Samsung BHM3100 Manuel utilisateur

Catégorie
Casques mobiles
Taper
Manuel utilisateur

Ce manuel convient également à

World Wide Web
www.samsungmobile.com
Printed in China
Code No.: GH68-28533A
EU A. 04/2010. Rev. 1.0
Mono Headset
English ...................................................................................1
Français ...............................................................................27
Italiano .................................................................................53
Ελληνικά ..............................................................................79
Nederlands ........................................................................105
English
1
Getting started
Your headset overview ......................................................................... 3
Button functions
.................................................................................... 4
Charging the headset
...........................................................................5
Wearing the headset
............................................................................ 9
Using your headset
Turning the headset on or off..............................................................10
Pairing and connecting the headset
................................................... 11
Pairing via the Active pairing feature
..................................................14
Using call functions............................................................................. 15
Appendix
Frequently asked questions................................................................ 20
Warranty and parts replacement
........................................................ 22
Correct disposal of this product
.......................................................... 23
Correct disposal of batteries in this product
.......................................24
Specications
.....................................................................................25
Contents
English
2
Read this user manual before you start to use your new Bluetooth
headset.
Bluetooth
®
is a registered trademark of the Bluetooth SIG, Inc.
worldwide — Bluetooth QD ID: B016563
More information about Bluetooth is available at www.bluetooth.com.
Safety precautions
Never disassemble or modify your headset for any reason. Doing this may
cause the headset to malfunction or become combustible. Bring the headset to
an authorised service centre to repair it.
When using your headset while driving, follow local regulations in the region
you are in.
Avoid storage at high temperatures (above 50 °C/122 °F), such as in a hot
vehicle or in direct sunlight, as this can damage performance and reduce
battery life.
Do not expose the headset or any of its supplied parts to rain or other liquids.
Excessive exposure to sound at high volumes can cause hearing damage. Always
turn the volume down before plugging the earphones into an audio source and use
only the minimum volume setting necessary to hear your conversation or music.
English
3
Getting started
This section explains what to remember for the proper use of your Bluetooth
headset.
Your headset overview
Make sure you have the following items with your headset: Travel adapter,
Charging cradle, Ear rubbers, Earhook, User manual.
The items supplied with your headset may vary depending on your region.
Ear hook
Indicator light
Volume button
Charging contacts
Multi-Function button
Earpiece
4
Button functions
Multi-Function button
Press and hold to turn the headset on or off.
Press and hold to enter Pairing mode.
Press to make or answer a call.
Press to end a call.
Volume up or down button
Press to adjust the volume.
Press and hold to turn the microphone on or off.
In Pairing mode, press and hold the Volume up button to turn the Multi-point
feature on.
In Pairing mode, press and hold the Volume down button to turn the Multi-point
feature off.
You can hear a beep when the volume level of the headset reaches to the lowest or
highest level.
English
5
Charging the headset
This headset has a rechargeable internal battery which is non-removable. Ensure
that you fully charge the battery before using the headset for the rst time.
1
Plug the headset into the charging cradle.
2 Open the cover to the charger jack on the back of the charging cradle.
6
3 Plug the small end of the travel adapter into the charger jack.
4 Plug the large end of the travel adapter into a power outlet.
During charging, the indicator light will turn red. If charging does not begin,
unplug the travel adapter and plug it in again.
English
7
5 When the headset is fully charged, the indicator light changes to blue. Unplug
the travel adapter from the power outlet and remove the headset from the
charging cradle.
Use only a Samsung-approved travel adapter. Unauthorised travel adapters may
cause an explosion or damage to the headset.
The battery will gradually wear out while charging or discharging because it is
a consumable part.
While charging, the headset goes into charging mode and deactivates other
functions.
When the battery charge gets low
The headset beeps and the indicator light ashes red. Recharge the battery. If the
headset powers off during a call, the call will be automatically transferred to the
phone.
8
Checking the battery level
At the same time, press and hold the Multi-Function button and the Volume down
button. Depending on the battery level, the indicator light ashes 5 times in one of
the following colours:
Battery level Indicator light colour
Above 80% Blue
80 ~20% Violet
Below 20% Red
English
9
Wearing the headset
Place the headset on your ear. Depending on what ear you are going to wear the
headset, simply adjust the ear hook accordingly.
▲ Left ▲ Right
10
Using your headset
This section explains how to turn the headset on, pair and connect to the phone,
and use various functions.
Activated functions and features may differ depending on the phone type.
Some devices, especially those that are not tested or approved by Bluetooth SIG,
may be incompatible with your headset.
Turning the headset on or off
To turn the headset on, press and hold the Multi-Function button for 4 seconds.
The blue indicator light will ash 4 times.
To turn the headset off, press and hold the Multi-Function button for 4 seconds.
The indicator light turns off after the blue indicator light changes to red.
English
11
Pairing and connecting the headset
Pairing will create a unique and encrypted wireless link between two Bluetooth
enabled devices, such as a Bluetooth phone and a Bluetooth headset.
To use the headset with other Bluetooth devices, the devices must be paired. When
trying to pair the two devices, keep the headset and the phone reasonably close
together. After pairing, you can connect the two devices.
Pairing and connecting the headset with a phone
1 Enter Pairing mode.
Power off the headset. Press and hold the Multi-Function button
for 8 seconds until the blue indicator light stays lit.
If you turn on the headset for the rst time, it proceeds into Pairing mode
immediately.
2
Activate the Bluetooth feature on your phone and search for the headset (see
your phone’s user manual).
3
Select the headset (HM3100) from the list of devices found by your phone.
12
4 Enter the Bluetooth PIN (0000, 4 zeros) to pair and connect the headset to your
phone.
Your headset supports the Simple Pairing feature which allows the headset to be
paired with a phone without requesting a PIN. This feature is available for phones
that are compliant with Bluetooth version 2.1 or higher.
The headset also can be paired via the Active pairing feature, see page 14.
Connecting with two Bluetooth phones
With the Multi-point feature activated, your headset can be connected with two
Bluetooth phones at the same time.
1
After connecting with the rst Bluetooth phone, power off the headset.
Press and hold the Multi-Function button for 8 seconds until the blue indicator
light stays lit.
2
Press and hold the Volume up button to activate the Multi-point feature.
3 Activate the Bluetooth feature on the second Bluetooth phone and search for
the headset (see your phone’s user manual).
English
13
4 Select the headset (HM3100) from the list of devices found by the second
Bluetooth phone.
5
Enter the Bluetooth PIN (0000, 4 zeros) to connect the headset to the phone.
6 Reconnect to the headset from the rst Bluetooth phone.
You can set the headset automatically to reconnect to the recently connected
phones each time you turn it on.
To reconnect to the two most recently connected phones, activate the Multi-
point feature. Press and hold the Volume up button in Pairing mode until the
blue indicator light ashes twice.
To reconnect to only the most recently connected phone, deactivate the Multi-
point feature. Press and hold the Volume down button in Pairing mode until the
red indicator light ashes twice.
When the headset connects to two Bluetooth phones, some phones may not
connect to the headset as the second Bluetooth phone.
-
-
Disconnecting the headset
To disconnect the headset from your phone,
Turn off the headset.
Use the Bluetooth menu on your phone.
14
Reconnecting the headset
When the headset is paired with a phone, it will attempt to automatically reconnect
each time you turn it on.
If the headset does not automatically attempt to reconnect,
Press the Multi-Function button.
Use the Bluetooth menu on your phone.
Pairing via the Active pairing feature
With the Active pairing feature, your headset can automatically search for a
Bluetooth phone and try to make a connection with it.
1
Power off the headset. Press and hold the Multi-Function button for 8 seconds
to enter Pairing mode.
2
Press and hold the Multi-Function button until the violet indicator light turns on.
The headset will switch to Active Pairing mode, search a Bluetooth phone
within range, and attempt to pair with it.
English
15
Ensure the phone you wish to connect to is within range of the headset. Place the
headset and phone close to each other to avoid pairing with other devices.
The headset will attempt Active pairing for up to 20 seconds.
The Bluetooth phone you want to connect with must not be paired with other
devices. If the phone is already connected to another device, end the connection
and restart the Active pairing feature.
This feature is available for mobile phones, but the phone’s Bluetooth visibility
option must be set to on.
This feature may be unavailable depending on the some PDAs.
Using call functions
Making a call
Redialling the last number
Press the Multi-Function button to redial the last number of the most recently
connected phone.
16
Press the Multi-Function button twice to redial the last number of the other phone,
see page 12.
Depending on the phone, pressing the Multi-Function button will display call history
instead of redialling.
Dialling a number by voice
Press and hold the Multi-Function button and say a name. You can dial a number
of the rst phone.
Available call functions may vary by the phone.
Answering a call
Press the Multi-Function button to answer a call when you hear incoming call
tones.
When two calls from the two connected phones come in, you can answer the call
of the rst phone.
Ending a call
Press the Multi-Function button to end a call.
English
17
Rejecting a call
Press and hold the Multi-Function button to reject a call when a call comes in.
When two calls from the two connected phones come in, you can reject the call of
the rst phone.
This function is available only on the Hands-Free prole. For more information, see
your phone’s user manual.
Using options during a call
You can use the following functions to control your call during a call.
Adjusting the volume
Press the Volume up or down button to adjust the volume.
Muting the microphone
Press and hold the Volume up or down button to turn the microphone off so that
the person with whom you are speaking cannot hear you. When the microphone is
turned off, the headset beeps at regular intervals. Press and hold the Volume up or
down button again to turn the microphone back on.
Transferring a call from the phone to the headset
Press the Multi-Function button to transfer a call from the phone to the headset.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133

Samsung BHM3100 Manuel utilisateur

Catégorie
Casques mobiles
Taper
Manuel utilisateur
Ce manuel convient également à

dans d''autres langues