Samsung HM3100 Manuel utilisateur

World Wide Web

www.samsungmobile.com

Printed in China

Code No.: GH68-28533A

EU A. 04/2010. Rev. 1.0

Mono Headset

English ...................................................................................1

Français ...............................................................................27

Italiano .................................................................................53

Ελληνικά ..............................................................................79

Nederlands ........................................................................105

English

1

Getting started

Your headset overview ......................................................................... 3

Button functions

.................................................................................... 4

Charging the headset

...........................................................................5

Wearing the headset

............................................................................ 9

Using your headset

Turning the headset on or off..............................................................10

Pairing and connecting the headset

................................................... 11

Pairing via the Active pairing feature

..................................................14

Using call functions............................................................................. 15

Appendix

Frequently asked questions................................................................ 20

Warranty and parts replacement

........................................................ 22

Correct disposal of this product

.......................................................... 23

Correct disposal of batteries in this product

.......................................24

Specications

.....................................................................................25

Contents

English

2

Read this user manual before you start to use your new Bluetooth

headset.

Bluetooth

®

is a registered trademark of the Bluetooth SIG, Inc.

worldwide — Bluetooth QD ID: B016563

More information about Bluetooth is available at www.bluetooth.com.

Safety precautions

Never disassemble or modify your headset for any reason. Doing this may

cause the headset to malfunction or become combustible. Bring the headset to

an authorised service centre to repair it.

When using your headset while driving, follow local regulations in the region

you are in.

Avoid storage at high temperatures (above 50 °C/122 °F), such as in a hot

vehicle or in direct sunlight, as this can damage performance and reduce

battery life.

Do not expose the headset or any of its supplied parts to rain or other liquids.

Excessive exposure to sound at high volumes can cause hearing damage. Always

turn the volume down before plugging the earphones into an audio source and use

only the minimum volume setting necessary to hear your conversation or music.

•

English

3

Getting started

This section explains what to remember for the proper use of your Bluetooth

headset.

Your headset overview

Make sure you have the following items with your headset: Travel adapter,

Charging cradle, Ear rubbers, Earhook, User manual.

The items supplied with your headset may vary depending on your region.

•

Ear hook

Indicator light

Volume button

Charging contacts

Multi-Function button

Earpiece

4

Button functions

Multi-Function button

Press and hold to turn the headset on or off.

Press and hold to enter Pairing mode.

Press to make or answer a call.

Press to end a call.

Volume up or down button

Press to adjust the volume.

Press and hold to turn the microphone on or off.

In Pairing mode, press and hold the Volume up button to turn the Multi-point

feature on.

In Pairing mode, press and hold the Volume down button to turn the Multi-point

feature off.

You can hear a beep when the volume level of the headset reaches to the lowest or

highest level.

•

English

5

Charging the headset

This headset has a rechargeable internal battery which is non-removable. Ensure

that you fully charge the battery before using the headset for the rst time.

1

Plug the headset into the charging cradle.

2 Open the cover to the charger jack on the back of the charging cradle.

6

3 Plug the small end of the travel adapter into the charger jack.

4 Plug the large end of the travel adapter into a power outlet.

During charging, the indicator light will turn red. If charging does not begin,

unplug the travel adapter and plug it in again.

English

7

5 When the headset is fully charged, the indicator light changes to blue. Unplug

the travel adapter from the power outlet and remove the headset from the

charging cradle.

Use only a Samsung-approved travel adapter. Unauthorised travel adapters may

cause an explosion or damage to the headset.

The battery will gradually wear out while charging or discharging because it is

a consumable part.

While charging, the headset goes into charging mode and deactivates other

functions.

•

When the battery charge gets low

The headset beeps and the indicator light ashes red. Recharge the battery. If the

headset powers off during a call, the call will be automatically transferred to the

phone.

8

Checking the battery level

At the same time, press and hold the Multi-Function button and the Volume down

button. Depending on the battery level, the indicator light ashes 5 times in one of

the following colours:

Battery level Indicator light colour

Above 80% Blue

80 ~20% Violet

Below 20% Red

English

9

Wearing the headset

Place the headset on your ear. Depending on what ear you are going to wear the

headset, simply adjust the ear hook accordingly.

▲ Left ▲ Right

10

Using your headset

This section explains how to turn the headset on, pair and connect to the phone,

and use various functions.

Activated functions and features may differ depending on the phone type.

Some devices, especially those that are not tested or approved by Bluetooth SIG,

may be incompatible with your headset.

•

Turning the headset on or off

To turn the headset on, press and hold the Multi-Function button for 4 seconds.

The blue indicator light will ash 4 times.

To turn the headset off, press and hold the Multi-Function button for 4 seconds.

The indicator light turns off after the blue indicator light changes to red.

•

English

11

Pairing and connecting the headset

Pairing will create a unique and encrypted wireless link between two Bluetooth

enabled devices, such as a Bluetooth phone and a Bluetooth headset.

To use the headset with other Bluetooth devices, the devices must be paired. When

trying to pair the two devices, keep the headset and the phone reasonably close

together. After pairing, you can connect the two devices.

Pairing and connecting the headset with a phone

1 Enter Pairing mode.

Power off the headset. Press and hold the Multi-Function button

for 8 seconds until the blue indicator light stays lit.

If you turn on the headset for the rst time, it proceeds into Pairing mode

immediately.

2

Activate the Bluetooth feature on your phone and search for the headset (see

your phone’s user manual).

3

Select the headset (HM3100) from the list of devices found by your phone.

•

12

4 Enter the Bluetooth PIN (0000, 4 zeros) to pair and connect the headset to your

phone.

Your headset supports the Simple Pairing feature which allows the headset to be

paired with a phone without requesting a PIN. This feature is available for phones

that are compliant with Bluetooth version 2.1 or higher.

The headset also can be paired via the Active pairing feature, see page 14.

Connecting with two Bluetooth phones

With the Multi-point feature activated, your headset can be connected with two

Bluetooth phones at the same time.

1

After connecting with the rst Bluetooth phone, power off the headset.

Press and hold the Multi-Function button for 8 seconds until the blue indicator

light stays lit.

2

Press and hold the Volume up button to activate the Multi-point feature.

3 Activate the Bluetooth feature on the second Bluetooth phone and search for

the headset (see your phone’s user manual).

English

13

4 Select the headset (HM3100) from the list of devices found by the second

Bluetooth phone.

5

Enter the Bluetooth PIN (0000, 4 zeros) to connect the headset to the phone.

6 Reconnect to the headset from the rst Bluetooth phone.

You can set the headset automatically to reconnect to the recently connected

phones each time you turn it on.

To reconnect to the two most recently connected phones, activate the Multi-

point feature. Press and hold the Volume up button in Pairing mode until the

blue indicator light ashes twice.

To reconnect to only the most recently connected phone, deactivate the Multi-

point feature. Press and hold the Volume down button in Pairing mode until the

red indicator light ashes twice.

When the headset connects to two Bluetooth phones, some phones may not

connect to the headset as the second Bluetooth phone.

•

-

•

Disconnecting the headset

To disconnect the headset from your phone,

Turn off the headset.

Use the Bluetooth menu on your phone.

•

14

Reconnecting the headset

When the headset is paired with a phone, it will attempt to automatically reconnect

each time you turn it on.

If the headset does not automatically attempt to reconnect,

Press the Multi-Function button.

Use the Bluetooth menu on your phone.

Pairing via the Active pairing feature

With the Active pairing feature, your headset can automatically search for a

Bluetooth phone and try to make a connection with it.

1

Power off the headset. Press and hold the Multi-Function button for 8 seconds

to enter Pairing mode.

2

Press and hold the Multi-Function button until the violet indicator light turns on.

The headset will switch to Active Pairing mode, search a Bluetooth phone

within range, and attempt to pair with it.

•

English

15

Ensure the phone you wish to connect to is within range of the headset. Place the

headset and phone close to each other to avoid pairing with other devices.

The headset will attempt Active pairing for up to 20 seconds.

The Bluetooth phone you want to connect with must not be paired with other

devices. If the phone is already connected to another device, end the connection

and restart the Active pairing feature.

This feature is available for mobile phones, but the phone’s Bluetooth visibility

option must be set to on.

This feature may be unavailable depending on the some PDAs.

•

Using call functions

Making a call

Redialling the last number

Press the Multi-Function button to redial the last number of the most recently

connected phone.

16

Press the Multi-Function button twice to redial the last number of the other phone,

see page 12.

Depending on the phone, pressing the Multi-Function button will display call history

instead of redialling.

Dialling a number by voice

Press and hold the Multi-Function button and say a name. You can dial a number

of the rst phone.

Available call functions may vary by the phone.

Answering a call

Press the Multi-Function button to answer a call when you hear incoming call

tones.

When two calls from the two connected phones come in, you can answer the call

of the rst phone.

Ending a call

Press the Multi-Function button to end a call.

English

17

Rejecting a call

Press and hold the Multi-Function button to reject a call when a call comes in.

When two calls from the two connected phones come in, you can reject the call of

the rst phone.

This function is available only on the Hands-Free prole. For more information, see

your phone’s user manual.

Using options during a call

You can use the following functions to control your call during a call.

Adjusting the volume

Press the Volume up or down button to adjust the volume.

Muting the microphone

Press and hold the Volume up or down button to turn the microphone off so that

the person with whom you are speaking cannot hear you. When the microphone is

turned off, the headset beeps at regular intervals. Press and hold the Volume up or

down button again to turn the microphone back on.

Transferring a call from the phone to the headset

Press the Multi-Function button to transfer a call from the phone to the headset.

La page est en cours de chargement...

Samsung HM3100 Manuel utilisateur

Ce manuel convient également à

Samsung HM3100 Manuel utilisateur

dans d''autres langues

Documents connexes