14
DO607ED
FR
MODE
Le bouton MODE vous permet de choisir parmi trois zones
de chaleur :
1. Le corps
2. Les pieds
3. Le corps & les pieds
Les pieds sont éloignés du cœur, ils sont donc souvent froids. La partie de la couverture
électrique réservée aux pieds est toujours plus chaude de 5 °C que la partie réservée au corps.
TEMP
Le bouton TEMP vous permet de régler la température. Vous avez le choix parmi huit
températures programmées comprises entre 20 °C et 50 °C.
· Appuyez sur le bouton TEMP. L’achage de la température commence à clignoter à
l’écran.
· Appuyez sur + ou sur - pour augmenter ou diminuer la température.
New blenket item develop plan
3 page of 4 pages
5. Function and operation
5.1 Turn on :
Press ON/OFF button to turn on machine,machine will open LCD backlight,and LCD display all
icon 1 S, then into "Body and feet heating mode".
5
.2 Select mode :
During "Body and feet mode", use "Mode" button to select three mode:"Body mode", "Feet mode" and
"Body and feet mode"
5
.3 Select setting:
press "TEMP" "5" setting blink
In any turn on condition, press【TEMP】Button,the temperature icon will blink,then
press【+】button,heating setting will increase, the highest is 8; press【-】button
will decline Temperature setting until reach 0, 0 setting does't heating , LCD
display "Stand BY".
Body mode
Feet mode
Body and feet mode
press "+" incease settings
press "-"
decline settings
New blenket item develop plan
3 page of 4 pages
5. Function and operation
5.1 Turn on :
Press ON/OFF button to turn on machine,machine will open LCD backlight,and LCD display all
icon 1 S, then into "Body and feet heating mode".
5
.2 Select mode :
During "Body and feet mode", use "Mode" button to select three mode:"Body mode", "Feet mode" and
"Body and feet mode"
5
.3 Select setting:
press "TEMP" "5" setting blink
In any turn on condition, press【TEMP】Button,the temperature icon will blink,then
press【+】button,heating setting will increase, the highest is 8; press【-】button
will decline Temperature setting until reach 0, 0 setting does't heating , LCD
display "Stand BY".
Body mode
Feet mode
Body and feet mode
press "+" incease settings
press "-"
decline settings
New blenket item develop plan
- - 42 page of 4 pages
3. Control panel looks
4. Switch and button define and function
【ON/OFF】Button:For comply energe standard, use mechanical switch.Turn off machine, the ratting is 0
W,turn on machine then LCD display all icon 1 s, CUP check itselft.If all fuction is ok,machine will automatic
work with 5 heating setting and fixed time 8 hours
【MODE】Button:Set function mode-body heatingn mode;feet heating mode,body and feet mode
【QUICK】Button:Press it into quick heating function, machine will work with 8 heating setting and
30 minutes and then automaticly back to the initail setting
【TEMP】Button: press it then press 【+】and【-】could set heatting setting.
【TIMER】Button: press it then press【+】and【-】set heating setting
【+】Button: press it to increase temperature.
【-】Button: press it to decline time
· Attendez quelques instants et la température sélectionnée clignote. La couverture
commence à chauer pour nalement atteindre cette température.
· Si le réglage de la température est positionné sur « 0 », la couverture ne chaue pas.
QUICK
En appuyant sur le bouton QUICK, vous activez la position de chaleur la plus
élevée (position 8) pendant 30 minutes. Une fois que la couverture est en mode
« marche », vous pouvez appuyer sur ce bouton à n’importe quel moment. Le
MODE sélectionné ne change pas. Au terme des 30 minutes, le réglage initial
se reprogramme automatiquement.
MINUTERIE
Lorsque le mode minuterie n’est pas activé, la couverture continue de chauer jusqu’au
moment où vous l’éteignez. Grâce au bouton MINUTERIE, vous pouvez programmer
une durée maximale de 12 heures. Une fois ce temps écoulé, la couverture s’éteint
automatiquement.
· Appuyez sur le bouton MINUTERIE. Les minutes commencent à clignoter à l’écran.
Appuyez sur + ou sur - pour programmer le nombre de minutes. Attendez quelques
instants et la durée que vous avez sélectionnée clignote.
· Si vous maintenez le bouton + enfoncé, vous faites également déler les heures. Vous
pouvez toutefois programmer les heures séparément. Appuyez de nouveau sur le bouton
MINUTERIE. Les heures commencent à clignoter à l’écran. Appuyez sur + ou sur - pour
New blenket item develop plan
4 page of 4 pages
5.4 Selection time
In any turn on condition, press【TIMER】button,the time icon will blink(fist set hour,then
set minute)then press【+】button,increase time until the longest time-12 hours;
press【-】button, time will decline until 0 minute. 0 minute mean machine is non-fixed time
Press "TIMER" time icon blink
press "+"increase time
press “ - " decline time
5.5 Quick heating function
In any turn on condition,press【QUICK】button,machine into "quick heating mode" works
with 8 heating setting and 30 minutes, in time will back to initial setting.
5.6 In any turn on condition,when key part is broken, CPU will exzmine the reason,the machine
display error info on LCD and open backlight, meantime all button are no function.Thyristor close
output(Switch short circuit will output) blanket off power.
New blenket item develop plan
3 page of 4 pages
5. Function and operation
5.1 Turn on :
Press ON/OFF button to turn on machine,machine will open LCD backlight,and LCD display all
icon 1 S, then into "Body and feet heating mode".
5
.2 Select mode :
During "Body and feet mode", use "Mode" button to select three mode:"Body mode", "Feet mode" and
"Body and feet mode"
5
.3 Select setting:
press "TEMP" "5" setting blink
In any turn on condition, press【TEMP】Button,the temperature icon will blink,then
press【+】button,heating setting will increase, the highest is 8; press【-】button
will decline Temperature setting until reach 0, 0 setting does't heating , LCD
display "Stand BY".
Body mode
Feet mode
Body and feet mode
press "+" incease settings
press "-"
decline settings
New blenket item develop plan
3 page of 4 pages
5. Function and operation
5.1 Turn on :
Press ON/OFF button to turn on machine,machine will open LCD backlight,and LCD display all
icon 1 S, then into "Body and feet heating mode".
5
.2 Select mode :
During "Body and feet mode", use "Mode" button to select three mode:"Body mode", "Feet mode" and
"Body and feet mode"
5
.3 Select setting:
press "TEMP" "5" setting blink
In any turn on condition, press【TEMP】Button,the temperature icon will blink,then
press【+】button,heating setting will increase, the highest is 8; press【-】button
will decline Temperature setting until reach 0, 0 setting does't heating , LCD
display "Stand BY".
Body mode
Feet mode
Body and feet mode
press "+" incease settings
press "-"
decline settings
New blenket item develop plan
3 page of 4 pages
5. Function and operation
5.1 Turn on :
Press ON/OFF button to turn on machine,machine will open LCD backlight,and LCD display all
icon 1 S, then into "Body and feet heating mode".
5
.2 Select mode :
During "Body and feet mode", use "Mode" button to select three mode:"Body mode", "Feet mode" and
"Body and feet mode"
5
.3 Select setting:
press "TEMP" "5" setting blink
In any turn on condition, press【TEMP】Button,the temperature icon will blink,then
press【+】button,heating setting will increase, the highest is 8; press【-】button
will decline Temperature setting until reach 0, 0 setting does't heating , LCD
display "Stand BY".
Body mode
Feet mode
Body and feet mode
press "+" incease settings
press "-"
decline settings
1 2 3