Haier H3F285WEH1(UK) Manuel utilisateur

EN

User Manual

●

Upright F

reezer

-Colour code

H3F285*EH1

H3F330*EH1

Thank You EN

2

Legend

●

General information and tips

Warning – Important Safety information

Environmental information

●

Disposal

●

Help protect the environment and human health. Put

●

the packaging in applicable containers to recycle it.

Help to recycle waste of electrical and electronic ap-

pliances. Do not dispose appliances marked with this

symbol with the household waste. Return the product

to your local recycling facility or contact your municipal

Thank you for purchasing a Haier Product.

Please read these instructions carefully before using this appliance. The instructions con-

tain important information which will help you get the best out of the appliance and ensure

safe and proper installation, use and maintenance.

Keep this manual in a convenient place so you can always refer to it for the safe and proper

use of the appliance.

If you sell the appliance, give it away, or leave it behind when you move house, make sure

you also pass this manual so that the new owner can become familiar with the appliance

and safety warnings.

Warning!

Refrigerants and gases must be disposed of professionally. Ensure that the tubing of

the refrigerant circuit is not damaged before being properly disposed of. Disconnect

the door, the door catch and seals, to prevent children and pets to get closed in the ap

●

-

pliance.

EN Content

3

1 - Safety .............................................................................................................................4

2 - Intended Use .................................................................................................................8

3 -ProductDescription ........................................................................................................9

4 - Control panel ............................................................................................................... 10

5 - Use ............................................................................................................................... 11

6 - Energy saving .............................................................................................................. 11

7 - Equipment ................................................................................................................... 11

8 - Care and Cleaning ....................................................................................................... 15

9 - Troubleshooting ........................................................................................................... 17

10 - Installation ................................................................................................................. 20

11 - Technical Data ............................................................................................................ 24

12 -CustomerService......................................................................................................... 25

13-Connectivity Wi-fi....................................................................................................................26

1 - Safety EN

WARNING!

Make sure there is no transport damage.

●

Remove all packaging and keep out of children´s reach.

Wait at least six hours before installing the appliance in order to

Handle the appliance always with at least two persons because it

is heavy.

Installation

The appliance should be placed in a well-ventilated place. Ensure

●

a space of at least 10 cm above and around the appliance.

Do not cover air vent openings.

Never place the appliance in a damp area or location where it

●

might be splashed with water. Clean and dry water splashes and

stains with a soft clean cloth.

Do not install the appliance in direct sunlight or in the near of heat

sources(e.g. stoves, heaters).

Install and level the appliance in an area suitable for its size and use.

Keep ventilation openings in the appliance or in the in-built struc-

ture clear of obstruction.

Make sure that the electrical information on the rating plate agrees

with the power supply. If it does not, contact an electrician.

The appliance is operated by a 220-240 VAC/50 Hz power sup-

to start, or damage to the temperature control or compressor, or

there may be an abnormal noise when operating. In such case, an

●

automatic regulator shall be mounted.

Use a separate earthed socket for the power supply which is ea-

syly accessible during cleaning. The appliance must be earthed.

Only for UK:

●-

pliance is installed, the plug should be accessible.

Do not use multi-plug adapters and extension cables.

Ensure that the power cable is not trapped by the freezer. Do not

step on the power cable.

Do not damage the refrigerant circuit.

4

hints!:

EN 1 - Safety

5

WARNING!

Daily use

This appliance can be used by children aged from 8 years and above

●

Keep away children under 3 years of age from the appliance unless th-

Children shall not play with the appliance.

●

and persons with reduced physical, sensory or mental capabilities or

lack of experience and knowledge if they have been given supervision

or instruction concerning use of the appliance in a safe way and unde-

rstand the hazards involved.

ey are constantly supervised.

of the app-

d windo-

ws and do not unplug a plug in the power cable of the freezer or any

other appliance.

ient ra-

nge between 10 and 43 °C. The appliance may not work properly if it is

left for a long period at a temperature above or below the indicated ra-

●

nge.

with wa-

ter) on top of the freezer, to ovoid personal injury caused by falling or

electric shock caused by contact with water.

Open and close the doors only with the handles. The gap between the

doors and between the doors and the cabinet is very narrow. Do not

. Open

or close the freezer doors only when there are no children standing w-

ithin the range of door movement.

s in

the appliance or in the vicinity.

Do not store medicines, bacteria or chemical agents in the appliance.

●

This appliance is a household appliance. It is not recommended to st-

ore materials that require strict temperatures.

On refrigerating mode without a 4-star compartment: this refrigerati-

g mode

with a 4-star compartment: this freezing appliance is not suitable for

●

Never store liquids in bottles or cans (besides high percentage spirits)

especially carbonated beverages in the freezer, as these will burst du-

ring freezing.

Check the condition of food if a warming in the freezer has taken place.

Do not set unnecessarily low temperature in the freezer compartme-

nt. Attention: Bottles can burst.

1 - Safety EN

6

WARNING!

Daily use

Do not touch

●

frozen goods with wet hands (wear gloves). Espe

cially do not eat ice lollies immediately after removal from the

freezer compartment. There is the risk to freeze or the formation

of frost blisters. FIRST aid: keep immediately under running cold

water. Do not pull away!

Do not touch the inside surface of the freezer when in operation,

especially with wet hands. Your hands may freeze onto the sur

face.

Unplug the applian

●

ce in the event of a power interruption or be

fore cleaning. Allow at least 5 minutes before restarting the appli

ance, as frequent starting may damage the compressor.

Do not use electrical devices inside the food storage compart

ments of the appliance, unless they are of the type recommend

ed by the manu

●

facturer.

Maintenance/cleaning

Make sure children are supervised if they carry out cleaning and

maintenance.

Disconnect the appliance from the electrical supply before un

dertaking any routine maintenance. Allow at least 5 minutes be

fore restarting the appliance, as frequent starting may damage

the compressor.

Hold the plug, n

●

ot the cable, when unplugging the appliance.

sprays, electric heaters like heater, hair dryer, steam cleaners or

other sources of heat in order to avoid damage to the plastic parts.

Do not use mechanical

●

devices or other means to accelerate the

defrosting process, other than those recommended by the man

ufacturer.

Do not use water spray or steam to clean the appliance.

If the supply cord is damaged, it must be replaced by the manu

avoid a hazard.

If the illuminating lamps is damaged, it must be replaced by the

nance provider.

EN 1 - Safety

7

WARNING!

(R600a). Ma

●

ke sure the refrigerant circuit is not damaged during

transportation or installation. Leaking refrigerant may cause eye

sou

●

rces, thoroughly ventilate the room, do not plug or unplug the

power cords of the appliance or any other appliance. Inform the

customer service.

In case of eyes get into contact with the refrigerant, rinse immedi

ately it under running water and call immediately the eye specialist.

Refrigerant gas information

WARNING!

WARNING:

●

When positioning the appliance, ensure the supply

cord is not trapped or damaged.

WARNING: Do not locate multiple portable socket-outlets or

portable power supplies at the rear of the appliance.

Do not store explosive substances such as aerosol cans with a

ful when installing, handling, serving and recycling the appliance.

Please contact to the service agent to dispose the appliance be

Do not try to repair, disassemble or modify the appliance by your-

self. In case of repair please contact our customer service.

2 - Intended use EN

8

2.1 Intended Use

“This appliance is intended to be used in household and similar applications such as

– farm houses and by clients in hotels, motels and other residential type environments;

– bed and breakfast type environments;

– catering and similar non-retail applications.

This appliance is intended for freezing food. It has been designed exclusively for use in dry-

interior house-holds.

●

It is not intended for commercial or industrial use. On demand this

appliance can be used as fresh food compartment.

ards and loss of

●

warranty claims.

2.2 Accessories

Check the accessories and literature in accordance with this list:

User manual

●

Warranty card Connectivity

Quick Guide

Energy

label

Twist Ice Maker Axe covers

Upper left

hinge for door

reversibility

Upper left

hinge cover

2.2

EN 3 - Product description

9

Picture of appliance (Fig. 3)

1 Control panel

●

2 LED light

3

4

●

Glass shelves

5 Drawers

6 Adjustable feet

7 Removable door racks

8 Door handle

3

7

8

2

1

3

6

4

5

Note This product c

4 - Control panel EN

10

Control panel (Fig. 4)

A

●

Fridge mode

B

●

Freeze temperature - Eco

C

●

Freeze temperature

D Freeze temperature

E Freeze temperature and

Super freeze mode

F Fresher zone

A

a

D

d

C

c

B

b

G

g

E

e

F

f

G Child lock

EN 5 - Use

11

Remove all packaging materials, keep them out of childrens reach and dispose them

in an environmentally friendly manner.

Clean the inside and outside of the appliance with water and a mild detergent before

putting any f

●

ood in it.

After the applian

●

ce has been levelled and cleaned, wait for at least 6 hours before con

necting it to the power supply. See Section INSTALLATION.

Precool the compartment for 2 hours at high settings before loading with food. To do

so, please set the temperature to -20 °C or -24 °C.

The appliance is in ope

●

ration as soon as it is connected to the power supply.

The freezer temperature is automatically set to -18 °C. This is the recommended set

ting and the ideal temperature for frozen goods. If desired, you can change the tem

peratures manually. Please see ADJUSTING THE TEMPERATURE.

after 30 seconds. The panel lock might be active.

Notice: Presettings

The appliance is preset to the recommended temperature of -18 °C. Under normal

ambient condition y

●

ou don´t need to set a temperature.

When the appliance is switched on after being disconnected from the main power

supply, it may take up to 12 hours for the correct temperature to be reached.

5.3 Standby-mode of display

operation. The display locks automatically. It lights up automatically when touching any but

ton or opening the door.

5.4 Display lock and unlock

Automatic locking

Display is automatically locked after 30 seconds without operation.

Manual locking

When the display is unlocked, press “Child lock” (G) and hold for 3 seconds, after a beep,

“Child lock”(g) indicator is light, display is locked. When the display is locked, press “Child

locked.

Notice: Displ

●

ay lock

When display is locked, functions such as temperature setting or super freeze are di

sabled. When above operation is attempted, Child lock indicator will blink for 3 times, to

remind that the display is locked.

5 - Use EN

12

5.5 Temperature setting

ture could be set, this process will be accompanied by beeps.

food storage. Prior

●

to making any mode change, please make sure to change the food

inside the freezer, so that

●

food will not be damaged because of mode change.

5.6 Freeze mode (-16°C to -24°C) (B - E)

temperature could be set, indicators on left of the touch button will be light and others will

5.7 Fridge mode(4°C) (A)

When display is unl

●

ocked, by touching (4°C) (A) and hold for 3 seconds, indicators “4°C” (a)

will be light, the freezer works in fridge mode. After stabilization, temperature is around 4°C.

5.8 Super freeze mode (E)

Super freeze mode is optimal for preserving food nutrition, it could freeze food in less

time. Before putting lots of food inside the freezer, activate super freeze function to have

lower temperature, to make sure better freeze result.

When display is unlocked, touch and hold (-24°C) (E) for 3 seconds, indicators (b - e) will be

light, the freezer works in super freeze mode. To deactivate manually super freeze func

tion, repeat steps above. If not deactivated manually, the function will be deactivated au

tomatically after 50 hours.

●

If you have a large amount of food to freeze at one time, it is recommended that the func

tion is activated 24 hours before inserting food. Function will stop automatically after 50

hours or manually. Power consumption will increase when this function is on.

Notice: Super freeze

In super freeze mode, temperature could not be adjusted. If you do so, super freeze

indicator will blink for 3 times to remind that the freezer is in super freeze mode.

5.9 Fresher Zone (F)

In the Freezer mode, FresherZone works as SHOCK FREEZE, the entire zone can be

quickly cooled to the freezing temperature.

When temperature is set at -16°C or lower, touch FresherZone button(F), the FresherZo

ne indicator(f) illuminates, then the blast function is activated. When activated, the func

tions will be automatically deactivated when temperature is reached or after 24 hours.

Repeat the operation to deactivate manually.

In the Fridge mode, FresherZone works as QUICKCOOL, the entire zone can be quickly coo-

led to the freezing temperature.

●

When temperature is set at 4°C, touch FresherZone button (F), the FresherZone indicator(f)

illuminates, then the FresherZone function is activated. When activated, the functions

will be automatically deactivated when temperature is reached or after 3 hours.

Repeat the operation to deactivate manually.

Deactivate FresherZone before switching from freezer to fridge temperature, or switching

from fridge to freezer temperature.

EN 5 - Use

13

Child lock is not memor

●

ized, after power back on, display is unlocked.

according to their properties (Fig. 5).

1 Pickled foods, canned food, fruit, vegetables,

salad, etc.

2 Eggs, canned food, spices, drinks and bottled

foods, etc.

3 Meat products, snack foods, etc.

On refrigerating mode without a 4-star compart-

ment: this refrigerating appliance is not suitable for

ar compartment this freezing appliance is not sui-

Food can be stored in the freezer at a temperature

of at least -18°C for 2 to 12 months, depending on

its properties (e.g., meat: 3-12 months, vegetables: 6-12 months).

In order to avoid expiration of storage periods, please note the freezing date, time limit a-

nd name of the food on the packaging according to the storage p

5.12 Door open alarm

●

When freezer is kept open for more than 1 minute, beeper will make 3 beeps with inter

val of 0.5 second. The beeps will be repeated every 30 seconds if door is kept open. The

beeps will stop until door is closed or after 7 mins of door opening. The beeper stops bee

5.13 High temperature alarm

This freezer is equipped with high temperature alarm. In freeze mode or super freeze

mode, if current temperature setting indicator blinks with beeps, touch any button, the

beep

●

will stop, but current temperature setting indicator keeps blinking, that means tem

perature in the freezer is too high. Please check if freezer door is tightly closed or if large

amount of warm food is put inside the freezer. After a period, current temperature indi

cator will stop blinking. If it does not stop blinking for a long period, and beeps that are

manually cancelled come back, please contact aftersales service.

5.10 Eco mode (-16°C) (B)

When display is unlocked, by touching (-16°C) (B) the appliance is set into Eco mode. In

this mode the energy consumption is lower, while apropriate freezing performance is still

guaranteed. To exit the Eco mode select other temperature.

Fig. 5

3

1

2

14

5.14 Error indication

This freezer is equipped with error indication. When an error is encountered, display will

could still freeze but

●

user should contact aftersales service as soon as possible for optimal

control of the freezer.

5.15 Wi-Fi

When the appliance is connected with Wi-Fi, it could be controlled from distant [tempe

rature setting adjustment, activation and deactivation of super freeze and FresherZone

function]. When the door is left open or when there is temperature deviation, real time

information could be informed through the application.

6 - Energy saving tips EN

7 - Equipment

●

Energy saving tips

Make sure the appliance is properly ventilated (see INSTALLATION).

Do not install the appliance in direct sunlight or in the near of heat sources (e.g.

stoves, heaters).

Avoid unnecessarily low temperature in the appliance. The energy consumption in

creases the lower the temperature in the appliance is set.

Allow warm food to cool down before placing it in the appliance.

Make sure the door always closes correctly and unimpaired by food position. Keep

door seals clean.

Defreeze frozen food in a fridge.

Clean the rear of the appliance regularly. Dust increases energy consumption.

nd shelves to be

positioned in the appliance on factory-fresh condition, and food to be placed without

blocking the air outlet of the duct.

7.1 Removable door racks

T

●

he door rack can be removed for cleaning:

Place hands on each side of the rack, lift it upwards (1)

and pull it out (2) (Fig. 7.3).

In order to insert the door rack, the above steps are

carried out in reverse order.

7.2 Glass shelves

1. edge (1) and pulling it out (2) (Fig. 7.2).

2. To reinstall it, put it on the lugs on both sides and

push it to the most rearward position until the rear

1

2

1

.

EN 8- Care and Cleaning

15

WARNING!

●

Disconnect the appliance from the power supply before cleaning.

8.1 General

Clean the appliance when only little or no food is stored.

WARNING!

D

●

o not clean the appliance with hard brushes, wire brushes, detergent powder, petrol,

amyl acetate, acetone and similar organic solutions, acid or alkaline solutions. Please

clean with special f

●

reezer detergent to avoid damage.

Do not use sprays, electric heaters like heater, hair dryer, steam cleaners or other

sources of heat in order to avoid damage to the plastic parts.

Do not clean the cold glass shelves with hot water. Sudden temperature change may

cause the glass to break .

Do not touch the inside surface of the freezer storage compartment, especially with

wet hands, as your hands may freeze onto the surface.

In case of heating check the

●

condition of frozen goods.

Do not try to repair the appliance by yourself. In case of repair please contact our

customer service.

Always keep the door gasket clean.

Clean the inside and housing of the appliance with a

soft cloth or sponge dampened in warm water and

neutral detergent (Fig. 8.1).

Rinse and dry with soft cl

●

oth.

Do not clean any of the parts of the appliance in a

dishwasher.

Clean the accessory only with warm water and mild

neutral detergent.

8- Care and Cleaning EN

16

8.2 Non-use for a longer period

If the appliance is not used for an extended period of time:

Take out the food.

Unplug the power cord.

Clean the appliance as described above.

Keep the door and freezer drawers open to prevent the creation of bad odours inside.

Remove the door of the appliance (open the door and hold it before removing the screws)

to avoid children entering into the appliance and getting locked in.

8.3 Moving the appliance

●

1. Remove all food and unplug the appliance.

2. Secure shelves and other moveable parts in the freezer with adhesive tape.

3. Close the door and secure it with tape.

4. Do not tilt the freezer more than 45° to avoid damaging the refrigerating system.

5. forcefully.

WARNING!

Do not lift the applian

●

ce by its handles.

Never place the appliance horizontally on the ground.

EN 9 - Troubleshooting

17

of a problem please check all shown possibilities and follow below instructions before you

contact an after sales service. See CUSTOMER SERVICE.

WARNING!

Before maintenance, deactivate the appliance and disconnect the mains plug from

the mains socket.

improper repai

●

rs can cause considerable consequential damages.

A damaged supply should only be replaced by the manufacturer, its service agent or

9.1 Troubleshooting

Problem Possible Cause Possible Solution

The compressor

does not work.

Mains plug is not connected in the

mains socket.

Connect the mains plug.

The appliance runs

frequently or for a

too long period of

●

time.

The indoor or outdoor tempera

ture is too high.

for a period of time.

The door of the appliance is not

tightly closed.

T

●

he door has been opened too

frequently or for too long.

The temperature setting is too low.

The door gasket is dirty, worn,

c

●

racked or mis-matched.

The required air circulation is not

gua

●

ranteed.

The interior is covered in ice.

In this case, it is normal for the

appliance to run longer.

Normally, it takes 8 to 12 hours

for the appliance to cool down

completely.

Close the door and ensure the

appliance is located on a level

ground and there is no food or

container jarring the door.

Do not open the door too fre

quently.

Set the temperature higher un

til a satisfactory temperature is

obtained. It takes 24 hours for

the temperature to become

stable.

Clean the door gasket or re

place them by the customer

service.

Ensure adequate ventilation.

Defrost the appliance.

The appliance

makes abnormal

sounds.

The appliance is not located on

level ground.

The appliance touches an object

close to it.

The appliance stands on a wooden

Level the appliance.

Remove objects around the

appliance.

the appliance somewhere else.

9 - Troubleshooting EN

18

Problem Possible Cause Possible Solution

The appliance

makes a clicking

sound

This is normal. It is caused by the

refrigeration unit switching on or

A slight sound is to

be heard similar to

ter.

This is normal.

The appliance makes a

motor sound

The refrigeration unit has just

t

●

urned itself on. This is normal

It is not cold enough

inside the appli

ance.

The temperature is set too high.

Goods that are too warm have

been stored.

Too much food has been stored at

a time.

The goods are too close to each

other.

The door is not tightly closed.

The door has been opened too

frequently or for too long.

Reset the temperature.

Always cool down goods be

fore storing them.

Always store small quantities of

food.

Leave a gap between several

Close the door.

Do not open the door too fre

quently.

It is too cold inside

the appliance.

The temperature is set too low.

The Fast-freezing function is ac

tivated or has been running too

long.

●

Reset the temperature.

function.

Moisture accumu

lates on the surface

of the appliance.

The climate is too warm and too

damp.

This is normal in damp climate

and will change when the hu

midity decreases. Wipe dry with

a cloth.

Strong ice and frost

in the freezer com

partment.

The goods were not adequately

packaged .

T

●

he door is not tightly closed.

The door has been opened too

frequently or for too long.

The door gasket is dirty, worn,

cracked or mis-matched.

Something on the inside prevents

the door f

●

rom closing properly.

Always pack the goods well.

Close the door.

Do not open the door too fre

quently.

Clean the door gasket or re

place them by the customer

service.

Reposition the shelves, door

racks, or internal containers to

allow the door to close.

The cooling system

does not work. Mains plug is not connected to the

mains socket.

T

●

he power supply is not intact.

Connect the mains plug.

Check the electrical supply to

the room. Call the local elec

tricity company!

EN 9 - Troubleshooting

19

Problem Possible Cause Possible Solution

The sides of the

cabinet and door

●

strip get warm.

This is normal.

You hear an alarm

●

signal. The door is open

The temperature inside product is

too high

Close the door or silence the

alarm manually.

to open. Once the appliance runs, it has an

internal vacuum. Open the door seal gently to let

air enter the appliacne.

The door can’t be

closed properly. It

always leaves a gap.

Because of the appliances’s low

temperature, the door seal can

easily get hard and deformed.

Use a hair dryer or put a hot

towel on the spot where the

gasket is deformed.

When the gasket is soft once

again, close the door and com

press it tightly.

9.2 Power Interruption

●

Minimum guarantee is: 2 years for EU Countries, 3 years for Turkey, 1 year for UK,

1 year for Russia, 3 years for Sweden, 2 years for Serbia, 5 years for Norway, 1 ye-

ar for Morocco, 6 months for Algeria, Tunisia no legal warranty required.

Thermostats, temperature sensors, printed circuit boards and light sources are

available for a minimum period of seven years after placing the last unit of the

model on the market.

Door handles, door hinges, trays and baskets for a minimum period of seven ye-

ars and door gaskets for a minimum period of 10 year, after placing the last unit

of the model on the market.

In the event of

●

a power cut, food should remain safely cold for about 18 hours. Follow

these tips during a prolonged power interruption, especially in summer:

Open the door as few times as possible.

Do not put additional food into the freezer during a power interruption.

If prior noti

●

ce of a power interruption is given and the interruption duration is longer

than 15 hours, make some ice and put it in a container in the top of the freezer com

partment.

As temperature in the freezer will rise during a power interruption or other failure,

the storage period and edible quality of food will be reduced. Any food that defrosts

should be either consumed, or cooked and refrozen (where suitable) soon after

wards in order to prevent health risks.

Notice: Memory function during power interruption

After restoration of power the appliance continues with the settings that were set be

fore the power failure.

10 - Installation EN

20

10.1 Unpacking

WARNING!

●

The appliance is heavy. Always handle with at least two persons.

Keep all packaging

●

materials out of childrens reach and dispose them in an environ

mentally friendly manner.

Take the appliance out of the packaging.

Remove all packaging materials.

10.2 Environmental conditions

the temperature inside the appliance and its energy consumption. Do not install the appli

ance near other heat-emitting appliances (ovens, refrigerators) without isolation.

10.3 Space requirements

●

Required space to open the door (Fig. 10.3):

Width

in mm Depth

in mm Distance to wall

in mm

W1

●

W2 D1 D2 D3 D4

595 955 592 1105 1215 100

10.4 Ventilaton cross-section

FOR a free standing appliance: this refrigerating

appliance is not intended to be used as a built-in

appliance.

sa

●

fety reasons, the information of the required ventila

tion cross sections must be observed (Fig. 10.4).

10.5 Aligning the appliance

The appliance should be placed on a at and solid sur

face. If the appliance is placed on a pedestal, strong and

foam packing material as a pedestal.

1. Tilt the appliance slightly backwards (Fig. 10.5).

2. Set the feet to the desired level.

3. The stability can be checked by alternately bump

ing on the diagonals. The slight swaying should be

the same in both directions. Otherwise the frame

can warp; possible leaking door seals are the result.

A low tendency to the rear eases the closing of the

door.

W2

D1 D3

D2

W1 D4

10.3

10 cm

10.4

10.5

La page charge ...

Haier H3F285WEH1(UK) Manuel utilisateur

Ce manuel convient également à

Haier H3F285WEH1(UK) Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents