Windsor Radiant with ORB Technology Le manuel du propriétaire

Catégorie
Machine à plancher
Taper
Le manuel du propriétaire
8.638-856.0-E 07/13/20
RADIANT ORBITAL SCRUBBER
Operator’s Manual
Floor Machine
MODEL: 1.005-297.0
2 8.638-856.0 Manual Operators - Radiant Orbital Scrubber
All Radiant equipment have been carefully tested and inspected at our USA factory. Radiant machines are
guaranteed for one year from the date of original purchase against defects or workmanship made during
manufacture. Within the guarantee period we undertake at our discretion, to repair or replace any part
found to be defective, free of charge to the purchaser with subject to the following conditions:
Claims made under the terms of the guarantee must be supported by the original invoice issued at the
time of sale along with the machine serial number.
For claims under this guarantee contact the supplier from whom you’ve purchased the product who will
arrange the appropriate action. Do not initially return the product as this could lead to transit damage.
Neither Radiant nor its distributors will be held responsible for any incidental or consequential loss.
This guarantee does not cover:
Periodic maintenance, repair, or replacement of parts due to normal wear and tear.
Damage caused by accident, misuse or neglect, fire, or the fitting of other than genuine Radiant parts.
Defects in other than genuine Radiant parts, repairs, modifications or adjustments made by other than
a Radiant service engineer or authorized service dealer. Costs and risks of transport relating directly or
indirectly to the guarantee of this product. Consumable items such as brushes, drivers, velcro discs,
gliders, pads, and so forth. Radiant has a policy of continual product development and we reserve the right to alter
specifications without prior notice.
3
Machine Data Label . . . . . . . . . . . . . . . . . . . . . . . . . .2
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . .3
How To Use This Manual . . . . . . . . . . . . . . . . . . . . .4
Grounding Instructions 120V . . . . . . . . . . . . . . . . . .5
Hazard Intensity Level . . . . . . . . . . . . . . . . . . . . . . .8
Safety Label Location . . . . . . . . . . . . . . . . . . . . . . .10
Technical Specifications . . . . . . . . . . . . . . . . . . . . .11
Unpacking and Initial Operations . . . . . . . . . . . . . .12
Pre-Run Inspection . . . . . . . . . . . . . . . . . . . . . . . . .12
Process of Cleaning . . . . . . . . . . . . . . . . . . . . . . . .13
End of the Application . . . . . . . . . . . . . . . . . . . . . . .13
Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Lifting and Carrying. . . . . . . . . . . . . . . . . . . . . . . . .15
Weight Kit Installation . . . . . . . . . . . . . . . . . . . . . . .15
Brush Installation . . . . . . . . . . . . . . . . . . . . . . . . . .16
Attaching and Removing the Driver Plates . . . . . . .16
Accessories And Applications. . . . . . . . . . . . . . . . .17
Standard Driver Plate . . . . . . . . . . . . . . . . . . . . . . .17
Carpet Pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Chemical Free Stripping Pad . . . . . . . . . . . . . . . . .18
Scrub Brush . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Concrete Brush . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Superzorb Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Carpet Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Cleaning Hard Floors . . . . . . . . . . . . . . . . . . . . . . .20
Cleaning the Machine . . . . . . . . . . . . . . . . . . . . . . .21
Changing The Driver Grip Face . . . . . . . . . . . . . . .21
Handle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Motor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Frame, Wheels, & Pump. . . . . . . . . . . . . . . . . . . . 30
Spray Handle . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Wiring Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
8.638-856.0 Manual Operators - Radiant Orbital Scrubber
4
This manual contains the following sections:
How to Use This Manual
Safety
Operations
Maintenance
Parts List
The HOW TO USE THIS MANUAL section will tell you
how to find important information for ordering correct
repair parts.
Parts may be ordered from authorized dealers. When
placing an order for parts, the machine model and
machine serial number are important. Refer to the
MACHINE DATA box which is filled out during the
installation of your machine. The MACHINE DATA box
is located on the inside of the front cover of this manual.
The model and serial number of your machine is
located on the back of the machine.
The SAFETY section contains important information
regarding hazardous or unsafe practices of the
machine. Levels of hazards are identified that could
result in product damage, personal injury, or severe
injury resulting in death.
The OPERATIONS section is to familiarize the operator
with the operation and function of the machine.
The MAINTENANCE section contains preventive main-
tenance to keep the machine and its components in
good working condition. They are listed in this general
order:
Cleaning the Machine
Changing The Driver Grip Face
The PARTS LIST section contains assembled parts
illustrations and corresponding parts list. The parts lists
include a number of columns of information:
REF – column refers to the reference number
on the parts illustration.
PART NO. – column lists the part number for
the part.
QTYcolumn lists the quantity of the part used
in that area of the machine.
DESCRIPTION – column is a brief description
of the part.
NOTES column for information not noted by
the other columns.
NOTE: If a service or option kit is installed on your
machine, be sure to keep the KIT INSTRUCTIONS
which came with the kit. It contains replacement parts
numbers needed for ordering future parts.
NOTE: The manual part number is located on the
lower right corner of the front cover.
WARNING
8.638-856.0 Manual Operators - Radiant Orbital Scrubber
5
Grounding Instructions 120V
THIS PRODUCT IS FOR COMMERCIAL
USE ONLY
Electrical:
This machine operates on a 14 amp nominal 120 V,
60 hz, A.C. power circuit. The amp, hertz, and voltage
are listed on the data label found on each machine.
Using voltages above or below those indicated on the
data label will cause serious damage to the motors.
Grounding Instructions
This appliance must be grounded. If it should
malfunction or break down, grounding provides a path
of least resistance for electric current to reduce the risk
of electric shock. This appliance is equipped with a cord
that has an equipment-grounding conductor and
grounding plug. The plug must be inserted into an
appropriate outlet that is properly installed and
grounded in accordance with all local codes and ordi-
nances.
This appliance is for use on a nominal 120 volt circuit,
and has a grounded plug that looks like the plug in “Fig.
A”. A temporary adapter that looks like the adapter in
“Fig C” may be used to connect this plug to a 2-pole
receptacle as shown in “Fig. B”, if a properly grounded
outlet is not available. The temporary adapter should
be used only until a properly grounded outlet (Fig. A)
can be installed by a qualified electrician. The green
colored rigid ear, lug, or similar that extends from the
adapter must be connected to a permanent ground
such as a properly grounded outlet box cover.
Whenever the adapter is used, it must be held in place
by a metal screw.
Improper connection of the equipment-grounding
conductor can result in electric shock. Check with
a qualified electrician or service person if you are
in doubt as to whether the outlet is properly
grounded. Do not modify the plug provided with
the appliance - if it will not fit the outlet, have a
proper outlet installed by a qualified electrician.
Le raccordement incorrect du conducteur de terre
d'équipement peut entraîner des risques d'électro-
cution. Vérifiez auprès d'un électricien qualifié ou
d'un responsable de l'entretien si vous avez
quelque doute que ce soit quant au raccordement à
la terre de votre prise murale. Ne modifiez pas la
fiche fournie avec l'appareil: si elle ne correspond
pas à la prise murale, faites installer une prise
adéquate par un électricien qualifié.
USING AN ADAPTOR
GROUNDING CONNECTION
Note: Adaptors are not allowed in Canada.
Outlet
Tab for Grounding
Outlet Box
FIGURE C
Grounded
FIGURE A
Adaptor
Screw
FIGURE B
Adaptor
Metal Screw
Grounded
Grounding Pin
8.638-856.0 Manual Operators - Radiant Orbital Scrubber
6
IMPORTANT SAFETY INSTRUCTIONS
When using this machine, basic precaution must always be followed, including the
following:
READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE.
To reduce the risk of fire, electric shock, or injury:
Use only indoors. Do not use outdoors or expose to rain.
Use only as described in this manual. Use only manufacturers recommended components and attach-
ments.
If the machine is not working properly, has been dropped, damaged, left outdoors, or dropped into water,
return it to an authorized service center.
Do not operate the machine with any openings blocked. Keep openings free of debris that may reduce
airflow.
Do not operate this machine near flammable fluids, dust or vapors.
This machine is suitable for commercial use such as: in hotels, schools, hospitals, factories, shops, and
Offices for more than normal housekeeping purposes.
Maintenance and repairs must be done by qualified personnel.
During operation, use caution around other persons, especially children.
The machine shall only be operated by instructed and authorized persons.
When leaving unattended, unplug the machine.
Do not handle the plug or machine with wet hands.
Do not unplug machine by pulling on cord. To unplug, grasp the plug and not the cord.
Do not use with damaged cord or plug. Follow all instructions in this manual concerning grounding the
machine.
Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or
corners.
Do not pull/run machine over cord. Keep cord away from heated surfaces.
Connect to a properly grounded outlet. See Grounding Instructions.
If the supply cord is damaged it must be replaced by an authorized service agent.
Unplug before cleaning or servicing.
Operational hazard may occur when running the machine over the supply cord.
This appliance has been designed for use with pads specified by the manufacturer. The fitting of other pads
may affect its safety.
This machine is for dry use only and shall not be used or stored outdoors in wet conditions
Moving Parts - To reduce the risk of injury, unplug before servicing.
READ AND SAVE THESE INSTRUCTIONS
8.638-856.0 Manual Operators - Radiant Orbital Scrubber
7
IMPORTANTES MESURES DE SÉCURITÉ
L'utilisation d'un appareil électrique demande certaines précautions:
LIRE TOUTES LES INSTRUCTIONS AVANT DE FAIRE FONCTIONNER CETTE
MACHINE.
Pour réduire les risques d'incendie, de chocs électriques, ou de
blessures.
N'utiliser cette machine qu'en intérieur. Ne jamais l'utiliser à l'extérieur ou dans la pluie.
N'utiliser cette machine que comme décrit dans le présent manuel. N'utiliser que les composants et les accessoires
conseillés par le fabricant.
Lorsque la machine ne fonctionnant pas correctement, a fait l'objet d'une chute ou d'une détérioration, a été laissée
à l'extérieur, est tombée dans l'eau, la retourner au centre de service agréé.
Ne pas opérer la machine lorsque les conduits de ventilation sont bloquées. Débarrasser les débris des conduits,
car ils peuvent réduire l'écoulement d'air.
Ne pas l'utiliser près de liquides, de poussières ou de vapeurs inflammables.
Cette machine est destinée à un usage commercial. Elle est recommandée davantage pour les domaines hôtelier,
scolaire, hospitalier, industriel ou pour les bureaux, les chaînes de magasin, que pour un usage domestique
normal.
L'entretien et les réparations de la machine doivent être effectuées par un personnel qualifié.
Durant la manoeuvre de la machine, prendre garde aux personnes environnantes et notamment aux enfants.
Cette machine ne doit être manoeuvrée que par un personnel expérimenté et qualifié.
Lorsque vous laissez la machine sans surveillance, débranchez-la.
Ne pas toucher la fiche ou l'appareil lorsque vos mains sont humides.
Ne pas débrancher en tirant sur le cordon. Tirer plutôt la fiche.
Ne pas utiliser si le cordon ou la fiche est endommagé
Ne pas tirer soulever ou traîner l'appareil par le cordon. Ne pas utiliser le cordon comme une poignée, le coincer
dans l'embrasure d'unée porte ou l'appuyer contre des arêtes vives ou des coins.
Ne pas faire rouler l'appareil sur le cordon. Garder le cordon à l'écart des surfaces chaudes.
Cet appareil ne doit être connecter qu a des prises ayant une sortie de terre. Se reporter aux instructions de mise
à la terre.
Si le cordon d'alimentation est endommagé, il doit être remplacé par un cordon spécial d'un agent d'entretien
autorisé.
Débranchez la machine avant de la nettoyer ou la réparer.
Un risque opérationnel est probable lors du fonctionnement de la machine avec une surcharge du cordon d'alimen-
tation.
Cet appareil a été conçu pour être utilisé avec des coussins protecteurs spécifiés par le fabricant. L'utilisation
d'autres coussins protecteurs peut affecter sa securité.
Cette machine est faite pour un usage à sec seulement et ne doit pas être utilisée ou rangée à l'extérieur dans des
conditions humides.
Pièces Mobiles - Afin de réduire le risqué de blessure, débranchez avant de procedér á l'entretien. Utilisez á
l'intérieur uniquement.
CONSERVER CES INSTRUCTIONS
8.638-856.0 Manual Operators - Radiant Orbital Scrubber
8
The following symbols are used throughout this guide as indicated in their descriptions:
Hazard Intensity Level
There are three levels of hazard intensity identified by signal words -WARNING, CAUTION, and FOR SAFETY.
The level of hazard intensity is determined by the following definitions:
WARNING
WARNING - Hazards or unsafe practices CAN result in severe personal injury or death.
CAUTION
CAUTION - Hazards or unsafe practices which could result in minor personal injury or product or
property damage.
FOR SAFETY: To Identify actions which must be followed for safe operation of equipment:
Report machine damage or faulty operation immediately. Do not use the machine if it is not in proper operating
condition. The following is information that signals some potentially dangerous conditions to the operator or the
equipment. Read this information carefully. Know when these conditions can exist. Locate all safety devices on the
machine. Please take the necessary steps to train the machine operating personnel.
FOR SAFETY:
DO NOT OPERATE MACHINE:
Unless trained and authorized.
Unless Operation Guide is read and understood.
In flammable or explosive areas.
In areas with possible falling objects.
WHEN SERVICING MACHINE:
Avoid moving parts. Do not wear loose clothing, jackets, shirts, or sleeves when working on the machine.
Use only manufacturer approved replacement parts.
8.638-856.0 Manual Operators - Radiant Orbital Scrubber
9
Les symboles ci-dessous sont utilisés à travers ce manuel comme illustré dans leurs descriptions :
Degrés De Risques En Cas De Danger
Il existe trois degrés de risques identifiés par les termes signalétiques -AVERTISSEMENT et ATTENTION et
POUR VOTRE SÉCURITÉ. Le degré de risque est défini de la manière suivante :
AVERTISSEMENT - Dangers ou méthodes dangereuses qui POURRAIENT provoquer de graves blessures
ou entraîner la mort.
ATTENTION - Dangers ou méthodes dangereuses qui pourraient provoquer des blessures légères ou une
détérioration du produit ou des biens immobiliers.
POUR VOTRE SÉCURITÉ: ce signe permet d'identifier les mesures de précaution à prendre pour assurer un bon
fonctionnement du matériel:
Rendre compte immédiatement d'une défaillance ou d'une détérioration de la machine. Ne pas utiliser la machine
si celle-ci ne fonctionne pas correctement. Lire soigneusement les informations ci-dessous signalant certains
dangers potentiels pour l'opérateur de la machine. L'opérateur doit être absolument au courant de ces dangers
potentiels. Localiser tous les dispositifs de sécurité sur la machine. Il est conseillé de prendre les mesures néces-
saires pour former le personnel opérateur.
POUR VOTRE SÉCURITÉ:
NE PAS MANOEUVRER LA MACHINE:
Lorsqu'on n'est pas expérimenté ou qualifié.
Lorsque le guide d'utilisation n'est pas été lu ou compris.
Dans des zones inflammables ou explosives.
Dans des zones où des objets peuvent tomber.
LORS DE L'ENTRETIEN DE LA MACHINE:
Éviter les parties amovibles. Ne pas porter de vêtements amples, tels que des vestes, des chemises ou des
vêtements avec manches lors de l'utilisation de la machine. Utiliser les pièces détachées homologuées.
8.638-856.0 Manual Operators - Radiant Orbital Scrubber
10
Safety Label Location
This drawing indicates the location of safety labels on the Machine. If at any time the labels become illegible,
contact your authorized representative for prompt replacement.
Emplacement De L'étiquette De Sécurité
Ces dessins indiquent l'emplacement des étiquettes de sécurité sur la machine. Si, à tout moment,les étiquettes
deviennent illisibles, contactez votre représentant autorisé pour un remplacement rapide.
8.638-856.0 Manual Operators - Radiant Orbital Scrubber
11
ITEM MEASURE
Motor 1HP, 120V / 60Hz,11amp (60Hz)
RPM 1725 (60Hz)
Base Diameter 17.38“/ 43 cm
Orbital Diameter 3/8” (9.5mm)
Machine Weight 95 Lbs./ 43 kg
Height 48.8” (123.9 cm)
Length 28.19” (71.6cm)
Wheels 10”/25 cm Diameter, Resistant To Chemicals
8.638-856.0 Manual Operators - Radiant Orbital Scrubber
12
Unpacking and Initial Operations
Open the shipping box on both sides, remove the
packaging material and roll the machine out of the box.
Fill the tank with water. You can add a cleaning solution of
your choice in a prescribed mixing ratio.
Pre-Run Inspection
Before each use, inspect the accessory such as the pad
driver for cracks, tears, or excess wear. If the machine or
accessory is dropped, inspect for damage to install an
undamaged accessory. Repair the damaged machine
before the next application.
Tilt the head back and place the foot of the bumper on
the ground.Choose a pad for the appropriate application.
Center the pad on the driver plate.
Position the handle in a lower position.and push slowly
forward until the machine base tilts towards the ground.
Make sure to put the wheels back on the ground in
time to avoid the base from falling on the ground.
This might cause damage!
Assurez-vous de toujours garder les roues arrière
sur le sol, pour éviter que la base ne tombe sur le
sol. Cela pourrait causer des dommages! Check to
make sure the power switch is in the “off” position.
Set the handle position to the desired height by pulling
and releasing the black knob with the left hand. While
holding the black knob out, raise or lower the handle
frame with your right hand.
To fix the handle frame into place, release the black knob
so that it locks firmly into one of the holes.
To turn the machine on, press the power button on the
end of the left handle.
Position “0” is off and position “I” is on.
Make sure a suitable pad or brush is mounted before
starting the machine. The immediate contact of the
floor and driver plate without a pad can lead to
serious damage of the floor and/or the machine.
Assurez-vous qu'une brosse ou un tampon adéquat
est installé avant de démarrer l'appareil. Le contact
immédiat avec la chaussée et la plaque
d'entraînement sans tampon peut provoquer de
graves dommages au sol ou à l'appareil.
8.638-856.0 Manual Operators - Radiant Orbital Scrubber
13
Process of Cleaning
For effective floor cleaning, move the machine forward
and backwards. It is recommended to spray the floor
as you move the machine forward, releasing the spray
button when you move the machine backwards.
To increase the pressure and cleaning effect on certain
floor types like tile and grout, you can lift the machine
frame up, raising the wheels off the ground. When
lifting the wheels off the ground the full weight of the
machine lies on the machine base.
Make sure the surface to be cleaned is not
damaged by the increase in pressure.
Assurez-vous que la surface à nettoyer n'est pas
endommagée par l'augmentation de la pression.
Omit this measure on very sensitive floors.
End of the Application
Turn off the machine by putting the on/off switch to “O”.
If a cleaning solution was used, fill solution tank with
water and spray out system for 30 seconds or drain
using draining port at bottom of tank.
Make sure to not let solution come in contact with
the motor.
Assurez-vous de ne pas laisser la solution entrer
en contact avec le moteur.
8.638-856.0 Manual Operators - Radiant Orbital Scrubber
14
Storage
To avoid damage to the handle frame, DO NOT lay the
machine frame on the floor as done with other
traditional cleaning equipment. Remove the pad from
the driver plate by pulling it down firmly. Put the
machine frame in an upright position by pulling the
black knob with the left hand and move the handle
frame upwards with the right hand. The black knob
should lock firmly in the top hole.
To allow an easy transportation of the machine, remove
the weight kit if used.
Pour transporter facilement l'appareil, enlevez
l'ensemble de poids utilisé.
To easily roll the machine, push your foot on the back
wheel axle to create leverage and pull the handle
towards your body. The machine can be moved similar
to a dolly now.
Always store with the base in the upright position.
8.638-856.0 Manual Operators - Radiant Orbital Scrubber
15
Lifting and Carrying
If you do not have a ramp, we recommend two people
to lift machine in and out of a vehicle. Put the handle
into a firmly locked lower position. Make sure that the
machine base rests on a pad, so that the grip surface
of the driver plate does not get damaged or hooked
onto a carpeted surface.
When lifting the machine in or out of the vehicle, set the
wheels down first, followed by the machine base.
Make sure not to grip too close to the machine
base. If the base should flip upwards it can cause
serious hand injuries.
Veillez à ne pas serrer trop près de la base de
l'appareil,car si la base se retournait vers le haut,
cela pourrait causer des graves blessures à la
main.
Make sure you lift the machine with a back-friendly
posture.
Secure machine firmly so it will not move.
Weight Kit Installation
The total weight of the weight kit is 40 lbs.
Put the weights on top of the mounting plates located
on the sides of the machine base.
Put the four screws into the holes provided on the
weight plates and fasten by turning clockwise.
Once the screws have threaded at least 5 full turns,
tighten the wing nuts by turning them clockwise, until
the weights fit securely to the base.
Make sure that the weights are securely attached to
the base. Loose weights can cause serious
damage.
Assurez-vous que tous les poids sont solidement
attachés à la base. Les poids lâches peuvent
causer de graves dommages.
For storage and transport we recommend removing the
weight kit. The machine can be transported more easily
without the weights.
8.638-856.0 Manual Operators - Radiant Orbital Scrubber
16
Brush Installation
Put the machine base in an upright position, sitting on
the foot of the bumper.
Remove the driver plate by removing the four counter-
sink screws in the center of the plate using an electric
screwdriver.
It is important to only use a Number 3 Phillips head
screwdriver bit. Smaller bit sizes can damage the
screw heads and leave sharp edges, which can tear
or snag the pads.
Il est important de n'utiliser qu'un embout de
tournevis Phillips numéro 3. Des embouts de
tailles inférieures peuvent endommager les têtes
de vis et laisser des arêtes vives, qui peuvent se
déchirer ou accrocher les tampons.
Damaged screws can cause further damage.
Mount the brush with the same countersink screws
used for mounting the driver plates.
NOTE: Tighten the screws sufficiently to avoid
disengagement of the brush from the machine during
operation
To avoid stripping the screws do not over tighten. An
electric screwdriver with a clutch will ensure that
stripping will not occur.
Attaching and Removing the Driver Plates
Put the machine base in an upright position, sitting on
the foot of the bumper. Remove the driver plate by
removing the four countersink screws in the center of
the plate using an electric screwdriver.
Attach a driver plate to the machine base by lining up
the holes of the driver plate with the appropriate
threads of the bearing retainer ring. It is recommended
to align the threads of the bearing horizontally to the
ground.
Put the four countersink screws through the holes of
the driver plate and first screw them into the bearing
retainer ring threads manually. Then, tighten the screws
with an electric screwdriver
8.638-856.0 Manual Operators - Radiant Orbital Scrubber
17
NOTE: Tighten the screws sufficiently to avoid
disengagement of the driver plate from the machine
base during operation.To avoid stripping the screws
do not over tighten. An electric screwdriver with a
clutch will ensure that stripping will not occur.
Accessories And Applications
Never store the accessories in wet conditions.
Keep the accessories away from extreme heat and
from chemicals.
N'entreposez jamais les accessoires dans des
endroits humides. Gardez les accessoires hors de
la chaleur extrême et de produits chimiques.
Driver Plates
Exclusively use designed driver plates only. The
use of other driver plates will damage the machine
and its mechanical action.
Utilisez exclusivement des plaques d'entraînement
de fabricant. L'utilisation d'autres plaques
d'entraînement endommagerait l'appareil et son
action mécanique.
The driver plates are fastened on the machine base
with four countersink screws.
Standard Driver Plate
The standard driver plate (17” in diameter) is supplied.
It is suitable for use with all pads for textile and hard
floor applications. The pads can be easily attached and
removed from the driver disc.
Never put the driver on the carpet without a pad
attached, as this might cause serious damage to
the floor.
Ne placez jamais la partie motrice sur la moquette
sans un tampon, car cela pourrait gravement
endommager le sol.
8.638-856.0 Manual Operators - Radiant Orbital Scrubber
18
Carpet Pads
The beige AgiClean pads are made of a special blend
of fibers and latex that allows the gentle cleaning of
heavily soiled short-pile carpets as well as the
scrubbing of hard floors. Attach the AgiClean pads by
centering them onto the driver plate.
An AgiClean pad, used on both sides, cleans an
approximate area of 1000 -2000 sq. ft (100 to 200m²),
depending on the floor type and level of soil. Rinse the
AgiClean pads after each use with clean water.
Chemical Free Stripping Pad
Chemical Free Stripping Pads are made of a unique
material impregnated with diamonds. They can be
used for deep cleaning and to remove wax off of vinyl,
VCT, linoleum, wood, safety tiles and more.
A Chemical Free Stripping Pad, used on both sides,
cleans an approximate area of 1000-2000 sq. ft (100 to
200m²), depending on the floor type and the level of
wax and soil. Make sure to thoroughly rinse the
Chemical Free Stripping Pad with clean water after
each use.
Scrub Brush
The bristles of the brush are made of high quality
nylon. The unique brush design is ideal for cleaning tile
and grout, smooth concrete, rubber flooring, and micro-
porous surfaces such as porcelain and safety tiles. It
can also be used for any other hard surfaces.
Concrete Brush
Our concrete brush is designed for outside concrete
and other rough surfaces. It is great for cleaning
walkways with minimal water.
Never use the concrete brush on any other floor
other than the specified outside concrete or rough
surfaces, as this brush will cause serious damage
to all other flooring.
N'utilisez jamais la brosse en béton sur un autre
type de sol que le béton ou que les surfaces
rugueuses extérieures précisées, car cette brosse
pourrait causer de graves dommages à tous les
autres revêtements de sol.
8.638-856.0 Manual Operators - Radiant Orbital Scrubber
19
Superzorb Pad
Our exclusive, highly absorbent cotton-polyester blend
pads are specifically designed for the Radiant.
Thoroughly remove moisture, soil, and lift carpet pile
allowing faster dry times.
A SuperZorb Pad, used on both sides, cleans an
approximate area of 3000 sq. ft (280m²), depending on
floor type and level of soil. SuperZorb Pads are
machine washable and can be reused hundreds of
times.
The use of the multi-purpose brush may splash in
certain applications. Take appropriate measures or
use a splash guard to prevent the wetting of walls
and other obstacles.
Dans le cadre de certaines applications,
l'utilisation de la brosse à usages multiples peut
éclabousser. Prenez les mesures appropriées ou
utilisez le pare-éclaboussures si nécessaire pour
empêcher de mouiller les murs et d'autres
obstacles
Rinse the brush as needed with clean water after each
use. Depending on usage and care, you can use the
multipurpose brush for many years.
NOTE: ON STORAGE: Never store the multi-purpose
brush with the bristles down. This can deform the
bristles, damage the brush and reduce the cleaning
performance.
You can bring deformed bristles back into their original
form by heating them with a heat gun.
Application On Different Floor Types
Carpet Cleaning
Vacuum the carpet thoroughly before cleaning. Large
dirt particles are removed, allowing the application to be
more effective.
Apply solution as you move forward. The carpet should
be cleaned by going forward and backwards two to three
times, while applying solution on the first pass in order to
keep the drying time low. Depending on the level of soil
and the nature of the carpet, this process can be
shortened or extended. As required, carpets can be
vacuumed again after cleaning.
8.638-856.0 Manual Operators - Radiant Orbital Scrubber
20
Cleaning Hard Floors
Remove dust and coarse dirt from the surface before
cleaning. Choose a suitable pad according to the
application. Place the pad in the center of the driver.
Gently lower the head on to the floor. Surface can be
cleaned by moving forward and backwards two to and
adding water. Use a cleaning solution as needed.
Depending on the soil contamination and the floor type,
this process can be shortened or extended.
8.638-856.0 Manual Operators - Radiant Orbital Scrubber
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36

Windsor Radiant with ORB Technology Le manuel du propriétaire

Catégorie
Machine à plancher
Taper
Le manuel du propriétaire

dans d''autres langues