Snom M18 KLE Manuel utilisateur

M18 KLE

SIP DECT 4-Line Deskset

User Manual

Sehwa Kim | 19.02.2019 | Revision 1.1AW | M18 (US version)

illustration scale 100%

2

User Manual

M18 KLE

SIP DECT 4-Line Deskset

Table of Contents

Copyright, Trademarks, GPL, Legal

Disclaimers 4

Important Safety Information 5

Important safety instructions............... 5

For cUL compliance only 7

Mesures de sécurité importantes 7

Mesures de sécurité importantes ....... 7

FCC part 15 ...................................... 10

Industry Canada ............................... 10

Introduction 11

About this manual ............................. 11

Product overview .............................. 12

Cordless deskset external features .. 13

Cordless deskset external features .. 14

Factory Default Line Key Settings .... 15

Directory card ................................... 15

Deskset Installation 16

Installing the backup battery ............. 16

Battery charging ............................... 17

Installing the deskset ........................ 18

Wall mounting the deskset ............... 20

Adding a corded headset.................. 21

Registering the deskset to the base . 22

Deregistering the deskset ................. 23

Locating the Deskset 24

Screen icons 24

Using the Deskset 25

Idle screen ........................................ 25

Making calls ...................................... 25

Answering Incoming calls ................. 26

Multiple Incoming Calls..................... 26

Ending a call ..................................... 26

Speakerphone .................................. 27

Volume.............................................. 27

Mute.................................................. 27

Call Waiting ...................................... 27

Ignoring Calls.................................... 27

Dismissing Calls ............................... 28

Missed Calls ..................................... 28

Answering Internal Calls ................... 28

Putting a call on hold ........................ 29

Putting a call on private hold ............ 29

Switching between two calls ............. 30

Paging another handset/desket ........ 30

Receiving a page .............................. 31

About Shared Calls........................... 31

Displaying calls on the Call List ........ 33

Barging In ......................................... 33

Call Privacy....................................... 34

Using Key System Emulation ........... 34

Transferring a call ............................. 37

Setting up a conference call ............. 38

Listening to messages ...................... 40

Using the Directory ........................... 40

Using the Call History ....................... 42

Using Speed Dial .............................. 44

Conguring the Deskset 45

3

Setting Do Not Disturb ...................... 45

Setting call forwarding ...................... 45

Blocking anonymous calls ................ 46

Dialing anonymously ........................ 46

Setting missed-call alerts.................. 47

Setting call waiting ............................ 47

Viewing deskset status ..................... 47

Setting the language......................... 48

Setting the date and time.................. 48

Setting the deskset name ................. 48

Conguring the programmable keys 49

Programmable Key Types ................ 50

Line key lights ................................... 52

Setting the screen contrast ............... 53

Backlight ........................................... 53

Setting the ringer tone and volume... 54

Setting audio mode........................... 54

Turning low battery tone on or o ..... 54

Turning key tones on or o ............... 55

Registering or deregistering your

deskset ............................................. 55

WebUI 56

Using the WebUI .............................. 56

System Status .................................. 58

Deskset Status ................................. 59

Call Settings ..................................... 59

User Preferences.............................. 61

Base Directory .................................. 62

Blacklist ............................................ 65

Remote XML ..................................... 65

Security............................................. 65

Troubleshooting 66

General issues.................................. 66

Technical Specications 67

Special characters 67

Entering special characters .............. 67

Maintenance 68

Taking care of your telephone .......... 68

Appendix - GNU General Public

License 69

4

Copyright, Trademarks, GPL, Legal Disclaimers

Snom, the names of Snom products, and Snom logos are trademarks owned by

Snom Technology GmbH. All other product names and names of enterprises are

the property of their respective owners.

Product specications are subject to change without notice.

Snom Technology GmbH reserves the right to revise and change this document

at any time, without being obliged to announce such revisions or changes

beforehand or after the fact.

Texts, images, and illustrations and their arrangement in this document are

subject to the protection of copyrights and other legal rights worldwide. Their

use, reproduction, and transmittal to third parties without express written

permission may result in legal proceedings in the criminal courts as well as civil

courts.

When this document is made available on Snom’s web page, Snom Technology

GmbH gives its permission to download and print copies of its content for the

intended purpose of using it as a manual. No parts of this document may be

altered, modied or used for commercial purposes without the express written

consent of Snom Technology GmbH.

Although due care has been taken in the compilation and presentation of the

information in this document, the data upon which it is based may have changed

in the meantime. Snom therefore disclaims all warranties and liability for the

accurateness, completeness, and currentness of the information published,

except in the case of intention or gross negligence on the part of Snom or where

liability arises due to binding legal provisions.

Our rmware includes some source code that may be used and modied by

anyone and everyone under the GNU Public License (GPL) (see “Appendix -

GNU General Public License” on page 69), provided they, in turn, make it

available to everyone else with the same licensing agreement. Please go to

https://www.snom.com/footer/source-code-gpl-open-source/ for the original GPL

license and the source code of components licensed under GPL and used in

Snom products.

5

Important Safety Information

This symbol is to alert you to important operating or servicing

instructions that may appear on the product or in this user’s manual.

Always follow basic safety precautions when using this product to

reduce the risk of injury, re, or electric shock.

Important safety instructions

When using your telephone equipment, basic safety precautions should always

be followed to reduce the risk of re, electric shock and injury, including the

following:

1. This product should be installed by a qualied technician.

2. This product should only be connected to the host equipment and never

directly to the network such as Public Switch Telephone Network (PSTN) or

Plain Old Telephone Services (POTS).

3. Read and understand all instructions.

4. Follow all warnings and instructions marked on the product.

5. Unplug this product from the wall outlet before cleaning. Do not use liquid or

aerosol cleaners. Use a damp cloth for cleaning.

6. Do not use this product near water such as near a bath tub, wash bowl,

kitchen sink, laundry tub or swimming pool, or in a wet basement or shower.

7. Do not place this product on an unstable table, shelf, stand or other unstable

surfaces.

8. Slots and openings in the back or bottom of the handset are provided for

ventilation. To protect them from overheating, these openings must not be

blocked by placing the product on a soft surface such as a bed, sofa or rug.

This product should never be placed near or over a radiator or heat register.

This product should not be placed in any area where proper ventilation is not

provided.

9. This product should be operated only from the type of power source indicated

on the marking label. If you are not sure of the type of power supplied at the

premises, consult your dealer or local power company.

10. Do not allow anything to rest on the power cord. Do not install this product

where the cord may be walked on.

11. Never push objects of any kind into this product through the slots in the

handset because they may touch dangerous voltage points or create a short

circuit. Never spill liquid of any kind on the product.

12. To reduce the risk of electric shock, do not disassemble this product, but take

it to an authorized service facility. Opening or removing parts of the handset

other than specied access doors may expose you to dangerous voltages

or other risks. Incorrect reassembling can cause electric shock when the

product is subsequently used.

6

13. Do not overload wall outlets and extension cords.

14. Unplug this product from the wall outlet and refer servicing to an authorized

service facility under the following conditions:

A. When the power supply cord or plug is damaged or frayed.

B. If liquid has been spilled onto the product.

C. If the product has been exposed to rain or water.

D. If the product does not operate normally by following the operating

instructions. Adjust only those controls that are covered by the

operation instructions. Improper adjustment of other controls may

result in damage and often requires extensive work by an authorized

technician to restore the product to normal operation.

E. If the product has been dropped and the telephone base and/or

handset has been damaged.

F. If the product exhibits a distinct change in performance.

15. Avoid using a telephone (other than cordless) during an electrical storm.

There is a remote risk of electric shock from lightning.

16. Do not use the telephone to report a gas leak in the vicinity of the leak. Under

certain circumstances, a spark may be created when the adapter is plugged

into the power outlet, or when the handset is replaced in its cradle. This is a

common event associated with the closing of any electrical circuit. The user

should not plug the phone into a power outlet, and should not put a charged

handset into the cradle, if the phone is located in an environment containing

concentrations of ammable or ame-supporting gases, unless there is

adequate ventilation. A spark in such an environment could create a re or

explosion. Such environments might include: medical use of oxygen without

adequate ventilation; industrial gases (cleaning solvents; gasoline vapors;

etc.); a leak of natural gas; etc.

17. Only put the handset of your telephone next to your ear when it is in normal

talk mode.

18. The power adapters are intended to be correctly oriented in a vertical or oor

mount position. The prongs are not designed to hold the plug in place if it is

plugged into a ceiling, under-the-table or cabinet outlet.

19. Use only the power cord indicated in this manual.

Power adapter rating: 6.0 Vdc @ 600 mA

20. For pluggable equipment, the socket-outlet shall be installed near the

equipment and shall be easily accessible.

21. In wall mounting position, make sure to mount the telephone base on the wall

by aligning the eyelets with the mounting studs of the wall plate. Then slide

the telephone base down on both mounting studs until it locks into place.

Refer to the full installation instructions in the User Manual.

22. CAUTION: Keep small metallic objects such as pins and staples away from

the handset receiver.

7

SAVE THESE INSTRUCTIONS

For cUL compliance only

Mesures de sécurité importantes

Ce symbole vous alertera d’informations importantes ou

d’instructions d’entretien pouvant apparaître dans ce guide

d’utilisation. Respectez toujours les mesures de sécurité et de

sécurité de base lorsque vous utilisez ce produit, an de réduire les

risques de blessures, d’incendie, ou d’électrocution.

Mesures de sécurité importantes

An de réduire les risques d’incendie, de blessures corporelles ou

d’électrocution, suivez toujours ces mesures préventives de base lorsque vous

utilisez votre téléphone

1. Cet appareil doit être installé par un technicien qualié.

2. Cet appareil doit être branché à un équipement hôte et jamais branché à un

réseau, tel qu’un réseau PSTN publique ou un réseau téléphonique standard

(POTS).

3. Lisez et comprenez bien toutes les instructions.

4. Observez toutes les instructions et mises en garde inscrites sur l’appareil.

5. Débranchez ce téléphone de la prise murale avant de le nettoyer. N’utilisez

pas de nettoyeurs liquides ni en aérosol. N’utilisez qu’un chion doux et

légèrement humecté.

6. N’utilisez pas ce produit près de l’eau, tel que près d’un bain, d’un lavabo,

d’un évier de cuisine, d’un bac de lavage ou d’une piscine, ou dans un sous-

sol humide ou sous la douche.

7. Ne déposez pas ce téléphone sur un chariot, support ou table chancelants.

L’appareil pourrait tomber et être sérieusement endommagé.

8. Le boîtier de l’appareil est doté de fentes et d’ouvertures d’aération situées

à l’arrière ou en dessous. An d’empêcher la surchaue, ces ouvertures ne

doivent pas être obstruées en plaçant l’appareil sur un lit, divan, tapis ou

autre surface similaires. Ne placez pas cet appareil à proximité d’un élément

de chauage ni d’une plinthe électrique. De plus, ne l’installez pas dans une

unité murale ou un cabinet fermé qui ne possède pas d’aération adéquate.

9. Ne faites fonctionner cet appareil qu’avec le type d’alimentation indiqué sur

les étiquettes de l’appareil. Si vous ne connaissez pas le voltage de votre

maison, consultez votre marchand ou votre fournisseur d’électricité.

10. Ne déposez rien sur le cordon d’alimentation. Installez cet appareil dans

un endroit sécuritaire, là où personne ne pourra trébucher sur la ligne

d’alimentation ni le cordon téléphonique modulaire.

8

11. N’insérez jamais d’objets à travers les fentes et ouvertures de cet

appareil, car ils pourraient toucher à des points de tension dangereux

ou court-circuiter des pièces, ce qui constituerait un risque d’incendie ou

d’électrocution. N’échappez pas de liquides dans l’appareil.

12. An de réduire les risques d’électrocution, ne démontez pas l’appareil, mais

apportez-le plutôt à un centre de service qualié s’il doit être réparé. En

enlevant le couvercle, vous vous exposez à des tensions dangereuses ou

autres dangers similaires. Un remontage inadéquat peut être à l’origine d’une

électrocution lors d’une utilisation ultérieure de l’appareil.

13. Ne surchargez pas les prises de courant ni les rallonges électriques, car ceci

peut constituer un risque d’incendie ou d’électrocution.

14. Débranchez cet appareil de la prise de courant et communiquez avec le

département de service à la clientèle de Snom dans les cas suivants:

A. Lorsque le cordon d’alimentation est endommagé ou écorché.

B. Si du liquide a été échappé dans l’appareil.

C. Si l’appareil a été exposé à une source d’humidité telle que la pluie ou

l’eau.

D. Si l’appareil ne fonctionne pas normalement en suivant les directives

du guide. N’ajustez que les commandes couvertes dans le guide

d’utilisation, car un mauvais réglage de celles-ci peut être à l’origine de

dommages, ce qui nécessiterait des réparations considérables pour

remettre l’appareil à son état de fonctionnement normal.

E. Si l’appareil a été échappé ou son boîtier, endommagé.

F. Si le produit ache une nette diminution de sa performance.

15. Évitez d’utiliser un téléphone (autre qu’un sans l) pendant un orage. Les

éclairs peuvent être à l’origine d’une électrocution.

16. N’utilisez pas le téléphone pour rapporter une fuite de gaz à proximité de

celle-ci. Sous certaines circonstances, une inteincelle pourrait survenir

lorsque l’adaptateur est branché à une prise de courant, ou lorsque le

combiné est déposé sur le combiné. Ceci est un événement commun

associé avec la fermeture d’un circuit électrique. L’utilisateur ne devrait

pas brancher le téléphone dans une prise de courant, et ne devrait pas

déposer le combiné chargé sur le socle, si le téléphone se trouve dans un

environnement ou la concentration de gaz inammables, sans ventilation

adéquate. Une étincelle dans ces endroits pourrait provoquer un incendie ou

une explosion. Ces environnements pourraient être l’utilisation médicale de

l’oxygène sans ventilation adéquate; le gaz industriel (dissolvants, vapeurs

d’essence, etc.); une fuite de gaz naturel, etc.

17. Placez uniquement le combiné de votre appareil près de votre oreille lorsqu’il

est en mode de conversation normal.

18. Les adaptateurs sont conçus pour être orientés en position verticale ou en

position horizontale sur le plancher.

9

19. N’utilisez que cordon d’alimentation et les piles indiquées dans ce guide

d’utilisation. Note de l’adaptateur: 6.0 Vdc @ 600 mA

20. Pour les PRODUITS À BRANCHER À UNE PRISE DE COURANT, la prise

de courant doit être installée près du produit, an d’assurer une accessibilité

sécuritaire à la prise de courant.

21. En position de montage mural, assurez-vous de monter le socle du

téléphone sur le mur en alignant les oeillets avec les goujons de xation de

la plaque murale. Ensuite, faites glisser le socle vers le bas sur les deux

goujons de xation jusqu’à ce qu’il se verrouille en place. Reportez-vous aux

instructions complètes dans la section Installation dans ce guide d’utilisation.

22. MISE EN GARDE : Éloignez les petits objets métalliques tels que les

broches de l’écouteur du combiné.

CONSERVEZ CES INSTRUCTIONS

10

Compliance

FCC part 15

This device complies with Part 15 of the FCC rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

This equipment has been tested and found to comply with the limits for a

Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to

cause harmful interference in which case the user will be required to correct the

interference at the user’s expense.

Privacy of communications may not be ensured when using this phone.

Warning: Changes or modications to this equipment not expressly approved by

the party responsible for compliance could void the user’s authority to operate

the equipment.

Caution: To maintain the compliance with the FCC’s RF exposure guideline,

place the base unit at least 20 cm from nearby persons.

For body-worn operation, this handset has been tested and meets the FCC RF

exposure guidelines when used with the accessories supplied or designated for

this product. Use of other accessories may not ensure compliance with FCC RF

exposure guidelines.

Industry Canada

This Class A digital apparatus complies with Canadian requirements:

CAN ICES-3 (A)/NMB-3(A). Cet appareil numérique de la classe A est conforme

à la norme CAN ICES-3 (A)/NMB-3(A) du Canada.

This device contains licence-exempt transmitter(s)/receiver(s) that comply with

Innovation, Science and Economic Development Canada’s licence-exempt

RSS(s).

Operation is subject to the following two conditions: (1) this device may not

cause interference, and (2) this device must accept any interference, including

interference that may cause undesired operation of the device.

Privacy of communications may not be ensured when using this telephone.

The term ‘’IC:‘’ before the certication/registration number only signies that the

Industry Canada technical specications were met.

This product meets the applicable Innovation, Science and Economic

Development Canada technical specications.

11

Introduction

About this manual

This user manual provides installation and handset conguration instructions,

and detailed instructions for using the M18 KLE SIP DECT 4-Line Deskset with

rmware version 1.0.2.1.

See “Viewing deskset status” on page 47 for instructions on how to check the

software version of your M18 KLE SIP DECT 4-Line Deskset and/or M100 KLE

SIP DECT 4-Line Base Station.

Please read Important Safety Information on page 4 of this user manual.

Please thoroughly read this user manual for all the feature operations and

troubleshooting information necessary to install and operate your handset.

Please refer to the M100 KLE Administrator and Provisioning Manual for

complete conguration instructions.

For customer service or product information, visit our website at

www.snomamericas.com .

12

Product overview

The M18 KLE SIP DECT 4-Line Deskset, combined with the M100 KLE SIP

DECT 4-Line Base Station, is a full-featured SIP endpoint business phone

system designed to work with popular hosted IP PBX services and on-premise

SIP PBXs. Once you have ordered and congured your PBX service, the deskset

enables you to make and receive calls as you would with any other business

phone. Up to 10 cordless devices (M18 KLE desksets, M10 KLE handsets, and/

or M10R KLE handsets) can be registered to the base station. Each deskset

provides calling features such as hold, transfer, conferencing, and speakerphone.

The M100 KLE SIP DECT 4-Line Base Station supports shared calls among

multiple cordless handsets/desksets with a single SIP account. With Key System

Emulation, the line keys (L1 to L4) on handsets/desksets can be congured as

KeyLine type, which enables the keys to be used as for making calls, picking up

held calls, and barging in calls.

The M18 KLE SIP DECT 4-Line Deskset features include:

• Backlit Liquid Crystal Display

• Speakerphone, Hold and Mute

• Up to 8 SIP accounts

• Up to 6 concurrent calls across all desksets

• Shared call usage on single SIP account among multiple users

• Key System Emulation

• 4 line keys (L1-L4) with LEDs

• Message waiting alert LED

• 3-way conferencing

• Corded headset support

• 500-entry local directory

• 1,000-entry base directory with entries shared on all registered handsets and

desksets

13

Quick Reference Guide

Cordless deskset external features

REDIAL

Press to redial a

number.

MESSAGES

Press to display the

Message menu.

MUTE

During a call, press

to prevent your voice

from being heard.

DND (Do not disturb)

Press once to turn the

feature on. Press again

to turn o.

pVOLq

During a call, press

to adjust the listening

volume.

Press to adjust the ringer

volume when in idle mode.

INTERCOM

Press to start making

an intercom call to

one device.

HEADSET

Press to make, answer

or hang up a call on a

corded headset.

SPEAKER

Press to turn on the

speakerphone. Press

again to turn it o.

SELECT

Press to select a menu

item.

CANCEL

Press to cancel an

operation and leave a

menu, or to ignore an

incoming call.

DELETE

While entering

numbers or letters,

press to delete

previous character.

Sehwa Kim | 19.02.2019 | Revision 1.1AW | M18 (US version)

illustration scale 100%

DIRECTORY

Press to view directory

information.

CALL HISTORY

Press to view call

history.

DIAL PAD

MENU/FUNC

Press to display the

main menu or context

menu, OR to dismiss

an incoming call.

14

CALLS

Press to manage your

own held calls and

shared calls within the

system.

Navigation keys

While in menus, press p or q to scroll through the

menus, highlight items or change settings.

While entering names or numbers, press t or u to

move the cursor to the left or right.

L1 - L4

Line keys with LEDs

for call handling. Can

be reprogrammed

as shortcuts to other

features.

MESSAGE WAITING

indicator

Flashes when an

account has a new

voice message.

Sehwa Kim | 19.02.2019 | Revision 1.1AW | M18 (US version)

illustration scale 100%

Speed dial keys

Press to dial the desired

speed dial number.

MIC

Sehwa Kim | 19.02.2019 | Revision 1.1AW | M18 (US version)

illustration scale 100%

LOWER

Press to switch to the

lower location of a speed

dial key.

HOLD

Press to put the active

call on hold.

Quick Reference Guide

Cordless deskset external features

15

Factory Default Line Key Settings

Your base station and desksets have a factory default

conguration where the line keys (L1 to L4) are set up

to handle a shared line.

• All deskset user can use the shared line via the

line keys (L1 to L4).

• The LEDs on the line keys (L1 to L4) will be on

or ashing to indicate calls in progress across all

desksets.

• A deskset user can make a new call, pick up a held shared call, or barge in a

shared call by pressing the line keys (L1 to L4).

For more information, see “Using Key System Emulation” on page 34.

Directory card

Use the directory card to record the names of the speed dial numbers you stored.

To write names on the directory card:

1. Write the information on the directory

card that comes with the package.

2. Insert the edge of the directory card in

the slot at the front of the deskset, under

the plastic cover.

16

Deskset Installation

This section assumes that your network infrastructure is established and that

your IP PBX phone service has been ordered and congured for your location.

Deskset installation involves both the backup battery and the deskset. The deskset

is powered using the supplied power adapter. The deskset can be placed on a at

surface or mounted on a wall.

Avoid placing the deskset too close to:

• Communication devices such as television sets, DVD players, or other

cordless telephones

• Excessive heat sources

• Noise sources such as a window with trac outside, motors, microwave

ovens, refrigerators, or uorescent lighting

• Excessive dust sources such as a workshop or garage

• Excessive moisture

• Extremely low temperature

• Mechanical vibration or shock such as on top of a washing machine or work

bench

Installing the backup battery

Install the backup battery, as shown below. In the event of a power failure, the

charged backup battery allows the deskset to operate. The backup battery will be

charged when you connect the AC power adapter to a wall outlet not controlled

by a wall switch.

1. Squeeze the latch tab to open the battery compartment cover.

17

2. Plug the battery connector into the port inside the compartment.

3. Place the battery in the compartment. Make sure the supplied battery with

the label THIS SIDE UP faces up, as indicated.

4. Insert the battery compartment cover tabs and then press down until the

cover clicks into place.

IMPORTANT INFORMATION

• Use only the supplied rechargeable battery or replacement battery

(model BT266342). To order a replacement battery, visit our website at

www.snomamericas.com .

• If you do not use the deskset for a long time, disconnect and remove the

battery to prevent possible leakage.

Battery charging

Once you have installed the battery, the screen indicates the battery status (see

the table below). The backup battery is fully charged after 16 hours of continuous

charging.

The following table summarizes the battery charge indicators and actions to take.

Battery indicators Battery Status Action

The screen shows and

it ashes.

Battery has enough

charge to be used for a

short time.

Charge without

interruption (at least 30

minute).

Full battery icon ( )

appears.

Battery is charged. To keep the battery

charged, place it in the

charger when not in use.

Battery Pack

BT166342/BT263342

2.4V 300mAh Ni-MH

WARNING:DO NOT BURN OR

PUNCTURE BATTERIES

MADE IN CHINA GY1224

Battery Pack

BT166342/BT263342

2.4V 300mAh Ni-MH

WARNING:DO NOT BURN OR

PUNCTURE BATTERIES

MADE IN CHINA GY1224

18

Installing the deskset

1. Install the mounting bracket for tabletop use.

Low tabletop position: Insert the xed tabs of the mounting bracket into slots

A

and

B

. Press the exible tabs into slots

C

and

D

until they click into place.

High tabletop position: Insert the xed tabs of the mounting bracket into slots

A

and

B

. Press the exible tabs into slots

C

and

D

until they click into place.

Low tabletop position

High tabletop position

B

A

C

D

C D

A B

B

19

2. Connect the coiled handset and the power cord to the deskset.

IMPORTANT INFORMATION

1. Use only the power adapter supplied with this product.

To order a replacement power adapter, visit our website at

www.snomamericas.com .

2. The power adapter is intended to be correctly oriented in a vertical or oor

mount position. The prongs are not designed to hold the plug in place if it is

plugged into a ceiling, under-the-table or cabinet outlet.

Plug the large end of the

power adapter into a power

outlet not controlled by a

wall switch.

Raise the antenna for

optimum wireless range

and performance.

Plug the small end of the

power adapter into the

power jack at the bottom of

the deskset.

Route the power adapter

cord through the slot at the

bottom of the deskset.

Plug the end of the

coiled handset cord into

the jack at the bottom of

the deskset.

20

Wall mounting the deskset

The deskset is ready for tabletop use. If you want to mount the deskset on a wall,

make sure you rst unplug the power adapter from the electrical outlet.

To mount the deskset on the wall:

1. Place your corded handset aside. Use a coin to rotate the handset tab 180

degrees. The protruding edge holds the corded handset when the deskset is

mounted on the wall.

2. Press in the direction indicated by the arrows to release and remove the

mounting bracket from the deskset.

3. Place the corded handset back to the deskset. Plug the small end of the

power adapter cord into the power jack on the back of the deskset.

4. Align the wall mounting holes on the back of the deskset with the tabs of the

standard wall plate. Push the deskset down until it clicks securely in place.

5. Plug the large end of the power adapter into an electrical outlet not controlled

by a wall switch.

Low tabletop position

High tabletop position

Protruding edge

Handset tab

La page charge ...

Snom M18 KLE Manuel utilisateur

Snom M18 KLE Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents