EDIFIER GM3 Plus Manuel utilisateur

Marque: EDIFIER

Modèle: GM3 Plus

Taper: Manuel utilisateur

GM3 Plus 出口英文说明书

尺寸：80*80mm

材质：80g书写纸，印80%灰

页数：3页6面

Red LED lit in a breathing pattern = charging LED oﬀ = fully charged

Charging time: around 1.5 hours

Input: 5V 200mA(Earbuds) 5V 1A(Charging case)

Product Description and Accessories

Charge

Power ON/OFF

Brand card Brand sticker User manual

Power ON: Take earbuds out of the charging case, or press and hold the touch

panel for 3s.

Power OFF: Put the earbuds in the charging case. The earbuds will power oﬀ

automatically if there is no connection after 3 minutes.

Charging case

Place the earbuds in the charging case for charging.

After the indicator on the charging case turn on to indicate battery level:

LED on the left lit in a breathing pattern = left earbud is charged

LED on the right lit in a breathing pattern = right earbud is charged

LED oﬀ = fully charged

Earbuds

Charging cable

Touch panel Indicator

Microphone

Earbuds Charging case

Note:

• Please do not charge the product when there is sweat or other liquids inside the

charging port, which may damage the product.

• Images are for illustrative purposes only and may diﬀer from the actual product.

3sPower on:

TRUE WIRELESS GAMING EARBUDS

Model: EDF700035

FCC ID: Z9G-EDF194

IC: 10004A-EDF194

Ediﬁer International Limited

P.O. Box 6264

General Post Oﬃce

Hong Kong

www.ediﬁer.com

Printed in China

www.hecategaming.com

NOTICE:

For the need of technical improvement and system upgrade, information

contained herein may be subject to change from time to time without

prior notice.

Products of EDIFIER will be customized for diﬀerent applications.

Pictures and illustrations shown on this manual may be slightly diﬀerent from actual product.

If any diﬀerence is found, the actual product prevails.

Hereby, Ediﬁer International Limited declares that the radio equipment type EDF700035 is in

compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is

available at the following internet address: https://www.ediﬁer.com/int/eu-doc.html

Controls

Touch Panel

Accept/end a call

Reject a call

Play/pause

Input：5V 200mA (Earbuds）

5V 1A (Charging Case)

Previous track(left earbud)

Next track(right earbud)

Voice assistant(left earbud)

Music/game mode(right earbud)

Pairing

• For initial use, the earbuds will auto-on and enter Bluetooth pairing state when

taken out of the case (prompt tone: Pairing).

• Select "HECATE GM3 Plus" in your device setting to connect, wait until you hear

the prompt tone of "Connected", then the pairing is successful.

Bluetooth

Setting

HECATE GM3 Plus

My Device

Reset

In OFF state, press and hold either earbud for 8s to reset. The reset is successful

when hearing the prompt tone of "Power on", "Pairing" and "Power oﬀ" one after

another.

This equipment complies with ISED radiation exposure limits set forth for an

uncontrolled environment. This equipment could be installed and operated with

minimum distance 0 cm between the radiator and your body. End user must follow

the speciﬁc operating instructions for satisfying RF exposure compliance. This

transmitter must not be co-located or operating in conjunction with any other

antenna or transmitter.

Battery level

0%~33%

33%~66%

66%~100%

Red LED blinks rapidly

Low battery

0%~33%

33%~66%

66%~100%

4 53

Note:

• For devices paired successfully before, the earbuds will auto-connect to device used last time.

• If cannot connect to device used last time in 3 minutes, the earbuds will turn oﬀ automatically.

For more information, please visit our website:

Manual

ISED Regulatory compliance

This device contains licence-exempt transmitters that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).

Operation is subject to the following two conditions:

This device may not cause interference.

This device must accept any interference, including interference that may cause undesired operation of the device.

L’émetteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada

applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :

L’appareil ne doit pas produire de brouillage;

L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.

Cet équipement est conforme aux limites d'exposition aux radiations IC CNR-102 établies pour un environnement non contrôlé.

FCC Regulatory Compliance

Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the

equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Compliance

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

IB-200-000000-14

版面设计：