Sony Portable CD Player CDX-C8050X Manuel utilisateur

Operating Instructions

Mode d’emploi

Manual de instrucciones

US

3-045-190-12 (1)

ES

FR

For installation and connections, see the supplied installation/connections manual.

En ce qui concerne l’installation et les connexions, consulter le manuel

d’installation/raccordement fourni.

Para obtener información sobre la instalación y las conexiones, consulte el manual

de instalación/conexiones suministrado.

FM/AM Compact Disc

Player

CDX-C8050X

FM/AM MiniDisc Player

MDX-C8500X

2

Warning

This equipment has been tested and found to

comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide

reasonable protection against harmful

interference in a residential installation. This

equipment generates, uses, and can radiate

radio frequency energy and, if not installed

and used in accordance with the instructions,

may cause harmful interference to radio

communications. However, there is no

guarantee that interference will not occur in a

particular installation. If this equipment does

cause harmful interference to radio or

television reception, which can be determined

by turning the equipment off and on, the user

is encouraged to try to correct the interference

by one or more of the following measures:

— Reorient or relocate the receiving antenna.

— Increase the separation between the

equipment and receiver.

— Connect the equipment into an outlet on a

circuit different from that to which the

receiver is connected.

— Consult the dealer or an experienced radio/

TV technician for help.

You are cautioned that any changes or

modifications not expressly approved in this

manual could void your authority to operate

this equipment.

CAUTION

The use of optical instruments with this

product will increase eye hazard.

Owner’s Record

The model and serial numbers are located on

the bottom of the unit.

Record the serial number in the space

provided below.

Refer to these numbers whenever you call

upon your Sony dealer regarding this product.

Model No.

Serial No.

Welcome !

Thank you for purchasing the Compact Disc

Player/MiniDisc Player. This unit lets you

enjoy a variety of features using the following

controller accessories:

Supplied accessory

Card remote commander RM-X91

Optional accessory

Rotary commander RM-X4S

In addition to the CD/MD playback and radio

operations, you can expand your system by

connecting an optional CD/MD unit*

1

.

When you operate this unit or a connected

optional CD unit with the CD TEXT function,

the CD TEXT information will appear in the

display when you play a CD TEXT disc*

2

.

*

1

You can connect an MD changer, a CD changer,

an MD player, or a CD player.

*

2

A CD TEXT disc is an audio CD that includes

information such as the disc name, artist name

and track names.

This information is recorded on the disc.

You can change the display language to

English, French, or Spanish.

* Some display indications do not appear in

the language you select.

3

Precautions

• If your car was parked in direct sunlight

resulting in a considerable rise in

temperature inside the car, allow the unit to

cool off before operating it.

• If no power is being supplied to the unit,

check the connections first. If everything is in

order, check the fuse.

• If no sound comes from the speakers of the

two-speaker system, set the fader control to

the center position.

•If your car is equipped with a power

antenna, it will extend automatically while

the unit is operating.

•Do not use the Custom file feature while

driving, or perform any other function which

could divert your attention from the road.

If you have any questions or problems

concerning your unit that are not covered in

this manual, please consult your nearest Sony

dealer.

Moisture condensation

On a rainy day or in a very damp area,

moisture may condense on the lenses inside

the CD/MD player. Should this occur, the unit

will not operate properly. In this case, remove

the disc and wait for about an hour until the

moisture has evaporated.

To maintain high quality sound

If you have drink holders near your audio

equipment, be careful not to splash juice or

other soft drinks onto the unit and CD/MD.

Sugary residues on the unit or CD/MD may

contaminate the lenses inside the unit, reduce

the sound quality, or prevent sound

reproduction altogether.

Notes on CDs

A dirty or defective disc may cause sound

dropouts while playing. To enjoy optimum

sound, handle the disc as follows.

Handle the disc by its edge. To keep the disc

clean, do not touch the surface.

Do not stick paper or tape on the labeled

surface.

If you use the discs explained below, the sticky

residue can cause the CD to stop spinning and

may cause malfunction or ruin your discs.

Do not use second-hand or rental CDs that

have a sticky residue on the surface (for

example from peeled-off stickers or from ink,

or glue leaking from under the stickers).

There are paste residue

Ink is sticky

Do not use rental CDs with old labels that are

beginning to peel off.

Stickers that are beginning

to peel away, leaving

a sticky residue

Do not use your CDs with labels or stickers

attached.

Labels are attached

continue to next page t

4

Notes on MDs

Since the disc itself is housed in a cartridge,

free from accidental contact with your fingers

and dust, MDs can withstand a certain degree

of the rough handling. However, dirt or dust

on the surface of the cartridge or a warped

cartridge may cause a malfunction. Observe

the following for best results.

Never touch the surface of the disc itself by

deliberately opening the shutter on the

cartridge.

When you eject the MD, the shutter may be

open. In such a case, close the shutter

immediately.

Do not expose the MD to direct sunlight or

heat sources such as hot air-ducts. Do not leave

it in a car parked in direct sunlight where there

can a considerable rise in temperature.

Make sure the MD is not left on the dashboard

or rear tray of a car etc. where the temperature

can also be excessive.

Do not expose the discs to direct sunlight or

heat sources such as hot air-ducts, or leave

them in a car parked in direct sunlight where

there can be a considerable rise in the

temperature inside the car.

Before playing, clean the discs with an optional

cleaning cloth. Wipe each disc from the center

out.

Do not use solvents such as benzine, thinner,

commercially available cleaners or antistatic

spray intended for analog discs.

Notes on CD-R discs

•You can play CD-Rs (recordable CDs) on this

unit. However depending on the conditions

of the recording equipment or the CD-R disc

itself, some CD-Rs cannot be played on this

unit.

•You cannot play a CD-R that is not finalized

(Finalization is necessary for a recorded

CD-R disc to be played on the audio CD

player).

•You cannot play CD-RWs (rewritable CDs)

on this player.

When you play 8 cm (3 in.) CDs

Use the optional Sony compact disc single

adaptor (CSA-8) to protect the CD player from

damage.

5

Notes on attaching labels

Be sure to attach labels on cartridges correctly,

as failing to do so may cause the MD to

become stuck in the unit.

•Attach the label in a suitable position.

•Remove old labels before putting new ones

on.

•Replace labels that are beginning to peel

away from the MD.

Cleaning

Wipe the surface of the MD cartridge from

time to time with a soft dry cloth.

6

Table of contents

Location of controls ................................................. 7

Getting Started

Resetting the unit ................................................ 9

Detaching the front panel .................................. 9

Turning the unit on/off ................................... 10

How to use the menu ....................................... 10

Setting the clock ................................................ 10

CD/MD

Listening to a CD

with CDX-C8050X only ............................... 11

Listening to an MD

with MDX-C8500X only .............................. 12

Playing a CD or MD

(with optional CD/MD unit) ..................... 12

Playing tracks repeatedly

— Repeat Play .............................................. 14

Playing tracks in random order

— Shuffle Play .............................................. 14

Labeling a CD

— Disc Memo (For a CD unit with the

custom file function).................................... 15

Locating a disc by name

— List-up (For a CD unit with the custom

file function or an MD unit) ....................... 16

Selecting specific tracks for playback

— Bank (For a CD unit with the custom

file function) ................................................. 17

Radio

Memorizing stations automatically

— Best Tuning Memory (BTM) ................. 18

Memorizing only the desired stations ........... 18

Receiving the memorized stations.................. 19

Storing the station names

— Station Memo .......................................... 20

Locating a station by name

— List-up ...................................................... 21

DSP

Setting the equalizer ......................................... 21

Selecting the listening position ....................... 22

Selecting a soundstage menu

— Dynamic Soundstage

Organizer (DSO) .......................................... 23

Adjusting the balance (BAL) ........................... 23

Adjusting the front and rear fader ................. 24

Adjusting the volume of the subwoofer(s).... 25

Listening to each programme source in its

registered DSO

— Source Sound Memory (SSM) ............... 25

Selecting the spectrum analyzer ..................... 26

Other Functions

Labeling the rotary commander ..................... 26

Using the rotary commander .......................... 27

Attenuating the sound ..................................... 28

Changing the sound and display settings ..... 29

TV/Video

Watching the TV ............................................... 30

Watching a video .............................................. 30

Memorizing TV channels automatically ....... 30

Memorizing only the desired TV channels ... 30

Storing the TV channel names ........................ 31

Displaying the information

stored on discs .............................................. 31

Watching the TV or video while listening to a

CD or MD

— Simultaneous Play .................................. 32

Additional Information

Maintenance ....................................................... 33

Dismounting the unit ....................................... 34

Specifications ..................................................... 35

Troubleshooting guide ..................................... 36

7

Location of controls

Refer to the pages listed for details.

1 Volume control dial

2 MENU button 10, 13, 15, 16, 17, 18, 19,

20, 22, 24, 25, 26, 29, 30, 32

3 DISC/PRST +/– (cursor up/down) button

10, 13, 15, 16, 17, 18, 19, 20, 21, 22, 24,

25, 26, 29, 30, 32

During radio reception:

Preset stations select 19

During CD/MD playback:

Disc change 13, 16

During TV reception:

Channel select 30

4 Z (eject) button (located on the front

side of the unit behind the front panel)

11, 12

5 DSPL (display mode change) button

12, 13, 15, 20

6 LIST button

Station Memo 20

Disc Memo 15

List-up 16, 21, 31

7 SOURCE (Tuner/CD/MD/TV) button

10, 11, 12, 13, 16, 18, 19, 21, 22, 23, 24,

25, 26, 30, 32

8 Display window

9 OPEN button 9, 11, 12, 33

0 DSO button 23

qa SOUND button 21, 22, 23, 24, 25

qs Reset button (located on the front side

of the unit behind the front panel) 9

qd OFF button* 9, 10, 11, 12

qf SEEK/AMS –/+ (cursor left/right) button

10, 13, 15, 17, 19, 20, 21, 22, 23, 24, 25,

26, 29, 30, 32

Seek 18, 19

Automatic Music Sensor 13

Manual Search 13, 19

qg ENTER button 10, 13, 15, 16, 17, 18, 19,

20, 21, 22, 24, 25, 26, 29, 30, 32

qh MODE button

During radio reception:

BAND select 18, 19

During CD or MD playback:

CD/MD unit select 12, 16

During TV reception:

TV1/TV2 select 30

qj Receptor for the card remote

commander

qk Number buttons

During radio reception:

Preset number select 18, 19

During CD/MD playback:

(1) REP 14

(2) SHUF 14

During TV reception:

Preset number select 30

* Warning when installing in a car

without ACC (accessory) position

on the ignition key switch

Be sure to press (OFF) on the unit for

two seconds to turn off the clock

display after turning off the engine.

When you press (OFF) only

momentarily, the clock display does not

turn off and this causes battery wear.

CDX-C8050X/MDX-C8500X

D

I

S

C

+

P

R

S

T

+

-

D

I

S

C

–

P

R

S

T

-

LIST

DSPL

OFF

ENTER

MENU

SOUND

1 2 3 4 56

SOURCE

-

SEEK/AMS

REP SHUF

OPEN

MODE

DSO

8

Location of controls

Card remote commander RM-X91

Replacing the lithium battery

When the battery becomes weak, the range of

the card remote commander becomes shorter.

Replace the battery with a new CR2025 lithium

battery.

Notes on lithium battery

•Keep the lithium battery out of the reach of

children. Should the battery be swallowed,

immediately consult a doctor.

•Wipe the battery with a dry cloth to assure a

good contact.

•Be sure to observe the correct polarity when

installing the battery.

•Do not hold the battery with metallic

tweezers, otherwise a short-circuit may

occur.

WARNING

Battery may explode if mistreated.

Do not recharge, disassemble, or dispose of

in fire.

The corresponding buttons of the card

remote commander control the same

functions as those on this unit.

1 OFF button

2 MENU button

3 SOURCE button

4 SEEK/AMS (cursor </,) buttons

5 SOUND button

6 DSPL button

7 ATT button

8 LIST button

9 DISC/PRST (cursor M/m) buttons

0 ENTER button

qa MODE button

qs VOL buttons

OFF

SEEK SEEK

OPEN/CLOSE

MENU LIST

SOUND

ENTER

DSPL MODE

VOLATT

DISC

SOURCE

x

+ side up

A unit turned off by pressing (OFF) for two seconds cannot be operated with the card remote

commander unless (SOURCE) on the unit is pressed or a disc is inserted to activate the unit first.

9

Attaching the front panel

Place the hole A in the front panel onto the

spindle B on the unit as illustrated, then push

the left side in.

Notes

• Be careful not to attach the front panel upside

down.

• Do not press the front panel too hard against the

unit when attaching it.

• Do not press too hard or put excessive pressure

on the display window of the front panel.

• Do not expose the front panel to direct sunlight

or heat sources such as hot air ducts, and do not

leave it in a humid place. Never leave it on the

dashboard of a car parked in direct sunlight or

where there may be a considerable rise in

temperature.

Caution alarm

If you turn the car ignition off without

removing the front panel, the caution alarm

will beep for a few seconds.

Getting Started

Resetting the unit

Before operating the unit for the first time or

after replacing the car battery, you must reset

the unit.

Remove the front panel and press the reset

button with a pointed object, such as a ball-

point pen.

Note

Pressing the reset button will erase the clock

setting and some memorized functions.

Detaching the front panel

You can detach the front panel of this unit to

protect the unit from being stolen.

1 Press (OFF).

2 Press (OPEN), then slide the front panel

to the right side, and pull out the left

side of the front panel.

Notes

• Do not put anything on the inner surface of the

front panel.

• Be sure not to drop the panel when detaching it

from the unit.

• If you detach the panel while the unit is still

turned on, the power will turn off automatically

to prevent the speakers from being damaged.

• When carrying the front panel with you, use the

supplied front panel case.

Reset button

1

2

x

A

B

10

Turning the unit on/off

Turning on the unit

Press (SOURCE) or insert a disc in the unit.

For details on operation, refer to page 11 (CD/

MD) and page 18 (Radio).

Turning off the unit

Press (OFF) to stop CD/MD playback or FM/

AM reception (the key illumination and

display remains on.)

Press (OFF) for two seconds to completely

turn off the unit.

Note

If your car has no ACC position on the ignition key

switch, be sure to turn the unit off by pressing

(OFF) for two seconds to avoid car battery wear.

How to use the menu

This unit is operated by selecting items from a

menu.

To select, first enter the menu mode and

choose up/down (+/– of (DISC/PRST)), or

choose left/right (–/+ of (SEEK/AMS)).

(DISC/PRST)

(+) : To select upwards

(–) : To select downwards

(SEEK/AMS)

(+) : To select

rightwards

(–) : To select

leftwards

SOURCE

Setting the clock

The clock uses a 12-hour digital indication.

Example: To set the clock to 10:08

1 Press (MENU), then press either side of

(DISC/PRST) repeatedly until “Clock”

appears.

1 Press (ENTER).

The hour indication flashes.

2 Press either side of (DISC/PRST) to set

the hour.

3 Press (+) side of (SEEK/AMS).

The minute indication flashes.

4 Press either side of (DISC/PRST) to set

the minute.

2 Press (ENTER).

The clock starts.

After the clock setting is completed, the

display returns to normal playback mode.

Note

In the initial setting, the clock indication appears

while the unit is turned off.

When you select the “on” setting of the “D.Info”

item (page 29), you can see the clock indication in

the upper part of the display while you are

enjoying any source.

11

CD/MD

CDX-C8050X:

In addition to playing a CD with this unit

alone, you can also control external CD/MD

units.

MDX-C8500X:

In addition to playing an MD with this unit

alone, you can also control external CD/MD

units.

If you connect an optional CD unit with the

CD TEXT function, the CD TEXT information

will appear in the display when you playback

a CD TEXT disc.

Listening to a CD

with CDX-C8050X only

1 Press (OPEN) and insert the CD.

Playback starts automatically.

2 Close the front panel.

Tip

To play back an 8 cm (3 in.) CD, use the optional

Sony compact disc single adapter (CSA-8).

Labeled side up

CD indication

Elapsed playing timeTrack number

If a CD is already inserted, press (SOURCE)

repeatedly until “CD” appears to start

playback.

When the last track on the CD is

over

The track number indication returns to “1, ”

and playback restarts from the first track of the

CD.

To Press

Stop playback (OFF)

Eject the CD (OPEN) then Z

For details on operation, refer to

“Changing the display item” (page 12),

“Automatically scrolling a disc name,”

“Locating a specific track,”

“Locating a specific point in a track,” and

“Locating a disc” (page 13).

12

Listening to an MD

with MDX-C8500X only

1 Press (OPEN) and insert the MD.

Playback starts automatically.

2 Close the front panel.

If an MD is already inserted, press (SOURCE)

repeatedly until “MD” appears to start

playback.

The title of the MD* and the track title will

appear in the display window, then the

playing time will appear.

* Only if these titles are prerecorded on the MD.

When the last track on the MD is

over

The track number indication returns to “1, ”

and playback restarts from the first track of the

MD.

To Press

Stop playback (OFF)

Eject the MD (OPEN) then Z

For details on operation, refer to

“Changing the display item ,”

“Automatically scrolling a disc name,”

“Locating a specific track,”

“Locating a specific point in a track,” and

“Locating a disc” (page 13).

Playing a CD or MD

(with optional CD/MD unit)

1 Press (SOURCE) repeatedly to select

“CD” or “MD”.

2 Press (MODE) until the desired unit

appears.

CD/MD playback starts.

All the discs in the current CD/MD unit is

played from the top.

Changing the display item

Each time you press (DSPL) during MD, CD

or CD TEXT disc playback, the item changes as

follows:

*

1

While an optional CD/MD unit is connected.

*

2

If you have not labeled the CD or CD TEXT disc,

or if there is no disc name prerecorded on the

MD, “NO D.Name” appears in the display.

*

3

If you playback a CD TEXT disc, the artist name

appears in the display after the disc name.

(Only for CD TEXT discs with the artist name.)

*

4

If the track name of a CD TEXT disc or MD is not

prerecorded, “NO T.Name” appears in the

display.

Labeled side up

MD indication

Elapsed playing timeTrack number

V

Disc number*

1

/Track number/

Elapsed playback time

V

Disc name*

2

/Artist name*

3

V

Track name*

4

13

When you connect an optional CD unit, you

can label CD and CD TEXT discs with a

personalized name using the disc memo

function. Refer to “Labeling a CD” (page 15).

However, if you use personalized labels, they

will always take priority over the original CD

TEXT information when such information is

displayed.

After you select the desired item, the display

will automatically change to the Motion

Display mode after a few seconds.

In the Motion Display mode, all the items are

scrolled in the display one by one in order.

Tip

The Motion Display mode can be turned off. (See

“Changing the sound and display settings” on

page 29).

Automatically scrolling a disc name

— Auto Scroll

If the disc name, artist name, or track name on

an MD or a CD TEXT disc exceeds 10

characters and the Auto Scroll function is on,

information automatically scrolls across the

display as follows:

• The disc name appears when the disc has

changed (if the disc name is selected as the

display item).

• The track name appears when the track has

changed (if the track name is selected as the

display item).

• The disc or track name appears depending on

the setting when you press (SOURCE) to select

an MD or CD TEXT disc.

If you press (DSPL) to change the display

item, the disc or track name of the MD or CD

TEXT disc is scrolled automatically whether

you set the function on or off.

1 During playback, press (MENU).

2 Press either side of (DISC/PRST)

repeatedly until “A.Scrl” appears.

3 Press (+) side of (SEEK/AMS) to select

“A.Scrl on.”

4 Press (ENTER).

To cancel Auto Scroll, select “A.Scrl off” in

step 3 above.

To search

backward

To locate

preceding

tracks

SOURCE

To locate

succeeding

tracks

To search

forward

Note

For some CD TEXT discs with very many characters,

the following cases may happen:

— Some of the characters are not displayed.

— Auto Scroll does not work.

Locating a specific track

— Automatic Music Sensor (AMS)

During playback, press either side of

(SEEK/AMS) momentarily for each track

you want to skip.

Locating a specific point in a track

— Manual Search

During playback, press and hold either

side of (SEEK/AMS). Release when you

have found the desired point.

Note

If “

” or “ ” appears in the

display, you have reached the beginning or the

end of the disc and you cannot go any further.

Locating a disc

— Disc Selection

When an optional CD/MD unit is

connected, press either side of

(DISC/PRST) to select the desired disc.

The desired disc in the current optional

CD/MD unit begins playback.

14

LIST

DSPL

PTY

ENTER

1 2 3 4 56

-

SEEK/AMS

REP SHUF

MODE

Playing tracks in random

order — Shuffle Play

You can select:

•Shuf 1 - to play the tracks on the current disc

in random order.

•Shuf 2 - to play the tracks in the current

optional CD/MD unit in random order.

•Shuf All - to play all the tracks in all the

optional CD/MD units in random order.

During playback, press (2) (SHUF)

repeatedly until the desired setting

appears in the display.

*

1

“Shuf 2” is only available when you connect

one or more optional CD/MD units.

*

2

“Shuf All” is only available when:

• you connect one or more optional CD

units, or two or more MD units

(CDX-C8050X).

• you connect one or more optional MD

units, or two or more CD units

(MDX-C8500X).

Shuffle Play starts.

To return to normal playback mode, select

“Shuf off” in the step above.

LIST

DSPL

PTY

ENTER

1 2 3 4 56

-

SEEK/AMS

REP SHUF

MODE

Playing tracks repeatedly

— Repeat Play

The disc in the main unit will automatically

repeat itself when it reaches the end. As repeat

play, you can select:

•Repeat 1 - to repeat a track.

•Repeat 2 - to repeat a disc in the optional

CD/MD unit.

During playback, press (1) (REP)

repeatedly until the desired setting

appears in the display.

*“Repeat 2” is only available when you connect

one or more optional CD/MD units.

Repeat Play starts.

To return to normal playback mode, select

“Repeat off” in the step above.

B Repeat 1 B Repeat 2*

Repeat off b

B Shuf 1 B Shuf 2*

1

B Shuf All*

2

Shuf off b

15

Labeling a CD — Disc Memo

(For a CD unit with the custom file function)

You can label each disc with a personalized

name. You can enter up to eight characters for

a disc. If you label a CD, you can locate the

disc by name (page 16) and select the specific

tracks for playback (page 17).

1 Press (MENU), then press either side of

(DISC/PRST) repeatedly until ”Name

Edit” appears.

2 Press (ENTER).

Name edit mode

3 Enter the characters.

1 Press (+) side of (DISC/PRST)

repeatedly to select the desired

characters.

(A t B t C t ··· Z t 0 t 1 t 2 t

··· 9 t + t – t * t / t \ t > t <

t . t )

If you press (–) side of (DISC/PRST)

repeatedly, the characters will appear in

reverse order.

If you want to put a blank space between

characters, select “ ” (under-bar).

2 Press (+) side of (SEEK/AMS) after

locating the desired character.

The next character flashes.

If you press (–) side of (SEEK/AMS), the

previous character flashes.

3 Repeat steps 1 and 2 to enter the

entire name.

4 To return to normal CD playback mode,

press (ENTER).

Tips

• To erase or correct a name, enter “

” (under-

bar) for each character.

• There is another way to start labeling a CD. Press

and hold (LIST) for two seconds instead of steps

1 and 2. You can also complete the operation by

pressing and holding (LIST) for two seconds

instead of step 4.

Displaying the disc memo

Press (DSPL) during CD or CD TEXT disc

playback.

Each time you press (DSPL) during CD or

CD TEXT disc playback, the item changes

as follows:

V

Disc number*

1

/Track number/

Elapsed playback time

V

Disc memo name

V

Track name*

2

*

1

While an optional CD unit is connected.

*

2

If you connect an optional CD unit with the

CD TEXT function, the CD TEXT information

will appear in the display when you play a

CD TEXT disc.

Note

Do not use the Custom file feature while driving,

or perform any other function which could divert

your attention from the road.

16

Erasing the disc memo

1 Press (SOURCE) repeatedly to select

“CD.”

2 Press (MODE) repeatedly to select the CD

unit.

3 Press (MENU), then press either side of

(DISC/PRST) repeatedly until “NameDel”

appears.

4 Press (ENTER).

5 Press either side of (DISC/PRST)

repeatedly to select the disc name you

want to erase.

6 Press (ENTER) for two seconds.

The name is erased.

Repeat steps 5 and 6 if you want to erase

other names.

7 Press (MENU) twice.

The unit returns to normal CD playback

mode.

Notes

• When a personalized label is erased, the original

CD TEXT information will appear in the display.

• When you erase all of the disc names, “No Data”

appears in step 5.

Locating a disc by name

— List-up (For a CD unit with the custom

file function or an MD unit)

You can use this function for discs that have

been assigned a custom name. For more

information on disc names, refer to “Labeling a

CD” (page 15).

1 Press (LIST).

The name assigned to the current disc

appears in the display.

When you assign a disc memo label to a CD

TEXT disc, it takes priority over the original

CD TEXT information.

2 Press either side of (DISC/PRST)

repeatedly until you find the desired

disc.

3 Press (ENTER) to play the disc.

Notes

• After a disc name has been displayed for five

seconds, the display returns to normal playback

mode. To turn off the display, press (LIST).

• The track names are not displayed during MD or

CD TEXT disc playback.

• If there are no discs in the magazine, “NO Disc”

appears in the display.

• If a disc has not been assigned a custom file,

“********” appears in the display.

• If the disc information has not been read by the

unit, “?” appears in the display. To load a disc,

first press the number button, then choose the

disc that has not been loaded.

• Some letters cannot be displayed (during MD or

CD TEXT disc playback).

SOURCE

To locate

preceding discs

To locate

succeeding discs

17

Playing specific tracks only

You can select:

•“Bank on” - to playback the tracks with the

“Play” setting.

•“Bank inv” (Inverse) - to playback the tracks

with the “Skip” setting.

1 During playback, press (MENU), then

press either side of (DISC/PRST)

repeatedly until “Bank off” appears.

2 Press (+) side of (SEEK/AMS) repeatedly

until the desired setting appears.

B Bank on B Bank inv

Bank off b

3 Press (MENU).

Playback starts from the track following the

current one.

To return to normal playback mode, select

“Bank off“ in step 2 above.

Selecting specific tracks

for playback — Bank

(For a CD unit with the custom file function)

If you label the disc, you can set the unit to

skip or play the tracks of your choice.

1 Start playing the disc you want to label.

2 Press (MENU), then press either side of

(DISC/PRST) repeatedly until “Bank sel“

appears.

3 Press (ENTER).

Bank edit mode

4 Label the tracks.

1 Press either side of (SEEK/AMS)

repeatedly to select the track you

want to label.

2 Press (ENTER) repeatedly to select

“Play” or “Skip.”

5 Repeat step 4 to set “Play” or “Skip” for

all the tracks.

6 Press (MENU) twice.

The unit returns to normal CD playback

mode.

Notes

•“NO Name” flashes for five seconds when an

unlabeled disc is selected in step 3.

• You can set “Play” and “Skip” for up to 24

tracks.

• You cannot set “Skip” for all the tracks on a CD.

18

Memorizing only the

desired stations

You can preset up to 18 FM stations (6 each for

FM1, FM2, and FM3), up to 12 AM stations (6

each for AM1 and AM2) in the order of your

choice.

1 Press (SOURCE) repeatedly to select the

tuner.

2 Press (MODE) repeatedly to select the

band.

3 Press either side of (SEEK/AMS) to tune

in the station that you want to store on

the number button.

4 Press and hold the desired number

button ((1) to (6)) until “MEM” appears.

The number button indication appears in

the display.

Note

If you try to store another station on the same

number button, the previously stored station will

be erased.

Radio

Memorizing stations

automatically

— Best Tuning Memory (BTM)

The unit selects the stations with the strongest

signals and memorizes them in the order of

their frequencies. You can store up to 6 stations

on each band (FM1, FM2, FM3, AM1, and

AM2).

Caution

When tuning in stations while driving, use

Best Tuning Memory to prevent accidents.

1 Press (SOURCE) repeatedly to select the

tuner.

Each time you press (SOURCE), the source

changes as follows:

B Tuner B CD* B MD* B TV*

* If the corresponding optional equipment is

not connected, this item will not appear.

2 Press (MODE) repeatedly to select the

band.

Each time you press (MODE), the band

changes as follows:

B FM1 B FM2 B FM3

AM2 b AM1 b

3 Press (MENU), then press either side of

(DISC/PRST) repeatedly until “BTM”

appears.

4 Press (ENTER).

The unit stores stations in the order of their

frequencies on the number buttons.

A beep sounds when the setting is stored.

Notes

• The unit does not store stations with weak

signals. If only a few stations can be received,

some number buttons will retain their former

setting.

• When a number is indicated in the display, the

unit starts storing stations from the one currently

displayed.

• If a disc is not in the unit, only the tuner band

appears even if you press (SOURCE).

19

Receiving the memorized

stations

1 Press (SOURCE) repeatedly to select the

tuner.

2 Press (MODE) repeatedly to select the

band.

3 Press the number button ((1) to (6)) on

which the desired station is stored.

Tip

Press either side of (DISC/PRST) to receive the

stations in the order they are stored in the

memory (Preset Search Function).

If you cannot tune in a preset

station

Press either side of (SEEK/AMS) to search

for the station (automatic tuning).

Scanning stops when the unit receives a

station. Press either side of (SEEK/AMS)

repeatedly until the desired station is

received.

Note

If the automatic tuning stops too frequently, press

(MENU), then press either side of (DISC/PRST)

repeatedly until “Local” (local seek mode) is

displayed. Then press (+) side of (SEEK/AMS) to

select “Local on.” Press (ENTER).

Only the stations with relatively strong signals will

be tuned in.

Tips

• When you select the “Local on” setting,

“LCL Seek” appears while the unit is searching

for a station.

• If you know the frequency of the station you

want to listen to, press and hold either side of

(SEEK/AMS) until the desired frequency appears

(manual tuning).

If FM stereo reception is poor

— Monaural Mode

1 During radio reception, press (MENU),

then press either side of (DISC/PRST)

repeatedly until “Mono” appears.

2 Press (+) side of (SEEK/AMS) until

“Mono on“ appears.

The sound improves, but becomes

monaural (“ST” disappears).

3 Press (ENTER).

To return to normal mode, select

“Mono off” in step 2 above.

If FM stereo broadcast becomes

monaural

If interference occurs, the “IF Auto” function of

this unit will automatically avoid noise and

narrow the reception frequency. In such cases,

some FM stereo broadcasts may become

monaural. If you would like to listen to such

broadcasts in stereo, manually switch to the

“Wide” setting.

1 During radio reception, press (MENU),

then press either side of (DISC/PRST)

repeatedly until “IF Auto” appears.

2 Press (+) side of (SEEK/AMS) repeatedly

to select desired setting.

IF Auto y Wide

3 Press (ENTER).

Note

When you widen the frequency signal reception

setting (“Wide“ mode), some interference may

occur.

20

Storing the station names

— Station Memo

You can assign a name to each radio station

and store it in memory. The name of the

station currently tuned in appears in the

display. You can assign a name of up to eight

characters for a station.

Storing the station names

1 Tune in a station whose name you want

to store.

2 Press (MENU), then press either side of

(DISC/PRST) repeatedly until “Name

Edit” appears.

3 Press (ENTER).

4 Enter the characters.

1 Press (+) side of (DISC/PRST)

repeatedly to select the desired

characters.

(A t B t C t ··· Z t 0 t 1 t 2 t

··· 9 t + t – t * t / t \ t > t <

t . t )

If you press (–) side of (DISC/PRST)

repeatedly, the characters appear in the

reverse order.

If you want to put a blank space

between characters, select “ ” (under-

bar).

2 Press (+) side of (SEEK/AMS) after

locating the desired character.

The next character flashes.

If you press (–) side of (SEEK/AMS), the

previous character flashes.

3 Repeat steps 1 and 2 to enter the

entire name.

5 To return to the normal radio reception,

press (ENTER).

Tips

• To erase or correct a name, enter “

” (under-

bar) for each character.

• When storing station names, there is an

alternative method; press and hold (LIST) for

two seconds instead of doing steps 2 and 3.

Likewise, you can complete the operation by

pressing and holding (LIST) for two seconds

instead of doing step 5.

Displaying the station name

Press (DSPL) during radio reception.

Each time you press (DSPL), the item

changes as follows:

Station name* y Frequency

* If the station name of a station is not stored,

“NO Name” appears in the display for one

second.

Erasing the station name

1 Tune in a station you want to erase.

2 Press (MENU), then press either side of

(DISC/PRST) repeatedly until “NameDel”

appears.

3 Press (ENTER).

4 Press either side of (DISC/PRST) to select

the station name you want to erase.

5 Press (ENTER) for two seconds.

The name is erased.

Repeat steps 4 through 5 if you want to

erase other names.

6 To return to the normal radio reception,

press (MENU).

Note

When you erase all of the station names, “NO

Data” appears in step 5.

La page est en cours de chargement...

Sony Portable CD Player CDX-C8050X Manuel utilisateur

Ce manuel convient également à

Sony Portable CD Player CDX-C8050X Manuel utilisateur

dans d''autres langues

Documents connexes