DreameTech T30 Manuel utilisateur

DreameTech

Cordless Vacuum Cleaner

User Manual

THANK YOU

FOR PURCHASING THIS DREAME

VACUUM CLEANER.

With it you are obtaining a high quality product that is engineered for

optimal performance. If you have any questions on the product, please

contact us: aftersales@dreame.tech.

Registration Quick Start

Welcome to register a Dreame account

by scanning the QR code.

You are available for the User Manual

and Special O󼴨ers.

User Manual

Manuel d'utilisation

Manual de usuario

1

26

53

EN

FR

ES

1

EN

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should always be followed,

including the following:

READ ALL INSTRUCTIONS BEFORE USING (THIS APPLIANCE). Failure to follow the

warnings and instructions may result in electric shock, 󼴩re and/or serious injury.

SAVE THESE INSTRUCTIONS

Household use only.

WARNING – To reduce the risk of 󼴩re, electric shock, or injury:

Safety Information

• Do not use outdoors or on wet surfaces.

• Do not allow to be used as a toy. Close attention is necessary when used by or near

children, pets or plants.

• Use only as described in this manual. Use only manufacturer's recommended attachments.

• Do not use with damaged cord or plug. If appliance is not working as it should, has been

dropped, damaged, left outdoors, or dropped into water, return it to a service center.

• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around

sharp edges or corners. Do not run appliance over cord. Keep cord away from heated

surfaces.

• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

• Do not handle charger, including charger plug, and charger terminals with wet hands.

• Do not put any object into openings. Do not use with any opening blocked; keep free of

dust, lint, hair, and anything that may reduce air flow.

• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving

parts.

• Use extra care when cleaning on stairs.

• Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas

where they may be present.

• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot

ashes.

• Do not use without dust cup and/or filters in place.

• Prevent unintentional starting. Ensure the switch is in the off-position before connecting to

battery pack, picking up or carrying the appliance. Carrying the appliance with your finger

on the switch or energizing appliance that have the switch on invites accidents.

• Disconnect the battery pack from the appliance before making any adjustments, changing

accessories, or storing appliance. Such preventive safety measures reduce the risk of

starting the appliance accidentally.

• Recharge only with the charger specified by the manufacturer. A charger that is suitable for

one type of battery pack may create a risk of fire when used with another battery pack.

2

Direct current

Alternating current~

Caution:

This device complies with Part 15 of the FCC Rules / Innovation, Science and Economic

Development Canada's licence-exempt RSS(s). Operation is subject to the following two

conditions: (1) this device may not cause harmful interference. (2) this device must accept

any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment.This equipment has been tested

and found to comply with the limits for a Class B digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates uses and can radiate

radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one

or more of the following.

EN • Use appliances only with specifically designated battery packs. Use of any other battery

packs may create a risk of injury and fire.

• When battery pack is not in use, keep it away from other metal objects, like paper clips,

coins, keys, nails, screws or other small metal objects, that can make a connection from

one terminal to another. Shorting the battery terminals together may cause burns or a fire.

• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact

accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause irritation or burns.

• Do not use a battery pack or appliance that is damaged or modified. Damaged or modified

batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.

• Do not expose a battery pack or appliance to fire or excessive temperature. Exposure to fire

or temperature above 130°C may cause explosion.

• Follow all charging instructions and do not charge the battery pack or appliance outside

of the temperature range specified in the instructions. Charging improperly or at

temperatures outside of the specified range may damage the battery and increase the risk

of fire.

• Have servicing performed by a qualified repair person using only identical replacement

parts. This will ensure that the safety of the product is maintained.

• Do not modify or attempt to repair the appliance or the battery pack except as indicated in

the instructions for use and care.

• Do not use and store in extremely hot or cold environments (below 0℃/32°F or above

40℃/104°F). Please charge the cordless vacuum in temperature above 0℃/32°F and below

40℃/104°F.

3

Product Overview

Accessories

Note: The images in this manual are for illustrative purposes only. The actual product may differ.

2-in-1 Charging

& Storage Mount

(Including screws ×2,

wall plugs ×2, and

mounting template

sticker )

Smart Multi-Brush BarCharger

LED Crevice NozzleCarbon Fiber Rod

Extension Hose

2-in-1 Brush NozzleFlexible Adapter Mini Electric BrushSoft Dusting Brush

EN

4

Product Overview

Component Names

Display Screen

Antistatic Contact

Carbon Fiber Rod

Release Button

Brushbar Head Release

Button

Carbon Fiber Rod

Smart Multi-Brush Bar

Charging Port

Dust Cup

LED Battery Status Indicator

On/Off Switch

• Press to turn on

• Release to turn off

Battery Release Button

Dust Cup

Bottom Cover Release

Button

EN

5

Product Overview

• The color of dust level indicator changes with the amount of inhaled dust.

• Residual time is for reference only and it may be different from the actual time.

Note:

Switching Suction Level

Press briefly to switch the

suction level

Lock Status

Dust Level Indicator

Suction Level Status

Residual Running-Time

Dust Level Monitoring Curve

The color of curve changes

with the amount of dust in

real time

• Red : High

• Orange : Med

• Green : Low

Electronic Lock/Reset Filter

• Press briefly to enter/exit

lock

• Press and hold for 1.5

seconds to enter the filter

reset interface

Introduction of Display Screen

EN

6

Installation

Vacuum Installation

Diagram

Click

EN

7

Installation

Accessories Installation

Diagram

Click

EN

8

Click Click

Click

Accessories Installation Diagram

Installation

EN

9

2-in-1 Charging & Storage Mount Installation Diagram

(The 2-in-1 charging & storage mount is an optional accessory. You can install it based on

your needs.)

1. The bottom of the mounting template sticker should be level and at least 41" from the

ground, and its top should have at least 12"* of clearance above it.(*12" : Leave enough

space just in case you may need to purchase the replaceable battery in the future.)

2. Use a power drill with an 0.315'' drill bit to drill a hole into each hole marker on the

mounting template sticker, then insert a wall plug into each hole.

3. Align the locating holes on the mount with the holes on the wall. Fasten it to the wall

with the included screws.

Note:

The 2-in-1 charging & storage mount should be installed in a cool, dry place with an

electrical outlet nearby. Prior to installing, ensure that there are no electrical wires or

pipes in the space directly behind where the mount will be installed.

Installation

12"

41''

EN

10

Charging

Note:

Once the vacuum is fully charged, the

indicator will turn off after 5 minutes, and

the vacuum will enter energy-saving mode.

Charging the vacuum with the charger Charging the vacuum on the charging mount

Charging Methods

1

2

LED Battery Status IndicatorDisplay Screen

Battery Status Display

When charging, the indicators blink white.

When the charging is completed, the

indicators keep solid white.

The number on the display screen

represents the current battery level in a

percentage during charging. When the

number becomes 100, the battery is fully

charged.

Fully charge the vacuum before using it for the first time.

• A full charge will take approx. 4 hours.

• Vacuuming in Turbo Mode for a prolonged period will cause the battery to heat up, which

increases charging time. Allow the vacuum to cool down for 30 minutes before charging it.

Note:

EN

11

How to Use

Setting Language

Note: Stop the vacuum at any time while cleaning. It will continue to use the last selected

suction level when starting again.

Switching Suction Level

Press the button to switch between four suction levels of auto, eco, med and turbo. The

corresponding suction level will be highlighted on the display screen.

The color of dust level indicator changes with the amount of inhaled dust. When the

smart multi-brush bar is attached, the vacuum will automatically switch the suction level

between the floor/tile and the carpet.

Press and hold the button for 3 seconds to enter the menu interface. Click the button

to swtich to "Language". Press the button for 1 second to enter the language selection

interface. Click to scroll through the language list, select a language, and then press

and hold for 3 seconds to save your setting.

Cleaning Record

Press and hold the button for 3 seconds to enter the menu interface. Click the button

to swtich to "Cleaning Record" and press the button for 1 second to enter the cleaning

record interface. Then you will see the cleaning record of the last 7 days.

• The display screen will return to the main page if there is no operation for more than 15 seconds.

• To exit the menu interface, click the button to select "Exit".

Note:

EN

12

How to Use

Working Methods

Note:

• In this mode, briefly press the on/off switch to suspend the operation or start again and

the working mode of the vacuum will not change.

• Click the electronic lock again to quit Continuous Cleaning Mode.

Select from two working methods for the vacuum, which can be selected based on your

own needs.

When the vacuum is running, it will monitor the amout of inhaled dust within 1 second. The

amount of dust will be displayed by the color of dust level monitoring curve on the screen

in real time.

Method 1 : Discontinuous Cleaning Mode

Press and hold the switch of the vacuum to enable this mode, and release it to stop

immediately.

Method 2 : Continuous Cleaning Mode (Electronic Lock)

Click the electronic lock key to switch to Continuous Cleaning Mode, and then briefly

press the on/off switch to keep the vacuum in Continuous Cleaning Mode.

Use the electronic lock to free your fingers from fatigue caused by holding the switch.

EN

13

Using Different Accessories

Smart Multi-Brush Bar

For cleaning floors such as marble, tile,

and low pile carpet. When Auto Mode is

activated, the vacuum will automatically

adjust its suction level depending on the

surface type.

Note: The smart multi-brush bar can be

attached directly to the vacuum.

Mini Electric Brush

For vacuuming dirt, pet hair, and other

stubborn debris from sofas, bedding, and

other fabric surfaces.

Note: It is not recommended to vacuum

on fragile surfaces, such as silk.

How to Use

2-in-1 Brush Nozzle Soft Dusting Brush

For vacuuming dust from curtains,

keyboards, ceilings, sofas, vehicle

interiors, coffee tables, etc.

Suitable for vacuuming on LCDs, keyboards,

lampshades, curtains, shutters and other

surfaces of fragile objects.

EN

14

How to Use

Note:

• If any rotating part becomes stuck, the vacuum may shut off automatically. Remove any

trapped objects so the device can function normally.

• When the battery becomes overheated, the vacuum will automatically shut off. Wait until

the battery temperature returns to normal, then the vacuum will work normally.

Extension Hose

It is suitable for vacuuming the corners that are not easily accessible such as drawers, cars

interior, and in the bottom of sofa when used with soft dusting brush or 2-in-1 brush nozzle.

Flexible Adapter LED Crevice Nozzle

Bending and extending the rod with one

click can easily reach under low-lying

furniture, such as bed and sofa.

The nozzle is equipped with a thin suction

opening and LED light. It is suitable for

vacuuming the debris in the narrow places.

EN

15

Care & Maintenance

Tips :

• Always use genuine parts to keep your warranty from becoming void.

• If the filter or nozzle becomes clogged, the vacuum will stop working shortly after

being turned on. To restore normal functions, clean the filter and/or nozzle.

• If the vacuum is not be used for an extended period, fully charge it, unplug its charger,

and store it in a cool, low-humidity environment away from direct sunlight. To avoid

over-discharging the battery, recharge the vacuum at least once every three months.

2. Push the dust cup release switch in the direction indicated by the arrow, then gently

remove the dust cup from the vacuum.

Cleaning the Vacuum

Wipe the vacuum with a soft dry cloth.

Cleaning the Dust Cup, Pre-Filter, and Cyclone Assembly

The vacuum's cleaning ability will be reduced if the dust cup is filled to the "MAX" mark.

To regain performance, empty the dust cup in a timely manner. Before emptying the cup,

make sure the vacuum is disconnected from the power, and do not press its power button.

1. Press the dust cup bottom cover release button, then empty the contents.

2

1

EN

16

Care & Maintenance

3. Remove the pre-filter first, then lift the handle of the cyclone assembly and turn it

counterclockwise until it stops, then pull to lift out the cyclone assembly.

Note: It is recommended to clean the pre-filter at least once every 3 months and the

cyclone system at least once every 6 months.

1

2

3

Pre-filterCyclone Assembly

4. Wipe the dust cup with a soft wet cloth. Pay attention to wring out the discloth before

using.

5. Rinse the cyclone assembly and pre-filter until they are clean. After washing, air dry for

at least 24 hours .

12

6

111

57

210

48

39 24 hrs

To reduce the risk

of electric shock, do

not rinse the dust

cup with water.

EN

17

Installing the Dust Cup, Pre-Filter, and Cyclone Assembly

1. Insert the cyclone assembly vertically into the dust cup, and make sure that the handle

of the cyclone assembly line up with the slot on the left side of the dust cup. Turn the

handle clockwise until it locks, then flip the handle down.

2. Place the pre-filter with its front side facing up into the cyclone assembly.

3. Slightly tilt the dust cup so its slot aligns with the clip on the vacuum. Then gently push

the dust cup until it clicks into place.

3

1

2

3

Care & Maintenance EN

La page charge ...

DreameTech T30 Manuel utilisateur

DreameTech T30 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents