Haier HLP21E - Pulsator Wash With Tub Manuel utilisateur

Marque: Haier

Modèle: HLP21E - Pulsator Wash With Tub

Catégorie: Machines à laver

Taper: Manuel utilisateur

What The World Comes Home To

HLP21E-01

Issued: May-03

IMPORTANT

Do Not Return This Product To The Store

If you have a problem with this product, please contact the "Haier Customer

Satisfaction Center" at 1-877-337-3639.

DATED PROOF OF PURCHASE, MODEL # AND SERIAL # REQUIRED FOR WARRANTY SER-

VICE

IMPORTANT

Ne pas renvoyer cet appareil au magasin.

Si vous avez un problème avec cet appareil, veuillez contacter le service à la clientèle

de Haier au 1-877-337-3639.

IL EST OBLIGATOIRE DE FOURNIR UNE PREUVE D'ACHAT DATÉE, LE NUMÉRO DU MODÈLE

ET SON NUMÉRO DE SÉRIE AFIN DE BÉNÉFICIER DE LA COUVERTURE DE LA GARANTIE.

IMPORTANTE

No Devuelva Este Producto al Establecimiento Compra.

Si tiene problemas con este producto, por favor póngase en contacto con el "Centro

Haier de Atención al Cliente" en el 1-877-337-3639.

PARA EL SERVICIO DE GARANTÍA SE REQUIERE PRUEBA DE COMPRA, FECHADA, No. DE

MODELO Y No. DE SERIE

115 V, 60 Hz

Made in China

Fabriqué en Chine

Hecho en China

Haier America

New York, NY 10018

Printed in China

Part # WD-9999-14

HLP21E MANUAL 6/20/03 10:03 AM Page 1

What The World Comes Home To

Portable

Electronic Washer

User Manual-

Model #

HLP21E

Lave-Linge

Électronique Mobile

Lavarropas

Eléctrico portátil

Guide de l'Utilisateur-

Modèle #

Manual del Usuario-

Modelo #

HLP21E MANUAL 6/20/03 10:03 AM Page 2

IMPORTANT SAFETY INSTRUCTIONS

Warning – To reduce the risk of fire, electric shock, or injury

to persons when using your appliance, follow basic

precautions, including the following:

1. Read all instructions before using the appliance.

2. Use this appliance only for its intended purpose as described in this use and

care guide.

3. Use only detergents or softeners as recommended for use in this manual and

keep them out of the reach of children.

4. This appliance must be properly installed in accordance with the installation

instructions before it is used.

5. Never unplug your appliance by pulling on the power cord. Always grasp the

plug firmly and pull straight out from the outlet.

6. Replace immediately any worn power cords, loose plugs and power outlets.

7. Unplug your appliance before cleaning or before making any repairs.

8. If your old appliance is not being used, we recommend that you remove the

door. This will reduce the possibility of danger to children.

9. Do not operate your appliance in the presence of explosive fumes.

10. Do not use this appliance to wash clothes that have been soaked, spotted or

washed in gasoline, dry cleaning solvents or any other explosive or flammable

substances that may ignite and explode.

11. Clothes or rags used to clean flammable or explosive materials should not be

washed in this appliance until all traces of this material have been removed.

12. Do not add or mix any flammable or explosive substances to the wash.

13. Do not try to remove clothes while the tub is moving. Allow it to come to a

complete stop before reaching in.

14. The appliance’s loading door must be closed when the tub is spinning.

15. Do not operate your appliance when parts are missing or broken.

16. Do not use this appliance for commercial uses.

17. Do not operate this appliance unless all enclosure panels are properly in place.

18. Do not tamper with controls.

19. To reduce the risk of injury, do not allow children to play in or on the appliance.

Close supervision of children is necessary when the appliance is used near

children.

20. This appliance must be connected to a proper electrical outlet with the correct

electrical supply.

English

HLP21E MANUAL 6/20/03 10:03 AM Page 3

21. Proper grounding must be ensured to reduce the risk of shock and fire. DO

NOT CUT OR REMOVE THE GROUNDING PLUG. If you do not have a

three-prong electric receptacle outlet in the wall, have a certified electrician

install the proper receptacle. The wall receptacle MUST be properly grounded.

22. Hydrogen gas may be produced if the water heater has not been used in more

than 2 weeks. This may be explosive under certain circumstances. If this is the

case turn on all the hot faucets and let the hot water run for a few minutes

before using this appliance. This will let the trapped hydrogen escape. Avoid

accidents during this process by refraining from turning ON any electrical

appliances, smoking, lighting a match/lighter, and using flames.

23. Do not repair or replace any part of the appliance or attempt any servicing

unless specifically recommended in the user-repair instructions, which you

understand and have the skill to carry out.

Note: If for any reason this product requires service, we strongly

recommend that a certified technician perform the service.

24. To reduce the risk of electric shock or fire, do not use extension cords or

adapters to connect the unit to an electrical power source.

SAVE THESE INSTRUCTIONS

For Future Use

English

DANGER

Risk of child entrapment. Before throwing away your old

appliance, remove the door so that children may

not easily become trapped inside.

Thank you for purchasing our Haier

product. This easy-to-use manual will

guide you in getting the best use of

your washer.

Remember to record the model and

serial number. They are on a label in

back of the washer.

Model number

Serial number

Date of purchase

(Staple your receipt to your manual.) You will need it to

obtain warranty service.

HLP21E MANUAL 6/20/03 10:03 AM Page 4

Table Of Contents

PAGE

SAFETY INSTRUCTIONS ................................................................1-2

PARTS AND FEATURES..................................................................4-5

OPERATING YOUR WASHER ....................................................6-11

UNPACKING AND ACCESSORIES INVENTORY ..........................12

PROPER LOCATION ........................................................................13

INSTALLATION INSTRUCTIONS ..............................................14-16

UNIT DIMENSIONS ........................................................................17

ELECTRICAL CONNECTIONS ..........................................................18

PROPER CARE AND CLEANING ....................................................19

TROUBLESHOOTING GUIDE....................................................20-21

WARRANTY......................................................................................22

English

HLP21E MANUAL 6/20/03 10:03 AM Page 5

English

1. Top Lid

2. Control Panel

3. Washer Cabinet

4. Front Leveling Leg

5. Cabinet Handle (located on both

sides of the washer)

OPERATING INSTRUCTIONS

Parts and Features

HLP21E MANUAL 6/20/03 10:03 AM Page 6

English

1. Water Inlet Valve

2. Water Absorption Cushion

3. Water Level Selector

4. Power Cord Holder Clip

5. Power Cord (115 Volt / 60 Hz)

6. Drain Hose

HLP21E MANUAL 6/20/03 10:03 AM Page 7

English

OPERATING YOUR WASHER

The Control Panel

Power ON/OFF: (1)

• Press the button once to turn ON the power to the washer. Press it again to turn

the power OFF.

Start/Pause: (2)

• Press this button once to start the wash process. Press this button once again to

pause the activity during the wash cycle. Push it again to resume the wash cycle.

Program Select: (3)

• Select your desired cycle program by pressing the "Program Select" button. There

are 7 options to select from. Press the Select button for the desired setting.

Water Level Selector: (4)

• Turn the Water Level Selector knob to select the proper water level setting. You

may select from low, medium and high water level settings depending on the

wash load.

Function Indicator Lights:

• The function display lights indicate that a selected feature is ON or that the cycle

is about to begin.

• During the wash cycle, a flashing light indicates the current wash/rinse cycle

program.

• Rapid flashing indicates that the washer is not operating properly.

Loading the Washer

• Load each item loosely.

• Separate the white from the colored clothing. Separate heavy fabrics from light

fabrics.

• Carefully check all pockets and cuffs for small items. They can easily slide into the

tub and cause damage to the tub.

QUICK

POWER

WASH

RINSE

SPIN

PROGRAM

SELECT

START

PAUSE

POWER

ON/OFF

123

Water level

select

Low

Middle

High

Add

HLP21E MANUAL 6/20/03 10:03 AM Page 8

English

• Pre-treat all stains and heavily soiled areas for best results.

• Do not overload your washer.

• Close the door properly after loading the clothes.

• When loading wet items, keep water level high enough to keep the unit in

balance and to allow clothing to float easily in the water.

Proper Use of Detergent

• Fill water in the tub at the "Low" water level.

• Add the detergent.

• Load the washer.

• Select the water level.

Note: The amount of detergent used depends on the size of the load, the water

type (hard or soft) and whether the clothes are heavily soiled or lightly

soiled. Besides the performance of the washing machine, the quality of the

detergent also affects the wash result. For best results, use low sudsing deter-

gents only. Refer to the detergent manufacturer’s recommended amount for

usage.

Proper Use of Bleach

Refer to the bleach manufacturer’s chart for the recommended use of liquid bleach.

Dilute the bleach and add it to the water before putting clothes into the washtub.

Warning! Be careful not to spill undiluted bleach onto the washer cabinet or onto

clothing. It is a strong chemical that may damage your clothes and the

finish of the washer if not properly diluted.

Lint Filter and Water Filter

• The Lint filter is located inside the washer drum. A small nylon bag collects lint

and residue from clothes during the wash cycle.

Note: Do not wash your clothes without the filter in its compartment

inside the tub.

• You must clean the filter after every load for the best results. Push down the tab in

the filter to remove. Clean and slide the filter back in place.

• There is also a filter in the water inlet valve. This prevents foreign particles in the

water from entering the washer. Clean this at least once a month.

HLP21E MANUAL 6/20/03 10:03 AM Page 9

English

Selecting the Wash Cycle

• Press the "Program Select" button for your desired wash cycle. Choose between 7

options.

• The total time includes the normal water inlet time and drain time. The total

washing time may be affected by the water inlet pressure and water level.

• The spin time is the time from the intermittent running to the finishing of the cycle.

• In the "Power Wash" program, the first soak is approximately 20 minutes,

pre-wash is approximately 8 minutes. Clothes are soaked again for

approximately 5 minutes. The washing, rinsing and spinning will then be

completed. The wash time includes the pre-wash time.

• In the "Quick" program select wash, rinse and spin are set automatically. No

procedure can be selected after setting.

Note: When you turn the power ON, the machine will set the standard wash

program to the wash/rinse/spin position.

Program Select Wash Program Application

Power On Wash, Rinse & Spin Normal Wash

Press Once Wash No Spin or Rinse

Press Twice Wash & Rinse No Spin

Press Three Times Rinse & Spin No Wash

Press Four Times Spin No Wash or Rinse

Press Five Times Power Wash, Wash, Rinse, For heavily soiled and

Spin very dirty clothes

Press Six Times Quick, Wash, Rinse, Spin For a quick speed wash

HLP21E MANUAL 6/20/03 10:03 AM Page 10

English

Wash Program Soak Wash Rinse Spin Total Times

(approx (approx Minutes (approx (approx

minutes) minutes) / Times minutes) minutes)

Wash, Rinse - 8 – 15 6 / 2 4 35 – 42

& Spin

Twice Wash, 25 16 – 30 6 / 2 4 68 – 82

Wash, Rinse

& Spin

Quick, Wash, - 5 - 9 3 / 1 4 21 – 28

Rinse & Spin

Selecting the Water Level

• There are 3 water levels to chose from: Low, Medium and High. Your selection may

depend on your wash load.

• Turning the knob to "Reset" will add more water to your wash load. Release and set

to desired level after adding water.

Recommended Water Levels

Load Size in lbs Water Level Approximate Water used in Gallons

3.3 – 6.6 High 8.72

1.76 – 3.3 Medium 5.81

Less than 1.76 Low 3.70

Note: Incoming hot water must not exceed 122˚F/50˚C.

HLP21E MANUAL 6/20/03 10:03 AM Page 11

English

End-of-Cycle Signal

The machine will beep at the end of the cycle, indicating that the washing is

complete. The "Wash/Rinse/Spin" indicator lights will still be ON. The washer will

turn OFF automatically in approximately 10 minutes after the completion of the

cycle.

Closing the Top Lid

For safety purposes, the top lid must always be closed during the wash process. If

you open the top lid while the wash cycle is in progress, you will observe the

following:

• An alarm will sound.

• The tub will not spin while the lid is open.

• If the unit is in wash mode, it will stop running.

Simply close the top lid and press the start/pause button to resume the cycle.

Steps for the Wash Process

1. Turn the power ON by pressing the "ON" button.

2. Press "Program Select" to select the wash program. Refer to page 8 for the

selection chart.

3. Select the water level.

4. Add the detergent.

5. Add the wash load.

6. After the washing machine starts, you may change the program by turning OFF

the machine and then restarting to make the new selection.

Note: If the washer is turned ON without any water in the tub, it will start to spin

after a few minutes. The pulsator will not rotate unless the water is filled to a

selected level.

Note: Do not use the "Power Wash" program for woolen clothing.

HLP21E MANUAL 6/20/03 10:03 AM Page 12

English

Normal Operating Sounds

The following sounds are normally heard during the operation of the washer:

• Tumbling sounds can be heard as heavy wet clothes in the washer are tossed

around continuously.

• Air rushing noise is the result of the washtub spinning at a very high RPM.

• Clicking sounds are caused by the wash and rinse cycles turning ON and OFF.

HLP21E MANUAL 6/20/03 10:03 AM Page 13

English

Unpacking and Accessories Inventory

Unpacking

1. Remove all packing materials. This includes the foam base and all adhesive tape

holding the washer accessories inside and outside. Slide out and remove the

bottom Styrofoam that is used to protect the washer from shipping damage due

to vibrations and shock.

2. Inspect and remove any remaining packing, tape or printed materials before

using the washer.

Note: The bottom panel is located between the upper foam protec-

tion and box.

Accessories

a) 1 Bottom Panel

b) 8 Screws for the Bottom Plate

c) 1 Water Inlet Hose

d) 1 Drain Hook (Gooseneck)

e) 1 Quick Sink Faucet Adapter

f) 2 Washers

g) 1 Lint Filter

Check to make sure that the accessories are present and in good condition.

If you find that they are not in good condition or are missing, please contact

our customer service department for assistance. Our Toll-Free number is

1-877-337-3639.

HLP21E MANUAL 6/20/03 10:03 AM Page 14

English

Proper Location

General

• Select a suitable location for the washer on a hard even surface away from direct

sunlight and heat sources (e.g., radiators, baseboard heaters, cooking appliances,

etc.).

• Any floor unevenness should be corrected with the leveling leg located on the

bottom right corner of the washer.

• The washer must be placed at room temperature. You must not place the washer

where the temperature is at or below freezing.

Storage in Cold Environments

• This appliance must be stored at room temperature.

• If you received this appliance when the outside temperature is below freezing, do

not operate until this appliance has warmed to room temperature.

• Do not install or operate this appliance in an area where room temperature is

below freezing.

HLP21E MANUAL 6/20/03 10:03 AM Page 15

English

Installation Instructions

Read carefully and understand all installation instructions before installing this

washing machine. If after completing the process you are still unsure whether the

washer has been properly installed, we recommend that you contact a qualified

installer.

Tools and Materials Required

You will need to use the following tools when installing your washer:

Scissors

Phillips Screwdriver

Flathead Screwdriver

Pliers

Wrench

Tape Measure

Gloves

Level

Installing the Bottom Panel

The bottom panel blocks noises to provide you with the quietest performance

possible during the wash cycle operation.

1. First, lay down the washer on its front side.

2. Place the panel against the bottom of the machine. Align the holes in the panel

with the holes in the washer.

3. Insert the screws through the holes of the panel into the bottom of the washer and

tighten. (8 screws are supplied)

4. Once all screws have been installed and the panel is in place, return the washer

to its standing position.

Note: During this time, you may reroute the drain hose to the left or right

side for draining.

HLP21E MANUAL 6/20/03 10:03 AM Page 16

English

Installing the Lint Filter

The lint filter must be installed before the washer is used.

The lint filter is packaged with the User Manual.

Leveling the Washer

Your washer has an adjustable leveling leg that is located on the front right corner.

After properly placing your washer in its final location, you may level the washer.

• Loosen the adjustable nut. The leveling leg can be

adjusted by turning it counter-clockwise to raise the

washer and clockwise to lower the washer.

Note: If the washer is inclined more than 2˚, the machine

will not operate.

Installing Your Washer

Read the installation instructions carefully before beginning.

1. Connect the water inlet hose to the water faucet.

Note: The ends of the inlet hose are marked red and yellow. Red goes to washing

machine and yellow goes to the faucet.

2. Connect the other ends to the washer inlet located at the top rear of the machine.

Insert a new flat washer (provided) to each end of the inlet hose.

3. The drain hose must be placed into a drainpipe or sink at least 1-1/2 inches in

diameter. Use the gooseneck drain hook to hold the hose in place. To avoid

possible water back-up, the drain hose must reach a height of at least 31-1/2

inches minimum and 40 inches maximum.

4. Plug in the washer to a regular 115 Volt / 60 Hz, 15 Amps outlet.

Note: Carefully inspect for any leaks around the machine and at the back. If there

is a leak, check if any connections are loose. You may need to tighten any

loose connections. Do not remove the water absorption cushion. Check

before each use to make sure it is not damaged.

CAUTION! If after completing these steps you are still unsure whether unit has

been properly installed, contact a qualified installer. We recommend

that the washer be installed by a certified technician to ensure that it is

properly installed.

HLP21E MANUAL 6/20/03 10:03 AM Page 17

English

Installing Quick Sink Adapter:

When installing the quick sink faucet adapter to the faucet, follow the steps below:

1. First, remove the aerator from your faucet nozzle and determine the size/type of

the faucet.

2. Once you determine the size/type of the faucet (Outside Threaded End or Inside

Threaded End), place the proper sized rubber washer into the silver faucet

adapter.

3. Attach the silver faucet connector to the faucet.

4. Attach the faucet connector to the water inlet hose and make sure that the

rubber washer is placed in between.

5. Attach the other end of the water inlet hose to the washer water inlet and make

sure that the rubber washer is placed in between.

Faucet

Washers

Faucet Adapter

Quick Connector

Water inlet hose

Drain hose

Washer

Rear View of Washer

HLP21E MANUAL 6/20/03 10:03 AM Page 18

English

Unit Dimensions

29-15/16”

17-1/4”

17-5/8”

38-5/8”

17-1/4”

17-5/8”

HLP21E MANUAL 6/20/03 10:03 AM Page 19

English

Grounding Instructions

This appliance must be grounded. In the event of an electrical short circuit,

grounding reduces the risk of electric shock by providing an escape wire for

the electrical current. This appliance is equipped with a cord having a grounding

wire with a grounded plug. The plug must be inserted into an outlet that is

properly installed and grounded.

• Improper use of the plug can result in a risk of electric shock.

• Consult a qualified electrician or service person if the grounding

instructions are not completely understood or if in doubt as to

whether the appliance is properly grounded.

Wiring Requirements

• This appliance must be plugged into at least a 15 AMP 110-115 VOLT,

60 HZ GROUNDED OUTLET.

Note: Where a standard two-prong outlet is

encountered, it is the personal

responsibility and obligation of the

consumer to have it replaced with a

properly grounded three-prong outlet.

Extension Cords:

We do not recommend that you use an extension cord.

Power Interruptions

Occasionally, there may be power interruptions due to thunderstorms or other

causes. Remove the power cord from the AC outlet when a power outage occurs.

When power has been restored, re-plug the power cord to AC outlet. If the outage

lasts for a prolonged period of time, clean the washer before using it again.

Electrical Connections

HLP21E MANUAL 6/20/03 10:03 AM Page 20

La page charge ...

Haier HLP21E - Pulsator Wash With Tub Manuel utilisateur

Marque: Haier

Modèle: HLP21E - Pulsator Wash With Tub

Catégorie: Machines à laver

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: Haier HLP21E - Pulsator Wash With Tub User manual
español: Haier HLP21E - Pulsator Wash With Tub Manual de usuario

Haier HLP21E - Pulsator Wash With Tub Manuel utilisateur

Haier HLP21E - Pulsator Wash With Tub Manuel utilisateur

dans d''autres langues

Documents connexes