YORKVILLE LP-LED4X Manuel utilisateur

Catégorie
Équipement musical supplémentaire
Taper
Manuel utilisateur

Ce manuel convient également à

SERVICE MANUAL
LP-LED2X & LPLED4X
SMT Disclaimer
Due to the complex nature of the use of SMT installed components
in Yorkville equipment, we highly caution all service technicians in
attempting to repair or replace SMT factory installed components.
Many of these components may be glued prior to initial soldering.
Replacing SMT components requires expensive
specialized de-soldering equipment and training.
Yorkville Sound will repair and replace defective SMT components
to ensure proper quality assurance and installation is maintained.
U.S.A.
Yorkville Sound Inc.
4625 Witmer Industrial Estate
Niagara Falls, New York
14305, USA
Voice: 716-297-2920
Fax: 716-297-3689
WORLD HEADQUARTERS
CANADA
Yorkville Sound Limited
550 Granite Court
Pickering, Ontario
L1W 3Y8 CANADA
Voice: 905-837-8481
Fax: 905-837-8746
0DQXDO6HUYLFH/3/('B;YÜ-DQ

The exclamation point within an equilatereal triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
Le point d’exclamation à l’intérieur d’un triangle équilatéral est prévu pour alerter
l’utilisateur de la présence d’instructions importantes dans la littérature accompagnant
l’appareil en ce qui concerne l’opération et la maintenance de cet appareil.
This lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s enclosure that may be
of sufficient magnitude to constitute a risk of electric shock to persons.
Ce symbole d’éclair avec tête de flèche dans un triangle équilatéral est prévu pour alerter
l’utilisateur de la présence d’un «voltage dangereux» non-isolé à proximité de l’enceinte du
produit qui pourrait être d’ampleur suffisante pour présenter un risque de choque électrique.
DOC-Safety-5v0+UL60065-00-1v8 • February 24, 2020
Instructions pertaining to a risk of fire, electric shock, or injury to a person
Read Instructions: The Owner’s Manual should be read and understood before operation of your unit. Please, save these
instructions for future reference and heed all warnings.
Clean only with dry cloth.
Packaging: Keep the box and packaging materials, in case the unit needs to be returned for service.
Warning: To reduce the risk or fire or electric shock, do not expose this apparatus to rain or moisture. Do not
use this apparatus near water!
Warning: When using electric products, basic precautions should always be followed, including the following:
Power Sources
Your unit should be connected to a power source only of the voltage specified in the owners manual or as marked on the
unit. This unit has a polarized plug. Do not use with an extension cord or receptacle unless the plug can be fully inserted.
Precautions should be taken so that the grounding scheme on the unit is not defeated. An apparatus with CLASS I
construction shall be connected to a Mains socket outlet with a protective earthing connection. Where the MAINS plug or
an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
Hazards
Do not place this product on an unstable cart, stand, tripod, bracket or table. The product may fall, causing serious personal
injury and serious damage to the product. Use only with cart, stand, tripod, bracket, or table recommended by the
manufacturer or sold with the product. Follow the manufacturer’s instructions when installing the product and use mounting
accessories recommended by the manufacturer. Only use attachments/accessories specified by the manufacturer
Note: Prolonged use of headphones at a high volume may cause health damage on your ears.
The apparatus should not be exposed to dripping or splashing water; no objects filled with liquids should be
placed on the apparatus.
Terminals marked with the “lightning bolt” are hazardous live; the external wiring connected to these terminals require
installation by an instructed person or the use of ready made leads or cords.
Ensure that proper ventilation is provided around the appliance. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
No naked flame sources, such as lighted candles, should be placed on the apparatus.
Power Cord
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided
for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
The AC supply cord should be routed so that it is unlikely that it will be damaged. Protect the power cord from being walked on
or pinched particularly at plugs. If the AC supply cord is damaged DO NOT OPERATE THE UNIT. To completely disconnect
this apparatus from the AC Mains, disconnect the power supply cord plug from the AC receptacle. The mains plug of the
power supply cord shall remain readily operable.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Service
The unit should be serviced only by qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally,
or has been dropped. Disconnect power before servicing!
Instructions relatives au risque de feu, choc électrique, ou blessures aux personnes
Veuillez Lire le Manuel: Il contient des informations qui devraient êtres comprises avant l’opération de votre appareil.
Conservez. Gardez S.V.P. ces instructions pour consultations ultérieures et observez tous les avertissements.
Nettoyez seulement avec le tissu sec.
Emballage: Conservez la boite au cas ou l’appareil devait être retourner pour réparation.
Avertissement: Pour réduire le risque de feu ou la décharge électrique, n'exposez pas cet appareil à la pluie ou à l'humidité.
N’utilisez pas cet appareil près de l’eau!
Attention: Lors de l’utilisation de produits électrique, assurez-vous d’adhérer à des précautions de bases incluant celle qui suivent:
Alimentation - L’appareil ne doit être branché qu’à une source d’alimentation correspondant au voltage spécifié dans
le manuel ou tel qu’indiqué sur l’appareil. Cet appareil est équipé d’une prise d’alimentation polarisée. Ne pas utiliser cet
appareil avec un cordon de raccordement à moins qu’il soit possible d’insérer complètement les trois lames. Des précautions
doivent êtres prises afin d’eviter que le système de mise à la terre de l’appareil ne soit désengagé. Un appareil construit
selon les normes de CLASS I devrait être raccordé à une prise murale d’alimentation avec connexion intacte de mise à la
masse. Lorsqu’une prise de branchement ou un coupleur d'appareils est utilisée comme dispositif de débranchement, ce
dispositif de débranchement devra demeurer pleinement fonctionnel avec raccordement à la masse.
Risque - Ne pas placer cet appareil sur un chariot, un support, un trépied ou une table instables. L’appareil pourrait tomber et
blesser quelqu’un ou subir des dommages importants. Utiliser seulement un chariot, un support, un trépied ou une table
recommandés par le fabricant ou vendus avec le produit. Suivre les instructions du fabricant pour installer l’appareil et utiliser les
accessoires recommandés par le fabricant. Utilisez seulement les attachements/accessoires indiqués par le fabricant.
Note: L'utilisation prolongée des écouteurs à un volume élevé peut avoir des conséquences néfastes sur la santé
sur vos oreilles.
Il convient de ne pas placer sur l’appareil de sources de flammes nues, telles que des bougies allumées.
L’appeil ne doit pas être exposé à des égouttements d’eau ou des éclaboussures et qu’aucun objet rempli de liquide tel
que des vases ne doit être placé sur l’appareil.
Assurez que lappareil est fourni de la propre ventilation. Ne procédez pas à l’installation près de source de chaleur tels
que radiateurs, registre de chaleur, fours ou autres appareils (incluant les amplificateurs) qui produisent de la chaleur.
Les dispositifs marqués d’une symbole “d’éclair” sont des parties dangereuses au toucher et que les câblages
extérieurs connectés à ces dispositifs de connection extérieure doivent être effectivés par un opérateur formé ou en
utilisant des cordons déjà préparés.
Cordon d’Alimentation - Ne pas enlever le dispositif de sécurité sur la prise polarisée ou la prise avec tige de
mise à la masse du cordon d’alimentation. Une prise polarisée dispose de deux lames dont une plus large que l’autre. Une
prise avec tige de mise à la masse dispose de deux lames en plus d’une troisième tige qui connecte à la masse. La lame plus
large ou la tige de mise à la masse est prévu pour votre sécurité. La prise murale est désuète si elle n’est pas conçue pour
accepter ce type de prise avec dispositif de sécurité. Dans ce cas, contactez un électricien pour faire remplacer la prise murale.
Évitez d’endommager le cordon d’alimentation. Protégez le cordon d’alimentation. Assurez-vous qu’on ne marche pas dessus
et qu’on ne le pince pas en particulier aux prises. N’UTILISEZ PAS L’APPAREIL si le cordon d’alimentation est endommagé.
Pour débrancher complètement cet appareil de l’alimentation CA principale, déconnectez le cordon d’alimentation de la prise
d’alimentation murale. Le cordon d’alimentation du bloc d’alimentation de l’appareil doit demeurer pleinement fonctionnel.
Débranchez cet appareil durant les orages ou si inutilisé pendant de longues périodes.
Service - Consultez un technicien qualifié pour l’entretien de votre appareil. L'entretien est nécessaire quand l'appareil a été
endommagé de quelque façon que se soit. Par exemple si le cordon d’alimentation ou la prise du cordon sont endommagés, si il y
a eu du liquide qui a été renversé à l’intérieur ou des objets sont tombés dans l'appareil, si l'appareil a été exposé à la pluie ou à
l'humidité, si il ne fonctionne pas normalement, ou a été échappé. Débrancher l’appareil avant d’enlever les couvercles!
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
FOLLOW ALL INSTRUCTIONS SUIVEZ TOUTES LES INSTRUCTIONS
AVIS: AFIN DE REDUIRE LES RISQUE DE CHOC ELECTRIQUE, N’ENLEVEZ PAS LE COUVERT (OU
LE PANNEAU ARRIERE) NE CONTIENT AUCUNE PIECE REPARABLE PAR L’UTILISATEUR.
CONSULTEZ UN TECHNICIEN QUALIFIE POUR L’ENTRETIENT CE PRODUIT EST POUR L’USAGE À
L’INTÉREUR SEULEMENT. LES PACKS BATTERIES INSTALLÉS NE DOIVENT PAS ÊTRE EXPOSÉS
À UNE CHALEUR EXCESSIVE TELLE QUE LE ENSOLEILLEMENT, LE FEU OU SIMILAIRES.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL. THIS DEVICE IS FOR INDOOR USE ONLY!
INSTALLED BATTERY PACKS SHALL NOT BE EXPOSED TO EXCESSIVE HEAT
SUCH AS SUNSHINE, FIRE OR THE LIKE.
SEPARATE
COLLECTION
WEEE
DO NOT
PUSH OR PULL
The Lightning Flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product enclosure that may be of sufficient magnitude to constitute a risk of shock to persons
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the product
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The wide blade or the third prongs are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit
from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
WARNING:
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture and objects filled with liquids, such as vases, should not be
placed on this apparatus.
To completely disconnect this apparatus from the ac mains, disconnect the power supply cord plug from the ac receptacle.
The mains plug of the power supply cord or appliance coupler shall remain readily accessible.
Le symbole représentant un éclair avec une flèche à l’intérieur d’un triangle équilatéral est utilisé pour prévenir l’utilisateur de la
présence d’une tension électrique dangereuse non isolée à l’intérieur de l’appareil. Cette tension est d’un niveau suffisamment
élevé pour représenter un risque d’électrocution
Le symbole représentant un point d’exclamation à l’intérieur d’un triangle équilatéral, signale à l’utilisateur la présence d’instructions
importantes relatives au fonctionnement et à l’entretien de l’appareil dans cette notice d’installation
1. Lisez ces instructions.
2. Conservez ces instructions.
3. Respecter tous les avertissements.
4. Suivez toutes les instructions.
5. N'utilisez pas l'appareil près de l'eau.
6. Nettoyer uniquement avec chiffon sec.
7. Ne bloquez pas les ouvertures de ventilation. Installer en suivant les instructions du fabricant.
8. Ne pas installer près des sources de chaleur telles que radiateurs, bouches de chaleur, four ou autres appareils (y compris les amplificateurs)
produisant de la chaleur.
9. N'annulez pas l'objectif sécuritaire de la fiche polarisée ou de la tige de mise à la terre. Une fiche polarisée possède deux lames avec une plus
large que l'autre. Une prise avec mise à la terre possède deux lames et une troisième tige. La lame large ou la troisième tige sont fournis pour
votre sécurité. Si la fiche n'entre pas dans votre prise, consultez un électricien pour remplacer la prise obsolète.
10. Protéger le cordon d'alimentation des piétinements ou pincements en particulier près des fiches, des prises de courant et au point de
sortie de l'appareil.
11. Utilisez uniquement les accessoires spécifiés par le fabricant.
12. Utiliser uniquement avec un charriot, stand, trépied ou une table spécifiée par le fabricant, ou vendus avec l'appareil.
13. Débranchez l'appareil durant un orage ou lorsqu'il reste inutilisé pendant de longues périodes de temps.
14. Confiez toute réparation à un technicien qualifié. Une réparation est nécessaire lorsque l'appareil a été endommagé de quelque façon que ce
soit; comme lorsque le cordon d'alimentation ou la fiche est endommagé, lorsque du liquide a été renversé ou des objets sont tombés à l'intérieur,
lorsque l'appareil a été exposé à la pluie ou l'humidité, ne fonctionne pas normalement, ou est tombé.
AVERTISSEMENT:
• Pour réduire les risques d'incendie ou de choc électrique, ne pas exposer cet appareil à la pluie ou à l'humidité et ne placez pas d’objets contenant
des liquides, tels que des vases, sur l’appareil.
• Pour isoler totalement cet appareil de l'alimentation secteur, débranchez totalement son cordon d'alimentation du réceptacle CA.
• La prise du cordon d’alimentation ou du prolongateur, si vous en utilisez un comme dispositif de débranchement, doit rester facilement accessible
CAUTION
TO PREVENT ELECTRIC SHOCK HAZARD,
DO NOT CONNECT TO MAINS POWER SUPPLY
WHILE GRILLE IS REMOVED.
AVIS
POUR PRÉVENIR LES RISQUES D'ÉLECTROCUTION,
NE PAS RACCORDER A L’ALIMENTATION ÉLECTRIQUE ALORS
QUE LA GRILLE EST RETIRÉE.
The DO NOT STACK symbol is intended to alert the user that the product
shall not be vertically stacked because of the nature of the product.
La symbole NE PAS EMPILER est pour alerter l'utilisateur que le produit
ne doit pas être empilé verticalement en raison de la nature du produit.
NOT TO BE SERVICED
BY USERS
CAUTION: HOT SURFACE
ATTENTION: SURFACE CHAUDE
IEC 60417-5041
100-240V 1.2-0.5A 50/60 Hz
Off Off
1 2
Lamp Color
FunctionBrightness
Min Max
DESIGNED & MANUFACTURED BY
YORKVILLE SOUND • TORONTO, CANADA
LP-LED2X REV2
A-Z1727R / 1v4
Serial Number
Audio IN
Channel
Assign
Ch 1,2
Ch 3,4
Pwr
FOR CONNECTING TO A
YORKVILLE CONTROLLER
• DO NOT CONNECT TO DMX •
INOUT
Bluetooth
TM
SMART
Stage Lighting Lightbar
LP- LED2X
Contains Transmitter Module FCC ID: WAP2011
Contains Transmitter Module ID: 7922A-2011
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
DRY LOCATIONS ONLY
POUR EMPLACEMENTS
SECS SOULEMENT
DISCONNECT POWER
BEFORE SERVICING!
DEBRANCHER L’APPAREIL AVANT
D’ENLEVER LES COUVERCLES!
NOT FOR RESIDENTIAL USE
PAS POUR USAGE RÉSIDENTIEL
LR1004
Yorkville
YS#10000
YS#10001
Mode Address
1
2
3
4
5
6
7
8
9
10
11
12
DMX OUTDMX IN
DMX
ON
YS#9028
SEE OWNERS MANUAL FOR
CASCADE INSTALLATION
100-240V 1.2-0.5A 50/60 Hz
100-240V 6.8-2.8A
680W MAX on first outlet
8.0-3.2A 920W MAX WITH AC OUTLET
Off Off
1 2
Lamp Color
FunctionBrightness
Min Max
DESIGNED & MANUFACTURED BY
YORKVILLE SOUND • TORONTO, CANADA
LP-LED2X REV2
A-Z1820R / 3v0
Serial Number
Audio IN
Channel
Assign
Ch 1,2
Ch 3,4
Pwr
FOR CONNECTING TO A
YORKVILLE CONTROLLER
• DO NOT CONNECT TO DMX •
INOUT
Bluetooth
TM
SMART
Stage Lighting Lightbar
LP- LED2X
Contains Transmitter Module FCC ID: WAP2011
Contains Transmitter Module ID: 7922A-2011
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
DRY LOCATIONS ONLY
POUR EMPLACEMENTS
SECS SOULEMENT
DISCONNECT POWER
BEFORE SERVICING!
DEBRANCHER L’APPAREIL AVANT
D’ENLEVER LES COUVERCLES!
NOT FOR RESIDENTIAL USE
PAS POUR USAGE RÉSIDENTIEL
120W MAX STANDALONE
LR1004
Yorkville
YS#10000
YS#10001
Mode Address
1
2
3
4
5
6
7
8
9
10
11
12
DMX OUTDMX IN
DMX
ON
YS#9028
DRY LOCATIONS ONLY
POUR EMPLACEMENTS
SECS SOULEMENT
100-240V 2.4-1.0A 50/60 Hz
Audio IN
FOR CONNECTING TO A
YORKVILLE CONTROLLER
• DO NOT CONNECT TO DMX •
1 2 3 4
Pwr
Lamp Color
Off Off Off Off
FunctionBrightness
Min
Mode Address
1
2
3
4
5
6
7
8
9
10
11
12
Max
DMX OUTDMX IN
OUT IN
DESIGNED & MANUFACTURED BY
YORKVILLE SOUND • TORONTO, CANADA
DMX
ON
LP-LED4X REV2 A-Z1680R / 2v1
Serial Number
Bluetooth
TM
SMART
Stage Lighting Lightbar
LP- LED4X
Contains Transmitter Module FCC ID: WAP2011
Contains Transmitter Module ID: 7922A-2011
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
DISCONNECT POWER
BEFORE SERVICING!
DEBRANCHER L’APPAREIL AVANT
D’ENLEVER LES COUVERCLES!
NOT FOR RESIDENTIAL USE
PAS POUR USAGE RÉSIDENTIEL
Yorkville
YS#10000
YS#10001
YS#9028
LR1004
SEE OWNERS MANUAL FOR
CASCADE INSTALLATION
DRY LOCATIONS ONLY
POUR EMPLACEMENTS
SECS SOULEMENT
100-240V 2.4-1.0A 50/60 Hz 100-240V 5.6-2.3A
560W MAX on first outlet
8.0-3.2A 920W MAX WITH AC OUTLET
Audio IN
FOR CONNECTING TO A
YORKVILLE CONTROLLER
• DO NOT CONNECT TO DMX •
1 2 3 4
Pwr
Lamp Color
Off Off Off Off
FunctionBrightness
Min
Mode Address
1
2
3
4
5
6
7
8
9
10
11
12
Max
DMX OUTDMX IN
OUT IN
DESIGNED & MANUFACTURED BY
YORKVILLE SOUND • TORONTO, CANADA
DMX
ON
LP-LED4X REV2 A-Z1821R / 3v0
Serial Number
Bluetooth
TM
SMART
Stage Lighting Lightbar
LP- LED4X
Contains Transmitter Module FCC ID: WAP2011
Contains Transmitter Module ID: 7922A-2011
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
DISCONNECT POWER
BEFORE SERVICING!
DEBRANCHER L’APPAREIL AVANT
D’ENLEVER LES COUVERCLES!
NOT FOR RESIDENTIAL USE
PAS POUR USAGE RÉSIDENTIEL
240W MAX STANDALONE
Yorkville
YS#10000
YS#10001
YS#9028
LR1004
Max AC In
ut Volta
e
100-240VAC 50/60 Hz
Power Consum
p
tion LEDs
14 watts per LED (4 LEDs, 56 watts per pod)
Power Consum
p
tion LP-LED2X: 120VA, 1.0A
@
120VAC Nominal
LP-LED4X: 240VA, 2.0A
@
120VAC Nominal
Stand Mount Size
1 3/8 inch Round
Controller Cable
Yorkville: Standard Shielded 3-pin XLR Cable
Other
DMX: Standard Shielded 3-pin XLR Cable
Dimensions
(
LWH
)
LP-LED2X: 24 x 4.8 x 8 inches
(
61 x 12.25 x 20.4 cm
)
LP-LED4X: 31 x 4.8 x 8 inches
(
78.8 x 12.25 x 20.4 cm
)
Wei
g
h
t
LP-LED2X: 9.5 lbs
(
4.3 k
g)
LP-LED4
X
:14.6 lbs
(
6.6 k
g)
Specifications
Spécifications
Tension CA d’entrée Maximum 100-240VCA 50/60 Hz
Consommation de Puissance des DEL 14 watts par DEL, 4 DEL par unité, 56 watts total
Consommation de Puissance des DEL 270 Watts
Taille montage sur support 1 pouce 3/8, Rond
Câble de raccordement pour contrôleur Câble Blindé Standard avec prise XLR 3 tiges
Autre Module DMX Optionnel
Dimensions (LPH)
LP-LED2X: 24 x 4.8 x 8
p
ouce
(
61 x 12.25 x 20.4 cm
)
LP-LED4X: 31 x 4.8 x 8
p
ouce
(
78.8 x 12.25 x 20.4 cm
)
Poids
LP-LED2X: 9.5 lbs
(
4.3 k
g)
LP-LED4
X
:14.6 lbs
(
6.6 k
g)
M1486 Parts Reference List 11/1/2018
REF YS # Description REF YS #
Description REF YS # Description REF
YS # Description
C1
7734 __1U0 50V 10%CAP 1206 SMT CER
R47
7861 W125 10K 5% 0805 SMT RES
R29
7882 W250 0R 1206 SMT RES
R11
7861 W125 10K 5% 0805 SMT RES
C2
7734 __1U0 50V 10%CAP 1206 SMT CER
R48
7861 W125 10K 5% 0805 SMT RES
R30
7882 W250 0R 1206 SMT RES
R12
7864 W125 100K 5% 0805 SMT RES
C3
7613 100N 25V 10%CAP 0805 SMT X7R
R49
7861 W125 10K 5% 0805 SMT RES
R31
7882 W250 0R 1206 SMT RES
R13
7739 W250 1R 5% 1206 SMT RES
C4
7734 __1U0 50V 10%CAP 1206 SMT CER
R50
7861 W125 10K 5% 0805 SMT RES
R32
7882 W250 0R 1206 SMT RES
R14
7861 W125 10K 5% 0805 SMT RES
C5
7613 100N 25V 10%CAP 0805 SMT X7R
R51
7882 W250 0R 1206 SMT RES
R33
7998 W750 0R 1% 2010 SMT JMP
R15
7853 W250 100R 5% 1206 SMT RES
C6
7734 __1U0 50V 10%CAP 1206 SMT CER
R52
7882 W250 0R 1206 SMT RES
R34
7882 W250 0R 1206 SMT RES
R16
7882 W250 0R 1206 SMT RES
C8
7734 __1U0 50V 10%CAP 1206 SMT CER
TP2
8002 TEST POINT MINIATURE SMT
R35
7834 _10K 5% THERMISTOR NTC 0603 SMT
R17
7882 W250 0R 1206 SMT RES
C9
7736 470N 50V 5%CAP 1206 SMT X7R
TP3
8002 TEST POINT MINIATURE SMT
R36
7882 W250 0R 1206 SMT RES
R18
7882 W250 0R 1206 SMT RES
C10
7736 470N 50V 5%CAP 1206 SMT X7R
U1
6653 AL8805 HE 36V 1A BUCK LED DRV SOT25
R38
7882 W250 0R 1206 SMT RES
R19
7882 W250 0R 1206 SMT RES
C11
7693 __1N 50V 5%CAP 0805 SMT NPO
U2
6654 CY8C32 PSOC SSOP48 16KB T&R
R39
7882 W250 0R 1206 SMT RES
R21
7882 W250 0R 1206 SMT RES
C12
7613 100N 25V 10%CAP 0805 SMT X7R
U3
6653 AL8805 HE 36V 1A BUCK LED DRV SOT25
R40
7882 W250 0R 1206 SMT RES
R22
7882 W250 0R 1206 SMT RES
C13
7878 __1U 25V 20%CAP 1206 SMT X7R
U4
6653 AL8805 HE 36V 1A BUCK LED DRV SOT25
R41
7882 W250 0R 1206 SMT RES
R23
5065 W500 0R1 1% 1206 SMT RES
C14
7878 __1U 25V 20%CAP 1206 SMT X7R
U5
6653 AL8805 HE 36V 1A BUCK LED DRV SOT25
R42
7882 W250 0R 1206 SMT RES
R24
7882 W250 0R 1206 SMT RES
C16
8105 100N 250V 10%CAP 1206 SMT X7R
U6
8214 MC78L05 REG 5V SMT SO8
R43
7882 W250 0R 1206 SMT RES
R25
7882 W250 0R 1206 SMT RES
C17
7878 __1U 25V 20%CAP 1206 SMT X7R
W1
7994 2X2 3 MM MICRO MATE-N-LOK SMT
R44
7882 W250 0R 1206 SMT RES
R26
7882 W250 0R 1206 SMT RES
C18
7734 __1U0 50V 10%CAP 1206 SMT CER
W2
4192 3 PIN HEADER 1.5MM HORZ MINI SMT
R45
7882 W250 0R 1206 SMT RES
R27
7882 W250 0R 1206 SMT RES
C19
7613 100N 25V 10%CAP 0805 SMT X7R
W3
4183 10 CIR DUAL ROW HDR 0.05 SPC SMT
R46
7882 W250 0R 1206 SMT RES
R28
7882 W250 0R 1206 SMT RES
C20
7613 100N 25V 10%CAP 0805 SMT X7R
C1
7734 __1U0 50V 10%CAP 1206 SMT CER
R47
7861 W125 10K 5% 0805 SMT RES
R29
7882 W250 0R 1206 SMT RES
C21
7613 100N 25V 10%CAP 0805 SMT X7R
C2
7734 __1U0 50V 10%CAP 1206 SMT CER
R48
7861 W125 10K 5% 0805 SMT RES
R30
7882 W250 0R 1206 SMT RES
C23
7878 __1U 25V 20%CAP 1206 SMT X7R
C3
5979 100N 50V 5%CAP 0805 SMT X7R
R49
7861 W125 10K 5% 0805 SMT RES
R31
7882 W250 0R 1206 SMT RES
D1
7893 MBRA340T3 40V 3A SHTKY 403D SMT
C4
7734 __1U0 50V 10%CAP 1206 SMT CER
R50
7861 W125 10K 5% 0805 SMT RES
R32
7882 W250 0R 1206 SMT RES
D3
7893 MBRA340T3 40V 3A SHTKY 403D SMT
C5
5979 100N 50V 5%CAP 0805 SMT X7R
R51
7882 W250 0R 1206 SMT RES
R33
7998 W750 0R 1% 2010 SMT JMP
D4
7893 MBRA340T3 40V 3A SHTKY 403D SMT
C6
7734 __1U0 50V 10%CAP 1206 SMT CER
R52
7882 W250 0R 1206 SMT RES
R34
7882 W250 0R 1206 SMT RES
D5
7893 MBRA340T3 40V 3A SHTKY 403D SMT
C8
7734 __1U0 50V 10%CAP 1206 SMT CER
TP2
8002 TEST POINT MINIATURE SMT
R35
7834 _10K 5% THERMISTOR NTC 0603 SMT
D6
7620 MMBZ5227B 3V6 0W35 5% SMT ZEN
C9
7736 470N 50V 5%CAP 1206 SMT X7R
TP3
8002 TEST POINT MINIATURE SMT
R36
7882 W250 0R 1206 SMT RES
D7
7520 BZX84B5V1 5V1 0W2 SOT-23 SMT ZEN
C10
7736 470N 50V 5%CAP 1206 SMT X7R
U1
6653 AL8805 HE 36V 1A BUCK LED DRV SOT25
R38
7882 W250 0R 1206 SMT RES
L3
8108 120UH COIL 0R4 10MMSQ SMT
C11
7693 __1N 50V 5%CAP 0805 SMT NPO
U2
6654 CY8C32 PSOC SSOP48 16KB T&R
R39
7882 W250 0R 1206 SMT RES
L4
8108 120UH COIL 0R4 10MMSQ SMT
C12
5979 100N 50V 5%CAP 0805 SMT X7R
U3
6653 AL8805 HE 36V 1A BUCK LED DRV SOT25
R40
7882 W250 0R 1206 SMT RES
L6
8108 120UH COIL 0R4 10MMSQ SMT
C13
7878 __1U 25V 20%CAP 1206 SMT X7R
U4
6653 AL8805 HE 36V 1A BUCK LED DRV SOT25
R41
7882 W250 0R 1206 SMT RES
L7
8108 120UH COIL 0R4 10MMSQ SMT
C14
7878 __1U 25V 20%CAP 1206 SMT X7R
U5
6653 AL8805 HE 36V 1A BUCK LED DRV SOT25
R42
7882 W250 0R 1206 SMT RES
L8
7732 220.0UH COIL SMT
C16
8105 100N 250V 10%CAP 1206 SMT X7R
U6
8214 MC78L05 REG 5V SMT SO8
R43
7882 W250 0R 1206 SMT RES
LD1
5919 0A7 RGBW LED EMITTER SMT
C17
7878 __1U 25V 20%CAP 1206 SMT X7R
W1
7994 2X2 3 MM MICRO MATE-N-LOK SMT
R44
7882 W250 0R 1206 SMT RES
LD2
5919 0A7 RGBW LED EMITTER SMT
C18
7734 __1U0 50V 10%CAP 1206 SMT CER
W2
4219 2 PIN HEADER 2MM HORZ SM4 SMT
R45
7882 W250 0R 1206 SMT RES
LD3
5919 0A7 RGBW LED EMITTER SMT
C19
5979 100N 50V 5%CAP 0805 SMT X7R
W3
4183 10 CIR DUAL ROW HDR 0.05 SPC SMT
R46
7882 W250 0R 1206 SMT RES
LD4
5919 0A7 RGBW LED EMITTER SMT
C20
5979 100N 50V 5%CAP 0805 SMT X7R
C1
7734 __1U0 50V 10%CAP 1206 SMT CER
R47
7861 W125 10K 5% 0805 SMT RES
Q1
7743 FDFS6N754 MFET & SCHTKY SMT
C21
5979 100N 50V 5%CAP 0805 SMT X7R
C2
7734 __1U0 50V 10%CAP 1206 SMT CER
R48
7861 W125 10K 5% 0805 SMT RES
R1
7882 W250 0R 1206 SMT RES
C23
7878 __1U 25V 20%CAP 1206 SMT X7R
C3
5979 100N 50V 5%CAP 0805 SMT X7R
R49
7861 W125 10K 5% 0805 SMT RES
R2
7747 W125 0R06 1% 1206 SMT RES
D1
7893 MBRA340T3 40V 3A SHTKY 403D SMT
C4
7734 __1U0 50V 10%CAP 1206 SMT CER
R50
7861 W125 10K 5% 0805 SMT RES
R3
7882 W250 0R 1206 SMT RES
D3
7893 MBRA340T3 40V 3A SHTKY 403D SMT
C5
5979 100N 50V 5%CAP 0805 SMT X7R
R51
7882 W250 0R 1206 SMT RES
R4
7747 W125 0R06 1% 1206 SMT RES
D4
7893 MBRA340T3 40V 3A SHTKY 403D SMT
C6
7734 __1U0 50V 10%CAP 1206 SMT CER
R52
7882 W250 0R 1206 SMT RES
R5
7882 W250 0R 1206 SMT RES
D5
7893 MBRA340T3 40V 3A SHTKY 403D SMT
C8
7734 __1U0 50V 10%CAP 1206 SMT CER
TP2
8002 TEST POINT MINIATURE SMT
R6
7747 W125 0R06 1% 1206 SMT RES
D6
7620 MMBZ5227B 3V6 0W35 5% SMT ZEN
C9
7736 470N 50V 5%CAP 1206 SMT X7R
TP3
8002 TEST POINT MINIATURE SMT
R7
7882 W250 0R 1206 SMT RES
D7
7520 BZX84B5V1 5V1 0W2 SOT-23 SMT ZEN
C10
7736 470N 50V 5%CAP 1206 SMT X7R
U1
6653 AL8805 HE 36V 1A BUCK LED DRV SOT25
R8
7621 W100 1K0 1% 0805 SMT RES
L3
2912 _12UH COIL 4A 0R04 10MMSQ SMT
C11
7693 __1N 50V 5%CAP 0805 SMT NPO
U2
6654 CY8C32 PSOC SSOP48 16KB T&R
R9
7821 W125 10R0 1% 0805 SMT RES
L4
2912 _12UH COIL 4A 0R04 10MMSQ SMT
C12
5979 100N 50V 5%CAP 0805 SMT X7R
U3
6653 AL8805 HE 36V 1A BUCK LED DRV SOT25
R10
8133 1W00 1K 5% 2512 SMT RES
L6
2912 _12UH COIL 4A 0R04 10MMSQ SMT
C13
7878 __1U 25V 20%CAP 1206 SMT X7R
U4
6653 AL8805 HE 36V 1A BUCK LED DRV SOT25
R11
7861 W125 10K 5% 0805 SMT RES
L7
2912 _12UH COIL 4A 0R04 10MMSQ SMT
C14
7878 __1U 25V 20%CAP 1206 SMT X7R
U5
6653 AL8805 HE 36V 1A BUCK LED DRV SOT25
R12
7864 W125 100K 5% 0805 SMT RES
L8
7732 220.0UH COIL SMT
C16
8105 100N 250V 10%CAP 1206 SMT X7R
U6
8214 MC78L05 REG 5V SMT SO8
R13
7739 W250 1R 5% 1206 SMT RES
LD1
5919 0A7 RGBW LED EMITTER SMT
C17
7878 __1U 25V 20%CAP 1206 SMT X7R
W1
7994 2X2 3 MM MICRO MATE-N-LOK SMT
R14
7861 W125 10K 5% 0805 SMT RES
LD2
5919 0A7 RGBW LED EMITTER SMT
C18
7734 __1U0 50V 10%CAP 1206 SMT CER
W2
4219 2 PIN HEADER 2MM HORZ SM4 SMT
R15
7853 W250 100R 5% 1206 SMT RES
LD3
5919 0A7 RGBW LED EMITTER SMT
C19
5979 100N 50V 5%CAP 0805 SMT X7R
W3
4183 10 CIR DUAL ROW HDR 0.05 SPC SMT
R16
7882 W250 0R 1206 SMT RES
LD4
5919 0A7 RGBW LED EMITTER SMT
C20
5979 100N 50V 5%CAP 0805 SMT X7R
R17
7882 W250 0R 1206 SMT RES
Q1
7743 FDFS6N754 MFET & SCHTKY SMT
C21
5979 100N 50V 5%CAP 0805 SMT X7R
R18
7882 W250 0R 1206 SMT RES
R1
7882 W250 0R 1206 SMT RES
C23
7878 __1U 25V 20%CAP 1206 SMT X7R
R19
7882 W250 0R 1206 SMT RES
R2
5065 W500 0R1 1% 1206 SMT RES
D1
7893 MBRA340T3 40V 3A SHTKY 403D SMT
R21
7882 W250 0R 1206 SMT RES
R3
7882 W250 0R 1206 SMT RES
D3
7893 MBRA340T3 40V 3A SHTKY 403D SMT
R22
7882 W250 0R 1206 SMT RES
R4
5065 W500 0R1 1% 1206 SMT RES
D4
7893 MBRA340T3 40V 3A SHTKY 403D SMT
R23
7747 W125 0R06 1% 1206 SMT RES
R5
7882 W250 0R 1206 SMT RES
D5
7893 MBRA340T3 40V 3A SHTKY 403D SMT
R24
7882 W250 0R 1206 SMT RES
R6
5065 W500 0R1 1% 1206 SMT RES
D6
7620 MMBZ5227B 3V6 0W35 5% SMT ZEN
R25
7882 W250 0R 1206 SMT RES
R7
7882 W250 0R 1206 SMT RES
D7
7520 BZX84B5V1 5V1 0W2 SOT-23 SMT ZEN
R26
7882 W250 0R 1206 SMT RES
R8
7621 W100 1K0 1% 0805 SMT RES
L3
2912 _12UH COIL 4A 0R04 10MMSQ SMT
R27
7882 W250 0R 1206 SMT RES
R9
7821 W125 10R0 1% 0805 SMT RES
L4
2912 _12UH COIL 4A 0R04 10MMSQ SMT
R28
7882 W250 0R 1206 SMT RES
R10
8133 1W00 1K 5% 2512 SMT RES
L6
2912 _12UH COIL 4A 0R04 10MMSQ SMT
R29
7882 W250 0R 1206 SMT RES
R11
7861 W125 10K 5% 0805 SMT RES
L7
2912 _12UH COIL 4A 0R04 10MMSQ SMT
R30
7882 W250 0R 1206 SMT RES
R12
7864 W125 100K 5% 0805 SMT RES
L8
7732 220.0UH COIL SMT
R31
7882 W250 0R 1206 SMT RES
R13
7739 W250 1R 5% 1206 SMT RES
LD1
5919 0A7 RGBW LED EMITTER SMT
R32
7882 W250 0R 1206 SMT RES
R14
7861 W125 10K 5% 0805 SMT RES
LD2
5919 0A7 RGBW LED EMITTER SMT
R33
7998 W750 0R 1% 2010 SMT JMP
R15
7853 W250 100R 5% 1206 SMT RES
LD3
5919 0A7 RGBW LED EMITTER SMT
R34
7882 W250 0R 1206 SMT RES
R16
7882 W250 0R 1206 SMT RES
LD4
5919 0A7 RGBW LED EMITTER SMT
R35
7834 _10K 5% THERMISTOR NTC 0603 SMT
R17
7882 W250 0R 1206 SMT RES
Q1
7743 FDFS6N754 MFET & SCHTKY SMT
R36
7882 W250 0R 1206 SMT RES
R18
7882 W250 0R 1206 SMT RES
R1
7882 W250 0R 1206 SMT RES
R38
7882 W250 0R 1206 SMT RES
R19
7882 W250 0R 1206 SMT RES
R2
5065 W500 0R1 1% 1206 SMT RES
R39
7882 W250 0R 1206 SMT RES
R21
7882 W250 0R 1206 SMT RES
R3
7882 W250 0R 1206 SMT RES
R40
7882 W250 0R 1206 SMT RES
R22
7882 W250 0R 1206 SMT RES
R4
5065 W500 0R1 1% 1206 SMT RES
R41
7882 W250 0R 1206 SMT RES
R23
5065 W500 0R1 1% 1206 SMT RES
R5
7882 W250 0R 1206 SMT RES
R42
7882 W250 0R 1206 SMT RES
R24
7882 W250 0R 1206 SMT RES
R6
5065 W500 0R1 1% 1206 SMT RES
R43
7882 W250 0R 1206 SMT RES
R25
7882 W250 0R 1206 SMT RES
R7
7882 W250 0R 1206 SMT RES
R44
7882 W250 0R 1206 SMT RES
R26
7882 W250 0R 1206 SMT RES
R8
7621 W100 1K0 1% 0805 SMT RES
R45
7882 W250 0R 1206 SMT RES
R27
7882 W250 0R 1206 SMT RES
R9
7821 W125 10R0 1% 0805 SMT RES
R46
7882 W250 0R 1206 SMT RES R28 7882 W250 0R 1206 SMT RES R10 8133 1W00 1K 5% 2512 SMT RES
M1487 05 Parts Reference List 9/23/2020
REF YS # Description REF YS # Description REF
YS # Description
AI-ASS
M1487-59 LP-LED4X CNTRL BRD
D13
6657 B160-E3 60V 1A0 SCH DO214AC SMT
R57
8000 1W00 39R 5% 2512 SMT RES
C1
7878 __1U 25V 20%CAP 1206 SMT X7R
J1
3918 1/4" JCK PCB MT HORZ SLIM W/SCREW
R58
7861
W125 10K 5% 0805 SMT RES
C2
7878 __1U 25V 20%CAP 1206 SMT X7R
J2
3922 XLR FEML PCB MT HORZ THIN SNAP-IN
R59
7861 W125 10K 5% 0805 SMT RES
C3
5979 100N 50V 5%CAP 0805 SMT X7R
J3
3923 XLR MALE PCB MT HORZ MTHOLE-V SNAP
R64
7861 W125 10K 5% 0805 SMT RES
C4
5979 100N 50V 5%CAP 0805 SMT X7R
J6
3922 XLR FEML PCB MT HORZ THIN SNAP-IN
R65
7856 W125 470R 5% 0805 SMT RES
C5
7602 330P 50V 5%CAP 0805 SMT NPO
J7
3923 XLR MALE PCB MT HORZ MTHOLE-V SNAP
R66
4970 PTC RESETTABLE 0A2 0R8 1812 SMT
C6
7919 680U 6V3 20%CAP 8X10 SMT ELE
L1
8256 FERRITE BEAD 600R @100MHZ 0805 SMT
R67
7856 W125 470R 5% 0805 SMT RES
C7
5979 100N 50V 5%CAP 0805 SMT X7R
L3
7754 FERRITE BEAD 1A5 26R SMT 1206
R69
8011 2W00 680R 1% 2512 SMT RES
C8
5979 100N 50V 5%CAP 0805 SMT X7R
L4
7754 FERRITE BEAD 1A5 26R SMT 1206
R70
7860 W125 4K7 5% 0805 SMT RES
C9
5979 100N 50V 5%CAP 0805 SMT X7R
L5
7754 FERRITE BEAD 1A5 26R SMT 1206
R71
7621 W100 1K0 1% 0805 SMT RES
C12
7880 _47U 35V 20%CAP 6.3MM SMT ELE
L6
7941 __8.2UH COIL 1210 SMT
R72
7744 W250 4K7 5% 1206 SMT RES
C16
7693 __1N 50V 5%CAP 0805 SMT NPO
L7
8152 220UH COIL 10X10MM SMT
R73
7621 W100 1K0 1% 0805 SMT RES
C17
7693 __1N 50V 5%CAP 0805 SMT NPO
LD1
6408
GRN 3MM LED 2V2 20MA DIFFUSD
R74
7621 W100 1K0 1% 0805 SMT RES
C18
7693 __1N 50V 5%CAP 0805 SMT NPO
MIC1
2386
MIC MEMS ANALOG OMNI M3125 SMT
R75
7862 W125 20K 5% 0805 SMT RES
C19
7693 __1N 50V 5%CAP 0805 SMT NPO
P1
4969
ROT GRY 20MM 5BIT ENCODER P31
R76
7928 W125 10K00 0.1% 0805 SMT RES
C20
7693 __1N 50V 5%CAP 0805 SMT NPO
P2
4969
ROT GRY 20MM 5BIT ENCODER P31
R77
7862 W125 20K 5% 0805 SMT RES
C21
7693 __1N 50V 5%CAP 0805 SMT NPO
P3
4969
ROT GRY 20MM 5BIT ENCODER P31
R78
7622 W100 1M0 1% 0805 SMT RES
C22
7693 __1N 50V 5%CAP 0805 SMT NPO
P4
4969
ROT GRY 20MM 5BIT ENCODER P31
R79
7624 W100 100R 1% 0805 SMT RES
C23
7693 __1N 50V 5%CAP 0805 SMT NPO
P5
4969
ROT GRY 20MM 5BIT ENCODER P31
R80
8011 2W00 680R 1% 2512 SMT RES
C24
5979 100N 50V 5%CAP 0805 SMT X7R
P6
4526
_10K TRIM POT 6MM TOP ADJ RAD
R81
7928 W125 10K00 0.1% 0805 SMT RES
C25
7605 __1N5 50V 5%CAP 0805 SMT NPO
P7
4526
_10K TRIM POT 6MM TOP ADJ RAD
R82
7676 W100 2K0 1% 0805 SMT RES
C26
7925 _22P 50V 5%CAP 0805 SMT NPO
P8
4526 _10K TRIM POT 6MM TOP ADJ RAD
R83
7621
W100 1K0 1% 0805 SMT RES
C27
7878 __1U 25V 20%CAP 1206 SMT X7R
P9
4527 ROT GRY HOR 20MM 4BIT ENCODER P31
R86
7856 W125 470R 5% 0805 SMT RES
C28
5979 100N 50V 5%CAP 0805 SMT X7R
PCB1
M1487BLANK 2_OZ 2SD 98.46 SQIN 02PER LP-LED4X
R87
7856 W125 470R 5% 0805 SMT RES
C29
7878 __1U 25V 20%CAP 1206 SMT X7R
Q2
8276 SI1308EDL NCH MFET SOT323 SMT
R88
7856
W125 470R 5% 0805 SMT RES
C30
7875 100N 100V 10%CAP 1206 SMT X7R
Q3
7843 MJB42C PNP D2PAK SMT TS
R89
7856
W125 470R 5% 0805 SMT RES
C31
7605 __1N5 50V 5%CAP 0805 SMT NPO
Q4
7805 MMBT3906LT1 PNP SOT-23 SMT T&R
R90
5062
FUSE FAST 3A5 125V SMT 2410
C32
5979 100N 50V 5%CAP 0805 SMT X7R
Q5
7838 MMBT3904 NPN SOT-23 SMT
R91
5062 FUSE FAST 3A5 125V SMT 2410
C33
7878 __1U 25V 20%CAP 1206 SMT X7R
R1
5078 W250 2R4 5% 1206 SMT RES
R93
7621 W100 1K0 1% 0805 SMT RES
C34
7925 _22P 50V 5%CAP 0805 SMT NPO
R2
8102 W125 3K01 1% 0805 SMT RES
S1
4193 SPST SWITCH RA 12POS DIP NO PRINT
C35
7925 _22P 50V 5%CAP 0805 SMT NPO
R3
7675 W125 1K21 1% 0805 SMT RES
SNL1
8370 1 MIL POLYIMIDE LABEL, 1" X .380"
C36
7605 __1N5 50V 5%CAP 0805 SMT NPO
R4
7978 W500 3R3 5% 1210 SMT RES
TP1
8002 TEST POINT MINIATURE SMT
C37
7875 100N 100V 10%CAP 1206 SMT X7R
R5
7833 _47K 5% THERMISTOR NTC 0603 SMT
TP2
8002 TEST POINT MINIATURE SMT
C38
7917 _33U 25V 20%CAP 6.3X5.5 SMT EL
R6
7858 W125 1K5 5% 0805 SMT RES
TP3
8002
TEST POINT MINIATURE SMT
C39
7917 _33U 25V 20%CAP 6.3X5.5 SMT EL
R7
7676 W100 2K0 1% 0805 SMT RES
TP4
8002 TEST POINT MINIATURE SMT
C40
7917 _33U 25V 20%CAP 6.3X5.5 SMT EL
R8
7676 W100 2K0 1% 0805 SMT RES
TP5
8002 TEST POINT MINIATURE SMT
C41
7693 __1N 50V 5%CAP 0805 SMT NPO
R10
7902 1W00 1K8 5% 2512 SMT RES
U1
6656 MK10DX128VLL7 72MHZ MCU IC LQFP100
C42
5979 100N 50V 5%CAP 0805 SMT X7R
R11
7676 W100 2K0 1% 0805 SMT RES
U2
7719 MC33063ADR BUCK/BOOST INV IC SO8
C43
5979 100N 50V 5%CAP 0805 SMT X7R
R14
7854 W125 47R 5% 0805 SMT RES
U4
6793 PROC4 BLE MODULE 14X19MM SMT
C44
5979 100N 50V 5%CAP 0805 SMT X7R
R15
7854 W125 47R 5% 0805 SMT RES
U5
7946 TLV2474 QUAD OPAMP 2.8M SMT 14SOIC
C45
7878 __1U 25V 20%CAP 1206 SMT X7R
R16
7621
W100 1K0 1% 0805 SMT RES
U6
7948 SN74AHC138DR 3TO8 DECOD SMT IC
C46
7878 __1U 25V 20%CAP 1206 SMT X7R
R17
7621 W100 1K0 1% 0805 SMT RES
U7
7946
TLV2474 QUAD OPAMP 2.8M SMT 14SOIC
C47
5979 100N 50V 5%CAP 0805 SMT X7R
R18
7621 W100 1K0 1% 0805 SMT RES
U8
7945 50K MAX5414EUD DPOT SMT IC
C48
7878 __1U 25V 20%CAP 1206 SMT X7R
R19
7676 W100 2K0 1% 0805 SMT RES
U9
7661 LM393D DUAL COMPARATOR SMT SO-8
C49
5979 100N 50V 5%CAP 0805 SMT X7R
R20
7621 W100 1K0 1% 0805 SMT RES
U10
7959 QUAD TRI-STATE BUFFER SMT SOIC14
C50
5979 100N 50V 5%CAP 0805 SMT X7R
R21
7621 W100 1K0 1% 0805 SMT RES
U11
6658 RS485/422 RCVR IC SMT SOT23-5
C51
5979 100N 50V 5%CAP 0805 SMT X7R
R22
7621 W100 1K0 1% 0805 SMT RES
U13
6679 TLV2316 DUAL OPAMP LOWNOISE SMT SO8
C52
5979 100N 50V 5%CAP 0805 SMT X7R
R23
7621 W100 1K0 1% 0805 SMT RES
U14
6679 TLV2316 DUAL OPAMP LOWNOISE SMT SO8
C53
5979 100N 50V 5%CAP 0805 SMT X7R
R24
7621 W100 1K0 1% 0805 SMT RES
U15
6677 SN74LVC1G3157 SPDT SW SMT SOT236
C54
7969 _10U 16V 20%CAP 0805 SMT X5R
R25
7676 W100 2K0 1% 0805 SMT RES
U16
7012 LP2950-33 LDRP TO92 FIXED 3V3 REG
C55
7811 100U 25V 20%CAP 8X5.4 SMT ELE
R26
7621 W100 1K0 1% 0805 SMT RES
W1
2327 6 CIR XH-HEADER 0.098IN
C56
7927 100P 50V 10%CAP 0805 SMT NPO
R27
5062
FUSE FAST 3A5 125V SMT 2410
W2
4183 10 CIR DUAL ROW HDR 0.05 SPC SMT
C57
7927 100P 50V 10%CAP 0805 SMT NPO
R28
5062
FUSE FAST 3A5 125V SMT 2410
W3
2343 6 CIR XH-HEADER RA 0.098IN
C59
5979 100N 50V 5%CAP 0805 SMT X7R
R29
7853 W250 100R 5% 1206 SMT RES
W4
4194 2X2 3 MM MICRO MATE-N-LOK VRT
C60
7693 __1N 50V 5%CAP 0805 SMT NPO
R30
7621 W100 1K0 1% 0805 SMT RES
W5
4194 2X2 3 MM MICRO MATE-N-LOK VRT
C61
5979 100N 50V 5%CAP 0805 SMT X7R
R31
7676 W100 2K0 1% 0805 SMT RES
W6
4194 2X2 3 MM MICRO MATE-N-LOK VRT
C62
7780 _10U 16V 20%CAP SMT ELC
R32
7676 W100 2K0 1% 0805 SMT RES
W7
4194 2X2 3 MM MICRO MATE-N-LOK VRT
C63
7780 _10U 16V 20%CAP SMT ELC
R33
7654 W250 619K 1% 1206 SMT RES
W9
4164 2 PIN .2 POWER PIN HEADER RA
C64
7780 _10U 16V 20%CAP SMT ELC
R34
8189 W125 4K02 0.1% 0805 SMT RES
W10
4183 10 CIR DUAL ROW HDR 0.05 SPC SMT
C65
8088 _10U 16V 10%CAP 0805 SMT X6S
R35
7654 W250 619K 1% 1206 SMT RES
C66
8088 _10U 16V 10%CAP 0805 SMT X6S
R36
8189 W125 4K02 0.1% 0805 SMT RES
C67
5979 100N 50V 5%CAP 0805 SMT X7R
R38
7676 W100 2K0 1% 0805 SMT RES
C68
5979 100N 50V 5%CAP 0805 SMT X7R
R39
6482 115R 20% 0W0 THERMISTOR PTC
C69
5979 100N 50V 5%CAP 0805 SMT X7R
R40
7676
W100 2K0 1% 0805 SMT RES
C70
5979 100N 50V 5%CAP 0805 SMT X7R
R41
7853 W250 100R 5% 1206 SMT RES
C71
5979 100N 50V 5%CAP 0805 SMT X7R
R42
7853 W250 100R 5% 1206 SMT RES
C72
7737 _10N 50V 10%CAP 0805 SMT X7R
R43
7853 W250 100R 5% 1206 SMT RES
C73
5979 100N 50V 5%CAP 0805 SMT X7R
R44
7861 W125 10K 5% 0805 SMT RES
D1
6657 B160-E3 60V 1A0 SCH DO214AC SMT
R45
7624 W100 100R 1% 0805 SMT RES
D2
8080 SMAJ150CA 150V 400W BIDIR SMT
R46
7624 W100 100R 1% 0805 SMT RES
D3
7616 BZX84C6V2 6V2 0W2 SOT-23 SMT ZEN
R47
7703 W125 82K5 1% 0805 SMT RES
D4
8054 MMSZ15T1G 15V 0W5 5% SMT ZEN
R48
7703 W125 82K5 1% 0805 SMT RES
D5
6657 B160-E3 60V 1A0 SCH DO214AC SMT
R49
7824 W125 47K5 1% 0805 SMT RES
D6
7996 SMAZ10-13-F 10V0 1W0 10% SMT ZEN
R50
7861 W125 10K 5% 0805 SMT RES
D7
8080 SMAJ150CA 150V 400W BIDIR SMT
R51
7853 W250 100R 5% 1206 SMT RES
D8
8080 SMAJ150CA 150V 400W BIDIR SMT
R52
7853
W250 100R 5% 1206 SMT RES
D9
8054 MMSZ15T1G 15V 0W5 5% SMT ZEN
R53
8133 1W00 1K 5% 2512 SMT RES
D10
8054 MMSZ15T1G 15V 0W5 5% SMT ZEN
R54
8133 1W00 1K 5% 2512 SMT RES
D11
8054 MMSZ15T1G 15V 0W5 5% SMT ZEN
R55
7853 W250 100R 5% 1206 SMT RES
D12
8109 BAV21WS 200V 0A2 SOD323 SMT
R56
8000 1W00 39R 5% 2512 SMT RES
M1488 03 Parts Reference List 9/23/2020
REF YS # Description
REF YS # Description REF YS #
Description
AI-ASS
M1488-59
LP-LED2X CNTRL BRD
D13
6657 B160-E3 60V 1A0 SCH DO214AC SMT
R57
8000 1W00 39R 5% 2512 SMT RES
BLOK
5979 100N 50V 5%CAP 0805 SMT X7R
J1
3918 1/4" JCK PCB MT HORZ SLIM W/SCREW
R58
7861 W125 10K 5% 0805 SMT RES
BLOK1
5979 100N 50V 5%CAP 0805 SMT X7R
J2
3922 XLR FEML PCB MT HORZ THIN SNAP-IN
R59
7861 W125 10K 5% 0805 SMT RES
BLOK2
5979 100N 50V 5%CAP 0805 SMT X7R
J3
3923 XLR MALE PCB MT HORZ MTHOLE-V SNAP
R64
7861 W125 10K 5% 0805 SMT RES
BLOK3
5979 100N 50V 5%CAP 0805 SMT X7R
J6
3922 XLR FEML PCB MT HORZ THIN SNAP-IN
R66
4970 PTC RESETTABLE 0A2 0R8 1812 SMT
C1
7878 __1U 25V 20%CAP 1206 SMT X7R
J7
3923 XLR MALE PCB MT HORZ MTHOLE-V SNAP
R69
8011 2W00 680R 1% 2512 SMT RES
C2
7878 __1U 25V 20%CAP 1206 SMT X7R
L1
8256 FERRITE BEAD 600R @100MHZ 0805 SMT
R70
7860 W125 4K7 5% 0805 SMT RES
C3
5979 100N 50V 5%CAP 0805 SMT X7R
L3
7754 FERRITE BEAD 1A5 26R SMT 1206
R71
7621 W100 1K0 1% 0805 SMT RES
C4
5979 100N 50V 5%CAP 0805 SMT X7R
L4
7754 FERRITE BEAD 1A5 26R SMT 1206
R72
7744 W250 4K7 5% 1206 SMT RES
C5
7602 330P 50V 5%CAP 0805 SMT NPO
L5
7754
FERRITE BEAD 1A5 26R SMT 1206
R73
7621 W100 1K0 1% 0805 SMT RES
C6
7919 680U 6V3 20%CAP 8X10 SMT ELE
L6
7941
__8.2UH COIL 1210 SMT
R74
7621 W100 1K0 1% 0805 SMT RES
C7
7811 100U 25V 20%CAP 8X5.4 SMT ELE
L7
8152 220UH COIL 10X10MM SMT
R75
7862 W125 20K 5% 0805 SMT RES
C10
7736 470N 50V 5%CAP 1206 SMT X7R
L8
7974 1000UH 10% COIL 12MM SMT
R76
7928 W125 10K00 0.1% 0805 SMT RES
C11
7736 470N 50V 5%CAP 1206 SMT X7R
LD1
6408 GRN 3MM LED 2V2 20MA DIFFUSD
R77
7862 W125 20K 5% 0805 SMT RES
C12
7880 _47U 35V 20%CAP 6.3MM SMT ELE
MIC1
2386 MIC MEMS ANALOG OMNI M3125 SMT
R78
7622 W100 1M0 1% 0805 SMT RES
C16
7693 __1N 50V 5%CAP 0805 SMT NPO
P1
4969 ROT GRY 20MM 5BIT ENCODER P31
R79
7624 W100 100R 1% 0805 SMT RES
C17
7693 __1N 50V 5%CAP 0805 SMT NPO
P2
4969 ROT GRY 20MM 5BIT ENCODER P31
R80
8011 2W00 680R 1% 2512 SMT RES
C18
7693 __1N 50V 5%CAP 0805 SMT NPO
P5
4969 ROT GRY 20MM 5BIT ENCODER P31
R81
7928 W125 10K00 0.1% 0805 SMT RES
C19
7693 __1N 50V 5%CAP 0805 SMT NPO
P9
4527 ROT GRY HOR 20MM 4BIT ENCODER P31
R86
7856 W125 470R 5% 0805 SMT RES
C24
5979 100N 50V 5%CAP 0805 SMT X7R
PCB1
M1488BLANK 1_OZ 2SD 85.94 SQIN 2PER LP-LED2X
R87
7856 W125 470R 5% 0805 SMT RES
C25
7605 __1N5 50V 5%CAP 0805 SMT NPO
Q1
7743 FDFS6N754 MFET & SCHTKY SMT
R93
7621 W100 1K0 1% 0805 SMT RES
C26
7925 _22P 50V 5%CAP 0805 SMT NPO
Q2
8276 SI1308EDL NCH MFET SOT323 SMT
S1
4193
SPST SWITCH RA 12POS DIP NO PRINT
C27
7878 __1U 25V 20%CAP 1206 SMT X7R
Q3
7843 MJB42C PNP D2PAK SMT TS
S2
3425 DPDT PUSH SW PCMT BREAK B4 MAKE
C28
5979 100N 50V 5%CAP 0805 SMT X7R
Q4
7805 MMBT3906LT1 PNP SOT-23 SMT T&R
SNL1
8370 1 MIL POLYIMIDE LABEL, 1" X .380"
C29
7878 __1U 25V 20%CAP 1206 SMT X7R
Q5
7838 MMBT3904 NPN SOT-23 SMT
TP1
8002 TEST POINT MINIATURE SMT
C30
7875 100N 100V 10%CAP 1206 SMT X7R
R1
7849 W250 0R27 5% 1206 SMT RES
TP2
8002
TEST POINT MINIATURE SMT
C31
7605 __1N5 50V 5%CAP 0805 SMT NPO
R2
8102 W125 3K01 1% 0805 SMT RES
TP3
8002 TEST POINT MINIATURE SMT
C32
5979
100N 50V 5%CAP 0805 SMT X7R
R3
7675 W125 1K21 1% 0805 SMT RES
TP4
8002 TEST POINT MINIATURE SMT
C33
7878 __1U 25V 20%CAP 1206 SMT X7R
R4
7978 W500 3R3 5% 1210 SMT RES
TP5
8002 TEST POINT MINIATURE SMT
C34
7925 _22P 50V 5%CAP 0805 SMT NPO
R5
7833 _47K 5% THERMISTOR NTC 0603 SMT
U1
6656 MK10DX128VLL7 72MHZ MCU IC LQFP100
C35
7925 _22P 50V 5%CAP 0805 SMT NPO
R6
7858
W125 1K5 5% 0805 SMT RES
U2
7719 MC33063ADR BUCK/BOOST INV IC SO8
C36
7605 __1N5 50V 5%CAP 0805 SMT NPO
R7
7676 W100 2K0 1% 0805 SMT RES
U5
7946 TLV2474 QUAD OPAMP 2.8M SMT 14SOIC
C37
7875 100N 100V 10%CAP 1206 SMT X7R
R8
7676 W100 2K0 1% 0805 SMT RES
U6
7948 SN74AHC138DR 3TO8 DECOD SMT IC
C38
7917 _33U 25V 20%CAP 6.3X5.5 SMT EL
R9
7821 W125 10R0 1% 0805 SMT RES
U7
7946 TLV2474 QUAD OPAMP 2.8M SMT 14SOIC
C39
7917 _33U 25V 20%CAP 6.3X5.5 SMT EL
R10
7902 1W00 1K8 5% 2512 SMT RES
U8
7945
50K MAX5414EUD DPOT SMT IC
C40
7917 _33U 25V 20%CAP 6.3X5.5 SMT EL
R11
7676 W100 2K0 1% 0805 SMT RES
U9
7661 LM393D DUAL COMPARATOR SMT SO-8
C41
7693 __1N 50V 5%CAP 0805 SMT NPO
R12
7864 W125 100K 5% 0805 SMT RES
U10
7959 QUAD TRI-STATE BUFFER SMT SOIC14
C42
5979 100N 50V 5%CAP 0805 SMT X7R
R13
7739 W250 1R 5% 1206 SMT RES
U11
6658 RS485/422 RCVR IC SMT SOT23-5
C43
5979 100N 50V 5%CAP 0805 SMT X7R
R14
7854 W125 47R 5% 0805 SMT RES
U13
6679 TLV2316 DUAL OPAMP LOWNOISE SMT SO8
C44
5979 100N 50V 5%CAP 0805 SMT X7R
R15
7854 W125 47R 5% 0805 SMT RES
U14
6679 TLV2316 DUAL OPAMP LOWNOISE SMT SO8
C45
7878 __1U 25V 20%CAP 1206 SMT X7R
R16
7621 W100 1K0 1% 0805 SMT RES
U15
6677 SN74LVC1G3157 SPDT SW SMT SOT236
C46
7878 __1U 25V 20%CAP 1206 SMT X7R
R17
7621 W100 1K0 1% 0805 SMT RES
U16
7012 LP2950-33 LDRP TO92 FIXED 3V3 REG
C47
5979 100N 50V 5%CAP 0805 SMT X7R
R18
7621 W100 1K0 1% 0805 SMT RES
U17
6793
PROC4 BLE MODULE 14X19MM SMT
C48
7878 __1U 25V 20%CAP 1206 SMT X7R
R19
7676 W100 2K0 1% 0805 SMT RES
W1
2327
6 CIR XH-HEADER 0.098IN
C49
5979 100N 50V 5%CAP 0805 SMT X7R
R20
7621 W100 1K0 1% 0805 SMT RES
W2
4183 10 CIR DUAL ROW HDR 0.05 SPC SMT
C50
5979 100N 50V 5%CAP 0805 SMT X7R
R21
7854
W125 47R 5% 0805 SMT RES
W3
2343 6 CIR XH-HEADER RA 0.098IN
C51
5979 100N 50V 5%CAP 0805 SMT X7R
R22
7621 W100 1K0 1% 0805 SMT RES
W4
4194
2X2 3 MM MICRO MATE-N-LOK VRT
C52
5979 100N 50V 5%CAP 0805 SMT X7R
R23
7621 W100 1K0 1% 0805 SMT RES
W5
4194 2X2 3 MM MICRO MATE-N-LOK VRT
C53
5979 100N 50V 5%CAP 0805 SMT X7R
R25
7856 W125 470R 5% 0805 SMT RES
W6
2337 4 CIR XH-HEADER 0.098IN
C54
7969 _10U 16V 20%CAP 0805 SMT X5R
R26
7856 W125 470R 5% 0805 SMT RES
W7
2337 4 CIR XH-HEADER 0.098IN
C55
7969 _10U 16V 20%CAP 0805 SMT X5R
R27
5062 FUSE FAST 3A5 125V SMT 2410
W9
4164 2 PIN .2 POWER PIN HEADER RA
C56
7927 100P 50V 10%CAP 0805 SMT NPO
R28
5062 FUSE FAST 3A5 125V SMT 2410
W10
4183 10 CIR DUAL ROW HDR 0.05 SPC SMT
C57
7927 100P 50V 10%CAP 0805 SMT NPO
R29
7853 W250 100R 5% 1206 SMT RES
W11
2396 HEADER: 2 CIRCUIT PH CONNECTOR
C59
5979 100N 50V 5%CAP 0805 SMT X7R
R30
7621 W100 1K0 1% 0805 SMT RES
C60
7693 __1N 50V 5%CAP 0805 SMT NPO
R31
7676 W100 2K0 1% 0805 SMT RES
C61
5979 100N 50V 5%CAP 0805 SMT X7R
R32
7676 W100 2K0 1% 0805 SMT RES
C62
7780 _10U 16V 20%CAP SMT ELC
R33
7654 W250 619K 1% 1206 SMT RES
C63
7780 _10U 16V 20%CAP SMT ELC
R34
8189 W125 4K02 0.1% 0805 SMT RES
C64
7780 _10U 16V 20%CAP SMT ELC
R35
7654
W250 619K 1% 1206 SMT RES
C65
8088 _10U 16V 10%CAP 0805 SMT X6S
R36
8189 W125 4K02 0.1% 0805 SMT RES
C66
8088 _10U 16V 10%CAP 0805 SMT X6S
R37
7882 W250 0R 1206 SMT RES
C67
5979 100N 50V 5%CAP 0805 SMT X7R
R38
7676 W100 2K0 1% 0805 SMT RES
C68
5979 100N 50V 5%CAP 0805 SMT X7R
R39
6482 115R 20% 0W0 THERMISTOR PTC
C69
5979 100N 50V 5%CAP 0805 SMT X7R
R40
7676 W100 2K0 1% 0805 SMT RES
C70
5979 100N 50V 5%CAP 0805 SMT X7R
R41
7853 W250 100R 5% 1206 SMT RES
C71
5979 100N 50V 5%CAP 0805 SMT X7R
R42
7853 W250 100R 5% 1206 SMT RES
C72
7737 _10N 50V 10%CAP 0805 SMT X7R
R43
7853 W250 100R 5% 1206 SMT RES
C73
5979 100N 50V 5%CAP 0805 SMT X7R
R44
7861 W125 10K 5% 0805 SMT RES
D1
6657 B160-E3 60V 1A0 SCH DO214AC SMT
R45
7624 W100 100R 1% 0805 SMT RES
D2
8080 SMAJ150CA 150V 400W BIDIR SMT
R46
7624 W100 100R 1% 0805 SMT RES
D3
7616 BZX84C6V2 6V2 0W2 SOT-23 SMT ZEN
R47
7703 W125 82K5 1% 0805 SMT RES
D4
8054 MMSZ15T1G 15V 0W5 5% SMT ZEN
R48
7703 W125 82K5 1% 0805 SMT RES
D5
6657 B160-E3 60V 1A0 SCH DO214AC SMT
R49
7824 W125 47K5 1% 0805 SMT RES
D6
7996 SMAZ10-13-F 10V0 1W0 10% SMT ZEN
R50
7861 W125 10K 5% 0805 SMT RES
D7
8080 SMAJ150CA 150V 400W BIDIR SMT
R51
7853 W250 100R 5% 1206 SMT RES
D8
8080 SMAJ150CA 150V 400W BIDIR SMT
R52
7853 W250 100R 5% 1206 SMT RES
D9
8054 MMSZ15T1G 15V 0W5 5% SMT ZEN
R53
8133 1W00 1K 5% 2512 SMT RES
D10
8054 MMSZ15T1G 15V 0W5 5% SMT ZEN
R54
8133 1W00 1K 5% 2512 SMT RES
D11
8054 MMSZ15T1G 15V 0W5 5% SMT ZEN
R55
7853 W250 100R 5% 1206 SMT RES
D12
8109 BAV21WS 200V 0A2 SOD323 SMT
R56
8000 1W00 39R 5% 2512 SMT RES
M1632 Parts Reference List 11/1/2018
REF YS # Description REF YS #
Description REF YS # Description
AI-ASS
M1632-59 M1632 AMP CONTROL FOR M1637 PCB
R35
5066 W125 22K1 1% 0805 SMT RES
C1
5979 100N 50V 5%CAP 0805 SMT X7R
R36
7821 W125 10R0 1% 0805 SMT RES
C3
7738 _10U0 16V 10%CAP 1206 SMT X7R
R37
7900 W125 30K 0.5% 0805 SMT RES
C4
5979 100N 50V 5%CAP 0805 SMT X7R
R38
7622 W100 1M0 1% 0805 SMT RES
C5
7880 _47U 35V 20%CAP 6.3MM SMT ELE
R39
7676 W100 2K0 1% 0805 SMT RES
C6
5979 100N 50V 5%CAP 0805 SMT X7R
R40
4967 W125 39K2 1% 0805 SMT RES
C7
7735 __4U7 50V 10%CAP 1210 SMT CER
R41
8274 W125 6K20 1% 0805 SMT RES
C8
7601
220N 50V 10%CAP 1206 SMT X7R
R42
7683 W100 20K0 1% 0805 SMT RES
C9
5979 100N 50V 5%CAP 0805 SMT X7R
R43
7863 W125 33K 5% 0805 SMT RES
C10
7736 470N 50V 5%CAP 1206 SMT X7R
R44
7651 W250 1M0 1% 1206 SMT RES
C11
7733 __4N7 50V 10%CAP 0805 SMT X7R
R45
4952
W125 10K2 1% 0805 SMT RES
C12
8009 _82N 100V 10%CAP 0805 SMT X7R
R46
7622 W100 1M0 1% 0805 SMT RES
C13
7736 470N 50V 5%CAP 1206 SMT X7R
R47
7651 W250 1M0 1% 1206 SMT RES
C14
5979 100N 50V 5%CAP 0805 SMT X7R
R48
5066 W125 22K1 1% 0805 SMT RES
C15
7880 _47U 35V 20%CAP 6.3MM SMT ELE
R49
7863 W125 33K 5% 0805 SMT RES
C16
7799
__5N6 50V 5%CAP 0805 SMT C0G
R50
7622 W100 1M0 1% 0805 SMT RES
C17
7738 _10U0 16V 10%CAP 1206 SMT X7R
R51
7626 W100 100K0 1% 0805 SMT RES
C18
7813 _47P 50V 5%CAP 0805 SMT NPO
R52
7621 W100 1K0 1% 0805 SMT RES
C19
5983 _68P 50V 5%CAP 0805 SMT C0G
R53
7625 W100 10K0 1% 0805 SMT RES
C20
5979 100N 50V 5%CAP 0805 SMT X7R
R55
7621 W100 1K0 1% 0805 SMT RES
C21
7693 __1N 50V 5%CAP 0805 SMT NPO
R56
7823 W100 18K2 1% 0805 SMT RES
C22
8010 _33P 100V 5%CAP 0603 SMT C0G
R57
5066 W125 22K1 1% 0805 SMT RES
C23
8272 220P 100V 10%CAP 0805 SMT X7R
R58
8274 W125 6K20 1% 0805 SMT RES
C25
7811 100U 25V 20%CAP 8X5.4 SMT ELE
R59
7622 W100 1M0 1% 0805 SMT RES
C27
5979 100N 50V 5%CAP 0805 SMT X7R
R61
7642 W100 4K75 1% 0805 SMT RES
C29
7931 270P 50V 5%CAP 0805 SMT NPO
R62
8103 W125 120K 1% 0805 SMT RES
C31
7735 __4U7 50V 10%CAP 1210 SMT CER
R63
7625 W100 10K0 1% 0805 SMT RES
C32
5979 100N 50V 5%CAP 0805 SMT X7R
R65
7852
W250 10R 5% 1206 SMT RES
C33
7693 __1N 50V 5%CAP 0805 SMT NPO
R66
7625 W100 10K0 1% 0805 SMT RES
C35
7741 __2N2 50V 10%CAP 0805 SMT X7R
R67
7625 W100 10K0 1% 0805 SMT RES
C36
7927 100P 50V 10%CAP 0805 SMT NPO
R68
7900 W125 30K 0.5% 0805 SMT RES
C47
5979 100N 50V 5%CAP 0805 SMT X7R
R69
5087 W125 5K23 1% 0805 SMT RES
D1
7750 CDSF4148 75V 0A15 1005 SMT
R70
7628
W100 15K0 1% 0805 SMT RES
D2
7750 CDSF4148 75V 0A15 1005 SMT
R72
7631 W100 2K21 1% 0805 SMT RES
D4
6657 B160-13-F 60V 1A0 SCH DO214AC SMT
R81
7670 W125 47R5 1% 0805 SMT RES
D5
7742 B0540 SOD123 SMT SCHTKY
U1
7987 UCC25600 RES MODE CTRL SMT SO8
D7
7750 CDSF4148 75V 0A15 1005 SMT
U2
7659 LM339M QUAD SS COMP SMT SO-14
D21
7750 CDSF4148 75V 0A15 1005 SMT
U3
6652 MIC4424YM DUAL MOSFET DRVR SMT S08
HD1
4214 08 CIR DUAL ROW HDR HT 0.1 RA SMT
U4
6799 NCP1605A HIV PFC CNTRL SMT IC SO16
HD2
4214 08 CIR DUAL ROW HDR HT 0.1 RA SMT
U5
7662 LM358D DUAL SS OPAMP SMT SO-8
HD3
4213 04 CIR DUAL ROW HDR HT 0.1 RA SMT
U6
7661 LM393D DUAL COMPARATOR SMT SO-8
PCB
M1632BLANK 2_OZ 2SD 46.6 SQIN 08PER PFC PS
Q1
7837 MMBT5401 PNP SOT-23 SMT
Q4
6977 FDT3612 NCH MFET SOT-223 SMT
Q5
7986 2N7002 NCH FET SOT-23 SMT T&R
Q6
7720 TL431A 3 TERM ADJ VREG SMT SOT-23
Q13
7986 2N7002 NCH FET SOT-23 SMT T&R
R1
5082 W125 1K27 1% 0805 SMT RES
R2
5085 W125 16K9 1% 0805 SMT RES
R3
7675 W125 1K21 1% 0805 SMT RES
R4
7683 W100 20K0 1% 0805 SMT RES
R5
5086 W125 26K7 1% 0805 SMT RES
R6
5067 W125 31K6 0.1% 0805 SMT RES
R7
7651 W250 1M0 1% 1206 SMT RES
R8
7636 W100 27K4 1% 0805 SMT RES
R9
7625 W100 10K0 1% 0805 SMT RES
R10
8053 W100 150R 5% 0805 SMT RES
R11
7683 W100 20K0 1% 0805 SMT RES
R12
5066 W125 22K1 1% 0805 SMT RES
R13
7682 W125 17K8 1% 0805 SMT RES
R14
7899 W125 1K800 0.1% 0805 SMT RES
R15
7651 W250 1M0 1% 1206 SMT RES
R16
7651 W250 1M0 1% 1206 SMT RES
R17
7651 W250 1M0 1% 1206 SMT RES
R18
7651 W250 1M0 1% 1206 SMT RES
R19
8274 W125 6K20 1% 0805 SMT RES
R20
7682 W125 17K8 1% 0805 SMT RES
R21
7651 W250 1M0 1% 1206 SMT RES
R22
8181 W125 5K6 1% 0805 SMT RES
R23
7625 W100 10K0 1% 0805 SMT RES
R25
7686 W100 274K 1% 0805 SMT RES
R26
5075 W125 24K9 1% 0805 SMT RES
R27
5088 W125 49K9 1% 0805 SMT RES
R28
7686 W100 274K 1% 0805 SMT RES
R29
7625 W100 10K0 1% 0805 SMT RES
R30
7651 W250 1M0 1% 1206 SMT RES
R31
7679 W100 4K99 1% 0805 SMT RES
R32
7679 W100 4K99 1% 0805 SMT RES
R33
7930 W250 22R 5% 1206 SMT RES
R34
5083 W125 23K2 1% 0805 SMT RES
M1637 Parts Reference List 11/1/2018
REF YS # Description REF YS #
Description REF YS # Description
AI-ASS
M1637-59 M1637 PFC 300W@24V SWITCHING PS
R157
7637
W125 3K32 1% 0805 SMT RES
C1
5193 470N 305V 10%CAP BLK RAD POLY FLM
R263
7852 W250 10R 5% 1206 SMT RES
C2
5218 _10N 1600VDC 5%CAP BLK RAD POLY FLM
SCR1
8742 4-40X3/8 PAN PH TAPTITE BO&W
C3
5193 470N 305V 10%CAP BLK RAD POLY FLM
SCR2
8742 4-40X3/8 PAN PH TAPTITE BO&W
C4
5193 470N 305V 10%CAP BLK RAD POLY FLM
SCR3
8742 4-40X3/8 PAN PH TAPTITE BO&W
C5
5193 470N 305V 10%CAP BLK RAD POLY FLM
T1
1256
XFMR O/P 300W +/-24V PQ43230
C6
5531 150U 450V 20%CAP BLK 25X32MM ELS
T3
8188 XF3955 GATE DRIVE XFMR SMT
C7
5218 _10N 1600VDC 5%CAP BLK RAD POLY FLM
U202
8158 LNK306G OFFLINE SWITCH SMT SMD8B
C8
7873 __4N7 50V 5%CAP 1206 SMT NPO
W1
4225 2 PIN LOCK HEADER .312" VERT TIN
C9
5842 _27N 400V 5%CAP BLK RAD POLY FLM
W2
2396
2 CIR PH-HEADER 2MM
C10
5827 150N 250V 20%CAP BLK 'X2' 15MM AC
W6
4164 2 PIN .2 POWER PIN HEADER RA
C11
6545 __1N 250V 20%CAP BLK 'Y' 10MM AC
ZD201
8159 SMAZ18-13-F 18V0 1W0 5% SMT ZEN
C12
6545 __1N 250V 20%CAP BLK 'Y' 10MM AC
C13
5267 100U 25V 20%CAP T&R RAD .2EL
C14
7880 _47U 35V 20%CAP 6.3MM SMT ELE
C28
7693 __1N 50V 5%CAP 0805 SMT NPO
C30
7693 __1N 50V 5%CAP 0805 SMT NPO
C34
7735 __4U7 50V 10%CAP 1210 SMT CER
C37
6545 __1N 250V 20%CAP BLK 'Y' 10MM AC
C38
6545 __1N 250V 20%CAP BLK 'Y' 10MM AC
C39
5864 1000U 35V 20%CAP BLK 12X25MM EL
C40
5864 1000U 35V 20%CAP BLK 12X25MM EL
C72
7738 _10U0 16V 10%CAP 1206 SMT X7R
C125
5217 _22N 560V 10%CAP BLK RAD POLY FLM
C220
5979 100N 50V 5%CAP 0805 SMT X7R
C221
7735 __4U7 50V 10%CAP 1210 SMT CER
D1
5127 1N5406 600V 3A0 DIODE
D5
8130 MURS120T3 200V 1A DIO DO214AA SMT
D6
8130 MURS120T3 200V 1A DIO DO214AA SMT
D10
6682 BRIDGE GBU406 4A 600V WIRE LEAD SIP
D11
7750 CDSF4148 75V 0A15 1005 SMT
D12
7750 CDSF4148 75V 0A15 1005 SMT
D36
8085 ES1H 500V 1A0 D214 UPGT 8814
D206
6300 MURA260T3 600V 2A DIO 403D SMT
D207
6300 MURA260T3 600V 2A DIO 403D SMT
F1
2494 FUSE 5A0 250V TIME DELAY T&R
F2
2494 FUSE 5A0 250V TIME DELAY T&R
HS1
1669 M1637 HEATSINK RIVETED
HS2
4181 TO220 THERMO PAD CERAMIC .080 THK
HS3
4181 TO220 THERMO PAD CERAMIC .080 THK
HW1
8667 .229X1/8L SHOULDER WASHER
HW2
8667 .229X1/8L SHOULDER WASHER
HW3
9067 1/8X5/16XID.64 NYLON SPACER
HW4
9067 1/8X5/16XID.64 NYLON SPACER
HW5
8682 #4 .125IDX.281ODX.031 TEFLON WASHER
K1
3105 RELAY 1C 10AMP DC12 030MA PC-C
L1
1259 1280UH GATE DRV XFMR PC MNT
L2
6581 COMMON MODE CHOKE 5MH
L3
3310 54.3UH COIL 0R03 20T 17GA/LTZ GAPD
L4
3309 42.7UH COIL 0R17 70T 24GA TOR VMNT
L5
3308 45UH COIL 0R7 35T 22GA TOROID VMNT
L6
6581 COMMON MODE CHOKE 5MH
L7
7941 __8.2UH COIL 1210 SMT
L219
7974 1000UH 10% COIL 12MM SMT
M1632
M1632 PS PFC FAN CNTRL PCB
M1636
M1636 PS PFC SW MODULE PCB
PCB1
M1637BLANK 2_OZ 2SD 56.1 SQIN 02PER LED PS
Q2
6725 PSMN017-80PS TO220 NCH MFET TM
Q3
6725 PSMN017-80PS TO220 NCH MFET TM
R1
8257 W125 11K0 1% 0805 SMT RES
R2
6622 10R 20% THERMISTOR NTC
R3
8134 FREE PART NUMBER
R4
8134 FREE PART NUMBER
R5
7651 W250 1M0 1% 1206 SMT RES
R6
7651 W250 1M0 1% 1206 SMT RES
R7
7759 W250 100K 5% 1206 SMT RES
R8
7759 W250 100K 5% 1206 SMT RES
R9
7759 W250 100K 5% 1206 SMT RES
R10
7759 W250 100K 5% 1206 SMT RES
R11
7759 W250 100K 5% 1206 SMT RES
R12
7759 W250 100K 5% 1206 SMT RES
R36
7867 W500 2K2 5% 2010 SMT RES
R37
7854 W125 47R 5% 0805 SMT RES
R39
7930 W250 22R 5% 1206 SMT RES
R40
7930 W250 22R 5% 1206 SMT RES
R41
5070 2W00 0R05 1% OARS SMT RES
R42
7854 W125 47R 5% 0805 SMT RES
R43
8183 1W00 2R0 1% 2512 SMT RES
R46
8183 1W00 2R0 1% 2512 SMT RES
R93
8137 W125 1K62 1% 0805 SMT RES
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
17
K K
J J
I I
H H
G G
F F
E E
D D
C C
B B
A A
Product(s):
M1486 1 2Sheet OfPCB#: Rev#: V02
Short Description Of The ProductDescription:
LP-LED4X
Yorkville Sound Ltd.
550 Granite Court
Pickering, ON
Canada L1W 3Y8
www.yorkville.com
EML Rev#: XX
LED_POD_SCH.SchDocModified: File:2020-01-30 Tmp Rev: V031
TOP LEVEL SHEET
W500
0R1
1206
R2
2912
L3
403D
A340
D1
SOT23-5
AL8805
6653
CTRL
SWGND
SET
VIN
U1
7732
220UH
L8
470N
1206
50V
C9
470N
1206
50V
C10
W250
1R0
1206
R13
W125
10R0
0805
R9
W125
100K
0805
R12
1K
1W00
2512
R10
10K
W125
0805
R11
1K0
W100
0805
R8
1N
0805
50V
C11
SOD-123
3V6
D6
0R
W250
R1
5919
R
LD1:1
5919
G
LD1:2
5919
B
LD1:3
5919
W
LD1:4
5919
9
LD1:5
1206
50V
1U
C2
5919
R
LD2:1
5919
G
LD2:2
5919
B
LD2:3
5919
W
LD2:4
5919
R
LD3:1
5919
G
LD3:2
5919
B
LD3:3
5919
W
LD3:4
5919
R
LD4:1
5919
G
LD4:2
5919
B
LD4:3
5919
W
LD4:4
5919
9
LD2:5
5919
9
LD3:5
5919
9
LD4:5
VCC
GND
W500
0R1
1206
R23
2912
L4
403D
A340
D3
SOT23-5
AL8805
6653
CTRL
SWGND
SET
VIN
U3
1206
50V
1U
C4
VCC
GND
W500
0R1
1206
R4
2912
L6
403D
A340
D4
SOT23-5
AL8805
6653
CTRL
SWGND
SET
VIN
U4
1206
50V
1U
C6
VCC
GND
W500
0R1
1206
R6
2912
L7
403D
A340
D5
SOT23-5
AL8805
6653
CTRL
SWGND
SET
VIN
U5
1206
50V
1U
C8
VCC
GND
1206
25V1U
C13
1206
25V 1U
C17
1206
50V
1U
C18
100N
1206
250V
C16
100N
0805
50V
C21
100N
0805
50V
C3
100N
0805
50V
C19
100N
0805
50V
C12
VCC
GND
4 PIN MICRO MATE
CONNECTOR
DATA IN
VCC
GND
GND
1U
1206
50V
C1
+24V
GND
0R
W250
R25
0R
W250
R5
W063
R35
10K
SOT-23
5V1
D7
W250
100R
1206
R15
W125
10K
0805
R14
+5V
GND
SMT
IN OUT
MC78L05
U6
VCC
GND
100N
0805
50V
C20
+5V
W250
0R
R16
VCC
VCC
0R
W250
R24
W250
0R
R17
W250
0R
R18
W250
0R
R44
W250
0R
R45
W250
0R
R46
GND GND
0R
W250
R26
0R
W250
R3
GND
GND
+5V
+5V
P15(2)
P15(3)
P15(2)
0R
W250
R38
W250
0R
R43
0R
W250
R7
W250
0R
R19
1
10W3:1
2
10 W3:2
3
10W3:3
4
10 W3:4
5
10W3:5
6
10 W3:6
7
10W3:7
8
10 W3:8
9
10W3:9
10
10 W3:10
W250
0R
R30
W250
0R
R39
SSOP-48
CY8C32 6654
P12[2]
1
P12[3]
2
P0[0]
3
P0[1]
4
P0[2]
5
P0[3]
6
VDDIO0
7
P0[4]
8
P0[5]
9
P0[6]
10
P0[7]
11
VCCD
12
VSSD
13
VDDD
14
P2[3]
15
P2[4]
16
VDDIO2
17
P2[5]
18
P2[6]
19
P2[7]
20
VSSB
21
IND
22
VBOOST
23
VBAT
24
P1[0]
25
P1[1]
26
P1[2]
27
P1[3]
28
P1[4]
29
P1[5]
30
VDDIO1
31
P1[6]
32
P1[7]
33
P15[6]
34
P15[7]
35
VDDD
36
VSSD
37
VCCD
38
P15[0]
39
P15[1]
40
VDDIO3
41
P12[0]
42
P12[1]
43
P15[2]
44
P15[3]
45
VCCA
46
VSSA
47
VDDA
48
U2
GND
+5V
+5V
GND
GND
GND
+5V
1206
25V1U
C14
1206
25V1U
C23
GND
GND
GND
+5V
VCCD
VCCD
GND
GND
+5V
GND
+5V
GND
W250
0R
R22
TP3
TP2
W750
0R
2010
R33
P0(4)
P0(5)
P0(4)
P0(5)
P15(3)
W250
0R
R51
W250
0R
R34
P12(0)
P12(0)
W250
0R
R31
0R
W250
R27
0R
W250
R36
0R
W250
R29
INPUT/POWER
FAN
THERM
PROGRAM HEADER
RED LED DRIVER
GREEN LED DRIVER
BLUE LED DRIVER
WHITE LED DRIVER
PROGRAM HEADER
+5V SUPPLY
2 PIN MALE HEADER
W125
10K
0805
R50
GND
W125
10K
0805
R49
GND
W125
10K
0805
R48
GND
W125
10K
0805
R47
GND
VCC
1
4
W1:1
2
4
W1:2
3
4
W1:3
4
4
W1:4
5
4
W1:5
0R
W250
R40
0R
W250
R41
0R
W250
R42
0R
W250
R28
FAN CONTROL PIN 10 U2
W250
0R
R32
100N
0805
50V
C5
0R
W250
R52
SPRKGAP
SG1
GND
1
4219
W2:1
2
4219
W2:2
0R8
0A2
R20
SOT323
2
1
3
SI1308EDL
8276
S
D
G
Q1
DO214AC
B160
D2
PTC FOR SHORT PROTECTION
FAN
FAN
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
17
K K
J J
I I
H H
G G
F F
E E
D D
C C
B B
A A
Design Information And History
Section:
Product(s):
History.SchDoc
M1486 3 *Sheet OfPCB#: Rev#:
Modified:
V02
File:2020-01-30
LP-LED4X
EML Rev#: XX
Tmp Rev: V031
CHANGE HISTORY POTENTIOMETERS AND KNOBS
PINOUT DIAGRAMS
DESIGN HISTORY AND INFORMATION
THIS SHEET CONTAINS A CHANGE HISTORY LOG, A LIST OF THE POTS & KNOBS AND A LEADS & PINS REFERENCE SECTION.
.V01 RELEASED FOR PRODUTION
Implemented PC9393 on board.
.
.
.
.
.
.
.
.
.
.
.
V02
.
.
.
.
.
.
.
.
.
.
.
20-NOV-2016
13
10
7
4
1
9
11
12
8
#
2
3
5
6
VER#DATE DESCRIPTION OF CHANGE
.
.
.
.
.
.
.
.
.
04-FEB-2020
.
.
PC#
9393
.
.
.
.
.
.
.
.
.
.
.
.. .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
13
10
7
4
1
9
11
12
8
#
2
3
5
6
VER#DATE DESCRIPTION OF CHANGE
.
.
.
.
.
.
.
.
.
.
.
.
PC#
.
.
.
.
.
.
.
.
.
.
.
.
.. .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
13
10
7
4
1
9
11
12
8
#
2
3
5
6
VER#DATE DESCRIPTION OF CHANGE
.
.
.
.
.
.
.
.
.
.
.
.
PC#
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
..
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
REF POT#FUNCTION KNOB#
POTENTIOMETERS AND KNOBS
.
.
.
.
.
.
.
.
.
.
.
.. .
.
.
.
.
.
.
.
.
.
1
Q1
ESD
DRIVER
U5
C
R19
C2
R5
L3
R7
C13
W1
D3
1 of
R10
D6
R11
C14
C11
W2
C9
R13
R14
TP3
C10
D1
BLU LEDS
L7
R45
R29
D5
C5
L6
R49
U4
R38
W3
L4
C3
R31
U2
R48
C17
C1
R24
C4
R41
R42
R28
R8
C23
R22
C16
F A N
LD3
R18 R44
2015
R1
R33
L8
R51
R20
D2
R9
R12
R34
C20
U6
#4 GND SCREW
C 8
R 5 0
R47
R6
SG1
R39
C18
SINGLE LAYER
1.5mm ALUMINUM
2 OZ.PCB
R36
RED LEDS DRIVER
R30
SPRK GAP
R16 R17
R43
C12
#4 GND
YS#8826
R3
R27
M1486
U1
R2
U3
D4
R4
C6
R46
LD1
LABEL
S/N
V02
R26
Yorkville
R25
R40
LD2
R15
C19
R35
D7
TP2
R32
LD4
C21
R23
R52
P.C.B.S.A.
WHT LEDS DRIVER
GRN LEDS DRIVER
THERM. SENSE
LP-LED4X
INTO HEATSINK
e
LED POD PCB
#6 SCREW
R
B
B
G
G
R
1
2
R
G
R
W
W
B
B
G
W
TP
TP
W
5919
5919
4 2 1 9
7752
5919
8214
7994
5919
SEE NOTE 1.
6654
1U
0R
0R
0R
10K
0R1
AL8805
0R
10K
1U
3V6
C
8276
AL8805
1U
100R
1U
0R
1U
AL8805
0R
1U
0R
0R
0R 0R
0R 0R
0R
0R
0R
12UH
A340
12UH
0R
0R
0R1
0R
100N
0R
10K
0R1
1U
0R
1U 1U
1K
0R
10K
2016
1N
0R
10K
5V1
0R
TP
0R
1U
100N
12UH
A340
10K
100N
100N
0R
TP
0A2
10K
1R0
0R
A340
AL8805
0R1
100N
0R
1K0
470N
220UH
B160
470N
MC78L05
A340
12UH
0R
Yorkville
0R
0R
0R
0R
10R0
100K
100N
CY8C32
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
17
K K
J J
I I
H H
G G
F F
E E
D D
C C
B B
A A
Assembly Documentation
Section:
Product(s):
Assembly.SchDoc
M1486 2 14Sheet OfPCB#: Rev#:
Modified:
V02
File:2020-01-30
LP-LED4X
EML Rev#: XX
Tmp Rev: V031
THIS SHEET CONTAINS SPECIAL PRODUCTION NOTES AND A LIST OF PCB HARDWARE PARTS REQUIRED FOR THE BUILD.
SCREWS AND BOLTS STANDOFFSNUTS
PCB HARDWARE
SPECIAL PRODUCTION NOTES
MISCELLANEOUS
PCB ASSEMBLY DOCUMENTATION
1. BEFORE PIZZA CUTTING PANEL, FASTEN 6 YS SCREWS #8826 AND WASHERS YS #8925 IN
LOCATIONS INDICATED ON THE 6 PCBS IN THE PANEL.
2. THEN PIZZA CUT PANEL ALONG SCORE LINES.
SCR1
8826
SCR2
8826
SCR3
8826
SCR4
8826
SCR5
8826
SCR6
8826
WSHR1
8925
WSHR2
8925
WSHR3
8925
WSHR4
8925
WSHR5
8925
WSHR6
8925
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
17
K K
J J
I I
H H
G G
F F
E E
D D
C C
B B
A A
Design Information And History
Section:
Product(s):
History.SchDoc
M1486 3 *Sheet OfPCB#: Rev#:
Modified:
V02
File:2020-01-30
LP-LED4X
EML Rev#: XX
Tmp Rev: V031
CHANGE HISTORY POTENTIOMETERS AND KNOBS
PINOUT DIAGRAMS
DESIGN HISTORY AND INFORMATION
THIS SHEET CONTAINS A CHANGE HISTORY LOG, A LIST OF THE POTS & KNOBS AND A LEADS & PINS REFERENCE SECTION.
.V01 RELEASED FOR PRODUTION
Implemented PC9393 on board.
.
.
.
.
.
.
.
.
.
.
.
V02
.
.
.
.
.
.
.
.
.
.
.
20-NOV-2016
13
10
7
4
1
9
11
12
8
#
2
3
5
6
VER#DATE DESCRIPTION OF CHANGE
.
.
.
.
.
.
.
.
.
04-FEB-2020
.
.
PC#
9393
.
.
.
.
.
.
.
.
.
.
.
.. .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
13
10
7
4
1
9
11
12
8
#
2
3
5
6
VER#DATE DESCRIPTION OF CHANGE
.
.
.
.
.
.
.
.
.
.
.
.
PC#
.
.
.
.
.
.
.
.
.
.
.
.
.. .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
13
10
7
4
1
9
11
12
8
#
2
3
5
6
VER#DATE DESCRIPTION OF CHANGE
.
.
.
.
.
.
.
.
.
.
.
.
PC#
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
..
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
REF POT#FUNCTION KNOB#
POTENTIOMETERS AND KNOBS
.
.
.
.
.
.
.
.
.
.
.
.. .
.
.
.
.
.
.
.
.
.
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
17
K K
J J
I I
H H
G G
F F
E E
D D
C C
B B
A A
Product(s):
M1487 1 *Sheet OfPCB#: Rev#: V06
Controller DSP for Lght BarsDescription:
LP-LED4X
Yorkville Sound Ltd.
550 Granite Court
Pickering, ON
Canada L1W 3Y8
www.yorkville.com
EML Rev#: XX
Top Sheet.SchDocModified: File:2019-11-08 Tmp Rev: V031
TOP LEVEL SHEET
LQFP-100
6656
MK10DX128VLL7
PTC10
82
PTE0/UART1_TX
1
PTC18
92
ADC0_DP1
14
PTB21
67
PTB20
66
PTC17
91
PTA3/JTAG_TMS/SWD_DIO
37
PTC9
81
PTA0/JTAG_TCLK/SWD_CLK
34
PTE2/SPI1_SCK
3
VBAT
30
EXTAL32
29
XTAL32
28
DAC0_OUT
27
PTB2
55
VDD
8
PTD5
98
PTB17
63
PTD3
96
PTC0
70
VREFH
23
VDDA
22
PTC13
85
PTC11
83
PTC6
78
PTC7
79
PTC14
86
PTC12
84
VSS
88
PTD1
94
VDD
89
PTC16
90
PTC4
76
VDD
75
VSS
74
PTC1
71
PTC3
73
VSS
49
VDD
48
PTA19
51
PTA18
50
PTB1
54
PTB0
53
PTA14
44
PTA15
45
ADC1_DP1
16
PGA1_DP
20
PGA1_DM
21
PGA0_DM
19
PGA0_DP
18
VDD
61
PTB16
62
PTA12
42
PTE19
13
PTE4
5
PTB10/UART3_RX
58
PTB11/SPI1_SCK/UART3_TX
59
PTB18
64
PTB3
56
PTB22
68
PTB23
69
VDD
40
VSS
41
PTE18
12
VSS
9
PTE16/UART2_TX
10
PTD6
99
PTE26
33
PTE25/UART4_RX
32
VREF_OUT
26
PTE24/UART4_TX
31
PTE3
4
PTE6
7
PTD4
97
PTD2
95
PTC5
77
PTC8
80
PTC2
72
PTC15
87
PTD0
93
PTA16
46
RESET_b
52
PTA17
47
PTA13
43
VSSA
25
ADC0_DM1
15
VREFL
24
PTA2/UART0_TX
36
PTE1/SPI1_SOUT/UART1_RX
2
ADC1_DM1
17
PTE5
6
VSS
60
PTA1/UART0_RX
35
PTB19
65
PTB9/SPI1_PCS1
57
PTE17/UART2_RX
11
PTA5
39
PTA4
38
PTD7
100
U1
6
2
3
5
1
4
COM
ROT
.
4969
P1
6
2
3
5
1
4
COM
ROT
.
4969
P5
6
2
3
5
1
4
COM
ROT
.
4969
P3
6
2
3
5
1
4
COM
ROT
.
4969
P4
25V
1206
1U
C1
+3V3
DGGND
ROT
.
4969
6
2
3
5
1
4
COM
P2
1206
25V1U
C2
100N
0805
50V
C3
+3V3
DGGND
+3V3BLU
DGNDBLU
1206
25V 1U
C27
1206
25V 1U
C33
100N
0805
50V
C28
100N
0805
50V
C32
UART3_RX
UART3_TX
1206
25V 1U
C29
W125
47R
0805
R14
W125
47R
0805
R15
10
1
W2:1
10
2
W2:2
10
3
W2:3
10
4
W2:4
10
5
W2:5
10
7
W2:7
10
9
W2:9
10
10
W2:10
+3V3BLU
DGNDBLU
BLUE PROGRAM
HEADER
TB
Lin
10K
.
4526
P8
TB
Lin
10K
.
4526
P7
TB
Lin
10K
.
4526
P6
12 POS DIP SW
4193
21
43
65
87
109
1211
1413
1615
1817
2019
2221
2423
1
2
3
4
5
6
7
8
9
10
11
12
S1
100N
0805
50V
C7 100N
0805
50V
C8
100N
0805
50V
C9
POTGND
+3V3POT
DGGND
DGGND
S
D
G
SO8
7743
FDFS6N754
4
3 6
2 781
5
Q1
470N
1206
50V
C11
470N
1206
50V
C10
W250
1R0
1206
R13
W125
10R0
0805
R9
W125
100K
0805
R12
+24V
GND
FAN
2 PIN MALE HEADER
FTM1_CH0
W250
0R
R37
CH #1 CH #2
CH #3 CH #4FUNCTION
50V
100N
0805
C42
+3V3
DGGND
50V
100N
0805
C43
+3V3
DGGND
1206
25V1U
C48
SO8
MC33063A
7719
INV
5
ISEN
7
DRV_C
8
SW_E
2
SW_C
1
VCC
6
TCAP
3
GND
4
U2
0805
50V
330P
C5
ELE 8mm
25V100U
C55
ELE 8mm
6V3680U
C6
W125
3K01
0805
R2
W125
1K21
0805
R3
W250
2R4
1206
R1
DO214AC
B160-13-F
D1
220UH
8152
L7
GND
GND
GND
GND
+3.3V SUPPLY
STEP DOWN
CONVERTER
+24V
FOR U1 DSP
50V
100N
0805
C44
+3V3
DGGND
1206
25V1U
C45
50V
100N
0805
C47
+3V3
DGGND
1206
25V1U
C46
2
10W10:2
3
10 W10:3
4
10W10:4
5
10 W10:5
6
10W10:6
7
10 W10:7
8
10W10:8
9
10 W10:9
10
10W10:10
1
10 W10:1
FROM XLR CONTROL
HEADER
UART0_RX
UART0_TX
ANALOG AUDIO
AN0
AN1
AN0
AN1
SPI1_SOUT
SPI1_SCK
UART1_TX
TO DEMULTIPLEXER
UART0_TX
UART0_RX
SPI1_PCS1
TO DIGITAL POT U8
SPI1_PCS1
TO DIGITAL POT U9
SPI1_SCK
RESET
PROGRAM
+3V3
DGGND
SWD_CLK
SWD_DIO
UART2_RX
UART2_RX
FROM DMX INPUTS
FTM0_CH2
PTB19
PTB18
PTB19
PTB18
TO DEMULTIPLEXER
8200NH
21
L6
100N
0805
50V
C4
10U
0805
10V
C54
+3V3 +3V3POT
POTGND
+3V3POT
DGGND
+3V3
DGGND
COLOR ADJUST
LED LEVEL
EXTERIA STATE SENCE
6
6
W3:6
6
5
W3:5
6
3
W3:3
6
4
W3:4
+3V3 +3V3_INBLU
DGGND DGNDBLU
GRN
.
6408
LD1
W250
100R
1206
R55
+3V3
DGGND
POWER LED
+24V
CON_HOLE_125
1
HC2
CON_HOLE_125
1
HC1
DGGND GND
DGGND
DGGNDGND
GND POTGND
0
1
2
COM
3
ROT H
.
4527
P9:1
ROT H
.
4527
P9:2
TP1
TP2
TP PIN31
TP PIN33
GND
+3V3
NetU1_31
NetU1_32
10U
Elec
16V
C62
FTM1_CH0
BLU_TX
BLU_RX
BLU_RESET
+3V3_INBLU
F0805
600R
L1
6
6 W1:6
5
6 W1:5
3
6 W1:3
4
6 W1:4
TO92
IN
GND
OUT
LP2950-33
7012
U16
GND
50V
100N
0805
C71
+3V3
7974
1000UH
L8
TP5
GND TEST PT
TO START
PCB TESTING
NetU1_33
14X19mm SMT Module
CYBLE-012011-00
6793
GND
27
GND
26
GND
25
P0.6
24
P0.7
23
P0.5
22
P0.4
21
P2.3
12
VDD
15
P1.7
16
VREF
10
P2.6
9
P3.2
8
P3.3
7
P2.0
14
P1.4
19
P2.2
13
P2.4
11
P1.6
17
P1.5
18
GND
28
VDDR
29
P3.4
6
P3.5
5
P5.1
31
P1.0
20
XRES
1
P5.0
30
P3.6
4
P3.7
3
P4.0
2
U4
GND
N1
N3
N5
N7
N2
N4
N6
N8
N10
N9
N11
1
2 W11:1
2
2 W11:2
SPI1_SOUT
PIC101
PIC102
COC1
PIC201
PIC202
COC2
PIC301
PIC302
COC3
PIC401
PIC402
COC4
PIC501
PIC502
COC5
PIC601
PIC602
COC6
PIC701
PIC702
COC7
PIC801
PIC802
COC8
PIC901
PIC902
COC9
PIC1001
PIC1002
COC10
PIC1101
PIC1102
COC11
PIC2701
PIC2702
COC27
PIC2801
PIC2802
COC28
PIC2901
PIC2902
COC29
PIC3201
PIC3202
COC32
PIC3301
PIC3302
COC33
PIC4201
PIC4202
COC42
PIC4301
PIC4302
COC43
PIC4401
PIC4402
COC44
PIC4501
PIC4502
COC45
PIC4601
PIC4602
COC46
PIC4701
PIC4702
COC47
PIC4801
PIC4802
COC48
PIC5401
PIC5402
COC54
PIC5501
PIC5502
COC55
PIC6201
PIC6202
COC62
PIC7101
PIC7102
COC71
PID101
PID102
COD1
PIHC101
COHC1
PIHC201
COHC2
PIL101
PIL102
COL1
PIL601
PIL602
COL6
PIL701
PIL702
COL7
PIL801
PIL802
COL8
PILD101
PILD102
COLD1
PIN101
CON1
PIN201
CON2
PIN301
CON3
PIN401
CON4
PIN501
CON5
PIN601
CON6
PIN701
CON7
PIN801
CON8
PIN901
CON9
PIN1001
CON10
PIN1101
CON11
PIP101 PIP102 PIP103 PIP104 PIP105
PIP106
PIP107
COP1
PIP201 PIP202 PIP203 PIP204 PIP205
PIP206
PIP207
COP2
PIP301 PIP302 PIP303 PIP304 PIP305
PIP306
PIP307
COP3
PIP401
PIP402 PIP403
PIP404 PIP405
PIP406
PIP407
COP4
PIP501
PIP502 PIP503 PIP504
PIP505
PIP506
PIP507
COP5
PIP601
PIP602
PIP603
COP6
PIP701
PIP702
PIP703
COP7
PIP801
PIP802
PIP803
COP8
PIP901
PIP902
PIP903
PIP904
PIP905
COP9:1
PIP906
COP9:2
PIQ101 PIQ102
PIQ103
PIQ104
PIQ105 PIQ106
PIQ107 PIQ108
COQ1
PIR101
PIR102
COR1
PIR201
PIR202
COR2
PIR301
PIR302
COR3
PIR901
PIR902
COR9
PIR1201
PIR1202
COR12
PIR1301
PIR1302
COR13
PIR1401
PIR1402
COR14
PIR1501
PIR1502
COR15
PIR3701
COR37
PIR5501
PIR5502
COR55
PIR6001
PIR6002
COR60
PIR6101 PIR6102
COR61
PIS101
PIS102
PIS103
PIS104
PIS105
PIS106
PIS107
PIS108
PIS109
PIS1010
PIS1011
PIS1012
PIS1013
PIS1014
PIS1015
PIS1016
PIS1017
PIS1018
PIS1019
PIS1020
PIS1021
PIS1022
PIS1023
PIS1024
COS1
PITP101
COTP1
PITP201
COTP2
PITP501
COTP5
PIU101
PIU102
PIU103
PIU104
PIU105
PIU106
PIU107
PIU108
PIU109
PIU1010
PIU1011
PIU1012
PIU1013
PIU1014
PIU1015
PIU1016
PIU1017
PIU1018
PIU1019
PIU1020
PIU1021
PIU1022
PIU1023
PIU1024
PIU1025
PIU1026 PIU1027 PIU1028 PIU1029
PIU1030 PIU1031 PIU1032
PIU1033 PIU1034 PIU1035 PIU1036 PIU1037 PIU1038 PIU1039 PIU1040
PIU1041 PIU1042 PIU1043
PIU1044 PIU1045 PIU1046 PIU1047 PIU1048 PIU1049 PIU1050
PIU1051
PIU1052
PIU1053
PIU1054
PIU1055
PIU1056
PIU1057
PIU1058
PIU1059
PIU1060
PIU1061
PIU1062
PIU1063
PIU1064
PIU1065
PIU1066
PIU1067
PIU1068
PIU1069
PIU1070
PIU1071
PIU1072
PIU1073
PIU1074
PIU1075
PIU1076 PIU1077 PIU1078 PIU1079 PIU1080 PIU1081 PIU1082
PIU1083 PIU1084 PIU1085
PIU1086 PIU1087 PIU1088 PIU1089 PIU1090 PIU1091 PIU1092 PIU1093
PIU1094 PIU1095 PIU1096
PIU1097 PIU1098 PIU1099
PIU10100
COU1
PIU201
PIU202
PIU203
PIU204
PIU205
PIU206
PIU207
PIU208
COU2
PIU401
PIU402
PIU403
PIU404
PIU405
PIU406
PIU407
PIU408
PIU409
PIU4010
PIU4011
PIU4012
PIU4013
PIU4014
PIU4015
PIU4016
PIU4017
PIU4018
PIU4019
PIU4020
PIU4021
PIU4022
PIU4023
PIU4024
PIU4025
PIU4026
PIU4027 PIU4028 PIU4029
PIU4030
PIU4031
COU4
PIU1601
PIU1602
PIU1603
COU16
PIW103
COW1:3
PIW104
COW1:4
PIW105
COW1:5
PIW106
COW1:6
PIW201
COW2:1
PIW202
COW2:2
PIW203
COW2:3
PIW204
COW2:4
PIW205
COW2:5
PIW207
COW2:7
PIW209
COW2:9
PIW2010
COW2:10
PIW303
COW3:3
PIW304
COW3:4
PIW305
COW3:5
PIW306
COW3:6
PIW1001
COW10:1
PIW1002
COW10:2
PIW1003
COW10:3
PIW1004
COW10:4
PIW1005
COW10:5
PIW1006
COW10:6
PIW1007
COW10:7
PIW1008
COW10:8
PIW1009
COW10:9
PIW10010
COW10:10
PIW1101
COW11:1
PIW1102
COW11:2
POAN0
POAN1
POEXTERIA STATE SENCE
POFTM10CH0
POPTB18
POPTB19
PORESET
POSPI10PCS1
POSPI10SCK
POSPI10SOUT
POSWD0CLK
POSWD0DIO
POUART00RX
POUART00TX
POUART10TX
POUART20RX
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
17
K K
J J
I I
H H
G G
F F
E E
D D
C C
B B
A A
*
Section:
Product(s):
INPUT-OUTPUT.SchDoc
M1487 2 *Sheet OfPCB#: Rev#:
Modified:
V06
File:2019-11-08
LP-LED4X
EML Rev#: XX
Tmp Rev: V031
2
6
1
3
5
4
S TR
-
--
.
3918
1/4in JCK
J1
1
2
.
XLR FEMALE
3922
J2:1
4
.
XLR FEMALE
3922
J2:2
.
XLR FEMALE
3922
1
2
J6:1
.
XLR FEMALE
3922
4
J6:2
2
1
XLR MALE
.
3923
J3
2
1
XLR MALE
.
3923
J7
GND
+24V
1
4 W4:1
2
4 W4:2
3
4 W4:3
4
4 W4:4
1K0
W100
0805
R16
1K0
W100
0805
R17
W100
2K0
0805
R11
1N
0805
50V
C16
1N
0805
50V
C17
SO14
TLV2474
7946
-
2
+
3
1
U5:1
SO14
TLV2474
7946
V+
4
V-
11
U5:5
SOIC-D
SN74AHC138
7948
VCC
16
G2B
5
Y6
9
Y4
11
B
2
Y2
13
Y0
15
Y5
10
Y3
12
Y1
14
Y7
7
A
1
C
3
G2A
4
G1
6
GND
8
U6
POD# 1
POD#1
GND
2
4 W6:2
3
4 W6:3
4
4 W6:4
1
4 W5:1
1K0
W100
0805
R20
1K0
W100
0805
R18
W100
2K0
0805
R19
1N
0805
50V
C19
1N
0805
50V
C18
SO14
TLV2474
7946
-
6
+
5
7
U5:2
POD# 2
POD#2
GND
2
4 W7:2
3
4 W7:3
4
4 W7:4
1
4 W6:1
1K0
W100
0805
R83
1K0
W100
0805
R21
W100
2K0
0805
R82
1N
0805
50V
C20
1N
0805
50V
C21
POD# 3
POD#3
GND
2
4 W5:2
3
4 W5:3
4
4 W5:4
1
4 W7:1
1K0
W100
0805
R26
1K0
W100
0805
R24
W100
2K0
0805
R25
1N
0805
50V
C22
1N
0805
50V
C23
POD# 4
POD#4
GND
DGGND
+3V3
+3V3
GND
SO14
TLV2474
7946
-
9
+
10
8
U5:3
SO14
TLV2474
7946
-
13
+
12
14
U5:4
+3V3
DGGND
DGGND
2
2W9:2
1
2W9:1
+24V
GND
100N
0805
50V
C24
YS/4194
4 POS 3MM HEADER
YS/4164
SO14
TLV2474
7946
-
2
+
3
1
U7:1
SO14
TLV2474
7946
-
6
+
5
7
U7:2
SO14
TLV2474
7946
-
9
+
10
8
U7:3
SO14
TLV2474
7946
-
13
+
12
14
U7:4
SO14
TLV2474
7946
V+
4
V-
11
U7:5
1206
100V100N
C30
1206
100V100N
C37
ELE 6mm
25V33U
C40
0805
50V22P
C26
0805
50V22P
C35
W250
619K
1206
R33
W250
619K
1206
R35
W125
4K02
0805
R34
W125
4K02
0805
R36
W100
2K0
0805
R38
W100
2K0
0805
R40
W250
100R
1206
R41
W250
100R
1206
R42
W250
100R
1206
R43
PTC
20%
R39
6482
AGND
AUDIO IN
GND
1
CS
7
WB
4
DIN
8
WA
12
SCLK
9
HA
13
LA
14
HB
3
LB
2
VDD
11
TSSOP-14
7945
MAX5414EUD
U8:1
TSSOP-14
N.C.3
10
N.C.2
6
N.C.1
5
7945
MAX5414EUD
U8:2
+3V3
AGND
ELE 6mm
25V33U
C38
ELE 6mm
25V33U
C39
AGND
SPI1_SOUT
+3V3
AGND
SPI1_SCK
SPI1_PCS1
SPI1_PCS1
0805
50V 22P
C34
W100
2K0
0805
R31
W100
2K0
0805
R32
1N5
0805
50V
C31
1N5
0805
50V
C25
1K0
W100
0805
R30
1N5
0805
50V
C36
AGND
W250
100R
1206
R29
AN0
AGND
+3V3
DO214AC
B160
D5
DO-214AC
10V0
D6
1N
0805
50V
C41
2W00
680R
2512
R80
2W00
680R
2512
R69
W125
10K
0805
R44
W125
4K7
0805
R70
W125
47K5
0805
R49
1K0
W100
0805
R93
W125
10K
0805
R50
+24V
+3V3
DGGND
AGND
1
3
2
+
-
SO8
LM393D
7661
U9:1
7
5
6
+
-
SO8
LM393D
7661
U9:2
V+
8
V-
4
SO8
LM393D
7661
U9:3
UART0_RX
DGGND
Ferrite
L4
Ferrite
L5
1W00
39R
2512
R56
Ferrite
L3
W250
100R
1206
R51
23
1OE
1
SOIC14
SN74LVTH125
7959
U10:1
56
2OE
4
SOIC14
SN74LVTH125
7959
U10:2
98
3OE
10
SOIC14
SN74LVTH125
7959
U10:3
1211
4OE
13
SOIC14
SN74LVTH125
7959
U10:4
SO14
SN74LVTH125
7959
GND
7
VCC
14
U10:5
DGGND
DGGND
UART0_TX
+24V
DGGND
+3V3
DGGND
DGGND
FROM CONTROLLER
SOD-123
MMSZ15T1G
15V0
D4
15V0
SOD-123
MMSZ15T1G
D9
W250
100R
1206
R52
UART2_RX
SOD-123
MMSZ15T1G
15V0
D11
15V0
SOD-123
MMSZ15T1G
D10
DGGND
DGGND
DGGND
+3V3
1W00
1K
2512
R53
1W00
1K
2512
R54
DMX
FROM
LINK
LINK
100N
0805
50V
C49
100N
0805
50V
C68
100N
0805
50V
C67
SOT323
SI1308EDL
8276
2
1
3
S
D
G
Q2
SOT23-5
RO
VCC
GND
B
MAX3280E
6658
A
U11
AN1
UART1_TX
PIN 1 OF MICRO
UART0_TX
UART0_RX
AN1
AN0
UART2_RX
PTB19
PTB19
PTB18
PTB18
FROM MICRO U1
82K5
W125
0805
R47
0805
50V
100P
C56
0805
50V
100P
C57
82K5
W125
0805
R48
112kHz
EXTERIA STATE SENCE
100N
0805
50V
C50
AGND
DGGND GNDAGND
GROUND TIES
100N
0805
50V
C61
100N
0805
50V
C59
+3V3
DGGND
1N
0805
50V
C60
DGGND
1W00
39R
2512
R57
0R8
0A2
R66
TP3
TP4
AGND
DO-214ACBI
SMAJ150CA
D2
DO-214ACBI
SMAJ150CA
D7
1K0
W100
0805
R71
1K0
W100
0805
R73
W250
4K7
1206
R72
AGND
SPRKGAP
SG2
SPRKGAP
SG1
SPRKGAP
SG4
SPRKGAP
SG3
SPRKGAP
SG5
SPRKGAP
SG7
SPRKGAP
SG6
DGGND
100N
0805
50V
C53
DO-214ACBI
SMAJ150CA
D8
W125
10K00
0805
R81
SO8
TLV2316
6679
3
2
1
+
-
U14:1
SO8
TLV2316
6679
5
6
7
+
-
U13:2
SO8
TLV2316
6679
V-
4
V+
8
U14:3
W125
10K00
0805
R76
W125
20K
0805
R77
W125
20K
0805
R75
AGND
10U
Elec
16V
C63
+3V3+3V3
AGND
AGND
W100
1M0
0805
R78
10U
Elec
16V
C64
M3125
2386
2
1
4
3
MIC1
0805
16V10U
C65
100N
0805
50V
C73
MICGND
+3V3_INBLU MIC+3V3
SO8
TLV2316
6679
V-
4
V+
8
U13:3
SOT23-6
B2
1
B1
3
GND
2
A
4
VCC
5
S
6
SPDT
6677
U15
AGND
AGND
+3V3
SO8
TLV2316
6679
3
2
1
+
-
U13:1
MIC2+3V3
MICGND
1K0
W100
0805
R74
6
2
W3:2
6
1
W3:1
2
6W1:2
1
6 W1:1
W100
100R
0805
R79
W100
100R
0805
R45
0805
16V10U
C66
W100
2K0
0805
R7
W100
2K0
0805
R8
1K0
W100
0805
R22
1K0
W100
0805
R23
MICGND
MIC2+3V3
100N
0805
50V
C52
MICGND
100N
0805
50V
C69
100N
0805
50V
C70
AGND
+3V3
+3V3
W125
470R
0805
R86
W125
470R
0805
R87
W125
470R
0805
R88
W125
470R
0805
R89
+3V3
+3V3
+3V3
+3V3
3A5
5062
R27
3A5
5062
R90
3A5
5062
R28
3A5
5062
R91
MICGNDDGNDBLU
ON LITTLE BREAKAWAY
MICGND
W100
100R
0805
R46
100N
0805
50V
C51
10N
0805
50V
C72
SOD-323
200V
D12
AGND
N12
N13
N15
N14
N19
N20
N16
N21
N22
N23
N24
N25
N26
N17
N18
N27
N28
MJB42C
D2PAK
7843
Q3
SOT23
MMBT3906LT1
7805
Q4
W125
10K
0805
R58
W125
10K
0805
R64
W125
10K
0805
R59
47K
W063
R5
47K
W125
1K5
0805
R6
W500
3R3
1210
R4
1W00
1K8
2512
R10
SOT-23
MMBT3904
7838
Q5
SOT-23
6V2
D3
DO214AC
B160
D13
6x6mm
35V47U
C12
W125
470R
0805
R65
W125
470R
0805
R67
PIC1201
PIC1202
COC12
PIC1601
PIC1602
COC16
PIC1701
PIC1702
COC17
PIC1801
PIC1802
COC18
PIC1901
PIC1902
COC19
PIC2001
PIC2002
COC20
PIC2101
PIC2102
COC21
PIC2201
PIC2202
COC22
PIC2301
PIC2302
COC23
PIC2401
PIC2402
COC24
PIC2501
PIC2502
COC25
PIC2601
PIC2602
COC26
PIC3001
PIC3002
COC30
PIC3101
PIC3102
COC31
PIC3401
PIC3402
COC34
PIC3501
PIC3502
COC35
PIC3601
PIC3602
COC36
PIC3701
PIC3702
COC37
PIC3801
PIC3802
COC38
PIC3901
PIC3902
COC39
PIC4001
PIC4002
COC40
PIC4101
PIC4102
COC41
PIC4901
PIC4902
COC49
PIC5001
PIC5002
COC50
PIC5101
PIC5102
COC51
PIC5201
PIC5202
COC52
PIC5301
PIC5302
COC53
PIC5601
PIC5602
COC56
PIC5701
PIC5702
COC57
PIC5901
PIC5902
COC59
PIC6001
PIC6002
COC60
PIC6101
PIC6102
COC61
PIC6301
PIC6302
COC63
PIC6401
PIC6402
COC64
PIC6501
PIC6502
COC65
PIC6601
PIC6602
COC66
PIC6701
PIC6702
COC67
PIC6801
PIC6802
COC68
PIC6901
PIC6902
COC69
PIC7001
PIC7002
COC70
PIC7201
PIC7202
COC72
PIC7301
PIC7302
COC73
PID201
PID202
COD2
PID301
PID302
COD3
PID401
PID402
COD4
PID501 PID502
COD5
PID601
PID602
COD6
PID701
PID702
COD7
PID801
PID802
COD8
PID901
PID902
COD9
PID1001
PID1002
COD10
PID1101
PID1102
COD11
PID1201
PID1202
COD12
PID1301 PID1302
COD13
PIJ101
PIJ102
PIJ103
PIJ104
PIJ105
PIJ106
COJ1
PIJ201
PIJ202
PIJ203
COJ2:1
PIJ204
COJ2:2
PIJ301
PIJ302
PIJ303
PIJ304
COJ3
PIJ601
PIJ602
PIJ603
COJ6:1
PIJ604
COJ6:2
PIJ701
PIJ702
PIJ703
PIJ704
COJ7
PIL301
PIL302
COL3
PIL401
PIL402
COL4
PIL501
PIL502
COL5
PIMIC101
PIMIC102
PIMIC103
PIMIC104
COMIC1
PIN1201
CON12
PIN1301
CON13
PIN1401
CON14
PIN1501
CON15
PIN1601
CON16
PIN1701
CON17
PIN1801
CON18
PIN1901
CON19
PIN2001
CON20
PIN2101
CON21
PIN2201
CON22
PIN2301
CON23
PIN2401
CON24
PIN2501
CON25
PIN2601
CON26
PIN2701
CON27
PIN2801
CON28
PIQ201
PIQ202
PIQ203
COQ2
PIQ301
PIQ302
PIQ303
COQ3
PIQ401
PIQ402
PIQ403
COQ4
PIQ501
PIQ502
PIQ503
COQ5
PIR401
PIR402
COR4
PIR501
PIR502
COR5
PIR601
PIR602
COR6
PIR701
PIR702
COR7
PIR801
PIR802
COR8
PIR1001
PIR1002
COR10
PIR1101
PIR1102
COR11
PIR1601
PIR1602
COR16
PIR1701
PIR1702
COR17
PIR1801
PIR1802
COR18
PIR1901
PIR1902
COR19
PIR2001
PIR2002
COR20
PIR2101
PIR2102
COR21
PIR2201
PIR2202
COR22
PIR2301
PIR2302
COR23
PIR2401
PIR2402
COR24
PIR2501
PIR2502
COR25
PIR2601
PIR2602
COR26
PIR2701
PIR2702
COR27
PIR2801
PIR2802
COR28
PIR2901
PIR2902
COR29
PIR3001
PIR3002
COR30
PIR3101
PIR3102
COR31
PIR3201
PIR3202
COR32
PIR3301
PIR3302
COR33
PIR3401
PIR3402
COR34
PIR3501
PIR3502
COR35
PIR3601
PIR3602
COR36
PIR3801
PIR3802
COR38
PIR3901
PIR3902
COR39
PIR4001
PIR4002
COR40
PIR4101
PIR4102
COR41
PIR4201
PIR4202
COR42
PIR4301
PIR4302
COR43
PIR4401
PIR4402
COR44
PIR4501
PIR4502
COR45
PIR4601
PIR4602
COR46
PIR4701
PIR4702
COR47
PIR4801
PIR4802
COR48
PIR4901
PIR4902
COR49
PIR5001
PIR5002
COR50
PIR5101
PIR5102
COR51
PIR5201
PIR5202
COR52
PIR5301
PIR5302
COR53
PIR5401
PIR5402
COR54
PIR5601
PIR5602
COR56
PIR5701
PIR5702
COR57
PIR5801
PIR5802
COR58
PIR5901
PIR5902
COR59
PIR6201
PIR6202
COR62
PIR6301 PIR6302
COR63
PIR6401
PIR6402
COR64
PIR6501
PIR6502
COR65
PIR6601
PIR6602
COR66
PIR6701
PIR6702
COR67
PIR6901
PIR6902
COR69
PIR7001
PIR7002
COR70
PIR7101
PIR7102
COR71
PIR7201
PIR7202
COR72
PIR7301
PIR7302
COR73
PIR7401
PIR7402
COR74
PIR7501
PIR7502
COR75
PIR7601
PIR7602
COR76
PIR7701
PIR7702
COR77
PIR7801
PIR7802
COR78
PIR7901
PIR7902
COR79
PIR8001
PIR8002
COR80
PIR8101
PIR8102
COR81
PIR8201
PIR8202
COR82
PIR8301
PIR8302
COR83
PIR8601
PIR8602
COR86
PIR8701
PIR8702
COR87
PIR8801
PIR8802
COR88
PIR8901
PIR8902
COR89
PIR9001
PIR9002
COR90
PIR9101
PIR9102
COR91
PIR9201
PIR9202
COR92
PIR9301
PIR9302
COR93
PISG101
PISG102
COSG1
PISG201
PISG202
COSG2
PISG301
PISG302
COSG3
PISG401
PISG402
COSG4
PISG501
PISG502
COSG5
PISG601
PISG602
COSG6
PISG701
PISG702
COSG7
PITP301
COTP3
PITP401
COTP4
PIU501
PIU502
PIU503
COU5:1
PIU505
PIU506
PIU507
COU5:2
PIU508
PIU509
PIU5010
COU5:3
PIU5012
PIU5013
PIU5014
COU5:4
PIU504
PIU5011
COU5:5
PIU601
PIU602
PIU603
PIU604
PIU605
PIU606
PIU607
PIU608
PIU609
PIU6010
PIU6011
PIU6012
PIU6013
PIU6014
PIU6015
PIU6016
COU6
PIU701
PIU702
PIU703
COU7:1
PIU705
PIU706
PIU707
COU7:2
PIU708
PIU709
PIU7010
COU7:3
PIU7012
PIU7013
PIU7014
COU7:4
PIU704
PIU7011
COU7:5
PIU801
PIU802
PIU803
PIU804
PIU807
PIU808
PIU809
PIU8011
PIU8012
PIU8013
PIU8014
COU8:1
PIU805
PIU806
PIU8010
COU8:2
PIU901
PIU902
PIU903
COU9:1
PIU905
PIU906
PIU907
COU9:2
PIU904
PIU908
COU9:3
PIU1001
PIU1002
PIU1003
COU10:1
PIU1004
PIU1005
PIU1006
COU10:2
PIU1008
PIU1009
PIU10010
COU10:3
PIU10011
PIU10012
PIU10013
COU10:4
PIU1007
PIU10014
COU10:5
PIU1101
PIU1102
PIU1103
PIU1104
PIU1105
COU11
PIU1301
PIU1302
PIU1303
COU13:1
PIU1305
PIU1306
PIU1307
COU13:2
PIU1304
PIU1308
COU13:3
PIU1401
PIU1402
PIU1403
COU14:1
PIU1404
PIU1408
COU14:3
PIU1501
PIU1502 PIU1503
PIU1504 PIU1505
PIU1506
COU15
PIW101
COW1:1
PIW102
COW1:2
PIW301
COW3:1
PIW302
COW3:2
PIW401
COW4:1
PIW402
COW4:2
PIW403
COW4:3
PIW404
COW4:4
PIW501
COW5:1
PIW502
COW5:2
PIW503
COW5:3
PIW504
COW5:4
PIW601
COW6:1
PIW602
COW6:2
PIW603
COW6:3
PIW604
COW6:4
PIW701
COW7:1
PIW702
COW7:2
PIW703
COW7:3
PIW704
COW7:4
PIW901
COW9:1
PIW902
COW9:2
POAN0
POAN1
POEXTERIA STATE SENCE
POPOD# 1
POPOD# 2
POPOD# 3
POPOD# 4
POPTB18
POPTB19
POSPI10PCS1
POSPI10SCK
POSPI10SOUT
POUART00RX
POUART00TX
POUART10TX
POUART20RX
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58

YORKVILLE LP-LED4X Manuel utilisateur

Catégorie
Équipement musical supplémentaire
Taper
Manuel utilisateur
Ce manuel convient également à