Avanti BCSE50R3S Manuel utilisateur

Catégorie
Boissons glacées
Taper
Manuel utilisateur
INSTRUCTION MANUAL
MANUAL DE INSTRUCCIONES
MANUEL D’INSTRUCTIONS
WCSE47R3S
WCDE46R3S BCSE50R3S
Single Zone Wine Chiller
Vinera de una zona
Cellier de une zone
Dual Zone Wine Chiller
Vinera de dos zonas
Cellier de deux zones
Beverage Cooler
Enfriador de bebidas
Refroidisseur de
breuvages
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING
INSTRUCTIONS.
Avanti Products has a policy of continuous improvement on its products and reserves the right to change materials and
specifications without notice.
Avanti Products LLC
P.O. Box 520604 - Miami, Florida 33152
www.avantiproducts.com
2
TABLE OF CONTENTS
Appliance Safety
3
Important Safeguides
4
Help Us Help You …
5
Parts and Features
6 - 8
Important Safety Instructions
9
Installation Instructions
9
Before Using Your Appliance
9
Installation of Your Appliance
9
Built-In Cabinet Instructions
9
Electrical Connection / Extension Cord / Surge Protector
10
Installing Stainless Steel Handle
11
Operating Your Appliance
12 - 14
ON/OFF Power
Setting the Temperature Control
15 - 16
Common Features For All Models
Interior Light
Door Ajar Alarm
High Temperature Alarm
Storage
Shelves
Cleaning Your Appliance
16
Power Failure
16
Moving Your Appliance
16
Energy Saving Tips
17
Charcoal Filtration System
17
Troubleshooting Guide
18
Service for Your Appliance
19
Wiring Diagram
19
Your Avanti Products Warranty
20
Instrucciones en Español
21 - 24
Instructions en Français
25 - 44
Registration Information and Registration Card
Last Page
3
APPLIANCE SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always
read and obey all safety messages.
This is the Safety Alert Symbol. This symbol alerts you to potential
hazards that can kill or injure you and others. All safety messages will
follow the Safety Alert Symbol and either the words “DANGER”,
“WARNING” or “CAUTION”.
Danger means that failure to heed this
safety statement may result in severe
personal injury or death.
Warning means that failure to heed this
safety statement may result in extensive
product damage, serious personal injury, or
death.
Caution means that failure to heed this
safety statement may result in minor or
moderate personal injury, or property or
equipment damage.
All safety messages will alert you do what the potential hazard is, tell you how to reduce the
chance of injury, and let you know what can happen if the instructions are not followed.
REFRIGERANT GAS WARNINGS
FLAMMABLE REFRIGERANT GAS
DANGER - Risk of fire or explosion. Flammable refrigerant used.
DO NOT use mechanical devices to defrost refrigerator. DO NOT puncture refrigerant
tubing.
DANGER - Risk of fire or explosion. Flammable refrigerant used. To be repaired only by trained
service personnel. DO NOT puncture refrigerant tubing.
CAUTION - Risk of fire or explosion. Flammable refrigerant used. Consult repair manual / owner’s
guide before attempting to service this product. All safety precautions must be followed.
CAUTION - Risk of fire or explosion. Dispose of property in accordance with federal or local
regulations. Flammable refrigerant used.
CAUTION - Risk of fire or explosion due to puncture of refrigerant tubing. Follow handling
instructions carefully. Flammable refrigerant used.
CAUTION - To prevent a child from being entrapped, keep out of reach of children and not in the
vicinity of the cooler.
CAUTION Flammable refrigerant used! When handling, moving and use of the refrigerator,
make sure to avoid either damaging the refrigerant tubing, or increasing the risk of a leak.
4
IMPORTANT SAFEGUIDES
Before the appliance is used, it must be properly positioned and installed as
described in this manual, so read the manual carefully. To reduce the risk of fire,
electrical shock or injury when using the appliance, follow basic precaution,
including the following:
Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter,
and do not use an extension cord.
Replace all panels before operating.
It is recommended that a separate circuit, serving only your appliance be provided. Use
receptacles that cannot be turned off by a switch or pull chain.
Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or
explosion. And do not store or use gasoline or other flammable vapors and liquids in the
vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.
Before proceeding with cleaning and maintenance operations, make sure the power line of the
unit is disconnected.
Do not connect or disconnect the electric plug when your hands are wet.
Unplug the appliance or disconnect power before cleaning or servicing. Failure to do so can
result in electrical shock or death.
Do not attempt to repair or replace any part of your appliance unless it is specifically
recommended in this material. All other servicing should be referred to a qualified technician.
FOLLOW WARNING CALL OUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL
Use two or more people to move and install appliance. Failure to do so can result in back or
other injury.
To ensure proper ventilation for your appliance, the front of the unit must be completely
unobstructed. Choose a well-ventilated area with temperatures above 60°F (16°C) and below
90°F (32°C). This unit must be installed in an area protected from the element, such as wind,
rain, water spray or drips.
The appliance should not be located next to ovens, grills or other sources of high heat.
The appliance must be installed with all electrical connections in accordance with state and
local codes. A standard electrical supply (115 V AC only, 60 Hz), properly grounded in
accordance with the National Electrical Code and local codes and ordinances is required.
Do not kink or pinch the power supply cord of appliance.
The fuse (or circuit breaker) size should be 15 amperes.
It is important for the appliance to be leveled in order to work properly. You may need to make
several adjustments to level it.
Never allow children to operate, play with or crawl inside the appliance.
Do not use solvent-based cleaning agents of abrasives on the interior. These cleaners may
damage or discolor the interior.
Do not use this apparatus for other than its intended purpose.
5
HELP US HELP YOU…
Read this guide carefully.
It is intended to help you operate and maintain
your new appliance properly.
Keep it handy to answer your questions.
If you don't understand something or you
need more assistance, please call:
Avanti Customer Service
800-220-5570
Keep proof of original purchase date (such as
your sales slip) with this guide to establish the
warranty period.
Write down the model and serial numbers.
You'll find them on a plate located on the rear
outside wall of the appliance.
Please write these numbers here:
____________________________________
Date of Purchase
____________________________________
Model Number
____________________________________
Serial Number
Use these numbers in any correspondence or
service calls concerning your appliance.
If you received a damaged appliance,
immediately contact the dealer (or builder) that
sold you the appliance.
service, check the Troubleshooting Guide. It lists
IF YOU NEED SERVICE
We're proud of our service and want you to be
pleased. If for some reason you are not happy
with the service you receive, here are some
steps to follow for further assistance.
FIRST, contact the people who serviced your
appliance. Explain why you are not pleased. In
most cases, this will solve the problem.
NEXT, if you are still not pleased, write all the
details, including your telephone number, and
send it to:
Customer Service
Avanti Products
10880 NW 30 Street
Miami, FL 33172 USA
CAUTION:
THIS APPLIANCE IS NOT
DESIGNED FOR THE STORAGE
OF MEDICINE OR OTHER
MEDICAL PRODUCTS.
6
PARTS & FEATURES
MODEL: WCSE47R3S
1
Top Hinge
2
Stainless Steel Seamless Door Frame
3
Stainless Steel Door Handle
4
Control Panel
5
Wine Shelves
6
Front Grille
7
Leveling Legs
8
Bottom Hinge
7
PARTS & FEATURES
MODELWCDE46R3S
1
Top Hinge
2
Stainless Steel Seamless Door Frame
3
Stainless Steel Door Handle
4
Upper Zone
5
Control Panel / Zone Separator
6
Lower Zone
7
Front Grille
8
Bottom Hinge
8
PARTS & FEATURES
MODEL: BCSE50R3S
1
Top Hinge
2
Stainless Steel Seamless Door Frame
3
Stainless Steel Door Handle
4
Beverage Compartment
5
Control Panel
6
Beverage Shelves
7
Front Grille
8
Bottom Hinge
9
IMPORTANT SAFETY INSTRUCTIONS
WARNING
To reduce the risk of fire, electrical shock,
or injury when using your appliance, follow
these basic precautions:
Read all instructions before using the appliance.
DANGER or WARNING: Risk of child entrapment.
Child entrapment and suffocation are not problems of the past. Junked or abandoned
appliances are still dangerous . . . even if they will “just sit in the garage a few days”.
Before you throw away your old appliance: Take off the door. Leave the shelves
in place so that children may not easily climb inside.
Never allow children to operate, play with, or crawl inside the appliance.
Never clean appliance parts with flammable fluids. The fumes can create a fire
hazard or explosion.
Do not store or use gasoline or any other flammable vapors and liquids in the vicinity
of this or any other appliance. The fumes can create a fire hazard or explosion.
-Save these instructions-
INSTALLATION INSTRUCTIONS
Before using your appliance
Remove the exterior and interior packing.
Check to be sure you have all of the following parts:
Model WCSE47R3S
Model WCDE46R3S
Model BCSE50R3S
Shelves ( 5 )
Stainless Steel Handle
Instruction Manual
Shelves ( 5 )
Stainless Steel Handle
Instruction Manual
Shelves ( 3 )
Stainless Steel Handle
Instruction Manual
Before connecting the appliance to the power source, let it stand upright for approximately 2
hours. This will reduce the possibility of a malfunction in the cooling system from handling
during transportation.
Clean the interior surface with lukewarm water using a soft cloth.
Install the handle on the left side of the door.
Installation of your appliance
This appliance is designed to be for free standing installation or built-in (fully recessed).
Place your appliance on a floor that is strong enough to support it when it is fully loaded. To
level your appliance, adjust the front levelling legs at the bottom of the appliance.
Locate the appliance away from direct sunlight and sources of heat (stove, heater, radiator,
etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical
consumption. Extreme cold ambient temperatures may also cause the unit not to perform
properly.
Avoid locating the unit in moist areas.
Plug the appliance into an exclusive, properly installed-grounded wall outlet. Do not under any
circumstances cut or remove the third (ground) prong from the power cord. Any questions
concerning power and/or grounding should be directed toward a certified electrician or an
authorized Avanti Products service center.
Built-in cabinet instructions
This unit is designed for either built-in or free standing
installation. If you plan to use this unit in a built-in
application please follow the requirements shown to the
right.
Cabinet Opening Dimensions
Inches Centimeters
Width
24
61
Depth
26
66
Height
35
89
10
Electrical connection
Warning: Improper use of the grounded plug can result in the risk of electrical shock. If the
power cord is damaged, have it replaced by an authorized Avanti service center.
This appliance should be properly grounded for your safety. The power cord of this appliance is
equipped with a three-prong plug which mates with standard three prong wall outlets to minimize
the possibility of electrical shock.
Do not under any circumstances cut or remove the third ground prong from the power cord
supplied. For personal safety, this appliance must be properly grounded.
This appliance requires a standard 115/120 Volt AC ~/60Hz electrical ground outlet with three-
prong. Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is
properly grounded. When a standard 2-prong wall outlet is encountered, it is your responsibility
and obligation to have it replaced with a properly grounded 3-prong wall outlet. The cord should be
secured behind the appliance and not left exposed or dangling to prevent accidental injury.
The appliance should always be plugged into its own individual electrical outlet which has a voltage
rating that matches the rating label on the appliance. This provides the best performance and also
prevent overloading house wiring circuits that could cause a fire hazard from overheated. Never
unplug the appliance by pulling the power cord. Always grip the plug firmly and pull straight out
from the receptacle. Repair or replace immediately all power cords that have become frayed or
otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or
at either end. When moving the appliance, be careful not to damage the power cord.
Extension cord
Because of potential safety hazards under certain conditions, it is strongly recommended that you
do not use an extension cord with this appliance. However, if you must use an extension cord it is
absolutely necessary that it be a UL/CUL-Listed, 3-wire grounding type appliance extension cord
having a grounding type plug and outlet and that the electrical rating of the cord be 115 volts and at
least 10 amperes.
Power bar with surge protection
Most electrical appliances use a series of electric control boards to operate. These boards are
very susceptible to power surges and could be damaged or destroyed.
If the appliance is going to be used in an area or if your city / country is prone to power surges /
outages; it is suggested that you use a power surge protector for all electrical devices / appliances
you use. The surge protector that you select must have a surge block high enough to protect the
appliance it is connected to. If you have any questions regarding the type and size of surge
protector needed contact a licensed electrician in your area.
Damages due to power surges are not considered a manufacturer covered defect and will void
your product warranty.
11
Installing the stainless steel handle
This appliance includes a stainless steel handle. To install the handle please follow the below
instructions:
1. Pull away the door gasket in the area where the handle is to be installed on the left side as
shown below in Illustration # 1. The gasket is easily displaced by hand, no tools are
necessary.
2. Align the handle with the screws installed. Tighten the screws using a Phillips head
screwdriver until the handle sets both flush and secured tightly against the door frame. (DO
NOT over tighten as this will cause damage to the handle assembly).
3. Replace the door gasket to its original position.
4. If you choose not to use the handle supplied, simply follow step 1 to access the installation
screws and remove them and then place the two decorative plugs into the two holes
separately. Continue on to step 3 to replace the door gasket to its original position.
Illustration # 1 Illustration # 2
1.
Gasket
3.
Phillips Head Screw Driver
2.
Phillips Head Screw
4.
Handle
12
OPERATING YOUR APPLIANCE
MODEL: WCSE47R3S
It is recommended you install the appliance in a place where the ambient temperature is between
19ºC-24ºC (66ºF-75ºF). If the ambient temperature is above or below recommended temperatures,
the performance of the unit may be affected. For example, placing your unit in extreme cold or hot
conditions may cause interior temperatures to fluctuate. The range of 5ºC-18ºC (40ºF-65ºF) may
not be reached.
Unit Temperature Range:
40º F 65º F
5º C - 18º C
Recommended temperature settings
Wine conservation:
Rose and Sparkling Wines:
Dry / White Wines:
Red Wines:
50° F - 57º F
40° F - 46º F
48° F - 54º F
57° F - 65º F
10° C - 14º C
5° C - 8º C
9° C - 12º C
14° C - 18º C
ON/OFF Power
To turn OFF the appliance, press the
button and hold 2 seconds.
Setting the temperature control
You can select temperature display setting from Fahrenheit to Celsius degree by touching the
button. Fahrenheit or Celsius degrees indicator will appear in blue color in the temperature display
window.
If you desire to change the temperature, set the temperature as you desire by touching the
or
button. First press the
button. The numbers in the display window will flash. The temperature
that you desire to set will increase 1ºF or 1ºC if you touch the
button once; on the contrary the
temperature will decrease 1ºF or 1ºC if you touch the
button once.
When you store mostly red wines, the temperature which you control by touching the above two
buttons need to be set at 15ºC-18ºC (59ºC-6F).
When you store mostly white wines, the temperature needs to be set at 10ºC-14ºC (50ºF-57ºF)
When you store mostly sparkling wines, the temperature needs to be set at 5ºC-8ºC (40ºF-46ºF)
The temperature inside the unit will be appeared in blue color in the display window.
NOTE: If the unit is unplugged, if the power is lost, or turned off, you must wait 3 to 5 minutes
before restarting the unit. If you attempt to restart before this time delay, the appliance will not start.
When you use the appliance for the first time or restart the appliance after having been shut off for
a long time, there could be a few degrees variance between the temperature you select and the
one indicated on the LED readout. This is normal and it is due to the length of the activation time.
Once the appliance is running for a few hours everything will be back to normal.
13
OPERATING YOUR APPLIANCE
MODEL: WCDE46R3S
It is recommended you install the appliance in a place where the ambient temperature is between
19ºC-24ºC (66ºF-75ºF). If the ambient temperature is above or below recommended temperatures,
the performance of the unit may be affected. For example, placing your unit in extreme cold or hot
conditions may cause interior temperatures to fluctuate. The range of 5ºC-18ºC (40ºF-65ºF) may
not be reached.
Unit Temperature Range: Upper Zone:
Lower Zone:
40º F 55º F
55º F 65º F
5º C - 13º C
13º C - 18º C
Recommended temperature settings
Wine conservation:
Rose and Sparkling Wines:
Dry / White Wines:
Red Wines:
50° F - 57º F
40° F - 46º F
48° F - 54º F
57° F - 65º F
10° C - 14º C
5° C - 8º C
9° C - 12º C
14° C - 18º C
ON/OFF Power
To turn OFF the appliance, press the
button and hold 2 seconds.
Setting the temperature control
You can select temperature display setting from Fahrenheit to Celsius degree by touching the
button. Fahrenheit or Celsius degrees indicator will appear in blue color in the temperature display
window.
The temperature range of lower zone is 13º-18ºC (55-65ºF) which is suitable for storing white and
red wines. The temperature range of upper zone is 5º-13ºC (40-55ºF) which is suitable for storing
sparkling and white wines.
If you desire to change the temperature, set the temperature as you desire by touching the
or
button. Touch the
button once to select the lower zone and once more to select the upper
zone. The numbers in the display window will flash. The temperature that you desire to set will
increase 1ºF or 1ºC if you touch the
button once; on the contrary the temperature will decrease
1ºF or 1ºC if you touch the
button once.
When you store mostly red wines, the temperature which you control by touching the above two
buttons need to be set at 15ºC-18ºC (59ºC-6F).
When you store mostly white wines, the temperature needs to be set at 10ºC-14ºC (50ºF-57ºF)
When you store mostly sparkling wines, the temperature needs to be set at 5ºC-8ºC (40ºF-46ºF)
The temperature inside the unit will be appeared in blue color in the display window.
NOTE: If the unit is unplugged, if the power is lost, or turned off, you must wait 3 to 5 minutes
before restarting the unit. If you attempt to restart before this time delay, the appliance will not start.
When you use the appliance for the first time or restart the appliance after having been shut off for
a long time, there could be a few degrees variance between the temperature you select and the
one indicated on the LED readout. This is normal and it is due to the length of the activation time.
Once the appliance is running for a few hours everything will be back to normal.
14
OPERATING YOUR BEVERAGE COOLER
MODEL: BCSE50R3S
It is recommended you install the beverage cooler in a place where the ambient temperature is
between 19ºC-24ºC (66ºF-75ºF). If the ambient temperature is above or below recommended
temperatures, the performance of the unit may be affected. For example, placing your unit in
extreme cold or hot conditions may cause interior temperatures to fluctuate. The range of 3ºC-18ºC
(37ºF-65ºF) may not be reached.
Unit Temperature Range:
37º F – 65º F
3º C - 18º C
ON/OFF Power
To turn OFF the appliance, press the
button and hold 2 seconds.
Setting the temperature control
You can select temperature display setting from Fahrenheit to Celsius degree by touching the
button. Fahrenheit or Celsius degrees indicator will appear in blue color in the temperature display
window.
If you desire to change the temperature, set the temperature as you desire by touching the
or
button. First press the
button. The numbers in the display window will flash. The temperature
that you desire to set will increase 1ºF or 1ºC if you touch the
button once; on the contrary the
temperature will decrease 1ºF or 1ºC if you touch the
button once.
NOTE: If the unit is unplugged, if the power is lost, or turned off, you must wait 3 to 5 minutes
before restarting the unit. If you attempt to restart before this time delay, the beverage cooler will
not start.
When you use the beverage cooler for the first time or restart the beverage cooler after having
been shut off for a long time, there could be a few degrees variance between the temperature you
select and the one indicated on the LED readout. This is normal and it is due to the length of the
activation time. Once the beverage cooler is running for a few hours everything will be back to
normal.
15
COMMON FEATURES FOR ALL MODELS
Interior light
Your unit is equipped with progressive lighting that will progress from off to bright when the door is
opened and darken from bright to OFF when the door is closed.
If you prefer to have the light ON at all times, simply press and hold the light ON/OFF button for
approximately 3 seconds to activate the ON mode.
The lights will remain on even if the door is opened and closed.
If you want to return to the progressive mode, simply press and hold the light ON/OFF button again
for approximately 3 seconds and the unit will return to progressive mode.
Your unit is equipped with a selectable color lighting system which will allow you to select the
interior lighting color from the standard White to Cool Blue to Warm Amber.
To change the interior lighting color simply press and release the light ON/Off button. The light
color will change from White then to Cool Blue then to Warm Amber.
Door Ajar Alarm
Your unit is equipped with an audible alarm to alert you when the door has been left open.
If at any time the door has been left open for more than 5 minutes at a time, the alarm will sound
and then will continue to sound until the door is closed completely or the unit is powered off.
HIGH Temperature Alarm
Your unit is equipped with an additional warning system that will alert you if the inside temperature
of the unit raises above 72º F / 22º C.
Once the unit has been connected and running for over 10 hours, if the inside temperature of the
unit raises above 72ºF / 22ºC, the display will flash continuously the word “HI”, if the temperature
does not lower and the display flashes “HI” for over 10 hours, then compressor will stop
automatically. This indicates there is an issue with the unit and you should turn it off and find the
cause of the temperature issue.
Storage
Many bottles may differ in size and dimensions. As such the actual number of bottles you may be
able to store may vary.
Shelves (Applies to WCSE47R3S / WCDE46R3S ONLY)
This appliance is equipped with a pull-out roller assembly and you can move the wooden shelves
out and in smoothly.
To prevent damaging the door gasket, make sure to have the door all the way opened when pulling
shelves out of the rail compartment. For easy access to the bottles, you can pull the shelves out to
their full extension.
To remove the shelves out of the rail pull each shelf out to full extension. Use a long flat
screwdriver to press down the right plastic notch as shown in Figure A and at the same time lift the
left plastic notch as shown in Figure B. Then proceed to pull out the shelf slowly.
Figure A
Figure B
16
SHELVES (MODEL BCSE50R3S ONLY)
The beverage center is equipped with the two (2) wire shelves. You can move the shelves out and
in smoothly.
To prevent damaging the door gasket, make sure to have the door all the way opened when
pulling the shelves outward.
For easy access to the storage content, you can pull the shelves outward to gain access to the
items on the rear portion of the shelf, however this unit was designed with a plastic post on
each sides of the shelf track to prevent the shelves from falling.
When removing the shelf out of the inner rail, make sure to remove all items first. Then move
the shelf to the position where the notch of shelf is exactly under the plastic post and lift the
shelf. In order to replace the shelf, repeat steps described above in reverse.
Cleaning your appliance
Turn off the power, unplug the appliance, and remove all items including shelves. Wash the inside
surfaces with a warm water and baking soda solution. The solution should be about 2 tablespoons
of baking soda to 1 cup of water.
Wash the shelves with a mild detergent solution. Wring excess water out of the sponge or cloth
when cleaning area of the controls, or any electrical parts.
Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with
a clean soft cloth. Do not use steel wool or steel brush on the stainless steel. These will
contaminate the stainless steel with steel particles and rusting may occur.
Power failure
Most power failures are corrected within a few hours and should not affect the temperature of your
appliance if you minimize the number of times the door is opened. If the power is going to be off for
a longer period of time, you need to take the proper steps to protect your contents.
Moving your appliance
Remove all items (bottles)
Tape down securely all loose items (shelves) inside your appliance.
Turn the adjustable leg up to the base to avoid damage.
Tape the door shut.
Be sure the appliance stays secure in the upright position during transportation. If you
absolutely need to transport the unit horizontally, transport the unit on its back (door on top).
Also protect outside of appliance with a blanket, or similar item.
17
Energy saving tips
The appliance should be located in the coolest area of the room, away from heat producing
appliances, and out of the direct sunlight.
Charcoal Filtration System
Your wine is a living object that breathes through the cork of its bottle. In order to preserve the
quality and taste of your fine wines, they must be stored at the ideal temperature and ambient
conditions.
Your appliance is equipped with an active charcoal filtration system to ensure air purity and to
maintain an odor free cabinet for the storage of your wines. The filter is located at the bottom of
the rear panel inside your appliance. Keep in mind, that this filter must be changed every 12
months.
Remove the bottles of wine stored on the two (2) shelves in front of the filter.
Remove the shelves and set aside to be replaced once you have changed the filter
Hold the filter and turn it at 45 degrees in the counter-clockwise direction and then pull it
out.
Remove the existing filter and replace with a new one.
Put the new filter into the hole and then turn the filter at 45 degrees in clockwise direction.
To purchase a new filter or filter assembly
call Avanti 1-800-220-5570
18
TROUBLESHOOTING GUIDE
You can solve many common appliance problems easily, saving you the cost of a possible service
call. Try the suggestions below to see if you can solve the problem before calling the servicer.
PROBLEM POSSIBLE CAUSE SOLUTION
Unit
does not
operate.
Not plugged in.
The appliance is turned off.
The circuit breaker tripped or a blown
fuse.
Plug the unit.
Press
to turn on the unit.
Check the breaker and/or fuses.
Unit
is not cold
enough.
External environment may require a
higher setting.
The door is opened too often.
The door is not closed completely.
The door gasket does not seal properly.
Check the temperature control setting.
Close the door properly.
Check the door gasket.
The compressor
turns on
and off
frequently.
The room temperature is hotter than
normal.
A large amount of contents has been
added to the unit.
The door is opened too often.
The door is not closed completely.
The temperature control is not set
correctly.
The door gasket does not seal properly.
Close the door properly.
Check the door gasket.
The fans turn on
and off frequently.
In order to circulate the air and maintain the set temperature inside the cabinet the
fans must cycle on and off even when the compressor is off. The fans will cycle ON
and OFF while the compressor is off approximately every 10 seconds, this is called
“Semi-speed status”. This cycle is normal and meant both to circulate the air as
well as ensure the continued operational status of the fans. If the fan stops
completely and does not complete this cycle the fan is non-operational.
The light does not
work.
Not plugged in.
The circuit breaker tripped or a blown
fuse.
The light button is “OFF”.
Plug the unit.
Check the breaker and/or fuses.
Vibrations.
The unit is not levelled
The bottles are vibrating.
There is an object under the Unit.
Check to assure that the Unit is level.
Make sure the bottles don’t touch each
other.
Remove the object.
The unit seems to
make too much
noise.
The Unit is not level.
Level the unit.
The rattling noise may come from the
flow of the refrigerant, which is normal.
As each cycle ends, you may hear
gurgling sounds caused by the flow of
refrigerant in your unit. Contraction and
expansion of the inside walls may
cause popping and crackling noises.
The door will not
close properly.
The Unit is not level.
The door was reversed and not
properly installed.
The gasket is dirty.
The shelves are out of position.
Level the unit.
Close the door properly.
Clean the door gasket.
Place the shelves properly.
Error Code:
E1-E2-E3-
E4-E7-E8
A sensor has failed. Contact us for a service call.
19
SERVICE FOR YOUR APPLIANCE
We are proud of our customer service organization and the network of professional service
technicians that provide service on your Avanti appliances. With the purchase of your Avanti
appliance, you can have the confidence that if you ever need additional information or assistance,
the Avanti Products Customer Service team will be here for you. Just call us toll-free.
AVANTI PRODUCTS CUSTOMER SERVICES
Product Information
800-323-5029
Whatever your questions are about our products,
help is available.
Part Orders
800-220-5570
You may order parts and accessories that will be
delivered directly to your home by personal
check, money order, Master Card, or Visa.
In-Home Repair Service
800-220-5570
An Avanti Products authorized service center will
provide expert repair service, scheduled at a time
that is convenient for you. Our trained servicers
know your appliance inside and out.
WIRING DIAGRAM
20
YOUR AVANTI PRODUCTS
WARRANTY
Staple your sales receipt here. Proof of original
purchase date is needed to obtain service
under warranty.
WHAT IS COVERED LIMITED ONE-YEAR WARRANTY
Avanti Products warrants that the product is free from defects in materials and/or workmanship for a period of
twelve (12) months from the date of purchase by the original owner. The foregoing timeline begins to run
upon the date of purchase, and shall not be stalled, tolled, extended, or suspended for any reason
whatsoever unless described in detail in the warranty document. For one year from the date of purchase by
the original owner, Avanti products will, at its option, repair or replace any part of the product which proves to
be defective in material or workmanship under normal use. Avanti Products will provide you with a
reasonably similar product that is either new or factory refurbished. During this period Avanti Products will
provide all parts and labor necessary to correct such defects free of charge, so long as the product has been
installed and operated in accordance with the written instructions in this manual. In rental or commercial use,
the warranty period is 90 days. All Avanti appliances of 4.2 cubic feet capacity or less must be brought/sent
to the appliance service center for repair.
LIMITED SECOND THROUGH FIFTH YEAR WARRANTY
For the second through the fifth year from the date of original purchase, Avanti Products will provide a
replacement compressor free of charge due to a failure. You are responsible for the service labor and freight
charges. In rental or commercial use, the limited compressor warranty is one year and nine months. Costs
involved to move the product to the service center and back to the user’s home, as maybe required, are the
user’s responsibility.
WARRANTY EXCLUSIONS / WHAT IS NOT COVERED:
The warranty coverage described herein excludes all defects or damage that are not the direct fault of Avanti
Products, including without limitation, one or more of the following:
A failure to comply with any applicable state, local, city, or county electrical, plumbing and/or building codes,
regulations, or laws, including failure to install the product in strict conformity with local fire and building
codes and regulations.
Any external, elemental and/or environmental forces and factors, including without limitation, rain, wind,
sand, floods, fires, mud slides, freezing temperatures, excessive moisture or extended exposure to
humidity, lightning, power surges, structural failures surrounding the appliance, and acts of God.
Content losses of food or other content due to
spoilage.
Incidental or consequential damages
Parts and labor costs for the following will not be
considered as warranty:
Inner door panels, door shelves, door rails,
and/or door supports.
Light bulbs and/or plastic housing.
Plastic cabinet liners.
Punctured evaporator that voids the warranty
on the complete sealed system.
Shipping and handling costs associated with the
replacement of the unit.
Repairs performed by unauthorized servicers.
Service calls that are related to external problems,
such as abuse, misuse, inadequate electrical
power, accidents, fire, floods, or any other acts of
God.
Failure of the product if it is used for other than it
intended purpose.
The warranty does not apply outside the
Continental USA.
Surcharges including but not limited to, any after
hour, weekend, or holiday service calls, tolls, ferry
trip charges, or mileage expense for service calls
to remote areas.
In no event shall Avanti Products have any liability or responsibility whatsoever for damage to surrounding
property, including cabinetry, floors, ceilings, and other structures and/or objects around the product. Also
excluded from this warranty are scratches, nicks, minor dents, and other cosmetic damages on external
surfaces and exposed parts; Products on which the serial numbers have been altered, defaced or removed;
service visits for customer education, or visits where there is nothing wrong with the product; correction of
installation problems (you are solely responsible for any structure and setting for the product, including all
electrical, plumbing and/or other connecting facilities, for proper foundation/flooring, and for any alterations
including without limitation cabinetry, walls, floors, shelving etc., as well as the resetting of breakers or fuses.
OUT OF WARRANTY PRODUCT
Avanti Products is under no obligation, at law or otherwise, to provide you with any concessions, including
repairs, pro-rates, or product replacement, once this warranty has expired.
WARRANTY REFRIGERATION - COMPRESSOR
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48

Avanti BCSE50R3S Manuel utilisateur

Catégorie
Boissons glacées
Taper
Manuel utilisateur

dans d''autres langues