PEERLESS-AV UV492 Manuel utilisateur

12017-02-17 #:180-9099-1

ULTRAVIEW™ UHD OUTDOOR TELEVISION

MODEL:

UV492, UV552, UV652

User Guide

www.peerless-av.com

22017-02-17 #:180-9099-1

System Installation And Electrical Requirements ..................................................................................3

Electrical Code ...............................................................................................................................3

Power Source ................................................................................................................................3

General Safety Precautions ...................................................................................................................4

FCC Caution ...................................................................................................................................6

FCC Statement ...............................................................................................................................6

Relevant Information .....................................................................................................................6

Set Up Instructions .................................................................................................................................7

Parts List ........................................................................................................................................7

Choose your TV Location ...............................................................................................................8

Removing Cord Cover ....................................................................................................................8

Connecting Cables .........................................................................................................................8

Replacing Cord Cover ...................................................................................................................9

Connecting To The Power Source ................................................................................................10

Prepare Your TV For Mounting .....................................................................................................11

Prepare The TV For Usage ..........................................................................................................12

Remote Control Battery Installation And Replacement ................................................................12

Operating Instructions ..........................................................................................................................13

Power On/Off the TV ....................................................................................................................13

Onboard Controls .........................................................................................................................13

Navigating The On-Screen Menu ................................................................................................14

Picture .................................................................................................................................14

Audio ...................................................................................................................................14

Closed Caption ....................................................................................................................14

Setup ...................................................................................................................................14

Time ....................................................................................................................................15

Lock .....................................................................................................................................15

CEC .....................................................................................................................................15

Channel ...............................................................................................................................15

PC ........................................................................................................................................15

USB Functionality ................................................................................................................16

IR Extender .........................................................................................................................17

(RS-232C) Serial Control Of The TV ...........................................................................................18

Maintenance ........................................................................................................................................19

Care Of Screen ...........................................................................................................................19

Mobile Telephone Caution ...........................................................................................................19

End Of Life Directives ..................................................................................................................19

Product Speciﬁ cations .........................................................................................................................20

Display ..........................................................................................................................................20

Power ..........................................................................................................................................20

TV Controller Features ................................................................................................................20

Environmental .............................................................................................................................20

Mechanical ..................................................................................................................................21

Input/Output Connections ............................................................................................................21

Warranty ..............................................................................................................................................23

CONTENTS

32017-02-17 #:180-9099-1

SYSTEM INSTALLATION AND ELECTRICAL REQUIREMENTS

Electrical Code

Note: To the display system installer: This reminder is provided to call attention to Article 820-44 of

the National Electric Code that provides guidelines for proper grounding and, in particular, speciﬁ es

that the cable ground shall be connected to the grounding system of the facility. Outlet shall be

installed near the equipment and shall be easily accessible.

Note: Installation shall incorporate UL Listed external surge protection rated 2500 Vpk or less, for 150

to 300 Vac mains, installed in accordance with Article 285 of ANSI/NFPA 70 or applicable local codes.

Power Source

The TV must be connected to a mains socket outlet with a protective grounding connection.

The mains plug is used as the disconnect device and shall remain readily accessible.

This display operates on 100-240 volts 50-60 Hz, AC current. Insert the power cord into a 120 volt

60 Hz outlet. Never connect the TV to direct current or anything other than the speciﬁ ed voltage.

To prevent electric shock from the TV, do not use with an extension cord, receptacle, or other outlet

unless the blades and ground terminal can be fully inserted to prevent blade exposure.

Antenna discharge unit

(NEC Section 810-20)

NEC National Electric Code

Ground clamp

Electric service

equipment

Ground clamps Power service grounding

electrode system

(NEC Art 250 Part H)

Grounding conductors

(NEC Section 810-21)

Antenna lead-in wire

• Never remove the back cover of the TV as

this can expose you to very high voltages

and other hazards. If the TV does not

operate properly, unplug the TV and call

your authorized dealer or service center.

WARNING

42017-02-17 #:180-9099-1

Read before operating equipment

Thank you for purchasing our product. Before using it, please read this user manual carefully

and follow the instructions correctly for safe operation. Please keep this manual handy for future

reference. Also, please be sure to always include this user manual in the packaging when transferring

or transporting this product to a different location.

Batteries Installed Warning

CAUTION - Danger of explosion if batteries are incorrectly replaced. Replace only with the same or

equivalent type. Even though the remote is designed for outdoor usage, the batteries should not be

exposed to excessive heat due to sunlight, ﬁ re or other heat sources.

CAUTION:

To reduce the risk of electric shock, do not perform any servicing other than that contained in the

operating instructions unless you are qualiﬁ ed to do so.

• Read these instructions.

• Keep these instructions.

• Heed all warnings.

• Follow all instructions.

• Do not defeat the safety purpose of the polarized or grounding type electrical plug. A polarized

plug has two blades with one wider than the other. A grounding type plug has two blades and

a third grounding prong. The wide blade or the third prong are provided for your safety. If the

provided plug does not ﬁ t into your outlet, consult an electrician for replacement of the obsolete

outlet.

• Protect the electrical cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

• Refer all servicing to qualiﬁ ed service personnel. Servicing is required when the apparatus has

been damaged in any way, such as electrical-supply cord or plug is damaged, does not operate

normally, or has been dropped.

• Only use attachments/accessories speciﬁ ed by the manufacturer.

• In case of emergency such as ﬁ re or electric shock caused by the product, immediately contact

911 or proper emergency police/ﬁ re service agencies in your country.

• If monitor or glass is broken, do not come in contact with the liquid crystal and handle with care.

• Follow instructions for wall, shelf or ceiling mounting as recommended by the manufacturer.

• An outdoor antenna should not be located near overhead electrical lines or any electrical circuits.

• If an outside antenna is connected to the receiver, conﬁ rm that the antenna system is grounded

to protect against voltage surges and built up static charges. Section 810 of the National Electric

Code, ANSI/NFPA No 70-1984, provides information with respect to proper grounding for the

mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of

grounding connectors, location of antenna discharge unit, connection to grounding electrodes and

requirements for the grounding electrode.

• Use properly rated electrical voltage. Use of non-rated voltage may cause ﬁ re, electric shock and

severe damages to the product.

• Do not open the cabinet under any circumstances. High voltage inside of this product may cause

electric shock.

• Do NOT climb on the product.

GENERAL SAFETY PRECAUTIONS

RISK OF ELECTRICAL SHOCK

To reduce the risk of electric shock, do not disassemble the unit under any circumstances. No

user serviceable parts inside. All product services should be done by the Peerless-AV certiﬁ ed

service personnel.

WARNING

52017-02-17 #:180-9099-1

• Do NOT, under any circumstances, modify or disassemble this product as it may cause ﬁ re,

electric shock, or severe damages to the product. Also, any unauthorized modiﬁ cations made to

the product automatically void product warranty.

• Never touch antenna lines or wires, electrical cables or plugs when lightning or thunder is present

as it may cause electric shock.

• Any severe physical impact on the product may cause certain components to fall out of place

within and break, which may cause ﬁ re or electric shock. In such event, do not operate the

product. Contact the manufacturer for support.

• Periodically clean dust off the electrical plug to keep it clean and dry, ensuring proper and safe

operation of the product.

• Do NOT destroy, process, or place close to any heat source; do NOT bend or twist electrical

cords, electrical plugs, cables, or wires with excessive force; do NOT place any heavy object on

the TV as all of the above may cause damage resulting in ﬁ re or electric shock.

• Do NOT touch electrical plugs with wet hands.

• Always make sure to plug in the electrical plug ﬁ rmly and completely. Incompletely placed

electrical plugs may cause ﬁ re or electric shock due to built up heat emission.

• Do NOT use any non-rated electrical sockets or power strips with many other devices jointly

plugged in. The wire of non-designated capacity may cause ﬁ re due to built up heat emission.

Try to use a single, directly dedicated and rated GFCI electrical outlet for the product for safe

operation.

• In case of product malfunction or unusual events such as electrical burning smell, smoke, or loss

of content signals on TV due to internal overheating, immediately turn off and unplug the electrical

cord and contact the manufacturer.

• Do NOT install the product in unstable locations or near moving objects, constantly vibrating

equipment, or uneven surfaces. Follow mounting instructions properly for safe operation of the

product as improper installation may cause products to fall.

• Do NOT install the product near any poisonous gas or chemically unstable atmosphere as it may

cause ﬁ re.

• Do NOT submerge TV in water.

• Do NOT pressure wash TV. Although the IP55 rating protects against jets of water, high pressure

force may compromise the TV.

• Do NOT install the product near any strong magnetic or electrical current ﬁ eld as it may cause

ﬁ re, electric shock, or severe damages to the product and the product may be subject to

electromagnetic radiation, causing deterioration of the picture quality.

• Do NOT leave any ﬁ re source, such as candles, close to or on the product as it may be a cause

for ﬁ re or damages to the product.

• Do NOT move or transport the product with any cables (electrical cables, content connectivity

cables) plugged in to the source devices. Damages may occur to the cables, plugs, or jointing

connectors of the cables due to forcible bending and stress, which may cause damages to the

waterproof seal of the product, making it subject to ﬁ re, electric shock, or shorted circuit.

• When unplugging the electrical plug or other cables, always pull using the plug and not the cord.

Improper pulling of the cords or cables may cause damage to the waterproof seal, making it

subject to ﬁ re, electric shock, or a shorted circuit.

• Outdoor TVs should always be carried and supported by at least two persons.

• Do NOT use any other electrical cords or connection cables than what is provided with the

product or from the manufacturer directly. Use of untested, unauthorized, or substituted electrical

cords or connection cables may cause malfunction, ﬁ re, electric shock, or severe damages to the

product. Also, such use of improper or undesignated electrical cords or connection cables will void

product warranty.

• Always leave the Power Off when plugging or unplugging the electrical cords or connection cables

to avoid electric shock or damages to the product.

• Do NOT use any chemical such as paint thinner or benzene to clean the product’s exterior. It may

cause scratches on the surface, erasing proper indications, identiﬁ cation labels, or instructions on

the exterior, which may cause misuse and improper operation of the product.

62017-02-17 #:180-9099-1

FCC CAUTION

To assure continued compliance and possible undesirable interference, ferrite cores may be used

when connecting this TV to video equipment; maintain at least 400mm (15.75 inches) spacing to

other peripheral devices.

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rule. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with these instructions,

may cause harmful interference to radio communications; however, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

4. Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

• This device may not cause harmful interference.

• This device must accept any interference received, including interference that may cause

undesired operation.

Relevant Information

Record your TV's model and serial number here for future reference. Keep this user manual in an

accessible location in the event service is required.

Note: Your TV's serial number can be found on the box and underneath the rear cover plate.

Model Number ____________________________________

Serial Number ____________________________________

• Please use the electrical cord provided with this display. If a electrical cord is not supplied

with this equipment, please contact your supplier. Only plug equipment into receptacles with

GFCI protection.

• Peerless-AV is not responsible for any issues created by water present at the plug/receptacle

insertion point.

CAUTION

72017-02-17 #:180-9099-1

SET UP INSTRUCTIONS

Parts List

Description Qty

Atelevision 1

Bcord cover plate (preinstalled) 1

Cremote 1

Dthumb screw (preinstalled) 4

Edisplay dust cover 1

FIR extender 1

Guser guide 1

C (1)

A (1)

E (1)

B (1)

D (4)

remote

F (1)

IR extender

television

display dust

cover

cord cover

plate

thumb screw

AUX

LAST

OK

INFO

+

EXIT

CBLDVD

MUTE

POWER

VCR SAT

SOURCE

TV

1

4

7

.

2

5

8

0

3

6

9

VOL

REW PLAY FF MENU

REC STOP PAUSE GUIDE

CH

• Never apply pressure to the exterior of the LCD screen. The manufacturer's warranty does not

cover user abuse or improper installations

• All cables and cable covers MUST be connected and attached prior to installation on mount.

• When routing cables through the cable entry, make sure that the cables are formed in such a

way as to remove any stress on the connectors.

• Electrical installation shall be in accordance with the applicable parts of Chapter 8 of ANSI/

NFPA70.

CAUTION

82017-02-17 #:180-9099-1

Connecting Cables

Removing Cord Cover

Connect cables from the source devices to their appropriate connector on the display. The USB 2.0

Data port is for service and media only. For 5VDC power, use the 5VDC power port.

Remove (4) thumb screws (D) and cord cover (B) to access source connection panel. Do not

disconnect lanyard.

A

B

D (4)

Choose your TV location

The operating temperature range of the TV is -22° to 122° F (-30° to 50° C). Do NOT use the TV if

ambient air temperature exceeds the operating temperature limits.

Do not install within 5 ft. from a body of water.

CAUTION

RS-232C

Audio Out

USB 2.0 Data

DisplayPort

HDMI 1 (ARC)

HDMI 2

HDMI 3 (MHL)

VGA

Audio In

S/PDIF Optical

IR Extender

Mini Component

Mini AV

Antenna or Cable

12VDC 2.5A USB 5VDC 2.4A

4

USB 2.0

Data

92017-02-17 #:180-9099-1

Replacing Cord Cover

1. Run cables across foam gasket block. Leave approximately 1/2" (13mm) between cables to

ensure a proper seal.

2. Replace cord cover (B) and (4) thumb screws (D). Fasten thumb screws until gasket on cord

cover plate is fully compressed to back of television. Cables will seal between display's gasket

and cord cover's gasket as cover is pressed into place. Route cables through opening at end of

cord cover.

B

D (4)

• Ensure bend radius limits for cables do not

exceed limits set by the manufacturer.

• Ensure cables are seated properly in the

cable gland to avoid potential damage to

cables when cord cover is installed.

• Do not remove lanyard that connects the

cord cover to the display.

CAUTION

Do not overtighten screws

10 2017-02-17 #:180-9099-1

Connect To The Power Source

Connect power cord to GFCI outlet.

11 2017-02-17 #:180-9099-1

Prepare Your TV For Mounting

Note: Install cables prior to mounting your display. Cable entry cover may be obstructed once the

display is mounted.

A mounting solution is not included and is sold separately. Contact your Peerless-AV representative

for an outdoor rated mounting solution for your particular application.

For your safety, only install an outdoor-rated mount that is suitable for the application and supports

the weight of the display. When mounting a display outdoors, use proper environmentally rated

mounts to ensure longevity in harsh environments.

Examine the chart below to determine the mounting speciﬁ cations for your TV:

BF

D

Model Mounting Hole

Pattern Required Mounting

Screws

UV492 400x200mm (4) M8 screws

(17.4mm long)

UV552 400x300mm (4) M8 screws

(17.4mm long)

UV652 400x400mm (4) M8 screws

(17.4mm long)

Model A B C D E F G H

UV492 15.75"

(400mm) 7.87"

(200mm) 14.69"

(373mm) 8.38"

(213mm) 45.13"

(1146mm) 26.64"

(677mm) 3.34"

(85mm) .61"

(16mm)

UV552 15.75"

(400mm) 11.81"

(300mm) 17.37"

(441mm) 7.93"

(201mm) 50.50"

(1283mm) 29.66"

(753mm) 3.34"

(85mm) .61"

(16mm)

UV652 15.75"

(400mm) 15.75"

(400mm) 21.69"

(551mm) 8.39"

(213mm) 59.00"

(1501mm) 34.53"

(877mm) 3.39"

(86mm) .61"

(16mm)

REAR VIEW SIDE VIEW

A

E H

C G

12 2017-02-17 #:180-9099-1

The remote control is powered by two 1.5V AAA

batteries installed at the factory.

To install or replace batteries:

1. To remove the battery module of the remote

control, remove the two screws on the end of

the battery module. Slide the battery module

out of the remote control.

2. Insert two new “AAA” size batteries into the

battery module.

3. Slide the battery module back into the remote

control and reinsert the two screws in the end

of the battery module.

Incorrect usage of batteries can result in leaks

or bursting. Peerless-AV recommends the

following battery use:

• Do not mix battery brands.

• Do not combine new and old batteries. This

can shorten the battery life or cause liquid

leakage of the batteries.

• Remove dead batteries immediately to

prevent battery acid from leaking into the

battery compartment.

• Do not touch exposed battery acid as it

may injure skin.

• Remove the batteries if you do not intend

to use the remote control for a long period

of time.

CAUTION

Prepare The TV For Usage

1. Clean the TV with an approved screen cleaner and microﬁ ber cloth designated in the "Care of the

Screen" section. Do not use window cleaners or products containing ammonia.

Remote Control Battery Installation And Replacement

C

AUX

LAST

OK

INFO

+

EXIT

CBLDVD

MUTE

POWER

VCR SAT

SOURCE

TV

1

4

7

.

2

5

8

0

3

6

9

VOL

REW PLAY FF MENU

REC STOP PAUSE GUIDE

CH

AUX

LAST

OK

INFO

+

EXIT

CBLDVD

MUTE

POWER

VCR SAT

SOURCE

TV

1

4

7

.

2

5

8

0

3

6

9

VOL

REW PLAY FF MENU

REC STOP PAUSE GUIDE

CH

13 2017-02-17 #:180-9099-1

Power On/Off Your New TV

Power on your TV by using the remote control or the rear power button on the side of the TV. The TV

will power on but image may not appear for a few seconds as it completes its power up sequence.

Remote control

Point the remote control at the IR sensor located

behind the Peerless-AV logo at the center of the

TV and press the power button

OPERATING INSTRUCTIONS

Onboard Controls

Direct Mode: Allows for quick access to source selection, volume settings and channel selection.

Menu Mode: Press the Menu button to access Menu Mode and activate the On Screen Display

(OSD). For a description of OSD operation refer to the next section.

The keypad buttons are assigned as indicated in the table below.

Menu Mode Direct Mode

On/Off On/Off

OK Input Select

Menu Menu

Up Channel Up

Down Channel Down

Right Volume Up

Left Volume Down

AUX

LAST

O

CBLDVD

MUTE

POWER

VCR SAT

SOURCE

TV

1

4

7

.

2

5

8

0

3

6

9

14 2017-02-17 #:180-9099-1

Picture

Picture Mode Standard

Dynamic

Theater

Personal

Contrast 50

Brightness 50

Color 50

Tint 50

Sharpness 50

Color Temp. Normal

Cool

Warm

Zoom Mode 16:9

Full

Zoom

4:3

3DNR Off

Weak

Middle

Strong

Backlight - / +

DLC (Dynamic

Backlight) On / Off

Color Range Auto, 0 - 255, 16 - 234

Closed Caption

CC Mode CC Off / CC On /

CC On Mute

Analog CC CC1 / CC2 / CC3 / CC4

/ Text 1 / Text 2 / Text 3 /

Text 4

Digital CC Off / Service 1 / Service

2 / Service 3 / Service 4 /

Service 5 / Service 6

Option press button to enter

Mode Default / Custom

Audio

Equalizer Standard

Music

Movie

Sport

Personal

120 Hz 50

500 Hz 50

1.5 kHz 50

5 kHz 50

10 kHz 50

Audio Language English

Spanish

French

Digital Output

(Optical) PCM / Raw

Surround On / Off

AVC On / Off

Navigating The On Screen Menu

Pressing the menu key on the remote or the onboard controls will cause the On Screen Display

(OSD) main page to be displayed with six menu tabs: Picture, Audio, Time, Setup, Lock and Channel.

Use the cursor keys to move through the various sub menus. Pressing the menu key again will move

the selection back one level. Press exit to quit.

Setup

Menu

Languages English

Spanish

French

Transparency

(Menu

Transparency)

0%

25%

50%

75%

100%

OSD Time Out 5, 15, 30, 45, 60 seconds

Restore Defaults Factory Reset All Options

Setup Wizard

Software Update (USB)

Blue Screen On / Off

HDMI MODE Video

Graphic

EDID Switch 1.4, 2.0

15 2017-02-17 #:180-9099-1

CEC

CEC On / Off

Device Auto

Power Off On / Off

TV Auto

Power On On / Off

Auto Receiver On / Off

Navigating The On Screen Menu

Pressing the menu key on the remote or the onboard controls will cause the On Screen Display

(OSD) main page to be displayed with six menu tabs: Picture, Audio, Time, Setup, Lock and Channel.

Use the cursor keys to move through the various sub menus. Pressing the menu key again will move

the selection back one level. Press exit to quit.

Time

Sleep Timer off

5min

10min

15min

30min

60min

90min

120min

180min

240min

Time Zone Select time zone

DST On / Off

Time Format 12-hour

24-hour

Auto Sync On / Off

Clock Enter Current Time

Wake Up Enter desired time when

display will turn on

Lock

System Lock Enter Password to lock

the menu

Input Block Allows inputs to be

blocked

TV Rating Allows programming to be

blocked based on MPAA

rating

Channel

Air / Cable Choose between Antenna

and Cable

Auto Scan Searches for available

channels

Favorite Shows favorite channels

Show/Hide Show or hide channels

Channel No. Displays list of channels

Channel Label Change channel names

DTV Signal Displays channel info and

signal strength

PC

H-Pos - / +

V-Pos - / +

Clock - / +

Phase - / +

Auto Selects optimal position of

the picture

16 2017-02-17 #:180-9099-1

USB Functionality

The USB input can be used to access media stored on a USB ﬂ ash drive. The TV can support MP3,

WAV, JPEG, BMP and TXT ﬁ le types.

To access media stored on a USB ﬂ ash drive insert the drive into the USB port on the rear of the

TV. Press the source button on the remote control and select USB from the input menu. Select the

type of media that you are trying to access from the USB menu and press, enter. If the ﬁ les that you

are trying to access are on the root of the USB drive, they will be displayed on the TV. If the ﬁ les are

stored in a folder on the USB drive, navigate to the folder where the desired ﬁ les are stored, using the

arrow keys and enter button on the remote.

Music – To listen to music from a USB ﬂ ash drive

select music from the main USB menu. Use the

arrow keys to highlight the desired song and

press enter to select it. Selected audio ﬁ les will

display a check mark underneath them. Once

all of the desired music has been selected press

play/pause to listen to the selected songs. If

multiple ﬁ les have been selected a playlist will be

created. When the audio ﬁ rst begins to play there

will be a menu bar at the bottom of the screen,

use the arrows keys and enter to select the

desired audio preferences. Pressing the down

arrow on the remote will hide the menu bar.

Text – To display a text ﬁ le from a USB ﬂ ash

drive select text from the main USB menu. Use

the arrow keys to highlight the desired text ﬁ le

and press enter to select it. Once all of the

desired text ﬁ les have been selected press play/

pause to view the text. If multiple ﬁ les have been

selected a playlist will be created. When the

text is ﬁ rst displayed on the screen a menu will

appear at the bottom of the screen, use the arrow

keys and enter to select the desired text settings.

Pressing the down arrow will hide the menu bar.

17 2017-02-17 #:180-9099-1

USB Functionality

IR Extender

To utilize the IR extender feature, insert the 3.5mm end of the included IR extender into the IR

Extender port on the input panel of the display. Connecting the IR extender will disable the IR window

on the front of the TV. Included with the TV is a 5V IR extender, the IR extender port may not be

compatible with other 3rd party extenders.

Photos – To view photos from a USB ﬂ ash drive

select photos from the main USB menu. Use

the arrow keys to highlight the desired photo

and press enter to select it. Selected photos will

display a check mark underneath them. Once all

of the desired photos have been selected press

the play/pause button on the remote to display

them on the TV. If multiple photos have been

selected, they will be displayed as a slide show.

When the photos are ﬁ rst displayed there will be

a menu bar at the bottom of the screen, use the

arrow keys and enter to select the desired photo

preferences. Pressing the down arrow on the

remote will hide the menu bar.

18 2017-02-17 #:180-9099-1

(RS-232C) Serial Control Of The TV

Attach an RS-232C cable (straight through type) to the supplied D-Sub RS-232C for the connections.

Note: This operation system should be used by a person who is accustomed to using computers.

Menu:

Right:

OK:

Down:

Up:

Left:

Source:

(1):

(2):

(3):

(4):

(5):

(6):

(7):

(8):

(9):

(0):

Exit:

Power On:

Power Off:

Power On/Off:

Volume +:

Volume -:

Channel +:

Channel -:

Mute:

Sleep:

AV:

VGA:

HDMI Toggle:

HDMI1:

HDMI2:

HDMI3:

DisplayPort:

TV:

DTV:

Component:

USB:

PMODE:

Zoom:

Surround:

SMODE:

VOL 25%:

VOL 50%:

VOL 75%:

VOL 100%:

Brightness 25%:

Brightness 50%:

Brightness 75%:

Brightness 100%:

A0, F0, 55, FF, 4E, B1

A0, F0, 55, FF, 05, FA

A0, F0, 55, FF, 02, FD

A0, F0, 55, FF, 0D, F2

A0, F0, 55, FF, 17, E8

A0, F0, 55, FF, 0C, F3

A0, F0, 55, FF, 01, FE

A0, F0, 55, FF, 42, BD

A0, F0, 55, FF, 43, BC

A0, F0, 55, FF, 0F, F0

A0, F0, 55, FF, 1E, E1

A0, F0, 55, FF, 1D, E2

A0, F0, 55, FF, 1C, E3

A0, F0, 55, FF, 18, E7

A0, F0, 55, FF, 45, BA

A0, F0, 55, FF, 4C, B3

A0, F0, 55, FF, 56, A9

A0, F0, 55, FF, 1B, E4

A0, F0, 55, FF, AE, 51

A0, F0, 55, FF, AD, 52

A0, F0, 55, FF, 0B, F4

A0, F0, 55, FF, 0A, F5

A0, F0, 55, FF, 40, BF

A0, F0, 55, FF, 55, AA

A0, F0, 55, FF, 5A, A5

A0, F0, 55, FF, 14, EB

A0, F0, 55, FF, 53, AC

A0, F0, 55, FF, ED, 12

A0, F0, 55, FF, EA, 15

A0, F0, 55, FF, EC, 13

A0, F0, 55, FF, DE, 21

A0, F0, 55, FF, DF, 20

A0, F0, 55, FF, E0, 1F

A0, F0, 55, FF, E4, 1B

A0, F0, 55, FF, E8, 17

A0, F0, 55, FF, E9, 16

A0, F0, 55, FF, E7, 18

A0, F0, 55, FF, 57, A8

A0, F0, 55, FF, 4B, B4

A0, F0, 55, FF, 51, AE

A0, F0, 55, FF, C7, 38

A0, F0, 55, FF, 5B, A4

A0, F0, 55, FF, 21, DE

A0, F0, 55, FF, 22, DD

A0, F0, 55, FF, 23, DC

A0, F0, 55, FF, 24, DB

A0, F0, 55, FF, 26, D9

A0, F0, 55, FF, 27, D8

A0, F0, 55, FF, 28, D7

A0, F0, 55, FF, 29, D6

COM Settings

Baud Rate 38400

Data Bits 8

Parity None

Stop Bits 1

19 2017-02-17 #:180-9099-1

Care Of The Screen

Do not rub or strike the screen with anything hard as this may scratch, mark, or even damage the

screen permanently. Ensure that the TV is installed in a location where it will be safe from abrasives

and ﬂ ying debris, which could damage the LCD panel. Never pressure wash the TV. Doing so may

result in permanent damage to the TV. Never use ammonia or any product containing ammonia, as

it will damage the anti-glare coating on the face of the TV. Only use an approved screen cleaner to

clean the display face. Unplug the power cord before cleaning the screen. Dust the display by wiping

the screen and the cabinet with a soft, clean cloth. If the screen requires additional cleaning, use a

clean, damp cloth. Do not use liquid cleaners, aerosol cleaners, or solvents of any kind. To prolong

the life of the TV, install the dust cover when the TV is not is use.

Mobile Telephone Caution

Keep your mobile telephone away from your display to avoid disturbances in the picture or sound,

possibly causing permanent damage to your TV.

End Of Life Directives

In an effort to produce environmentally friendly products, your new TV contains materials that can

be recycled and reused. At the end of your TV life, specialized companies can minimize TV waste by

separating reusable materials from non-reusable materials. Please ensure you dispose of your TV

according to local regulations.

MAINTENANCE

20 2017-02-17 #:180-9099-1

Speciﬁ cations subject to change without notice

PRODUCT SPECIFICATIONS

Display

Screen Size UV492: 49" diagonal

UV552: 55" diagonal

UV652: 65" diagonal

Aspect Ratio 16:9

Resolution 3840 x 2160

Brightness 500 cd/m2

Contrast Ratio 1100:1

Viewing Angle 178° vertical / horizontal

Response Time

(gray to gray) 8ms

Refresh Rate 60 Hz

TV Controller Features

Analog TV NTSC

Digital TV ATSC / QAM 256

Picture

Adjustment Brightness / Contrast /

Tint / Sharpness / Noise

Reduction / Color

Picture Mode Standard, Dynamic,

Theater, Personal

Color

Temperature

Adjustment

Cool, Normal, Warm

Screen

Adjustment 16:9 / Full / Zoom / 4:3

Clock, Sleep

Timer Yes

MTS Yes

V-chip Yes

Closed Caption Yes

Electronic

Program Guide Yes

Noise Reduction Yes

3-D Comb Filter

and De-interlace Yes

Mute Yes

OSD Language English, French, Spanish

Power

AC Input 100 VAC to 240 VAC,

50 to 60 Hz

Environmental

Operating

Temperature -22° F to 122° F

(-30° C to 50° C)

Storage

Temperature -4° F to 140° F

(-20° C to 60° C)

IP Rating IP55

Safety/EMC FCC Class B

La page est en cours de chargement...

PEERLESS-AV UV492 Manuel utilisateur

PEERLESS-AV UV492 Manuel utilisateur

dans d''autres langues

Autres documents