Airzone Cloud Manuel utilisateur

User Manual

Airzone Cloud

EN

ES

FR

IT

PT

DE

Content

FIRST STEPS _________________________________________________________________________________________ 4

>Login ________________________________________________________________________________________ 4

>Creating an account ______________________________________________________________________ 4

>Demo mode________________________________________________________________________________ 4

ADDING A DEVICE ___________________________________________________________________________________ 5

>Connection to the Internet via Blueface _____________________________________________5

>Ethernet connection _______________________________________________________________ 5

>Wi-Fi connection ____________________________________________________________________ 6

>Connection to the Internet using the Airzone Cloud app _________________________ 7

>Association process ________________________________________________________________ 7

>Wi-Fi connection ____________________________________________________________________ 8

>Ethernet connection _______________________________________________________________ 8

>Changing Wi-Fi Network ________________________________________________________________ 9

>From a Blueface thermostat ______________________________________________________9

>From a Think thermostat __________________________________________________________9

>Releasing a device _______________________________________________________________________ 10

>From Add device ____________________________________________________________________ 10

>From Airtools ________________________________________________________________________ 10

NAVIGATION AND CONTROL ______________________________________________________________________ 11

>Sites _________________________________________________________________________________________ 12

>Site zones ____________________________________________________________________________ 12

>Schedules ____________________________________________________________________________ 13

>Widgets _______________________________________________________________________________ 15

>Site settings _________________________________________________________________________ 16

>Scenes ______________________________________________________________________________________ 19

>Running a scene ____________________________________________________________________ 19

>Adding a scene*_____________________________________________________________________ 19

>Adding an action* __________________________________________________________________ 20

>Add waiting time ____________________________________________________________________ 20

>Editing a scene ______________________________________________________________________ 21

>Deleting a scene ____________________________________________________________________ 21

>Arranging scenes ___________________________________________________________________ 21

>Zones _______________________________________________________________________________________ 22

>Zone control _________________________________________________________________________ 23

>Operation mode _____________________________________________________________________ 23

>Fan speed ____________________________________________________________________________ 23

>Purication* _________________________________________________________________________ 24

EN

3

>Eco-Adapt function _________________________________________________________________ 24

>Zone schedules _____________________________________________________________________ 25

>Zone settings ________________________________________________________________________ 26

>User Mode* __________________________________________________________________________ 27

MY ACCOUNT _________________________________________________________________________________________28

>Integrations with third party accounts _______________________________________________29

>Link third-party account ___________________________________________________________ 29

>Unlink third-party account ________________________________________________________ 30

>Change associated zone __________________________________________________________ 30

>Unlink device ________________________________________________________________________ 30

AIRTOOLS _____________________________________________________________________________________________ 31

>Advanced conguration via Bluetooth* _____________________________________________ 32

>Webserver _________________________________________________________________________________ 33

>Aidoo________________________________________________________________________________________ 34

>Bluetooth control board* _______________________________________________________________35

>Network settings* ________________________________________________________________________ 36

>Wi-Fi connection ____________________________________________________________________ 36

>Ethernet connection _______________________________________________________________ 36

>Integration*________________________________________________________________________________ 37

>Local ___________________________________________________________________________________ 37

>Integration port _____________________________________________________________________ 37

>System _____________________________________________________________________________________ 38

>Information. _________________________________________________________________________ 38

>Settings. _____________________________________________________________________________ 38

>Zone ________________________________________________________________________________________ 38

>Information. _________________________________________________________________________ 38

>Settings. _____________________________________________________________________________ 38

>Production* ________________________________________________________________________________ 38

>Settings. _____________________________________________________________________________ 38

>Aidoo Wi-Fi / Aidoo pro _________________________________________________________________ 38

>Information. _________________________________________________________________________ 38

>Settings. ______________________________________________________________________________ 38

>Aidoo pro fancoil _________________________________________________________________________ 38

>Information. _________________________________________________________________________ 38

>Settings. _____________________________________________________________________________ 38

WEATHER INFORMATION _________________________________________________________________________ 39

INCIDENTS ____________________________________________________________________________________________ 39

EN

4

You can control your Airzone system with your

Android or iOS device via the Airzone Cloud app or

via your browser at airzonecloud.com.

The Airzone Cloud app is available for download

from the Google Play Store for Android devices and

the Apple App Store for iOS devices. To download

the app, enter "Airzone Cloud" in the search ﬁeld of

your device's app store.

Once you have installed the application, you need

to associate it with your Airzone system device

(see section Add device - Using the Airzone Cloud

application).

LOGIN

If you are already an Airzone Cloud user, enter your

login details (email and password).

CREATING AN ACCOUNT

If you are not already a user, click on "New here?

Sign Up", ﬁll in the required ﬁelds and click "Sign

In". A veriﬁcation email will be sent to your email

account to conﬁrm your identity (if you do not

receive an email, please check your spam folder).

DEMO MODE

You can access the Demo mode to discover all the

features that Airzone Cloud has to offer. Try it out!

First Steps

ESEN

5

To use the Airzone Cloud platform, an Internet connection is required. This can be done via:

• Blueface.

• Airzone Cloud.

CONNECTION TO THE INTERNET VIA BLUEFACE

Ethernet connection

The Airzone Cloud Webserver Ethernet is conﬁgured in Automatic or DHCP connection mode.

It is only necessary to connect it to the router to make it operational. The server's LED will begin

to blink in green if the Internet connection has been properly established. The system warning

icon will disappear from the Blueface thermostat screen, conﬁrming that the connection has

been properly established.

If manual association is required, press the settings icon, select the Manual mode and change

the required parameters: IP address, subnet mask and gateway.

Adding a Device

ESEN

6

Wi-Fi connection

The Airzone Cloud Webserver Wi-Fi can connect to your installation's router using the Blueface

thermostat. To do so, from the User settings menu access Information > Webserver.

Press Associate router, select your network, enter your password and conﬁrm. The server's LED

will begin to blink if the Internet connection has been properly established.

The system warning icons will disappear from the Blueface thermostat screen, conﬁrming that

the association has been correctly performed.

The Airzone Cloud Webserver is conﬁgured in Automatic or DHCP connection mode. If manual

association is required, press the settings icon, select Manual mode and change the required

parameters.

ESEN

7

Association process

To connect to the Airzone device you must have the Airzone Cloud app installed on your iOS or

Android device and then follow the instructions below.

1. On the start screen or from the sidebar,

tap "Add device" to start the process.

2. Press the Search units icon. Your mobile

device will start the search for available

Bluetooth devices and display a list of

the devices found. Select the unit you

wish to associate.

If you don't ﬁnd the device on the list,

make sure you are near the device you

want to associate and press the Search

units icon again.

If your device is not listed, press

“Associate manually” and enter the MAC

and the PIN for your device.

You can ﬁnd the MAC and PIN information

in the following locations:

• Information sticker on the Webserver.

• Via the Blueface or Think thermostat

(system master thermostat with

address 1). Press Information >

Webserver.

*

*Note: If you have installed a webserver AZX6WEBSCLOUDR and your device has iOS, click on

Settings - WiFi and select the WiFi network created by the webserver for your association.

CONNECTION TO THE INTERNET USING THE AIRZONE CLOUD APP

ESEN

8

3. You can check the information and

status of the device by clicking on

Webserver Info.

Conﬁrm that the device you want to

associate is the correct one by clicking

on Yes.

4. Depending on your type of connection:

Wi-Fi connection

a. Select your Wi-Fi network and enter

your password. If your Wi-Fi network

is not found, click on Search again to

refresh the list.

To connect manually, click on

"Conﬁgure Wiﬁ-Manually" and enter

the name and password of the Wi-Fi

network you wish to associate.

Once connected to your Wi-Fi network,

press Yes to continue.

Ethernet connection

b. Connection to the Internet will be

detected automatically.

To manually conﬁgure the network

settings, click on “Network settings” and

make changes as needed.

• DHCP

• IP address

• Subnet mask

• Gateway

• DNS Server

Once you conﬁrm that your connection is

correct, press on Yes to continue.

ESEN

9

CHANGING WI-FI NETWORK

From a Blueface thermostat

From a Think thermostat

From the User settings menu access the Information parameter. Press on Webserver, perform

a new search and continue with the association (see the section Connection to the Internet via

Blueface - Wi-Fi connection).

Reset the Airzone Cloud Webserver. Access the “Advanced settings” menu by pressing and

holding down twice on Airzone. Select: Information > Webserver > Reset. Reassociate from the

Airzone Cloud app (see section Connection to the Internet using the Airzone Cloud app).

5. To ﬁnish, press on the site you want to

link the device to or select "Add new

site" and ﬁll in the following ﬁelds:

• Name

• Location

• Icon

Important: In VAF/ZS62 systems, activation of the Internet connection from the Blueface

thermostat is required before starting the association.

ESEN

10

From Add device

1. To change the Wi-Fi network currently

connected to the device, repeat the

association process described above

and click on "Change Wi-Fi Network" in

step 4.

2. Select the new Wi-Fi network you

wish to connect the device to, enter

your password and continue with the

association process described above.

RELEASING A DEVICE

1. To release the device, repeat the

association process described above

and click on Yes in step 4. Conﬁrm by

pressing on Release on the next screen.

2. Once released, press Yes to re-link the

device to an existing site or add a new

site.

From Airtools

1. On the sidebar, click on Airtools to

access advanced settings.

2. Then click on the Bluetooth icon to start

searching for devices and select the

device that you want to conﬁgure.

3. Click on “Network settings” and then

“Change Wi-Fi Network” to start

searching for Wi-Fi networks.

4. Select the new Wi-Fi network you wish

to connect the device to and enter your

password.

ESEN

11

Navigation and control

Once you have logged in with your credentials, you can access control of your Airzone system

through your Android or iOS device app and from your web browser at airzonecloud.com. The

main screen displays the sites associated with the user.

You can navigate between the various menus available using the sidebar:

User:

• Sites: View of sites associated with the user.

• My Account: Management of user data and

settings.

Advanced:

• Add device: Starts the process of associating a

new Airzone device.

• Airtools: Advanced management of the sites

associated with the user.

• Log out.

ESEN

12

SITES

Site zones

The main screen displays the information and status of a site, groups and zones as well as

allowing independent on/off control of each of them.

• Site control. Allows control of all groups and zones belonging to a site at the same time.

• Group control. Allows control of all zones belonging to a group at the same time.

• Zone control. Allows control of the individual zone independently.

Schedules

Site On/Off

Group On/Off

Zone name

Site zones

Zone On/Off

Site control

Domestic hot

water (DHW)

DHW On/Off

Set-point

temperature

Operation mode

DHW temperature

DHW set-point

temperature

Site settings

Puriﬁcation

On / Off / Auto

Room temperature,

humidity and IAQ*

*IAQ: Indoor air quality.

Visualization / Sort

zones

Weather

information

Group control

Widgets

ESEN

13

Schedules

You can create and manage your schedules from different views:

• Weekly. Displays a view of the schedules for each zone on the selected day.

• List. Shows a view with all the schedules created.

Weekly

Add schedule

List

The priority established for schedules is:

Calendar > weekly > zone schedules.

Schedules

associated to a zone

Add schedule

View schedules for

the selected day

Calendar schedule

Weekly

schedule

Weekly

schedule

Enable/disable

schedule

ESEN

14

To create a schedule, press “Add schedule” and complete the required ﬁelds. There are two

types of schedules:

• Weekly. Allows you to create a schedule by selecting days of the week and time.

• Calendar. Allows you to create a schedule by selecting a set of dates.

Weekly

Select

individual zone

Enable/disable

schedule

Name

Schedule type

Select schedule

days

Select all

Select group

Select time

On/Off Action / Mode

Operation mode

Set

temperature

Add schedule

In Calendar schedules, the "Select range" section allows you to select a period.

Calendar

Select period

Schedule type

Puriﬁcation mode

ESEN

15

Widgets

The Widgets view allows you to see information on the different widgets available, which will

vary depending on your region and your installed Airzone system.

The available widgets are as follows:

• Weather. Displays weather information and outdoor air quality for the site location.

• Indoor air quality*. Displays indoor air quality status as measured by the Airzone system’s air

quality sensor.

• Electricity rate**. Displays the electricity price corresponding to the so-called Voluntary

Price for Small Consumers (PVPC for its initials in Spanish). The PVPC 2.0 TD tariff has hourly

discrimination in three periods: Peak, Plain and Valley.

• Power consumption***. Displays the site's power consumption as measured by the

consumption meter.

Widgets

Weather

information

Power

consumption

Current price of

electricity

Tariff period

Outdoor air quality

Indoor air quality

Location

PVPC 2.0 TD tariff

Minimum price

Maximum price

* Only available for compatible Airzone systems.

** Available for sites located in Spain, Balearic Islands, Canary Islands, Ceuta and Melilla.

*** Only available for Airzone systems with consumption meter.

ESEN

16

Site settings

The Settings menu allows you to view and edit site information, groups and site zones.

You can access group and zone information by pressing on them.

Site name

Site icon

Location

Enable/disable weekly/

calendar schedules

Group information

Zone information

Site users

Leave site

Delete site

Invite user to site

Group Zone

Name

MAC

Firmware

Wi-Fi

Site color

ESEN

17

To invite users, click the + icon and ﬁll in the required ﬁelds. You can select the type of user

according to the permissions you want to allow.

• Basic. Allows the invited user to access and control zones.

• Advanced. Allows the invited user to access and control groups.

• Admin. Allows the invited user to access and control all the groups in a site.

If desired, you can click on an invited user to modify their permissions or remove the user from

a site.

Administrator

User ViewSelect user

AdvancedBasic

Delete user

Save changes

Group

Email

Type of user

Type of

user

Zone

Site users

ESEN

18

Depending on the assigned permissions, the user will be able to perform actions according to

the following table:

Basic Advanced Admin

Site/zone control

Turn on/off

Set temperature

Set mode

Set speed

Adjust slats

Site settings / Zone settings

View site/zone information

Schedules

View schedules

Create/edit/delete schedules

* Only zone schedules *

Enable/disable schedules

* Only zone schedules *

Lock schedules

Scenes

View scenes

Create/edit/delete scenes

* Scenes are by user

Unit management

Associate server

* Not dependent on user role

Add site

* Not dependent on user role

Edit site

Delete site

Add group

Edit group

Delete group

Edit zone

Delete zone

Change Wi-Fi network of a server

Sort zones within a group

Sort groups within a site

Sort a user’s sites

Move zones between groups

User management

View users

Invite users

Update user permissions

Delete users

Lock user management

Airtools

Access site list

Site/system/zone advanced settings

ESEN

19

ESEN

SCENES

Allows running and adding scenes that include several actions and waiting times between

them.

• Scene with waiting time: when you press on it, it will remain active until ﬁnished running.

You can cancel the current scene by pressing on it again.

• Scene without waiting time: when you press on it, the scene will be run instantly.

Adding a scene*

Running a scene

1. To add a new scene, press on the "+"

card in the Widgets menu or press on

the "+" icon in the scenes menu.

Scenes

Create new scene

Scenes menu

Scene run

Scene stopped

20

ESEN

* Important: Maximum of 25 scenes per user/site and maximum of 10 actions per scene.

2. Enter a scene name and select a

representation icon.

3. Then press on the "+" icon to add an

action or a waiting time between

actions.

Adding an action*

a. Select the site, group, or zones you

want to control in the action and

press on Next.

If you select DHW, you will not be able to

select other zones and vice versa.

b. Enable and select the conﬁguration

you want to include in the action:

• Switching on and off.

• Operation mode.

• Set-point temperature.

• Fan speed.

• Ionization.

Add waiting time

a. Select the waiting time between

actions in hours and/or minutes.

Maximum time between actions 4 hours.

4. Once you have added the desired

actions and waiting times, press on

Save.

Note: You can press and hold to arrange

the actions and waiting times to set the

order of actions in a scene.

La page est en cours de chargement...

Airzone Cloud Manuel utilisateur

Airzone Cloud Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents