Saeco Odea Go Operating And Maintenance Manual

Operation and maintenance manual

Before using the machine, please read the attached operating instructions.

Carefully read the safety rules

Mode d'emploi

Veuillez lire attentivement le mode d'emploi

(notamment les consignes de sécurité) avant d'utiliser l'appareil.

FOR HOUSEHOLD USE ONLY

sp

r

esso

tec

Sales & Service

courtesy of

2

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be

followed to reduce the risk of fire, electric shock, and/or injury to persons,

including the following:

1 Read all instructions and information in this instruction book and any

other literature included in this carton referring to this product before

operating or using this appliance.

2 Do not touch hot surfaces. Use handles or knobs.

3 To protect against fire, electric shock and personal injury do not immerse

cord, plugs or appliance in water or other liquid.

4 Close supervision is necessary when any appliance is used by or near

children.

5 Unplug from outlet when not in use and before cleaning. Allow to

cool before putting on or taking off parts, and before cleaning the

appliance.

6 Do not operate any appliance with a damaged cord or plug or after

the appliance malfunctions or has been damaged in any way. Return

appliance to the nearest authorized service centre for examination,

repair or adjustment.

7 The use of accessory attachments not recommended by the appliance

manufacturer may result in fire, electric shock or personal injury.

8 Do not use outdoors.

9 Do not let cord hang over edge of table or counter, or touch hot

surfaces.

10 Do not place on or near a hot gas or electric burner, or in a heated

oven.

11 Always turn appliance “OFF”, then plug cord into the wall outlet. To

disconnect, turn switch to “OFF”, then remove plug from wall outlet.

12 Do not use appliance for other than intended household use.

13 Use extreme caution when using hot steam.

SAVE THESE INSTRUCTIONS

3

CAUTION

This appliance is for household use only. Any servicing, other than cleaning

and user maintenance, should be performed by an authorized service

centre. Do not immerse machine in water. To reduce the risk of fire or

electric shock, do not disassemble the machine. There are no parts inside

the machine serviceable by the user. Repair should be done by authorized

service personnel only.

1 Check voltage to be sure that the voltage indicated on the nameplate

corresponds with your voltage.

2 Never use warm or hot water to fill the water tank. Use cold water only.

3 Keep your hands and the cord away from hot parts of the appliance

during operation.

4 Never clean with scrubbing powders or harsh cleaners. Simply use a soft

cloth dampened with water.

5 For optimal taste of your coffee, use purified or bottled water. Periodic

descaling is still recommended every 2-3 months.

INSTRUCTIONS FOR THE POWER

SUPPLY CORD

A A short power-supply cord is provided to reduce risks of tangling or

tripping over a longer cord.

B Longer extension cords are available and may be used if care is exercised in

their use.

C If a long extension cord is used:

1 the marked electrical rating of the extension cord should be at least as great

as the electrical rating of the appliance.

2 if the appliance is of the grounded type, the extension cord should be a

grounding type

3 the cord should not hang from the table to avoid the risk of tangling or

tripping.

4

CONTENTS

GENERAL INFORMATION ................................................................................................5

APPLIANCE .......................................................................................................................6

ACCESSORIES ..............................................................................................................................................6

INSTALLATION ..................................................................................................................7

STARTING THE MACHINE .............................................................................................................................7

“AQUA PRIMA” WATER FILTER (OPTIONAL) ...............................................................................................8

CONTROL PANEL .............................................................................................................9

ADJUSTMENTS ..............................................................................................................10

COFFEE VOLUME ADJUSTMENT PER CUP ..............................................................................................10

DRIP TRAY HEIGHT ADJUSTMENT ............................................................................................................10

COFFEE GRINDER ADJUSTMENT .............................................................................................................10

COFFEE BREWING AND HOT WATER DISPENSING ..................................................11

COFFEE BREWING ......................................................................................................................................11

HOT WATER DISPENSING ..........................................................................................................................11

CAPPUCCINO .................................................................................................................12

DESCALING ....................................................................................................................14

CLEANING AND MAINTENANCE ...................................................................................16

HOW TO CLEAN THE MACHINE .................................................................................................................16

CLEANING THE BREW GROUP ..................................................................................................................17

TROUBLESHOOTING .....................................................................................................18

SAFETY RULES ..............................................................................................................19

TECHNICAL DATA ...........................................................................................................21

5

GENERAL INFORMATION

This coffee machine is suitable for preparing espresso coffee using coffee beans and it is equipped with

a device to dispense steam and hot water.

The machine is designed for domestic use and is not suitable for heavy or professional use.

Warning: no liability is assumed for any damage caused by:

• incorrect use not in accordance with the intended uses;

• repairs not carried out by authorized customer service centres;

• tampering with the power cable;

• tampering with any part of the machine;

• the use of non-original spare parts and accessories;

• failure to descale the machine or use at temperatures below 0°C (32°F).

IN THESE CASES, THE WARRANTY IS NOT VALID.

THE WARNING TRIANGLE INDICATES ALL IMPORTANT

INSTRUCTIONS FOR THE USER’S SAFETY. PLEASE FOLLOW THESE

INSTRUCTIONS CAREFULLY TO PREVENT SERIOUS INJURIES!

HOW TO USE THESE OPERATING INSTRUCTIONS.

Keep these operating instructions in a safe place and make them available to anyone else who would use the

coffee machine. For further information or in case of problems, please refer to any authorized service centre.

KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.

6

APPLIANCE

ACCESSORIES

“Aqua Prima”

water ﬁ lter (optional)

Power cable

Cleaning brush

Brew Group

Dregs drawer

Socket for power cable

Coffee bean hopper

Cup stacking surface

Power button

Service door

Coffee bean hopper cover

Drip tray

Control panel

Dispensing head

Drip tray + grill and ﬂ oat

Hot water / steam

spout

Water tank

Hot water / steam knob

Grinder adjustment key

7

1 2

8

3

4 5 6

9

INSTALLATION

STARTING THE MACHINE

Make sure the power button is not pressed and that the machine is turned off. Check the machine

features on the label on the bottom of the appliance.

Lift the cover of the coffee bean

hopper.

Remove the water tank.

We recommend installing the

“Aqua Prima” water ﬁ lter (see

page 8).

Fill the container with coffee

beans. Close the cover placing

it correctly on the hopper.

Fill the tank with fresh drinking

water up to the MAX level.

Reinsert the tank.

Firmly push down the power

button to turn on the machine.

The machine performs a self-

test.

Insert the plug into the socket

located in the rear panel of the

machine and insert the other

end into a socket with suitable

current.

Place a container beneath the

steam spout.

Turn the knob until the

position is reached.

Wait until a steady ﬂ ow of water

comes out of the spout.

8

12

1 2 3

5

10

4

11

The machine is ready for use.Turn the knob until it is in the

rest position ( ).

Remove the “Aqua Prima” ﬁ lter

from its packaging. Enter the

date of the current month.

Fill the tank with fresh water. Let

the ﬁ lter soak for 30 minutes.

After 30 minutes discard the

water in the tank and reﬁ ll with

fresh water.

Insert the ﬁ lter in the empty tank.

The reference mark and the

groove must match. Push ﬁ rmly

until it is completely inserted.

Place a container beneath the steam

spout. Dispense the water in the

tank using the hot water function

(see page 11).

Fill the tank again with fresh

drinking water.

The machine is ready for use.

“AQUA PRIMA” WATER FILTER (OPTIONAL)

To improve the quality of the water you use, it is recommended to install the “Aqua Prima” ﬁ lter. Before

using it, leave the ﬁ lter immersed in the tank for 30 minutes.

“AQUA PRIMA” WATER FILTER

When the correct temperature is reached, the machine performs a rinse cycle of the internal circuits. A small

amount of water is dispensed; during this phase, the lights ﬂ ash counterclockwise. Wait for this cycle to be

completed.

Remove the container.

9

CONTROL PANEL

Coffee dose adjusting knob (see page 10).

Coffee button:

• the button has been pushed once:1 coffee has been selected.

• the button has been pushed twice: 2 coffees have been selected.

Hot water/steam button:

• on: steam function is selected

• off: hot water function is

selected

Alarm light:

• permanently on (one or more events): signals the machine is out of coffee, that the

water tank is empty, or the dregs drawer is full.

• on and slowly ﬂ ashing (one or more events): signals that the Brew Group is not

inserted, the dregs drawer is not inserted, the cover of the coffee hopper is not inserted

or the service door is open.

• on and quickly ﬂ ashing: signals the need to prime the water circuit.

Descaling light:

• on and ﬂ ashing: signals the need to perform a descaling cycle (see page 14).

Machine ready light:

• permanently on: signals that the machine is ready for use.

• on and ﬂ ashing: signals that the machine is warming up.

• on and quickly ﬂ ashing: signals that the machine is too warm; dispense water.

Alarm light to empty the dregs drawer:

• permanently on: signals the need to empty the dregs drawer; this operation must be

performed with the machine turned on (steps 4 and 5, page 16).

The and lights ﬂ ash alternately: switch off the machine and turn it on again after 30 seconds. If this

signal appears again, contact the customer service centre.

10

ADJUSTMENTS

COFFEE VOLUME ADJUSTMENT PER CUP

DRIP TRAY HEIGHT ADJUSTMENT

The coffee volume knob adjusts the

amount of coffee brewed per cup.

This adjustment has an immediate effect

on the selected type of brewing.

The drip tray is height-adjustable to ﬁ t different

sized cups.

To adjust the drip tray, lift it or lower it manually

until it reaches the desired height.

Note: a red ﬂ oat is visible in the tray; when it

lifts, the tray must be drained.

Medium coffee

Long coffee

Espresso coffee

COFFEE GRINDER ADJUSTMENT

The machine enables a slight adjustment of the coffee grinder. Coffee may be ground according to your

own tastes.

The adjustment must be performed turning the pin

– located inside the coffee container – by means of

the supplied key only.

Turn the pin one setting at a time and brew 2-3 cups

of coffee; the change in the grind will be noticeable

after a couple of cycles.

The references located inside the container indicate

the grind setting.

FINE GRIND MEDIUM GRIND COARSE GRIND

11

2

1 3

COFFEE BREWING AND HOT WATER DISPENSING

COFFEE BREWING

The coffee brewing cycle can be interrupted at any moment by pushing the button. To brew 2 cups,

the machine dispenses half of the entered quantity and brieﬂ y interrupts dispensing in order to grind the

second serving of coffee. Coffee dispensing is then restarted and completed.

Adjust the drip tray according to

the height of the cup/s.

Place two cups if you want two

coffees.

Place one cup if you want one

coffee only.

Adjust the quantity of coffee by

turning the knob.

The machine automatically

starts brewing coffee. When the

machine has ﬁ nished brewing,

remove the cup/s.

Press the central button:

once for 1 coffee

twice for 2 coffees

Dispensing may be preceded by short sprays of hot water, and scalding is possible. The

hot water/steam spout may reach high temperatures: do not touch it with bare hands. Use

the appropriate handle only.

Adjust the height of the drip tray. Place a container beneath the

steam spout.

HOT WATER DISPENSING

Turn the knob until the

position is reached.

1 2 3

4 5 6

12

4 6

2 3

5

1

64 5

Wait for the container to be

ﬁ lled with the desired quantity

of water.

HOT WATER DISPENSING - CAPPUCCINO

Remove the container.

CAPPUCCINO

Dispensing may be preceded by short sprays of hot water, and scalding is possible. The

hot water/steam spout may reach high temperatures: do not touch it with bare hands. Use

the appropriate handle only.

Turn the knob until it is in the

rest position ( ).

Adjust the height of the drip tray. Place a container beneath the

steam spout.

Fill 1/3 of the cup with cold milk.

Turn the knob until the

position is reached.

Press the button to select the

steam function. The steam light

turns on.

The indicator light starts

ﬂ ashing. Wait until the indicator

is permanently on.

13

7 9

11

17

8

10 12

13 14 15

16

CAPPUCCINO

After frothing the milk, brew

coffee into the cup for a

creamy cappuccino.

Drain any residual water and

wait until the spout ejects steam

only.

Immerse the steam spout in

the milk.

Froth the milk by gently swirling

the container.

Remove the container. When

the spout is cold, disassemble it

and wash it carefully.

Turn the knob until it is in the rest

position ( ).

Turn the knob until the

position is reached.

Turn the knob until it is in the rest

position ( ).

Place a container beneath the

steam spout.

Press the button to dispense

water. The indicator ﬂ ashes.

Turn the knob until the

position is reached and

dispense water.

When the machine ready indicator

is permanently on, turn the knob

until it is in the rest position.

14

2 31

4 5 6

DESCALING

When performing a descaling cycle, it is necessary to be present during the entire process

(about 40 minutes).

Caution! Do not use vinegar as a descaler.

The descaling must be done when indicated by the machine. Use a non-toxic, non-harmful descaling

solution. Saeco descaling solution is recommended.

The used solution should be disposed according to the manufacturer instructions and/or regulations in the

country of use.

Note: before starting a descaling cycle make sure that:

1 a container of adequate size is available;

2 if the “Aqua Prima” ﬁ lter is used, make sure that it has been removed.

When the descaling light is

ﬂ ashing, a descaling cycle must

be performed.

Place a large container beneath

the steam spout.

Empty the tank and reﬁ ll it,

dissolving the descaling solution

in a full tank of water.

Turn the knob until the

position is reached. Dispense

the descaling solution into the

container for 15 seconds.

Turn the knob until it is in the

rest position ( ).

Empty the container with the

used descaling solution.

15

7 8

10

9

11 12

13

3

7

14

Press the button to turn off the

machine. After 10 minutes, turn

on the machine again.

Repeat steps 3 - 7 until all the

descaling solution in the tank

has been dispensed.

Rinse and ﬁ ll the tank with fresh

drinking water.

Place a large container beneath

the steam spout.

Turn the knob until the

position is reached to empty the

water tank.

When this operation is completed,

turn the knob until it is in the rest

position ( ).

Press the hot water button

for 6 seconds to disable the

descaling alarm.

Fill the tank again with fresh

drinking water.

Once descaling has been performed:

1. Install the “Aqua Prima” ﬁ lter, if available;

2. Prime the circuit as described on page 7, from step 7.

The machine is ready for use.

16

8

1 2 3

4 5 6

7

CLEANING AND MAINTENANCE

Turn off the machine and

unplug it.

Remove the drip tray and wash

it under running water.

Remove the ﬁ lter, if ﬁ tted, and

wash the water tank.

Remove the dregs drawer. Remove and wash the steam

spout. Wash all external

components.

Empty the coffee grounds and

the residual liquids separately.

Wash all containers.

HOW TO CLEAN THE MACHINE

The machine must be cleaned at least once a week.

Do not immerse the machine in water or place any of its parts in a dishwasher.

Do not use alcohol, solvents, benzene and/or abrasive objects to clean the machine.

The water left in the tank for several days must be disposed of.

Do not dry the machine and/or its components using a microwave and/or conventional oven.

Remove and wash the

handgrip.

Before ﬁ lling the coffee bean

hopper, clean it using a soft wet

cloth.

If the dregs drawer is emptied

with the machine turned off, or

when the alarm light to empty

the dregs drawer is not on (see

page 9), the count of the coffee

portions contained in the dregs

drawer is not restarted. For this

reason, the alarm light to empty

dregs drawer may illuminate

even when it is not full.

17

2 3

4 6

7

5

1

Press the “PUSH” button to

remove the group.

Make sure the group is in rest

position; the two references must

match.

Wash the Brew Group with

running water. Wash ﬁ lters

carefully.

CLEANING THE BREW GROUP

The Brew Group must be cleaned at least once a week. Before removing the Brew Group, remove the

dregs drawer as shown in ﬁ g. 4 on page 16. Once you have washed and inserted the Brew Group, insert

the dregs drawer and close the service door.

Make sure the components are in

the correct position.

The hook shown must be in the

correct position; to check its

position, ﬁ rmly press the “PUSH”

button.

Insert the washed and dried Brew

Group.

DO NOT PRESS THE “PUSH”

BUTTON.

Insert the dregs drawer and close

the service door.

The lever on the rear part of the

group must be in contact with

the Brew Group base.

18

PROBLEMS CAUSES SOLUTIONS

The machine does not turn on. The machine is not connected to the

power source.

Connect the machine to the power

source.

The plug has not been plugged into

the back of the machine.

Insert the plug into the machine’s power

socket.

Coffee is not hot enough. The cups are cold. Warm the cups with hot water.

Hot water or steam is not

dispensed.

The hole of the steam spout is

clogged.

Clean the hole of the steam spout using

a pin.

Coffee has little crema. The coffee blend is unsuitable or

coffee is not freshly roasted.

Change coffee blend.

The machine takes a long time to

warm up or the amount of water

dispensed from the spout is too

little.

The machine circuit is obstructed by

limescale build-up.

Descale the machine.

The Brew Group does not come out. The Brew Group is out of place. Turn the machine on. Close the service

door. The Brew Group is automatically

placed in the correct position.

Dregs drawer is inserted. Remove the dregs drawer ﬁ rst, then the

brew group.

Coffee is not brewed. Water tank is empty. Fill the water tank and prime the circuit

again.

Brew group is dirty. Clean the Brew Group.

Circuit is not primed. Prime the circuit again by dispensing

water from the steam spout.

Knob to adjust the quantity of coffee

per cup is in wrong position.

Turn the knob clockwise.

Coffee is brewed slowly. Coffee is too ﬁ ne. Change coffee blend.

Circuit is not primed. Prime the circuit again by dispensing

water from the spout.

Brew Group dirty. Clean the Brew Group.

Coffee leaks out of the dispensing

head.

Dispensing head is clogged. Clean the dispensing holes with a soft

cloth.

Brewing does not start. Coffee bean hopper cover is in

wrong position.

Correctly place the cover on the coffee

bean hopper and press it ﬁ rmly.

Please contact the service centre for any problems not covered in the above table or when the

suggested solutions do not solve the problem.

TROUBLESHOOTING

19

IN CASE OF EMERGENCY

Immediately unplug the cable from the outlet.

USE THE APPLIANCE ONLY

- Indoors.

- To prepare coffee, dispense hot water, froth milk or heat beverages using steam.

- For domestic use only.

- By adults in non altered psycho-physical conditions.

NEVER USE THE APPLIANCE

For purposes other than those indicated above, in order to avoid danger.

Do not introduce any substances other than those indicated in the instruction manual.

During the normal ﬁ lling of any reservoirs, all nearby reservoirs must be closed.

Fill the water tank only with fresh drinking water: Hot water and/or any other liquid may damage the machine.

Do not use carbonated water.

Do not put ﬁ ngers or any material other than coffee beans in the coffee grinder. Before manipulating the coffee

grinder, turn off the machine’s main switch and unplug the cable.

POWER CONNECTION

Only connect the coffee machine to a suitable power socket. The voltage must correspond to the indication on the

machine’s label.

INSTALLATION

- Choose a level surface. Do not place on heated surfaces!

- Allow a distance of 10 cm (4 in) between walls and cooking hotplates.

- Do not keep the machine at temperatures below 0°C (32°F) – danger of freezing damage.

- There must be easy access to the socket at all times.

- The power cable must not be damaged, tied up with clamps, placed on very hot surfaces, etc.

- The power cable must not hang. (Danger of tripping or dropping the appliance).

- Do not use the power cable to carry or pull the coffee machine.

DANGER

- The appliance must not be used by children and persons who have not been informed on its operation.

- The appliance is dangerous to children. If left unattended, please disable it.

- Do not leave the coffee machine packaging within the reach of children.

- Never direct the jet of hot water and/or steam towards yourself or others. Danger of scalding.

- Do not insert objects through the appliance’s openings (Danger! Electrical current!).

- Do not touch the plug with wet hands and feet. Do not remove the plug by pulling the cable.

- Warning, danger of burns caused by hot water, steam and hot water/steam spout.

SAFETY RULES

20

SAFETY RULES

FAILURES

- Do not use the appliance in case of sure or suspected faults such as after falls.

- Any repairs must be performed by an authorized customer service centre.

- Do not use the appliance with a defective power cable. If damaged, the power cable must be replaced by the

manufacturer or authorized service centre. (Caution! Electrical current).

- Turn off the appliance before opening the service door.

CLEANING / DESCALING

- Before cleaning, unplug the machine and let the appliance cool.

- Keep the appliance from coming into contact with splashes of water or immersing in water.

- Do not dry the machine’s parts in conventional or microwave ovens.

SPARE PARTS

For safety reasons, use only original spare parts and original accessories.

DISPOSAL

- The packing materials can be recycled.

- Appliance: unplug the appliance and cut the power cord.

- Deliver the appliance and power cord to a service center or public waste disposal facility.

This product complies with EU Directive 2002/96/EC.

The symbol on the product or on its packaging indicates that this product may not be treated as

household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical

and electronic equipment.

By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for

the environment and human health, which could otherwise be caused by inappropriate waste handling of this

product. For more detailed information about recycling of this product, please contact your local city ofﬁ ce, your

household waste disposal service or the retailer where you purchased the product.

La page charge ...

Saeco Odea Go Operating And Maintenance Manual

Saeco Odea Go Operating And Maintenance Manual

dans d''autres langues

Documents connexes

Autres documents