제품에 사용될 경우, 제품의 인클로저 내에 있는

접지되지 않은 위험한 전류로 인해 사용자가 감전될 위험이 있음을

경고합니다.

주의: 이 기호 가 제품에 사용될 경우, 장비와 함께 제공된 책자에 나와

있는 주요 운영 및 유지보수(정비) 지침을 경고합니다.

안전 가이드라인, 규제 준수, EMI/EMF 호환성, 접근성, 그리고 관련 항목에

대한 자세한 내용은 Extron 웹 사이트(www.extron.com)의 Extron 안전 및

규제 준수 안내서, 68-290-01 조항을 참조하십시오.

安全記事 • 繁體中文

警告: 若產品上使用此符號，是為了提醒使用者，產品機殼內存在著

可能會導致觸電之風險的未絕緣危險電壓。

注意若產品上使用此符號，是為了提醒使用者，設備隨附的用戶手冊中有

重要的操作和維護（維修）説明。

有關安全性指導方針、法規遵守、EMI/EMF 相容性、存取範圍和相關主題的詳細資

訊，請瀏覽 Extron 網站：www.extron.com，然後參閱《Extron 安全性與法規

遵守手冊》，準則編號 68-290-01。

安全上のご注意 • 日本語

警告: この記号が製品上に表示されている場合は、筐体内に絶縁されて

いない高電圧が流れ、感電の危険があることを示しています。

注意:この記号が製品上に表示されている場合は、本機の取扱説明書に

記載されている重要な操作と保守(整備)の指示についてユーザーの注意

を喚起するものです。

安全上のご注意、法規厳守、EMI/EMF適合性、その他の関連項目に

ついては、エクストロンのウェブサイト www.extron.com より『 Extron Safety

and Regulatory Compliance Guide』 ( P/N 68-290-01) をご覧ください。

Trademarks

All trademarks mentioned in this guide are the properties of their respective owners.

The following registered trademarks (

), registered service marks (

), and trademarks (

) are the property of RGBSystems, Inc.

ExtronElectronics (see the current list of trademarks on the Terms of Use page at www.extron.com):

Registered Trademarks

(

)

Extron, Cable Cubby, ControlScript, CrossPoint, DTP, eBUS, EDID Manager, EDID Minder, Flat Field, FlexOS, Glitch Free. Global Configurator,

GlobalScripter, GlobalViewer, Hideaway, HyperLane, IPIntercom, IPLink, KeyMinder, LinkLicense, LockIt, MediaLink, MediaPort, NetPA,

PlenumVault, PoleVault, PowerCage, PURE3, Quantum, ShareLink, Show Me, SoundField, SpeedMount, SpeedSwitch, StudioStation,

SystemINTEGRATOR, TeamWork, TouchLink, V-Lock, VideoLounge, VN-Matrix, VoiceLift, WallVault, WindoWall, XTP, XTPSystems, and ZipClip

Registered Service Mark

(SM)

: S3 Service Support Solutions

Trademarks

(

™

)

AAP, AFL (Accu-RateFrameLock), ADSP(Advanced Digital Sync Processing), Auto-Image, AVEdge, CableCover, CDRS(ClassD

Ripple Suppression), Codec Connect, DDSP(Digital Display Sync Processing), DMI (DynamicMotionInterpolation), DriverConfigurator,

DSPConfigurator, DSVP(Digital Sync Validation Processing), eLink, EQIP, Everlast, FastBite, FOX, FOXBOX, IP Intercom HelpDesk, MAAP,

MicroDigital, Opti-Torque, PendantConnect, ProDSP, QS-FPC(QuickSwitch Front Panel Controller), RoomAgent, Scope-Trigger, SIS,

SimpleInstructionSet, Skew-Free, SpeedNav, Triple-Action Switching, True4K, Trade 8K, Vector™ 4K , WebShare, XTRA, and ZipCaddy

FCC Class B Notice

NOTE: This device complies with part 15 of the FCC rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2) This

device must accept any interference received, including interference that may cause

undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part15 of the FCC rules. These limits provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. There is no guarantee that interference will not

occur. If this equipment does cause interference to radio or television reception, which can

be determined by turning the equipment off and on, you are encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

In order to maintain compliance with FCC regulations, shielded cables must be used with this

equipment. Operation with non-approved equipment or unshielded cables is likely to result in

interference to radio and TV reception. The user is cautioned that changes and modifications

made to the equipment without the approval of the manufacturer could void the user’s authority

to operate this equipment.

NOTE: For more information on safety guidelines, regulatory compliances, EMI/EMF

compatibility, accessibility, and related topics see the Extron Safety and Regulatory

Compliance Guide on the Extron website.

Conventions Used in this Guide

Notifications

The following notifications are used in this guide:

WARNING: Potential risk of severe injury or death.

AVERTISSEMENT : Risque potentiel de blessure grave ou de mort.

ATTENTION:

• Risk of property damage.

• Risque de dommages matériels.

NOTE: A note draws attention to important information.

Specifications Availability

Product specifications are available on the Extron website, www.extron.com.

Extron Glossary of Terms

A glossary of terms is available at http://www.extron.com/technology/glossary.aspx.

viXPA Ultra Series Power Amplifiers • Contents

Contents

Introduction ...............................................1

About this Manual................................................ 1

Features .............................................................. 1

Installation .................................................4

Application Examples .......................................... 4

Mounting the XPA Ultra Series Ampliﬁers ............. 6

Tabletop Use ................................................... 6

UL Guidelines for Rack Mounting ..................... 6

Rack Mounting ................................................ 7

Rack Mounting Ventilation

Recommendations ....................................... 10

Flexible Conduit Adapter Kit Installation ............. 11

Operation .................................................15

Front Panel Features and Operation .................. 15

Rear Panel Features and Operation ................... 16

Bridged Mono Output (8 ohm/4 ohm

outputs only) ................................................. 19

Troubleshooting ................................................. 20

Amplifier Fails to Exit Standby Mode

Promptly ....................................................... 20

Amplifier Enters Standby Mode Too Early ....... 21

Limiter/Protect LED Warning Indicators.......... 21

Over Temp Indicator LED ............................... 21

XPA Ultra Series Power Amplifiers • Introduction 1

Introduction

About this Guide

This guide contains information about the Extron XPA Ultra Series of power amplifiers:

• XPA U 758 eight channel low impedance power amplifier

• XPA U 358 eight channel low impedance power amplifier

• XPA U 358-70V eight channel 70 volt power amplifier

• XPA U 358-100V eight channel 70 volt power amplifier

• XPA U 358C-70V eight channel combination low impedance and 70 volt power amplifier

• XPA U 358C-100V eight channel combination low impedance and 70 volt power

amplifier

• XPA U 1004 four channel low impedance power amplifier

• XPA U 1004-70V four channel 70 volt power amplifier

• XPA U 1004-100V four channel 100 volt power amplifier

• XPA U 1004C-70V four channel combination low impedance and 70 volt power

amplifier

• XPA U 1004C-100V four channel combination low impedance and 100 volt power

amplifier

• XPA U 1002 two channel low impedance power amplifier

• XPA U 1002-70V two channel 70 volt power amplifier

• XPA U 1002-100V two channel 100 volt power amplifier

Terms Used in this Guide

The terms “amplifier” and “power amplifier” are used interchangeably in this manual to refer

to all of the XPA Ultra models.

Features

• Output Power

• XPA U 758 models — 75 watts rms output power per channel, 8 ohms, all

channels driven; 50 watts per channel, 4 ohms, all channels driven.

• XPA U 358 models — 35 watts rms output power per channel, all channels driven.

• XPA U 1004 models — 100 watts rms output power per channel, all channels

driven.

• XPA U 1002 models — 100 watts rms output power per channel, all channels

driven.

XPA Ultra Series Power Amplifiers • Introduction 2

• ENERGY STAR

qualified amplifiers — The XPA Ultra Series are ENERGY STAR

qualified amplifiers and energy efficient products that conserve energy and reduce

costs.

• Extron Patented CDRS - Class D Ripple Suppression — CDRS is an Extron

Patented technology that provides a smooth, clean audio waveform and an

improvement in signal fidelity over conventional Class D amplifier designs. CDRS

eliminates the high frequency switching ripple characteristics of Class D amplifiers,

a source of RF emissions which can interfere with sensitive AV equipment such as

wireless microphones.

• Convection cooled, fanless operation - can be stacked without extra rack

space for ventilation — The XPA Ultra Series amplifiers do not require internal fans

or vents for cooling, ensuring quiet, reliable operation. They generate substantially less

heat than conventional power amplifiers, making them ideal for rack-mount applications

where space is at a premium.

• Eight channels (XPA U 358 and 758 models), four channels (XPA U 1004

models), or two channels (XPA U 1002 models) in a 1U, half rack width

enclosure - single and dual rack mount hardware included — The channel density

of the XPA Ultra Series amplifiers reduce rack space requirements for many installations.

The included single and side by side rack mount hardware simplifies planning and saves

cost.

• Defeatable auto-standby with fast wake up — The XPA Ultra Series amplifiers

meet ENERGY STAR qualification requirements with an auto-standby feature that

automatically places the amplifier into standby after 25 minutes of inactivity, dramatically

reducing power consumption. The XPA Ultra Series amplifiers quickly return to full

power status in less than 100 ms upon signal detection, with minimal inrush current.

Auto-standby can be disabled if required.

• UL 2043 plenum rated when used with optional Flexible Conduit Adapter

Kit — The XPA Ultra Series amplifiers meet UL 2043 for smoke and heat release for

installation within a plenum airspace above a drop ceiling when used with the optional

Flexible Conduit Adapter Kit. Above-the-ceiling placement conceals the amplifier to

prevent theft, and is convenient for installing equipment when space inside the room is

limited.

• Professional grade signal-to-noise and THD+N performance — The

XPAUltraSeries amplifiers deliver professional grade performance, featuring 100 dB

signal-to-noise ratio and THD+N of less than 0.1%.

• Ultra low inrush current at power up - no need for power sequencing —

Allows multiple XPA Ultra Series amplifiers to be powered on simultaneously without

overloading power circuits. This eliminates the need for power sequencing.

• Power factor correction - removes harmonic content on AC line — The

XPAUltraSeries amplifiers feature power factor correction technology that smooths out

the high peak currents of the current draw of the amplifiers, minimizing the presence of

high frequency harmonics on the AC power line, preventing audible artifacts from being

transmitted to other audio equipment in the system.

• Rear panel recessed, detented level controls — Provides attenuation of input

signals for adjusting audio system gain staging. These controls are located on the rear

panel to prevent tampering with level adjustments. Laser etched markings provide

enhanced visibility of settings for ease of configuration.

• Automatic clip limiter — Detects actual onset of clipping. Gain is automatically

reduced without audible artifacts to protect speakers from clipping distortion.

• Multiple protection circuits — Active during output shorts, thermal overload, or DC

faults to prevent damage to the amplifier and speakers.

XPA Ultra Series Power Amplifiers • Introduction 3

• Remote standby port — Enables the XPA Ultra Series amplifiers to be remotely

powered down when not in use, reducing operating cost.

• High pass filter for high impedance models — This selectable filter, available on the

XPA Ultra Series high impedance models, rolls off frequencies below 80 Hz to prevent

saturation of speaker transformers.

• 5 mm screw-lock captive screw speaker connectors — Enable simple, secure

connections with 22 to 12 AWG speaker cables.

• Front and rear-mounted signal and protection indication LEDs — Provide

convenient indication of input signal presence and protection circuit activation from both

sides of an equipment rack.

• Front panel over-temperature LED — Provides visual indication that the amplifier

temperature has exceeded the optimal value, well in advance of the onset of thermal

protection circuitry.

• Internal Extron Everlast Power Supply — Provides worldwide power compatibility,

with high-demonstrated reliability and low power consumption for reduced operating

cost.

• Extron Everlast Power Supply is covered by a 7-year parts and labor warranty.

XPA Ultra Series Power Amplifiers • Installation 4

Installation

This section discusses how to install the XPA Ultra Series of audio power amplifiers. Topics

covered include:

• Application Examples

• Mounting the XPA Ultra Series Amplifiers

• Flexible Conduit Adapter Kit Installation

Application Examples

The following illustrations are application examples for the XPA Ultra Series power amplifiers.

AudioAudio

Ethernet

Audio

Display

DMP EXP

CATx Cable up to

230' (70 m)

HDMI

Ethernet

RS-232

Extron

DMP 128 Plus C V AT

Digital Matrix Processor

Extron

DTP HDMI 4K 230 Rx

Receiver

Extron

DTP CrossPoint 82 4K IPCP SA

Scaling Presentation

Matrix Switcher

CONFIG

DTP CROSSPOINT 4K SERIES

DIGITAL PRESENTATION SWITCHER

CONTROL I/O

AUDIO

VIDEO

LOGO

SELECT

ENTER PRESET

VIEW

ESC

MIC VOLUME VOLUME

INPUTS

OUTPUTS

eBUS

COM

112

12 2334

IR/S I/O

RELAYS

SLIMIT

OVER

RTS

CTS

HDMI

DIGITAL MATRIX PROCESSOR

CONFIG

CLIP

EXP LANUSB

SIGNAL

CLIP

SIGNAL

1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 89 10 11 12

ACTIVITY

INPUTS OUTPUTS

DMP 128 Plus

•

Table

Microphones

Table

Microphones

Audio

Extron

XPA U 358

Power Amplifer

Extron

SF 3C LP

Ceiling Speakers

Extron

TLP Pro 720C

Cable Cubby

TouchLink Pro

Touchpanel

AudioAudio

Ethernet/PoE

Extron

Help

System

Off

Display

Room

Control

Off

Mute

Screen

Lighting

December 15, 2013 - 7:58 AM

Audio

Control

Volume

Mute

Tuner

1 2 3

VCRLaptop PC DVD

Doc

Cam

Tuner

Channel

Last

Presets

321

654

987

Enter

AV LAN

Conference Room

DTP HDMI 230 Rx

OVER DTP

RS-232

Tx Rx Tx RxG

XPA U 358 SERIES

LIMITER/PROTECT

SIGNAL

OVER

TEMP

7654321

POWER AMPLIFIERS

AV LAN

LAN

VoIP

AV LAN

AV Sources

Figure 1. XPA U 358 Application Example

1 XPA U 358 Application Diagram

XPA Ultra Series Power Amplifiers • Installation 5

Ethernet

AV LAN

Ethernet

LAN

VoIP

Extron

XPA U 358-70V

Power Amplifer

Extron

SF 3CT LP

Ceiling Speaker

(Zone A1)

(Zone A3)

(Zone A2)

Extron

TLP Pro 725M

TouchLink Pro

Touchpanel

DMP EXP

AudioAudio

Ethernet/PoE

Ethernet

Ethernet/PoE

HDMI

Extron

DMP 128 Plus C V AT

Digital Matrix Processor

Extron

DTP CrossPoint 84 4K IPCP SA

Scaling Presentation

Matrix Switcher

Extron

SF 3CT LP

Ceiling Speaker

(Zone A4)

Extron

SF 3CT LP

Ceiling Speaker

DIGITAL MATRIX PROCESSOR

CONFIG

CLIP

EXP LAN USB

SIGNAL

CLIP

SIGNAL

1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 89 10 11 12

ACTIVITY

INPUTS OUTPUTS

DMP 128 Plus

AV LAN

Room A

AV Sources

Lectern

Extron

SF 3CT LP

Ceiling Speaker

(Zone B1)

(Zone B3)

(Zone B2)

Extron

SF 3CT LP

Ceiling Speaker

(Zone B4)

Extron

SF 3CT LP

Ceiling Speaker

AV LAN

Room B

Lectern

CONFIG

DTP CROSSPOINT 4K SERIES

DIGITAL PRESENTATION SWITCHER

CONTROL I/O

AUDIO

VIDEO

LOGO

SELECT

ENTER PRESET

VIEW

ESC

MIC VOLUME VOLUME

INPUTS

OUTPUTS

eBUS

COM

112

12 2334

IR/S I/O

RELAYS

SLIMIT

OVER

RTS

CTS

Microphones

mute select

audio

select ready

sync

power

mute select

audio

selectready

sync

power

Wireless

Microphone

Syst

XPA U 358 SERIES

LIMITER/PROTECT

SIGNAL

OVER

TEMP

7654321

POWER AMPLIFIERS

Extron

TLP Pro 725M

TouchLink Pro

Touchpanel

Figure 2. XPA U 358-70V Application Examples

2 XPA U 358 70V Application Diagram

XPA Ultra Series Power Amplifiers • Installation 6

Mounting the XPA Ultra Series Amplifiers

The XPA Ultra Series amplifiers can be mounted in a rack using included rack ears, set on a

table, mounted on a rack shelf, or mounted in the plenum space above a ceiling-mounted

projector. Additionally, two XPA Ultra Series amplifiers can be connected using the included

bridging plate to create a full rack width unit.

Tabletop Use

Four self-adhesive rubber feet are included with the audio amplifier.

For tabletop use, attach one foot at each corner on the bottom side of the amplifier and

place the unit in the desired location.

UL Guidelines for Rack Mounting

The following Underwriters Laboratories (UL) guidelines pertain to the installation of the

equipment in a rack.

1. Elevated operating ambient — If installed in a closed or multi-unit rack assembly,

the operating ambient temperature of the rack environment may be greater than room

ambient. Therefore, consider installing the equipment in an environment compatible

with the maximum ambient temperature specified by the manufacturer [Tma = +32 to

+122°F (0 to +50 °C)].

2. Reduced air flow — Installation of the equipment in a rack should be such that the

amount of air flow required for safe operation of the equipment is not compromised.

3. Mechanical loading — Mounting of the equipment in the rack should be such that a

hazardous condition is not achieved due to uneven mechanical loading.

4. Circuit overloading — Consideration should be given to the connection of the

equipment to the supply circuit and the effect that overloading of the circuits might have

on overcurrent protection and supply wiring. Appropriate consideration of equipment

nameplate ratings should be used when addressing this concern.

5. Reliable earthing (grounding) — Reliable earthing of rack-mounted equipment

should be maintained. Particular attention should be given to supply connections other

than direct connections to the branch circuit (such as the use of power strips).

XPA Ultra Series Power Amplifiers • Installation 7

Rack Mounting

The XPA Ultra Series amplifiers can be rack mounted using one of the following methods.

Rack Ear Rack Mounting

The XPA Ultra Series amplifiers ship with a set of rack ears so the half rack-width amplifiers

can be installed in a full rack width space.

Mount the amplifier with the rack ears as follows:

1. If feet were installed on the bottom of the amplifier, remove them.

2. Attach the included rack ears to the sides of the amplifier with the four provided #6

machine screws (see figure3,

XPA U 1004 SERIES

1 2 3 4

OVER

TEMP

LIMITER/PROTECT

SIGNAL

POW

AMPL

IFIERS

Figure 3. Install XPA Ultra Rack Ears

3. Insert the amplifier into the rack, align the holes in the rack ears with the holes on the

rack.

4. Secure the amplifier to the rack using four provided 10-32 x 3/4” screws (see

figure4,

XPA U 1004 SERIES

1 2 3 4

OVER

TEMP

LIMITER/PROTECT

SIGNAL

POWER

AMPL

IFIERS

Figure 4. Secure XPA Ultra Amplifier to Rack

3 Install XPA Ultra Rack Ears

4 Secure XPA Ultra to Rack

XPA Ultra Series Power Amplifiers • Installation 8

Bridge Plate Rack Mounting

The XPA Ultra Series amplifiers ship with a bridge plate connector for connecting two XPA

Ultra Series amplifiers together to form a full rack width unit.

Connect and mount two XPA Ultra Series amplifiers as follows:

1. If feet were installed on the bottom of the amplifiers, remove them.

2. Position the two amplifiers upside down and next to each other.

3. Use the bridge plate connector and four provided #4 machine screws to connect the

two amplifiers together (see figure5,

4. Attach the two short rack ears to the amplifiers with four provided #6 machine screws

(

XPA U 1

004 SERIES

1 2 3 4

OVER

TEMP

LIMITER/PROTE

SIGNAL

POWER AMPLIFIE

XPA U 1004 SERIES

1 2 3 4

OVER

TEMP

IMITER/PR

OTE

IGNAL

OWER A

MPLIFIE

Machine

screws (4)

Figure 5. Install XPA Ultra Series Bridge Plate

5. Insert the amplifiers into the rack, align the holes in the rack ears with the holes on the

rack.

6. Secure the amplifiers to the rack using four provided 10-32 x 3/4” screws (see

figure6,

XPA U 1004 SERIES

1 2 3 4

OVER

TEMP

LIMITER/PROTECT

SIGNAL

POWER AMPLIFIERS

XPA U 1004 SERIES

1 2 3 4

OVER

TEMP

LIMITER/PROTECT

SIGNAL

POWER

AMPL

IFIERS

Figure 6. Secure Connected XPA Ultra Amplifiers to Rack

5 Bridging Plate

6 Secure Connected XPAs to Rack

XPA Ultra Series Power Amplifiers • Installation 9

Rack Shelf Mounting

The XPA Ultra Series can be mounted in a shelf using the optional RSU 129 1U Universal

Rack Shelf Kit or the RSB 129 1U Basic Rack Shelf.

Mount the amplifier with the shelf as follows:

1. If feet were installed on the bottom of the amplifier, remove them.

2. Place the amplifier on one half of the rack shelf.

3. Align the front of the amplifier with the front of the shelf, and align the threaded holes on

the bottom of the amplifier with the holes in the rack shelf.

4. Attach the amplifier to the rack shelf with the two provided 4-40 x 3/16” machine

screws.

ATTENTION:

• Using screws longer than 3/16” will damage the unit and void the warranty.

• L’utilisation de vis plus longues que 3/16” endommagera l’unité et annulera la

garantie.

5. Insert the screws from the underside of the shelf, and securely fasten them into

diagonally-opposite corners.

(2) 4-40 x 3/16"

Screws

RSU 129

1U Universal Rack Shelf

False faceplate

uses 2 screws.

Use 2 mounting holes

on opposite corners.

XPA U 1004 SERIES

2 3 4

OVER

TEMP

LIMIT

ER/PROTECT

SIGNAL

POWER AMPLIFIERS

Figure 7. Mounting the Amplifier onto a Rack Shelf

6. Attach the false front panel (provided with the rack shelf) to the unoccupied side of the

rack, or install a second half rack width device in that side by repeating steps 1 through

7. Attach the rack shelf to the rack using four 10-32 x 3/4” screws (provided). Insert the

screws through #10 beveled washers, then through the holes in the rack (see figure7).

7 Rack Mounting the Amplifier

XPA Ultra Series Power Amplifiers • Installation 10

Rack Mounting Ventilation Recommendations

Excessive heat can decrease the optimal lifetime of the power amplifier. An over temp

indicator LED on the front panel of the amplifier lights red whenever the recommended

operating temperature has been exceeded.

To reduce the chances of an over temp condition, the XPA Ultra amplifiers should be

arranged in a rack environment such that the environment around the amplifier does not

reach or exceed +122 °F (+50 °C). No more than four stacks of XPA Ultra amplifiers should

be arranged one-on-top-of-the-other in a rack without an open space between the stacks

(see figure8).

The XPA Ultra can also be arranged above or below another non-XPA Ultra device. In this

case, the environment around the amplifier should not reach or exceed +122 °F (+50 °C).

Vent Space

Figure 8. Vent Space Example

8 Vent Space Example

XPA Ultra Series Power Amplifiers • Installation 11

Flexible Conduit Adapter Kit Installation

WARNING:

AVERTISSEMENT :

• The circuit breaker used for this connection should be rated no lower than 20 amps

and no greater than 30 amps.

• Le disjoncteur utilisé pour cette connexion devrait avoir une cote comprise entre 20

et 30amps.

• This unit must be installed in accordance with the National Electrical Code and with

all local codes.

• L’unité doit être installée conformément au NationalElectricCode et aux normes

électriques et de sécurité locales.

• An ALL-POLE MAINS SWITCH with a contact separation of at least 3 mm in each

pole shall be incorporated in the electrical installation of the building. The installation

shall be carried out in accordance with all applicable installation rules.

• Un interrupteur omnipolaire avec une séparation contact d’au moins 3mm dans

chaque pôle, devra être incorporée dans l’installation électrique du bâtiment.

L’installation doit être réalisée conformément à toutes les règles d’installation

applicables.

• Installation and service must be performed by a qualiﬁed electrician only.

• L’installation et l’entretien doivent être effectués uniquement par un électricien

qualiﬁé.

• Make sure that the source device and the XPA are turned off and disconnected

from the power source before you begin.

• Éteindre tous les appareils d’entrée et de sortie puis retirer les câbles

d’alimentation. Vériﬁez que le XPA soit déconnecté de la source d’alimentation

avant de procéder.

• To reduce the risk of ﬁre or electric shock, do not expose this apparatus to rain or

moisture.

• Aﬁn de réduire les risques d’incendie ou de choc électrique, protégez cet appareil

de la pluie ou de l’humidité.

• The Product is a Class I product, which must be connected only to a mains socket

outlet with a protective earthing (grounding) connection.

• Ce produit est un produit de ClasseI, qui doit être connecté seulement à une prise

femelle secteur équipée d’une connexion de mise à la terre.

• The mains plug/appliance coupler is used as the disconnect device and shall

remain readily operable.

• La ﬁche secteur ou le coupleur est un système de déconnexion dont le

fonctionnement immédiat constitue un facteur essentiel.

ATTENTION:

• A UL-listed electrical distribution box is required for the termination of the conduit

opposite the XPA (see UL Requirements on the next page).

• Un boîtier de distribution électrique listé UL est recommandé pour la terminaison du

conduit à l’opposé du XPA.

XPA Ultra Series Power Amplifiers • Installation 12

The optional Flexible Conduit Adapter Kit consists of:

• One conduit adapter plate (pre-attached), for PS 124 and XPA 1002/2001 amplifiers

• One conduit adapter plate for XPA Ultra Series amplifiers (not attached)

• One 6-foot long electrical conduit

• Three 7.5-foot, 18-gauge spade connector power wires

• One UL-rated zip tie wrap

• Three auxiliary crimp style spade connectors designed for 14- to 16-gauge wires

NOTE: If needed, Extron recommends using a UL-rated crimp tool to terminate the

spade connectors. One recommended choice is Molex crimp tool.

The kit provides a convenient means to replace the IEC power cord of the XPA Ultra with

conduit, where required by local codes.

UL Requirements

The UL requirements listed below pertain to the installation of the flexible conduit onto an

XPAUltra Series product.

• This unit is not to be used beyond its rated voltage range

• This unit must be wired to a UL-listed distribution box

NOTE: The UL-approved electrical distribution box is not included with either

the XPA Ultra or the Flexible Conduit Adapter Kit. The installer is responsible for

obtaining and installing the box.

Installing the Flexible Conduit Adapter Kit

ATTENTION:

• Electrostatic discharge (ESD) can damage IC chips even though you cannot feel it.

You must be electrically grounded before touching anything inside the XPA Ultra. A

grounding wrist strap is recommended.

• Les décharges électrostatiques peuvent endommager les puces de circuit

même si vous ne pouvez pas les sentir, les voir ou les entendre. Vous devez être

électriquement relié à la terre avant de toucher quoique ce soit à l’intérieur du XPA

Ultra. Un bracelet de mise à la terre est recommandé.

To install the flexible conduit to the XPA Ultra:

1. Unplug the IEC power cord from the amplifier.

2. Remove the 8 screws from the top, bottom, and sides of the XPA and lift off the cover

(see figure9).

100-240V

--A, 50-60 Hz

CLASS 2 WIRING

∞

STANDBY

SIGNAL

LIMITER/

PROTECT

ATTENUATION

INPUTS

REMOTE

OUTPUTS

XPA U 1004

8Ω/4Ω

Remove (8)

screws

Slide cover forward and

lift straight up.

Figure 9. Removing the Cover

9 Removing the Cover

XPA Ultra Series Power Amplifiers • Installation 13

3. Remove the 2 screws holding the blue (hot) line and brown neutral wires from the

terminal block on the PCB (see figure 10). Place the screws aside to be used later.

4. Remove the ground wire nut from the grounding stud on the bottom of the enclosure,

as shown in figure 10. Place the wire nut with the other screws to be used later.

5. Remove the wires attached to the IEC connector from the body of the XPA Ultra and

slide the IEC connector and attached wires up and out of the XPA Ultra enclosure

(figure10).

Blue Wire

Brown Wi

Disconnect cables

and r

emove IEC

connector

100-240V 1.3A

50-60Hz

Remove nut

Figure 10. Removing the IEC Connector

6. Remove the washer at the end of the conduit (washer-B in figure11) and remove the

conduit adapter plate that ships with the kit.

Separate adapter plate

and washer fr

om conduit.

Washer-A

Washer-B

Figure 11. Remove the Existing Adapter Plate

7. Place the adapter plate that ships with the conduit kit on the conduit with the flat side of

the plate facing the hexagonal nut and secure the new adapter plate to the conduit with

the washer removed in step 6 (see figure12).

PA Ultra Series Conduit Adapter Plate

Place the adpater plate

with the at side against

washer-A and secure with

washer-B.

Figure 12. Secure XPA Ultra Series Adapter Plate to Conduit

8. Thread the blue, brown, and green 18-gauge power wires included with the Flexible

Conduit Adapter Kit through the length of the electrical conduit.

10 Removing the IEC Connector

11 Installing the EMT Adapter Plate

12 Installing the EMT Adapter Plate

XPA Ultra Series Power Amplifiers • Installation 14

9. Install the conduit with the new conduit plate attached into the opening from which the

IEC connector was removed in step 5 (see figure13).

10. Connect the blue hot (line) and brown neutral wires to the terminal block on the PCB

using the 2 screws that were removed in step 3. Use the included zip tie wrap to secure

the two wires together close to the terminals (figure13).

WARNING: Ensure that you observe correct wire polarity. The following

illustration shows the location of the hot (line) and neutral terminals.

AVERTISSEMENT : Respecter la polarité correcte des câble. L’illustration suivante

indique l’emplacement des bornes de ligne et de neutre.

Slide the conduit

assembly into

the enclosue.

50-60Hz

100-240V 1.3A

Blue Wire

Brown Wir

Tie Wrap

Figure 13. Install the Conduit Assembly

11. Connect the ground wire, as shown above, to the grounding stud on the bottom of the

enclosure using the nut that was removed in step 4.

12. Replace the cover of the XPA Ultra by attaching the 8 screws that were removed in

step2.

13 Installing the EMT Adapter Plate

La page est en cours de chargement...

Extron XPA Ultra Series Manuel utilisateur

Marque: Extron

Modèle: XPA Ultra Series

Catégorie: Amplificateurs audio

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: Extron XPA Ultra Series User manual

Extron XPA Ultra Series Manuel utilisateur

Extron XPA Ultra Series Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents