EDIFIER TWS1 Pro Manuel utilisateur

Taper
Manuel utilisateur
TWS1 Pro
True Wireless Stereo Earbuds
www.edifier.com
Product description and accessories
Note:
There are different size of ear tips attached in the package, please select the suitable ones to wear.
Images are for illustrative purposes only and may differ from the actual product.
Touch button
Indicator
Charging case
Charging cable
Ear tips
User guide
Warning: The rechargeable batteries that provide power for this product must be disposed properly for
recycling. Do not dispose of batteries in fire to prevent an explosion.
Charge the earbuds
You may hear a warning tone when at low battery level,
please place the earbuds in the case for charging.
Charging time: around 1.5 hours for a full charging
Charge the charging case
Indicator steady lit = charging
Indicator off = fully charged
Charging time: around 40 minutes for a full charging
Indicator
When the charging case is opened/closed, the indicator will
show the cases battery level;
if flashes three times slowly: high battery level;
if flashes twice slowly: medium battery level;
if flashes once slowly: low battery level;
if flashes three times rapidly: excessively low battery level,
please charge the case in time.
Input: 5V 60mA(earbuds)
5V 1.5A(charging case)
Bluetooth connection
Power on when taken out of
the charging case
For initial connection, the earbuds will
auto-enter the pairing mode after taken out;
When connected to other mobile phones,
take the earbuds out and press and hold the
touch button of the left or right earbud for
around 2-3 seconds to enter Bluetooth
paring.
Bluetooth pairing: red and blue lights
flash rapidly.
Search for and connect to "EDIFIER TWS1 Pro", after pairing is successful,
the blue light will flash slowly.
TWS pairing of the left and right earbuds
Clear pairing records
Functional operation
Accept a call: single click the left or right earbud
Decline/end a call: press and hold the left or right
earbud
Pause/play: single click the left or right earbud
Previous track: double click the left earbud
Next track: double click the right earbud
Volume up: press and hold the right earbud
Volume down: press and hold the left earbud
The left and right earbuds have finished TWS
pairing before leaving factory.
When the earbuds are in the charging case,
respectively click the touch buttons of the left and
right earbuds for 5 times to enter TWS pairing
mode, the blue light will flash rapidly.
After pairing is done, the blue light will flash
rapidly and then the red light will be steady lit.
When the earbuds are powered on and
interconnected, and not connected with any
Bluetooth device, press and hold the touch button
of the left or right earbuds for 8 seconds to clear
pairing records of both earbuds.
FAQs
When charging the charging case, the indicator is off_.
Please ensure the charging case is correctly connected with power source.
No sound
Check if the earbuds are operating.
Check if the earbuds volume are at an appropriate level.
Check if the earbuds are correctly connected with mobile phone.
Check if the earbuds are operating within a normal working range.
The call quality of the earbuds are not good.
Check if mobile phone is in an area with strong signal.
Please ensure the earbuds are within effective distance (10m) and no obstacle between the earbuds
and mobile phone.
When playing music, cannot control pause/play/previous track/next track via the earbuds.
Please ensure the paired device support AVRCP (Audio/Video Remote Control Profile) profile.
Maintenance
If not used for long periods of time, please charge the product with lithium battery every three
months.
Keep the product away from humid places to avoid affecting internal circuit. Do not use the
product during intense exercise or with much sweat to prevent sweat from dropping into the
product to make damage.
Do not put the product in places exposed to sun or with high temperature. High temperature will
shorten service life of electronic components, damage battery and make plastic components
deformed.
Do not put the product in cold places to avoid damaging internal circuit board.
Do not dismantle the product. Non-professional personnel may damage the product.
Do not drop, strongly vibrate, strike the product with hard object to avoid damaging internal
circuit.
Do not use drastic chemicals or cleaner to clean the product.
Do not use sharp objects to scratch product surface to avoid damaging shell and affecting facade.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
A warning that batteries (battery pack or batteries installed) shall not be exposed to excessive heat
such as sunshine, fire or the like.
---------------------------------------------------------------------------------------------------------------------------
------
---------------------------------------------------------------------------------------------------------------------------
------
"To prevent possible hearing damage, do not listen at high volume levels for long periods."
"Fully understand user manual before use."
"Ensure your player at low volume levels or power off before you leaving."
---------------------------------------------------------------------------------------------------------------------------
------
Correct Disposal of this product. This marking indicates that this product should not be disposed with
other household disposal, recycle it responsibly to promote the sustainable reuse of material resources.
To return your used device, please use the return and collection systems or contact the retailer where
the product was purchased. They can take this product for environmental safe recycling.
WARNING!
Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent
type.
For products with removable battery, the battery must be properly recycled or disposed. For products
with built-in battery, disassembling is prohibited.
Never disassemble, hit with force, squeeze batteries or dispose of batteries in fire. Do not expose
batteries in conductive materials, liquid, fire or heat. Do not let metal object contact two battery poles.
If the battery looks swollen, leaking, discolored, having odor or any abnormal appearance, stop using
it. Do not use the battery after immersed in water.
Improper use of battery may lead to explosion or leakage, causing skin burn or other injuries; in the
event of battery leakage, handle it with care and immediately dispose of the battery in the manner in
compliance with applicable laws and regulations in your locality.
The battery subjected to extremely low air pressure that may result in an explosion or the leakage of
flammable liquid or gas
Warning!
Please read the manual carefully. Keep it in safe place for future reference.
Use the product properly by following the instructions in the manual.
Using the product in a 0-35 environment is recommended.
Supervise children under 14 when using the product, the product is not a toy.
To reduce the risk of fire and electric shock, do not expose the product to rain or moisture.
Do not use the product near any heat source (e.g. radiator, heater, stove, or other devices that
generate heat).
Consult local staff before using the product near medical or industrial equipment or on board an
aircraft.
Never use strong acid, alkali, gasoline, alcohol, or other chemical solvents to clean the product
surface. Use only neutral solvent or clear water for cleaning.
To prevent possible hearing damage, do not listen at high volume level for long periods. Therefore,
always set the volume to an appropriate level.
For traffic safety, do not use the product while driving, cycling or crossing a road.
FCC statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
FCC ID: Z9G-EDF107
IC: 10004A-EDF107
received, including interference that may cause undesired operation.
IC statement: CAN ICES-3(B)/NMB-3(B).
FCC Regulatory Compliance
Warning: changes or modifications not expressly approved by the party responsible for compliance
could void the users authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Compliance
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
claration FCC:
Cet appareil est conforme à la partie 15 des gles FCC. Son utilisation est soumise aux deux conditions
suivantes:
(1) cet appareil ne doit pas causer d'interférences nuisibles, et (2) cet appareil doit accepter toute
interférence reçue, y compris les interférences susceptibles de provoquer un fonctionnement
indésirable.
claration IC: CAN ICES-3(B)/NMB-3(B).
ISED Regulatory compliance
This device contains licence-exempt transmitters that comply with Innovation, Science and Economic
Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of
the device.
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled
environment.
L’émetteur exempt de licence contenu dans le présent appareil est conforme aux CNR dInnovation,
Sciences et veloppement économique Canada applicables aux appareils radio exempts de licence.
Lexploitation est autorisée aux deux conditions suivantes :
Lappareil ne doit pas produire de brouillage;
Lappareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible den
compromettre le fonctionnement.
Cet équipement est conforme aux limites d'exposition aux radiations IC CNR-102 établies pour un
environnement non contrô.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11

EDIFIER TWS1 Pro Manuel utilisateur

Taper
Manuel utilisateur

dans d''autres langues