Wacker Neuson SW28 Manuel utilisateur

Operator's Manual

Compact loaders

SW24/SW28

ST35/ST45

Machine typH04-01/S04-02/S04-03/S04-04

EditioQ.6

Order nR200

022252

Lan

guagHXs

5200022252

This Operator's Manual includes

the AEM 3afety -anual SS-1303

Dokument ationen

Documentations Language Order no. Documentations Language Order no.

Operator's Manual [us] 5200022252

Spare parts list

SW24 [de en fr] 1000323666

Spare parts list

ST35 [de en fr] 1000323692

SW24 [it es en] 1000323669 ST35 [it es en] 1000323693

SW28 [de en fr] 1000323670 ST45 [de en fr] 1000323865

SW28 [it es en] 1000323691 ST45 [it es en] 1000323870

Printed in Austria.

No part of this publication may be reproduced, translated or used in any form or by any means – graphic, electronic or mechanical

including photocopying, recording, taping or information storage or retrieval systems – without prior permission in writing from the

manufacturer.

No reproduction or translation of this publication, in whole or part, without the written consent of Wacker Neuson Linz GmbH.

Violations of legal regulations, in particular of the copyright protection, will be subject to civil and criminal prosecution.

Wacker Neuson Linz GmbH keep abreast of the latest technical developments and constantly improve their products. For this reason, we

may from time to time need to make changes to diagrams and descriptions in this documentation which do not reflect products which

have already been delivered and which will not be implemented on these machines.

Technical data, dimensions and weights are given as an indication only. Responsibility for errors or omissions not accepted. Non-metric

weights and measurements are approximate.

The cover features machines with possible optional equipment.

Pictures and graphics are symbolic representations and can differ from the actual product.

Wacker Neuson Linz GmbH

Flughafenstraße 7

A-4063 Hörsching

Legend

Original Operator‘s Manual x

Translation of original Operator‘s

Manual

–

Edition 1.6

Date 03/2015

Document OM S04 us

OM S04 us 1.6 * S04us1_6IVZ.fm I-1

Table of contents

EC Declaration of Conformity..............................................................................................................EG-1

1Foreword

1.1 Operator’s Manual................................................................................................................................ 1-1

1.2 Warranty and liability ............................................................................................................................ 1-7

2 Safety Information

2.5 Preparing To Use The Machine............................................................................................................ 2-3

2.6 Operator and Technician Qualifications and Basic Responsibilities..................................................... 2-5

2.7 Safety Instructions Regarding Operation.............................................................................................. 2-5

2.8 Special Instructions for Traveling on Public Roads .............................................................................. 2-8

2.9 Applications with Lifting Gear ............................................................................................................... 2-9

2.10 Attachments.......................................................................................................................................... 2-9

2.11 Trailers................................................................................................................................................ 2-10

2.13 Transport and Towing......................................................................................................................... 2-12

2.14 Lifting.................................................................................................................................................. 2-12

2.15 Safety Guidelines for Maintenance..................................................................................................... 2-13

2.16 Special Hazards ................................................................................................................................. 2-15

2.17 Safety Guidelines when using Internal Combustion Engines............................................................. 2-18

3 Introduction

3.1 Machine overview................................................................................................................................. 3-1

3.2 Brief description of machine ................................................................................................................. 3-2

3.3 Information and regulations on use ...................................................................................................... 3-5

3.4 Labels................................................................................................................................................. 3-11

4 Putting into operation

4.1 Cabin/control stand............................................................................................................................... 4-1

4.2 Overview of control elements ............................................................................................................. 4-17

4.3 Indicator lights and warning lights (overview)..................................................................................... 4-22

4.4 Preparatory work ................................................................................................................................ 4-28

4.5 Starting and stopping the engine........................................................................................................ 4-34

5Operation

5.1 Steering system.................................................................................................................................... 5-1

5.2 Accelerator actuation............................................................................................................................ 5-1

5.3 Brakes .................................................................................................................................................. 5-2

5.4 Travel operation.................................................................................................................................. 5-13

5.5 Differential lock................................................................................................................................... 5-18

5.6 Lights/signaling system ...................................................................................................................... 5-18

5.7 Wiper/wash system ............................................................................................................................ 5-23

5.8 Heating, ventilation and air conditioning system................................................................................. 5-24

5.9 Operating hydraulics........................................................................................................................... 5-32

5.10 Attachments........................................................................................................................................ 5-45

5.11 Work operation ................................................................................................................................... 5-49

5.12 Emergency lowering........................................................................................................................... 5-54

5.13 Options ............................................................................................................................................... 5-54

5.14 Putting out of operation/back into operation....................................................................................... 5-57

5.15 Permanently putting out of operation.................................................................................................. 5-59

6Transportation

6.1 Towing the machine ............................................................................................................................. 6-1

6.2 Loading the machine ............................................................................................................................ 6-2

6.3 Transporting the machine..................................................................................................................... 6-6

Table of contents

I-2 OM S04 us 1.6 * S04us1_6IVZ.fm

7 Maintenance

7.1 Information on maintenance................................................................................................................. 7-1

7.2 Maintenance overview.......................................................................................................................... 7-2

7.3 Fluids and lubricants........................................................................................................................... 7-10

7.4 Maintenance accesses ....................................................................................................................... 7-14

7.5 Cleaning and maintenance................................................................................................................. 7-24

7.6 Lubrication work.................................................................................................................................. 7-27

7.7 Fuel system ........................................................................................................................................ 7-27

7.8 Engine lubrication system................................................................................................................... 7-33

7.9 Cooling system ................................................................................................................................... 7-35

7.10 Air filter................................................................................................................................................ 7-39

7.11 V-belt .................................................................................................................................................. 7-40

7.12 Hydraulic system ................................................................................................................................ 7-40

7.13 Electrical system................................................................................................................................. 7-45

7.14 Heating, ventilation and air conditioning system................................................................................. 7-47

7.15 Washer system................................................................................................................................... 7-47

7.16 Axles/traveling drive............................................................................................................................ 7-48

7.17 Brake system...................................................................................................................................... 7-48

7.18 Tires/tracks......................................................................................................................................... 7-48

7.19 Maintenance of attachments............................................................................................................... 7-53

7.20 Maintenance of options....................................................................................................................... 7-53

7.21 Exhaust gas treatment........................................................................................................................ 7-53

7.22 Machine preservation ......................................................................................................................... 7-53

8Malfunctions

8.1 Engine warning lights (American tier IV)............................................................................................... 8-1

8.2 Engine and engine-oil warning lights (American tier IV)....................................................................... 8-2

8.3 Malfunctions (display element/multifunctional display)......................................................................... 8-4

8.4 General malfunctions............................................................................................................................ 8-5

9 Technical data

9.1 Model designations and trade names................................................................................................... 9-1

9.2 Engine................................................................................................................................................... 9-1

9.3 Traveling drive/axles............................................................................................................................. 9-2

9.4 Brakes................................................................................................................................................... 9-3

9.5 Tires/tracks........................................................................................................................................... 9-3

9.6 Steering system.................................................................................................................................... 9-4

9.7 Operating hydraulics............................................................................................................................. 9-4

9.8 Electrical system................................................................................................................................... 9-5

9.9 Tightening torques................................................................................................................................ 9-8

9.10 Coolant ................................................................................................................................................. 9-9

9.11 Sound pressure level............................................................................................................................ 9-9

9.12 Vibration.............................................................................................................................................. 9-10

9.13 Weight................................................................................................................................................. 9-14

9.14 Payload/stability.................................................................................................................................. 9-15

Index

Index ..............................................................................................................................................................S-1

OM S04 us 1.6 * S04konf.fm EG-1

Declaration of conformity

EC Declaration of Conformity

Not available.

Declaration of conformity

EG-2 OM S04 us 1.6 * S04konf.fm

Notes:

OM S04 us 1.6 * S04v100.fm 1-1

1

1 Foreword

1.1 Operator’s Manual

Information on this Operator’s Manual

The document box for storing the Operator’s Manual is located on the

right of the operator seat.

This Operator’s Manual contains important information on how to work

safely, correctly and economically with the machine. Therefore, it aims not

only at new personnel, but it also serves as a reference for experienced

personnel.

Furthermore, the reliability and the service life of the machine will be

increased by following the instructions in the Operator’s Manual. This is

why the Operator’s Manual must be kept at hand in the machine.

The operator must carefully read and understand the Operator’s Manual

before starting up, servicing or repairing the machine.

This Operator’s Manual will help to familiarize yourself more easily with

the machine, thereby enabling you to use it more safely and efficiently.

This Operator’s Manual does not include special superstructures.

Please contact your dealer if you require more information on the machine

or the Operator’s Manual.

Foreword

Table of contents

Index

1-2 OM S04 us 1.6 * S04v100.fm

1

Explanation of symbols and abbreviations

Explanation of symbols

• Identifies a list

- Identifies a subdivision of a list

➥ Description of a result

1. Identifies an activity

Follow the order of the activity!

2. Continuation of an activity

Follow the order of the activity!

A Identifies an alphabetical list

B Continuation of an alphabetical list

Cross references: see page 1-1 (page)

Cross references: 7 (pos. no. or table no.)

Cross references: fig. 3 (fig. no. 1)

Cross references: – see chapter “5 Operation” on page 5-1

(see chapter)

Cross references: – see “Operation” on page 5-1 (– see text)

Information

Identifies an information that, when followed, provides for a more efficient

and economical use of the machine.

Environment

Failure to observe the instructions identified by this symbol can cause

damage to the environment.

OM S04 us 1.6 * S04v100.fm 1-3

1

Abbreviations

Fig. Figure

AUX Auxiliary hydraulics

BWidth

o/h Operating hours

approx. approximately

PMC Particulate Matter Catalyst

FOPS Falling Objects Protective Structure

HSWS Hydraulic quickhitch

max. maximum

min. minimum

NE Nominal width

Pos. Position

ROPS Roll Over Protective Structure (without losing contact with the ground)

TOPS Tip Over Protective Structure

e.g. for example

1-4 OM S04 us 1.6 * S04v100.fm

1

Definitions

Right/left/front/rear

These terms are used as seen by the operator in the cabin.

• 1: left

• 2: right

• 3: front

• 4: rear

Information

A second control lever is shown if functions with different control levers

(standard or option) can be performed.

Attachment

All exchangeable equipment (buckets, for example) released by Wacker Neu-

son and developed for work with the machine.

Towing

The compact loader is towed out of an immediate danger zone (railroad cross-

ing or job site, for example).

Operators Person driving and/or working with the machine.

Machine

Unless otherwise specified, the term “machine” refers to the compact loaders

described in this Operator’s Manual.

Jog Dial Control unit to change settings

Cabin

Unless otherwise specified, the term “cabin” refers both to the cabin (fully

glazed and with front door) and to the canopy without door.

Visual aids

Visual aids are, for example, rearview mirrors, cameras, but also persons

assisting the operator during machine operation.

American Tier III/Tier IV

(exhaust-gas standards)

The machine can be equipped with an American Tier III or Tier IV engine,

depending on the destination country. Both engine variants are described sep-

arately if there are engine-specific differences (regarding operation, for exam-

ple).

Fig. 1

4

21

3

OM S04 us 1.6 * S04v100.fm 1-5

1

Target-group definition

This Operator’s Manual is intended both for professional personnel on

construction sites accustomed to handling construction machines, and

also for private persons, for example, renting and operating a construction

machine.

The Operator’s Manual has been written in a way that allows machine

operation by trained private persons without any special knowledge. As

far as possible, no technical terms specific to construction machines are

used.

This Operator’s Manual must be fully read and understood both by private

persons and the professional personnel on construction sites.

A dealer or person renting the machine must instruct the operator and

have this confirmed in writing.

Operator qualification and requirements for safe operation

Among other things, safe machine operation depends on the following

points:

• Machine model and equipment.

• Machine maintenance.

• Work and travel speed.

• Nature of ground and work environment.

The most important points are the operator’s qualification and power of

judgement. A well-trained operator following the Operator’s Manual and

maintenance plan ensures a long service life and durability of the

machine.

Specific training enables the operator to acquire, among other things, the

following skills:

• Correct assessment of work situations.

• Feeling for the machine.

• Recognition of possible risk situations.

• Safe working by making the correct decisions for man, machine and

the environment.

The operator is at risk if the machine is not operated correctly.

Follow the operationg procedures and instructions described for the

machine.

Children and persons under the influence of alcohol, drugs or medicine

are not allowed to access the machine or operate it.

1-6 OM S04 us 1.6 * S04v100.fm

1

Conversion table

The rounded imperial values are indicated in brackets, for example 1060

cm³ (64.7 in³).

Volume unit

1 cm³ (0.061 in³)

1 m³ (35.31 ft³)

1 ml (0.034 US fl.oz.)

1 l (0.26 gal)

1 l/min (0.26 gal/min)

Unit of length

1 mm (0.039 in)

1 m (3.28 ft)

Weight

1 kg (2.2 lbs)

1 g (0.035 oz)

Pressure

1 bar (14.5 psi)

1 kg/cm² (14.22 lbs/in²)

Force/output

1 kN (224.81 lbf)

1 kW (1.34 hp)

1 PS (0.986 hp)

Torque

1 Nm (0.74 ft.lbs.)

Speed

1 kph (0.62 mph)

Acceleration

1 m/s² (3.28 ft/s²)

OM S04 us 1.6 * S04v100.fm 1-7

1

1.2 Warranty and liability

Exemption from warranty and liability

Warranty

Warranty claims can be made only if the conditions of warranty have been

observed. They are included in the General Conditions of Sales and

Delivery for new machines and spare parts sold by the dealers of Wacker

Neuson Linz GmbH. Furthermore, all instructions in this Operator’s

Manual must be observed.

Have the maintenance, delivery inspection and the entries in the service

booklet performed by a Wacker Neuson service center, otherwise

warranty claims will not be acknowledged.

Exemption from liability

• Modifying Wacker Neuson products and fitting them with additional

equipment and attachments that are not included in our delivery

program requires Wacker Neuson’s written authorization, otherwise

warranty and product liability for possible damage caused by these

modifications shall not be applicable.

• The safety of the machine can be negatively affected by performing

machine modifications without proper authority and by using spare

parts, equipment, attachments and optional equipment that have not

been checked and released by Wacker Neuson GmbH. Warranty and

product liability for possible damage caused by these modifications

shall not be applicable.

• Wacker Neuson Linz GmbH shall not be liable for injury or damage to

property that can caused by failure to observe the safety instructions

and the Operator’s Manual, and by the negligence of the duty to

exercise due care when:

- handling

- operating

- servicing and performing maintenance and

- repairing the machine. This is also applicable in those cases in which

special attention has not been drawn to the duty to exercise due

care, in the safety instructions as well as in the Operator’s and

maintenance manuals.

- Read and understand the Operator’s Manual before starting up,

servicing or repairing the machine. Observe all safety instructions.

1-8 OM S04 us 1.6 * S04v100.fm

1

Notes:

OM S04 us 1.6 * SSL_safety_US.fm 2-1

2

2 Safety Information

2.1 Safety Symbols Found In This Manual

This is the safety alert symbol. It is used to alert you to potential personal

hazards.

➥ Obey all safety messages that follow this symbol.

DANGER

DANGER indicates a hazardous situation which, if not

avoided, will result in death or serious injury.

Potential consequences of the hazard.

► Obey all safety messages that follow this symbol to avoid

injury or death.

WARNING

WARNING indicates a hazardous situation which, if not

avoided, could result in death or serious injury.

Potential consequences of the hazard.

► Obey all safety messages that follow this symbol to avoid

possible injury or death.

CAUTION

CAUTION indicates a hazardous situation which, if not

avoided, could result in minor or moderate injury.

Potential consequences of the hazard.

► Obey all safety messages that follow this symbol to avoid

possible minor or moderate injury.

Notice

NOTICE indicates a situation which, if not avoided, could result

in machine or property damage.

Information

Important identifies an instruction that, when followed, provides

for a more efficient and economical use of the machine.

Safety Information

2-2 OM S04 us 1.6 * SSL_safety_US.fm

2

Environment

Failure to observe the instructions identified by this symbol can

result in damage to the environment. The environment is at risk

if environmentally hazardous material, such as waste oil, is not

disposed of properly.

2.2 Warranty

Warranty claims can be brought forward to your Wacker Neuson dealer

only. Furthermore, the instructions in this Operator's Manual must be

observed.

2.3 Disposal

All fluids, lubricants, material, etc., used on the machine are subject to

specific regulations regarding collection and disposal. Dispose of different

materials and consumables separately and responsibly in accordance

with environmental protection legislation.

Environment

Avoid damage to the environment. Do not allow the oil and oily

wastes to get into the ground or stretches of water.

If the machine is no longer used according to its designated use, make

sure that it is decommissioned or put out of operation and disposed of

according to applicable regulations.

• Observe all applicable safety regulations during machine disposal.

• Machine disposal must be performed in accordance with state-of-the-

art standards that apply at the time of disposal.

2.4 Designated Use

1. In accordance with this designated use, the machine may only be used

for moving earth, gravel, coarse gravel or ballast and rubble. It may

also be used for operating with the attachments approved in the

chapter – see chapter “ Fields of application and use of attachments”

on page 3-6

2. No other applications are designated for the use of the machine.

Wacker Neuson will not be liable for damage resulting from use other

than mentioned above. The operator alone will bear the risk.

3. Designated use also includes following the instructions set forth in the

Operator's Manual and following the maintenance schedule.

4. Machine safety can be negatively affected by performing machine

modifications without proper authority and by using spare parts,

equipment, attachments and optional equipment which have not been

approved by Wacker Neuson. Wacker Neuson will not be liable for

damage resulting from unapproved parts or unauthorized

modifications.

OM S04 us 1.6 * SSL_safety_US.fm 2-3

2

5. Wacker Neuson shall not be liable for personal injury and/or damage to

property caused by failure to follow the safety instructions on labels

and in this Operator's Manual, and by not exercising due care, for

example:

• transporting the machine

• operating the machine

• servicing the machine and performing maintenance work

• repairing the machine.

6. Read and understand the Operator's Manual before starting, moving,

operating, servicing or repairing the machine. Observe the safety

instructions.

7. The machine shall not be used for transport jobs on public roads

unless it is in compliance with applicable regulations.

8. Only use Wacker Neuson-approved lifting devices.

9. The attachment coupler is only used for locking an attachment.

– see chapter “ Fields of application and use of attachments” on

page 3-6

10.Hydraulic hammer operation is only allowed in specified areas.

– see chapter “ Hydraulic hammer operation (option)” on page 5-36

2.5 Preparing To Use The Machine

Conditions for use

• The machine has been designed and built in accordance with state-of-

the-art design features and the recognized safety regulations and

standards. However, if instructions are not followed, it could result in

injury to the operator or other persons.

• Read and follow this Operator's manual and other manuals that

accompany the machine.

• The machine must only be used in accordance with its designated use

and the instructions set forth in the Operator's Manual.

• The machine must only be used by qualified operators who are fully

aware of the risks involved in operating the machine.

• Do not start, move or operate a damaged or malfunctioning machine.

Any mechanical problems, especially those affecting the safety of the

machine, must be repaired immediately. Only qualified technicians

shall determine how to move a damaged or malfunctioning machine to

a safe place for diagnoses and repair.

• The operator/machine owner is responsible to operate and keep the

machine in serviceable condition and, if necessary or required by law,

to require the operating or servicing persons to wear protective clothing

and safety equipment.

Operator training and knowledge

• Know the rules for the job site.

• Always keep this Operator's Manual and other manuals that

accompany the machine in their storage compartment provided in the

operator station on the machine. Immediately replace an incomplete or

illegible Operator's Manual.

• All persons working on or with the machine must read and understand

the safety information in this Operator's Manual before beginning work.

This includes persons working only occasionally on the machine, such

as performing set-up or maintenance tasks.

2-4 OM S04 us 1.6 * SSL_safety_US.fm

2

• Follow legal and other mandatory regulations relevant to accident

prevention and environmental protection. These may include handling

hazardous substances, issuing and/or wearing personal protective

equipment, or obeying traffic regulations.

• The operator/machine owner must regularly make sure that all

persons, who operate or maintain the machine, are working in

compliance with the Operator's Manual and are aware of risks and

safety factors of the machine.

Preparing for use

• Before starting the machine, always inspect the machine to make sure

that it is ready for safe work and travel operation.

• Wear close-fitting work clothes that do not hinder movement. Tie back

long hair and remove all jewelry (including rings).

• Wear protective equipment as required, for example hard hats, safety

glasses, ear protection.

Information on visibility

• Before putting the machine into operation, perform a visual check to

make sure that there are neither persons nor objects or other sources

of risk around the machine.

• When using the machine, check the surroundings constantly in order to

identify potential hazards.

• Before using the machine, before starting work or when changing

operators, make sure that all visual aids (mirrors, if equipped) work

correctly, that they are clean and adjusted in accordance with the

instructions in this Operator's Manual. The operator must follow the

local regulations.

• Do not make any changes or modifications that reduce visibility.

Reduced visibility can cause personal injury or death both for operator

and other persons.

Modifications and spare parts

• Never make any modifications, additions or conversions to the

machine and its superstructures (for example, cab, etc.), or the

machine's attachments, without the approval of Wacker Neuson. Such

modifications may affect safety and/or machine performance. This also

applies to the installation and adjustment of safety devices, as well as

to welding work on load-bearing parts.

• Spare parts must comply with the technical requirements specified by

Wacker Neuson. Contact your Wacker Neuson dealer for assistance.

OM S04 us 1.6 * SSL_safety_US.fm 2-5

2

2.6 Operator and Technician Qualifications and Basic Responsibili-

ties

Operator/Machine Owner responsibility

• Only allow trained and experienced individuals to operate, maintain, or

repair the machine. never let unauthorized or underaged persons

operate the machine.

• Clearly define the individual responsibilities of the operator and

technician for operation, maintenance and repair.

• Define the machine operator's responsibilities on the job site and for

following applicable road regulations. Give the operator the authority to

refuse instructions by other persons that are contrary to safety

• Do not allow persons to be trained or instructed by anyone other than

an experienced person. Also, never allow persons taking part in a

general training course to work on or with the machine without being

supervised by an experienced person.

Repair person qualifications

• Work on the electric system and equipment, on the undercarriage and

the steering and brake systems may be performed only by skilled

individuals who have been specially trained for such work.

• Work on the hydraulic system of the machine must be performed only

by a technician with special knowledge and experience in hydraulic

equipment.

2.7 Safety Instructions Regarding Operation

Preparing for use

• Keep the machine clean. This reduces the risk of fire hazards, such as

combustible material around the engine, and reduces the risk of injury

or operational accidents that can be caused by dirt build-up on the

accelerator pedal, mirrors (if equipped) or foot rests and steps.

• Follow all safety, warning, and information signs and labels on the

machine.

Operator Presence System

• This machine is equipped with an operator presence system that locks

out machine travel and -operation when the operator is outside of the

cab.

• Do not perform machine operation when the operator presence system

or any safety device is malfunctioning. Contact a Wacker Neuson

dealer.

• Make sure that all safety devices are properly installed and functional

before starting machine operation.

• Never disconnect any safety device.

– see chapter “ Functional check of seat bar/seat switch (canopy and

cabin)” on page 4-11

• Start and operate the machine from the seat only.

• The operator must sit in the seat, fasten and adjust the seat belt and

check if all mirrors (if equipped) are adjusted correctly before putting

the machine into operation.

• Always adjust the seat position before starting work. Do not change the

seat position during machine operation or machine travel.

2-6 OM S04 us 1.6 * SSL_safety_US.fm

2

• Make sure that all safety devices are properly installed and functional

before starting work.

• Before putting the machine/attachment into operation (starting/

moving), make sure that no one in the immediate vicinity will be at risk.

Starting and stopping

• Perform starting and stopping procedures according to this Operator's

Manual.

• Observe all indicator lights.

• Do not use starting fluid (for example, ether) especially in those cases

in which a heater or glow plug (intake air pre-heating) is used at the

same time – risk of explosions.

• Make sure the brakes, the steering, the control levers and the

signalling and light systems are functional before machine operation,

and also before restarting after an interruption of work.

• Fold up the seat bar before releasing the seat belt in order to avoid

unintentional operation.

- Lower the attachments to the ground before leaving the cab.

- Apply the parking brake with the switch.

Work area awareness

• Familiarize yourself with the surroundings and circumstances of the

work site before beginning work. Be aware of:

- obstacles in the operating and traveling area

- the soil bearing capacity

- any necessary barriers separating the work site from public roads

• Always keep at a safe distance from the edges of building pits and

slopes.

• Look out for the following when operating in buildings or in enclosed

areas:

- height of the ceiling/clearances

- width of entrances

- maximum load of ceilings and floors

- sufficient room ventilation – risk of carbon monoxide poisoning.

• Observe the danger zone. See “Danger zone awareness“.

• Use the rearview mirror (if equipped) to help stay aware of work area

obstacles and personnel.

• Always use the work lights in conditions of poor visibility and after dark.

However, make sure that users of public roads will not be temporarily

blinded by the work lights.

• Provide additional lighting of the work area if the lights of the machine

are not sufficient for performing work safely.

La page est en cours de chargement...

Wacker Neuson SW28 Manuel utilisateur

Ce manuel convient également à

Wacker Neuson SW28 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents