Sauder 412314 Assembly Instructions Manual

NOTE

register your new purchase online

www.sauder.com

For immediate service,

our website is available

24 hours a day, 7 days a week

to order replacement parts,

access assembly tips,

register your product,

and view Sauder products.

Mon-Fri - 9am-5:30pm ET

United States and Canada (except holidays)

Consumer Services 1-800-523-3987

DO NOT RETURN YOUR UNIT

TO THE STORE

Contact us ﬁ rst

Most replacement parts ship from our

facility in one or two business days.

www.sauder.com

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.

PLEASE READ AND KEEP FOR FUTURE REFERENCE.

The back pages of this book are French instructions.

Les pages de arrière de ce livre sont des instructions

françaises.

Record the date you purchased this unit and save the booklet for

future reference.

If you ever need to contact Sauder about this unit, refer to the lot #

and the model # when calling our toll-free number. For more

information about our furniture, company, or to order replacement

parts, please visit our web site.

05 / 16 / 13

Lot #: 353310

Date Purchased: ____________

Corner Computer Desk

Model # 412314

Assembly Instructions

PARTS IDENTIFICATION

While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help

distinguish similar parts from each other. Use this

PARTS IDENTIFICATION

to help identify similar parts.

ITEM DESCRIPTION QTY

A END 2

B RIGHT UPRIGHT 1

C LEFT UPRIGHT 1

D TOP 1

E SHELF 2

F BACK 2

G RIGHT FRONT LEG 1

H LEFT FRONT LEG 1

I RIGHT REAR LEG 1

J LEFT REAR LEG 1

K KEYBOARD FRONT 1

L KEYBOARD BACK 1

M KEYBOARD SIDE 2

N KEYBOARD SHELF 1

O DRAWER UPRIGHT 2

P SHELF MOLDING 2

412314

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

P

A

F

E

M

O

P

HARDWARE IDENTIFICATION

412314

HIDDEN CAM - 31 CAM SCREW - 16 CAM DOWEL - 15

HINGE - 2 KNOB - 1 CAM COVER - 4

U2 V2 W2

X Y Z

35GA

CABINET RIGHT - 1

35GB

CABINET LEFT - 1

35GC

DRAWER RIGHT - 1

35GD

DRAWER LEFT - 1

SCREWS SHOWN ACTUAL SIZE

Using a SCREW that is too long will caus

e

d

a

mage. Before beginning assembly, separate

each type of SCREW. Carefully study the SCREW diagrams below

(

(SHOWN ACTUAL SIZE

)

.

Pay close attention to the color of each SCREW. You may receive extra hardware with your unit.

HAMMER

1

TIP SHOWN ACTUAL SIZE

NO. 2 PHILLIPS SCREWDRIVER

ASSEMBLY TOOLS REQUIRED

GG

412314

BLACK 1-7/8” FLAT HEAD SCREW - 8 BROWN 1-1/2” FLAT HEAD SCREW - 4

GOLD 5/16” FLAT HEAD SCREW - 8

BLACK 1-1/4” FLAT HEAD SCREW - 2 BLACK 7/8” MACHINE SCREW - 1

SILVER 5/8” FLAT HEAD SCREW - 4 SILVER 9/16” LARGE HEAD SCREW - 2

AA BB

CC DD

EE FF

www.sauder.com/services

2

Look for this icon. It means a video assembly tip is available at:

www.sauder.com/services/tips

412314



Push thirty-one HIDDEN CAMS (U2) into the ENDS (A), UPRIGHTS (B and C), SHELVES (E), BACKS (F), DRAWER

UPRIGHTS (O), and SHELF MOLDINGS (P). Then insert the metal end of fifteen CAM DOWELS (W2) into the HIDDEN CAMS. 

(15 used)

Arrow

Do not tighten the HIDDEN CAMS in this step.

Arrow

B

C

O

U2

W2

(31 used)

E

F

E

P

Do not insert CAM

DOWELS into these parts.

Do not insert CAM DOWELS

into these HIDDEN CAMS.

A

U2

www.sauder.com/services

3

412314

(16 used)

 Turn sixteen CAM SCREWS (V2) into the LEGS (G, H, I, and J).

G

H

I

J

V2

www.sauder.com/services

4

412314

 Fasten the CABINET RIGHT (35GA) and CABINET LEFT (35GB) to the DRAWER UPRIGHTS (O). Use four GOLD

5/16” FLAT HEAD SCREWS (GG) through holes #1 and #3.

1

2

3

1

2

3

Roller End

O

GOLD 5/16” FLAT HEAD SCREW

(4 used in this step)

GG

Use second hole

www.sauder.com/services

5

Edge with CAM

DOWELS

412314

 Fasten the LEGS (G, H, I, and J) to the ENDS (A) and SHELF MOLDINGS (P). Tighten eight HIDDEN CAMS.

A

P

A

P

G

H

I

J

Surface with

HIDDEN CAMS

Surface with

HIDDEN CAMS

Surface with

HIDDEN CAMS

Surface with

HIDDEN CAMS

Edge with CAM

DOWELS

www.sauder.com/services

6

412314

G

H

I

J

E

F

E

 Fasten the SHELVES (E) and BACKS (F) to the LEGS (G, H, I, and J). Tighten eight HIDDEN CAMS.

Unﬁ nished

surface

Unﬁ nished

surface

Surface with

HIDDEN CAMS

412314

www.sauder.com/services

7

 Fasten the LEFT UPRIGHT (C) to the RIGHT UPRIGHT (B). Tighten three HIDDEN CAMS.

B

C

Unﬁ nished

surface

Unﬁ nished

surface

Finished

edge

Caution

Risk of damage or

injury. Hidden Cams

must be completely

tightened. Hidden

Cams that are not

completely tightened

may loosen, and parts

may separate.

To completely tighten:

Start Tighten

Arrow

Maximum

210 degrees

Minimum

190 degrees

www.sauder.com/services

8

412314

 Fasten the UPRIGHTS (B and C) to the TOP (D). Tighten four HIDDEN CAMS.

B

C

D

Unﬁ nished

surface

Short unﬁ nished edge

Maximum

210 degrees

Minimum

190 degrees

Arrow

www.sauder.com/services

9

412314

 Fasten the SHELVES (E) and BACKS (F) to the UPRIGHTS (B and C). Use eight BLACK 1-7/8” FLAT HEAD

SCREWS (AA).

 Fasten the ENDS (A) to the TOP (D). Tighten four HIDDEN CAMS.

Maximum

210 degrees

Minimum

190 degrees

Arrow

B

C

E

FF

E

A

AA

BLACK 1-7/8” FLAT HEAD SCREW

(8 used in this step)

D

G

H

I

J

www.sauder.com/services

10

412314

 Fasten the DRAWER UPRIGHTS (O) to the TOP (D). Tighten four HIDDEN CAMS.

B

C

D

G

H

O

Roller End

Maximum

210 degrees

Minimum

190 degrees

Arrow

www.sauder.com/services

11

412314



Fasten the KEYBOARD SIDES (M) to the KEYBOARD SHELF (N). Use two BROWN 1-1/2” FLAT HEAD SCREWS (BB).



Fasten the KEYBOARD SIDES (M) to the KEYBOARD BACK (L). Use two BROWN 1-1/2” FLAT HEAD SCREWS (BB).

 Fasten the KEYBOARD BACK (L) to the KEYBOARD SHELF (N). Use two BLACK 1-1/4” FLAT HEAD SCREWS (CC).

BROWN 1-1/2” FLAT HEAD SCREW

(4 used in this step)

BB

BLACK 1-1/4” FLAT HEAD SCREW

(2 used in this step)

CC

L

M

N

M

Finished

surface

Finished

surface

Long ﬁ nished edge

www.sauder.com/services

12

412314

 Fasten two HINGES (X) to the KEYBOARD FRONT (K). Use four SILVER 5/8” FLAT HEAD SCREWS (EE).



Fasten the HINGES (X) to the KEYBOARD SHELF (N). Use two SILVER 9/16” LARGE HEAD SCREWS (FF).

N

K

SILVER 5/8” FLAT HEAD SCREW

(4 used in this step)

EE

SILVER 9/16” LARGE HEAD SCREW

(2 used in this step)

FF

X

www.sauder.com/services

13

412314

 Fasten the DRAWER RIGHT (35GC) and DRAWER LEFT (35GD) to the KEYBOARD SIDES (M). Use four GOLD 5/16”

FLAT HEAD SCREWS (GG) through holes #1 and #3.

 Fasten a KNOB (Y) to the KEYBOARD FRONT (K). Use a BLACK 7/8" MACHINE SCREW (DD).

M

K

Y

GOLD 5/16” FLAT HEAD SCREW

(4 used for the SLIDES)

GG

BLACK 7/8” MACHINE SCREW

(1 used for the KNOB)

DD

1

2

3

1

2

3

Roller End

www.sauder.com/services

14

412314

 Carefully stand your unit upright.

 To insert the keyboard shelf into your unit, tip the front of the shelf down and drop the rollers on the shelf behind the rollers

on the unit. Lift the front of the shelf up and slide it into the unit.

 To make adjustments to the KEYBOARD FRONT (K), loosen the SCREWS in the HINGES, make needed adjustments, and

tighten the SCREWS.

K

www.sauder.com/services

15

412314

(4 used)

To cover

HIDDEN CAMS

 Push a CAM COVER (Z) onto each visible HIDDEN CAM

NOTE: Please read the next two pages for important warranty and safety information.

This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.

Z

50 lbs.

20 lbs.

25 lbs.

www.sauder.com/services

1. Sauder Woodworking Co. (Sauder®) provides limited warranty coverage to the original purchaser of this product for a

period of ﬁ ve years from the date of purchase against defects in materials or workmanship of Sauder furniture components. As

used in this Warranty, “defect” means imperfections in components which substantially impair the utility of the product. This

Warranty gives you speciﬁ c legal rights, and you may also have other rights which vary from state to state.

2. There is no warranty coverage for defects or conditions that result from the failure to follow product assembly instructions,

information or warnings, misuse or abuse, intentional damage, ﬁ re, ﬂ ood, alteration or modiﬁ cation of the product, or use

of the product in a manner inconsistent with its intended use, nor any condition resulting from incorrect or inadequate

maintenance, cleaning, or care. There is also no warranty coverage for rented products or any products purchased “used” or

“as is”, at a distress or going-out-of business sale, or from a liquidator.

3. As the exclusive remedy under this Warranty, Sauder will (at its sole option) repair or replace any defective furniture

component. Sauder may require independent conﬁ rmation of the claimed defect and proof of purchase. Replacement parts

will be warranted for only the remaining period of the original Warranty. SAUDER SHALL HAVE NO LIABILITY for ANY

INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND and all such damages are EXCLUDED FROM THIS

WARRANTY, such as loss of use, disassembly, transportation, labor or damage to property on or near the product. Some states

do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not

apply to you.

4. This Warranty applies only to warranted defects that ﬁ rst arise and are reported to Sauder within the warranty coverage

period. The Warranty cannot be transferred to subsequent owners or users of the product, and it shall be immediately void in

the event the product is resold, transferred, leased or rented to any third party or person other than the original purchaser.

5.

THERE ARE NO OTHER WARRANTIES APPLICABLE TO THIS PRODUCT. Under the laws of certain states, there

may be no implied warranties from Sauder and all implied warranties, INCLUDING ANY IMPLIED WARRANTY OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE are disclaimed where allowed by law. TO THE

EXTENT ANY IMPLIED WARRANTIES ARE APPLICABLE, ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED

WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO

THE DURATION OF THIS EXPRESS WARRANTY or the minimum period allowed by law, whichever is shorter. Some states

do not allow limitations on how long an implied Warranty lasts, so the above limitation may not apply to you.

6. For Warranty inquiries or claims, please visit our website www.sauder.com. You can also contact Sauder at

1-800-523-3987. Sauder may require Warranty claims to be submitted in writing to Sauder Woodworking Co., 502 Middle

Street, Archbold, OH 43502 USA. Please include your sales receipt or other proof of purchase and a speciﬁ c description of

the product defect.

5-YEAR LIMITED WARRANTY

412314

WARNING

Please use your furniture correctly and safely. Improper use can cause safety hazards,

or damage to your furniture or household items. Carefully read the following chart.

Look out for: What can happen: How to avoid the problem:

• Overloaded shelves and drawers.

• Improper loading can cause the product

to be top-heavy.

• Risk of injury.

• Top-heavy furniture can tip over.

• Overloaded shelves and drawers can

break.

• Never exceed the weight limits shown in

the instructions.

• Work from bottom to top when loading

shelves and drawers. Place the heavier

items on the lower shelves or in lower

drawers.

• Improperly moving furniture that is not

designed and equipped with casters.

• Furniture can tip over or break if

improperly moved.

• Physical injury. Furniture can be very

heavy.

• Breakage of tops - particularly with

double pedestal furniture (drawers at both

ends).

• Unload shelves and drawers from top to

bottom before moving the unit.

• Do not push furniture, especially on a

carpeted ﬂ oor. Have a friend help you lift

the item and set it in place.

• Provide support to the center section of

the top when lifting the furniture.

• Placing TVs on furniture items that are

not designed to support a television is

hazardous.

• Risk of injury or death. TVs can be

very heavy. Plus the weight and location

of the picture tube tends to make TVs

unbalanced and prone to tipping forward.

• This product is not designed to support a

television.

La page charge ...

Sauder 412314 Assembly Instructions Manual

Sauder 412314 Assembly Instructions Manual

dans d''autres langues

Documents connexes