Volvo 2020 Manuel utilisateur

Marque: Volvo

Modèle: 2020

Catégorie: Logiciel de navigation

Taper: Manuel utilisateur

SENSUS NAVIGATION

Sensus Navigation is a satellite-based traffic information and navi-

gation system.

Volvo works continuously to improve our product. Modifications can

mean that information, descriptions and illustrations in this supple-

ment differ from the equipment in your vehicle. We reserve the right

to make changes without prior notice.

2
NAVIGATION
Activating and deactivating the
navigation system*
4
Navigation system* symbols and
buttons
5
Information cards in the naviga-
tion system*
6
Navigation system* in center display
6
Navigation system* in the instru-
ment panel
8
Activating and deactivating the
navigation system* in the instru-
ment panel
9
Navigation system* in head-up
display*
9
Voice control for navigation system*
9
Voice control command list for the
navigation system*
12
Entering a destination directly on
the map
13
Entering a destination using an
address
14
Entering a destination with a free
text search
15
Entering a POI as a destination
16
Entering a destination using
Recent/Favorites/Library
17
Entering a destination with Send
to Car
18
Itinerary
19
 
Viewing an itinerary
19
Editing or clearing an itinerary
20
Viewing alternative routes
20
Viewing points of interest along
the route
20
Show guidance in the itinerary
21
Traffic disruptions on map
21
Show traffic disruptions along the
route
22
Selecting a detour in the naviga-
tion system*
22
Real Time Traffic Information (RTTI)
23
Activating and deactivating
enhanced traffic information
24
Navigation system* settings
24
Map settings
25
Route settings and guidance
25
Traffic information settings
26
Map updating
27
Updating maps with a computer
and USB flash drive
28
Updating maps from a vehicle
with Internet connection
31
Frequently Asked Questions
regarding the navigation system*
32
Navigation license agreements*
33
Navigation system* copyright
39
INDEX
Index 41
TABLE OF CONTENTS

NAVIGATION

NAVIGATION
* Option/accessory.
4
Activating and deactivating the
navigation system*
The navigation system is automatically acti-
vated when the driver's door is opened and is
deactivated when the driver locks and arms
the vehicle.
Activating navigation
Navigation system tile
Home button
View the map on the center display by tapping
the top tile (1) in Home view.
If the center display does not show the navi-
gation system tile, press the Home button (2)
once briefly and then tap the navigation sys-
tem tile (1).
A map will appear of the surrounding area and
the vehicle's current location (blue triangle).
Tap this symbol to display the
map across the entire center
display.
WARNING
Observe the following:
•
Direct all your attention to the road and
make sure that your concentration is
focused on driving.
•
Follow applicable traffic laws and use
good judgment while driving.
•
Road conditions can be affected by
weather or season, which may make
certain recommendations less reliable.
Deactivating navigation
While the ignition is switched on, the naviga-
tion system is always active in the back-
ground. It switches off automatically when the
ignition is switched off and the vehicle is
locked.
NOTE
The navigation system is available even
when the engine is turned off. If the battery
charge level becomes too low, the system
will switch off.
Related information
•
Navigation system* in center display
(p. 6)
•
Navigation system* in the instrument
panel (p. 8)
•
Navigation system
*
 in head-up display
*
(p. 9)
•
Voice control for navigation system*
(p. 9)
•
Navigation system* symbols and buttons
(p. 5)

NAVIGATION

* Option/accessory.

Navigation system* symbols and

buttons

The map in the center display displays sym-

bols and colors that inform the driver of dif-

ferent roads and the area around the vehicle

and along the route. A tool bar with different

buttons for different settings is shown on the

left.

Symbols and buttons on the map

Estimated time of arrival/remaining time

to arrival

Distance to destination

Compass/switches between north and

vehicle's direction of travel up

Start

Destination

Switch map view from 2D to 3D

Reset map to follow the vehicle

Point of Interest (POI

)

Traffic information

Minimize (expanded view) or maximize

the map (full screen)

The vehicle on the planned route

Minimize toolbar

Repeat most recent voice guidance

Minimize toolbar

Calculate a new route

Voice guidance temporarily On/Off

Display list of guidance points in the itiner-

ary

Set a final destination/waypoint

Cancel guidance

Shows list of the itinerary's points of inter-

est (POI

) and traffic information

Next maneuver

Itinerary and alternative route

Destination

Related information

•

Information cards in the navigation sys-

tem* (p. 6)

•

Traffic disruptions on map (p. 21)

•

Real Time Traffic Information (RTTI)

(p. 23)

•

Show traffic disruptions along the route

(p. 22)

Point of Interest

NAVIGATION

* Option/accessory.

Information cards in the navigation

system*

All icons on the map, such as destinations,

waypoints and stored favorites, have an infor-

mation card that can be opened by tapping

the icon.

Press the information card once to display a

small card, and press twice to display a larger

card with more information. The information

and possible options vary depending on the

type of icon.

For example, when a POI(

) is highlighted, the

driver can select e.g.:

•

Start navigation - save the location as a

destination

•

Add as waypoint - the position is saved

as an intermediate destination (only dis-

played at the specified destination)

•

Save - the position is saved in the library

•

Remove from itinerary - the position is

removed if it is included in the itinerary

•

Nearby POI - points of interest close to

the car's position are shown

Related information

•

Itinerary (p. 19)

•

Entering a POI as a destination (p. 16)

•

Viewing points of interest along the route

(p. 20)

Navigation system* in center

display

The navigation system can be presented and

controlled in several different ways, e.g. via

the center display.

All settings for the navigation system can be

changed in the center display. The driver can

select how the map should be displayed or

enter a destination here.

Point of Interest

NAVIGATION

}}

If the map image is not shown in the center

display, tap the top tile (for the navigation sys-

tem).

Where am I?

What is the vehicle's current geographic loca-

tion?

•

Tap the vehicle symbol (blue triangle) on

the map to display information directly on

the map.

Find the vehicle symbol on the map

After zooming out/in or moving the

map, it may be difficult to find the

vehicle's location on the map again.

Tap the crosshairs to reset the map

to follow the vehicle symbol.

North or direction of travel facing up

on the map

There are two ways to show the

vehicle's movement in relation to the

map. Tap the symbols to toggle

between the vehicle's direction of

travel or north shown facing up on

the map.

When the map is shown with north

facing up, the vehicle symbol moves in the

actual compass direction on the map. If the

vehicle is moving west, it will be shown mov-

ing left on the map (east is right, south is

down, etc.).

When the vehicle symbol is pointing up, the

map rotates under the vehicle symbol follow-

ing the turns made by the vehicle. The com-

pass symbol indicates which direction is north

(N) on the map and the direction in which the

front of the vehicle is pointing is shown in the

center of the compass:

Compass symbols Compass direction

N North

NE Northeast

E East

SE Southeast

S South

SW Southwest

W West

NW Northwest

2D or 3D view

Tap the symbols to toggle between

2D and 3D display.

With 3D display, the vehicle's direction of

travel is always up. The map rotates under the

vehicle symbols following the turns made by

the vehicle. The compass indicates which

direction is north (N) on the map and the

direction in which the front of the vehicle is

pointing is shown in the center of the com-

pass: The map scale is not shown in 3D mode.

With 2D display, the map is shown with north

facing up, and the vehicle symbols moves in

the actual compass direction on the map.

Zoom in

To make the map larger, tap the center display

twice in quick succession with one finger or

place two fingers on the center display and

move them apart ("stretch").

Zoom out

To make the map smaller, tap the center dis-

play once with two fingers or place two fin-

gers on the center display and move them

together ("pinch").

Scroll

Place one finger on the map, swipe in the

desired direction and release. The scroll func-

tion is only possible with the map in maxi-

mized view, not minimized.

||
NAVIGATION
* Option/accessory.
8
Change the headers displayed
Maximize the map and tap the map heading at
the top of the center display. The following
headers can be displayed on the map:
1.
Destination Destination, arrival time (
ETA)
or remaining travel time (RTA) and dis-
tance to destination (Distance). For more
information on selecting ETA or RTA, see
"Route settings and guidance".
2. Current position as address (Address) or
as coordinates (Coordinates). When coor-
dinates are shown, altitude is also shown
(Altitude). To choose between address
and coordinates, see section "Map set-
tings".
Related information
•
Navigation system* settings (p. 24)
•
Navigation system* in the instrument
panel (p. 8)
•
Navigation system* in head-up display*
(p. 9)
•
Route settings and guidance (p. 25)
•
Map settings (p. 25)
Navigation system* in the
instrument panel
The navigation system can be presented and
controlled in several different ways, e.g. via
the instrument panel.
The map is only shown on the 12" instrument panel.
While driving, the driver receives voice guid-
ance and instructions on the instrument panel.
Map guidance in the instrument panel can
also be activated without entering a destina-
tion.
The right-side steering wheel keypad
and instrument panel
Some of the navigation system's functions,
such as 
Take me home and Cancel
guidance, can be controlled using the right-
side steering wheel keypad. If a message is
displayed in the instrument panel, it must be
accepted or dismissed before the menu can
be displayed.
Open/close the menu. The menu will close
automatically after a period of inactivity or
after certain selections.
Scroll among the menus.
Scroll among selections in a menu.
Confirm or mark a selection.
Related information
•
Activating and deactivating the navigation
system* in the instrument panel (p. 9)
•
Navigation system* in center display (p. 6)
•
Navigation system* in head-up display*
(p. 9)

NAVIGATION

}}

* Option/accessory.

Activating and deactivating the

navigation system* in the

instrument panel

The navigation system will be automatically

displayed in the instrument panel when a

destination is set. The navigation system can

also be displayed without entering a destina-

tion.

1. Pull down the center display's Top view.

Tap

Settings.

3. Tap

My Car Displays Driver Display

Information

Tap the

Show Map radio button to dis-

play the navigation system in the instru-

ment panel without entering a destination.

Related information

•

Navigation system* in the instrument

panel (p. 8)

Navigation system* in head-up

display*

The navigation system can be presented and

controlled in several different ways, e.g. via

the head-up display.

Navigation system in windshield.

The driver can also get guidance and informa-

tion from the navigation system in the head-up

display on the lower section of the windshield.

You can make settings to specify if the naviga-

tion system should be shown in the head-up

display, as well as the position of the informa-

tion field.

Related information

•

Navigation system* in center display (p. 6)

•

Navigation system* in the instrument

panel (p. 8)

Voice control for navigation

system*

If your vehicle is equipped with Sensus

Navigation, you can use voice commands to

control parts of your navigation system.

Start navigation

Here is an introduction to how you can begin

using voice commands to control the naviga-

tion system in your vehicle.

To activate a navigation command

–

Press the steering wheel keypad's voice

control button

> You can now give commands, e.g.

Navigation", which will start a naviga-

tion dialog and show examples of com-

mands.

Using voice control to get directions to

an address

To get directions to a specific address, use the

command

Go to followed by the address. It is

important that the address is given in the right

order. To use voice control for route guidance

to an address, the address must be said in the

following order: (1) street address, (2) house

number, (3) city, as shown in the following

example.

NAVIGATION

Give the command

Go to.

> You can now say the address you

would like route guidance to.

2. Say the street, e.g. Lombard Street"

3. Say the house number, e.g. "five"

4. Say the city, e.g. "San Francisco"

The full command will then be: "

Go to

Lombard Street 5, San Francisco". Pro-

vided the address is found in the sys-

tem, the navigation system will now

provide route guidance to the address.

Using voice control for route guidance to

an address in another country or another

state

Your navigation system uploads sets of maps

for the country or state it believes your vehicle

is located in. This means that for accurate

route guidance across country or state bor-

ders, you need to first tell the system in which

country or state the address you would like

route guidance to is located. You do this by

using the command

Change country or

Change state. (Command Change state is

primarily used in the US. In the example

below, command Change country is used.)

Give the command

Change country.

> You can now input the country in which

the address you would like route guid-

ance to is located, e.g. "Canada".

2. Now input the address you want route

guidance to by following the above proce-

dure for "Using voice control for route

guidance to an address".

> In this scenario, the full command is

divided into two sub-commands:

Change country, Canada"

Go to Hastings Street, Vancouver"

If the address is found in the system,

the navigation system will now provide

route guidance to Hastings Street, Van-

couver, Canada

NOTE

After you have changed country, try to pro-

nounce the address you want route guid-

ance to in the destination country's lan-

guage. This is required because the system

automatically switches to the recognition

language of the selected country.

Using voice control for route guidance

to an address set as Home

If you have set an address as a Home location

in your navigation system, you can use a voice

command to receive route guidance to the

location.

–

Give the command Take me home.

> If the navigation system has a home

location saved, you will now receive

route guidance to the location.

Using voice control for route guidance

to a place, store or other specific

business without inputting an exact

address

Your navigation system can provide route

guidance to specific places or types of busi-

nesses, which are referred to in the system as

"points of interest" (POI

). Examples of points

of interest are restaurants, hotels, gasoline

stations, museums and tourist attractions.

Use the command

Search to search for a

point of interest. You can search for a specific

point of interest or for categories of points of

interest.

Point Of Interest

NAVIGATION

}}

NOTE

It is important to use the right command

for the option you would like route guid-

ance for. When you want route guidance to

a point of interest, use the

Search com-

mand. The command is different for route

guidance to specific addresses. Then you

should use the Go to command instead.

Searching for a specific place or business

Here, [POI name] refers to a specific place or

business (a point of interest), e.g. a hotel, a

restaurant, a city park, etc.

Give the command Search.

> You can now say the specific point of

interest you would like route guidance

to.

Say

[POI name], e.g. "Golden Gate

Bridge"

> The full command will then be:

Search Golden Gate Bridge". If the

point of interest is found in the system,

the navigation system will now provide

route guidance to the location.

Searching for a point of interest category,

e.g. stores, hotels, restaurants, museums

or other tourist attractions or businesses.

Here, [POI category] refers to specific types

of places or businesses (points of interest),

e.g. hotels, restaurants, museums, etc.

Give the command

Search.

> You can now say the type of point of

interest you would like to find and

receive route guidance to.

Say

[POI category], e.g. "restaurant"

> In this case, the full command will be:

Search restaurant". The navigation

system will now search for restaurants

around and in the vicinity of the vehicle

and display a list of these in your instru-

ment panel. The displayed list will pro-

vide suggestions from the system

based on your command. Relevant cat-

egories and nearby results will be

shown at the top of the list, followed by

other suggestions in order of relevance.

Since we are looking for a category in

this example, it may be a good idea to

select the category option that most

closely matches your search.

3. Select the category from the list that best

matches what you searched for, in this

case "restaurant(s)", by saying the row

number shown in the instrument panel for

that option.

> You can now see your search results

and select an option.

Using voice control to cancel route

guidance

You can use voice commands to cancel route

guidance, including all waypoints and the final

destination.

–

Give the command Clear itinerary.

> The navigation system will cancel route

guidance and delete the final destina-

tion and all waypoints along the route.

Inputing zip codes and house numbers

Number commands can be given in different

ways depending on the function to be con-

trolled:

•

Zip codes should be given by stating each

number individually, e.g. "zero three one

two two four four three" (03122443).

•

Addresses can be given by stating each

number individually or in a group, e.g. two

two or twenty-two (22). You can also

state the numbers in hundreds, e.g. 19

hundred 22 (1922). For English and Dutch

language settings, groups of numbers can

also be said in sequence, e.g. twenty-two

NAVIGATION

* Option/accessory.

twenty-two (22 22). For English, double

or triple digits can also be used, e.g. dou-

ble zero (00). Numbers in the range

02300 can be used.

Related information

•

Voice control command list for the naviga-

tion system* (p. 12)

Voice control command list for the

navigation system*

Several of the navigation system's functions

can be activated with voice commands. Here

is a list of these.

Tap on the right-side steering wheel key-

pad and say one of the following commands:

•

Navigation" - Starts a navigation dialog

and displays examples of commands.

•

Take me home" - Guidance is provided

to the location set as

Home.

•

Go to [city]" - Inputs a city as a destina-

tion, e.g. "Go to San Francisco".

•

Go to [address]" - Inputs an address as

a destination. An address must contain

city and street. e.g. "Go to Filbert Street 5,

San Francisco".

•

Add intersection" - Starts a dialog to

input two streets. The destination will then

be the intersection of these two streets.

•

Go to [zip code]" - Input a zip code as

the destination. e.g. "Go to 1 2 3 4 5".

•

Go to [contact]" - Input an address from

the phone book as the destination. Exam-

ple "Go to Robyn Smith".

•

Search [POI category]" - Search Points

of Interest (POI) in a certain category (e.g.

restaurants)

. To sort the list along the

route, say "

Along the route" when the list

of results is displayed.

•

Search [POI category] in [city]" -

Searches for POIs in a certain category

and city. The list of results is sorted based

on the center point of the city. Example

"Search restaurant in San Francisco".

•

Search [POI name]". Example "Search

Zuni Café".

•

Change country/Change state

5,6

" -

Changes the search area for navigation.

•

Show favorites" – Displays stored loca-

tions in the instrument panel.

•

Clear itinerary" - Deletes all stored way-

points and destinations in an itinerary.

•

Repeat voice guidance" - Repeats the

most recent guidance instruction.

•

Turn off voice guidance" - Guidance off.

•

Turn on voice guidance" - Guidance on.

The user can choose to call the POI or enter it as a destination.

For European countries, "country" is used instead of "state".

For Brazil and India, search area is changed in the center display.

NAVIGATION

}}

* Option/accessory.

The following commands can usually be used

in any situation:

•

Repeat" - repeats the most recent voice

command in the current dialog.

•

Help" - initiates a help dialog. The sys-

tem responds with commands that can be

used in the current situation, an instruc-

tion or an example.

•

Voice control can be canceled when the

system is silent and when it is speaking.

•

Cancel" – cancels the dialog when

the system is silent.

•

Press and hold

until you hear two

beeps – cancels the dialog even if the

system is speaking.

Addresses

When an address is entered, the search area is

defined as the search area that is preset in the

navigation system. You can change to another

search area. If the new search area has a dif-

ferent language than the set system language,

the system will automatically switch to

another recognition engine. Because of this,

the address should be given in the language

used in the new search area.

NOTE

Note that addresses are searchable only

for the country or state the navigation sys-

tem is set to. To search for addresses in

another country or state, you must first

change the search area.

Related information

•

Voice control for navigation system* (p. 9)

Entering a destination directly on

the map

A destination can be specified in different

ways in the navigation system* – tapping a

point on the map with your finger is one of

them.

It is often easiest to scroll to the desired posi-

tion on the map and tap it.

1. Make sure the map is in full-screen mode.

2. Scroll to the desired location on the map.

3. Press and hold the location. An icon will

be created and a menu will appear.

Select

Go here to start guidance.

Deleting the icon

To delete the location's icon:

•

Select

Delete

Changing the icon's location

To change the location of the icon:

•

Press and hold the icon, drag it to the

desired location and then release it.

Related information

•

Itinerary (p. 19)

•

Entering a destination using an address

(p. 14)

•

Entering a destination with a free text

search (p. 15)

•

Entering a POI as a destination (p. 16)

NAVIGATION
* Option/accessory.
14
•
Entering a destination using Recent/
Favorites/Library (p. 17)
•
Entering a destination with Send to Car
(p. 18)
•
Route settings and guidance (p. 25)
Entering a destination using an
address
There are several ways to set a destination in
the navigation system*. Entering an address
is one of them.
1. When the map appears, expand the tool-
bar using the down arrow on the left-hand
side and tap 
Set dest.
> The map will switch to free text search.
2.
Tap 
Address.
3. It is not necessary to fill in all of the fields.
For guidance to a city, for example, you
only need to fill in the city and country.
You will then be guided to the center of
the city.
4. Select any available field and use the cen-
ter display's keyboard to type:
•
Country/State/Province
•
City/Territory/Zip code
•
Address
•
Number
•
Junction
For vehicles with Volvo On Call, it is also pos-
sible to send addresses and destinations to
the vehicle's navigation system via the Volvo
On Call app.
Related information
•
Itinerary (p. 19)
•
Entering a destination directly on the map
(p. 13)
•
Entering a destination with a free text
search (p. 15)
•
Entering a POI as a destination (p. 16)
•
Entering a destination using Recent/
Favorites/Library (p. 17)
•
Entering a destination with Send to Car
(p. 18)
•
Route settings and guidance (p. 25)
•
Information cards in the navigation sys-
tem* (p. 6)

NAVIGATION
* Option/accessory.
15
Entering a destination with a free
text search
A destination can be set in different ways in
the navigation system* - with free text
searching, for example, a search can be made
using phone numbers, postal codes, streets,
cities, coordinates and points of interest
(POI
7
).
The center display's keyboard can be used to
type most characters and to search for desti-
nations.
1. When the map appears, expand the tool-
bar using the down arrow on the left-hand
side and tap 
Set dest.
> The map will switch to free text search.
2. Enter a search word in the search box or
limit the search results by choosing a fil-
ter.
> The search results will be listed as you
type.
3. If the search provided the desired result
– tap a search result to display its informa-
tion card and select to continue using the
search result.
If the search provided too many results
– tap 
Advanced filter to select a position
to search around and then select a search
result to continue using it:
•
Around vehicle.
•
Around destination – only displayed if
a destination has been set.
•
Along route – only displayed if a desti-
nation has been set.
•
Around point on map.
Coordinates
A destination can also be entered using map
coordinates.
•
Enter coordinates, e.g. "N 58.1234 E
12.5678" and tap 
Search.
Compass directions N, E, S and W can be
entered in different ways, e.g.:
N 58,1234   E 12,5678 (with space)
N58,1234   E12,5678 (without space)
58,1234N   12,5678E (with compass direc-
tions after the coordinates)
58,123412,5678 (with hyphen without
compass direction)
Either a dot [.] or a comma [,] can be used.
Related information
•
Itinerary (p. 19)
•
Entering a destination directly on the map
(p. 13)
•
Entering a destination using an address
(p. 14)
•
Entering a POI as a destination (p. 16)
•
Entering a destination using Recent/
Favorites/Library (p. 17)
•
Entering a destination with Send to Car
(p. 18)
•
Route settings and guidance (p. 25)
7
Point of Interest

NAVIGATION
* Option/accessory.
16
Entering a POI as a destination
A destination can be specified in different
ways in the navigation system* - selecting a
point of interest (POI
8
) is one of them.
1. When the map appears, expand the tool-
bar using the down arrow on the left-hand
side and tap 
Set dest.
> The map will switch to free text search.
2.
Tap 
POI.
3. Tap the desired filter (some alternatives
are only shown when a destination or
waypoint is specified):
•
Near the vehicle
•
Near the destination
•
Near waypoint
•
Along route
•
Around point on map
4. Scroll to the desired POI and select it.
> The information card will appear.
5.
Select 
Start navigation or Add as
waypoint.
Many POI (e.g. restaurants) have sub-catego-
ries (e.g. fast food).
Which POI are shown on the map can be
changed via the map settings. This setting
does not affect searches for POI to be used as
destinations (even POI that have not been
selected for display can be shown here as
alternate destinations).
Certain POI will only appear on the map if the
scale is greater than 1 km (1 mile).
NOTE
•
The symbols, number and variants of
POIs vary between different markets.
•
In connection with map data updating,
some symbols may be added and oth-
ers disappear – all symbols for the
map system in question can be found
through the menu system.
Related information
•
Itinerary (p. 19)
•
Entering a destination directly on the map
(p. 13)
•
Entering a destination using an address
(p. 14)
•
Entering a destination with a free text
search (p. 15)
•
Entering a destination using Recent/
Favorites/Library (p. 17)
•
Entering a destination with Send to Car
(p. 18)
•
Map settings (p. 25)
8
Point of Interest

NAVIGATION

}}

* Option/accessory.

Entering a destination using

Recent/Favorites/Library

A destination can be specified in different

ways in the navigation system* - selecting

from a list is one of them.

1. When the map appears, expand the tool-

bar using the down arrow on the left-hand

side and tap

Set dest.

> The map will switch to free text search.

2. Select one of these lists at the top of the

screen:

•

Recent

•

Favorites

•

Library

After an option in a list has been marked, it

can be added as a destination by tapping

either the

Start navigation or Add as

waypoint button.

Recent

This is a list of previous searches. Scroll

through the list and select.

This is also available as a menu option in the

instrument panel and can be displayed using

the right-side steering wheel keypad.

Use

Edit to delete one or more items in the

list.

Favorites

This is a list of the locations from the

Library

that have been set as favorites. Scroll through

the list and select.

A position that has been deleted in

Favorites

will remain in Library, but with a grayed-out

star. To return a position to Favorites, go to

Library and mark the position's star again.

Use

Set Home address to program a fre-

quently used destination. An entered Home

destination is also available as a menu option

in the instrument panel and can be displayed

using the right-side steering wheel keypad.

Use

Edit to delete one or more items in the

list.

Library

This is a list of saved locations and itineraries.

The most recently saved will be shown at the

top of the list.

Tap the location's star to select/deselect it as

a favorite. A location with a selected (filled in)

star will also be displayed under the

Favorites

heading.

If a location is deleted in

Library, it will also be

deleted in Favorites.

The Library can be sorted in various ways:

•

Added - sort in chronological order.

•

Name - sort in alphabetical order.

•

Distance - sort according to distance

from the vehicle's current location.

•

Received - locations sent to the vehicle

using the Send to Car function will be fil-

tered out. New unread locations have a

BLUE marker that is grayed out once the

positions have been read.

Use

Edit to delete one or more items in the

list.

To edit a stored location in

Library

, mark the

location in the list and select

Edit position

You can, for example, change the name of the

location, move it on the map by dragging and

dropping it, or add a phone number or email

address.

Related information

•

Itinerary (p. 19)

•

Entering a destination directly on the map

(p. 13)

•

Entering a destination using an address

(p. 14)

•

Entering a destination with a free text

search (p. 15)

•

Entering a POI as a destination (p. 16)

NAVIGATION
* Option/accessory.
18
•
Entering a destination with Send to Car
(p. 18)
•
Route settings and guidance (p. 25)
Entering a destination with Send
to Car
A destination can be specified in different
ways in the navigation system* – using the
Send to Car function is one of them.
Sending a location to the vehicle
Send to Car is a function that makes it possi-
ble to add a destination/location to the vehi-
cle's navigation system from a computer.
Send to Car can also be used from the Volvo
On Call app.
To use Send to Car, a Volvo ID must be regis-
tered to the vehicle.
An example of a map service provider for
which Send to Car can be used is
wego.here.com
Receiving and using a location in the
vehicle
In order for the vehicle to receive data, it must
be connected to the Internet. If the location
was sent to the vehicle using Volvo On Call,
the vehicle's integrated modem will be used to
receive the data, i.e. no other Internet connec-
tion is required.
1. When the vehicle has received a location,
a notification will appear in the center dis-
play. Tap the notification/symbol.
> An information card will open.
2. Select how you would like to use the loca-
tion.
Using a stored location
Received locations are saved in the navigation
system's library for later use.
Related information
•
Itinerary (p. 19)
•
Entering a destination directly on the map
(p. 13)
•
Entering a destination using an address
(p. 14)
•
Entering a destination with a free text
search (p. 15)
•
Entering a POI as a destination (p. 16)
•
Entering a destination using Recent/
Favorites/Library (p. 17)
•
Route settings and guidance (p. 25)