Vermeiren EXPRESS Manuel utilisateur

VERMEIREN

Express VB

I N S T R U C T I O N M A N U A L

M O D E D ’ E M P L O I

G E B R U I K S A A N W I J Z I N G

G E B R A U C H S A N W E I S U N G

I S T R U Z I O N I P E R L ' U S O

MA N U A L DE INSTRUCCION E S

I N S T R U K C J A O B S Ł U G I

Instructions to the specialist dealer

This instruction manual is part and parcel of the product and must accompany every product sold.

Version: B, 2016-08

No part of this manual may be reproduced in any form what so ever (print, photocopy, microfilm or any other process) without

written permission of the publisher, or processed, duplicated or distributed by using electronic systems.

Instructions pour les distributeurs

Ce manuel d'instructions fait partie du produit et doit accompagner chaque produit vendu.

Version : B, 2016-08

Aucune partie de ce manuel ne peut être reproduite, sous quelque forme que ce soit (imprimée, photocopie, microfilm ou tout autre

procédé) sans l'autorisation écrite du publicateur, ni traitée, dupliquée ou distribuée à l'aide de systèmes électroniques.

Instructies voor de vakhandelaar

Deze handleiding is deel van het product en dient bij iedere product te worden geleverd.

Versie: A, 2016-08

Alle rechten, inclusief vertaling, voorbehouden.

Niets uit deze handleiding mag geheel of gedeeltelijk in enige vorm (druk, fotokopie, microfilm of ieder ander procedé) zonder de

schriftelijke toelating van de uitgever worden gereproduceerd of met behulp van elektronische systemen worden verwerkt,

gekopieerd of verspreid.

Hinweise für den Fachhändler

Diese Gebrauchsanweisung ist Bestandteil des Produkts und ist bei jeder Produkts auszuhändigen.

Version: B, 2016-08

Alle Rechte, auch an der Übersetzung, vorbehalten.

Kein Teil der Gebrauchsanweisung darf in irgendeiner Form (Druck, Fotokopie, Mikrofilm oder einem anderen Verfahren) ohne

schriftliche Genehmigung des Herausgebers reproduziert oder unter Verwendung elektronischer Systeme verarbeitet, vervielfältigt

oder verbreitet werden.

Istruzioni per il rivenditore

Il presente Manuale di istruzioni è parte integrante del prodotto e deve essere fornito assieme alla prodotto.

Versione: B, 2016-08

Il presente manuale non può essere riprodotto, neppure parzialmente, con alcun mezzo (stampa, fotocopia, microfilm o altro

procedimento) senza l’autorizzazione scritta della casa produttrice, né elaborato, duplicato o distribuito con l’ausilio di sistemi

elettronici.

Instrucciones destinadas a los distribuidores especializados

El presente manual de instrucciones es parte integrante del producto y se debe adjuntar a todas las producto que se vendan.

Versión: B, 2016-08

Se prohíbe la reproducción total o parcial del presente manual de cualquier forma (impresión, fotocopia, microfilm o cualquier otro

procedimiento), así como la edición, copia o distribución empleando sistemas electrónicos, sin el permiso escrito del editor.

Instrukcje dla wyspecjalizowanego sprzedawcy

Niniejsza instrukcja obsługi jest nieodłączną częścią produktu i musi być dołączona do każdego sprzedawanego produktu.

Wersja: B, 2016-08

Wszelkie prawa zastrzeżone, łącznie z tłumaczeniem.

Żadna część niniejszej instrukcji nie może być powielana w jakiejkolwiek formie (drukowanej, fotokopii, mikrofilmu ani innej) bez

pisemnej zgody wydawcy, nie może być również przetwarzana, kopiowana ani rozprowadzana za pomocą systemów

elektronicznych.

Express VB

2016-08

Page 1

Contents

1 Product description ............................................................................................................. 3

1.1 Intended Use ............................................................................................................... 3

1.2 Technical specifications .............................................................................................. 4

1.3 Components ................................................................................................................ 6

1.4 Accessories ................................................................................................................. 6

1.5 Explanation of symbols .............................................................................................. 6

1.6 Safety instructions ...................................................................................................... 7

2 Use ........................................................................................................................................... 8

2.1 Remarks on electromagnetic compatibility (EMC) .................................................... 8

2.2 Carrying the electric wheelchair ................................................................................. 9

2.3 Assembly and disassembly of the electric wheelchair ............................................... 9

2.4 Fold up or unfolding the wheelchair ......................................................................... 10

2.5 Mounting or removing backrest ................................................................................ 11

2.6 Mounting or removing battery housing ..................................................................... 11

2.7 Mounting or removing armrest ................................................................................. 12

2.8 Mounting or removing of the footrests ..................................................................... 13

2.9 Operating the parking brakes .................................................................................... 13

2.10 Transfer in and out the electric wheelchair ............................................................... 14

2.11 Correct position in the electric wheelchair ............................................................... 14

2.12 Driving the electric wheelchair ................................................................................. 14

2.13 Operating the electromagnetic brakes ...................................................................... 15

2.14 Driving the electric wheelchair on stairs .................................................................. 18

2.15 Driving the electric wheelchair on ramps ................................................................. 18

2.16 Pushing the wheelchair ............................................................................................. 19

2.17 Transport in the car ................................................................................................... 20

2.18 Transport in an airplane ............................................................................................ 20

2.19 Batteries .................................................................................................................... 21

2.20 Battery charger .......................................................................................................... 21

2.21 Charging the batteries ............................................................................................... 21

2.22 Thermal fuse ............................................................................................................. 22

3 Installation and adjustment ............................................................................................. 22

3.1 Tools ......................................................................................................................... 22

3.2 Manner of delivery ................................................................................................... 22

3.3 Possible adjustments ................................................................................................. 23

3.4 Battery connections .................................................................................................. 24

3.5 Changing the batteries .............................................................................................. 25

3.6 Tyre changing ........................................................................................................... 25

4 Maintenance ........................................................................................................................ 27

Express VB

2016-08

Page 2

Preface

First of all we want to thank you for putting your trust in us by selecting one of our products.

The expected lifetime of your electric wheelchair is strongly influenced by the care and

maintenance of the wheelchair.

This manual will help you get acquainted with the operation of your electric wheelchair.

Following of the user instructions and the maintenance instructions are an essential part of

the warranty.

This manual reflects the latest product developments. Vermeiren has the right to introduce

changes without the obligation to adapt or replace previously delivered models.

For any further questions, please consult your specialist dealer.

Express VB

2016-08

Page 3

1 Product description

1.1 Intended Use

The electric wheelchair Express VB is equipped with two motors, of 150W.

The electric wheelchair Express VB is intended to comfortably transport persons with walking

difficulties or no walking abilities. This electric wheelchair is designed to transport 1 person.

The electric wheelchair is designed to transport persons only, no goods.

Neither should it be used by persons obviously suffering from physical or mental limitations

(e.g. visual impairment, ...) that render them incapable of safely handling the electric

wheelchair.

The different types of fittings and accessories, and the modular construction allow full use by

persons disabled by:

 paralysis

 loss of limbs (leg amputation)

 limb defects or deformations

 stiff or damaged joints

 heart insuffiencies and poor blood circulation

 balance disturbances

 cachexia (decrease in muscle)

The electric wheelchair shall not be used by persons that are in a condition that they can fall

out the electric wheelchair, or use for these patients safety belts.

The electric wheelchair is classified as class A.

The electric wheelchair is suited for indoor and limited outdoor use by the occupant.

The user can operate the wheelchair by himself or have the wheelchair pushed by an

attendant with the handgrips.

When providing for individual requirements:

 body size and weight (max. 90 kg)

 physical and psychological condition

 residential circumstances

 environment

should be taken into consideration.

Your electric wheelchair should be used on flat surfaces where all four wheels are touching

the ground and where there is sufficient contact to operate the wheelchair safely.

You should practice for use on uneven surfaces (cobblestones, etc.), slopes, curves and to

get past obstacles (curbs, etc.). A particular risk is involved when crossing surfaces such as

ice, grass, rubble, foliage, etc.

The electric wheelchair should not be used as a ladder, nor is it a transport for heavy or hot

objects.

When using your electric wheelchair on streets or footpaths, local laws and regulations apply.

The electric wheelchair can be used on sidewalks, urban road. Under no circumstances the

electric wheelchair may be used for driving on larger roads or expressways.

Use only Vermeiren approved accessories.

Express VB

2016-08

Page 4

The manufacturer is not liable for damage caused by the lack of improper service or as a

result of not following instructions from this manual.

Visually impaired people can contact the dealer for the instructions for use.

1.2 Technical specifications

Technical terms below are valid for the electric wheelchair in standard settings and optimum

environmental conditions. If accessories are used, the tabulated values will change. Changes

in outdoor temperatures, humidity, uphill's, downhill's, soils and battery levels can reduce

output.

Brand

V

ermeiren

Address

V

ermeirenplein 1/15, B-2920 Kalmthout

Type Electric wheelchai

r

, Class

A

Model Express

V

B

Maximum occupant mass 90 kg

Description Dimensions

Effective seat width 390 mm 420 mm 440 mm 460 mm 500 mm

Overall width (depends on the seat

width)

580 mm 610 mm 630 mm 650 mm 690 mm

Description Dimensions Minimum Dimensions Maximum

Max. speed 6 km/h

Continuous driving distance range* Approx. 18 km (Battery 38 Ah)

Approx. 25 km (Battery 50 Ah)

Overall length with footrest 950 mm

Overall height (backrest included) 960 mm

Folded / dismantled length (without

footrests, battery housing)

790 mm

Folded / dismantled width

(wheelchair folded)

400 mm

Folded / dismantled height (back

folded, without armrests)

710 mm (for seat width 460 mm; depends on seat width)

Total mass From 67 kg (For seat width 390 mm;

depends on seat width and any accessories)

Mass of heaviest part (that can be

dismantled or removed)

Frame, armrest + joystick, seat cushion, backrest cushion:

From 29,95 kg

Masses of parts that can be

dismantled or removed.

A

rmrest without joystick: 1,60 kg; Footrests: 1,85 kg;

Battery housing: 15,90 kg/piece (Batteries: 13,5 kg/piece);

Backrest: 1,80 kg

Static stability downhill 7,5°

Static stability uphill 12°

Static stability sideways 10°

Max. safe slope 7°

Obstacle climbing 15 mm

Ground clearance 30 mm

Seat plane angle 5°

Effective seat depth 430 mm

Thickness seat cushion 40 mm

Seat surface height at front edge

(with seat cushion)

540 mm

Backrest angle 5°

Backrest height 430 mm

Express VB

2016-08

Page 5

Brand

V

ermeiren

Address

V

ermeirenplein 1/15, B-2920 Kalmthout

Type Electric wheelchai

r

, Class

A

Model Express

V

B

Maximum occupant mass 90 kg

Description Dimensions Minimum Dimensions Maximum

Distance between footrest and seat 400 mm 520 mm

Angle between footrest and

footplate

80° 100°

Angle between seat and footrest 105°

Angle between seat and footplate 5° 25°

Distance between armrest and seat

(with seat cushion

225 mm 315 mm

Front location of armrest structure 400 mm

Driving motors 2 x 150W + Electromagnetic braking system

Batteries 2 x 12V AGM / 38 Ah or 50 Ah / 20 hr

Battery charger

See separate manual battery charger (Use ONLY the battery charger

that is delivered with your electric wheelchair)

Thermal fuse 30 AMP

Operator control See separate operator control

Minimum turning diameter Approx. 1400 mm

Reversing width Not applicable

Diameter Rear wheels (number) 12 1/2 x 2 1/4" air (2)

Tyre pressure, rear wheels ** Max. 2,5 bar

Diameter front wheels (number) 8 x 1 3/4 mm air (2)

Tyre pressure, front wheels ** Max. 2,5 bar

Noise level < 65 dB (A)

Storage and use temperature -20 °C to +40 °C

Operating temperature of the

electronics

-10 °C to +40°C

Storage and use humidity 30% 70%

We reserve the right to introduce technical changes. Measurement tolerance ± 15 mm / 1,5 kg / ° .

* The theoretical driving distance will be reduced if the wheelchair is used frequently on slopes, rough

ground or to climb curbs.

**Since different tyres may be used, please note the correct operating pressure of the tyres you use.

For other tyre diameters refer to your specialist dealer.

Table 1: Technical specifications

The wheelchair complies to the requirements set up in:

ISO 7176-8: Requirements and test methods for static, impact and fatigue strengths.

ISO 7176-14: Wheelchairs - Part 14: Power and control systems for electrically powered

wheelchairs and scooters -- Requirements and test methods

EN 1021-1: Furniture - Assessment of the ignitability of upholstered furniture - Part 1 :

Ignition source smouldering cigarette

EN 1021-2: Furniture - Assessment of the ignitability of upholstered furniture - Part 2 :

Ignition source match flame equivalent

Express VB

2016-08

Page 6

1.3 Components

1.4 Accessories

The following accessories are available for the electric wheelchair Express VB:

 Back inclination (SE52)

 Formed backrest and seat (L24 / L25)

1.5 Explanation of symbols

1 = Handgrips

2 = Backrest

3 = Adjustable armpads

4 = Armrests

5 = Battery housings + Batteries

6 = Parking brakes

7 = Driving wheels (rear wheels)

8 = Driving Motors

9 = Basic frame

10 = Front forks

11 = Steering wheels (Front wheels)

12 = Footplate

13 = Footrests

14 = Identification plate

15 = Seat cushion

16 = Operator control

17 = Cross

Maximum mass

Indoor and limited outdoor use

Indoor use (only for battery charger)

Separate recovery and recycling of electric and electronic devices (only for battery charger)

Protection class II

Maximum safe slope

CE conformity

Maximum speed

Express VB

2016-08

Page 7

1.6 Safety instructions

L To prevent injury and/or damage to your wheelchair, make sure that no objects and/or

body parts are caught in the rims of the driving wheels.

L Follow the instructions for using your wheelchair. For example, avoid driving without

brakes against an obstacle (step, edge of the curb) or dropping down from steps.

L When getting into and out of the wheelchair, do not stand on the footplates. The

footplate should be folded up beforehand.

L Investigate the effects of shifting the centre of gravity on the behavior of the wheelchair,

for example on up or down gradients, on laterally sloping ground, or when overcoming

obstacles. Obtain support from an attendant.

L If you want to pick up something (lying in front of, on the side, or to the rear of the

wheelchair), you should not lean too far out to avoid tipping over.

L When moving through doors, arches, etc. ensure that there is enough room at the sides

so that you do not get your hands or arms caught or crushed and that there is no

damage to the wheelchair.

L Avoid uncontrolled rolling against obstacles (steps, curbs, doorframes, etc) or dropping

down from ledges. The manufacturer cannot assume liability for damage caused by

overloading, collision or other improper use.

L When moving in public places, you are subject to local regulations.

L Influence of medicine or alcohol reduces your driving capabilities.

L When travelling outdoors, adapt your driving to weather and traffic conditions.

L Do not use your electric wheelchair in rainy conditions.

L Do not put your electric wheelchair into the free-wheeling position on slopes.

L Never reverse uphill.

L Reduce speed when you go round corners.

L To be better visible when driving in the dark, wear the brightest possible clothing or

clothes with reflectors and make sure that the reflectors of the wheelchair are clearly

visible and drive with lightning on.

L Make sure that the lights and reflectors of your electric wheelchair are free from dirt

and/or other objects that could hide them.

L When transporting the wheelchair, never pick it up by grasping movable parts (wheels,

arm supports, footrests, etc.)

L When transporting the electric wheelchair, no persons may be transferred along with it.

L No additional passengers may be taken.

L When storing or parking your electric wheelchair outside, protect it with a shrouding

cover against humidity.

L High levels of humidity or very cold conditions can reduce the performance of your

electric wheelchair.

L Never use your electric wheelchair as a seat in an automobile or other vehicle.

Not intended to be used as a seat in a Motor vehicle

Position: Parking brakes activated (electric driving possible)

Position: Parking brakes deactivated (free running and pushing possible, no electric driving)

During free running, be careful with slopes and inclinations

Type designation

Express VB

2016-08

Page 8

L Never exceed the maximum load of 90 kg.

L Use only Vermeiren approved accessories.

L Before getting on or off, taking apart or transporting your electric wheelchair, put your

wheelchair off with "ON/OFF" button.

L Check that the profile depth of the tyres is adequate.

L If your electric wheelchair has pneumatic tyres, be careful to inflate them to the correct

pressure (see pressure indication on the tyres).

L Stairs may only be negotiated by an attendant. If devices and furnishings like ramps or

lifts are available, use them.

L Risk of injury in case of a sudden stop - Always use the safety belt.

L Use restraining safety belts for patients that makes extreme movements so the

wheelchair can tip over.

2 Use

This chapter describes the everyday use. These instructions are for the user and the

specialist dealer.

To find a service facility or specialist dealer near you, contact the nearest Vermeiren facility.

A list of Vermeiren facilities can be found on the last page.

The electric wheelchair is delivered fully assembled by your specialist dealer. The

instructions intended for the specialist dealer for adjusting the electric wheelchair are given in

§ 3.

2.1 Remarks on electromagnetic compatibility (EMC)

Your electric wheelchair has been tested according EN 61000-4-3 and EN 61000-4-2 for

EMC-compliance.

We wish to point out that sources of electromagnetic waves are liable to create interferences.

The electronics of the wheelchair itself could affect other electric appliances too.

To reduce the effect of electromagnetic sources of interference, please read the following

warnings:

L WARNING: The wheelchair might disturb the operation of devices in its

environment that emit electromagnetic field.

L WARNING: The driving performance of the wheelchair can be influenced by

electromagnetic fields (e.g. electricity generators or high power sources).

L WARNING: Avoid using any portable TV or radio in the immediate environment of

your wheelchair for as long as it is turned on.

L WARNING: Avoid using any transmitter-receiver in the immediate environment of

your wheelchair for as long as it is turned on.

L WARNING: Check the area for transmitter masts and avoid using the wheelchair

close to them.

L WARNING: If involuntary movements or braking occur, turn off the wheelchair as

soon as it is safe to do so.

Interfering electromagnetic fields may have a negative effect on the wheelchair’s electronic

systems. These can include:

 Disengagement of the engine brake

 Uncontrollable behavior by the wheelchair

 Unintentional steering movements

Express VB

2016-08

Page 9

In the presence of very strong or enduring interfering fields, the electronic systems could

even break down entirely or suffer permanent damage.

Possible sources of radiation include:

 Portable receiver and transmitter installations (receiver and transmitter with fixed

antenna)

- Transmitting and receiving sets

- Portable TV, radio and navigation devices

- Other personal transmitting devices

 Mobile medium-range transmitting and receiving devices (e.g. car antennas)

- Fixed transmitting and receiving sets

- Fixed mobile transmitting and receiving devices

- Fixed radio, TV and navigation systems

 Long-range transmitting and receiving devices

- Radio and television towers

- Amateur radio sets

 Other home devices

- CD player

- Notebook

- Microwave oven

- Cassette recorder

- etc.

Devices like electric shavers and hair dryers will have no influence provided that they

function perfectly and their cabling be in an excellent condition. Please conform to the

operating instructions accompanying such electric instruments to ensure trouble free

operating of your wheelchair.

2.2 Carrying the electric wheelchair

The best way to carry the electric wheelchair is to make use of free-wheel mode of the

electric wheelchair. Place the wheelchair in free-wheel mode and roll the wheelchair with the

handgrips to the desired place.

When the wheelchair must be taken up or down stairs, do this with the wheelchair ramps or

lift systems. At least two persons are required to move the wheelchair up or down stairs or

over single steps.

Another way to carry the electric wheelchair is to dismantle the electric wheelchair. Carry the

separate parts (frame, armrests, footrests, battery housings, backrest) to the desired place.

Grasp the wheelchair only on fixed frame parts (never by the footrests, armrests and

wheels).

2.3 Assembly and disassembly of the electric wheelchair

The electric wheelchair is delivered fully assembled. Your dealer delivers the wheelchair fully

assembled and explains the various operating elements and their use. However, for your

own safety we provide a further, detailed explanation of the different parts.

Express VB

2016-08

Page 10

2.3.1 Assembly of the electric wheelchair

L

CAUTION: Risk of clamping – Check that no cables can be squashed or

squeezed.

To assembly the electric wheelchair:

1. Unfold the wheelchair (paragraph 2.4).

2. Mount the backrest (paragraph 2.5).

3. Mount the 2 battery housings (paragraph 2.6).

4. Mount the armrests (paragraph 2.7).

5. Mount the footrests (paragraph 2.8).

6. Fold the footplates of the footrests down.

To disassembly the electric wheelchair do the reverse of the above instructions.

2.4 Fold up or unfolding the wheelchair

L

CAUTION: Risk of clamping – Keep fingers, buckles, clothes away from moving

parts of the wheelchair (eg. cross, ...).

To unfolding the wheelchair:

1. Position yourself behind the wheelchair.

2. Use the hand-grips to open the wheelchair as much as possible.

3. Position yourself at the front of the wheelchair.

4. Push both seating tubes down till they are fixed in their position.

5. Place the battery housings on the guide rails.

To fold up the wheelchair:

1. Remove the battery housings.

2. Fold or remove the footplates (see § 2.8).

3. Take the seat on the front side and backside and pull it up.

Express VB

2016-08

Page 11

2.5 Mounting or removing backrest

L

WARNING: Risk of injury – Make sure that both securing levers  are engaged.

L CAUTION: Chance of pinching – Do not place fingers between the backrest tubes

of the wheelchair.

For transport the backrest of the wheelchair can be completely removed and put on the seat.

To mount the backrest on the electric wheelchair:

1. Check that the levers  are not fixated otherwise

loosen the levers .

2. Mount the backrest tubes Ⓐ in the hexagonal

tubes of the frame Ⓑ.

3. Retighten the levers  properly.

To remove the backrest from the electric

wheelchair:

1. Turn on the levers  until they come loose.

2. Remove the backrest tubes Ⓐ out the hexagonal

tubes of the frame Ⓑ.

3. Put the backrest on the seat for transportation.

2.6 Mounting or removing battery housing

L

CAUTION: Chance of pinching – Do not place fingers between the battery

housings and guide rails of the wheelchair.

To mount the battery housings on the electric wheelchair:

1. Grasp the handgrip  of the first battery housing (without thermal fuse) .

2. Lift the battery housing  on the side rails  of your wheelchair.

3. Push the battery housing  as much as possible under the seat of the wheelchair.

4. Check that the connectors (battery, power module) fits in each other.

5. Grasp the handgrip  of the battery housing (with thermal fuse) .

6. Lift the battery housing  on the side rails  of your wheelchair.

7. Push the battery housing  backwards.

8. Check that the battery connectors  fits in each other.

9. Turn the plate  downwards.

10. Retighten the star knob .

Express VB

2016-08

Page 12

To remove the battery housings of the electric wheelchair:

1. Loosen the star knob .

2. Rotate the plate  upwards and to the left.

3. Grasp the handgrip  of the first battery housing (with thermal fuse) .

4. Slide the battery housing backwards until the battery connectors  come loose.

5. Lift the first battery housing  out the wheelchair.

6. Slide the second battery housing  backwards until you can lift the housing out the

wheelchair frame.

7. Lift the second battery housing  out the wheelchair.

2.7 Mounting or removing armrest

L

WARNING: Risk of injury and/or damage - Make sure that the levers  are

properly tightened before using the wheelchair.

L WARNING: Risk of tipping over - Check that the armrests are at the same height

on each side.

L CAUTION: Risk of clamping – Keep fingers, buckles and clothes away from the

attachment points of the armrests.

The armrests can be removed so the patient can be moved sideways. The armrests

can also be removed for therapeutic purposes and to move the patient from the wheelchair.

To mount the armrests on the electric wheelchair:

1. Mount the armrests  in the rectangular tube .

2. Retighten the handle  properly. (If the lever of handle

 is not in a good position, press on button  on the

handle and place the lever  in a good position that no

risk of injury to the hands can appear.)

To remove the armrests from the electric wheelchair:

1. Turn on the handle  until it come loose. (If the lever

of handle  is not in a good position, press on button

 on the handle and place the lever  in a good

position that no risk of injury to the hands can appear.)

2. Remove the armrests  out the rectangular tube .

The armrests are adjustable in different heights over a range of 90 mm (stepless). Keep a

safe distance from 10 mm on the bottom of the armrest.

1. Loosen the lever  a little.

2. Move the rectangular tubes

 and  over each other until the desired armrest height.

3. Retighten the lever  hand-tightened.

4. Check that the lever  is securely fixed.

5. Adjust the other armrest with the same instructions.

Express VB

2016-08

Page 13

2.8 Mounting or removing of the footrests

L

CAUTION: Risk of injury – Make sure that the footrests are firmly fixated.

The mounting of the footrests is done as follows:

1. Hold the footrest sideways at the outside of the

wheelchair frame and mount the tube hood

 into the

frame.

2. Swing the footrest inwards till it clicks in position.

3. Swing the foot plate downwards.

4. Check that the footrest is well fixated.

To take off the footrests:

1. Pull handle

.

2. Swing the footrest to the outside of the wheelchair till it

comes loose from the guidance.

3. Pull the footrest from tube hood

.

2.9 Operating the parking brakes

For each drive wheel your electric wheelchair has standard parking brakes.

L WARNING: The brakes are not used to slow down the wheelchair during

movements – Use the brake only to prevent the wheelchair from unintended

movements.

L WARNING: Good operation of the brakes is influenced by wear and

contamination of the tires (water, oil, mud, …) – Check the condition of the tires

before each use.

L WARNING: The brakes are adjustable and can wear – Check the operation of the

brakes before each use.

To apply the brakes:

1. Push the brake levers  forward till you feel a

distinctive click.

L CAUTION: Risk of unintended movement –

Make sure the wheelchair is on a flat

horizontal surface before releasing the

brakes. Never release both brakes

simultaneously.

To release the brakes:

1. Release one brake by pulling the lever 

backwards.

2. Release the second brake by pulling the lever

backwards.

Express VB

2016-08

Page 14

2.10 Transfer in and out the electric wheelchair

L

WARNING: Power down the wheelchair before getting in or out the wheelchair.

L CAUTION: In case you cannot perform the transfer in a safe manner, ask

someone to assist you.

L CAUTION: Risk of injury – Do not use the joystick, footplates, armrests as

support.

L CAUTION: Risk of tipping over of the wheelchair – Do not stand on the footplates.

1. Park the electric wheelchair as close as possible to

the place where you want to transfer.

2. Check that the operator unit is switched off. Make

sure that the wheelchair is NOT in freewheel

mode.

3. Fold the footplates upwards to prevent standing on

them.

4. If the transfer is on the side of the wheelchair,

remove the armrest on that side.

5. Transfer to / from the electric wheelchair.

2.11 Correct position in the electric wheelchair

Some recommendations for a comfortable use of the electric wheelchair:

1. Position your backside as close as possible to the backrest.

2. Make sure your upper legs are horizontal – If needed adjust the length of the footrests.

2.12 Driving the electric wheelchair

L WARNING: Risk of burns – Be careful when driving in hot or cold environments

(sunshine, extreme cold, etc.) for a sufficient amount of time and when

touching - Surfaces can assume the environment temperatures.

L WARNING: Risk of unsafe settings - Use only the driving characteristics

described in this manual.

2.12.1 Preparing the electric wheelchair for use

When you start using your electric wheelchair, make sure that it is standing on level ground.

All wheels must be in contact with the ground.

1. Make sure that the freewheel mode is OFF and the operator unit is switched off.

2. Adjust the wheelchair best suited for yourself.

3. Set the operator unit in the most comfortable position.

4. Sit down on the seat and verify that both armrests have been adjusted so your

forearms are folded down.

5. Put your wheelchair on with the "ON/OFF" button from the operator unit.

Now put the speed control on the operator unit to the minimum position. Your electric

wheelchair is now ready for use.

2.12.2 Handling after usage

Before getting off from your electric wheelchair, make sure that all four wheels touch the

ground simultaneously.

Push on the "ON/OFF" button from the operator unit, the display of the operator unit goes

out.

Express VB

2016-08

Page 15

2.13 Operating the electromagnetic brakes

Let go of the joystick to stop the electric wheelchair.

2.13.1 Parking the electric wheelchair

Once your electric wheelchair has been turned off, no command can be sent to the driving

system. Always park your electric wheelchair on sites that are easy accessible and on

horizontal surfaces that the four wheels are touching the ground.

2.13.2 Operator units

The instructions for use from the operator units you can find in the seperate user manals of

the operator units that is included with your wheelchair.

Changing the software is only allowed by Vermeiren. For changes in the software

contact Vermeiren.

2.13.3 Adjusting operator unit

L

CAUTION: Risk of pinching - Do not put your fingers between the operator

control and the other parts when positioning the operator unit.

The operator unit's horizontal position can be changed:

1. Loosen screw  just under the armrest a little bit.

2. Move the operator unit to the desired position or remove the operator unit.

3. Retighten screw  properly.

If you pull screw  to the side, the operator unit can be turned to the side.

NOTE: Depending on the features of your wheelchair, screw  could also be located

beneath the guide tube ➁ .

2.13.4 Connections for charger / program unit

L

WARNING: Risk of injury - Check that all plugs (battery charger and

programming unit) are removed before setting the wheelchair in motion.

The socket  for connecting the charger supplied is

located on the front of the operator unit. Here, too, is the

connnection for the programming unit, which should only

be connected and used by authorised persons who have

been trained to program it (Vermeiren personnel).

Make sure that the joystick is in the neutral (central)

position when pressing the on/off button, otherwise

the electronics will be blocked. This block can be

lifted by switching the control unit off and then on

again.

1

2

Express VB

2016-08

Page 16

2.13.5 Your first trip

L

WARNING: Control your electric wheelchair - Accustom yourself with the driving

behavior of your electric wheelchair.

 Driving

Once you are seated on your electric wheelchair and have started it as described above,

take the joystick with your hand and push this in the required direction i.e.:

PUSH ACTION FORWARD = FORWARD MOVEMENT

PUSH ACTION BACKWARD = BACKWARD MOVEMENT

 Braking

To brake, let go of the joystick, which will let it return to the zero position and slow down your

electric wheelchair to a gentle stop. Practice pulling away and braking to get accustomed to

the electric wheelchair. You need to be able to estimate how your electric wheelchair will

react when you drive or brake.

 Driving in corners and bends

L WARNING: Risk of tipping over - Reduce your speed before you enter a curve or

corner.

L WARNING: Risk of clamping - Always maintain an adequate distance from

corners and obstacles.

Move the joystick into the position you wish to turn. The front wheels will turn accordingly and

steer the electric wheelchair into a new direction. It is very important that you ensure that

there is enough space allowing you to go around bends and corners. Narrow passages must

preferably be approached in a large curve so as to allow you to enter the narrowest part as

straight from the front as possible.

Take care not to enter curves and corners diagonally. By ‘cutting the corner’, chances are

that your rear wheels, back of wheelchair will run into obstacles and destabilize your electric

wheelchair.

2.13.6 Backward movement

L

WARNING: Control your electric wheelchair - Accustom yourself with the driving

behavior of your electric wheelchair.

L WARNING: Control your speed - Always go backward in the lowest speed

possible.

L WARNING: Risk of collision - Always look to the back when you go backward.

Backward driving requires increased concentration and care. This explains why we have

greatly reduced the speed of backward movement in comparison with forward driving. But we

still recommend that you put the speed on minimum when you drive backward.

Left and right controls act inverse when driving backwards.

Express VB

2016-08

Page 17

2.13.7 Going uphill

L

WARNING: Control your electric wheelchair - Accustom yourself with the driving

behavior of your electric wheelchair.

L WARNING: Control your electric wheelchair - Never put your electric wheelchair

in freewheel on slopes.

L WARNING: Control your speed - Move on slopes as slow as possible.

L WARNING: Risk of tipping over - Do not exceed the maximum gradient of static

and dynamic stability uphill (see paragraph "Technical specifications").

L WARNING: Never reverse going uphill.

Always approach slopes directly from the front and, to avoid tipping over, see that all four

wheels stay in contact with the ground at all times (ramps, driveways, etc.).

If you come to a stop on a slope by letting go of the joystick, the engine break will prevent

your electric wheelchair from rolling backward. As soon as the joystick returns to zero

position, the engine break is activated.

To resume your uphill drive, push the joystick as much as possible to the front to ensure the

release of a sufficient amount of power. This will allow your electric wheelchair to slowly

ascend the slope.

If your wheelchair is unable to drive up, turn the speed control up and try again.

2.13.8 Going downhill

L

WARNING: Control your electric wheelchair - Accustom yourself with the driving

behavior of your wheelchair.

L WARNING: Control your wheelchair - Never put your electric wheelchair in

neutral on slopes.

L WARNING: Control your speed - Move on slopes as slow as possible.

L WARNING: Risk of tipping over - Avoid sharp bends.

L WARNING: Risk of tipping over - Do not exceed the maximum gradient of static

and dynamic stability downhill (see paragraph "Technical specifications").

Always approach downhill slopes directly from the front. Slantwise approaches can lead to

some of the wheels no longer staying in contact with the ground (danger of tipping over).

The weight of the electric wheelchair will increase your downhill speed. Lower the speed on

the operator unit.

Avoid sharp bends on downhill slopes. The weight of your electric wheelchair could cause

your electric wheelchair to lift up on one side or even fall over around bends.

Express VB

2016-08

Page 18

2.14 Driving the electric wheelchair on stairs

L

WARNING: Risk of injury - Sit quietly in your wheelchair and avoid jerky

movements. If you cannot sit quietly when being transported because of illness

or disability (e.g. slightly spastic, etc.), then at least two persons are required to

secure the wheelchair on both sides by taking hold of fixed parts of the frame.

L WARNING: Risk of injury – Wear suitable safety belt systems while being

transported (information obtainable from your specialist dealer).

L WARNING: Risk of injury – Make sure that your arms and legs do not protrude

outside the wheelchair while being driving on stairs.

If you want to be taken up or down stairs with the wheelchair, you will need a wheelchair

ramps or wheelchair liftsystems.

2.15 Driving the electric wheelchair on ramps

L

WARNING: Risk of injury - Do not exceed the maximum load of the ramps.

L WARNING: Risk of injury - Choose the correct ramps to prevent injury or

damage.

L WARNING: Risk of injury - Be sure that the wheel height is high enough to get

over the free height of the ramps. The electric wheelchair frame may not touch the

ramps.

L WARNING: Risk of injury - Use a restraining safety belt to secure yourself in your

wheelchair.

L WARNING: Risk of tipping over - Put the adjustment functions (seat, backrest,

footrests, ...) so that the wheelchair has the best stability.

Should you wish to use ramps to drive over an obstacle, please note the following:

1. Find out from the manufacturer what the maximum load is for the ramps.

2. Drive on the ramps at the lowest speed possible.

3. See the instructions in the chapter "your first trip".

If the wheelchair has adjustment functions, ensure that (because these has influence on the

stability of the electric wheelchair):

1. The seat is in the lowest position as possible and in the horizontal position.

2. The backrest is in the upright position.

3. The footrests have been set so that no collision can occur while passing the obstacle.

If another person is pushing you, note that the large weight of the electric wheelchair exerts

appreciable reverse forces.

La page est en cours de chargement...

Vermeiren EXPRESS Manuel utilisateur

Vermeiren EXPRESS Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents